1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
|
// SPDX-License-Identifier: GPL-2.0
/*
* Elida kd35t133 5.5" MIPI-DSI panel driver
* Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH
*
* based on
*
* Rockteck jh057n00900 5.5" MIPI-DSI panel driver
* Copyright (C) Purism SPC 2019
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <video/display_timing.h>
#include <video/mipi_display.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
/* Manufacturer specific Commands send via DSI */
#define KD35T133_CMD_INTERFACEMODECTRL 0xb0
#define KD35T133_CMD_FRAMERATECTRL 0xb1
#define KD35T133_CMD_DISPLAYINVERSIONCTRL 0xb4
#define KD35T133_CMD_DISPLAYFUNCTIONCTRL 0xb6
#define KD35T133_CMD_POWERCONTROL1 0xc0
#define KD35T133_CMD_POWERCONTROL2 0xc1
#define KD35T133_CMD_VCOMCONTROL 0xc5
#define KD35T133_CMD_POSITIVEGAMMA 0xe0
#define KD35T133_CMD_NEGATIVEGAMMA 0xe1
#define KD35T133_CMD_SETIMAGEFUNCTION 0xe9
#define KD35T133_CMD_ADJUSTCONTROL3 0xf7
struct kd35t133 {
struct device *dev;
struct drm_panel panel;
struct gpio_desc *reset_gpio;
struct regulator *vdd;
struct regulator *iovcc;
bool prepared;
};
static inline struct kd35t133 *panel_to_kd35t133(struct drm_panel *panel)
{
return container_of(panel, struct kd35t133, panel);
}
#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
static const u8 b[] = { cmd, seq }; \
int ret; \
ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \
if (ret < 0) \
return ret; \
} while (0)
static int kd35t133_init_sequence(struct kd35t133 *ctx)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
struct device *dev = ctx->dev;
/*
* Init sequence was supplied by the panel vendor with minimal
* documentation.
*/
dsi_dcs_write_seq(dsi, KD35T133_CMD_POSITIVEGAMMA,
0x00, 0x13, 0x18, 0x04, 0x0f, 0x06, 0x3a, 0x56,
0x4d, 0x03, 0x0a, 0x06, 0x30, 0x3e, 0x0f);
dsi_dcs_write_seq(dsi, KD35T133_CMD_NEGATIVEGAMMA,
0x00, 0x13, 0x18, 0x01, 0x11, 0x06, 0x38, 0x34,
0x4d, 0x06, 0x0d, 0x0b, 0x31, 0x37, 0x0f);
dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL1, 0x18, 0x17);
dsi_dcs_write_seq(dsi, KD35T133_CMD_POWERCONTROL2, 0x41);
dsi_dcs_write_seq(dsi, KD35T133_CMD_VCOMCONTROL, 0x00, 0x1a, 0x80);
dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x48);
dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
dsi_dcs_write_seq(dsi, KD35T133_CMD_INTERFACEMODECTRL, 0x00);
dsi_dcs_write_seq(dsi, KD35T133_CMD_FRAMERATECTRL, 0xa0);
dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYINVERSIONCTRL, 0x02);
dsi_dcs_write_seq(dsi, KD35T133_CMD_DISPLAYFUNCTIONCTRL,
0x20, 0x02);
dsi_dcs_write_seq(dsi, KD35T133_CMD_SETIMAGEFUNCTION, 0x00);
dsi_dcs_write_seq(dsi, KD35T133_CMD_ADJUSTCONTROL3,
0xa9, 0x51, 0x2c, 0x82);
mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0);
dev_dbg(dev, "Panel init sequence done\n");
return 0;
}
static int kd35t133_unprepare(struct drm_panel *panel)
{
struct kd35t133 *ctx = panel_to_kd35t133(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
if (!ctx->prepared)
return 0;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
dev_err(ctx->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
return ret;
}
regulator_disable(ctx->iovcc);
regulator_disable(ctx->vdd);
ctx->prepared = false;
return 0;
}
static int kd35t133_prepare(struct drm_panel *panel)
{
struct kd35t133 *ctx = panel_to_kd35t133(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
if (ctx->prepared)
return 0;
dev_dbg(ctx->dev, "Resetting the panel\n");
ret = regulator_enable(ctx->vdd);
if (ret < 0) {
dev_err(ctx->dev, "Failed to enable vdd supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
goto disable_vdd;
}
msleep(20);
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(10, 20);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
msleep(20);
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
goto disable_iovcc;
}
msleep(250);
ret = kd35t133_init_sequence(ctx);
if (ret < 0) {
dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
goto disable_iovcc;
}
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
dev_err(ctx->dev, "Failed to set display on: %d\n", ret);
goto disable_iovcc;
}
msleep(50);
ctx->prepared = true;
return 0;
disable_iovcc:
regulator_disable(ctx->iovcc);
disable_vdd:
regulator_disable(ctx->vdd);
return ret;
}
static const struct drm_display_mode default_mode = {
.hdisplay = 320,
.hsync_start = 320 + 130,
.hsync_end = 320 + 130 + 4,
.htotal = 320 + 130 + 4 + 130,
.vdisplay = 480,
.vsync_start = 480 + 2,
.vsync_end = 480 + 2 + 1,
.vtotal = 480 + 2 + 1 + 2,
.clock = 17000,
.width_mm = 42,
.height_mm = 82,
};
static int kd35t133_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct kd35t133 *ctx = panel_to_kd35t133(panel);
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
}
static const struct drm_panel_funcs kd35t133_funcs = {
.unprepare = kd35t133_unprepare,
.prepare = kd35t133_prepare,
.get_modes = kd35t133_get_modes,
};
static int kd35t133_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct kd35t133 *ctx;
int ret;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
ctx->vdd = devm_regulator_get(dev, "vdd");
if (IS_ERR(ctx->vdd)) {
ret = PTR_ERR(ctx->vdd);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request vdd regulator: %d\n", ret);
return ret;
}
ctx->iovcc = devm_regulator_get(dev, "iovcc");
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
dsi->lanes = 1;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET |
MIPI_DSI_CLOCK_NON_CONTINUOUS;
drm_panel_init(&ctx->panel, &dsi->dev, &kd35t133_funcs,
DRM_MODE_CONNECTOR_DSI);
ret = drm_panel_of_backlight(&ctx->panel);
if (ret)
return ret;
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static void kd35t133_shutdown(struct mipi_dsi_device *dsi)
{
struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
}
static int kd35t133_remove(struct mipi_dsi_device *dsi)
{
struct kd35t133 *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
kd35t133_shutdown(dsi);
ret = mipi_dsi_detach(dsi);
if (ret < 0)
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
return 0;
}
static const struct of_device_id kd35t133_of_match[] = {
{ .compatible = "elida,kd35t133" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, kd35t133_of_match);
static struct mipi_dsi_driver kd35t133_driver = {
.driver = {
.name = "panel-elida-kd35t133",
.of_match_table = kd35t133_of_match,
},
.probe = kd35t133_probe,
.remove = kd35t133_remove,
.shutdown = kd35t133_shutdown,
};
module_mipi_dsi_driver(kd35t133_driver);
MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
MODULE_DESCRIPTION("DRM driver for Elida kd35t133 MIPI DSI panel");
MODULE_LICENSE("GPL v2");
|