From d8e42a2b0addf238be8b3b37dcd9795a5c1be459 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 19 Jul 2023 10:01:15 +0200 Subject: batman-adv: Don't increase MTU when set by user If the user set an MTU value, it usually means that there are special requirements for the MTU. But if an interface gots activated, the MTU was always recalculated and then the user set value was overwritten. The only reason why this user set value has to be overwritten, is when the MTU has to be decreased because batman-adv is not able to transfer packets with the user specified size. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/soft-interface.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'net/batman-adv/soft-interface.c') diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index d3fdf82282af..85d00dc9ce32 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -153,11 +153,14 @@ static int batadv_interface_set_mac_addr(struct net_device *dev, void *p) static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu) { + struct batadv_priv *bat_priv = netdev_priv(dev); + /* check ranges */ if (new_mtu < 68 || new_mtu > batadv_hardif_min_mtu(dev)) return -EINVAL; dev->mtu = new_mtu; + bat_priv->mtu_set_by_user = new_mtu; return 0; } -- cgit v1.2.3