diff options
| author | Mathieu Malaterre <malat@debian.org> | 2017-12-15 13:46:39 +0100 |
|---|---|---|
| committer | Vladimir Zapolskiy <vz@mleia.com> | 2019-02-03 21:31:23 +0200 |
| commit | 3e3380d0675d5e20b0af067d60cb947a4348bf9b (patch) | |
| tree | dc149bab1c1bfac42d3e10efcc4f6aef50a025e5 /arch/arm/boot/dts/lpc32xx.dtsi | |
| parent | ee65af7f9f425078147107a92e3dc268cad1d591 (diff) | |
ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[vzapolskiy: fixed commit message to pass checkpatch.pl test]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Diffstat (limited to 'arch/arm/boot/dts/lpc32xx.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/lpc32xx.dtsi | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index b7303a4e4236..ed0d6fb20122 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -230,7 +230,7 @@ status = "disabled"; }; - i2s1: i2s@2009C000 { + i2s1: i2s@2009c000 { compatible = "nxp,lpc3220-i2s"; reg = <0x2009C000 0x1000>; }; @@ -273,7 +273,7 @@ status = "disabled"; }; - i2c1: i2c@400A0000 { + i2c1: i2c@400a0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; interrupt-parent = <&sic1>; @@ -284,7 +284,7 @@ clocks = <&clk LPC32XX_CLK_I2C1>; }; - i2c2: i2c@400A8000 { + i2c2: i2c@400a8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; interrupt-parent = <&sic1>; @@ -295,7 +295,7 @@ clocks = <&clk LPC32XX_CLK_I2C2>; }; - mpwm: mpwm@400E8000 { + mpwm: mpwm@400e8000 { compatible = "nxp,lpc3220-motor-pwm"; reg = <0x400E8000 0x78>; status = "disabled"; @@ -394,7 +394,7 @@ #gpio-cells = <3>; /* bank, pin, flags */ }; - timer4: timer@4002C000 { + timer4: timer@4002c000 { compatible = "nxp,lpc3220-timer"; reg = <0x4002C000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; @@ -412,7 +412,7 @@ status = "disabled"; }; - watchdog: watchdog@4003C000 { + watchdog: watchdog@4003c000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; clocks = <&clk LPC32XX_CLK_WDOG>; @@ -451,7 +451,7 @@ status = "disabled"; }; - timer1: timer@4004C000 { + timer1: timer@4004c000 { compatible = "nxp,lpc3220-timer"; reg = <0x4004C000 0x1000>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; @@ -475,7 +475,7 @@ status = "disabled"; }; - pwm1: pwm@4005C000 { + pwm1: pwm@4005c000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; @@ -484,7 +484,7 @@ status = "disabled"; }; - pwm2: pwm@4005C004 { + pwm2: pwm@4005c004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; |