1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
Binding for a ST divider and multiplexer clock driver.
This binding uses the common clock binding[1].
Base address is located to the parent node. See clock binding[2]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
Required properties:
- compatible : shall be:
"st,clkgena-divmux-c65-hs", "st,clkgena-divmux"
"st,clkgena-divmux-c65-ls", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf0", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf1", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf2", "st,clkgena-divmux"
"st,clkgena-divmux-c32-odf3", "st,clkgena-divmux"
- #clock-cells : From common clock binding; shall be set to 1.
- clocks : From common clock binding
- clock-output-names : From common clock binding.
Example:
clockgenA@fd345000 {
reg = <0xfd345000 0xb50>;
CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
#clock-cells = <1>;
compatible = "st,clkgena-divmux-c32-odf1",
"st,clkgena-divmux";
clocks = <&CLK_M_A1_OSC_PREDIV>,
<&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
<&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
clock-output-names = "CLK_M_RX_ICN_TS",
"CLK_M_RX_ICN_VDP_0",
"", /* Unused */
"CLK_M_PRV_T1_BUS",
"CLK_M_ICN_REG_12",
"CLK_M_ICN_REG_10",
"", /* Unused */
"CLK_M_ICN_ST231";
};
};
|
