diff options
Diffstat (limited to 'drivers/bus/mhi/pci_generic.c')
| -rw-r--r-- | drivers/bus/mhi/pci_generic.c | 345 |
1 files changed, 345 insertions, 0 deletions
diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c new file mode 100644 index 000000000000..e3df838c3c80 --- /dev/null +++ b/drivers/bus/mhi/pci_generic.c @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MHI PCI driver - MHI over PCI controller driver + * + * This module is a generic driver for registering MHI-over-PCI devices, + * such as PCIe QCOM modems. + * + * Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org> + */ + +#include <linux/device.h> +#include <linux/mhi.h> +#include <linux/module.h> +#include <linux/pci.h> + +#define MHI_PCI_DEFAULT_BAR_NUM 0 + +/** + * struct mhi_pci_dev_info - MHI PCI device specific information + * @config: MHI controller configuration + * @name: name of the PCI module + * @fw: firmware path (if any) + * @edl: emergency download mode firmware path (if any) + * @bar_num: PCI base address register to use for MHI MMIO register space + * @dma_data_width: DMA transfer word size (32 or 64 bits) + */ +struct mhi_pci_dev_info { + const struct mhi_controller_config *config; + const char *name; + const char *fw; + const char *edl; + unsigned int bar_num; + unsigned int dma_data_width; +}; + +#define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \ + { \ + .num = ch_num, \ + .name = ch_name, \ + .num_elements = el_count, \ + .event_ring = ev_ring, \ + .dir = DMA_TO_DEVICE, \ + .ee_mask = BIT(MHI_EE_AMSS), \ + .pollcfg = 0, \ + .doorbell = MHI_DB_BRST_DISABLE, \ + .lpm_notify = false, \ + .offload_channel = false, \ + .doorbell_mode_switch = false, \ + } \ + +#define MHI_CHANNEL_CONFIG_DL(ch_num, ch_name, el_count, ev_ring) \ + { \ + .num = ch_num, \ + .name = ch_name, \ + .num_elements = el_count, \ + .event_ring = ev_ring, \ + .dir = DMA_FROM_DEVICE, \ + .ee_mask = BIT(MHI_EE_AMSS), \ + .pollcfg = 0, \ + .doorbell = MHI_DB_BRST_DISABLE, \ + .lpm_notify = false, \ + .offload_channel = false, \ + .doorbell_mode_switch = false, \ + } + +#define MHI_EVENT_CONFIG_CTRL(ev_ring) \ + { \ + .num_elements = 64, \ + .irq_moderation_ms = 0, \ + .irq = (ev_ring) + 1, \ + .priority = 1, \ + .mode = MHI_DB_BRST_DISABLE, \ + .data_type = MHI_ER_CTRL, \ + .hardware_event = false, \ + .client_managed = false, \ + .offload_channel = false, \ + } + +#define MHI_EVENT_CONFIG_DATA(ev_ring) \ + { \ + .num_elements = 128, \ + .irq_moderation_ms = 5, \ + .irq = (ev_ring) + 1, \ + .priority = 1, \ + .mode = MHI_DB_BRST_DISABLE, \ + .data_type = MHI_ER_DATA, \ + .hardware_event = false, \ + .client_managed = false, \ + .offload_channel = false, \ + } + +#define MHI_EVENT_CONFIG_HW_DATA(ev_ring, ch_num) \ + { \ + .num_elements = 128, \ + .irq_moderation_ms = 5, \ + .irq = (ev_ring) + 1, \ + .priority = 1, \ + .mode = MHI_DB_BRST_DISABLE, \ + .data_type = MHI_ER_DATA, \ + .hardware_event = true, \ + .client_managed = false, \ + .offload_channel = false, \ + .channel = ch_num, \ + } + +static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = { + MHI_CHANNEL_CONFIG_UL(12, "MBIM", 4, 0), + MHI_CHANNEL_CONFIG_DL(13, "MBIM", 4, 0), + MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0), + MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0), + MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0), + MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0), + MHI_CHANNEL_CONFIG_UL(100, "IP_HW0", 128, 1), + MHI_CHANNEL_CONFIG_DL(101, "IP_HW0", 128, 2), +}; + +static const struct mhi_event_config modem_qcom_v1_mhi_events[] = { + /* first ring is control+data ring */ + MHI_EVENT_CONFIG_CTRL(0), + /* Hardware channels request dedicated hardware event rings */ + MHI_EVENT_CONFIG_HW_DATA(1, 100), + MHI_EVENT_CONFIG_HW_DATA(2, 101) +}; + +static const struct mhi_controller_config modem_qcom_v1_mhiv_config = { + .max_channels = 128, + .timeout_ms = 5000, + .num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels), + .ch_cfg = modem_qcom_v1_mhi_channels, + .num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events), + .event_cfg = modem_qcom_v1_mhi_events, +}; + +static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { + .name = "qcom-sdx55m", + .fw = "qcom/sdx55m/sbl1.mbn", + .edl = "qcom/sdx55m/edl.mbn", + .config = &modem_qcom_v1_mhiv_config, + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32 +}; + +static const struct pci_device_id mhi_pci_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), + .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, + { } +}; +MODULE_DEVICE_TABLE(pci, mhi_pci_id_table); + +static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl, + void __iomem *addr, u32 *out) +{ + *out = readl(addr); + return 0; +} + +static void mhi_pci_write_reg(struct mhi_controller *mhi_cntrl, + void __iomem *addr, u32 val) +{ + writel(val, addr); +} + +static void mhi_pci_status_cb(struct mhi_controller *mhi_cntrl, + enum mhi_callback cb) +{ + /* Nothing to do for now */ +} + +static int mhi_pci_claim(struct mhi_controller *mhi_cntrl, + unsigned int bar_num, u64 dma_mask) +{ + struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev); + int err; + + err = pci_assign_resource(pdev, bar_num); + if (err) + return err; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "failed to enable pci device: %d\n", err); + return err; + } + + err = pcim_iomap_regions(pdev, 1 << bar_num, pci_name(pdev)); + if (err) { + dev_err(&pdev->dev, "failed to map pci region: %d\n", err); + return err; + } + mhi_cntrl->regs = pcim_iomap_table(pdev)[bar_num]; + + err = pci_set_dma_mask(pdev, dma_mask); + if (err) { + dev_err(&pdev->dev, "Cannot set proper DMA mask\n"); + return err; + } + + err = pci_set_consistent_dma_mask(pdev, dma_mask); + if (err) { + dev_err(&pdev->dev, "set consistent dma mask failed\n"); + return err; + } + + pci_set_master(pdev); + + return 0; +} + +static int mhi_pci_get_irqs(struct mhi_controller *mhi_cntrl, + const struct mhi_controller_config *mhi_cntrl_config) +{ + struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev); + int nr_vectors, i; + int *irq; + + /* + * Alloc one MSI vector for BHI + one vector per event ring, ideally... + * No explicit pci_free_irq_vectors required, done by pcim_release. + */ + mhi_cntrl->nr_irqs = 1 + mhi_cntrl_config->num_events; + + nr_vectors = pci_alloc_irq_vectors(pdev, 1, mhi_cntrl->nr_irqs, PCI_IRQ_MSI); + if (nr_vectors < 0) { + dev_err(&pdev->dev, "Error allocating MSI vectors %d\n", + nr_vectors); + return nr_vectors; + } + + if (nr_vectors < mhi_cntrl->nr_irqs) { + dev_warn(&pdev->dev, "Not enough MSI vectors (%d/%d), use shared MSI\n", + nr_vectors, mhi_cntrl_config->num_events); + } + + irq = devm_kcalloc(&pdev->dev, mhi_cntrl->nr_irqs, sizeof(int), GFP_KERNEL); + if (!irq) + return -ENOMEM; + + for (i = 0; i < mhi_cntrl->nr_irqs; i++) { + int vector = i >= nr_vectors ? (nr_vectors - 1) : i; + + irq[i] = pci_irq_vector(pdev, vector); + } + + mhi_cntrl->irq = irq; + + return 0; +} + +static int mhi_pci_runtime_get(struct mhi_controller *mhi_cntrl) +{ + /* no PM for now */ + return 0; +} + +static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl) +{ + /* no PM for now */ +} + +static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data; + const struct mhi_controller_config *mhi_cntrl_config; + struct mhi_controller *mhi_cntrl; + int err; + + dev_dbg(&pdev->dev, "MHI PCI device found: %s\n", info->name); + + mhi_cntrl = mhi_alloc_controller(); + if (!mhi_cntrl) + return -ENOMEM; + + mhi_cntrl_config = info->config; + mhi_cntrl->cntrl_dev = &pdev->dev; + mhi_cntrl->iova_start = 0; + mhi_cntrl->iova_stop = DMA_BIT_MASK(info->dma_data_width); + mhi_cntrl->fw_image = info->fw; + mhi_cntrl->edl_image = info->edl; + + mhi_cntrl->read_reg = mhi_pci_read_reg; + mhi_cntrl->write_reg = mhi_pci_write_reg; + mhi_cntrl->status_cb = mhi_pci_status_cb; + mhi_cntrl->runtime_get = mhi_pci_runtime_get; + mhi_cntrl->runtime_put = mhi_pci_runtime_put; + + err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width)); + if (err) + goto err_release; + + err = mhi_pci_get_irqs(mhi_cntrl, mhi_cntrl_config); + if (err) + goto err_release; + + pci_set_drvdata(pdev, mhi_cntrl); + + err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config); + if (err) + goto err_release; + + /* MHI bus does not power up the controller by default */ + err = mhi_prepare_for_power_up(mhi_cntrl); + if (err) { + dev_err(&pdev->dev, "failed to prepare MHI controller\n"); + goto err_unregister; + } + + err = mhi_sync_power_up(mhi_cntrl); + if (err) { + dev_err(&pdev->dev, "failed to power up MHI controller\n"); + goto err_unprepare; + } + + return 0; + +err_unprepare: + mhi_unprepare_after_power_down(mhi_cntrl); +err_unregister: + mhi_unregister_controller(mhi_cntrl); +err_release: + mhi_free_controller(mhi_cntrl); + + return err; +} + +static void mhi_pci_remove(struct pci_dev *pdev) +{ + struct mhi_controller *mhi_cntrl = pci_get_drvdata(pdev); + + mhi_power_down(mhi_cntrl, true); + mhi_unprepare_after_power_down(mhi_cntrl); + mhi_unregister_controller(mhi_cntrl); + mhi_free_controller(mhi_cntrl); +} + +static struct pci_driver mhi_pci_driver = { + .name = "mhi-pci-generic", + .id_table = mhi_pci_id_table, + .probe = mhi_pci_probe, + .remove = mhi_pci_remove +}; +module_pci_driver(mhi_pci_driver); + +MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>"); +MODULE_DESCRIPTION("Modem Host Interface (MHI) PCI controller driver"); +MODULE_LICENSE("GPL"); |