usb: xhci-mtk: supports remote wakeup for mt2712 with two xHCI IPs

The old way of usb wakeup only supports platform with single xHCI IP,
such as mt8173, but mt2712 has two xHCI IPs, so rebuild its flow and
supports the new glue layer of usb wakeup on mt2712 which is different
from mt8173.
Due to there is a hardware bug with the LINE STATE wakeup mode on
mt8173 which causes wakeup failure by low speed devices, and also
because IP SLEEP mode can cover all functions of LINE STATE mode,
it is unused in fact, and will not support it later, so remove it at
the same time.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 60 insertions, 117 deletions

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 1cb2a8ba2de5..6da52df11228 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -57,26 +57,21 @@
 /* u2_phy_pll register */
 #define CTRL_U2_FORCE_PLL_STB	BIT(28)
 
-#define PERI_WK_CTRL0		0x400
-#define UWK_CTR0_0P_LS_PE	BIT(8)  /* posedge */
-#define UWK_CTR0_0P_LS_NE	BIT(7)  /* negedge for 0p linestate*/
-#define UWK_CTL1_1P_LS_C(x)	(((x) & 0xf) << 1)
-#define UWK_CTL1_1P_LS_E	BIT(0)
-
-#define PERI_WK_CTRL1		0x404
-#define UWK_CTL1_IS_C(x)	(((x) & 0xf) << 26)
-#define UWK_CTL1_IS_E		BIT(25)
-#define UWK_CTL1_0P_LS_C(x)	(((x) & 0xf) << 21)
-#define UWK_CTL1_0P_LS_E	BIT(20)
-#define UWK_CTL1_IDDIG_C(x)	(((x) & 0xf) << 11)  /* cycle debounce */
-#define UWK_CTL1_IDDIG_E	BIT(10) /* enable debounce */
-#define UWK_CTL1_IDDIG_P	BIT(9)  /* polarity */
-#define UWK_CTL1_0P_LS_P	BIT(7)
-#define UWK_CTL1_IS_P		BIT(6)  /* polarity for ip sleep */
-
-enum ssusb_wakeup_src {
-	SSUSB_WK_IP_SLEEP = 1,
-	SSUSB_WK_LINE_STATE = 2,
+/* usb remote wakeup registers in syscon */
+/* mt8173 etc */
+#define PERI_WK_CTRL1	0x4
+#define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
+#define WC1_IS_EN	BIT(25)
+#define WC1_IS_P	BIT(6)  /* polarity for ip sleep */
+
+/* mt2712 etc */
+#define PERI_SSUSB_SPM_CTRL	0x0
+#define SSC_IP_SLEEP_EN	BIT(4)
+#define SSC_SPM_INT_EN		BIT(1)
+
+enum ssusb_uwk_vers {
+	SSUSB_UWK_V1 = 1,
+	SSUSB_UWK_V2,
 };
 
 static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
@@ -296,112 +291,58 @@ static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
 }
 
 /* only clocks can be turn off for ip-sleep wakeup mode */
-static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk)
+static void usb_wakeup_ip_sleep_set(struct xhci_hcd_mtk *mtk, bool enable)
 {
-	u32 tmp;
-	struct regmap *pericfg = mtk->pericfg;
-
-	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-	tmp &= ~UWK_CTL1_IS_P;
-	tmp &= ~(UWK_CTL1_IS_C(0xf));
-	tmp |= UWK_CTL1_IS_C(0x8);
-	regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-	regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
-
-	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-	dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
-		__func__, tmp);
+	u32 reg, msk, val;
+
+	switch (mtk->uwk_vers) {
+	case SSUSB_UWK_V1:
+		reg = mtk->uwk_reg_base + PERI_WK_CTRL1;
+		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
+		val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
+		break;
+	case SSUSB_UWK_V2:
+		reg = mtk->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
+		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
+		val = enable ? msk : 0;
+		break;
+	default:
+		return;
+	};
+	regmap_update_bits(mtk->uwk, reg, msk, val);
 }
 
-static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk)
+static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
+				struct device_node *dn)
 {
-	u32 tmp;
+	struct of_phandle_args args;
+	int ret;
 
-	regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp);
-	tmp &= ~UWK_CTL1_IS_E;
-	regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp);
-}
+	/* Wakeup function is optional */
+	mtk->uwk_en = of_property_read_bool(dn, "wakeup-source");
+	if (!mtk->uwk_en)
+		return 0;
 
-/*
-* for line-state wakeup mode, phy's power should not power-down
-* and only support cable plug in/out
-*/
-static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk)
-{
-	u32 tmp;
-	struct regmap *pericfg = mtk->pericfg;
-
-	/* line-state of u2-port0 */
-	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-	tmp &= ~UWK_CTL1_0P_LS_P;
-	tmp &= ~(UWK_CTL1_0P_LS_C(0xf));
-	tmp |= UWK_CTL1_0P_LS_C(0x8);
-	regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-	regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E);
-
-	/* line-state of u2-port1 */
-	regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
-	tmp &= ~(UWK_CTL1_1P_LS_C(0xf));
-	tmp |= UWK_CTL1_1P_LS_C(0x8);
-	regmap_write(pericfg, PERI_WK_CTRL0, tmp);
-	regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E);
-}
+	ret = of_parse_phandle_with_fixed_args(dn,
+				"mediatek,syscon-wakeup", 2, 0, &args);
+	if (ret)
+		return ret;
 
-static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
-{
-	u32 tmp;
-	struct regmap *pericfg = mtk->pericfg;
-
-	/* line-state of u2-port0 */
-	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
-	tmp &= ~UWK_CTL1_0P_LS_E;
-	regmap_write(pericfg, PERI_WK_CTRL1, tmp);
-
-	/* line-state of u2-port1 */
-	regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
-	tmp &= ~UWK_CTL1_1P_LS_E;
-	regmap_write(pericfg, PERI_WK_CTRL0, tmp);
-}
+	mtk->uwk_reg_base = args.args[0];
+	mtk->uwk_vers = args.args[1];
+	mtk->uwk = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	dev_info(mtk->dev, "uwk - reg:0x%x, version:%d\n",
+			mtk->uwk_reg_base, mtk->uwk_vers);
 
-static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
-{
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
-		usb_wakeup_ip_sleep_en(mtk);
-	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
-		usb_wakeup_line_state_en(mtk);
-}
+	return PTR_ERR_OR_ZERO(mtk->uwk);
 
-static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
-{
-	if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
-		usb_wakeup_ip_sleep_dis(mtk);
-	else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
-		usb_wakeup_line_state_dis(mtk);
 }
 
-static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
-				struct device_node *dn)
+static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable)
 {
-	struct device *dev = mtk->dev;
-
-	/*
-	* wakeup function is optional, so it is not an error if this property
-	* does not exist, and in such case, no need to get relative
-	* properties anymore.
-	*/
-	of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
-	if (!mtk->wakeup_src)
-		return 0;
-
-	mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
-						"mediatek,syscon-wakeup");
-	if (IS_ERR(mtk->pericfg)) {
-		dev_err(dev, "fail to get pericfg regs\n");
-		return PTR_ERR(mtk->pericfg);
-	}
-
-	return 0;
+	if (mtk->uwk_en)
+		usb_wakeup_ip_sleep_set(mtk, enable);
 }
 
 static int xhci_mtk_setup(struct usb_hcd *hcd);
@@ -583,8 +524,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 			     &mtk->u3p_dis_msk);
 
 	ret = usb_wakeup_of_property_parse(mtk, node);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "failed to parse uwk property\n");
 		return ret;
+	}
 
 	mtk->num_phys = of_count_phandle_with_args(node,
 			"phys", "#phy-cells");
@@ -777,7 +720,7 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev)
 	xhci_mtk_host_disable(mtk);
 	xhci_mtk_phy_power_off(mtk);
 	xhci_mtk_clks_disable(mtk);
-	usb_wakeup_enable(mtk);
+	usb_wakeup_set(mtk, true);
 	return 0;
 }
 
@@ -787,7 +730,7 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
 	struct usb_hcd *hcd = mtk->hcd;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-	usb_wakeup_disable(mtk);
+	usb_wakeup_set(mtk, false);
 	xhci_mtk_clks_enable(mtk);
 	xhci_mtk_phy_power_on(mtk);
 	xhci_mtk_host_enable(mtk);