diff options
Diffstat (limited to 'arch/arm')
94 files changed, 578 insertions, 600 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342c..36586dba6fa6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1186,6 +1186,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" depends on CPU_V6 || CPU_V6K diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 6ce11c481178..797f04bedb47 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) } else if (atag->hdr.tag == ATAG_MEM) { if (memcount >= sizeof(mem_reg_property)/4) continue; + if (!atag->u.mem.size) + continue; mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start); mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size); } else if (atag->hdr.tag == ATAG_INITRD2) { diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 5f6045f1766c..dc7e8ce8e6be 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -273,7 +273,7 @@ restart: adr r0, LC0 add r0, r0, #0x100 mov r1, r6 sub r2, sp, r6 - blne atags_to_fdt + bleq atags_to_fdt ldmfd sp!, {r0-r3, ip, lr} sub sp, sp, #0x10000 diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 799ad1889b51..773ef484037a 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9e6eb6ecea0e..c8042147eaa2 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -56,7 +56,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 70ab3a4e026f..dd4ed748469a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -54,7 +54,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index d73dce645667..14bc30705099 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -24,7 +24,6 @@ #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xa0411000 0x1000>, <0xa0410100 0x100>; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 37c0ff9c8b90..83e72294aefb 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -89,7 +89,6 @@ #size-cells = <0>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 15ded0deaa79..45bc4bb04e57 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -10,7 +10,7 @@ intc: interrupt-controller@02080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <3>; reg = < 0x02080000 0x1000 >, < 0x02081000 0x1000 >; }; @@ -19,6 +19,6 @@ compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <195>; + interrupts = <0 195 0x0>; }; }; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 0b32925f2147..e2fe3195c0d1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -173,7 +173,7 @@ mmc@5000 { compatible = "arm,primecell"; reg = < 0x5000 0x1000>; - interrupts = <22>; + interrupts = <22 34>; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 166461073b78..7e8175269064 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -41,7 +41,7 @@ mmc@b000 { compatible = "arm,primecell"; reg = <0xb000 0x1000>; - interrupts = <23>; + interrupts = <23 34>; }; }; }; diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 7a66311f3066..7e288f96cedf 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) /* * Handle each interrupt in a single VIC. Returns non-zero if we've - * handled at least one interrupt. This does a single read of the - * status register and handles all interrupts in order from LSB first. + * handled at least one interrupt. This reads the status register + * before handling each interrupt, which is necessary given that + * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. */ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) { u32 stat, irq; int handled = 0; - stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); - while (stat) { + while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { irq = ffs(stat) - 1; handle_IRQ(irq_find_mapping(vic->domain, irq), regs); - stat &= ~(1 << irq); handled = 1; } diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index b5ac644e12af..6b31cb60daab 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_FB=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 42da9183acc8..082175c54e7c 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_ARCH_S3C24XX=y +# CONFIG_CPU_S3C2410 is not set +CONFIG_CPU_S3C2440=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 889d73ac1ae1..7e84f453e8a6 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y -CONFIG_UX500_SOC_DB5500=y -CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y @@ -39,7 +37,6 @@ CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y @@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y -CONFIG_I2C=y -CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_POWER_SUPPLY=y +CONFIG_AB8500_BM=y +CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index 5c5ca2ea62b0..bfc198c75913 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -14,7 +14,7 @@ #define JUMP_LABEL_NOP "nop" #endif -static __always_inline bool arch_static_branch(struct jump_label_key *key) +static __always_inline bool arch_static_branch(struct static_key *key) { asm goto("1:\n\t" JUMP_LABEL_NOP "\n\t" diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index d4c24d412a8d..0f04d84582e1 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *); extern void vfp_sync_hwstate(struct thread_info *); extern void vfp_flush_hwstate(struct thread_info *); +struct user_vfp; +struct user_vfp_exc; + +extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); +extern int vfp_restore_user_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); #endif /* diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index 60843eb0f61c..73409e6c0251 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h @@ -7,6 +7,8 @@ .macro set_tls_v6k, tp, tmp1, tmp2 mcr p15, 0, \tp, c13, c0, 3 @ set TLS register + mov \tmp1, #0 + mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register .endm .macro set_tls_v6, tp, tmp1, tmp2 @@ -15,6 +17,8 @@ mov \tmp2, #0xffff0fff tst \tmp1, #HWCAP_TLS @ hardware TLS available? mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register + movne \tmp1, #0 + mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0 .endm diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 71ccdbfed662..8349d4e97e2b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc) } c = irq_data_get_irq_chip(d); - if (c->irq_set_affinity) - c->irq_set_affinity(d, affinity, true); - else + if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); + else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + cpumask_copy(d->affinity, affinity); return ret; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b91411371ae1..ebfac782593f 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) */ size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); - bank->size = size & PAGE_MASK; + +#ifndef CONFIG_LPAE + if (bank->start + size < bank->start) { + printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " + "32-bit physical address space\n", (long long)start); + /* + * To ensure bank->start + bank->size is representable in + * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB. + * This means we lose a page after masking. + */ + size = ULONG_MAX - bank->start; + } +#endif + + bank->size = size & PAGE_MASK; /* * Check whether this memory region has non-zero size or diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 7cb532fc8aa4..d68d1b694680 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame) static int preserve_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; const unsigned long magic = VFP_MAGIC; const unsigned long size = VFP_STORAGE_SIZE; int err = 0; - vfp_sync_hwstate(thread); __put_user_error(magic, &frame->magic, err); __put_user_error(size, &frame->size, err); - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __put_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Copy the exception registers. - */ - __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err); - __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + if (err) + return -EFAULT; - return err ? -EFAULT : 0; + return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc); } static int restore_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; unsigned long magic; unsigned long size; - unsigned long fpexc; int err = 0; __get_user_error(magic, &frame->magic, err); @@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; - vfp_flush_hwstate(thread); - - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __get_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Sanitise and restore the exception registers. - */ - __get_user_error(fpexc, &frame->ufp_exc.fpexc, err); - /* Ensure the VFP is enabled. */ - fpexc |= FPEXC_EN; - /* Ensure FPINST2 is invalid and the exception flag is cleared. */ - fpexc &= ~(FPEXC_EX | FPEXC_FP2V); - h->fpexc = fpexc; - - __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - - return err ? -EFAULT : 0; + return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc); } #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index addbbe8028c2..f6a4d32b0421 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable(); -#ifdef CONFIG_HOTPLUG_CPU - platform_cpu_kill(cpu); -#endif - while (1) cpu_relax(); } @@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } +#ifdef CONFIG_HOTPLUG_CPU +static void smp_kill_cpus(cpumask_t *mask) +{ + unsigned int cpu; + for_each_cpu(cpu, mask) + platform_cpu_kill(cpu); +} +#else +static void smp_kill_cpus(cpumask_t *mask) { } +#endif + void smp_send_stop(void) { unsigned long timeout; + struct cpumask mask; - if (num_online_cpus() > 1) { - struct cpumask mask; - cpumask_copy(&mask, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &mask); - - smp_cross_call(&mask, IPI_CPU_STOP); - } + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); + smp_cross_call(&mask, IPI_CPU_STOP); /* Wait up to one second for other CPUs to stop */ timeout = USEC_PER_SEC; @@ -595,6 +599,8 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); + + smp_kill_cpus(&mask); } /* diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 99ce5c955e39..05774e5b1cba 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void) printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index dd7f782b0b91..104ca40d8d18 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clockchips.h> +#include <linux/export.h> #include <asm/mach/time.h> @@ -176,6 +177,7 @@ static struct clock_event_device clkevt = { }; void __iomem *at91_st_base; +EXPORT_SYMBOL_GPL(at91_st_base); void __init at91rm9200_ioremap_st(u32 addr) { diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 11cbaa8946fe..b2e4fe21f346 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = { }; #define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M +#define EK_FLASH_SIZE SZ_8M static struct physmap_flash_data ek_flash_data = { .width = 2, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c3f994462864..065fed342424 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = AT91_PIN_PC11, - .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } @@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { + struct resource *r = &dm9000_resource[2]; + /* Configure chip-select 2 (DM9000) */ sam9_smc_configure(0, 2, &dm9000_smc_config); @@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void) /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PC11, 0); + r->start = r->end = gpio_to_irq(AT91_PIN_PC11); platform_device_register(&dm9000_device); } #else diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index a0f4d7424cdc..6b692824c988 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -35,6 +35,7 @@ #include "generic.h" void __iomem *at91_pmc_base; +EXPORT_SYMBOL_GPL(at91_pmc_base); /* * There's a lot more which can be done with clocks, including cpufreq diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 36604782a78f..ea2c57a86ca6 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base; #define at91_pmc_write(field, value) \ __raw_writel(value, at91_pmc_base + field) #else -.extern at91_aic_base +.extern at91_pmc_base #endif #define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 97cc04dc8073..f44a2e7272e3 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority) } void __iomem *at91_ramc_base[2]; +EXPORT_SYMBOL_GPL(at91_ramc_base); void __init at91_ioremap_ramc(int id, u32 addr, u32 size) { @@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr) } void __iomem *at91_matrix_base; +EXPORT_SYMBOL_GPL(at91_matrix_base); void __init at91_ioremap_matrix(u32 base_addr) { diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 22e4e0a28ad1..adbfb1994582 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,8 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); -static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); +static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); +static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0491ceef1cda..e81c35f936b5 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + depends on ARCH_EXYNOS4 select CPU_EXYNOS4210 select USE_OF select ARM_AMBA @@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" + depends on ARCH_EXYNOS5 select SOC_EXYNOS5250 select USE_OF select ARM_AMBA diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index df54c2a92225..6efd1e5919fd 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 3), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = { static struct clksrc_clk exynos4_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_dout_mmc0.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = { static struct clksrc_clk exynos4_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_dout_mmc1.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = { static struct clksrc_clk exynos4_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_dout_mmc2.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = { static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_dout_mmc3.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index d013982d0f8e..5cd7a8b8868c 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 20), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 14), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 15), @@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = { static struct clksrc_clk exynos5_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_dout_mmc0.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = { static struct clksrc_clk exynos5_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_dout_mmc1.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = { static struct clksrc_clk exynos5_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_dout_mmc2.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = { static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_dout_mmc3.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 8614aab47cc0..5ccd6e80a607 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,6 +326,11 @@ static void __init exynos4_map_io(void) s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -344,6 +349,11 @@ static void __init exynos5_map_io(void) s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -537,7 +547,9 @@ void __init exynos5_init_irq(void) { int irq; - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); +#ifdef CONFIG_OF + of_irq_init(exynos4_dt_irq_match); +#endif for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c index b025db4bf602..79035018fb74 100644 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ b/arch/arm/mach-exynos/dev-dwmci.c @@ -16,6 +16,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/ioport.h> #include <linux/mmc/dw_mmc.h> #include <plat/devs.h> @@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) } static struct resource exynos4_dwmci_resource[] = { - [0] = { - .start = EXYNOS4_PA_DWMCI, - .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DWMCI, - .end = IRQ_DWMCI, - .flags = IORESOURCE_IRQ, - } + [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), + [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), }; static struct dw_mci_board exynos4_dwci_pdata = { diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 9bee8535d9e0..591e78521a9f 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -212,6 +212,8 @@ #define IRQ_MFC EXYNOS4_IRQ_MFC #define IRQ_SDO EXYNOS4_IRQ_SDO +#define IRQ_I2S0 EXYNOS4_IRQ_I2S0 + #define IRQ_ADC EXYNOS4_IRQ_ADC0 #define IRQ_TC EXYNOS4_IRQ_PEN0 diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 024d38ff1718..6e6d11ff352a 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -89,6 +89,10 @@ #define EXYNOS4_PA_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 +#define EXYNOS5_PA_MDMA0 0x10800000 +#define EXYNOS5_PA_MDMA1 0x11C10000 +#define EXYNOS5_PA_PDMA0 0x121A0000 +#define EXYNOS5_PA_PDMA1 0x121B0000 #define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 #define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index e141c1fd68d8..d9578a58ae7f 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -255,9 +255,15 @@ /* For EXYNOS5250 */ +#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000) #define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100) #define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200) +#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400) #define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500) +#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504) +#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600) +#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604) + #define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) #define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 0d26f50081ad..4711c8920e37 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-uart.3", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), {}, }; diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b3982c867c9c..ed90aef404c3 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -307,49 +308,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = { }; /* TSP */ -static u8 mxt_init_vals[] = { - /* MXT_GEN_COMMAND(6) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_GEN_POWER(7) */ - 0x20, 0xff, 0x32, - /* MXT_GEN_ACQUIRE(8) */ - 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, - /* MXT_TOUCH_MULTI(9) */ - 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, - /* MXT_TOUCH_KEYARRAY(15) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, - /* MXT_SPT_GPIOPWM(19) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_GRIPFACE(20) */ - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, - 0x0f, 0x0a, - /* MXT_PROCG_NOISE(22) */ - 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, - 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, - /* MXT_TOUCH_PROXIMITY(23) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_ONETOUCH(24) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_SELFTEST(25) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_TWOTOUCH(27) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_CTECONFIG(28) */ - 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, -}; - static struct mxt_platform_data mxt_platform_data = { - .config = mxt_init_vals, - .config_length = ARRAY_SIZE(mxt_init_vals), - .x_line = 18, .y_line = 11, .x_size = 1024, @@ -571,7 +530,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = { static struct regulator_init_data __initdata max8997_ldo8_data = { .constraints = { - .name = "VUSB/VDAC_3.3V_C210", + .name = "VUSB+VDAC_3.3V_C210", .min_uV = 3300000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -1347,6 +1306,7 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); @@ -1379,7 +1339,6 @@ static void __init nuri_machine_init(void) nuri_camera_init(); nuri_ehci_init(); - clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 6bb9dbdd73fd..cb2b027f09a6 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -29,6 +29,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/iic.h> @@ -746,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -1057,6 +1059,7 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 861ceb8232d6..ed38d03c61f2 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { static int __init imx27_avic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np, { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - irq_domain_add_simple(np, gpio_irq_base); + gpio_irq_base -= 32; + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, + NULL); return 0; } diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 05250aed61fb..e10f3914fcfe 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -35,7 +35,7 @@ static void imx5_idle(void) } clk_enable(gpc_dvfs_clk); mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake() != 0) + if (!tzic_enable_wake()) cpu_do_idle(); clk_disable(gpc_dvfs_clk); } diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 3698a370d636..26aac363a064 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -86,9 +86,6 @@ static void __init halibut_init(void) static void __init halibut_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks=1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = (101*1024*1024); } static void __init halibut_map_io(void) diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 962e71169750..fb3496a52ef4 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -17,6 +17,7 @@ #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/memblock.h> @@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void) msm_map_msm8x60_io(); } +#ifdef CONFIG_OF +static struct of_device_id msm_dt_gic_match[] __initdata = { + { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, + {} +}; +#endif + static void __init msm8x60_init_irq(void) { - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); + if (!of_have_populated_dt()) + gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, + (void *)MSM_QGIC_CPU_BASE); +#ifdef CONFIG_OF + else + of_irq_init(msm_dt_gic_match); +#endif /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); @@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { {} }; -static struct of_device_id msm_dt_gic_match[] __initdata = { - { .compatible = "qcom,msm-8660-qgic", }, - {} -}; - static void __init msm8x60_dt_init(void) { - irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS, - GIC_SPI_START); - if (of_machine_is_compatible("qcom,msm8660-surf")) { printk(KERN_INFO "Init surf UART registers\n"); msm8x60_init_uart12dm(); diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 25105c1027fe..89bf6b426699 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -12,6 +12,7 @@ #include <asm/io.h> #include <asm/mach-types.h> +#include <asm/system_info.h> #include <mach/msm_fb.h> #include <mach/vreg.h> diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 5414f76ec0a9..d4060a37e23d 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <asm/system_info.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 67e701c7f183..9980dc736e7b 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) * and unknown state. This function should be called early to * wait on the ARM9. */ -void __init proc_comm_boot_wait(void) +void __devinit proc_comm_boot_wait(void) { void __iomem *base = MSM_SHARED_RAM_BASE; diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 087dba0df47e..e9cc52d4cb28 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <linux/spinlock.h> +#include <mach/hardware.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 6e90665a7c47..fb202af01d0d 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, int n = (pdev->id - 1) << 1; u32 l; - l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; - __raw_writel(l, MOD_CONF_CTRL_1); + omap_writel(l, MOD_CONF_CTRL_1); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b8..130ab00c09a2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b5170..098d183a0086 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f0126..1b782ba53433 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7072e0d651b1..3d9d746b221a 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap24xx()) - return; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap24xx()) - return; - - kfree(freq_table); -} - -#endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5baeccf..d9f4931513f9 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - /* These will be removed when the OPP code is integrated */ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, - .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, -#endif }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b8c2a686481c..a1bb23a23351 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ) -extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#else -#define omap2_clk_init_cpufreq_table 0 -#define omap2_clk_exit_cpufreq_table 0 -#endif - extern const struct clkops clkops_omap2_iclk_dflt_wait; extern const struct clkops clkops_omap2_iclk_dflt; extern const struct clkops clkops_omap2_iclk_idle_only; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2c27fdb61e66..7144ae651d3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) @@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - if (!oh) + u32 v; + int ret; + + if (!oh || !(oh->_sysc_cache)) return -EINVAL; - return _ocp_softreset(oh); + v = oh->_sysc_cache; + ret = _set_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + +error: + return ret; } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f323..a6bde34e443a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7d..04a3885f4475 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d23..db86ce90c69f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cc9bd106a854..6abc75753e42 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128e..9fc2f44188cb 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d1..7a7b89304c48 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27a..09627483a57f 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index c54cef25895c..cbf51ae81855 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -17,6 +17,7 @@ * * bit 23 - Input/Output (PXA2xx specific) * bit 24 - Wakeup Enable(PXA2xx specific) + * bit 25 - Keep Output (PXA2xx specific) */ #define MFP_DIR_IN (0x0 << 23) @@ -25,6 +26,12 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) + +/* + * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to + * retain their last output level (low or high). + * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input. + */ #define MFP_LPM_KEEP_OUTPUT (0x1 << 25) #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b0a842887780..ef0426a159d4 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -33,6 +33,8 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) #define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24) #define PWER_WE35 (1 << 24) @@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_gplr[4]; static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(void) @@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void) } for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { - saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_gplr[i] = GPLR(i * 32); saved_pgsr[i] = PGSR(i); - GPDR(i * 32) = gpdr_lpm[i]; + GPSR(i * 32) = PGSR(i); + GPCR(i * 32) = ~PGSR(i); + } + + /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) || + ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i)))) + GPDR(i) |= GPIO_bit(i); + else + GPDR(i) &= ~GPIO_bit(i); } + return 0; } @@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; + GPSR(i * 32) = saved_gplr[i]; + GPCR(i * 32) = ~saved_gplr[i]; GPDR(i * 32) = saved_gpdr[i]; PGSR(i) = saved_pgsr[i]; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 6bce78edce7a..4726c246dcdc 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa27x_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -458,6 +461,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0f3a327ebcaa..b34287ab5afd 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. -# cpu-specific sections - -if CPU_S3C2410 - config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) @@ -127,6 +123,10 @@ config S3C2410_PM help Power Management code common to S3C2410 and better +# cpu-specific sections + +if CPU_S3C2410 + config S3C24XX_SIMTEC_NOR bool help diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86ce62f66190..b8337e248b09 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -33,8 +33,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index a9ea64e0da0d..48d018f2332b 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 2cf5ed75f390..32395664e879 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -25,6 +25,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <linux/interrupt.h> #include <asm/hardware/vic.h> @@ -674,8 +675,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ @@ -765,6 +766,7 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7c524b4e415d..16be4c56abe3 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda) } static struct resource sa1100_rtc_resources[] = { - DEFINE_RES_MEM(0x90010000, 0x9001003f), + DEFINE_RES_MEM(0x90010000, 0x40), DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"), DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"), }; diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 1621ad07d284..33339745d432 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1667,8 +1667,10 @@ void __init u300_init_irq(void) for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); + vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START, + mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START, + mask[1], mask[1]); } diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index a38f80238ea9..cb04bd6ab3e7 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 2500000, .max_uV = 2500000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = { .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .boot_on = 1, }, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ee78a26707eb..ec09c1e07b1a 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,101 +12,101 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 0 -#define IRQ_U300_INTCON1_START 32 +#define IRQ_U300_INTCON0_START 1 +#define IRQ_U300_INTCON1_START 33 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 0 -#define IRQ_U300_IRQ1_EXT 1 -#define IRQ_U300_DMA 2 -#define IRQ_U300_VIDEO_ENC_0 3 -#define IRQ_U300_VIDEO_ENC_1 4 -#define IRQ_U300_AAIF_RX 5 -#define IRQ_U300_AAIF_TX 6 -#define IRQ_U300_AAIF_VGPIO 7 -#define IRQ_U300_AAIF_WAKEUP 8 -#define IRQ_U300_PCM_I2S0_FRAME 9 -#define IRQ_U300_PCM_I2S0_FIFO 10 -#define IRQ_U300_PCM_I2S1_FRAME 11 -#define IRQ_U300_PCM_I2S1_FIFO 12 -#define IRQ_U300_XGAM_GAMCON 13 -#define IRQ_U300_XGAM_CDI 14 -#define IRQ_U300_XGAM_CDICON 15 +#define IRQ_U300_IRQ0_EXT 1 +#define IRQ_U300_IRQ1_EXT 2 +#define IRQ_U300_DMA 3 +#define IRQ_U300_VIDEO_ENC_0 4 +#define IRQ_U300_VIDEO_ENC_1 5 +#define IRQ_U300_AAIF_RX 6 +#define IRQ_U300_AAIF_TX 7 +#define IRQ_U300_AAIF_VGPIO 8 +#define IRQ_U300_AAIF_WAKEUP 9 +#define IRQ_U300_PCM_I2S0_FRAME 10 +#define IRQ_U300_PCM_I2S0_FIFO 11 +#define IRQ_U300_PCM_I2S1_FRAME 12 +#define IRQ_U300_PCM_I2S1_FIFO 13 +#define IRQ_U300_XGAM_GAMCON 14 +#define IRQ_U300_XGAM_CDI 15 +#define IRQ_U300_XGAM_CDICON 16 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) /* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 16 +#define IRQ_U300_XGAM_MMIACC 17 #endif -#define IRQ_U300_XGAM_PDI 17 -#define IRQ_U300_XGAM_PDICON 18 -#define IRQ_U300_XGAM_GAMEACC 19 -#define IRQ_U300_XGAM_MCIDCT 20 -#define IRQ_U300_APEX 21 -#define IRQ_U300_UART0 22 -#define IRQ_U300_SPI 23 -#define IRQ_U300_TIMER_APP_OS 24 -#define IRQ_U300_TIMER_APP_DD 25 -#define IRQ_U300_TIMER_APP_GP1 26 -#define IRQ_U300_TIMER_APP_GP2 27 -#define IRQ_U300_TIMER_OS 28 -#define IRQ_U300_TIMER_MS 29 -#define IRQ_U300_KEYPAD_KEYBF 30 -#define IRQ_U300_KEYPAD_KEYBR 31 +#define IRQ_U300_XGAM_PDI 18 +#define IRQ_U300_XGAM_PDICON 19 +#define IRQ_U300_XGAM_GAMEACC 20 +#define IRQ_U300_XGAM_MCIDCT 21 +#define IRQ_U300_APEX 22 +#define IRQ_U300_UART0 23 +#define IRQ_U300_SPI 24 +#define IRQ_U300_TIMER_APP_OS 25 +#define IRQ_U300_TIMER_APP_DD 26 +#define IRQ_U300_TIMER_APP_GP1 27 +#define IRQ_U300_TIMER_APP_GP2 28 +#define IRQ_U300_TIMER_OS 29 +#define IRQ_U300_TIMER_MS 30 +#define IRQ_U300_KEYPAD_KEYBF 31 +#define IRQ_U300_KEYPAD_KEYBR 32 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 32 -#define IRQ_U300_GPIO_PORT1 33 -#define IRQ_U300_GPIO_PORT2 34 +#define IRQ_U300_GPIO_PORT0 33 +#define IRQ_U300_GPIO_PORT1 34 +#define IRQ_U300_GPIO_PORT2 35 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 35 -#define IRQ_U300_EVHIST 36 -#define IRQ_U300_MSPRO 37 -#define IRQ_U300_MMCSD_MCIINTR0 38 -#define IRQ_U300_MMCSD_MCIINTR1 39 -#define IRQ_U300_I2C0 40 -#define IRQ_U300_I2C1 41 -#define IRQ_U300_RTC 42 -#define IRQ_U300_NFIF 43 -#define IRQ_U300_NFIF2 44 +#define IRQ_U300_WDOG 36 +#define IRQ_U300_EVHIST 37 +#define IRQ_U300_MSPRO 38 +#define IRQ_U300_MMCSD_MCIINTR0 39 +#define IRQ_U300_MMCSD_MCIINTR1 40 +#define IRQ_U300_I2C0 41 +#define IRQ_U300_I2C1 42 +#define IRQ_U300_RTC 43 +#define IRQ_U300_NFIF 44 +#define IRQ_U300_NFIF2 45 #endif /* DB3150 and DB3200 have only 45 IRQs */ #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 45 +#define U300_VIC_IRQS_END 46 #endif /* The DB3350-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS335 -#define IRQ_U300_ISP_F0 45 -#define IRQ_U300_ISP_F1 46 -#define IRQ_U300_ISP_F2 47 -#define IRQ_U300_ISP_F3 48 -#define IRQ_U300_ISP_F4 49 -#define IRQ_U300_GPIO_PORT3 50 -#define IRQ_U300_SYSCON_PLL_LOCK 51 -#define IRQ_U300_UART1 52 -#define IRQ_U300_GPIO_PORT4 53 -#define IRQ_U300_GPIO_PORT5 54 -#define IRQ_U300_GPIO_PORT6 55 -#define U300_VIC_IRQS_END 56 +#define IRQ_U300_ISP_F0 46 +#define IRQ_U300_ISP_F1 47 +#define IRQ_U300_ISP_F2 48 +#define IRQ_U300_ISP_F3 49 +#define IRQ_U300_ISP_F4 50 +#define IRQ_U300_GPIO_PORT3 51 +#define IRQ_U300_SYSCON_PLL_LOCK 52 +#define IRQ_U300_UART1 53 +#define IRQ_U300_GPIO_PORT4 54 +#define IRQ_U300_GPIO_PORT5 55 +#define IRQ_U300_GPIO_PORT6 56 +#define U300_VIC_IRQS_END 57 #endif /* The DB3210-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 35 -#define IRQ_U300_GPIO_PORT4 36 -#define IRQ_U300_WDOG 37 -#define IRQ_U300_EVHIST 38 -#define IRQ_U300_MSPRO 39 -#define IRQ_U300_MMCSD_MCIINTR0 40 -#define IRQ_U300_MMCSD_MCIINTR1 41 -#define IRQ_U300_I2C0 42 -#define IRQ_U300_I2C1 43 -#define IRQ_U300_RTC 44 -#define IRQ_U300_NFIF 45 -#define IRQ_U300_NFIF2 46 -#define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_VIC_IRQS_END 48 +#define IRQ_U300_GPIO_PORT3 36 +#define IRQ_U300_GPIO_PORT4 37 +#define IRQ_U300_WDOG 38 +#define IRQ_U300_EVHIST 39 +#define IRQ_U300_MSPRO 40 +#define IRQ_U300_MMCSD_MCIINTR0 41 +#define IRQ_U300_MMCSD_MCIINTR1 42 +#define IRQ_U300_I2C0 43 +#define IRQ_U300_I2C1 44 +#define IRQ_U300_RTC 45 +#define IRQ_U300_NFIF 46 +#define IRQ_U300_NFIF2 47 +#define IRQ_U300_SYSCON_PLL_LOCK 48 +#define U300_VIC_IRQS_END 49 #endif /* Maximum 8*7 GPIO lines */ @@ -117,6 +117,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END) +#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 880d02ec89d4..ef7099eea0f2 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -17,6 +17,7 @@ config UX500_SOC_DB5500 config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU + select REGULATOR select REGULATOR_DB8500_PRCMU select CPU_FREQ_TABLE if CPU_FREQ diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c index 2b2d51caf9d8..0127490218cd 100644 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ b/arch/arm/mach-ux500/mbox-db5500.c @@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev, return sprintf(buf, "0x%X\n", mbox_value); } -static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); +static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo); static int mbox_show(struct seq_file *s, void *data) { diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index d2058ef8345f..eff5842f6232 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu_logical_map(cpu)); - gic_raise_softirq(cpumask_of(cpu), 1); + smp_send_reschedule(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7edef9121632..7c8a7d8467bf 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR bool "Select the High exception vector" help Say Y here to select high exception vector(0xFFFF0000~). - The exception vector can be vary depending on the platform + The exception vector can vary depending on the platform design in nommu mode. If your platform needs to select high exception vector, say Y. Otherwise or if you are unsure, say N, and the low exception diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index ff1f7cc11f87..80741992a9fc 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -26,18 +26,23 @@ ENTRY(v6_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* - * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103). - * The test below covers all the write situations, including Java bytecodes + * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR. */ - bic r1, r1, #1 << 11 @ clear bit 11 of FSR +#ifdef CONFIG_ARM_ERRATA_326103 + ldr ip, =0x4107b36 + mrc p15, 0, r3, c0, c0, 0 @ get processor id + teq ip, r3, lsr #4 @ r0 ARM1136? + bne do_DataAbort tst r5, #PSR_J_BIT @ Java? + tsteq r5, #PSR_T_BIT @ Thumb? bne do_DataAbort - do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 - ldreq r3, [r4] @ read aborted ARM instruction + bic r1, r1, #1 << 11 @ clear bit 11 of FSR + ldr r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 - reveq r3, r3 + rev r3, r3 #endif do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. +#endif b do_DataAbort diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index a53fd2aaa2f4..2a8e380501e8 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -32,6 +32,7 @@ static void __iomem *l2x0_base; static DEFINE_RAW_SPINLOCK(l2x0_lock); static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; +static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; struct l2x0_regs l2x0_saved_regs; @@ -61,12 +62,7 @@ static inline void cache_sync(void) { void __iomem *base = l2x0_base; -#ifdef CONFIG_PL310_ERRATA_753970 - /* write to an unmmapped register */ - writel_relaxed(0, base + L2X0_DUMMY_REG); -#else - writel_relaxed(0, base + L2X0_CACHE_SYNC); -#endif + writel_relaxed(0, base + sync_reg_offset); cache_wait(base + L2X0_CACHE_SYNC, 1); } @@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr) } #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + if (outer_cache.set_debug) + outer_cache.set_debug(val); +} -#define debug_writel(val) outer_cache.set_debug(val) - -static void l2x0_set_debug(unsigned long val) +static void pl310_set_debug(unsigned long val) { writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); } @@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val) { } -#define l2x0_set_debug NULL +#define pl310_set_debug NULL #endif #ifdef CONFIG_PL310_ERRATA_588369 @@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) else ways = 8; type = "L310"; +#ifdef CONFIG_PL310_ERRATA_753970 + /* Unmapped register. */ + sync_reg_offset = L2X0_DUMMY_REG; +#endif + outer_cache.set_debug = pl310_set_debug; break; case L2X0_CACHE_ID_PART_L210: ways = (aux >> 13) & 0xf; @@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) outer_cache.flush_all = l2x0_flush_all; outer_cache.inv_all = l2x0_inv_all; outer_cache.disable = l2x0_disable; - outer_cache.set_debug = l2x0_set_debug; printk(KERN_INFO "%s cache controller enabled\n", type); printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 9055b5a84ec5..f07467533365 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -320,7 +320,7 @@ retry: */ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); - if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) { if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 595079fa9d1d..8f5813bbffb5 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid); #endif #ifndef CONFIG_SPARSEMEM -static void arm_memory_present(void) +static void __init arm_memory_present(void) { } #else -static void arm_memory_present(void) +static void __init arm_memory_present(void) { struct memblock_region *reg; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b86f8933ff91..2c7cf2f9c837 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr, } } -static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, - unsigned long phys, const struct mem_type *type) +static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, + unsigned long end, unsigned long phys, const struct mem_type *type) { pud_t *pud = pud_offset(pgd, addr); unsigned long next; diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 6486d2f253cd..d51225f90ae2 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -13,6 +13,7 @@ #include <asm/sections.h> #include <asm/page.h> #include <asm/setup.h> +#include <asm/traps.h> #include <asm/mach/arch.h> #include "mm.h" @@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void) */ void __init paging_init(struct machine_desc *mdesc) { + early_trap_init((void *)CONFIG_VECTORS_BASE); bootmem_init(); } diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index f1c8486f7501..c2e2b66f72b5 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -255,6 +255,18 @@ __v7_setup: mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif +#ifndef CONFIG_ARM_THUMBEE + mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE + and r0, r0, #(0xf << 12) @ ThumbEE enabled field + teq r0, #(1 << 12) @ check if ThumbEE is present + bne 1f + mov r5, #0 + mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0 + mrc p14, 6, r0, c0, c0, 0 @ load TEECR + orr r0, r0, #1 @ set the 1st bit in order to + mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access +1: +#endif adr r5, v7_crval ldmia r5, {r5, r6} #ifdef CONFIG_CPU_ENDIAN_BE8 diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 8506cbb7fea4..62ec5c452792 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -398,32 +398,6 @@ struct clk dummy_ck = { .ops = &clkops_null, }; -#ifdef CONFIG_CPU_FREQ -void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_init_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_init_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} - -void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_exit_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_exit_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -#endif - /* * */ diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index ecdb3da0dea9..c58d896cd5c3 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -916,6 +916,13 @@ void omap_start_dma(int lch) l |= OMAP_DMA_CCR_BUFFERING_DISABLE; l |= OMAP_DMA_CCR_EN; + /* + * As dma_write() uses IO accessors which are weakly ordered, there + * is no guarantee that data in coherent DMA memory will be visible + * to the DMA device. Add a memory barrier here to ensure that any + * such data is visible prior to enabling DMA. + */ + mb(); p->dma_write(l, CCR, lch); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; @@ -965,6 +972,13 @@ void omap_stop_dma(int lch) p->dma_write(l, CCR, lch); } + /* + * Ensure that data transferred by DMA is visible to any access + * after DMA has been disabled. This is important for coherent + * DMA regions. + */ + mb(); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[dma_lch_count]; diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 240a7b9fd946..d0ef57c1d71b 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -272,8 +272,6 @@ struct clk { #endif }; -struct cpufreq_frequency_table; - struct clk_functions { int (*clk_enable)(struct clk *clk); void (*clk_disable)(struct clk *clk); @@ -283,10 +281,6 @@ struct clk_functions { void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); -#ifdef CONFIG_CPU_FREQ - void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); - void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); -#endif }; extern int mpurate; @@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void); extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); unsigned long omap_fixed_divisor_recalc(struct clk *clk); -#ifdef CONFIG_CPU_FREQ -extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#endif extern struct clk *omap_clk_get_by_name(const char *name); extern int omap_clk_enable_autoidle_all(void); extern int omap_clk_disable_autoidle_all(void); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 8070145ccb98..3f26db4ee8e6 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields { * @rev_offs: IP block revision register offset (from module base addr) * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) + * @srst_udelay: Delay needed after doing a softreset in usecs * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported * @clockact: the default value of the module CLOCKACTIVITY bits @@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig { u16 sysc_offs; u16 syss_offs; u16 sysc_flags; + struct omap_hwmod_sysc_fields *sysc_fields; + u8 srst_udelay; u8 idlemodes; u8 clockact; - struct omap_hwmod_sysc_fields *sysc_fields; }; /** diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index eec98afa0f83..f9a8c5341ee9 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, sdrc_actim_ctrl_b_1, sdrc_mr_1); } -#ifdef CONFIG_PM void omap3_sram_restore_context(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; @@ -358,17 +357,18 @@ void omap3_sram_restore_context(void) omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } -#endif /* CONFIG_PM */ - -#endif /* CONFIG_ARCH_OMAP3 */ static inline int omap34xx_sram_init(void) { -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) omap3_sram_restore_context(); -#endif return 0; } +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ static inline int am33xx_sram_init(void) { diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 71553f410016..a0ffc77da809 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -302,6 +302,7 @@ comment "Power management" config SAMSUNG_PM_DEBUG bool "S3C2410 PM Suspend debug" depends on PM + select DEBUG_LL help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 317e246ffc56..e834c5ef437c 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,6 +18,8 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include <plat/devs.h> + struct platform_device; struct mmc_host; struct mmc_card; @@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { } #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */ +static inline void s3c_sdhci_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S3C_DEV_HSMMC + case 0: + s3c_device_hsmmc0.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC1 + case 1: + s3c_device_hsmmc1.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC2 + case 2: + s3c_device_hsmmc2.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC3 + case 3: + s3c_device_hsmmc3.name = name; + break; +#endif + } +} + #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 858748eaa144..bc683b8219b5 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -17,6 +17,8 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/user.h> #include <asm/cp15.h> #include <asm/cputype.h> @@ -529,6 +531,103 @@ void vfp_flush_hwstate(struct thread_info *thread) } /* + * Save the current VFP state into the provided structures and prepare + * for entry into a new function (signal handler). + */ +int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + int err = 0; + + /* Ensure that the saved hwstate is up-to-date. */ + vfp_sync_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __put_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Copy the exception registers. + */ + __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err); + __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + if (err) + return -EFAULT; + + /* Ensure that VFP is disabled. */ + vfp_flush_hwstate(thread); + + /* + * As per the PCS, clear the length and stride bits for function + * entry. + */ + hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK); + + /* + * Disable VFP in the hwstate so that we can detect if it gets + * used. + */ + hwstate->fpexc &= ~FPEXC_EN; + return 0; +} + +/* Sanitise and restore the current VFP state from the provided structures. */ +int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + unsigned long fpexc; + int err = 0; + + /* + * If VFP has been used, then disable it to avoid corrupting + * the new thread state. + */ + if (hwstate->fpexc & FPEXC_EN) + vfp_flush_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __get_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Sanitise and restore the exception registers. + */ + __get_user_error(fpexc, &ufp_exc->fpexc, err); + + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + + /* Ensure FPINST2 is invalid and the exception flag is cleared. */ + fpexc &= ~(FPEXC_EX | FPEXC_FP2V); + hwstate->fpexc = fpexc; + + __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + return err ? -EFAULT : 0; +} + +/* * VFP hardware can lose all context when a CPU goes offline. * As we will be running in SMP mode with CPU hotplug, we will save the * hardware state at every thread switch. We clear our held state when |