diff options
Diffstat (limited to 'arch/arm/boot/dts/am335x-baltos-ir5221.dts')
| -rw-r--r-- | arch/arm/boot/dts/am335x-baltos-ir5221.dts | 398 |
1 files changed, 5 insertions, 393 deletions
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 6c667fb35449..227cdfb4df08 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -13,83 +13,19 @@ /dts-v1/; -#include "am33xx.dtsi" -#include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "am335x-baltos.dtsi" / { model = "OnRISC Baltos iR 5221"; - compatible = "vscom,onrisc", "ti,am33xx"; - - cpus { - cpu@0 { - cpu0-supply = <&vdd1_reg>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - vbat: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - }; - - wl12xx_vmmc: fixedregulator@2 { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_gpio>; - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 8 0>; - startup-delay-us = <70000>; - enable-active-high; - }; }; &am33xx_pinmux { - mmc2_pins: pinmux_mmc2_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ - AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ - >; - }; - - wl12xx_gpio: pinmux_wl12xx_gpio { - pinctrl-single,pins = < - AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ - >; - }; - - tps65910_pins: pinmux_tps65910_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ - >; - }; - tca6416_pins: pinmux_tca6416_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ - AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ - >; - }; dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < @@ -98,19 +34,12 @@ >; }; - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ + AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ @@ -122,8 +51,8 @@ pinctrl-single,pins = < AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */ - AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ @@ -133,151 +62,6 @@ >; }; - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ - - - /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) - - /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - nandflash_pins_s0: nandflash_pins_s0 { - pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ - >; - }; -}; - -&elm { - status = "okay"; -}; - -&gpmc { - pinctrl-names = "default"; - pinctrl-0 = <&nandflash_pins_s0>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ - status = "okay"; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - nand-bus-width = <8>; - ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; - - gpmc,device-nand = "true"; - gpmc,device-width = <1>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - elm_id = <&elm>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; }; &uart1 { @@ -287,8 +71,6 @@ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -300,35 +82,11 @@ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@2d { - reg = <0x2d>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio1>; - interrupts = <28 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&tps65910_pins>; - }; - - at24@50 { - compatible = "at24,24c02"; - pagesize = <8>; - reg = <0x50>; - }; - tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -341,14 +99,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - &usb0_phy { status = "okay"; }; @@ -367,108 +117,6 @@ dr_mode = "otg"; }; -&cppi41dma { - status = "okay"; -}; - -#include "tps65910.dtsi" - -&tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; - - ti,en-ck32k-xtal = <1>; - - regulators { - vrtc_reg: regulator@0 { - regulator-always-on; - }; - - vio_reg: regulator@1 { - regulator-always-on; - }; - - vdd1_reg: regulator@2 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; - regulator-boot-on; - regulator-always-on; - }; - - vdd2_reg: regulator@3 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - vdd3_reg: regulator@4 { - regulator-always-on; - }; - - vdig1_reg: regulator@5 { - regulator-always-on; - }; - - vdig2_reg: regulator@6 { - regulator-always-on; - }; - - vpll_reg: regulator@7 { - regulator-always-on; - }; - - vdac_reg: regulator@8 { - regulator-always-on; - }; - - vaux1_reg: regulator@9 { - regulator-always-on; - }; - - vaux2_reg: regulator@10 { - regulator-always-on; - }; - - vaux33_reg: regulator@11 { - regulator-always-on; - }; - - vmmc_reg: regulator@12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; -}; - -&mac { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; - dual_emac = <1>; - - status = "okay"; -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; - - status = "okay"; -}; - &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; phy-mode = "rmii"; @@ -485,42 +133,6 @@ rmii-clock-ext = <1>; }; -&mmc1 { - vmmc-supply = <&vmmc_reg>; - status = "okay"; -}; - -&mmc2 { - status = "okay"; - vmmc-supply = <&wl12xx_vmmc>; - ti,non-removable; - bus-width = <4>; - cap-power-off-card; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; - interrupt-parent = <&gpio3>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; - -&gpio0 { - ti,no-reset-on-init; -}; - &dcan1 { pinctrl-names = "default"; pinctrl-0 = <&dcan1_pins>; |