diff options
Diffstat (limited to 'arch/arm64/boot')
120 files changed, 11124 insertions, 1754 deletions
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile index d8b923480f5a..b57fd2372ecd 100644 --- a/arch/arm64/boot/dts/actions/Makefile +++ b/arch/arm64/boot/dts/actions/Makefile @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ + dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts index ef79d7905f44..28f3f4a0f7f0 100644 --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts @@ -28,12 +28,6 @@ device_type = "memory"; reg = <0x1 0xe0000000 0x0 0x0>; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &timer { @@ -42,5 +36,4 @@ &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi index 66dd5309f0a2..192c7b39c8c1 100644 --- a/arch/arm64/boot/dts/actions/s700.dtsi +++ b/arch/arm64/boot/dts/actions/s700.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2017 Andreas Färber */ +#include <dt-bindings/clock/actions,s700-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -87,6 +88,12 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -107,6 +114,7 @@ uart0: serial@e0120000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -114,6 +122,7 @@ uart1: serial@e0122000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -121,6 +130,7 @@ uart2: serial@e0124000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -128,6 +138,7 @@ uart3: serial@e0126000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -135,6 +146,7 @@ uart4: serial@e0128000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -142,6 +154,7 @@ uart5: serial@e012a000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -149,10 +162,18 @@ uart6: serial@e012c000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + cmu: clock-controller@e0168000 { + compatible = "actions,s700-cmu"; + reg = <0x0 0xe0168000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + }; + sps: power-controller@e01b0100 { compatible = "actions,s700-sps"; reg = <0x0 0xe01b0100 0x0 0x100>; diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index 21ca80f9941c..732daaa6e9d3 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -24,11 +23,223 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; +}; + +&i2c0 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "Schematics Bubblegum96" + * version v1.0 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Boards naming of a line and the schematic name of + * the same line are in conflict, the 96Boards specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. Only exception is the I2C lines for which the schematic + * naming has been preferred. This is only for the informational + * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L" + * are the only ones actually used for GPIO. + */ + +&pinctrl { + gpio-line-names = + "GPIO-A", /* GPIO_0, LSEC pin 23 */ + "GPIO-B", /* GPIO_1, LSEC pin 24 */ + "GPIO-C", /* GPIO_2, LSEC pin 25 */ + "GPIO-D", /* GPIO_3, LSEC pin 26 */ + "GPIO-E", /* GPIO_4, LSEC pin 27 */ + "GPIO-F", /* GPIO_5, LSEC pin 28 */ + "GPIO-G", /* GPIO_6, LSEC pin 29 */ + "GPIO-H", /* GPIO_7, LSEC pin 30 */ + "GPIO-I", /* GPIO_8, LSEC pin 31 */ + "GPIO-J", /* GPIO_9, LSEC pin 32 */ + "NC", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "SIRQ2_1V8", /* GPIO_12 */ + "PCM0_OUT", /* GPIO_13 */ + "WIFI_LED", /* GPIO_14 */ + "PCM0_SYNC", /* GPIO_15 */ + "PCM0_CLK", /* GPIO_16 */ + "PCM0_IN", /* GPIO_17 */ + "BT_LED", /* GPIO_18 */ + "LED0", /* GPIO_19 */ + "LED1", /* GPIO_20 */ + "JTAG_TCK", /* GPIO_21 */ + "JTAG_TMS", /* GPIO_22 */ + "JTAG_TDI", /* GPIO_23 */ + "JTAG_TDO", /* GPIO_24 */ + "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */ + "NC", /* GPIO_26 */ + "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */ + "SD0_D0", /* GPIO_28 */ + "SD0_D1", /* GPIO_29 */ + "SD0_D2", /* GPIO_30 */ + "SD0_D3", /* GPIO_31 */ + "SD1_D0", /* GPIO_32 */ + "SD1_D1", /* GPIO_33 */ + "SD1_D2", /* GPIO_34 */ + "SD1_D3", /* GPIO_35 */ + "SD0_CMD", /* GPIO_36 */ + "SD0_CLK", /* GPIO_37 */ + "SD1_CMD", /* GPIO_38 */ + "SD1_CLK", /* GPIO_39 */ + "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */ + "SPI0_CS", /* GPIO_41, LSEC pin 12 */ + "SPI0_DIN", /* GPIO_42, LSEC pin 10 */ + "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */ + "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */ + "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */ + "UART0_RX", /* GPIO_46, LSEC pin 7 */ + "UART0_TX", /* GPIO_47, LSEC pin 5 */ + "UART0_RTSB", /* GPIO_48, LSEC pin 9 */ + "UART0_CTSB", /* GPIO_49, LSEC pin 3 */ + "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */ + "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */ + "I2C0_SCLK", /* GPIO_52 */ + "I2C0_SDATA", /* GPIO_53 */ + "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */ + "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */ + "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */ + "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */ + "CSI0_DN0", /* GPIO_58, HSEC pin 10 */ + "CSI0_DP0", /* GPIO_59, HSEC pin 8 */ + "CSI0_DN1", /* GPIO_60, HSEC pin 16 */ + "CSI0_DP1", /* GPIO_61, HSEC pin 14 */ + "CSI0_CN", /* GPIO_62, HSEC pin 4 */ + "CSI0_CP", /* GPIO_63, HSEC pin 2 */ + "CSI0_DN2", /* GPIO_64, HSEC pin 22 */ + "CSI0_DP2", /* GPIO_65, HSEC pin 20 */ + "CSI0_DN3", /* GPIO_66, HSEC pin 28 */ + "CSI0_DP3", /* GPIO_67, HSEC pin 26 */ + "[CLK0]", /* GPIO_68, HSEC pin 15 */ + "CSI1_DN0", /* GPIO_69, HSEC pin 44 */ + "CSI1_DP0", /* GPIO_70, HSEC pin 42 */ + "CSI1_DN1", /* GPIO_71, HSEC pin 50 */ + "CSI1_DP1", /* GPIO_72, HSEC pin 48 */ + "CSI1_CN", /* GPIO_73, HSEC pin 56 */ + "CSI1_CP", /* GPIO_74, HSEC pin 54 */ + "[CLK1]", /* GPIO_75, HSEC pin 17 */ + "[GPIOD0]", /* GPIO_76 */ + "[GPIOD1]", /* GPIO_77 */ + "BT_RST_N", /* GPIO_78 */ + "EXT_DC_EN", /* GPIO_79 */ + "[PCM_DI]", /* GPIO_80, LSEC pin 22 */ + "[PCM_DO]", /* GPIO_81, LSEC pin 20 */ + "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_83, LSEC pin 16 */ + "WAKE_BT", /* GPIO_84 */ + "WL_REG_ON", /* GPIO_85 */ + "NC", /* GPIO_86 */ + "NC", /* GPIO_87 */ + "NC", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "NC", /* GPIO_90 */ + "WIFI_WAKE", /* GPIO_91 */ + "BT_WAKE", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "OTG_EN2", /* GPIO_94 */ + "OTG_EN", /* GPIO_95 */ + "DSI_DP3", /* GPIO_96, HSEC pin 45 */ + "DSI_DN3", /* GPIO_97, HSEC pin 47 */ + "DSI_DP1", /* GPIO_98, HSEC pin 33 */ + "DSI_DN1", /* GPIO_99, HSEC pin 35 */ + "DSI_CP", /* GPIO_100, HSEC pin 21 */ + "DSI_CN", /* GPIO_101, HSEC pin 23 */ + "DSI_DP0", /* GPIO_102, HSEC pin 27 */ + "DSI_DN0", /* GPIO_103, HSEC pin 29 */ + "DSI_DP2", /* GPIO_104, HSEC pin 39 */ + "DSI_DN2", /* GPIO_105, HSEC pin 41 */ + "N0_D0", /* GPIO_106 */ + "N0_D1", /* GPIO_107 */ + "N0_D2", /* GPIO_108 */ + "N0_D3", /* GPIO_109 */ + "N0_D4", /* GPIO_110 */ + "N0_D5", /* GPIO_111 */ + "N0_D6", /* GPIO_112 */ + "N0_D7", /* GPIO_113 */ + "N0_DQS", /* GPIO_114 */ + "N0_DQSN", /* GPIO_115 */ + "NC", /* GPIO_116 */ + "NC", /* GPIO_117 */ + "NC", /* GPIO_118 */ + "N0_CEB1", /* GPIO_119 */ + "CARD_DT", /* GPIO_120 */ + "N0_CEB3", /* GPIO_121 */ + "SD_DAT0", /* GPIO_122, HSEC pin 1 */ + "SD_DAT1", /* GPIO_123, HSEC pin 3 */ + "SD_DAT2", /* GPIO_124, HSEC pin 5 */ + "SD_DAT3", /* GPIO_125, HSEC pin 7 */ + "NC", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */ + "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */ + "NC", /* GPIO_130 */ + "SD_CMD", /* GPIO_131 */ + "GPIO-L", /* GPIO_132, LSEC pin 34 */ + "GPIO-K", /* GPIO_133, LSEC pin 33 */ + "NC", /* GPIO_134 */ + "SD_SCLK", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "JTAG_TRST", /* GPIO_137 */ + "I2C3_SCLK", /* GPIO_138 */ + "LED2", /* GPIO_139 */ + "LED3", /* GPIO_140 */ + "I2C3_SDATA", /* GPIO_141 */ + "UART3_RX", /* GPIO_142 */ + "UART3_TX", /* GPIO_143 */ + "UART3_RTSB", /* GPIO_144 */ + "UART3_CTSB"; /* GPIO_145 */ + + i2c0_default: i2c0-default { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_default: i2c1-default { + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; - uart5_clk: uart5-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; + i2c2_default: i2c2-default { + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; }; }; @@ -38,5 +249,4 @@ &uart5 { status = "okay"; - clocks = <&uart5_clk>; }; diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi index 11406f6d3a6d..491ddccc9038 100644 --- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/clock/actions,s900-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -88,6 +88,18 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + diff24M: diff24M { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -108,6 +120,7 @@ uart0: serial@e0120000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -115,6 +128,7 @@ uart1: serial@e0122000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -122,6 +136,7 @@ uart2: serial@e0124000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -129,6 +144,7 @@ uart3: serial@e0126000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -136,6 +152,7 @@ uart4: serial@e0128000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -143,6 +160,7 @@ uart5: serial@e012a000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -150,15 +168,111 @@ uart6: serial@e012c000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + sps: power-controller@e012e000 { + compatible = "actions,s900-sps"; + reg = <0x0 0xe012e000 0x0 0x2000>; + #power-domain-cells = <1>; + }; + + cmu: clock-controller@e0160000 { + compatible = "actions,s900-cmu"; + reg = <0x0 0xe0160000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + }; + + i2c0: i2c@e0170000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e0172000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0172000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e0174000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e0176000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0176000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e0178000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e017a000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe017a000 0 0x1000>; + clocks = <&cmu CLK_I2C5>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + }; + timer: timer@e0228000 { compatible = "actions,s900-timer"; reg = <0x0 0xe0228000 0x0 0x8000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "timer1"; }; + + dma: dma-controller@e0260000 { + compatible = "actions,s900-dma"; + reg = <0x0 0xe0260000 0x0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <12>; + dma-requests = <46>; + clocks = <&cmu CLK_DMAC>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 9ffa7a038791..8d4f97f279e0 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -4,10 +4,13 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb @@ -15,4 +18,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index eac4793c8502..6cb2b7f0c817 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -203,7 +203,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 094cfed13df9..ef1c90401bb2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -86,6 +97,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -103,6 +118,17 @@ status = "okay"; }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -151,7 +177,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; @@ -302,7 +328,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 98dbff19f5cc..31884dbc8838 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -51,12 +51,44 @@ compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "nanopi-a64:blue:status"; + gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -67,6 +99,26 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdc1>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + /* i2c1 connected with gpio headers like pine64, bananapi */ &i2c1 { pinctrl-names = "default"; @@ -78,6 +130,13 @@ bias-pull-up; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -88,6 +147,24 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8189etv: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -125,9 +202,9 @@ ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { @@ -201,7 +278,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 3f531393eaee..f7a4bccaa5d4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -51,6 +51,7 @@ compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -58,12 +59,74 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */ + status = "okay"; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; }; +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdc1>; + allwinner,tx-delay-ps = <600>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -92,6 +155,14 @@ }; }; +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -100,6 +171,7 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; @@ -142,10 +214,14 @@ /* DCDC3 is polyphased with DCDC2 */ +/* + * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal + * 1.35V that the PMIC can drive. + */ ®_dcdc5 { regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; regulator-name = "vcc-ddr3"; }; @@ -180,6 +256,11 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -220,6 +301,18 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { status = "okay"; + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 1221764f5719..b0c64f75792c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -1,5 +1,6 @@ /* * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -51,23 +52,127 @@ compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "orangepi:green:status"; + gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */ + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */ + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; }; &ehci1 { status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_gmac_3v3>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { status = "okay"; }; @@ -89,9 +194,8 @@ #include "axp803.dtsi" ®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-name = "afvcc-csi"; }; @@ -163,12 +267,23 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "cpvdd"; }; +®_eldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi"; +}; + ®_fldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -195,13 +310,61 @@ vcc-hdmi-supply = <®_dldo1>; }; +&spi0 { + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + status = "okay"; + }; +}; + +/* On debug connector */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; -&usbphy { +/* Bluetooth */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; +/* On Pi-2 connector, RTS/CTS optional */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Pi-2 connector, RTS/CTS optional */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts new file mode 100644 index 000000000000..72d6961dc312 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -0,0 +1,13 @@ +/* + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + * + * Copyright (c) 2018 ARM Ltd. + */ + +#include "sun50i-a64-sopine-baseboard.dts" + +/ { + model = "Pine64 LTS"; + compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", + "allwinner,sun50i-a64"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 1b9b92e541d2..c077b6c1f458 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -62,6 +62,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -82,6 +97,17 @@ }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -241,7 +267,7 @@ /* On Exp and Euler connectors */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 897e60cbe38d..77fac84797e9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -80,8 +80,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; @@ -104,7 +103,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_eldo1>; bus-width = <8>; @@ -143,7 +142,7 @@ &r_i2c { clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&r_i2c_pins_a>; + pinctrl-0 = <&r_i2c_pl89_pins>; status = "okay"; }; @@ -270,7 +269,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index c21f2331add6..53fcc9098df3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + reg_vcc1v8: vcc1v8 { compatible = "regulator-fixed"; regulator-name = "vcc1v8"; @@ -69,6 +80,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -86,6 +101,17 @@ status = "okay"; }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -140,7 +166,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 81f8e0098699..c455b24dd079 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -260,7 +260,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index d3daf90a8715..f3a66f888205 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -88,6 +88,7 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu1: cpu@1 { @@ -95,6 +96,7 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu2: cpu@2 { @@ -102,6 +104,7 @@ device_type = "cpu"; reg = <2>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu3: cpu@3 { @@ -109,7 +112,20 @@ device_type = "cpu"; reg = <3>; enable-method = "psci"; + next-level-cache = <&L2>; }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + de: display-engine { + compatible = "allwinner,sun50i-a64-display-engine"; + allwinner,pipelines = <&mixer0>, + <&mixer1>; + status = "disabled"; }; osc24M: osc24M_clk { @@ -194,6 +210,52 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + mixer0: mixer@100000 { + compatible = "allwinner,sun50i-a64-de2-mixer-0"; + reg = <0x100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@200000 { + compatible = "allwinner,sun50i-a64-de2-mixer-1"; + reg = <0x200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + + mixer1_out_tcon1: endpoint { + remote-endpoint = <&tcon1_in_mixer1>; + }; + }; + }; + }; }; syscon: syscon@1c00000 { @@ -228,6 +290,75 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun50i-a64-tcon-lcd", + "allwinner,sun8i-a83t-tcon-lcd"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun50i-a64-tcon-tv", + "allwinner,sun8i-a83t-tcon-tv"; + reg = <0x01c0d000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON1>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + reg = <0>; + + tcon1_in_mixer1: endpoint { + remote-endpoint = <&mixer1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + }; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; @@ -270,6 +401,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + compatible = "allwinner,sun50i-a64-sid"; + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; @@ -399,7 +535,7 @@ }; mmc2_pins: mmc2-pins { - pins = "PC1", "PC5", "PC6", "PC8", "PC9", + pins = "PC5", "PC6", "PC8", "PC9", "PC10","PC11", "PC12", "PC13", "PC14", "PC15", "PC16"; function = "mmc2"; @@ -407,6 +543,13 @@ bias-pull-up; }; + mmc2_ds_pin: mmc2-ds-pin { + pins = "PC1"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + pwm_pin: pwm_pin { pins = "PD22"; function = "pwm"; @@ -442,7 +585,7 @@ function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; }; @@ -686,6 +829,50 @@ status = "disabled"; }; + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun50i-a64-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon1: endpoint { + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun50i-a64-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu 7>; + clock-names = "bus", "mod", "pll-0"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; @@ -749,7 +936,7 @@ interrupt-controller; #interrupt-cells = <3>; - r_i2c_pins_a: i2c-a { + r_i2c_pl89_pins: r-i2c-pl89-pins { pins = "PL8", "PL9"; function = "s_i2c"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts new file mode 100644 index 000000000000..2e2b14c0ae75 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi> + +/ { + model = "Banana Pi BPI-M2-Plus v1.2 H5"; + compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts new file mode 100644 index 000000000000..77661006dfba --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-bananapi-m2-plus.dtsi> + +/ { + model = "Banana Pi BPI-M2-Plus H5"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 62d646baac3c..b41dc1aab67d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -92,6 +92,49 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + + soc { + mali: gpu@1e80000 { + compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; + reg = <0x01e80000 0x30000>; + /* + * While the datasheet lists an interrupt for the + * PMU, the actual silicon does not have the PMU + * block. Reads all return zero, and writes are + * ignored. + */ + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + }; }; &ccu { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts new file mode 100644 index 000000000000..0612c19cd994 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi One Plus"; + compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc25-dram"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index cfa5fffcf62b..040828d2e2c0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -92,6 +92,29 @@ #size-cells = <1>; ranges; + syscon: syscon@3000000 { + compatible = "allwinner,sun50i-h6-system-control", + "allwinner,sun50i-a64-system-control"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@28000 { + compatible = "mmio-sram"; + reg = <0x00028000 0x1e000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00028000 0x1e000>; + + de2_sram: sram-section@0 { + compatible = "allwinner,sun50i-h6-sram-c", + "allwinner,sun50i-a64-sram-c"; + reg = <0x0000 0x1e000>; + }; + }; + }; + ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 6edc4fa9fd42..53cf195c2ada 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -124,6 +124,8 @@ &i2c1 { status = "okay"; clock-frequency = <100000>; + i2c-sda-falling-time-ns = <890>; /* hcnt */ + i2c-sdl-falling-time-ns = <890>; /* lcnt */ adc@14 { compatible = "lltc,ltc2497"; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi index 125f4deb52fe..b664e7af74eb 100644 --- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi @@ -107,7 +107,7 @@ clock-names = "uartclk", "apb_pclk"; }; - spi0: ssp@e1020000 { + spi0: spi@e1020000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1020000 0 0x1000>; @@ -117,7 +117,7 @@ clock-names = "apb_pclk"; }; - spi1: ssp@e1030000 { + spi1: spi@e1030000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1030000 0 0x1000>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index a97c0e2d7bc6..c31f29d660de 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index d5c01427a5ca..d4961dc8356b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -60,6 +60,55 @@ serial1 = &uart_A; }; + linein: audio-codec@0 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + status = "okay"; + sound-name-prefix = "Linein"; + }; + + lineout: audio-codec@1 { + #sound-dai-cells = <0>; + compatible = "everest,es7154"; + VDD-supply = <&vcc_3v3>; + PVDD-supply = <&vcc_5v>; + status = "okay"; + sound-name-prefix = "Lineout"; + }; + + spdif_dit: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + dmics: audio-codec@3 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <7>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -68,15 +117,26 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vddao_3v3: regulator-vddao_3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; @@ -95,26 +155,15 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - usb_pwr: regulator-usb_pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; @@ -126,11 +175,6 @@ enable-active-high; }; - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; @@ -138,13 +182,6 @@ clock-names = "ext_clock"; }; - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - speaker-leds { compatible = "gpio-leds"; @@ -179,30 +216,129 @@ }; }; - linein: audio-codec@0 { - #sound-dai-cells = <0>; - compatible = "everest,es7241"; - VDDA-supply = <&vcc_3v3>; - VDDP-supply = <&vcc_3v3>; - VDDD-supply = <&vcc_3v3>; + sound { + compatible = "amlogic,axg-sound-card"; + model = "AXG-S400"; + audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&tdmin_lb>, <&tdmout_c>; + audio-widgets = "Line", "Lineout", + "Line", "Linein", + "Speaker", "Speaker1 Left", + "Speaker", "Speaker1 Right"; + audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "SPDIFOUT IN 2", "FRDDR_C OUT 3", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TDMIN_LB IN 5", "TDM_C Capture", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "Lineout", "Lineout AOUTL", + "Lineout", "Lineout AOUTR", + "Speaker1 Left", "SPK1 OUT_A", + "Speaker1 Left", "SPK1 OUT_B", + "Speaker1 Right", "SPK1 OUT_C", + "Speaker1 Right", "SPK1 OUT_D", + "Linein AINL", "Linein", + "Linein AINR", "Linein"; + assigned-clocks = <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <589824000>, + <270950400>, + <393216000>; status = "okay"; - sound-name-prefix = "Linein"; - }; - lineout: audio-codec@1 { - #sound-dai-cells = <0>; - compatible = "everest,es7154"; - VDD-supply = <&vcc_3v3>; - PVDD-supply = <&vcc_5v>; - status = "okay"; - sound-name-prefix = "Lineout"; + dai-link@0 { + sound-dai = <&frddr_a>; + }; + + dai-link@1 { + sound-dai = <&frddr_b>; + }; + + dai-link@2 { + sound-dai = <&frddr_c>; + }; + + dai-link@3 { + sound-dai = <&toddr_a>; + }; + + dai-link@4 { + sound-dai = <&toddr_b>; + }; + + dai-link@5 { + sound-dai = <&toddr_c>; + }; + + dai-link@6 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&lineout>; + }; + + codec@1 { + sound-dai = <&speaker_amp1>; + }; + + codec@2 { + sound-dai = <&linein>; + }; + + }; + + dai-link@7 { + sound-dai = <&spdifout>; + + codec { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link@8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; }; - spdif_dit: audio-codec@2 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ }; }; @@ -226,16 +362,16 @@ }; }; -&uart_A { +&frddr_a { status = "okay"; - pinctrl-0 = <&uart_a_pins>; - pinctrl-names = "default"; }; -&uart_AO { +&frddr_b { + status = "okay"; +}; + +&frddr_c { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; }; &ir { @@ -260,6 +396,7 @@ PVDD_B-supply = <&main_12v>; PVDD_C-supply = <&main_12v>; PVDD_D-supply = <&main_12v>; + sound-name-prefix = "SPK1"; }; }; @@ -277,30 +414,22 @@ }; }; +&pdm { + pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>, + <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pwm_ab { status = "okay"; pinctrl-0 = <&pwm_a_x20_pins>; pinctrl-names = "default"; }; -/* emmc storage */ -&sd_emmc_c { +&saradc { status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <180000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; + vref-supply = <&vddio_ao18>; }; /* wifi module */ @@ -330,7 +459,94 @@ }; }; -&saradc { +/* emmc storage */ +&sd_emmc_c { status = "okay"; - vref-supply = <&vddio_ao18>; + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <180000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_a20_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_a { + pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>, + <&tdma_din0_pins>, <&tdma_dout0_x15_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>, + <&tdmb_din3_pins>, <&mclk_b_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_c { + pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>, + <&tdmc_din1_pins>, <&tdmc_dout2_pins>, + <&mclk_c_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>; + pinctrl-names = "default"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index c518130e5ce7..df017dbd2e57 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -3,13 +3,14 @@ * Copyright (c) 2017 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-aoclkc.h> #include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/axg-clkc.h> -#include <dt-bindings/clock/axg-aoclkc.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-axg-gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-axg-reset.h> / { @@ -19,22 +20,53 @@ #address-cells = <2>; #size-cells = <2>; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + tdmif_a: audio-controller@0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; - /* 16 MiB reserved for Hardware ROM Firmware */ - hwrom_reserved: hwrom@0 { - reg = <0x0 0x0 0x0 0x1000000>; - no-map; - }; + tdmif_b: audio-controller@1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; + tdmif_c: audio-controller@2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + ao_alt_xtal: ao_alt_xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <32000000>; + clock-output-names = "ao_alt_xtal"; + #clock-cells = <0>; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; cpus { @@ -78,77 +110,27 @@ }; }; - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; }; - tdmif_a: audio-controller@0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller@1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller@2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom_reserved: hwrom@0 { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; - ao_alt_xtal: ao_alt_xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <32000000>; - clock-output-names = "ao_alt_xtal"; - #clock-cells = <0>; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; }; soc { @@ -157,310 +139,10 @@ #size-cells = <2>; ranges; - apb: apb@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; - - sd_emmc_b: sd@5000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@7000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - }; - - audio: bus@ff642000 { - compatible = "simple-bus"; - reg = <0x0 0xff642000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - compatible = "amlogic,axg-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - }; - - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-axg-reset"; - reg = <0x0 0x01004 0x0 0x9c>; - #reset-cells = <1>; - }; - - spicc0: spi@13000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x13000 0x0 0x3c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC0>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc1: spi@15000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x15000 0x0 0x3c>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC1>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - }; - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; + 0x0 0xff634540 0x0 0x8>; interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, @@ -470,54 +152,26 @@ status = "disabled"; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - - sysctrl: system-controller@0 { - compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,axg-clkc"; - #clock-cells = <1>; - }; - }; - }; - - mailbox: mailbox@ff63dc00 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; - reg = <0 0xff63dc00 0 0x400>; - interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; + pdm: audio-controller@ff632000 { + compatible = "amlogic,axg-pdm"; + reg = <0x0 0xff632000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; }; - periphs: periphs@ff634000 { + periphs: bus@ff634000 { compatible = "simple-bus"; reg = <0x0 0xff634000 0x0 0x2000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - hwrng: rng { + hwrng: rng@18 { compatible = "amlogic,meson-rng"; reg = <0x0 0x18 0x0 0x4>; clocks = <&clkc CLKID_RNG0>; @@ -532,28 +186,92 @@ gpio: bank@480 { reg = <0x0 0x00480 0x0 0x40>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00520 0x0 0x14>, - <0x0 0x00430 0x0 0x3c>; + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, + <0x0 0x00430 0x0 0x3c>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_periphs 0 0 86>; }; + i2c0_pins: i2c0 { + mux { + groups = "i2c0_sck", + "i2c0_sda"; + function = "i2c0"; + }; + }; + + i2c1_x_pins: i2c1_x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + }; + }; + + i2c1_z_pins: i2c1_z { + mux { + groups = "i2c1_sck_z", + "i2c1_sda_z"; + function = "i2c1"; + }; + }; + + i2c2_a_pins: i2c2_a { + mux { + groups = "i2c2_sck_a", + "i2c2_sda_a"; + function = "i2c2"; + }; + }; + + i2c2_x_pins: i2c2_x { + mux { + groups = "i2c2_sck_x", + "i2c2_sda_x"; + function = "i2c2"; + }; + }; + + i2c3_a6_pins: i2c3_a6 { + mux { + groups = "i2c3_sda_a6", + "i2c3_sck_a7"; + function = "i2c3"; + }; + }; + + i2c3_a12_pins: i2c3_a12 { + mux { + groups = "i2c3_sda_a12", + "i2c3_sck_a13"; + function = "i2c3"; + }; + }; + + i2c3_a19_pins: i2c3_a19 { + mux { + groups = "i2c3_sda_a19", + "i2c3_sck_a20"; + function = "i2c3"; + }; + }; + emmc_pins: emmc { mux { groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_clk", - "emmc_cmd", - "emmc_ds"; + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd", + "emmc_ds"; function = "emmc"; }; }; @@ -569,40 +287,57 @@ }; }; - sdio_pins: sdio { + eth_rgmii_x_pins: eth-x-rgmii { mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd", - "sdio_clk"; - function = "sdio"; + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; }; }; - sdio_clk_gate_pins: sdio_clk_gate { + eth_rgmii_y_pins: eth-y-rgmii { mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; - bias-pull-down; + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; }; }; eth_rmii_x_pins: eth-x-rmii { mux { groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x"; + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x"; function = "eth"; }; }; @@ -610,55 +345,29 @@ eth_rmii_y_pins: eth-y-rmii { mux { groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y"; + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y"; function = "eth"; }; }; - eth_rgmii_x_pins: eth-x-rgmii { + mclk_b_pins: mclk_b { mux { - groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; + groups = "mclk_b"; + function = "mclk_b"; }; }; - eth_rgmii_y_pins: eth-y-rgmii { + mclk_c_pins: mclk_c { mux { - groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; + groups = "mclk_c"; + function = "mclk_c"; }; }; @@ -788,6 +497,29 @@ }; }; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + spdif_in_z_pins: spdif_in_z { mux { groups = "spdif_in_z"; @@ -823,13 +555,6 @@ }; }; - spdif_out_z_pins: spdif_out_z { - mux { - groups = "spdif_out_z"; - function = "spdif_out"; - }; - }; - spdif_out_a1_pins: spdif_out_a1 { mux { groups = "spdif_out_a1"; @@ -858,11 +583,18 @@ }; }; + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + spi0_pins: spi0 { mux { groups = "spi0_miso", - "spi0_mosi", - "spi0_clk"; + "spi0_mosi", + "spi0_clk"; function = "spi0"; }; }; @@ -888,12 +620,11 @@ }; }; - spi1_a_pins: spi1_a { mux { groups = "spi1_miso_a", - "spi1_mosi_a", - "spi1_clk_a"; + "spi1_mosi_a", + "spi1_clk_a"; function = "spi1"; }; }; @@ -915,8 +646,8 @@ spi1_x_pins: spi1_x { mux { groups = "spi1_miso_x", - "spi1_mosi_x", - "spi1_clk_x"; + "spi1_mosi_x", + "spi1_clk_x"; function = "spi1"; }; }; @@ -928,145 +659,52 @@ }; }; - i2c0_pins: i2c0 { - mux { - groups = "i2c0_sck", - "i2c0_sda"; - function = "i2c0"; - }; - }; - - i2c1_z_pins: i2c1_z { - mux { - groups = "i2c1_sck_z", - "i2c1_sda_z"; - function = "i2c1"; - }; - }; - - i2c1_x_pins: i2c1_x { - mux { - groups = "i2c1_sck_x", - "i2c1_sda_x"; - function = "i2c1"; - }; - }; - - i2c2_x_pins: i2c2_x { - mux { - groups = "i2c2_sck_x", - "i2c2_sda_x"; - function = "i2c2"; - }; - }; - - i2c2_a_pins: i2c2_a { - mux { - groups = "i2c2_sck_a", - "i2c2_sda_a"; - function = "i2c2"; - }; - }; - - i2c3_a6_pins: i2c3_a6 { - mux { - groups = "i2c3_sda_a6", - "i2c3_sck_a7"; - function = "i2c3"; - }; - }; - - i2c3_a12_pins: i2c3_a12 { - mux { - groups = "i2c3_sda_a12", - "i2c3_sck_a13"; - function = "i2c3"; - }; - }; - - i2c3_a19_pins: i2c3_a19 { - mux { - groups = "i2c3_sda_a19", - "i2c3_sck_a20"; - function = "i2c3"; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - }; - }; - - uart_a_cts_rts_pins: uart_a_cts_rts { - mux { - groups = "uart_cts_a", - "uart_rts_a"; - function = "uart_a"; - }; - }; - - uart_b_x_pins: uart_b_x { - mux { - groups = "uart_tx_b_x", - "uart_rx_b_x"; - function = "uart_b"; - }; - }; - - uart_b_x_cts_rts_pins: uart_b_x_cts_rts { + tdma_din0_pins: tdma_din0 { mux { - groups = "uart_cts_b_x", - "uart_rts_b_x"; - function = "uart_b"; + groups = "tdma_din0"; + function = "tdma"; }; }; - uart_b_z_pins: uart_b_z { + tdma_dout0_x14_pins: tdma_dout0_x14 { mux { - groups = "uart_tx_b_z", - "uart_rx_b_z"; - function = "uart_b"; + groups = "tdma_dout0_x14"; + function = "tdma"; }; }; - uart_b_z_cts_rts_pins: uart_b_z_cts_rts { + tdma_dout0_x15_pins: tdma_dout0_x15 { mux { - groups = "uart_cts_b_z", - "uart_rts_b_z"; - function = "uart_b"; + groups = "tdma_dout0_x15"; + function = "tdma"; }; }; - uart_ao_b_z_pins: uart_ao_b_z { + tdma_dout1_pins: tdma_dout1 { mux { - groups = "uart_ao_tx_b_z", - "uart_ao_rx_b_z"; - function = "uart_ao_b_z"; + groups = "tdma_dout1"; + function = "tdma"; }; }; - uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + tdma_din1_pins: tdma_din1 { mux { - groups = "uart_ao_cts_b_z", - "uart_ao_rts_b_z"; - function = "uart_ao_b_z"; + groups = "tdma_din1"; + function = "tdma"; }; }; - mclk_b_pins: mclk_b { + tdma_fs_pins: tdma_fs { mux { - groups = "mclk_b"; - function = "mclk_b"; + groups = "tdma_fs"; + function = "tdma"; }; }; - mclk_c_pins: mclk_c { + tdma_fs_slv_pins: tdma_fs_slv { mux { - groups = "mclk_c"; - function = "mclk_c"; + groups = "tdma_fs_slv"; + function = "tdma"; }; }; @@ -1084,65 +722,58 @@ }; }; - tdma_fs_pins: tdma_fs { - mux { - groups = "tdma_fs"; - function = "tdma"; - }; - }; - - tdma_fs_slv_pins: tdma_fs_slv { + tdmb_din0_pins: tdmb_din0 { mux { - groups = "tdma_fs_slv"; - function = "tdma"; + groups = "tdmb_din0"; + function = "tdmb"; }; }; - tdma_din0_pins: tdma_din0 { + tdmb_din1_pins: tdmb_din1 { mux { - groups = "tdma_din0"; - function = "tdma"; + groups = "tdmb_din1"; + function = "tdmb"; }; }; - tdma_dout0_x14_pins: tdma_dout0_x14 { + tdmb_din2_pins: tdmb_din2 { mux { - groups = "tdma_dout0_x14"; - function = "tdma"; + groups = "tdmb_din2"; + function = "tdmb"; }; }; - tdma_dout0_x15_pins: tdma_dout0_x15 { + tdmb_din3_pins: tdmb_din3 { mux { - groups = "tdma_dout0_x15"; - function = "tdma"; + groups = "tdmb_din3"; + function = "tdmb"; }; }; - tdma_dout1_pins: tdma_dout1 { + tdmb_dout0_pins: tdmb_dout0 { mux { - groups = "tdma_dout1"; - function = "tdma"; + groups = "tdmb_dout0"; + function = "tdmb"; }; }; - tdma_din1_pins: tdma_din1 { + tdmb_dout1_pins: tdmb_dout1 { mux { - groups = "tdma_din1"; - function = "tdma"; + groups = "tdmb_dout1"; + function = "tdmb"; }; }; - tdmb_sclk_pins: tdmb_sclk { + tdmb_dout2_pins: tdmb_dout2 { mux { - groups = "tdmb_sclk"; + groups = "tdmb_dout2"; function = "tdmb"; }; }; - tdmb_sclk_slv_pins: tdmb_sclk_slv { + tdmb_dout3_pins: tdmb_dout3 { mux { - groups = "tdmb_sclk_slv"; + groups = "tdmb_dout3"; function = "tdmb"; }; }; @@ -1161,163 +792,412 @@ }; }; - tdmb_din0_pins: tdmb_din0 { + tdmb_sclk_pins: tdmb_sclk { mux { - groups = "tdmb_din0"; + groups = "tdmb_sclk"; function = "tdmb"; }; }; - tdmb_dout0_pins: tdmb_dout0 { + tdmb_sclk_slv_pins: tdmb_sclk_slv { mux { - groups = "tdmb_dout0"; + groups = "tdmb_sclk_slv"; function = "tdmb"; }; }; - tdmb_din1_pins: tdmb_din1 { + tdmc_fs_pins: tdmc_fs { mux { - groups = "tdmb_din1"; - function = "tdmb"; + groups = "tdmc_fs"; + function = "tdmc"; }; }; - tdmb_dout1_pins: tdmb_dout1 { + tdmc_fs_slv_pins: tdmc_fs_slv { mux { - groups = "tdmb_dout1"; - function = "tdmb"; + groups = "tdmc_fs_slv"; + function = "tdmc"; }; }; - tdmb_din2_pins: tdmb_din2 { + tdmc_sclk_pins: tdmc_sclk { mux { - groups = "tdmb_din2"; - function = "tdmb"; + groups = "tdmc_sclk"; + function = "tdmc"; }; }; - tdmb_dout2_pins: tdmb_dout2 { + tdmc_sclk_slv_pins: tdmc_sclk_slv { mux { - groups = "tdmb_dout2"; - function = "tdmb"; + groups = "tdmc_sclk_slv"; + function = "tdmc"; }; }; - tdmb_din3_pins: tdmb_din3 { + tdmc_din0_pins: tdmc_din0 { mux { - groups = "tdmb_din3"; - function = "tdmb"; + groups = "tdmc_din0"; + function = "tdmc"; }; }; - tdmb_dout3_pins: tdmb_dout3 { + tdmc_din1_pins: tdmc_din1 { mux { - groups = "tdmb_dout3"; - function = "tdmb"; + groups = "tdmc_din1"; + function = "tdmc"; }; }; - tdmc_sclk_pins: tdmc_sclk { + tdmc_din2_pins: tdmc_din2 { mux { - groups = "tdmc_sclk"; + groups = "tdmc_din2"; function = "tdmc"; }; }; - tdmc_sclk_slv_pins: tdmc_sclk_slv { + tdmc_din3_pins: tdmc_din3 { mux { - groups = "tdmc_sclk_slv"; + groups = "tdmc_din3"; function = "tdmc"; }; }; - tdmc_fs_pins: tdmc_fs { + tdmc_dout0_pins: tdmc_dout0 { mux { - groups = "tdmc_fs"; + groups = "tdmc_dout0"; function = "tdmc"; }; }; - tdmc_fs_slv_pins: tdmc_fs_slv { + tdmc_dout1_pins: tdmc_dout1 { mux { - groups = "tdmc_fs_slv"; + groups = "tdmc_dout1"; function = "tdmc"; }; }; - tdmc_din0_pins: tdmc_din0 { + tdmc_dout2_pins: tdmc_dout2 { mux { - groups = "tdmc_din0"; + groups = "tdmc_dout2"; function = "tdmc"; }; }; - tdmc_dout0_pins: tdmc_dout0 { + tdmc_dout3_pins: tdmc_dout3 { mux { - groups = "tdmc_dout0"; + groups = "tdmc_dout3"; function = "tdmc"; }; }; - tdmc_din1_pins: tdmc_din1 { + uart_a_pins: uart_a { mux { - groups = "tdmc_din1"; - function = "tdmc"; + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; }; }; - tdmc_dout1_pins: tdmc_dout1 { + uart_a_cts_rts_pins: uart_a_cts_rts { mux { - groups = "tdmc_dout1"; - function = "tdmc"; + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; }; }; - tdmc_din2_pins: tdmc_din2 { + uart_b_x_pins: uart_b_x { mux { - groups = "tdmc_din2"; - function = "tdmc"; + groups = "uart_tx_b_x", + "uart_rx_b_x"; + function = "uart_b"; }; }; - tdmc_dout2_pins: tdmc_dout2 { + uart_b_x_cts_rts_pins: uart_b_x_cts_rts { mux { - groups = "tdmc_dout2"; - function = "tdmc"; + groups = "uart_cts_b_x", + "uart_rts_b_x"; + function = "uart_b"; }; }; - tdmc_din3_pins: tdmc_din3 { + uart_b_z_pins: uart_b_z { mux { - groups = "tdmc_din3"; - function = "tdmc"; + groups = "uart_tx_b_z", + "uart_rx_b_z"; + function = "uart_b"; }; }; - tdmc_dout3_pins: tdmc_dout3 { + uart_b_z_cts_rts_pins: uart_b_z_cts_rts { mux { - groups = "tdmc_dout3"; - function = "tdmc"; + groups = "uart_cts_b_z", + "uart_rts_b_z"; + function = "uart_b"; + }; + }; + + uart_ao_b_z_pins: uart_ao_b_z { + mux { + groups = "uart_ao_tx_b_z", + "uart_ao_rx_b_z"; + function = "uart_ao_b_z"; + }; + }; + + uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + mux { + groups = "uart_ao_cts_b_z", + "uart_ao_rts_b_z"; + function = "uart_ao_b_z"; }; }; }; }; - sram: sram@fffc0000 { - compatible = "amlogic,meson-axg-sram", "mmio-sram"; - reg = <0x0 0xfffc0000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xfffc0000 0x20000>; + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13000 0x400>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-axg-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + }; }; + }; - cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13400 0x400>; + mailbox: mailbox@ff63dc00 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0xff63dc00 0 0x400>; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + + audio: bus@ff642000 { + compatible = "simple-bus"; + reg = <0x0 0xff642000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; }; }; @@ -1329,7 +1209,7 @@ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { @@ -1347,8 +1227,8 @@ gpio_ao: bank@14 { reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -1407,7 +1287,7 @@ uart_ao_a_pins: uart_ao_a { mux { groups = "uart_ao_tx_a", - "uart_ao_rx_a"; + "uart_ao_rx_a"; function = "uart_ao_a"; }; }; @@ -1415,7 +1295,7 @@ uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { mux { groups = "uart_ao_cts_a", - "uart_ao_rts_a"; + "uart_ao_rts_a"; function = "uart_ao_a"; }; }; @@ -1423,7 +1303,7 @@ uart_ao_b_pins: uart_ao_b { mux { groups = "uart_ao_tx_b", - "uart_ao_rx_b"; + "uart_ao_rx_b"; function = "uart_ao_b"; }; }; @@ -1431,7 +1311,7 @@ uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { mux { groups = "uart_ao_cts_b", - "uart_ao_rts_b"; + "uart_ao_rts_b"; function = "uart_ao_b"; }; }; @@ -1443,13 +1323,6 @@ amlogic,has-chip-id; }; - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-axg-ao-pwm"; - reg = <0x0 0x07000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - pwm_AO_cd: pwm@2000 { compatible = "amlogic,meson-axg-ao-pwm"; reg = <0x0 0x02000 0x0 0x20>; @@ -1457,16 +1330,6 @@ status = "disabled"; }; - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; @@ -1485,6 +1348,23 @@ status = "disabled"; }; + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-axg-ao-pwm"; + reg = <0x0 0x07000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + ir: ir@8000 { compatible = "amlogic,meson-gxbb-ir"; reg = <0x0 0x8000 0x0 0x20>; @@ -1499,12 +1379,211 @@ #io-channel-cells = <1>; interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; clock-names = "clkin", "core", "adc_clk", "adc_sel"; status = "disabled"; }; }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x01004 0x0 0x9c>; + #reset-cells = <1>; + }; + + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + spicc0: spi@13000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x13000 0x0 0x3c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC0>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@15000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x15000 0x0 0x3c>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC1>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + }; + + apb: bus@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + + sd_emmc_b: sd@5000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x5000 0x0 0x800>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@7000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x7000 0x0 0x800>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; + + sram: sram@fffc0000 { + compatible = "amlogic,meson-axg-sram", "mmio-sram"; + reg = <0x0 0xfffc0000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfffc0000 0x20000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13400 0x400>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts new file mode 100644 index 000000000000..c44dbdddf2cf --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amlogic,u200", "amlogic,g12a"; + model = "Amlogic Meson G12A U200 Development Board"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi new file mode 100644 index 000000000000..3b82a975c663 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "amlogic,g12a"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + periphs: periphs@ff634000 { + compatible = "simple-bus"; + reg = <0x0 0xff634000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; + }; + + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + }; + + apb: apb@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index b8dc4dbb391b..f1e5cdbade5e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -44,7 +44,7 @@ linux,cma { compatible = "shared-dma-pool"; reusable; - size = <0x0 0xbc00000>; + size = <0x0 0x10000000>; alignment = <0x0 0x400000>; linux,cma-default; }; @@ -344,7 +344,7 @@ ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; pwrc_vpu: power-controller-vpu { @@ -423,6 +423,19 @@ }; }; + dmcbus: bus@c8838000 { + compatible = "simple-bus"; + reg = <0x0 0xc8838000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + hiubus: bus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; @@ -431,7 +444,7 @@ ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; reg = <0 0 0 0x400>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 98cbba6809ca..1ade7e486828 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -390,7 +390,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index f63bceb88caa..90a56af967a7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -13,7 +13,7 @@ / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Technology CC"; + model = "Libre Computer Board AML-S905X-CC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index c87a80e9bcc6..8f0bb3c44bd6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -337,7 +337,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index ce56a4acda4f..ed774ee8f659 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -115,22 +115,17 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etf0_in_port: endpoint { - slave-mode; remote-endpoint = <&main_funnel_out_port>; }; }; + }; - /* output port */ - port@1 { - reg = <0>; + out-ports { + port { etf0_out_port: endpoint { }; }; @@ -144,10 +139,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -160,31 +156,29 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { main_funnel_out_port: endpoint { remote-endpoint = <&etf0_in_port>; }; }; + }; - /* input ports */ - port@1 { + main_funnel_in_ports: in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; main_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster0_funnel_out_port>; }; }; - port@2 { + port@1 { reg = <1>; main_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster1_funnel_out_port>; }; }; @@ -199,10 +193,12 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + arm,scatter-gather; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -216,8 +212,10 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - stm_out_port: endpoint { + out-ports { + port { + stm_out_port: endpoint { + }; }; }; }; @@ -238,9 +236,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster0_etm0_out_port: endpoint { - remote-endpoint = <&cluster0_funnel_in_port0>; + out-ports { + port { + cluster0_etm0_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port0>; + }; }; }; }; @@ -252,29 +252,28 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster0_funnel_out_port: endpoint { remote-endpoint = <&main_funnel_in_port0>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster0_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster0_etm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; cluster0_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster0_etm1_out_port>; }; }; @@ -297,9 +296,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster0_etm1_out_port: endpoint { - remote-endpoint = <&cluster0_funnel_in_port1>; + out-ports { + port { + cluster0_etm1_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port1>; + }; }; }; }; @@ -320,9 +321,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm0_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port0>; + out-ports { + port { + cluster1_etm0_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port0>; + }; }; }; }; @@ -334,43 +337,40 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster1_funnel_out_port: endpoint { remote-endpoint = <&main_funnel_in_port1>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster1_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; cluster1_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; cluster1_funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm2_out_port>; }; }; - port@4 { + port@3 { reg = <3>; cluster1_funnel_in_port3: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm3_out_port>; }; }; @@ -393,9 +393,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm1_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port1>; + out-ports { + port { + cluster1_etm1_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port1>; + }; }; }; }; @@ -416,9 +418,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm2_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port2>; + out-ports { + port { + cluster1_etm2_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port2>; + }; }; }; }; @@ -439,9 +443,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm3_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port3>; + out-ports { + port { + cluster1_etm3_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port3>; + }; }; }; }; @@ -454,7 +460,7 @@ clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -472,12 +478,10 @@ remote-endpoint = <&etr_in_port>; }; }; - - /* replicator input port */ - port@2 { - reg = <0>; + }; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index 0c43fb3525eb..cf285152deab 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -7,23 +7,16 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { csys1_funnel_out_port: endpoint { remote-endpoint = <&etf1_in_port>; }; }; - - /* input port */ - port@1 { - reg = <0>; + }; + in-ports { + port { csys1_funnel_in_port0: endpoint { - slave-mode; }; }; @@ -37,22 +30,15 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etf1_in_port: endpoint { - slave-mode; remote-endpoint = <&csys1_funnel_out_port>; }; }; - - /* output port */ - port@1 { - reg = <0>; + }; + out-ports { + port { etf1_out_port: endpoint { remote-endpoint = <&csys2_funnel_in_port1>; }; @@ -67,20 +53,18 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { csys2_funnel_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; csys2_funnel_in_port0: endpoint { slave-mode; @@ -88,7 +72,7 @@ }; }; - port@2 { + port@1 { reg = <1>; csys2_funnel_in_port1: endpoint { slave-mode; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 1fb5c5a0f32e..08d4ba1716c3 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -257,14 +257,11 @@ remote-endpoint = <&main_funnel_in_port2>; }; -&main_funnel { - ports { - port@3 { - reg = <2>; - main_funnel_in_port2: endpoint { - slave-mode; - remote-endpoint = <&stm_out_port>; - }; +&main_funnel_in_ports { + port@2 { + reg = <2>; + main_funnel_in_port2: endpoint { + remote-endpoint = <&stm_out_port>; }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 1193a9e34bbb..667ca989c11b 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb + bcm2837-rpi-3-b-plus.dtb \ + bcm2837-rpi-cm3-io3.dtb subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts new file mode 100644 index 000000000000..b1c4ab212c64 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-cm3-io3.dts" diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 1a406a76c86a..ea854f689fda 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -639,7 +639,7 @@ status = "disabled"; }; - ssp0: ssp@66180000 { + ssp0: spi@66180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x66180000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; @@ -650,7 +650,7 @@ status = "disabled"; }; - ssp1: ssp@66190000 { + ssp1: spi@66190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x66190000 0x1000>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index bc299c3d9068..a9b92e52d50e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -138,7 +138,7 @@ &i2c1 { status = "okay"; - pcf8574: pcf8574@20 { + pcf8574: pcf8574@27 { compatible = "nxp,pcf8574a"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index e283480bfc7e..cfeaa855bd05 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -521,7 +521,7 @@ status = "disabled"; }; - ssp0: ssp@180000 { + ssp0: spi@180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00180000 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; @@ -533,7 +533,7 @@ status = "disabled"; }; - ssp1: ssp@190000 { + ssp1: spi@190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00190000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 68ac78c4564d..5da732f82fa0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -337,7 +337,7 @@ status = "disabled"; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index c7b8d2c009cd..dff3d648172e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -50,6 +51,7 @@ nor@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 7b01ba8d3b7e..17ca357e854f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -65,6 +66,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 7881e3d81a9a..3fed504b5381 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -280,11 +281,10 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; - big-endian; interrupts = <0 43 0x4>; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -382,7 +382,7 @@ ranges = <0x0 0x5 0x00000000 0x8000000>; }; - dspi0: dspi@2100000 { + dspi0: spi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -395,7 +395,7 @@ status = "disabled"; }; - dspi1: dspi@2110000 { + dspi1: spi@2110000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index e69306e6b0b1..e58a8ca1386c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Shaohui Xie <Shaohui.Xie@nxp.com> */ @@ -141,6 +142,7 @@ nor@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 440e111651d5..a59b48203688 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -57,12 +57,12 @@ reg = <0x4c>; }; - eeprom@56 { + eeprom@52 { compatible = "atmel,24c512"; reg = <0x52>; }; - eeprom@57 { + eeprom@53 { compatible = "atmel,24c512"; reg = <0x53>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index ef83786b8b90..51cbd50012d6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <mingkai.hu@nxp.com> */ @@ -198,11 +199,10 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; - big-endian; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -361,7 +361,7 @@ #thermal-sensor-cells = <1>; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 8cb78dd99672..e45607419692 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -22,6 +22,8 @@ crypto = &crypto; serial0 = &serial0; serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; }; cpu: cpus { @@ -221,6 +223,20 @@ interrupts = <0 32 0x4>; /* Level high type */ }; + serial2: serial@21d0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 33 0x4>; /* Level high type */ + }; + + serial3: serial@21d0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 33 0x4>; /* Level high type */ + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; @@ -469,7 +485,7 @@ mmu-masters = <&fsl_mc 0x300 0>; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { status = "disabled"; compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; #address-cells = <1>; @@ -595,7 +611,7 @@ 3 0 0x5 0x20000000 0x00010000>; }; - qspi: quadspi@20c0000 { + qspi: spi@20c0000 { status = "disabled"; compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index 03d93f8ef8a9..f4d68caeba83 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb +dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts new file mode 100644 index 000000000000..4f5118642024 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon HiKey970 Development Board + * + * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2018, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "hi3670.dtsi" + +/ { + model = "HiKey970"; + compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; + + aliases { + serial6 = &uart6; /* console UART */ + }; + + chosen { + stdout-path = "serial6:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* expect bootloader to fill in this region */ + reg = <0x0 0x0 0x0 0x0>; + }; +}; + +&uart6 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi new file mode 100644 index 000000000000..c90e6f6a34ec --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon Hi3670 SoC + * + * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2018, Linaro Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hi3670"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@e82b0000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ + <0x0 0xe82b2000 0 0x2000>, /* GICC */ + <0x0 0xe82b4000 0 0x2000>, /* GICH */ + <0x0 0xe82b6000 0 0x2000>; /* GICV */ + #interrupt-cells = <3>; + #address-cells = <0>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <1920000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart6_clk: clk_19_2M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + uart6: serial@fff32000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfff32000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart6_clk &uart6_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi index 7afee5d5087b..68c52f1149be 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi @@ -20,22 +20,18 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { soc_funnel_out: endpoint { remote-endpoint = <&etf_in>; }; }; + }; - port@1 { - reg = <0>; + in-ports { + port { soc_funnel_in: endpoint { - slave-mode; remote-endpoint = <&acpu_funnel_out>; }; @@ -49,21 +45,17 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&soc_funnel_out>; }; }; + }; - port@1 { - reg = <0>; + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; @@ -77,20 +69,20 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; + }; - port@1 { + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; replicator_out0: endpoint { remote-endpoint = @@ -98,7 +90,7 @@ }; }; - port@2 { + port@1 { reg = <1>; replicator_out1: endpoint { remote-endpoint = @@ -114,14 +106,9 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etr_in: endpoint { - slave-mode; remote-endpoint = <&replicator_out0>; }; @@ -135,14 +122,9 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { tpiu_in: endpoint { - slave-mode; remote-endpoint = <&replicator_out1>; }; @@ -156,85 +138,78 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { acpu_funnel_out: endpoint { remote-endpoint = <&soc_funnel_in>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; acpu_funnel_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; - port@2 { + port@1 { reg = <1>; acpu_funnel_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; - port@3 { + port@2 { reg = <2>; acpu_funnel_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; - port@4 { + port@3 { reg = <3>; acpu_funnel_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@5 { + port@4 { reg = <4>; acpu_funnel_in4: endpoint { - slave-mode; remote-endpoint = <&etm4_out>; }; }; - port@6 { + port@5 { reg = <5>; acpu_funnel_in5: endpoint { - slave-mode; remote-endpoint = <&etm5_out>; }; }; - port@7 { + port@6 { reg = <6>; acpu_funnel_in6: endpoint { - slave-mode; remote-endpoint = <&etm6_out>; }; }; - port@8 { + port@7 { reg = <7>; acpu_funnel_in7: endpoint { - slave-mode; remote-endpoint = <&etm7_out>; }; @@ -251,10 +226,12 @@ cpu = <&cpu0>; - port { - etm0_out: endpoint { - remote-endpoint = - <&acpu_funnel_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&acpu_funnel_in0>; + }; }; }; }; @@ -268,10 +245,12 @@ cpu = <&cpu1>; - port { - etm1_out: endpoint { - remote-endpoint = - <&acpu_funnel_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&acpu_funnel_in1>; + }; }; }; }; @@ -285,10 +264,12 @@ cpu = <&cpu2>; - port { - etm2_out: endpoint { - remote-endpoint = - <&acpu_funnel_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&acpu_funnel_in2>; + }; }; }; }; @@ -302,10 +283,12 @@ cpu = <&cpu3>; - port { - etm3_out: endpoint { - remote-endpoint = - <&acpu_funnel_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&acpu_funnel_in3>; + }; }; }; }; @@ -319,10 +302,12 @@ cpu = <&cpu4>; - port { - etm4_out: endpoint { - remote-endpoint = - <&acpu_funnel_in4>; + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&acpu_funnel_in4>; + }; }; }; }; @@ -336,10 +321,12 @@ cpu = <&cpu5>; - port { - etm5_out: endpoint { - remote-endpoint = - <&acpu_funnel_in5>; + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&acpu_funnel_in5>; + }; }; }; }; @@ -353,10 +340,12 @@ cpu = <&cpu6>; - port { - etm6_out: endpoint { - remote-endpoint = - <&acpu_funnel_in6>; + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&acpu_funnel_in6>; + }; }; }; }; @@ -370,10 +359,12 @@ cpu = <&cpu7>; - port { - etm7_out: endpoint { - remote-endpoint = - <&acpu_funnel_in7>; + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&acpu_funnel_in7>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 247024df714f..97d5bf2c6ec5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -99,6 +99,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -111,6 +112,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -123,6 +125,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -135,6 +138,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -147,6 +151,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -159,6 +164,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -171,6 +177,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index 860c8fb10795..4bde7b6f2b11 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 1887af654a7d..16ced1ff1ad3 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index ea9d49f2a911..eca8bac6303a 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index d9531e242eb4..f5eaec531aa8 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -80,6 +80,19 @@ /* 32M internal register @ 0xd000_0000 */ ranges = <0x0 0x0 0xd0000000 0x2000000>; + wdt: watchdog@8300 { + compatible = "marvell,armada-3700-wdt"; + reg = <0x8300 0x40>; + marvell,system-controller = <&cpu_misc>; + clocks = <&xtalclk>; + }; + + cpu_misc: system-controller@d000 { + compatible = "marvell,armada-3700-cpu-misc", + "syscon"; + reg = <0xd000 0x1000>; + }; + spi0: spi@10600 { compatible = "marvell,armada-3700-spi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts new file mode 100644 index 000000000000..1db44b0ec030 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -0,0 +1,434 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 SolidRun ltd. + * Based on Marvell MACCHIATOBin board + * + * Device Tree file for SolidRun's ClearFog GT 8K + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "SolidRun ClearFog GT 8K"; + compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp1_eth1; + ethernet1 = &cp0_eth0; + ethernet2 = &cp1_eth2; + }; + + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + usb3h0_phy: usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&v_5v0_usb3_hst_vbus>; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led0_pins + &cp0_led1_pins>; + pinctrl-names = "default"; + /* No designated function for these LEDs at the moment */ + led0 { + label = "clearfog-gt-8k:green:led0"; + gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led1 { + label = "clearfog-gt-8k:green:led1"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + + button_1 { + /* The wps button */ + label = "WPS Button"; + gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; +}; + +&cp0_pinctrl { + /* + * MPP Bus: + * [0-31] = 0xff: Keep default CP0_shared_pins: + * [11] CLKOUT_MPP_11 (out) + * [23] LINK_RD_IN_CP2CP (in) + * [25] CLKOUT_MPP_25 (out) + * [29] AVS_FB_IN_CP2CP (in) + * [32, 33, 34] pci0/1/2 reset + * [35-38] CP0 I2C1 and I2C0 + * [39] GPIO reset button + * [40,41] LED0 and LED1 + * [43] 1512 phy reset + * [47] USB VBUS EN (active low) + * [48] FAN PWM + * [49] SFP+ present signal + * [50] TPM interrupt + * [51] WLAN0 disable + * [52] WLAN1 disable + * [53] LTE disable + * [54] NFC reset + * [55] Micro SD card detect + * [56-61] Micro SD + */ + + cp0_pci0_reset_pins: pci0-reset-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_pci1_reset_pins: pci1-reset-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + cp0_pci2_reset_pins: pci2-reset-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_gpio_reset_pins: gpio-reset-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + cp0_led0_pins: led0-pins { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + cp0_led1_pins: led1-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + cp0_copper_eth_phy_reset: copper-eth-phy-reset { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + cp0_fan_pwm_pins: fan-pwm-pins { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + cp0_sfp_present_pins: sfp-present-pins { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + cp0_tpm_irq_pins: tpm-irq-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; +}; + +&cp0_gpio2 { + sata_reset { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SFP */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + sfp = <&sfp_cp0_eth0>; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp1_pinctrl { + /* + * MPP Bus: + * [0-5] TDM + * [6] VHV Enable + * [7] CP1 SPI0 CSn1 (FXS) + * [8] CP1 SPI0 CSn0 (TPM) + * [9.11]CP1 SPI0 MOSI/MISO/CLK + * [13] CP1 SPI1 MISO (TDM and SPI ROM shared) + * [14] CP1 SPI1 CS0n (64Mb SPI ROM) + * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared) + * [16] CP1 SPI1 CLK (TDM and SPI ROM shared) + * [24] Topaz switch reset + * [26] Buzzer + * [27] CP1 SMI MDIO + * [28] CP1 SMI MDC + * [29] CP0 10G SFP TX Disable + * [30] WPS button + * [31] Front panel button + */ + + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp1_switch_reset_pins: switch-reset-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + cp1_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp27", "mpp28"; + marvell,function = "ge"; + }; + + cp1_sfp_tx_disable_pins: sfp-tx-disable-pins { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + cp1_wps_button_pins: wps-button-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; +}; + +&cp1_sata0 { + pinctrl-0 = <&cp0_pci1_reset_pins>; + status = "okay"; +}; + +&cp1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + /* LED0 - GB link + * LED1 - on: link, blink: activity + */ + marvell,reg-init = <3 16 0 0x1017>; + reg = <0>; + }; + + switch0: switch0@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_switch_reset_pins>; + reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan2"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan4"; + phy-handle = <&switch0phy2>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp1_eth2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* 1G copper */ +&cp1_eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&ge_phy>; + phys = <&cp1_comphy3 1>; +}; + +/* Switch uplink */ +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy5 2>; + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_usb3_0 { + usb-phy = <&usb3h0_phy>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 176e38d54872..9a5abad72b66 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /dts-v1/; @@ -247,11 +248,76 @@ }; }; - ap_thermal: thermal@6f808c { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x6f808c 0x4>, - <0x6f8084 0x8>; + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + #thermal-sensor-cells = <1>; + }; }; }; }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * The cooling maps are always empty as there are no cooling devices. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 0>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu4: ap-thermal-cpu4 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { }; + cooling-maps { }; + }; + }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index d5e8aedec188..b29c6405d214 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -7,4 +7,5 @@ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) #define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) +#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 840c8454d03e..f3a630efcf3a 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> #include "armada-common.dtsi" @@ -19,6 +20,23 @@ * save one indentation level */ CP110_NAME: CP110_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&CP110_LABEL(thermal) 0>; + + trips { }; + cooling-maps { }; + }; + }; }; &CP110_NAME { @@ -52,9 +70,14 @@ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <0>; gop-port-id = <0>; status = "disabled"; @@ -66,9 +89,14 @@ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <1>; gop-port-id = <2>; status = "disabled"; @@ -80,9 +108,14 @@ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <2>; gop-port-id = <3>; status = "disabled"; @@ -162,12 +195,6 @@ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; }; - CP110_LABEL(thermal): thermal@400078 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x400078 0x4>, - <0x400070 0x8>; - }; - CP110_LABEL(syscon0): system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x2000>; @@ -208,6 +235,19 @@ }; }; + CP110_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP110_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + #thermal-sensor-cells = <1>; + }; + }; + CP110_LABEL(usb3_0): usb3@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 5b7fd6ad96e4..e8f952fb279b 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -5,4 +5,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 75cc0f7cc088..ee627a7c7b45 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -301,6 +301,17 @@ status = "disabled"; }; + spis1: spi@10013000 { + compatible = "mediatek,mt2712-spi-slave"; + reg = <0 0x10013000 0 0x100>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AO_SPI1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; + status = "disabled"; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt2712-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts new file mode 100644 index 000000000000..5d6005c9b097 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -0,0 +1,530 @@ +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ryder Lee <ryder.lee@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +#include "mt7622.dtsi" +#include "mt6380.dtsi" + +/ { + model = "Bananapi BPI-R64"; + compatible = "bananapi,bpi-r64", "mediatek,mt7622"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + + cpu@1 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + label = "bpi-r64:pio:green"; + gpios = <&pio 89 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red { + label = "bpi-r64:pio:red"; + gpios = <&pio 88 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pio { + /* Attention: GPIO 90 is used to switch between PCIe@1,0 and + * SATA functions. i.e. output-high: PCIe, output-low: SATA + */ + asm_sel { + gpio-hog; + gpios = <90 GPIO_ACTIVE_HIGH>; + output-high; + }; + + /* eMMC is shared pin with parallel NAND */ + emmc_pins_default: emmc-pins-default { + mux { + function = "emmc", "emmc_rst"; + groups = "emmc"; + }; + + /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", + * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, + * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively + */ + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + bias-pull-down; + }; + }; + + emmc_pins_uhs: emmc-pins-uhs { + mux { + function = "emmc"; + groups = "emmc"; + }; + + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + drive-strength = <4>; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + drive-strength = <4>; + bias-pull-down; + }; + }; + + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio", "rgmii_via_gmac2"; + }; + }; + + i2c1_pins: i2c1-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_pins: i2c2-pins { + mux { + function = "i2c"; + groups = "i2c2_0"; + }; + }; + + i2s1_pins: i2s1-pins { + mux { + function = "i2s"; + groups = "i2s_out_mclk_bclk_ws", + "i2s1_in_data", + "i2s1_out_data"; + }; + + conf { + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", + "I2S_WS", "I2S_MCLK"; + drive-strength = <12>; + bias-pull-down; + }; + }; + + irrx_pins: irrx-pins { + mux { + function = "ir"; + groups = "ir_1_rx"; + }; + }; + + irtx_pins: irtx-pins { + mux { + function = "ir"; + groups = "ir_1_tx"; + }; + }; + + /* Parallel nand is shared pin with eMMC */ + parallel_nand_pins: parallel-nand-pins { + mux { + function = "flash"; + groups = "par_nand"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie0_pad_perst", + "pcie0_1_waken", + "pcie0_1_clkreq"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie1_pad_perst", + "pcie1_0_waken", + "pcie1_0_clkreq"; + }; + }; + + pmic_bus_pins: pmic-bus-pins { + mux { + function = "pmic"; + groups = "pmic_bus"; + }; + }; + + pwm7_pins: pwm1-2-pins { + mux { + function = "pwm"; + groups = "pwm_ch7_2"; + }; + }; + + wled_pins: wled-pins { + mux { + function = "led"; + groups = "wled"; + }; + }; + + sd0_pins_default: sd0-pins-default { + mux { + function = "sd"; + groups = "sd_0"; + }; + + /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", + * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, + * DAT2, DAT3, CMD, CLK for SD respectively. + */ + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + drive-strength = <8>; + bias-pull-up; + }; + conf-clk { + pins = "I2S3_OUT"; + drive-strength = <12>; + bias-pull-down; + }; + conf-cd { + pins = "TXD3"; + bias-pull-up; + }; + }; + + sd0_pins_uhs: sd0-pins-uhs { + mux { + function = "sd"; + groups = "sd_0"; + }; + + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "I2S3_OUT"; + bias-pull-down; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + spic0_pins: spic0-pins { + mux { + function = "spi"; + groups = "spic0_0"; + }; + }; + + spic1_pins: spic1-pins { + mux { + function = "spi"; + groups = "spic1_0"; + }; + }; + + /* SPI-NOR is shared pin with serial NAND */ + spi_nor_pins: spi-nor-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + /* serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_0_tx_rx" ; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_1_tx_rx" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pins>; + status = "okay"; +}; + +&pwrap { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_bus_pins>; + + status = "okay"; +}; + +&sata { + status = "disable"; +}; + +&sata_phy { + status = "disable"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spic0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spic1_pins>; + status = "okay"; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index a747b7bf132d..dcad0869b84c 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -51,7 +51,7 @@ }; memory { - reg = <0 0x40000000 0 0x3F000000>; + reg = <0 0x40000000 0 0x20000000>; }; reg_1p8v: regulator-1p8v { @@ -81,6 +81,103 @@ }; }; +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie0_pins>; @@ -344,103 +441,6 @@ }; }; -&bch { - status = "disabled"; -}; - -&btif { - status = "okay"; -}; - -&cir { - pinctrl-names = "default"; - pinctrl-0 = <&irrx_pins>; - status = "okay"; -}; - -ð { - pinctrl-names = "default"; - pinctrl-0 = <ð_pins>; - status = "okay"; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy5>; - }; - - mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "sgmii"; - }; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&emmc_pins_default>; - pinctrl-1 = <&emmc_pins_uhs>; - status = "okay"; - bus-width = <8>; - max-frequency = <50000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; - non-removable; -}; - -&mmc1 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&sd0_pins_default>; - pinctrl-1 = <&sd0_pins_uhs>; - status = "okay"; - bus-width = <4>; - max-frequency = <50000000>; - cap-sd-highspeed; - r_smpl = <1>; - cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_3p3v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; -}; - -&nandc { - pinctrl-names = "default"; - pinctrl-0 = <¶llel_nand_pins>; - status = "disabled"; -}; - -&nor_flash { - pinctrl-names = "default"; - pinctrl-0 = <&spi_nor_pins>; - status = "disabled"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm7_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index de2c47bdbe64..fe0c875f1d95 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -79,6 +79,7 @@ #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; + cci-control-port = <&cci_control2>; }; cpu1: cpu@1 { @@ -92,6 +93,7 @@ #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; + cci-control-port = <&cci_control2>; }; }; @@ -113,6 +115,13 @@ method = "smc"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -218,6 +227,16 @@ #reset-cells = <1>; }; + timer: timer@10004000 { + compatible = "mediatek,mt7622-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10004000 0 0x80>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_APXGPT_PD>, + <&topckgen CLK_TOP_RTC>; + clock-names = "system-clk", "rtc-clk"; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt7622-scpsys", "syscon"; @@ -325,6 +344,42 @@ <0 0x10360000 0 0x2000>; }; + cci: cci@10390000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x10390000 0 0x1000>; + ranges = <0 0 0x10390000 0x10000>; + + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + auxadc: adc@11001000 { compatible = "mediatek,mt7622-auxadc"; reg = <0 0x11001000 0 0x1000>; @@ -475,6 +530,13 @@ reg-shift = <2>; reg-io-width = <4>; status = "disabled"; + + bluetooth { + compatible = "mediatek,mt7622-bluetooth"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; + clocks = <&clk25m>; + clock-names = "ref"; + }; }; nandc: nfi@1100d000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index b762227f6aa1..2f3c8e29520d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/memory/tegra186-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/reset/tegra186-reset.h> #include <dt-bindings/thermal/tegra186-bpmp-thermal.h> @@ -236,6 +237,20 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>; + nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; + assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>, + <&bpmp TEGRA186_CLK_PLLP_OUT0>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>; status = "disabled"; }; @@ -247,6 +262,15 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc2_3v3>; + pinctrl-1 = <&sdmmc2_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; status = "disabled"; }; @@ -258,6 +282,17 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc3_3v3>; + pinctrl-1 = <&sdmmc3_1v8>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; status = "disabled"; }; @@ -267,8 +302,19 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_SDMMC4>; clock-names = "sdhci"; + assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>, + <&bpmp TEGRA186_CLK_PLLC4_VCO>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>; resets = <&bpmp TEGRA186_RESET_SDMMC4>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>; + nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0x9>; + nvidia,dqs-trim = <63>; + mmc-hs400-1_8v; status = "disabled"; }; @@ -368,6 +414,36 @@ <0 0x0c380000 0 0x10000>, <0 0x0c390000 0 0x10000>; reg-names = "pmc", "wake", "aotag", "scratch"; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc2_3v3: sdmmc2-3v3 { + pins = "sdmmc2-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc2_1v8: sdmmc2-1v8 { + pins = "sdmmc2-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc3_1v8: sdmmc3-1v8 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; }; ccplex@e000000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index a4dfcd19b9e8..9fc14bb9a0af 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -118,7 +118,7 @@ }; gen1_i2c: i2c@3160000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03160000 0x10000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -143,7 +143,7 @@ }; cam_i2c: i2c@3180000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03180000 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -157,7 +157,7 @@ /* shares pads with dpaux1 */ dp_aux_ch1_i2c: i2c@3190000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03190000 0x10000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -171,7 +171,7 @@ /* shares pads with dpaux0 */ dp_aux_ch0_i2c: i2c@31b0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031b0000 0x10000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -184,7 +184,7 @@ }; gen7_i2c: i2c@31c0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031c0000 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -197,7 +197,7 @@ }; gen9_i2c: i2c@31e0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031e0000 0x10000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -264,7 +264,7 @@ }; gen2_i2c: i2c@c240000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x0c240000 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -277,7 +277,7 @@ }; gen8_i2c: i2c@c250000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x0c250000 0x10000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 212e6634c9ba..053458a5db55 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -178,16 +178,7 @@ vddio_sdmmc: ldo2 { regulator-name = "VDDIO_SDMMC"; - /* - * Technically this supply should have - * a supported range from 1.8 - 3.3 V. - * However, that would cause the SDHCI - * driver to request 2.7 V upon access - * and that in turn will cause traffic - * to be broken. Leave it at 3.3 V for - * now. - */ - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; @@ -282,6 +273,7 @@ status = "okay"; bus-width = <8>; non-removable; + vqmmc-supply = <&vdd_1v8>; }; clocks { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 9d5a0e6b2ca4..365726ddd418 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1452,7 +1452,6 @@ sdhci@700b0000 { status = "okay"; bus-width = <4>; - no-1-8-v; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 3be920efee82..8fe47d6445a5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/memory/tegra210-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/tegra124-soctherm.h> @@ -776,6 +777,26 @@ #power-domain-cells = <0>; }; }; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc3_1v8: sdmmc3-1v8 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; }; fuse@7000f800 { @@ -1027,6 +1048,20 @@ clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + nvidia,default-tap = <0x2>; + nvidia,default-trim = <0x4>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_C4>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-rates = <200000000>, <1000000000>, <1000000000>; status = "disabled"; }; @@ -1038,6 +1073,10 @@ clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x0>; status = "disabled"; }; @@ -1049,6 +1088,15 @@ clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc3_3v3>; + pinctrl-1 = <&sdmmc3_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + nvidia,default-tap = <0x3>; + nvidia,default-trim = <0x3>; status = "disabled"; }; @@ -1060,6 +1108,15 @@ clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x0>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + nvidia,dqs-trim = <40>; + mmc-hs400-1_8v; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 9319e74b8906..a658c07652a7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -6,4 +6,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 78ce3979ef09..46feedf7c989 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -545,6 +545,20 @@ }; }; +&spmi_bus { + pm8916_0: pm8916@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + &wcd_codec { status = "okay"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 230e9c8484ac..da23bdafbd33 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -17,5 +17,5 @@ / { model = "Qualcomm Technologies, Inc. DB820c"; - compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc"; + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 0ef90c6554a9..bf20c55a6bc4 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -623,3 +623,17 @@ }; }; }; + +&spmi_bus { + pmic@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 7b32b8990d62..d302d8d639a1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -18,9 +18,6 @@ #include <dt-bindings/thermal/thermal.h> / { - model = "Qualcomm Technologies, Inc. MSM8916"; - compatible = "qcom,msm8916"; - interrupt-parent = <&intc>; #address-cells = <2>; @@ -1099,10 +1096,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -1114,7 +1112,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -1132,12 +1130,13 @@ port@4 { reg = <4>; funnel0_in4: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel0_out: endpoint { remote-endpoint = <&etf_in>; }; @@ -1152,7 +1151,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -1168,10 +1167,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; @@ -1185,19 +1185,16 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&funnel0_out>; }; }; - port@1 { - reg = <0>; + }; + + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; @@ -1212,10 +1209,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -1227,40 +1225,38 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; funnel1_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel1_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; funnel1_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; funnel1_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@4 { - reg = <0>; + }; + + out-ports { + port { funnel1_out: endpoint { remote-endpoint = <&funnel0_in4>; }; @@ -1309,9 +1305,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel1_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; }; }; }; @@ -1325,9 +1323,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel1_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; }; }; }; @@ -1341,9 +1341,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel1_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; }; }; }; @@ -1357,9 +1359,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel1_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index cd3865e7a270..b29fe80d7288 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -16,8 +16,6 @@ #include <dt-bindings/clock/qcom,rpmcc.h> / { - model = "Qualcomm Technologies, Inc. MSM8996"; - interrupt-parent = <&intc>; #address-cells = <2>; @@ -409,11 +407,6 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - apcs: syscon@9820000 { - compatible = "syscon"; - reg = <0x9820000 0x1000>; - }; - apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; reg = <0x9820000 0x1000>; @@ -1140,7 +1133,7 @@ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; label = "lpass"; - qcom,ipc = <&apcs 16 8>; + mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; }; @@ -1152,7 +1145,7 @@ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 10>; + mboxes = <&apcs_glb 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -1176,7 +1169,7 @@ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 14>; + mboxes = <&apcs_glb 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -1200,7 +1193,7 @@ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 26>; + mboxes = <&apcs_glb 26>; qcom,local-pid = <0>; qcom,remote-pid = <3>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts new file mode 100644 index 000000000000..66540d2ca13b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; + compatible = "qcom,msm8998-mtp"; + + qcom,board-id = <8 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi new file mode 100644 index 000000000000..b4276da1fb0d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/ { + aliases { + serial0 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + thermal-zones { + battery-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + battery_crit: trip0 { + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + skin-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + skin_alert: trip0 { + temperature = <44000>; + hysteresis = <2000>; + type = "passive"; + }; + + skip_crit: trip1 { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi new file mode 100644 index 000000000000..78227cce16db --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -0,0 +1,690 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8998.h> + +/ { + interrupt-parent = <&intc>; + + qcom,msm-id = <292 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; + }; + + rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_0: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_0: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_1: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_1: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_2: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_2: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_3: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_3: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_100: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_100: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_101: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_101: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_102: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_102: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_103: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_103: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8998"; + qcom,glink-channels = "rpm_requests"; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal4 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu_alert4: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit4: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal5 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu_alert5: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit5: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal6 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + cpu_alert6: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit6: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal7 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + cpu_alert7: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit7: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: memory@68000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x778000 0x7000>; + }; + + qfprom: qfprom@780000 { + compatible = "qcom,qfprom"; + reg = <0x780000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x100000 0xb0000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x3400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x800f000 0x1000>, + <0x8400000 0x1000000>, + <0x9400000 0x1000000>, + <0xa400000 0x220000>, + <0x800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + tsens0: thermal@10aa000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x10aa000 0x2000>; + + #qcom,sensors = <12>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal@10ad000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x10ad000 0x2000>; + + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x1f40000 0x20000>; + }; + + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8998-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xc1b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 196b1c0ceb9b..15a37cbcd216 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -18,12 +19,19 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8916-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; }; pm8916_gpios: gpios@c000 { diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 80024c0b1c7c..76b5a3e6a2b5 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/input/linux-event-codes.h> &spmi_bus { @@ -17,6 +18,23 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + }; + pm8994_gpios: gpios@c000 { compatible = "qcom,pm8994-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 92bed1e7d4bb..048f19fa0150 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -1,8 +1,35 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* Copyright 2018 Google LLC. */ -#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm8998 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8998_temp>; + + trips { + pm8998_alert0: pm8998-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8998_crit: pm8998-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { pm8998_lsid0: pmic@0 { @@ -11,6 +38,52 @@ #address-cells = <1>; #size-cells = <0>; + pm8998_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + pm8998_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + }; + + pm8998_coincell: coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + status = "disabled"; + }; + + pm8998_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pm8998_gpio: gpios@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi new file mode 100644 index 000000000000..da3285e216e2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmi8998_lsid0: pmic@2 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8998_gpio: gpios@c000 { + compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>; + }; + }; + + pmi8998_lsid1: pmic@3 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 6d651f314193..eedfaf8922e2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" / { @@ -20,6 +21,326 @@ chosen { stdout-path = "serial0:115200n8"; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; }; &i2c10 { @@ -35,6 +356,67 @@ status = "okay"; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as host. */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* + * Though the USB block on SDM845 can support host, there's no vbus + * signal for this port on MTP. Thus (unless you have a non-compliant + * hub that works without vbus) the only sensible thing is to force + * peripheral mode. + */ + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0c9a2aa6a1b5..b72bdb0a31a5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,9 +5,12 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / { @@ -230,6 +233,94 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -249,6 +340,23 @@ #power-domain-cells = <1>; }; + qfprom@784000 { + compatible = "qcom,qfprom"; + reg = <0x784000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + + qusb2s_hstx_trim: hstx-trim-secondary@1eb { + reg = <0x1eb 0x2>; + bits = <6 4>; + }; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x8c0000 0x6000>; @@ -962,6 +1070,192 @@ }; }; + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sdm845-qusb2-phy"; + reg = <0x88e2000 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sdm845-qusb2-phy"; + reg = <0x88e3000 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + nvmem-cells = <&qusb2s_hstx_trim>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-phy"; + reg = <0x88e9000 0x18c>, + <0x88e8000 0x10>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: lane@88e9200 { + reg = <0x88e9200 0x128>, + <0x88e9400 0x200>, + <0x88e9c00 0x218>, + <0x88e9a00 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x88eb000 0x18c>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: lane@88eb200 { + reg = <0x88eb200 0x128>, + <0x88eb400 0x1fc>, + <0x88eb800 0x218>, + <0x88e9600 0x70>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0xa6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0xa600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0xa8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0xa800000 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0xaf00000 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + tsens0: thermal-sensor@c263000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; reg = <0xc263000 0x1ff>, /* TM */ @@ -978,6 +1272,12 @@ #thermal-sensor-cells = <1>; }; + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>, diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 9e2394bc3c62..a8ce6594342d 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi new file mode 100644 index 000000000000..012cbb64246e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -0,0 +1,1663 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774a1 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/ { + compatible = "renesas,r8a774a1"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc 0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE 0>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc 1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE 0>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc 6>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc 7>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc 8>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc 12>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774a1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc 32>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc 32>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc 32>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc 32>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc 32>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc 32>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc 32>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc 32>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc 32>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774a1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774a1-cpg-mssr"; + reg = <0 0xe6150000 0 0x0bb0>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774a1-rst"; + reg = <0 0xe6160000 0 0x018c>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774a1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774a1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc 32>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc 32>; + resets = <&cpg 407>; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc 32>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc 32>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc 32>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc 32>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc 32>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc 32>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc 32>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774a1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc 32>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774a1", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 704>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774a1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc 32>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774a1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc 32>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774a1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: mmu@fd950000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc 14>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774a1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc 32>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE 10>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc 32>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774a1", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774a1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774a1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774a1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 311>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc 14>; + resets = <&cpg 615>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc 14>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc 32>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc 32>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + fcpvd2: fcp@fea37000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea37000 0 0x200>; + clocks = <&cpg CPG_MOD 601>; + power-domains = <&sysc 32>; + resets = <&cpg 601>; + iommus = <&ipmmu_vi0 10>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc 14>; + resets = <&cpg 611>; + iommus = <&ipmmu_vc0 19>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 6b5fa91f1d5d..0895503b69d0 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&x22_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 7b2fbaec9aef..0fb84c219b2f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7795 ES1.x SoC + * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -232,7 +232,7 @@ port@1 { vin0csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin0>; + remote-endpoint = <&csi21vin0>; }; }; }; @@ -243,7 +243,7 @@ port@1 { vin1csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin1>; + remote-endpoint = <&csi21vin1>; }; }; }; @@ -254,7 +254,7 @@ port@1 { vin2csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin2>; + remote-endpoint = <&csi21vin2>; }; }; }; @@ -265,7 +265,7 @@ port@1 { vin3csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin3>; + remote-endpoint = <&csi21vin3>; }; }; }; @@ -276,7 +276,7 @@ port@1 { vin4csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin4>; + remote-endpoint = <&csi21vin4>; }; }; }; @@ -287,7 +287,7 @@ port@1 { vin5csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin5>; + remote-endpoint = <&csi21vin5>; }; }; }; @@ -298,7 +298,7 @@ port@1 { vin6csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin6>; + remote-endpoint = <&csi21vin6>; }; }; }; @@ -309,7 +309,7 @@ port@1 { vin7csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin7>; + remote-endpoint = <&csi21vin7>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index df50bf46406e..54515eaf0310 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -41,11 +41,10 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&versaclock5 3>, <&versaclock5 4>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 446822f5751c..1620e8d8dacc 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&x22_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 8ded64d0a4d5..cf08a119eec0 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock6 1>, <&x21_clk>, <&x22_clk>, <&versaclock6 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; @@ -152,6 +151,15 @@ }; }; +&pca9654 { + pcie_sata_switch { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + &pfc { usb2_pins: usb2 { groups = "usb2"; @@ -176,6 +184,11 @@ }; }; +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +&sata { + status = "okay"; +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index fb9d08ad7659..b5f2273caca4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7795 SoC + * Device Tree Source for the R-Car H3 (R8A77950) SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -123,7 +123,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -135,7 +135,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -147,7 +147,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -159,7 +159,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -171,7 +171,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -182,7 +182,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -193,7 +193,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -204,7 +204,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -455,7 +455,6 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -525,15 +524,6 @@ status = "disabled"; }; - arm_cc630p: crypto@e6601000 { - compatible = "arm,cryptocell-630p-ree"; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xe6601000 0 0x1000>; - clocks = <&cpg CPG_MOD 229>; - resets = <&cpg 229>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - }; - i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; @@ -707,7 +697,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -715,7 +705,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -724,7 +714,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe659c000 0 0x100>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 705>; + clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>; dmas = <&usb_dmac2 0>, <&usb_dmac2 1>, <&usb_dmac3 0>, <&usb_dmac3 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -732,7 +722,7 @@ phys = <&usb2_phy3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 705>; + resets = <&cpg 705>, <&cpg 700>; status = "disabled"; }; @@ -805,6 +795,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; @@ -1425,11 +1424,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1457,11 +1456,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1489,11 +1488,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1521,11 +1520,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1553,11 +1552,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin4>; + remote-endpoint = <&csi41vin4>; }; }; }; @@ -1585,11 +1584,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin5>; + remote-endpoint = <&csi41vin5>; }; }; }; @@ -1617,11 +1616,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin6>; + remote-endpoint = <&csi41vin6>; }; }; }; @@ -1649,11 +1648,11 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin7>; + remote-endpoint = <&csi41vin7>; }; }; }; @@ -2098,11 +2097,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2134,11 +2133,11 @@ compatible = "generic-ohci"; reg = <0 0xee0e0000 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; phys = <&usb2_phy3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; status = "disabled"; }; @@ -2146,12 +2145,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2185,12 +2184,12 @@ compatible = "generic-ehci"; reg = <0 0xee0e0100 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; phys = <&usb2_phy3>; phy-names = "usb"; companion = <&ohci3>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; status = "disabled"; }; @@ -2199,9 +2198,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -2233,9 +2232,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0e0200 0 0x700>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; #phy-cells = <0>; status = "disabled"; }; @@ -2782,9 +2781,7 @@ du: display@feb00000 { compatible = "renesas,du-r8a7795"; - reg = <0 0xfeb00000 0 0x80000>, - <0 0xfeb90000 0 0x14>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x80000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, @@ -2792,9 +2789,8 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.2", "du.3"; vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>; status = "disabled"; @@ -2822,6 +2818,33 @@ port@3 { reg = <3>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index cbd8acbf537e..9e4594c27fa6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -30,10 +30,9 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&versaclock5 3>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 052d72acc862..b4f9567cb9f8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -29,11 +29,10 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index cbd35c00b4af..1ec6aaa520c1 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7796 SoC + * Device Tree Source for the R-Car M3-W (R8A77960) SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. */ @@ -134,7 +134,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -146,7 +146,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -158,7 +158,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -169,7 +169,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -180,7 +180,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -191,7 +191,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -434,7 +434,6 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -677,7 +676,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -685,7 +684,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -1299,11 +1298,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1331,11 +1330,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1363,11 +1362,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1395,11 +1394,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1427,11 +1426,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1459,11 +1458,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1491,11 +1490,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin6>; + remote-endpoint = <&csi40vin6>; }; }; }; @@ -1523,11 +1522,11 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin7>; + remote-endpoint = <&csi40vin7>; }; }; }; @@ -1970,11 +1969,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1994,12 +1993,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; - companion= <&ohci0>; + companion = <&ohci0>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2010,7 +2009,7 @@ clocks = <&cpg CPG_MOD 702>; phys = <&usb2_phy1>; phy-names = "usb"; - companion= <&ohci1>; + companion = <&ohci1>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; @@ -2021,9 +2020,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -2437,17 +2436,14 @@ du: display@feb00000 { compatible = "renesas,du-r8a7796"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x14>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x70000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>; - clock-names = "du.0", "du.1", "du.2", "lvds.0"; + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; status = "disabled"; vsps = <&vspd0 &vspd1 &vspd2>; @@ -2470,6 +2466,33 @@ port@2 { reg = <2>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7796-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts new file mode 100644 index 000000000000..dadad97051b9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3NULCB Kingfisher board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +#include "r8a77965-m3nulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas M3NULCB Kingfisher board based on r8a77965"; + compatible = "shimafuji,kingfisher", "renesas,m3nulcb", + "renesas,r8a77965"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts new file mode 100644 index 000000000000..964078b6cc49 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77965.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas M3NULCB board based on r8a77965"; + compatible = "renesas,m3nulcb", "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index 9de4e3db1621..f03a5e9e0c42 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -47,3 +47,17 @@ &hdmi0_con { remote-endpoint = <&rcar_dw_hdmi0_out>; }; + +&pca9654 { + pcie_sata_switch { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 0cd44461a0bd..83946ca2eba5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77965 SoC + * Device Tree Source for the R-Car M3-N (R8A77965) SoC * * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> * @@ -12,7 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77965-sysc.h> -#define CPG_AUDIO_CLK_I 10 +#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4 / { compatible = "renesas,r8a77965"; @@ -60,6 +60,46 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -71,6 +111,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; }; a57_1: cpu@1 { @@ -80,6 +122,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; }; L2_CA57: cache-controller-0 { @@ -306,7 +350,6 @@ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -545,11 +588,11 @@ }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7796", + compatible = "renesas,usbhs-r8a77965", "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -557,7 +600,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -634,6 +677,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -668,6 +719,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -702,6 +761,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: mmu@e6740000 { @@ -838,6 +905,16 @@ status = "disabled"; }; + can0: can@e6c30000 { + reg = <0 0xe6c30000 0 0x1000>; + /* placeholder */ + }; + + can1: can@e6c38000 { + reg = <0 0xe6c38000 0 0x1000>; + /* placeholder */ + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 8>; @@ -1089,11 +1166,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1121,11 +1198,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1153,11 +1230,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1185,11 +1262,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1217,11 +1294,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1249,11 +1326,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1281,11 +1358,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin6>; + remote-endpoint = <&csi40vin6>; }; }; }; @@ -1313,57 +1390,280 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin7>; + remote-endpoint = <&csi40vin7>; }; }; }; }; rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - /* placeholder */ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A77965_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; rcar_sound,dvc { dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; }; dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; }; }; + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,src { src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; }; src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; }; }; rcar_sound,ssi { ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; }; - port@1 { - reg = <1>; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; }; }; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a77965", "renesas,rcar-gen3-xhci"; @@ -1390,11 +1690,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1414,12 +1714,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1441,9 +1741,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -1452,9 +1752,9 @@ compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 702>; #phy-cells = <0>; status = "disabled"; }; @@ -1507,6 +1807,17 @@ status = "disabled"; }; + sata: sata@ee300000 { + compatible = "renesas,sata-r8a77965", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1578,6 +1889,16 @@ status = "disabled"; }; + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; @@ -1843,14 +2164,6 @@ }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - thermal-zones { sensor_thermal1: sensor-thermal1 { polling-delay-passive = <250>; @@ -1895,6 +2208,14 @@ }; }; + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + /* External USB clocks - can be overridden by the board */ usb3s0_clk: usb3s0 { compatible = "fixed-clock"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 8eac8ca6550b..0dbcb4cccc18 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -51,6 +51,15 @@ regulator-always-on; }; + vcc_vddq_vin0: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "VCC_VDDQ_VIN0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <&vcc_d3_3v>; @@ -128,6 +137,12 @@ function = "i2c0"; }; + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -192,6 +207,17 @@ }; }; +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_d3_3v>; + vqmmc-supply = <&vcc_vddq_vin0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 954168858fed..cba7885cf7c3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77970 SoC + * Device Tree Source for the R-Car V3M (R8A77970) SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. @@ -24,6 +24,13 @@ i2c4 = &i2c4; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -82,13 +89,6 @@ method = "smc"; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -209,6 +209,76 @@ reg = <0 0xe6060000 0 0x504>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77970-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77970-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -544,6 +614,16 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77970", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; vin0: video@e6ef0000 { compatible = "renesas,vin-r8a77970"; @@ -567,7 +647,7 @@ vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -595,7 +675,7 @@ vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -623,7 +703,7 @@ vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -651,7 +731,7 @@ vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -754,6 +834,18 @@ #iommu-cells = <1>; }; + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a77970", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 314>; + max-frequency = <200000000>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 9f25c407dfd7..fe2e2c051cc9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -45,6 +45,56 @@ regulator-boot-on; regulator-always-on; }; + + d1_8v: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &avb { @@ -74,6 +124,13 @@ }; }; +&du { + clocks = <&cpg CPG_MOD 724>, + <&x1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -102,6 +159,55 @@ gpio-controller; #gpio-cells = <2>; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + bgvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; }; &mmc0 { @@ -117,6 +223,18 @@ status = "okay"; }; +&pciec { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pcie_phy { + status = "okay"; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_rgmii"; @@ -156,6 +274,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 9dac42f8f804..dd14a41b32cd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -27,6 +27,72 @@ /* first 128MB is reserved for secure area. */ reg = <0 0x48000000 0 0x78000000>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc3v3_d5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + osc1_clk: osc1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + vcc1v8_d4: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_D4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc3v3_d5: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_D5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&osc1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; }; &extal_clk { @@ -53,6 +119,64 @@ }; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + #sound-dai-cells = <0>; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&vcc1v8_d4>; + dvdd-supply = <&vcc1v8_d4>; + pvdd-supply = <&vcc1v8_d4>; + bgvdd-supply = <&vcc1v8_d4>; + dvdd-3v-supply = <&vcc3v3_d5>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &pfc { gether_pins: gether { groups = "gether_mdio_a", "gether_rgmii", @@ -60,6 +184,11 @@ function = "gether"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -71,6 +200,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index b8c9a56562f2..d4952b527d14 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77980 SoC + * Device Tree Source for the R-Car V3H (R8A77980) SoC * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. @@ -25,6 +25,13 @@ i2c5 = &i2c5; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -77,27 +84,36 @@ }; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; + /* This value must be overridden by the board */ clock-frequency = <0>; }; - extal_clk: extal { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; }; - extalr_clk: extalr { + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; - /* This value must be overridden by the board */ clock-frequency = <0>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -118,6 +134,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77980-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77980", "renesas,rcar-gen3-gpio"; @@ -213,6 +239,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77980-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77980-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -418,6 +514,16 @@ status = "disabled"; }; + pcie_phy: pcie-phy@e65d0000 { + compatible = "renesas,r8a77980-pcie-phy"; + reg = <0 0xe65d0000 0 0x8000>; + #phy-cells = <0>; + clocks = <&cpg CPG_MOD 319>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + canfd: can@e66c0000 { compatible = "renesas,r8a77980-canfd", "renesas,rcar-gen3-canfd"; @@ -443,69 +549,6 @@ }; }; - ipmmu_ds1: mmu@e7740000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7740000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip0: mmu@e7b00000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7b00000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip1: mmu@e7960000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7960000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_ir: mmu@ff8b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xff8b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 3>; - power-domains = <&sysc R8A77980_PD_A3IR>; - #iommu-cells = <1>; - }; - - ipmmu_mm: mmu@e67b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe67b0000 0 0x1000>; - interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xffc80000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vc0: mmu@fe6b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfe6b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 12>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vi0: mmu@febd0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfebd0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 14>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77980", "renesas,etheravb-rcar-gen3"; @@ -623,6 +666,313 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77980", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + status = "disabled"; + resets = <&cpg 810>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 807>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 806>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 805>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 804>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin7>; + }; + }; + }; + }; + + vin8: video@e6ef8000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + vin9: video@e6ef9000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 627>; + status = "disabled"; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 625>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 625>; + status = "disabled"; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 618>; + status = "disabled"; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 612>; + status = "disabled"; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 608>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 608>; + status = "disabled"; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 605>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 605>; + status = "disabled"; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 604>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 604>; + status = "disabled"; + }; + dmac1: dma-controller@e7300000 { compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac"; @@ -655,6 +1005,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -689,6 +1047,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; gether: ethernet@e7400000 { @@ -703,6 +1069,69 @@ status = "disabled"; }; + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77980_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: mmu@e7b00000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7b00000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: mmu@e7960000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7960000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a77980", "renesas,rcar-gen3-sdhi"; @@ -732,6 +1161,38 @@ resets = <&cpg 408>; }; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a77980", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = < + 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000 + >; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 + 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 + IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 319>; + phys = <&pcie_phy>; + phy-names = "pcie"; + status = "disabled"; + }; + vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; reg = <0 0xfea20000 0 0x5000>; @@ -750,6 +1211,84 @@ resets = <&cpg 603>; }; + csi40: csi2@feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2@feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi41vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi41>; + }; + csi41vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi41>; + }; + csi41vin6: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin6csi41>; + }; + csi41vin7: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin7csi41>; + }; + }; + }; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77980", "renesas,du-r8a77970"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 2bc3a4884b00..f342dd85b152 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -28,6 +28,111 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &avb { @@ -47,6 +152,41 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; @@ -55,6 +195,105 @@ clock-frequency = <48000000>; }; +&i2c0 { + status = "okay"; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio0>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>, + <17 IRQ_TYPE_LEVEL_LOW>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@a { + reg = <0xa>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi40_in>; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + &ohci0 { status = "okay"; }; @@ -67,6 +306,21 @@ }; }; + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + pwm3_pins: pwm3 { + groups = "pwm3_b"; + function = "pwm3"; + }; + + pwm5_pins: pwm5 { + groups = "pwm5_a"; + function = "pwm5"; + }; + usb0_pins: usb { groups = "usb0_b"; function = "usb0"; @@ -78,6 +332,20 @@ }; }; +&pwm3 { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm5 { + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -94,6 +362,10 @@ status = "okay"; }; +&vin4 { + status = "okay"; +}; + &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index ae89260baad9..9509dc05665f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1,11 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Device Tree Source for the r8a77990 SoC + * Device Tree Source for the R-Car E3 (R8A77990) SoC * * Copyright (C) 2018 Renesas Electronics Corp. */ -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77990-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77990-sysc.h> @@ -14,6 +14,17 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -22,7 +33,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; device_type = "cpu"; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; @@ -31,14 +42,14 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <1>; device_type = "cpu"; - power-domains = <&sysc 6>; + power-domains = <&sysc R8A77990_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; L2_CA53: cache-controller-0 { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77990_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -63,6 +74,13 @@ method = "smc"; }; + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -75,7 +93,7 @@ "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 402>; status = "disabled"; }; @@ -91,7 +109,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 912>; }; @@ -106,7 +124,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 911>; }; @@ -121,7 +139,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 910>; }; @@ -136,7 +154,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 909>; }; @@ -151,7 +169,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 908>; }; @@ -166,7 +184,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 907>; }; @@ -181,10 +199,122 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 906>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 906>; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 919>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 918>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c7: i2c@e6690000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6690000 0 0x40>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1003>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 1003>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77990"; reg = <0 0xe6060000 0 0x508>; @@ -211,6 +341,132 @@ #power-domain-cells = <1>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + ipmmu_ds0: mmu@e6740000 { compatible = "renesas,ipmmu-r8a77990"; reg = <0 0xe6740000 0 0x1000>; @@ -329,7 +585,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; #address-cells = <1>; @@ -337,18 +593,191 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77990", "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "fck"; - power-domains = <&sysc 32>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a77990"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + vin4csi40: endpoint { + remote-endpoint= <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a77990"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + vin5csi40: endpoint { + remote-endpoint= <&csi40vin5>; + }; + }; + }; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a77990", "renesas,rcar-gen3-xhci"; @@ -364,11 +793,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -376,12 +805,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -390,9 +819,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -410,10 +839,208 @@ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 408>; }; + vspb0: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 626>; + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 631>; + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi40>; + }; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77990"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + vsps = <&vspd0 0 &vspd1 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index a8e8f2669d4c..2405eaad0296 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for the Draak board * - * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016-2018 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba */ @@ -24,55 +24,58 @@ stdout-path = "serial0:115200n8"; }; - vga { - compatible = "vga-connector"; + composite-in { + compatible = "composite-video-connector"; port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; }; }; }; - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; }; }; }; - composite-in { - compatible = "composite-video-connector"; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; port { - composite_con_in: endpoint { - remote-endpoint = <&adv7180_in>; + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; }; }; }; - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; }; }; }; @@ -101,76 +104,86 @@ regulator-always-on; }; - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; + vga { + compatible = "vga-connector"; -&pfc { - avb0_pins: avb { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_mii"; - function = "avb0"; + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; }; }; - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; + vga-encoder { + compatible = "adi,adv7123"; - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; }; - pwm0_pins: pwm0 { - groups = "pwm0_c"; - function = "pwm0"; + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; }; +}; - pwm1_pins: pwm1 { - groups = "pwm1_c"; - function = "pwm1"; - }; +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + status = "okay"; - scif2_pins: scif2 { - groups = "scif2_data"; - function = "scif2"; + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; }; +}; - sdhi2_pins: sd2 { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; - sdhi2_pins_uhs: sd2_uhs { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; }; +}; - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; - function = "vin4"; - }; +&ehci0 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; }; &i2c0 { @@ -178,12 +191,6 @@ pinctrl-names = "default"; status = "okay"; - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; - composite-in@20 { compatible = "adi,adv7180cp"; reg = <0x20>; @@ -218,6 +225,43 @@ }; + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; + reg-names = "main", "edid", "packet", "cec"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + /* Depends on LVDS */ + max-clock = <135000000>; + min-vrefresh = <50>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + hdmi-decoder@4c { compatible = "adi,adv7612"; reg = <0x4c>; @@ -254,6 +298,12 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &i2c1 { @@ -262,47 +312,112 @@ status = "okay"; }; -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; +&lvds0 { status = "okay"; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x12_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; }; }; }; }; -&ehci0 { - status = "okay"; +&lvds1 { + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; }; &ohci0 { status = "okay"; }; -&avb { - pinctrl-0 = <&avb0_pins>; +&pfc { + avb0_pins: avb { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_mii"; + function = "avb0"; + }; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + pwm0_pins: pwm0 { + groups = "pwm0_c"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_c"; + function = "pwm1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + status = "okay"; +}; - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; - }; +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif2 { @@ -333,25 +448,6 @@ status = "okay"; }; -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm1 { - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &vin4 { pinctrl-0 = <&vin4_pins_cvbs>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index fe77bc43c447..214f4954b321 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77995 SoC + * Device Tree Source for the R-Car D3 (R8A77995) SoC * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba @@ -391,6 +391,10 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>; }; dmac1: dma-controller@e7300000 { @@ -415,6 +419,10 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>; }; dmac2: dma-controller@e7310000 { @@ -439,6 +447,10 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>; }; ipmmu_ds0: mmu@e6740000 { @@ -817,11 +829,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -829,12 +841,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -843,9 +855,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -960,12 +972,68 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; }; }; port@2 { reg = <2>; du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77995-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a77995-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 7d3d866a0063..7f91ff524109 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -420,7 +420,10 @@ video-receiver@70 { compatible = "adi,adv7482"; - reg = <0x70>; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; #address-cells = <1>; #size-cells = <0>; @@ -471,6 +474,8 @@ &i2c_dvfs { status = "okay"; + clock-frequency = <400000>; + pmic: pmic@30 { pinctrl-0 = <&irq0_pins>; pinctrl-names = "default"; @@ -748,6 +753,7 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; @@ -777,6 +783,7 @@ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 8bf3091a899c..1b316d79df88 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -127,7 +127,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x71>; - reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0ead552d7eae..89daca7356df 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -18,6 +18,7 @@ }; chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -241,6 +242,8 @@ &i2c_dvfs { status = "okay"; + clock-frequency = <400000>; + pmic: pmic@30 { pinctrl-0 = <&irq0_pins>; pinctrl-names = "default"; @@ -416,6 +419,7 @@ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi new file mode 100644 index 000000000000..7331acf3874e --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/as370.dtsi @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2018 Synaptics Incorporated + * + * Author: Jisheng Zhang <jszhang@kernel.org> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "syna,as370"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + l2: cache { + compatible = "cache"; + }; + + idle-states { + entry-method = "psci"; + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <75>; + exit-latency-us = <155>; + min-residency-us = <1000>; + }; + }; + }; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc@f7000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xf7000000 0x1000000>; + + gic: interrupt-controller@901000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x901000 0x1000>, + <0x902000 0x2000>, + <0x904000 0x2000>, + <0x906000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe80000 0x10000>; + + uart0: serial@c00 { + compatible = "snps,dw-apb-uart"; + reg = <0xc00 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + status = "disabled"; + }; + + gpio0: gpio@1800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x2000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 2409344df4fa..adcd6341e40c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -8,13 +8,13 @@ &cbass_main { gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; - reg = <0x01800000 0x10000>, /* GICD */ - <0x01880000 0x90000>; /* GICR */ + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0x90000>; /* GICR */ /* * vcpumntirq: * virtual CPU interface maintenance interrupt @@ -23,9 +23,50 @@ gic_its: gic-its@18200000 { compatible = "arm,gic-v3-its"; - reg = <0x01820000 0x10000>; + reg = <0x00 0x01820000 0x00 0x10000>; msi-controller; #msi-cells = <1>; }; }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi new file mode 100644 index 000000000000..8c611d16df44 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family MCU Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu { + mcu_uart0: serial@40a00000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi new file mode 100644 index 000000000000..affc3c309353 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_wakeup { + dmsc: dmsc { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index cede1fa0983c..3d4bf369d030 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -16,6 +16,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + }; + chosen { }; firmware { @@ -46,38 +54,38 @@ cbass_main: interconnect@100000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ - <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ - <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ - <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */ - <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ /* MCUSS Range */ - <0x28380000 0x00 0x28380000 0x03880000>, - <0x40200000 0x00 0x40200000 0x00900100>, - <0x42040000 0x00 0x42040000 0x03ac2400>, - <0x45100000 0x00 0x45100000 0x00c24000>, - <0x46000000 0x00 0x46000000 0x00200000>, - <0x47000000 0x00 0x47000000 0x00068400>; + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; cbass_mcu: interconnect@28380000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/ - <0x40200000 0x40200000 0x00900100>, /* First peripheral window */ - <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ - <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */ - <0x46000000 0x46000000 0x00200000>, /* CPSW */ - <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */ cbass_wakeup: interconnect@42040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; /* WKUP Basic peripherals */ - ranges = <0x42040000 0x42040000 0x03ac2400>; + ranges = <0x42040000 0x00 0x42040000 0x03ac2400>; }; }; }; @@ -85,3 +93,5 @@ /* Now include the peripherals for each bus segments */ #include "k3-am65-main.dtsi" +#include "k3-am65-mcu.dtsi" +#include "k3-am65-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index af6956fdc13f..e146ac2ad781 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -34,3 +34,8 @@ }; }; }; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "disabled"; +}; |