summaryrefslogtreecommitdiff
path: root/arch/sh/boards/board-ap325rxa.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/board-ap325rxa.c')
-rw-r--r--arch/sh/boards/board-ap325rxa.c64
1 files changed, 52 insertions, 12 deletions
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 1c67cba6e34f..15b6d450fbf0 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -18,8 +18,11 @@
#include <linux/mtd/sh_flctl.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
@@ -27,12 +30,14 @@
#include <asm/clock.h>
#include <cpu/sh7723.h>
-static struct smc911x_platdata smc911x_info = {
- .flags = SMC911X_USE_32BIT,
- .irq_flags = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
};
-static struct resource smc9118_resources[] = {
+static struct resource smsc9118_resources[] = {
[0] = {
.start = 0xb6080000,
.end = 0xb60fffff,
@@ -45,13 +50,13 @@ static struct resource smc9118_resources[] = {
}
};
-static struct platform_device smc9118_device = {
- .name = "smc911x",
+static struct platform_device smsc9118_device = {
+ .name = "smsc911x",
.id = -1,
- .num_resources = ARRAY_SIZE(smc9118_resources),
- .resource = smc9118_resources,
+ .num_resources = ARRAY_SIZE(smsc9118_resources),
+ .resource = smsc9118_resources,
.dev = {
- .platform_data = &smc911x_info,
+ .platform_data = &smsc911x_config,
},
};
@@ -212,6 +217,12 @@ static struct platform_device lcdc_device = {
},
};
+static void camera_power(int val)
+{
+ gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
+ mdelay(10);
+}
+
#ifdef CONFIG_I2C
static unsigned char camera_ncm03j_magic[] =
{
@@ -241,9 +252,11 @@ static int camera_set_capture(struct soc_camera_platform_info *info,
int ret = 0;
int i;
+ camera_power(0);
if (!enable)
return 0; /* no disable for now */
+ camera_power(1);
for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
u_int8_t buf[8];
@@ -315,8 +328,22 @@ static struct platform_device ceu_device = {
},
};
+struct spi_gpio_platform_data sdcard_cn3_platform_data = {
+ .sck = GPIO_PTD0,
+ .mosi = GPIO_PTD1,
+ .miso = GPIO_PTD2,
+ .num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn3_device = {
+ .name = "spi_gpio",
+ .dev = {
+ .platform_data = &sdcard_cn3_platform_data,
+ },
+};
+
static struct platform_device *ap325rxa_devices[] __initdata = {
- &smc9118_device,
+ &smsc9118_device,
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
@@ -324,6 +351,7 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
&camera_device,
#endif
&nand_flash_device,
+ &sdcard_cn3_device,
};
static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
@@ -332,6 +360,15 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
},
};
+static struct spi_board_info ap325rxa_spi_devices[] = {
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 5000000,
+ .chip_select = 0,
+ .controller_data = (void *) GPIO_PTD5,
+ },
+};
+
static int __init ap325rxa_devices_setup(void)
{
/* LD3 and LD4 LEDs */
@@ -398,7 +435,7 @@ static int __init ap325rxa_devices_setup(void)
gpio_request(GPIO_PTZ6, NULL);
gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
gpio_request(GPIO_PTZ5, NULL);
- gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */
+ gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
gpio_request(GPIO_PTZ4, NULL);
gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
@@ -429,6 +466,9 @@ static int __init ap325rxa_devices_setup(void)
i2c_register_board_info(0, ap325rxa_i2c_devices,
ARRAY_SIZE(ap325rxa_i2c_devices));
+ spi_register_board_info(ap325rxa_spi_devices,
+ ARRAY_SIZE(ap325rxa_spi_devices));
+
return platform_add_devices(ap325rxa_devices,
ARRAY_SIZE(ap325rxa_devices));
}