diff options
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 8 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-htcherald.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-nokia770.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 12 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmtt.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmz71.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-voiceblue.c | 16 |
10 files changed, 30 insertions, 33 deletions
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index c3068622fdcb..553a2e535764 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -245,8 +245,6 @@ static struct resource h2_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -359,11 +357,9 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata h2_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .irq = OMAP_GPIO_IRQ(58), .platform_data = &tps_board, }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(2), }, }; @@ -428,8 +424,12 @@ static void __init h2_init(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); + h2_smc91x_resources[1].start = gpio_to_irq(0); + h2_smc91x_resources[1].end = gpio_to_irq(0); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_serial_init(); + h2_i2c_board_info[0].irq = gpio_to_irq(58); + h2_i2c_board_info[1].irq = gpio_to_irq(2); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 64b8584f64ce..4c19f4c06851 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -247,8 +247,6 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(40), - .end = OMAP_GPIO_IRQ(40), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -338,7 +336,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { .modalias = "tsc2101", .bus_num = 2, .chip_select = 0, - .irq = OMAP_GPIO_IRQ(H3_TS_GPIO), .max_speed_hz = 16000000, /* .platform_data = &tsc_platform_data, */ }, @@ -374,11 +371,9 @@ static struct omap_lcd_config h3_lcd_config __initdata = { static struct i2c_board_info __initdata h3_i2c_board_info[] = { { I2C_BOARD_INFO("tps65013", 0x48), - /* .irq = OMAP_GPIO_IRQ(??), */ }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(14), }, }; @@ -420,10 +415,14 @@ static void __init h3_init(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); + smc91x_resources[1].start = gpio_to_irq(40); + smc91x_resources[1].end = gpio_to_irq(40); platform_add_devices(devices, ARRAY_SIZE(devices)); + h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); omap_serial_init(); + h3_i2c_board_info[1].irq = gpio_to_irq(14); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); omap1_usb_init(&h3_usb_config); diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 827d83a96af8..60c06ee23855 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -324,8 +324,6 @@ static struct platform_device gpio_leds_device = { static struct resource htcpld_resources[] = { [0] = { - .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), - .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), .flags = IORESOURCE_IRQ, }, }; @@ -450,7 +448,6 @@ static struct spi_board_info __initdata htcherald_spi_board_info[] = { { .modalias = "ads7846", .platform_data = &htcherald_ts_platform_data, - .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS), .max_speed_hz = 2500000, .bus_num = 2, .chip_select = 1, @@ -576,6 +573,8 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ + htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS); + htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS); platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); @@ -583,6 +582,7 @@ static void __init htcherald_init(void) htcherald_usb_enable(); omap1_usb_init(&htcherald_usb_config); + htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS); spi_register_board_info(htcherald_spi_board_info, ARRAY_SIZE(htcherald_spi_board_info)); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 61219182d16a..67d7fd57a692 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -248,8 +248,6 @@ static struct resource innovator1610_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -409,6 +407,8 @@ static void __init innovator_init(void) #endif #ifdef CONFIG_ARCH_OMAP16XX if (!cpu_is_omap1510()) { + innovator1610_smc91x_resources[1].start = gpio_to_irq(0); + innovator1610_smc91x_resources[1].end = gpio_to_irq(0); platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices)); } #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index fe95ec5f6f03..d21dcc2fbc5a 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -147,7 +147,6 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { .bus_num = 2, .chip_select = 0, .max_speed_hz = 2500000, - .irq = OMAP_GPIO_IRQ(15), .platform_data = &nokia770_ads7846_platform_data, }, }; @@ -237,6 +236,7 @@ static void __init omap_nokia770_init(void) omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); + nokia770_spi_board_info[1].irq = gpio_to_irq(15); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 1fe347396f4d..a5f85dda3f69 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -129,8 +129,6 @@ static struct resource osk5912_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -147,8 +145,6 @@ static struct platform_device osk5912_smc91x_device = { static struct resource osk5912_cf_resources[] = { [0] = { - .start = OMAP_GPIO_IRQ(62), - .end = OMAP_GPIO_IRQ(62), .flags = IORESOURCE_IRQ, }, }; @@ -240,7 +236,6 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata osk_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)), .platform_data = &tps_board, }, @@ -408,7 +403,6 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &mistral_ts_info, - .irq = OMAP_GPIO_IRQ(4), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -471,6 +465,7 @@ static void __init osk_mistral_init(void) gpio_direction_input(4); irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); + mistral_boardinfo[0].irq = gpio_to_irq(4); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -542,6 +537,10 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; + osk5912_smc91x_resources[1].start = gpio_to_irq(0); + osk5912_smc91x_resources[1].end = gpio_to_irq(0); + osk5912_cf_resources[0].start = gpio_to_irq(62); + osk5912_cf_resources[0].end = gpio_to_irq(62); platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); l = omap_readl(USB_TRANSCEIVER_CTRL); @@ -556,6 +555,7 @@ static void __init osk_init(void) gpio_direction_input(OMAP_MPUIO(1)); omap_serial_init(); + osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1)); omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 0863d8e2bdf1..a60e6c22f816 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -217,7 +217,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { .modalias = "tsc2102", .bus_num = 2, /* uWire (officially) */ .chip_select = 0, /* As opposed to 3 */ - .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), .max_speed_hz = 8000000, }, }; @@ -251,6 +250,7 @@ static void __init omap_palmte_init(void) platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); + palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 4ff699c509c0..8d854878547b 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -257,7 +257,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmtt_ts_info, - .irq = OMAP_GPIO_IRQ(6), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -298,6 +297,7 @@ static void __init omap_palmtt_init(void) platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); + palmtt_boardinfo[0].irq = gpio_to_irq(6); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); omap1_usb_init(&palmtt_usb_config); diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index abcbbd339aeb..a2c5abcd7c84 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -224,7 +224,6 @@ static struct spi_board_info __initdata palmz71_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmz71_ts_info, - .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -313,6 +312,7 @@ omap_palmz71_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); + palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO); spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); omap1_usb_init(&palmz71_usb_config); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 659d0f75de2c..37232d04233f 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -44,7 +44,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), - .irq = OMAP_GPIO_IRQ(12), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -52,7 +51,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), - .irq = OMAP_GPIO_IRQ(13), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -60,7 +58,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), - .irq = OMAP_GPIO_IRQ(14), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -68,7 +65,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), - .irq = OMAP_GPIO_IRQ(15), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -80,9 +76,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { static struct platform_device serial_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = voiceblue_ports, - }, }; static int __init ext_uart_init(void) @@ -90,6 +83,11 @@ static int __init ext_uart_init(void) if (!machine_is_voiceblue()) return -ENODEV; + voiceblue_ports[0].irq = gpio_to_irq(12); + voiceblue_ports[1].irq = gpio_to_irq(13); + voiceblue_ports[2].irq = gpio_to_irq(14); + voiceblue_ports[3].irq = gpio_to_irq(15); + serial_device.dev.platform_data = voiceblue_ports; return platform_device_register(&serial_device); } arch_initcall(ext_uart_init); @@ -128,8 +126,6 @@ static struct resource voiceblue_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(8), - .end = OMAP_GPIO_IRQ(8), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -275,6 +271,8 @@ static void __init voiceblue_init(void) irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + voiceblue_smc91x_resources[1].start = gpio_to_irq(8); + voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); |