/* * Driver for Microchip USB251xB USB 2.0 Hi-Speed Hub Controller * Configuration via SMBus. * * Copyright (c) 2017 SKIDATA AG * * This work is based on the USB3503 driver by Dongjin Kim and * a not-accepted patch by Fabien Lahoudere, see: * https://patchwork.kernel.org/patch/9257715/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include /* Internal Register Set Addresses & Default Values acc. to DS00001692C */ #define USB251XB_ADDR_VENDOR_ID_LSB 0x00 #define USB251XB_ADDR_VENDOR_ID_MSB 0x01 #define USB251XB_DEF_VENDOR_ID 0x0424 #define USB251XB_ADDR_PRODUCT_ID_LSB 0x02 #define USB251XB_ADDR_PRODUCT_ID_MSB 0x03 #define USB251XB_DEF_PRODUCT_ID_12 0x2512 /* USB2512B/12Bi */ #define USB251XB_DEF_PRODUCT_ID_13 0x2513 /* USB2513B/13Bi */ #define USB251XB_DEF_PRODUCT_ID_14 0x2514 /* USB2514B/14Bi */ #define USB251XB_DEF_PRODUCT_ID_17 0x2517 /* USB2517/17i */ #define USB251XB_ADDR_DEVICE_ID_LSB 0x04 #define USB251XB_ADDR_DEVICE_ID_MSB 0x05 #define USB251XB_DEF_DEVICE_ID 0x0BB3 #define USB251XB_ADDR_CONFIG_DATA_1 0x06 #define USB251XB_DEF_CONFIG_DATA_1 0x9B #define USB251XB_ADDR_CONFIG_DATA_2 0x07 #define USB251XB_DEF_CONFIG_DATA_2 0x20 #define USB251XB_ADDR_CONFIG_DATA_3 0x08 #define USB251XB_DEF_CONFIG_DATA_3 0x02 #define USB251XB_ADDR_NON_REMOVABLE_DEVICES 0x09 #define USB251XB_DEF_NON_REMOVABLE_DEVICES 0x00 #define USB251XB_ADDR_PORT_DISABLE_SELF 0x0A #define USB251XB_DEF_PORT_DISABLE_SELF 0x00 #define USB251XB_ADDR_PORT_DISABLE_BUS 0x0B #define USB251XB_DEF_PORT_DISABLE_BUS 0x00 #define USB251XB_ADDR_MAX_POWER_SELF 0x0C #define USB251XB_DEF_MAX_POWER_SELF 0x01 #define USB251XB_ADDR_MAX_POWER_BUS 0x0D #define USB251XB_DEF_MAX_POWER_BUS 0x32 #define USB251XB_ADDR_MAX_CURRENT_SELF 0x0E #define USB251XB_DEF_MAX_CURRENT_SELF 0x01 #define USB251XB_ADDR_MAX_CURRENT_BUS 0x0F #define USB251XB_DEF_MAX_CURRENT_BUS 0x32 #define USB251XB_ADDR_POWER_ON_TIME 0x10 #define USB251XB_DEF_POWER_ON_TIME 0x32 #define USB251XB_ADDR_LANGUAGE_ID_HIGH 0x11 #define USB251XB_ADDR_LANGUAGE_ID_LOW 0x12 #define USB251XB_DEF_LANGUAGE_ID 0x0000 #define USB251XB_STRING_BUFSIZE 62 #define USB251XB_ADDR_MANUFACTURER_STRING_LEN 0x13 #define USB251XB_ADDR_MANUFACTURER_STRING 0x16 #define USB251XB_DEF_MANUFACTURER_STRING "Microchip" #define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14 #define USB251XB_ADDR_PRODUCT_STRING 0x54 #define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi/7i" #define USB251XB_ADDR_SERIAL_STRING_LEN 0x15 #define USB251XB_ADDR_SERIAL_STRING 0x92 #define USB251XB_DEF_SERIAL_STRING "" #define USB251XB_ADDR_BATTERY_CHARGING_ENABLE 0xD0 #define USB251XB_DEF_BATTERY_CHARGING_ENABLE 0x00 #define USB251XB_ADDR_BOOST_UP 0xF6 #define USB251XB_DEF_BOOST_UP 0x00 #define USB251XB_ADDR_BOOST_57 0xF7 #define USB251XB_DEF_BOOST_57 0x00 #define USB251XB_ADDR_BOOST_14 0xF8 #define USB251XB_DEF_BOOST_14 0x00 #define USB251XB_ADDR_PORT_SWAP 0xFA #define USB251XB_DEF_PORT_SWAP 0x00 #define USB251XB_ADDR_PORT_MAP_12 0xFB #define USB251XB_DEF_PORT_MAP_12 0x00 #define USB251XB_ADDR_PORT_MAP_34 0xFC #define USB251XB_DEF_PORT_MAP_34 0x00 /* USB251{3B/i,4B/i,7/i} only */ #define USB251XB_ADDR_PORT_MAP_56 0xFD #define USB251XB_DEF_PORT_MAP_56 0x00 /* USB2517/i only */ #define USB251XB_ADDR_PORT_MAP_7 0xFE #define USB251XB_DEF_PORT_MAP_7 0x00 /* USB2517/i only */ #define USB251XB_ADDR_STATUS_COMMAND 0xFF #define USB251XB_STATUS_COMMAND_SMBUS_DOWN 0x04 #define USB251XB_STATUS_COMMAND_RESET 0x02 #define USB251XB_STATUS_COMMAND_ATTACH 0x01 #define USB251XB_I2C_REG_SZ 0x100 #define USB251XB_I2C_WRITE_SZ 0x10 #define DRIVER_NAME "usb251xb" #define DRIVER_DESC "Microchip USB 2.0 Hi-Speed Hub Controller" struct usb251xb { struct device *dev; struct i2c_client *i2c; u8 skip_config; struct gpio_desc *gpio_reset; u16 vendor_id; u16 product_id; u16 device_id; u8 conf_data1; u8 conf_data2; u8 conf_data3; u8 non_rem_dev; u8 port_disable_sp; u8 port_disable_bp; u8 max_power_sp; u8 max_power_bp; u8 max_current_sp; u8 max_current_bp; u8 power_on_time; u16 lang_id; u8 manufacturer_len; u8 product_len; u8 serial_len; char manufacturer[USB251XB_STRING_BUFSIZE]; char product[USB251XB_STRING_BUFSIZE]; char serial[USB251XB_STRING_BUFSIZE]; u8 bat_charge_en; u8 boost_up; u8 boost_57; u8 boost_14; u8 port_swap; u8 port_map12; u8 port_map34; u8 port_map56; u8 port_map7; u8 status; }; struct usb251xb_data { u16 product_id; u8 port_cnt; bool led_support; bool bat_support; char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */ }; static const struct usb251xb_data usb2512b_data = { .product_id = 0x2512, .port_cnt = 2, .led_support = false, .bat_support = true, .product_str = "USB2512B", }; static const struct usb251xb_data usb2512bi_data = { .product_id = 0x2512, .port_cnt = 2, .led_support = false, .bat_support = true, .product_str = "USB2512Bi", }; static const struct usb251xb_data usb2513b_data = { .product_id = 0x2513, .port_cnt = 3, .led_support = false, .bat_support = true, .product_str = "USB2513B", }; static const struct usb251xb_data usb2513bi_data = { .product_id = 0x2513, .port_cnt = 3, .led_support = false, .bat_support = true, .product_str = "USB2513Bi", }; static const struct usb251xb_data usb2514b_data = { .product_id = 0x2514, .port_cnt = 4, .led_support = false, .bat_support = true, .product_str = "USB2514B", }; static const struct usb251xb_data usb2514bi_data = { .product_id = 0x2514, .port_cnt = 4, .led_support = false, .bat_support = true, .product_str = "USB2514Bi", }; static const struct usb251xb_data usb2517_data = { .product_id = 0x2517, .port_cnt = 7, .led_support = true, .bat_support = false, .product_str = "USB2517", }; static const struct usb251xb_data usb2517i_data = { .product_id = 0x2517, .port_cnt = 7, .led_support = true, .bat_support = false, .product_str = "USB2517i", }; static void usb251xb_reset(struct usb251xb *hub, int state) { if (!hub->gpio_reset) return; gpiod_set_value_cansleep(hub->gpio_reset, state); /* wait for hub recovery/stabilization */ if (!state) usleep_range(500, 750); /* >=500us at power on */ else usleep_range(1, 10); /* >=1us at power down */ } static int usb251xb_connect(struct usb251xb *hub) { struct device *dev = hub->dev; int err, i; char i2c_wb[USB251XB_I2C_REG_SZ]; memset(i2c_wb, 0, USB251XB_I2C_REG_SZ); if (hub->skip_config) { dev_info(dev, "Skip hub configuration, only attach.\n"); i2c_wb[0] = 0x01; i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH; usb251xb_reset(hub, 0); err = i2c_smbus_write_i2c_block_data(hub->i2c, USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb); if (err) { dev_err(dev, "attaching hub failed: %d\n", err); return err; } return 0; } i2c_wb[USB251XB_ADDR_VENDOR_ID_MSB] = (hub->vendor_id >> 8) & 0xFF; i2c_wb[USB251XB_ADDR_VENDOR_ID_LSB] = hub->vendor_id & 0xFF; i2c_wb[USB251XB_ADDR_PRODUCT_ID_MSB] = (hub->product_id >> 8) & 0xFF; i2c_wb[USB251XB_ADDR_PRODUCT_ID_LSB] = hub->product_id & 0xFF; i2c_wb[USB251XB_ADDR_DEVICE_ID_MSB] = (hub->device_id >> 8) & 0xFF; i2c_wb[USB251XB_ADDR_DEVICE_ID_LSB] = hub->device_id & 0xFF; i2c_wb[USB251XB_ADDR_CONFIG_DATA_1] = hub->conf_data1; i2c_wb[USB251XB_ADDR_CONFIG_DATA_2] = hub->conf_data2; i2c_wb[USB251XB_ADDR_CONFIG_DATA_3] = hub->conf_data3; i2c_wb[USB251XB_ADDR_NON_REMOVABLE_DEVICES] = hub->non_rem_dev; i2c_wb[USB251XB_ADDR_PORT_DISABLE_SELF] = hub->port_disable_sp; i2c_wb[USB251XB_ADDR_PORT_DISABLE_BUS] = hub->port_disable_bp; i2c_wb[USB251XB_ADDR_MAX_POWER_SELF] = hub->max_power_sp; i2c_wb[USB251XB_ADDR_MAX_POWER_BUS] = hub->max_power_bp; i2c_wb[USB251XB_ADDR_MAX_CURRENT_SELF] = hub->max_current_sp; i2c_wb[USB251XB_ADDR_MAX_CURRENT_BUS] = hub->max_current_bp; i2c_wb[USB251XB_ADDR_POWER_ON_TIME] = hub->power_on_time; i2c_wb[USB251XB_ADDR_LANGUAGE_ID_HIGH] = (hub->lang_id >> 8) & 0xFF; i2c_wb[USB251XB_ADDR_LANGUAGE_ID_LOW] = hub->lang_id & 0xFF; i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING_LEN] = hub->manufacturer_len; i2c_wb[USB251XB_ADDR_PRODUCT_STRING_LEN] = hub->product_len; i2c_wb[USB251XB_ADDR_SERIAL_STRING_LEN] = hub->serial_len; memcpy(&i2c_wb[USB251XB_ADDR_MANUFACTURER_STRING], hub->manufacturer, USB251XB_STRING_BUFSIZE); memcpy(&i2c_wb[USB251XB_ADDR_SERIAL_STRING], hub->serial, USB251XB_STRING_BUFSIZE); memcpy(&i2c_wb[USB251XB_ADDR_PRODUCT_STRING], hub->product, USB251XB_STRING_BUFSIZE); i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en; i2c_wb[USB251XB_ADDR_BOOST_UP] = hub->boost_up; i2c_wb[USB251XB_ADDR_BOOST_57] = hub->boost_57; i2c_wb[USB251XB_ADDR_BOOST_14] = hub->boost_14; i2c_wb[USB251XB_ADDR_PORT_SWAP] = hub->port_swap; i2c_wb[USB251XB_ADDR_PORT_MAP_12] = hub->port_map12; i2c_wb[USB251XB_ADDR_PORT_MAP_34] = hub->port_map34; i2c_wb[USB251XB_ADDR_PORT_MAP_56] = hub->port_map56; i2c_wb[USB251XB_ADDR_PORT_MAP_7] = hub->port_map7; i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH; usb251xb_reset(hub, 0); /* write registers */ for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) { int offset = i * USB251XB_I2C_WRITE_SZ; char wbuf[USB251XB_I2C_WRITE_SZ + 1]; /* The first data byte transferred tells the hub how many data * bytes will follow (byte count). */ wbuf[0] = USB251XB_I2C_WRITE_SZ; memcpy(&wbuf[1], &i2c_wb[offset], USB251XB_I2C_WRITE_SZ); dev_dbg(dev, "writing %d byte block %d to 0x%02X\n", USB251XB_I2C_WRITE_SZ, i, offset); err = i2c_smbus_write_i2c_block_data(hub->i2c, offset, USB251XB_I2C_WRITE_SZ + 1, wbuf); if (err) goto out_err; } dev_info(dev, "Hub configuration was successful.\n"); return 0; out_err: dev_err(dev, "configuring block %d failed: %d\n", i, err); return err; } #ifdef CONFIG_OF static int usb251xb_get_ofdata(struct usb251xb *hub, struct usb251xb_data *data) { struct device *dev = hub->dev; struct device_node *np = dev->of_node; int len, err, i; u32 property_u32 = 0; const u32 *cproperty_u32; const char *cproperty_char; char str[USB251XB_STRING_BUFSIZE / 2]; if (!np) { dev_err(dev, "failed to get ofdata\n"); return -ENODEV; } if (of_get_property(np, "skip-config", NULL)) hub->skip_config = 1; else hub->skip_config = 0; hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (PTR_ERR(hub->gpio_reset) == -EPROBE_DEFER) { return -EPROBE_DEFER; } else if (IS_ERR(hub->gpio_reset)) { err = PTR_ERR(hub->gpio_reset); dev_err(dev, "unable to request GPIO reset pin (%d)\n", err); return err; } if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1)) hub->vendor_id = USB251XB_DEF_VENDOR_ID; if (of_property_read_u16_array(np, "product-id", &hub->product_id, 1)) hub->product_id = data->product_id; if (of_property_read_u16_array(np, "device-id", &hub->device_id, 1)) hub->device_id = USB251XB_DEF_DEVICE_ID; hub->conf_data1 = USB251XB_DEF_CONFIG_DATA_1; if (of_get_property(np, "self-powered", NULL)) { hub->conf_data1 |= BIT(7); /* Configure Over-Current sens when self-powered */ hub->conf_data1 &= ~BIT(2); if (of_get_property(np, "ganged-sensing", NULL)) hub->conf_data1 &= ~BIT(1); else if (of_get_property(np, "individual-sensing", NULL)) hub->conf_data1 |= BIT(1); } else if (of_get_property(np, "bus-powered", NULL)) { hub->conf_data1 &= ~BIT(7); /* Disable Over-Current sense when bus-powered */ hub->conf_data1 |= BIT(2); } if (of_get_property(np, "disable-hi-speed", NULL)) hub->conf_data1 |= BIT(5); if (of_get_property(np, "multi-tt", NULL)) hub->conf_data1 |= BIT(4); else if (of_get_property(np, "single-tt", NULL)) hub->conf_data1 &= ~BIT(4); if (of_get_property(np, "disable-eop", NULL)) hub->conf_data1 |= BIT(3); if (of_get_property(np, "individual-port-switching", NULL)) hub->conf_data1 |= BIT(0); else if (of_get_property(np, "ganged-port-switching", NULL)) hub->conf_data1 &= ~BIT(0); hub->conf_data2 = USB251XB_DEF_CONFIG_DATA_2; if (of_get_property(np, "dynamic-power-switching", NULL)) hub->conf_data2 |= BIT(7); if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) { if (property_u32 == 100) { /* 100 us*/ hub->conf_data2 &= ~BIT(5); hub->conf_data2 &= ~BIT(4); } else if (property_u32 == 4000) { /* 4 ms */ hub->conf_data2 &= ~BIT(5); hub->conf_data2 |= BIT(4); } else if (property_u32 == 16000) { /* 16 ms */ hub->conf_data2 |= BIT(5); hub->conf_data2 |= BIT(4); } else { /* 8 ms (DEFAULT) */ hub->conf_data2 |= BIT(5); hub->conf_data2 &= ~BIT(4); } } if (of_get_property(np, "compound-device", NULL)) hub->conf_data2 |= BIT(3); hub->conf_data3 = USB251XB_DEF_CONFIG_DATA_3; if (of_get_property(np, "port-mapping-mode", NULL)) hub->conf_data3 |= BIT(3); if (data->led_support && of_get_property(np, "led-usb-mode", NULL)) hub->conf_data3 &= ~BIT(1); if (of_get_property(np, "string-support", NULL)) hub->conf_data3 |= BIT(0); hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES; cproperty_u32 = of_get_property(np, "non-removable-ports", &len); if (cproperty_u32 && (len / sizeof(u32)) > 0) { for (i = 0; i < len / sizeof(u32); i++) { u32 port = be32_to_cpu(cproperty_u32[i]); if ((port >= 1) && (port <= data->port_cnt)) hub->non_rem_dev |= BIT(port); else dev_warn(dev, "NRD port %u doesn't exist\n", port); } } hub->port_disable_sp = USB251XB_DEF_PORT_DISABLE_SELF; cproperty_u32 = of_get_property(np, "sp-disabled-ports", &len); if (cproperty_u32 && (len / sizeof(u32)) > 0) { for (i = 0; i < len / sizeof(u32); i++) { u32 port = be32_to_cpu(cproperty_u32[i]); if ((port >= 1) && (port <= data->port_cnt)) hub->port_disable_sp |= BIT(port); else dev_warn(dev, "PDS port %u doesn't exist\n", port); } } hub->port_disable_bp = USB251XB_DEF_PORT_DISABLE_BUS; cproperty_u32 = of_get_property(np, "bp-disabled-ports", &len); if (cproperty_u32 && (len / sizeof(u32)) > 0) { for (i = 0; i < len / sizeof(u32); i++) { u32 port = be32_to_cpu(cproperty_u32[i]); if ((port >= 1) && (port <= data->port_cnt)) hub->port_disable_bp |= BIT(port); else dev_warn(dev, "PDB port %u doesn't exist\n", port); } } hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF; if (!of_property_read_u32(np, "sp-max-total-current-microamp", &property_u32)) hub->max_power_sp = min_t(u8, property_u32 / 2000, 50); hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS; if (!of_property_read_u32(np, "bp-max-total-current-microamp", &property_u32)) hub->max_power_bp = min_t(u8, property_u32 / 2000, 255); hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF; if (!of_property_read_u32(np, "sp-max-removable-current-microamp", &property_u32)) hub->max_current_sp = min_t(u8, property_u32 / 2000, 50); hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS; if (!of_property_read_u32(np, "bp-max-removable-current-microamp", &property_u32)) hub->max_current_bp = min_t(u8, property_u32 / 2000, 255); hub->power_on_time = USB251XB_DEF_POWER_ON_TIME; if (!of_property_read_u32(np, "power-on-time-ms", &property_u32)) hub->power_on_time = min_t(u8, property_u32 / 2, 255); if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1)) hub->lang_id = USB251XB_DEF_LANGUAGE_ID; cproperty_char = of_get_property(np, "manufacturer", NULL); strlcpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING, sizeof(str)); hub->manufacturer_len = strlen(str) & 0xFF; memset(hub->manufacturer, 0, USB251XB_STRING_BUFSIZE); len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN, (wchar_t *)hub->manufacturer, USB251XB_STRING_BUFSIZE); cproperty_char = of_get_property(np, "product", NULL); strlcpy(str, cproperty_char ? : data->product_str, sizeof(str)); hub->product_len = strlen(str) & 0xFF; memset(hub->product, 0, USB251XB_STRING_BUFSIZE); len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN, (wchar_t *)hub->product, USB251XB_STRING_BUFSIZE); cproperty_char = of_get_property(np, "serial", NULL); strlcpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING, sizeof(str)); hub->serial_len = strlen(str) & 0xFF; memset(hub->serial, 0, USB251XB_STRING_BUFSIZE); len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); len = utf8s_to_utf16s(str, len, UTF16_LITTLE_ENDIAN, (wchar_t *)hub->serial, USB251XB_STRING_BUFSIZE); /* The following parameters are currently not exposed to devicetree, but * may be as soon as needed. */ hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE; hub->boost_up = USB251XB_DEF_BOOST_UP; hub->boost_57 = USB251XB_DEF_BOOST_57; hub->boost_14 = USB251XB_DEF_BOOST_14; hub->port_swap = USB251XB_DEF_PORT_SWAP; hub->port_map12 = USB251XB_DEF_PORT_MAP_12; hub->port_map34 = USB251XB_DEF_PORT_MAP_34; hub->port_map56 = USB251XB_DEF_PORT_MAP_56; hub->port_map7 = USB251XB_DEF_PORT_MAP_7; return 0; } static const struct of_device_id usb251xb_of_match[] = { { .compatible = "microchip,usb2512b", .data = &usb2512b_data, }, { .compatible = "microchip,usb2512bi", .data = &usb2512bi_data, }, { .compatible = "microchip,usb2513b", .data = &usb2513b_data, }, { .compatible = "microchip,usb2513bi", .data = &usb2513bi_data, }, { .compatible = "microchip,usb2514b", .data = &usb2514b_data, }, { .compatible = "microchip,usb2514bi", .data = &usb2514bi_data, }, { .compatible = "microchip,usb2517", .data = &usb2517_data, }, { .compatible = "microchip,usb2517i", .data = &usb2517i_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, usb251xb_of_match); #else /* CONFIG_OF */ static int usb251xb_get_ofdata(struct usb251xb *hub, struct usb251xb_data *data) { return 0; } #endif /* CONFIG_OF */ static int usb251xb_probe(struct usb251xb *hub) { struct device *dev = hub->dev; struct device_node *np = dev->of_node; const struct of_device_id *of_id = of_match_device(usb251xb_of_match, dev); int err; if (np) { err = usb251xb_get_ofdata(hub, (struct usb251xb_data *)of_id->data); if (err) { dev_err(dev, "failed to get ofdata: %d\n", err); return err; } } err = usb251xb_connect(hub); if (err) { dev_err(dev, "Failed to connect hub (%d)\n", err); return err; } dev_info(dev, "Hub probed successfully\n"); return 0; } static int usb251xb_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct usb251xb *hub; hub = devm_kzalloc(&i2c->dev, sizeof(struct usb251xb), GFP_KERNEL); if (!hub) return -ENOMEM; i2c_set_clientdata(i2c, hub); hub->dev = &i2c->dev; hub->i2c = i2c; return usb251xb_probe(hub); } static const struct i2c_device_id usb251xb_id[] = { { "usb2512b", 0 }, { "usb2512bi", 0 }, { "usb2513b", 0 }, { "usb2513bi", 0 }, { "usb2514b", 0 }, { "usb2514bi", 0 }, { "usb2517", 0 }, { "usb2517i", 0 }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, usb251xb_id); static struct i2c_driver usb251xb_i2c_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(usb251xb_of_match), }, .probe = usb251xb_i2c_probe, .id_table = usb251xb_id, }; module_i2c_driver(usb251xb_i2c_driver); MODULE_AUTHOR("Richard Leitner "); MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver"); MODULE_LICENSE("GPL");