summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/arm/atmel-aic.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/arm/atmel-aic.txt')
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-aic.txt9
1 files changed, 6 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
index aabca4f83402..19078bf5cca8 100644
--- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt
@@ -4,7 +4,7 @@ Required properties:
- compatible: Should be "atmel,<chip>-aic"
- interrupt-controller: Identifies the node as an interrupt controller.
- interrupt-parent: For single AIC system, it is an empty property.
-- #interrupt-cells: The number of cells to define the interrupts. It sould be 2.
+- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
@@ -14,7 +14,10 @@ Required properties:
8 = active low level-sensitive.
Valid combinations are 1, 2, 3, 4, 8.
Default flag for internal sources should be set to 4 (active high).
+ The third cell is used to specify the irq priority from 0 (lowest) to 7
+ (highest).
- reg: Should contain AIC registers location and length
+- atmel,external-irqs: u32 array of external irqs.
Examples:
/*
@@ -24,7 +27,7 @@ Examples:
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
reg = <0xfffff000 0x200>;
};
@@ -34,5 +37,5 @@ Examples:
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
- interrupts = <21 4>;
+ interrupts = <21 4 5>;
};