From 64be97822b781e921c7eda2d4089fd1fdf3aabba Mon Sep 17 00:00:00 2001 From: kishore kadiyala Date: Fri, 1 Oct 2010 16:35:28 -0700 Subject: omap4 hsmmc: Update ocr mask for MMC2 for regulator to use On OMAP4, MMC2 controller has eMMC which draws power from VAUX regulator on TWL. Though the eMMC supports dual voltage[1.8v/3v] as per ocr register, its VCC is fixed at 3V for operation. With this once the mmc core selects the minimum voltage[1.8] supported based on the ocr value read from OCR register, eMMC will not get detected. Thus the platform data for MMC2 is updated with ocr mask and same will be communicated to core which will set the regulator to always operate at 3V when ever turned ON. Cc: Tony Lindgren Cc: Andrew Morton Cc: Madhusudhan Chikkature Cc: Adrian Hunter Signed-off-by: Kishore Kadiyala Signed-off-by: Tony Lindgren --- drivers/mmc/host/omap_hsmmc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index dc95756fd95c..4693e62145a6 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -364,6 +364,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) { struct regulator *reg; int ret = 0; + int ocr_value = 0; switch (host->id) { case OMAP_MMC1_DEVID: @@ -396,6 +397,17 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) } } else { host->vcc = reg; + ocr_value = mmc_regulator_get_ocrmask(reg); + if (!mmc_slot(host).ocr_mask) { + mmc_slot(host).ocr_mask = ocr_value; + } else { + if (!(mmc_slot(host).ocr_mask & ocr_value)) { + pr_err("MMC%d ocrmask %x is not supported\n", + host->id, mmc_slot(host).ocr_mask); + mmc_slot(host).ocr_mask = 0; + return -EINVAL; + } + } mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); /* Allow an aux regulator */ -- cgit v1.2.3