From 2e589fdc35c281fe1b1abe8a70004022ca504cf7 Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Wed, 1 Mar 2017 10:11:07 +0100 Subject: ASoC: rockchip: Enable 192khz in hw_params operation As the sampling frequency is supported by es8328 in slave mode, add support for it in the corresponding operation. Signed-off-by: Romain Perier Signed-off-by: Mark Brown --- sound/soc/rockchip/rk3288_hdmi_analog.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/rockchip/rk3288_hdmi_analog.c b/sound/soc/rockchip/rk3288_hdmi_analog.c index b60abf322ce1..dbc53e48c52c 100644 --- a/sound/soc/rockchip/rk3288_hdmi_analog.c +++ b/sound/soc/rockchip/rk3288_hdmi_analog.c @@ -93,6 +93,9 @@ static int rk_hw_params(struct snd_pcm_substream *substream, case 96000: mclk = 12288000; break; + case 192000: + mclk = 24576000; + break; case 11025: case 22050: case 44100: -- cgit v1.2.3 From 9ba2da5f5d18daaa365ab5426b05e16f1d114786 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 4 Apr 2017 15:26:25 -0400 Subject: ASoc: rt5645: Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 After this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: of:N*T*Crealtek,rt5650C* alias: of:N*T*Crealtek,rt5650 alias: of:N*T*Crealtek,rt5645C* alias: of:N*T*Crealtek,rt5645 alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 Signed-off-by: Javier Martinez Canillas Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 10c2a564a715..f8550ef2261b 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3542,6 +3542,15 @@ static const struct i2c_device_id rt5645_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id); +#ifdef CONFIG_OF +static const struct of_device_id rt5645_of_match[] = { + { .compatible = "realtek,rt5645", }, + { .compatible = "realtek,rt5650", }, + { } +}; +MODULE_DEVICE_TABLE(of, rt5645_of_match); +#endif + #ifdef CONFIG_ACPI static const struct acpi_device_id rt5645_acpi_match[] = { { "10EC5645", 0 }, @@ -3901,6 +3910,7 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c) static struct i2c_driver rt5645_i2c_driver = { .driver = { .name = "rt5645", + .of_match_table = of_match_ptr(rt5645_of_match), .acpi_match_table = ACPI_PTR(rt5645_acpi_match), }, .probe = rt5645_i2c_probe, -- cgit v1.2.3 From 7b87463edf3e2c16d72eeea3d1cf3c12bb5487c6 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 4 Apr 2017 15:26:30 -0400 Subject: ASoC: rt5677: Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo sound/soc/codecs/snd-soc-rt5677.ko | grep alias alias: i2c:RT5677CE:00 alias: i2c:rt5676 alias: i2c:rt5677 After this patch: $ modinfo sound/soc/codecs/snd-soc-rt5677.ko | grep alias alias: of:N*T*Crealtek,rt5677C* alias: of:N*T*Crealtek,rt5677 alias: i2c:RT5677CE:00 alias: i2c:rt5676 alias: i2c:rt5677 Signed-off-by: Javier Martinez Canillas Signed-off-by: Mark Brown --- sound/soc/codecs/rt5677.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index abc802a5a479..65ac4518ad06 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -5035,6 +5035,12 @@ static const struct i2c_device_id rt5677_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id); +static const struct of_device_id rt5677_of_match[] = { + { .compatible = "realtek,rt5677", }, + { } +}; +MODULE_DEVICE_TABLE(of, rt5677_of_match); + static const struct acpi_gpio_params plug_det_gpio = { RT5677_GPIO_PLUG_DET, 0, false }; static const struct acpi_gpio_params mic_present_gpio = { RT5677_GPIO_MIC_PRESENT_L, 0, false }; static const struct acpi_gpio_params headphone_enable_gpio = { RT5677_GPIO_HP_AMP_SHDN_L, 0, false }; @@ -5294,6 +5300,7 @@ static int rt5677_i2c_remove(struct i2c_client *i2c) static struct i2c_driver rt5677_i2c_driver = { .driver = { .name = "rt5677", + .of_match_table = rt5677_of_match, }, .probe = rt5677_i2c_probe, .remove = rt5677_i2c_remove, -- cgit v1.2.3 From d0c02e14e48be94dd312ff6edffab9f9e6acd480 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 14 Apr 2017 09:40:30 -0700 Subject: ASoC: rt5514: Mark rt5514_i2c_driver as static There's no reason for rt5514_i2c_driver to be non-static. Signed-off-by: Douglas Anderson Signed-off-by: Mark Brown --- sound/soc/codecs/rt5514.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/soc') diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index b281a46d769d..481e77763fe4 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -1149,7 +1149,7 @@ static int rt5514_i2c_remove(struct i2c_client *i2c) return 0; } -struct i2c_driver rt5514_i2c_driver = { +static struct i2c_driver rt5514_i2c_driver = { .driver = { .name = "rt5514", .of_match_table = of_match_ptr(rt5514_of_match), -- cgit v1.2.3 From 0a78b248c3324fbbba49f74e2c93e0f436583788 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 14 Apr 2017 09:40:31 -0700 Subject: ASoC: rt5514: Avoid relying on uninitialized "val" value In rt5514_i2c_probe() if the regmap_read(RT5514_VENDOR_ID2) fails then "val" may be left as uninitialized. Current code relies on "val" not being RT5514_DEVICE_ID, but that's potentially unsafe. Let's check for errors from regmap_read() and also explicitly init the value do we're not passing a possibly uninitialized int to printk. Signed-off-by: Douglas Anderson Signed-off-by: Mark Brown --- sound/soc/codecs/rt5514.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index 481e77763fe4..969a05620e04 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -1090,7 +1090,7 @@ static int rt5514_i2c_probe(struct i2c_client *i2c, struct rt5514_platform_data *pdata = dev_get_platdata(&i2c->dev); struct rt5514_priv *rt5514; int ret; - unsigned int val; + unsigned int val = ~0; rt5514 = devm_kzalloc(&i2c->dev, sizeof(struct rt5514_priv), GFP_KERNEL); @@ -1120,8 +1120,8 @@ static int rt5514_i2c_probe(struct i2c_client *i2c, return ret; } - regmap_read(rt5514->regmap, RT5514_VENDOR_ID2, &val); - if (val != RT5514_DEVICE_ID) { + ret = regmap_read(rt5514->regmap, RT5514_VENDOR_ID2, &val); + if (ret || val != RT5514_DEVICE_ID) { dev_err(&i2c->dev, "Device with ID register %x is not rt5514\n", val); return -ENODEV; -- cgit v1.2.3 From 7952b4baff402ddca1a263380bfd142f10290eb8 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 14 Apr 2017 09:40:32 -0700 Subject: ASoC: rt5514: Unconfuse the rt5514 at probe / resume time The rt5514 can get confused and incorrectly detect a start bit if the SCL/SDA lines happen to both go low and then high again. This situation has been seen to happen at reboot time and is also theoretically possible during suspend/resume if the rt5514 keeps power but we shut down the i2c connection. When this happens the rt5514 is confused about the state of the i2c bus and won't recognize its own address. That will lead to the rt5514 incorrectly NAKing the first transfer. A single i2c transfer to any address should be enough to get the rt5514 out of this funky state. It is currently believed that this problem should be fixed in the rt5514 driver itself because it seems that the i2c controller in the rt5514 is easily confused. Most i2c devices wouldn't detect a start bit in this case. Signed-off-by: Douglas Anderson Signed-off-by: Mark Brown --- sound/soc/codecs/rt5514.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'sound/soc') diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index 969a05620e04..f91221b1ddf0 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -1084,6 +1084,21 @@ static int rt5514_parse_dt(struct rt5514_priv *rt5514, struct device *dev) return 0; } +static __maybe_unused int rt5514_i2c_resume(struct device *dev) +{ + struct rt5514_priv *rt5514 = dev_get_drvdata(dev); + unsigned int val; + + /* + * Add a bogus read to avoid rt5514's confusion after s2r in case it + * saw glitches on the i2c lines and thought the other side sent a + * start bit. + */ + regmap_read(rt5514->regmap, RT5514_VENDOR_ID2, &val); + + return 0; +} + static int rt5514_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1120,7 +1135,15 @@ static int rt5514_i2c_probe(struct i2c_client *i2c, return ret; } + /* + * The rt5514 can get confused if the i2c lines glitch together, as + * can happen at bootup as regulators are turned off and on. If it's + * in this glitched state the first i2c read will fail, so we'll give + * it one change to retry. + */ ret = regmap_read(rt5514->regmap, RT5514_VENDOR_ID2, &val); + if (ret || val != RT5514_DEVICE_ID) + ret = regmap_read(rt5514->regmap, RT5514_VENDOR_ID2, &val); if (ret || val != RT5514_DEVICE_ID) { dev_err(&i2c->dev, "Device with ID register %x is not rt5514\n", val); @@ -1149,10 +1172,15 @@ static int rt5514_i2c_remove(struct i2c_client *i2c) return 0; } +static const struct dev_pm_ops rt5514_i2_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(NULL, rt5514_i2c_resume) +}; + static struct i2c_driver rt5514_i2c_driver = { .driver = { .name = "rt5514", .of_match_table = of_match_ptr(rt5514_of_match), + .pm = &rt5514_i2_pm_ops, }, .probe = rt5514_i2c_probe, .remove = rt5514_i2c_remove, -- cgit v1.2.3