1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
Low Power Island (LPI) TLMM block
maintainers:
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
description: |
This binding describes the Top Level Mode Multiplexer block found in the
LPASS LPI IP on most Qualcomm SoCs
properties:
compatible:
const: qcom,sm8250-lpass-lpi-pinctrl
reg:
minItems: 2
maxItems: 2
clocks:
items:
- description: LPASS Core voting clock
- description: LPASS Audio voting clock
clock-names:
items:
- const: core
- const: audio
gpio-controller: true
'#gpio-cells':
description: Specifying the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h
const: 2
gpio-ranges:
maxItems: 1
#PIN CONFIGURATION NODES
patternProperties:
'-pins$':
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9])$"
minItems: 1
maxItems: 14
function:
enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
dmic3_data, i2s2_data ]
description:
Specify the alternative function to be configured for the specified
pins.
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
default: 2
description:
Selects the drive strength for the specified pins, in mA.
slew-rate:
enum: [0, 1, 2, 3]
default: 0
description: |
0: No adjustments
1: Higher Slew rate (faster edges)
2: Lower Slew rate (slower edges)
3: Reserved (No adjustments)
bias-pull-down: true
bias-pull-up: true
bias-disable: true
output-high: true
output-low: true
required:
- pins
- function
additionalProperties: false
allOf:
- $ref: "pinctrl.yaml#"
required:
- compatible
- reg
- clocks
- clock-names
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/sound/qcom,q6afe.h>
lpi_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8250-lpass-lpi-pinctrl";
reg = <0x33c0000 0x20000>,
<0x3550000 0x10000>;
clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&lpi_tlmm 0 0 14>;
};
|
