1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
* STMicroelectronics STM32 lcd-tft display controller
- ltdc: lcd-tft display controller host
Required properties:
- compatible: "st,stm32-ltdc"
- reg: Physical base address of the IP registers and length of memory mapped region.
- clocks: A list of phandle + clock-specifier pairs, one for each
entry in 'clock-names'.
- clock-names: A list of clock names. For ltdc it should contain:
- "lcd" for the clock feeding the output pixel clock & IP clock.
- resets: reset to be used by the device (defined by use of RCC macro).
Required nodes:
- Video port for RGB output.
* STMicroelectronics STM32 DSI controller specific extensions to Synopsys
DesignWare MIPI DSI host controller
The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI
DSI host controller. For all mandatory properties & nodes, please refer
to the related documentation in [5].
Mandatory properties specific to STM32 DSI:
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.
- compatible: "st,stm32-dsi".
- clock-names:
- phy pll reference clock string name, must be "ref".
- resets: see [5].
- reset-names: see [5].
Mandatory nodes specific to STM32 DSI:
- ports: A node containing DSI input & output port nodes with endpoint
definitions as documented in [3] & [4].
- port@0: DSI input port node, connected to the ltdc rgb output port.
- port@1: DSI output port node, connected to a panel or a bridge input port.
- panel or bridge node: A node containing the panel or bridge description as
documented in [6].
- port: panel or bridge port node, connected to the DSI output port (port@1).
Note: You can find more documentation in the following references
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/reset/reset.txt
[3] Documentation/devicetree/bindings/media/video-interfaces.txt
[4] Documentation/devicetree/bindings/graph.txt
[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
Example 1: RGB panel
/ {
...
soc {
...
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
interrupts = <88>, <89>;
resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
clocks = <&rcc 1 CLK_LCD>;
clock-names = "lcd";
port {
ltdc_out_rgb: endpoint {
};
};
};
};
};
Example 2: DSI panel
/ {
...
soc {
...
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
interrupts = <88>, <89>;
resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
clocks = <&rcc 1 CLK_LCD>;
clock-names = "lcd";
port {
ltdc_out_dsi: endpoint {
remote-endpoint = <&dsi_in>;
};
};
};
dsi: dsi@40016c00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32-dsi";
reg = <0x40016c00 0x800>;
clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
clock-names = "ref", "pclk";
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
reset-names = "apb";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi_in: endpoint {
remote-endpoint = <<dc_out_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&dsi_in_panel>;
};
};
};
panel-dsi@0 {
reg = <0>; /* dsi virtual channel (0..3) */
compatible = ...;
enable-gpios = ...;
port {
dsi_in_panel: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
};
};
};
|
