From af7e9069543aabd415d7c543f3f89b143ac1a932 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 6 Oct 2014 21:17:14 -0700 Subject: mfd: axp20x: Extend axp20x to support axp288 pmic X-Powers AXP288 is a customized PMIC for Intel Baytrail-CR platforms. Similar to AXP202/209, AXP288 comes with USB charger, more LDO and BUCK channels, and AD converters. It also provides extended status and interrupt reporting capabilities than the devices currently supported in axp20x.c. In addition to feature extension, this patch also adds ACPI binding for enumeration. This consolidated driver should support more X-Powers' PMICs in both device tree and ACPI enumerated platforms. Signed-off-by: Jacob Pan Reviewed-by: Maxime Ripard Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 3 +- drivers/mfd/axp20x.c | 361 +++++++++++++++++++++++++++++++++++++++++++-------- 2 files changed, 308 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index de5abf244746..c183edb45b52 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -74,7 +74,8 @@ config MFD_AXP20X select REGMAP_IRQ depends on I2C=y help - If you say Y here you get support for the X-Powers AXP202 and AXP209. + If you say Y here you get support for the X-Powers AXP202, AXP209 and + AXP288 power management IC (PMIC). This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index dee653989e3a..b2fb7f492c86 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -1,9 +1,9 @@ /* - * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209 + * axp20x.c - MFD core driver for the X-Powers' Power Management ICs * - * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC - * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature - * as well as 4 configurable GPIOs. + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as configurable GPIOs. * * Author: Carlo Caione * @@ -25,9 +25,16 @@ #include #include #include +#include #define AXP20X_OFF 0x80 +static const char const *axp20x_model_names[] = { + "AXP202", + "AXP209", + "AXP288", +}; + static const struct regmap_range axp20x_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), @@ -47,6 +54,25 @@ static const struct regmap_access_table axp20x_volatile_table = { .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), }; +static const struct regmap_range axp288_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), +}; + +static const struct regmap_range axp288_volatile_ranges[] = { + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L), +}; + +static const struct regmap_access_table axp288_writeable_table = { + .yes_ranges = axp288_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges), +}; + +static const struct regmap_access_table axp288_volatile_table = { + .yes_ranges = axp288_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), +}; + static struct resource axp20x_pek_resources[] = { { .name = "PEK_DBR", @@ -61,6 +87,39 @@ static struct resource axp20x_pek_resources[] = { }, }; +static struct resource axp288_battery_resources[] = { + { + .start = AXP288_IRQ_QWBTU, + .end = AXP288_IRQ_QWBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WBTU, + .end = AXP288_IRQ_WBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QWBTO, + .end = AXP288_IRQ_QWBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WBTO, + .end = AXP288_IRQ_WBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WL2, + .end = AXP288_IRQ_WL2, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WL1, + .end = AXP288_IRQ_WL1, + .flags = IORESOURCE_IRQ, + }, +}; + static const struct regmap_config axp20x_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -70,47 +129,96 @@ static const struct regmap_config axp20x_regmap_config = { .cache_type = REGCACHE_RBTREE, }; -#define AXP20X_IRQ(_irq, _off, _mask) \ - [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } +static const struct regmap_config axp288_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp288_writeable_table, + .volatile_table = &axp288_volatile_table, + .max_register = AXP288_FG_TUNE5, + .cache_type = REGCACHE_RBTREE, +}; + +#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ + [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } static const struct regmap_irq axp20x_regmap_irqs[] = { - AXP20X_IRQ(ACIN_OVER_V, 0, 7), - AXP20X_IRQ(ACIN_PLUGIN, 0, 6), - AXP20X_IRQ(ACIN_REMOVAL, 0, 5), - AXP20X_IRQ(VBUS_OVER_V, 0, 4), - AXP20X_IRQ(VBUS_PLUGIN, 0, 3), - AXP20X_IRQ(VBUS_REMOVAL, 0, 2), - AXP20X_IRQ(VBUS_V_LOW, 0, 1), - AXP20X_IRQ(BATT_PLUGIN, 1, 7), - AXP20X_IRQ(BATT_REMOVAL, 1, 6), - AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5), - AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4), - AXP20X_IRQ(CHARG, 1, 3), - AXP20X_IRQ(CHARG_DONE, 1, 2), - AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1), - AXP20X_IRQ(BATT_TEMP_LOW, 1, 0), - AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7), - AXP20X_IRQ(CHARG_I_LOW, 2, 6), - AXP20X_IRQ(DCDC1_V_LONG, 2, 5), - AXP20X_IRQ(DCDC2_V_LONG, 2, 4), - AXP20X_IRQ(DCDC3_V_LONG, 2, 3), - AXP20X_IRQ(PEK_SHORT, 2, 1), - AXP20X_IRQ(PEK_LONG, 2, 0), - AXP20X_IRQ(N_OE_PWR_ON, 3, 7), - AXP20X_IRQ(N_OE_PWR_OFF, 3, 6), - AXP20X_IRQ(VBUS_VALID, 3, 5), - AXP20X_IRQ(VBUS_NOT_VALID, 3, 4), - AXP20X_IRQ(VBUS_SESS_VALID, 3, 3), - AXP20X_IRQ(VBUS_SESS_END, 3, 2), - AXP20X_IRQ(LOW_PWR_LVL1, 3, 1), - AXP20X_IRQ(LOW_PWR_LVL2, 3, 0), - AXP20X_IRQ(TIMER, 4, 7), - AXP20X_IRQ(PEK_RIS_EDGE, 4, 6), - AXP20X_IRQ(PEK_FAL_EDGE, 4, 5), - AXP20X_IRQ(GPIO3_INPUT, 4, 3), - AXP20X_IRQ(GPIO2_INPUT, 4, 2), - AXP20X_IRQ(GPIO1_INPUT, 4, 1), - AXP20X_IRQ(GPIO0_INPUT, 4, 0), + INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), + INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), + INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5), + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1), + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), + INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5), + INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4), + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1), + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0), + INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7), + INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6), + INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5), + INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4), + INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3), + INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1), + INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0), + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7), + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6), + INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5), + INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4), + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2), + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1), + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0), + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), + INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6), + INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5), + INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3), + INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2), + INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1), + INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), +}; + +/* some IRQs are compatible with axp20x models */ +static const struct regmap_irq axp288_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), + + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4), + INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5), + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), + + INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0), + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1), + INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2), + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 3), + INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4), + INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5), + INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6), + INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7), + + INIT_REGMAP_IRQ(AXP288, WL2, 3, 0), + INIT_REGMAP_IRQ(AXP288, WL1, 3, 1), + INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2), + INIT_REGMAP_IRQ(AXP288, OT, 3, 7), + + INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0), + INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1), + INIT_REGMAP_IRQ(AXP288, POKO, 4, 2), + INIT_REGMAP_IRQ(AXP288, POKL, 4, 3), + INIT_REGMAP_IRQ(AXP288, POKS, 4, 4), + INIT_REGMAP_IRQ(AXP288, POKN, 4, 5), + INIT_REGMAP_IRQ(AXP288, POKP, 4, 6), + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), + + INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0), + INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), }; static const struct of_device_id axp20x_of_match[] = { @@ -128,16 +236,39 @@ static const struct i2c_device_id axp20x_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); +static struct acpi_device_id axp20x_acpi_match[] = { + { + .id = "INT33F4", + .driver_data = AXP288_ID, + }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); + static const struct regmap_irq_chip axp20x_regmap_irq_chip = { .name = "axp20x_irq_chip", .status_base = AXP20X_IRQ1_STATE, .ack_base = AXP20X_IRQ1_STATE, .mask_base = AXP20X_IRQ1_EN, - .num_regs = 5, + .mask_invert = true, + .init_ack_masked = true, .irqs = axp20x_regmap_irqs, .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs), + .num_regs = 5, + +}; + +static const struct regmap_irq_chip axp288_regmap_irq_chip = { + .name = "axp288_irq_chip", + .status_base = AXP20X_IRQ1_STATE, + .ack_base = AXP20X_IRQ1_STATE, + .mask_base = AXP20X_IRQ1_EN, .mask_invert = true, .init_ack_masked = true, + .irqs = axp288_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp288_regmap_irqs), + .num_regs = 6, + }; static const char * const axp20x_supplies[] = { @@ -161,36 +292,155 @@ static struct mfd_cell axp20x_cells[] = { }, }; +static struct resource axp288_adc_resources[] = { + { + .name = "GPADC", + .start = AXP288_IRQ_GPADC, + .end = AXP288_IRQ_GPADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource axp288_charger_resources[] = { + { + .start = AXP288_IRQ_OV, + .end = AXP288_IRQ_OV, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_DONE, + .end = AXP288_IRQ_DONE, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CHARGING, + .end = AXP288_IRQ_CHARGING, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_SAFE_QUIT, + .end = AXP288_IRQ_SAFE_QUIT, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_SAFE_ENTER, + .end = AXP288_IRQ_SAFE_ENTER, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QCBTU, + .end = AXP288_IRQ_QCBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CBTU, + .end = AXP288_IRQ_CBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QCBTO, + .end = AXP288_IRQ_QCBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CBTO, + .end = AXP288_IRQ_CBTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell axp288_cells[] = { + { + .name = "axp288_adc", + .num_resources = ARRAY_SIZE(axp288_adc_resources), + .resources = axp288_adc_resources, + }, + { + .name = "axp288_charger", + .num_resources = ARRAY_SIZE(axp288_charger_resources), + .resources = axp288_charger_resources, + }, + { + .name = "axp288_battery", + .num_resources = ARRAY_SIZE(axp288_battery_resources), + .resources = axp288_battery_resources, + }, +}; + static struct axp20x_dev *axp20x_pm_power_off; static void axp20x_power_off(void) { + if (axp20x_pm_power_off->variant == AXP288_ID) + return; + regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL, AXP20X_OFF); } +static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) +{ + const struct acpi_device_id *acpi_id; + const struct of_device_id *of_id; + + if (dev->of_node) { + of_id = of_match_device(axp20x_of_match, dev); + if (!of_id) { + dev_err(dev, "Unable to match OF ID\n"); + return -ENODEV; + } + axp20x->variant = (long) of_id->data; + } else { + acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!acpi_id || !acpi_id->driver_data) { + dev_err(dev, "Unable to match ACPI ID and data\n"); + return -ENODEV; + } + axp20x->variant = (long) acpi_id->driver_data; + } + + switch (axp20x->variant) { + case AXP202_ID: + case AXP209_ID: + axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); + axp20x->cells = axp20x_cells; + axp20x->regmap_cfg = &axp20x_regmap_config; + axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; + break; + case AXP288_ID: + axp20x->cells = axp288_cells; + axp20x->nr_cells = ARRAY_SIZE(axp288_cells); + axp20x->regmap_cfg = &axp288_regmap_config; + axp20x->regmap_irq_chip = &axp288_regmap_irq_chip; + break; + default: + dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); + return -EINVAL; + } + dev_info(dev, "AXP20x variant %s found\n", + axp20x_model_names[axp20x->variant]); + + return 0; +} + static int axp20x_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct axp20x_dev *axp20x; - const struct of_device_id *of_id; int ret; axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); if (!axp20x) return -ENOMEM; - of_id = of_match_device(axp20x_of_match, &i2c->dev); - if (!of_id) { - dev_err(&i2c->dev, "Unable to setup AXP20X data\n"); - return -ENODEV; - } - axp20x->variant = (long) of_id->data; + ret = axp20x_match_device(axp20x, &i2c->dev); + if (ret) + return ret; axp20x->i2c_client = i2c; axp20x->dev = &i2c->dev; dev_set_drvdata(axp20x->dev, axp20x); - axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config); + axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); if (IS_ERR(axp20x->regmap)) { ret = PTR_ERR(axp20x->regmap); dev_err(&i2c->dev, "regmap init failed: %d\n", ret); @@ -199,15 +449,15 @@ static int axp20x_i2c_probe(struct i2c_client *i2c, ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq, IRQF_ONESHOT | IRQF_SHARED, -1, - &axp20x_regmap_irq_chip, + axp20x->regmap_irq_chip, &axp20x->regmap_irqc); if (ret) { dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret); return ret; } - ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells, - ARRAY_SIZE(axp20x_cells), NULL, 0, NULL); + ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, + axp20x->nr_cells, NULL, 0, NULL); if (ret) { dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); @@ -245,6 +495,7 @@ static struct i2c_driver axp20x_i2c_driver = { .name = "axp20x", .owner = THIS_MODULE, .of_match_table = of_match_ptr(axp20x_of_match), + .acpi_match_table = ACPI_PTR(axp20x_acpi_match), }, .probe = axp20x_i2c_probe, .remove = axp20x_i2c_remove, -- cgit v1.2.3 From de89bd7f215b44ef18f56b0ddb579b44a1180958 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 6 Oct 2014 21:17:15 -0700 Subject: iio: adc: Add support for axp288 adc Platform driver for X-Powers AXP288 ADC, which is a sub-device of the customized AXP288 PMIC for Intel Baytrail-CR platforms. GPADC device enumerates as one of the MFD cell devices. It uses IIO infrastructure to communicate with userspace and consumer drivers. Usages of ADC channels include battery charging and thermal sensors. Based on initial work by: Ramakrishna Pallala Acked-by: Jonathan Cameron Signed-off-by: Jacob Pan Signed-off-by: Lee Jones --- drivers/iio/adc/Kconfig | 8 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/axp288_adc.c | 254 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 263 insertions(+) create mode 100644 drivers/iio/adc/axp288_adc.c (limited to 'drivers') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 11b048a59fde..db2681b4f24b 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -127,6 +127,14 @@ config AT91_ADC help Say yes here to build support for Atmel AT91 ADC. +config AXP288_ADC + tristate "X-Powers AXP288 ADC driver" + depends on MFD_AXP20X + help + Say yes here to have support for X-Powers power management IC (PMIC) ADC + device. Depending on platform configuration, this general purpose ADC can + be used for sampling sensors such as thermal resistors. + config EXYNOS_ADC tristate "Exynos ADC driver support" depends on ARCH_EXYNOS || (OF && COMPILE_TEST) diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index ad81b512aa3d..19640f9dc470 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AT91_ADC) += at91_adc.o +obj-$(CONFIG_AXP288_ADC) += axp288_adc.o obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1027) += max1027.o diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c new file mode 100644 index 000000000000..480028618a84 --- /dev/null +++ b/drivers/iio/adc/axp288_adc.c @@ -0,0 +1,254 @@ +/* + * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver + * + * Copyright (C) 2014 Intel Corporation + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define AXP288_ADC_EN_MASK 0xF1 +#define AXP288_ADC_TS_PIN_GPADC 0xF2 +#define AXP288_ADC_TS_PIN_ON 0xF3 + +enum axp288_adc_id { + AXP288_ADC_TS, + AXP288_ADC_PMIC, + AXP288_ADC_GP, + AXP288_ADC_BATT_CHRG_I, + AXP288_ADC_BATT_DISCHRG_I, + AXP288_ADC_BATT_V, + AXP288_ADC_NR_CHAN, +}; + +struct axp288_adc_info { + int irq; + struct regmap *regmap; +}; + +static const struct iio_chan_spec const axp288_adc_channels[] = { + { + .indexed = 1, + .type = IIO_TEMP, + .channel = 0, + .address = AXP288_TS_ADC_H, + .datasheet_name = "TS_PIN", + }, { + .indexed = 1, + .type = IIO_TEMP, + .channel = 1, + .address = AXP288_PMIC_ADC_H, + .datasheet_name = "PMIC_TEMP", + }, { + .indexed = 1, + .type = IIO_TEMP, + .channel = 2, + .address = AXP288_GP_ADC_H, + .datasheet_name = "GPADC", + }, { + .indexed = 1, + .type = IIO_CURRENT, + .channel = 3, + .address = AXP20X_BATT_CHRG_I_H, + .datasheet_name = "BATT_CHG_I", + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, { + .indexed = 1, + .type = IIO_CURRENT, + .channel = 4, + .address = AXP20X_BATT_DISCHRG_I_H, + .datasheet_name = "BATT_DISCHRG_I", + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, { + .indexed = 1, + .type = IIO_VOLTAGE, + .channel = 5, + .address = AXP20X_BATT_V_H, + .datasheet_name = "BATT_V", + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, +}; + +#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \ + _consumer_channel) \ + { \ + .adc_channel_label = _adc_channel_label, \ + .consumer_dev_name = _consumer_dev_name, \ + .consumer_channel = _consumer_channel, \ + } + +/* for consumer drivers */ +static struct iio_map axp288_adc_default_maps[] = { + AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"), + AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"), + AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"), + AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"), + AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"), + AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"), + {}, +}; + +static int axp288_adc_read_channel(int *val, unsigned long address, + struct regmap *regmap) +{ + u8 buf[2]; + + if (regmap_bulk_read(regmap, address, buf, 2)) + return -EIO; + *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F); + + return IIO_VAL_INT; +} + +static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode, + unsigned long address) +{ + /* channels other than GPADC do not need to switch TS pin */ + if (address != AXP288_GP_ADC_H) + return 0; + + return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode); +} + +static int axp288_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct axp288_adc_info *info = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC, + chan->address)) { + dev_err(&indio_dev->dev, "GPADC mode\n"); + ret = -EINVAL; + break; + } + ret = axp288_adc_read_channel(val, chan->address, info->regmap); + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON, + chan->address)) + dev_err(&indio_dev->dev, "TS pin restore\n"); + break; + case IIO_CHAN_INFO_PROCESSED: + ret = axp288_adc_read_channel(val, chan->address, info->regmap); + break; + default: + ret = -EINVAL; + } + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int axp288_adc_set_state(struct regmap *regmap) +{ + /* ADC should be always enabled for internal FG to function */ + if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON)) + return -EIO; + + return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK); +} + +static const struct iio_info axp288_adc_iio_info = { + .read_raw = &axp288_adc_read_raw, + .driver_module = THIS_MODULE, +}; + +static int axp288_adc_probe(struct platform_device *pdev) +{ + int ret; + struct axp288_adc_info *info; + struct iio_dev *indio_dev; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + + info = iio_priv(indio_dev); + info->irq = platform_get_irq(pdev, 0); + if (info->irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + return info->irq; + } + platform_set_drvdata(pdev, indio_dev); + info->regmap = axp20x->regmap; + /* + * Set ADC to enabled state at all time, including system suspend. + * otherwise internal fuel gauge functionality may be affected. + */ + ret = axp288_adc_set_state(axp20x->regmap); + if (ret) { + dev_err(&pdev->dev, "unable to enable ADC device\n"); + return ret; + } + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = pdev->name; + indio_dev->channels = axp288_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels); + indio_dev->info = &axp288_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + ret = iio_map_array_register(indio_dev, axp288_adc_default_maps); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register iio device\n"); + goto err_array_unregister; + } + return 0; + +err_array_unregister: + iio_map_array_unregister(indio_dev); + + return ret; +} + +static int axp288_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + + iio_device_unregister(indio_dev); + iio_map_array_unregister(indio_dev); + + return 0; +} + +static struct platform_driver axp288_adc_driver = { + .probe = axp288_adc_probe, + .remove = axp288_adc_remove, + .driver = { + .name = "axp288_adc", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(axp288_adc_driver); + +MODULE_AUTHOR("Jacob Pan "); +MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 338a128142975439a19ab3c91480bc9d5a71f033 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Thu, 6 Nov 2014 15:48:03 +0200 Subject: mfd: Add support for Diolan DLN-2 devices This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO Master Adapter DLN-2. Details about the device can be found here: https://www.diolan.com/i2c/i2c_interface.html. Information about the USB protocol can be found in the Programmer's Reference Manual [1], see section 1.7. Because the hardware has a single transmit endpoint and a single receive endpoint the communication between the various DLN2 drivers and the hardware will be muxed/demuxed by this driver. Each DLN2 module will be identified by the handle field within the DLN2 message header. If a DLN2 module issues multiple commands in parallel they will be identified by the echo counter field in the message header. The DLN2 modules can use the dln2_transfer() function to issue a command and wait for its response. They can also register a callback that is going to be called when a specific event id is generated by the device (e.g. GPIO interrupts). The device uses handle 0 for sending events. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Octavian Purdila Reviewed-by: Johan Hovold Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 10 + drivers/mfd/Makefile | 1 + drivers/mfd/dln2.c | 763 +++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/dln2.h | 103 +++++++ 4 files changed, 877 insertions(+) create mode 100644 drivers/mfd/dln2.c create mode 100644 include/linux/mfd/dln2.h (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1456ea70bbc7..c1acc76a519f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -183,6 +183,16 @@ config MFD_DA9063 Additional drivers must be enabled in order to use the functionality of the device. +config MFD_DLN2 + tristate "Diolan DLN2 support" + select MFD_CORE + depends on USB + help + This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter + DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2, + etc. must be enabled in order to use the functionality of + the device. + config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8bd54b1253af..10bbd0b9096b 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -174,6 +174,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o +obj-$(CONFIG_MFD_DLN2) += dln2.o intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c new file mode 100644 index 000000000000..9765a174d2c5 --- /dev/null +++ b/drivers/mfd/dln2.c @@ -0,0 +1,763 @@ +/* + * Driver for the Diolan DLN-2 USB adapter + * + * Copyright (c) 2014 Intel Corporation + * + * Derived from: + * i2c-diolan-u2c.c + * Copyright (c) 2010-2011 Ericsson AB + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct dln2_header { + __le16 size; + __le16 id; + __le16 echo; + __le16 handle; +}; + +struct dln2_response { + struct dln2_header hdr; + __le16 result; +}; + +#define DLN2_GENERIC_MODULE_ID 0x00 +#define DLN2_GENERIC_CMD(cmd) DLN2_CMD(cmd, DLN2_GENERIC_MODULE_ID) +#define CMD_GET_DEVICE_VER DLN2_GENERIC_CMD(0x30) +#define CMD_GET_DEVICE_SN DLN2_GENERIC_CMD(0x31) + +#define DLN2_HW_ID 0x200 +#define DLN2_USB_TIMEOUT 200 /* in ms */ +#define DLN2_MAX_RX_SLOTS 16 +#define DLN2_MAX_URBS 16 +#define DLN2_RX_BUF_SIZE 512 + +enum dln2_handle { + DLN2_HANDLE_EVENT = 0, /* don't change, hardware defined */ + DLN2_HANDLE_CTRL, + DLN2_HANDLE_GPIO, + DLN2_HANDLE_I2C, + DLN2_HANDLES +}; + +/* + * Receive context used between the receive demultiplexer and the transfer + * routine. While sending a request the transfer routine will look for a free + * receive context and use it to wait for a response and to receive the URB and + * thus the response data. + */ +struct dln2_rx_context { + /* completion used to wait for a response */ + struct completion done; + + /* if non-NULL the URB contains the response */ + struct urb *urb; + + /* if true then this context is used to wait for a response */ + bool in_use; +}; + +/* + * Receive contexts for a particular DLN2 module (i2c, gpio, etc.). We use the + * handle header field to identify the module in dln2_dev.mod_rx_slots and then + * the echo header field to index the slots field and find the receive context + * for a particular request. + */ +struct dln2_mod_rx_slots { + /* RX slots bitmap */ + DECLARE_BITMAP(bmap, DLN2_MAX_RX_SLOTS); + + /* used to wait for a free RX slot */ + wait_queue_head_t wq; + + /* used to wait for an RX operation to complete */ + struct dln2_rx_context slots[DLN2_MAX_RX_SLOTS]; + + /* avoid races between alloc/free_rx_slot and dln2_rx_transfer */ + spinlock_t lock; +}; + +struct dln2_dev { + struct usb_device *usb_dev; + struct usb_interface *interface; + u8 ep_in; + u8 ep_out; + + struct urb *rx_urb[DLN2_MAX_URBS]; + void *rx_buf[DLN2_MAX_URBS]; + + struct dln2_mod_rx_slots mod_rx_slots[DLN2_HANDLES]; + + struct list_head event_cb_list; + spinlock_t event_cb_lock; + + bool disconnect; + int active_transfers; + wait_queue_head_t disconnect_wq; + spinlock_t disconnect_lock; +}; + +struct dln2_event_cb_entry { + struct list_head list; + u16 id; + struct platform_device *pdev; + dln2_event_cb_t callback; +}; + +int dln2_register_event_cb(struct platform_device *pdev, u16 id, + dln2_event_cb_t event_cb) +{ + struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent); + struct dln2_event_cb_entry *i, *entry; + unsigned long flags; + int ret = 0; + + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + entry->id = id; + entry->callback = event_cb; + entry->pdev = pdev; + + spin_lock_irqsave(&dln2->event_cb_lock, flags); + + list_for_each_entry(i, &dln2->event_cb_list, list) { + if (i->id == id) { + ret = -EBUSY; + break; + } + } + + if (!ret) + list_add_rcu(&entry->list, &dln2->event_cb_list); + + spin_unlock_irqrestore(&dln2->event_cb_lock, flags); + + if (ret) + kfree(entry); + + return ret; +} +EXPORT_SYMBOL(dln2_register_event_cb); + +void dln2_unregister_event_cb(struct platform_device *pdev, u16 id) +{ + struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent); + struct dln2_event_cb_entry *i; + unsigned long flags; + bool found = false; + + spin_lock_irqsave(&dln2->event_cb_lock, flags); + + list_for_each_entry(i, &dln2->event_cb_list, list) { + if (i->id == id) { + list_del_rcu(&i->list); + found = true; + break; + } + } + + spin_unlock_irqrestore(&dln2->event_cb_lock, flags); + + if (found) { + synchronize_rcu(); + kfree(i); + } +} +EXPORT_SYMBOL(dln2_unregister_event_cb); + +/* + * Returns true if a valid transfer slot is found. In this case the URB must not + * be resubmitted immediately in dln2_rx as we need the data when dln2_transfer + * is woke up. It will be resubmitted there. + */ +static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb, + u16 handle, u16 rx_slot) +{ + struct device *dev = &dln2->interface->dev; + struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle]; + struct dln2_rx_context *rxc; + bool valid_slot = false; + + rxc = &rxs->slots[rx_slot]; + + /* + * No need to disable interrupts as this lock is not taken in interrupt + * context elsewhere in this driver. This function (or its callers) are + * also not exported to other modules. + */ + spin_lock(&rxs->lock); + if (rxc->in_use && !rxc->urb) { + rxc->urb = urb; + complete(&rxc->done); + valid_slot = true; + } + spin_unlock(&rxs->lock); + + if (!valid_slot) + dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot); + + return valid_slot; +} + +static void dln2_run_event_callbacks(struct dln2_dev *dln2, u16 id, u16 echo, + void *data, int len) +{ + struct dln2_event_cb_entry *i; + + rcu_read_lock(); + + list_for_each_entry_rcu(i, &dln2->event_cb_list, list) { + if (i->id == id) { + i->callback(i->pdev, echo, data, len); + break; + } + } + + rcu_read_unlock(); +} + +static void dln2_rx(struct urb *urb) +{ + struct dln2_dev *dln2 = urb->context; + struct dln2_header *hdr = urb->transfer_buffer; + struct device *dev = &dln2->interface->dev; + u16 id, echo, handle, size; + u8 *data; + int len; + int err; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + case -EPIPE: + /* this urb is terminated, clean up */ + dev_dbg(dev, "urb shutting down with status %d\n", urb->status); + return; + default: + dev_dbg(dev, "nonzero urb status received %d\n", urb->status); + goto out; + } + + if (urb->actual_length < sizeof(struct dln2_header)) { + dev_err(dev, "short response: %d\n", urb->actual_length); + goto out; + } + + handle = le16_to_cpu(hdr->handle); + id = le16_to_cpu(hdr->id); + echo = le16_to_cpu(hdr->echo); + size = le16_to_cpu(hdr->size); + + if (size != urb->actual_length) { + dev_err(dev, "size mismatch: handle %x cmd %x echo %x size %d actual %d\n", + handle, id, echo, size, urb->actual_length); + goto out; + } + + if (handle >= DLN2_HANDLES) { + dev_warn(dev, "invalid handle %d\n", handle); + goto out; + } + + data = urb->transfer_buffer + sizeof(struct dln2_header); + len = urb->actual_length - sizeof(struct dln2_header); + + if (handle == DLN2_HANDLE_EVENT) { + dln2_run_event_callbacks(dln2, id, echo, data, len); + } else { + /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */ + if (dln2_transfer_complete(dln2, urb, handle, echo)) + return; + } + +out: + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) + dev_err(dev, "failed to resubmit RX URB: %d\n", err); +} + +static void *dln2_prep_buf(u16 handle, u16 cmd, u16 echo, const void *obuf, + int *obuf_len, gfp_t gfp) +{ + int len; + void *buf; + struct dln2_header *hdr; + + len = *obuf_len + sizeof(*hdr); + buf = kmalloc(len, gfp); + if (!buf) + return NULL; + + hdr = (struct dln2_header *)buf; + hdr->id = cpu_to_le16(cmd); + hdr->size = cpu_to_le16(len); + hdr->echo = cpu_to_le16(echo); + hdr->handle = cpu_to_le16(handle); + + memcpy(buf + sizeof(*hdr), obuf, *obuf_len); + + *obuf_len = len; + + return buf; +} + +static int dln2_send_wait(struct dln2_dev *dln2, u16 handle, u16 cmd, u16 echo, + const void *obuf, int obuf_len) +{ + int ret = 0; + int len = obuf_len; + void *buf; + int actual; + + buf = dln2_prep_buf(handle, cmd, echo, obuf, &len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usb_bulk_msg(dln2->usb_dev, + usb_sndbulkpipe(dln2->usb_dev, dln2->ep_out), + buf, len, &actual, DLN2_USB_TIMEOUT); + + kfree(buf); + + return ret; +} + +static bool find_free_slot(struct dln2_dev *dln2, u16 handle, int *slot) +{ + struct dln2_mod_rx_slots *rxs; + unsigned long flags; + + if (dln2->disconnect) { + *slot = -ENODEV; + return true; + } + + rxs = &dln2->mod_rx_slots[handle]; + + spin_lock_irqsave(&rxs->lock, flags); + + *slot = find_first_zero_bit(rxs->bmap, DLN2_MAX_RX_SLOTS); + + if (*slot < DLN2_MAX_RX_SLOTS) { + struct dln2_rx_context *rxc = &rxs->slots[*slot]; + + set_bit(*slot, rxs->bmap); + rxc->in_use = true; + } + + spin_unlock_irqrestore(&rxs->lock, flags); + + return *slot < DLN2_MAX_RX_SLOTS; +} + +static int alloc_rx_slot(struct dln2_dev *dln2, u16 handle) +{ + int ret; + int slot; + + /* + * No need to timeout here, the wait is bounded by the timeout in + * _dln2_transfer. + */ + ret = wait_event_interruptible(dln2->mod_rx_slots[handle].wq, + find_free_slot(dln2, handle, &slot)); + if (ret < 0) + return ret; + + return slot; +} + +static void free_rx_slot(struct dln2_dev *dln2, u16 handle, int slot) +{ + struct dln2_mod_rx_slots *rxs; + struct urb *urb = NULL; + unsigned long flags; + struct dln2_rx_context *rxc; + + rxs = &dln2->mod_rx_slots[handle]; + + spin_lock_irqsave(&rxs->lock, flags); + + clear_bit(slot, rxs->bmap); + + rxc = &rxs->slots[slot]; + rxc->in_use = false; + urb = rxc->urb; + rxc->urb = NULL; + reinit_completion(&rxc->done); + + spin_unlock_irqrestore(&rxs->lock, flags); + + if (urb) { + int err; + struct device *dev = &dln2->interface->dev; + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err < 0) + dev_err(dev, "failed to resubmit RX URB: %d\n", err); + } + + wake_up_interruptible(&rxs->wq); +} + +static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, + const void *obuf, unsigned obuf_len, + void *ibuf, unsigned *ibuf_len) +{ + int ret = 0; + int rx_slot; + struct dln2_response *rsp; + struct dln2_rx_context *rxc; + struct device *dev = &dln2->interface->dev; + const unsigned long timeout = DLN2_USB_TIMEOUT * HZ / 1000; + struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle]; + + spin_lock(&dln2->disconnect_lock); + if (!dln2->disconnect) + dln2->active_transfers++; + else + ret = -ENODEV; + spin_unlock(&dln2->disconnect_lock); + + if (ret) + return ret; + + rx_slot = alloc_rx_slot(dln2, handle); + if (rx_slot < 0) { + ret = rx_slot; + goto out_decr; + } + + ret = dln2_send_wait(dln2, handle, cmd, rx_slot, obuf, obuf_len); + if (ret < 0) { + dev_err(dev, "USB write failed: %d\n", ret); + goto out_free_rx_slot; + } + + rxc = &rxs->slots[rx_slot]; + + ret = wait_for_completion_interruptible_timeout(&rxc->done, timeout); + if (ret <= 0) { + if (!ret) + ret = -ETIMEDOUT; + goto out_free_rx_slot; + } + + if (dln2->disconnect) { + ret = -ENODEV; + goto out_free_rx_slot; + } + + /* if we got here we know that the response header has been checked */ + rsp = rxc->urb->transfer_buffer; + + if (rsp->hdr.size < sizeof(*rsp)) { + ret = -EPROTO; + goto out_free_rx_slot; + } + + if (le16_to_cpu(rsp->result) > 0x80) { + dev_dbg(dev, "%d received response with error %d\n", + handle, le16_to_cpu(rsp->result)); + ret = -EREMOTEIO; + goto out_free_rx_slot; + } + + if (!ibuf) { + ret = 0; + goto out_free_rx_slot; + } + + if (*ibuf_len > rsp->hdr.size - sizeof(*rsp)) + *ibuf_len = rsp->hdr.size - sizeof(*rsp); + + memcpy(ibuf, rsp + 1, *ibuf_len); + +out_free_rx_slot: + free_rx_slot(dln2, handle, rx_slot); +out_decr: + spin_lock(&dln2->disconnect_lock); + dln2->active_transfers--; + spin_unlock(&dln2->disconnect_lock); + if (dln2->disconnect) + wake_up(&dln2->disconnect_wq); + + return ret; +} + +int dln2_transfer(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len, + void *ibuf, unsigned *ibuf_len) +{ + struct dln2_platform_data *dln2_pdata; + struct dln2_dev *dln2; + u16 handle; + + dln2 = dev_get_drvdata(pdev->dev.parent); + dln2_pdata = dev_get_platdata(&pdev->dev); + handle = dln2_pdata->handle; + + return _dln2_transfer(dln2, handle, cmd, obuf, obuf_len, ibuf, + ibuf_len); +} +EXPORT_SYMBOL(dln2_transfer); + +static int dln2_check_hw(struct dln2_dev *dln2) +{ + int ret; + __le32 hw_type; + int len = sizeof(hw_type); + + ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_VER, + NULL, 0, &hw_type, &len); + if (ret < 0) + return ret; + if (len < sizeof(hw_type)) + return -EREMOTEIO; + + if (le32_to_cpu(hw_type) != DLN2_HW_ID) { + dev_err(&dln2->interface->dev, "Device ID 0x%x not supported\n", + le32_to_cpu(hw_type)); + return -ENODEV; + } + + return 0; +} + +static int dln2_print_serialno(struct dln2_dev *dln2) +{ + int ret; + __le32 serial_no; + int len = sizeof(serial_no); + struct device *dev = &dln2->interface->dev; + + ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_SN, NULL, 0, + &serial_no, &len); + if (ret < 0) + return ret; + if (len < sizeof(serial_no)) + return -EREMOTEIO; + + dev_info(dev, "Diolan DLN2 serial %u\n", le32_to_cpu(serial_no)); + + return 0; +} + +static int dln2_hw_init(struct dln2_dev *dln2) +{ + int ret; + + ret = dln2_check_hw(dln2); + if (ret < 0) + return ret; + + return dln2_print_serialno(dln2); +} + +static void dln2_free_rx_urbs(struct dln2_dev *dln2) +{ + int i; + + for (i = 0; i < DLN2_MAX_URBS; i++) { + usb_kill_urb(dln2->rx_urb[i]); + usb_free_urb(dln2->rx_urb[i]); + kfree(dln2->rx_buf[i]); + } +} + +static void dln2_free(struct dln2_dev *dln2) +{ + dln2_free_rx_urbs(dln2); + usb_put_dev(dln2->usb_dev); + kfree(dln2); +} + +static int dln2_setup_rx_urbs(struct dln2_dev *dln2, + struct usb_host_interface *hostif) +{ + int i; + int ret; + const int rx_max_size = DLN2_RX_BUF_SIZE; + struct device *dev = &dln2->interface->dev; + + for (i = 0; i < DLN2_MAX_URBS; i++) { + dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL); + if (!dln2->rx_buf[i]) + return -ENOMEM; + + dln2->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!dln2->rx_urb[i]) + return -ENOMEM; + + usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev, + usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in), + dln2->rx_buf[i], rx_max_size, dln2_rx, dln2); + + ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL); + if (ret < 0) { + dev_err(dev, "failed to submit RX URB: %d\n", ret); + return ret; + } + } + + return 0; +} + +static struct dln2_platform_data dln2_pdata_gpio = { + .handle = DLN2_HANDLE_GPIO, +}; + +/* Only one I2C port seems to be supported on current hardware */ +static struct dln2_platform_data dln2_pdata_i2c = { + .handle = DLN2_HANDLE_I2C, + .port = 0, +}; + +static const struct mfd_cell dln2_devs[] = { + { + .name = "dln2-gpio", + .platform_data = &dln2_pdata_gpio, + .pdata_size = sizeof(struct dln2_platform_data), + }, + { + .name = "dln2-i2c", + .platform_data = &dln2_pdata_i2c, + .pdata_size = sizeof(struct dln2_platform_data), + }, +}; + +static void dln2_disconnect(struct usb_interface *interface) +{ + struct dln2_dev *dln2 = usb_get_intfdata(interface); + int i, j; + + /* don't allow starting new transfers */ + spin_lock(&dln2->disconnect_lock); + dln2->disconnect = true; + spin_unlock(&dln2->disconnect_lock); + + /* cancel in progress transfers */ + for (i = 0; i < DLN2_HANDLES; i++) { + struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[i]; + unsigned long flags; + + spin_lock_irqsave(&rxs->lock, flags); + + /* cancel all response waiters */ + for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) { + struct dln2_rx_context *rxc = &rxs->slots[j]; + + if (rxc->in_use) + complete(&rxc->done); + } + + spin_unlock_irqrestore(&rxs->lock, flags); + } + + /* wait for transfers to end */ + wait_event(dln2->disconnect_wq, !dln2->active_transfers); + + mfd_remove_devices(&interface->dev); + + dln2_free(dln2); +} + +static int dln2_probe(struct usb_interface *interface, + const struct usb_device_id *usb_id) +{ + struct usb_host_interface *hostif = interface->cur_altsetting; + struct device *dev = &interface->dev; + struct dln2_dev *dln2; + int ret; + int i, j; + + if (hostif->desc.bInterfaceNumber != 0 || + hostif->desc.bNumEndpoints < 2) + return -ENODEV; + + dln2 = kzalloc(sizeof(*dln2), GFP_KERNEL); + if (!dln2) + return -ENOMEM; + + dln2->ep_out = hostif->endpoint[0].desc.bEndpointAddress; + dln2->ep_in = hostif->endpoint[1].desc.bEndpointAddress; + dln2->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + dln2->interface = interface; + usb_set_intfdata(interface, dln2); + init_waitqueue_head(&dln2->disconnect_wq); + + for (i = 0; i < DLN2_HANDLES; i++) { + init_waitqueue_head(&dln2->mod_rx_slots[i].wq); + spin_lock_init(&dln2->mod_rx_slots[i].lock); + for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) + init_completion(&dln2->mod_rx_slots[i].slots[j].done); + } + + spin_lock_init(&dln2->event_cb_lock); + spin_lock_init(&dln2->disconnect_lock); + INIT_LIST_HEAD(&dln2->event_cb_list); + + ret = dln2_setup_rx_urbs(dln2, hostif); + if (ret) + goto out_cleanup; + + ret = dln2_hw_init(dln2); + if (ret < 0) { + dev_err(dev, "failed to initialize hardware\n"); + goto out_cleanup; + } + + ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs)); + if (ret != 0) { + dev_err(dev, "failed to add mfd devices to core\n"); + goto out_cleanup; + } + + return 0; + +out_cleanup: + dln2_free(dln2); + + return ret; +} + +static const struct usb_device_id dln2_table[] = { + { USB_DEVICE(0xa257, 0x2013) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, dln2_table); + +static struct usb_driver dln2_driver = { + .name = "dln2", + .probe = dln2_probe, + .disconnect = dln2_disconnect, + .id_table = dln2_table, +}; + +module_usb_driver(dln2_driver); + +MODULE_AUTHOR("Octavian Purdila "); +MODULE_DESCRIPTION("Core driver for the Diolan DLN2 interface adapter"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/dln2.h b/include/linux/mfd/dln2.h new file mode 100644 index 000000000000..004b24576da8 --- /dev/null +++ b/include/linux/mfd/dln2.h @@ -0,0 +1,103 @@ +#ifndef __LINUX_USB_DLN2_H +#define __LINUX_USB_DLN2_H + +#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8)) + +struct dln2_platform_data { + u16 handle; /* sub-driver handle (internally used only) */ + u8 port; /* I2C/SPI port */ +}; + +/** + * dln2_event_cb_t - event callback function signature + * + * @pdev - the sub-device that registered this callback + * @echo - the echo header field received in the message + * @data - the data payload + * @len - the data payload length + * + * The callback function is called in interrupt context and the data payload is + * only valid during the call. If the user needs later access of the data, it + * must copy it. + */ + +typedef void (*dln2_event_cb_t)(struct platform_device *pdev, u16 echo, + const void *data, int len); + +/** + * dl2n_register_event_cb - register a callback function for an event + * + * @pdev - the sub-device that registers the callback + * @event - the event for which to register a callback + * @event_cb - the callback function + * + * @return 0 in case of success, negative value in case of error + */ +int dln2_register_event_cb(struct platform_device *pdev, u16 event, + dln2_event_cb_t event_cb); + +/** + * dln2_unregister_event_cb - unregister the callback function for an event + * + * @pdev - the sub-device that registered the callback + * @event - the event for which to register a callback + */ +void dln2_unregister_event_cb(struct platform_device *pdev, u16 event); + +/** + * dln2_transfer - issue a DLN2 command and wait for a response and the + * associated data + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @obuf - the buffer to be sent to the device; it can be NULL if the user + * doesn't need to transmit data with this command + * @obuf_len - the size of the buffer to be sent to the device + * @ibuf - any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len - must be initialized to the input buffer size; it will be modified + * to indicate the actual data transferred; + * + * @return 0 for success, negative value for errors + */ +int dln2_transfer(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len, + void *ibuf, unsigned *ibuf_len); + +/** + * dln2_transfer_rx - variant of @dln2_transfer() where TX buffer is not needed + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @ibuf - any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len - must be initialized to the input buffer size; it will be modified + * to indicate the actual data transferred; + * + * @return 0 for success, negative value for errors + */ + +static inline int dln2_transfer_rx(struct platform_device *pdev, u16 cmd, + void *ibuf, unsigned *ibuf_len) +{ + return dln2_transfer(pdev, cmd, NULL, 0, ibuf, ibuf_len); +} + +/** + * dln2_transfer_tx - variant of @dln2_transfer() where RX buffer is not needed + * + * @pdev - the sub-device which is issuing this transfer + * @cmd - the command to be sent to the device + * @obuf - the buffer to be sent to the device; it can be NULL if the + * user doesn't need to transmit data with this command + * @obuf_len - the size of the buffer to be sent to the device + * + * @return 0 for success, negative value for errors + */ +static inline int dln2_transfer_tx(struct platform_device *pdev, u16 cmd, + const void *obuf, unsigned obuf_len) +{ + return dln2_transfer(pdev, cmd, obuf, obuf_len, NULL, NULL); +} + +#endif -- cgit v1.2.3 From db23e5001f75304af5345a04901061bdfabcc165 Mon Sep 17 00:00:00 2001 From: Laurentiu Palcu Date: Thu, 6 Nov 2014 15:48:04 +0200 Subject: i2c: add support for Diolan DLN-2 USB-I2C adapter This patch adds support for the Diolan DLN-2 I2C master module. Due to hardware limitations it does not support SMBUS quick commands. Information about the USB protocol interface can be found in the Programmer's Reference Manual [1], see section 6.2.2 for the I2C master module commands and responses. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Laurentiu Palcu Signed-off-by: Octavian Purdila Acked-by: Wolfram Sang Reviewed-by: Johan Hovold [Lee: Fixed some whitespace issues in Kconfig] Signed-off-by: Lee Jones --- drivers/i2c/busses/Kconfig | 10 ++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-dln2.c | 267 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 278 insertions(+) create mode 100644 drivers/i2c/busses/i2c-dln2.c (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 917c3585f45b..b4d135cc2f39 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -881,6 +881,16 @@ config I2C_DIOLAN_U2C This driver can also be built as a module. If so, the module will be called i2c-diolan-u2c. +config I2C_DLN2 + tristate "Diolan DLN-2 USB I2C adapter" + depends on MFD_DLN2 + help + If you say yes to this option, support will be included for Diolan + DLN2, a USB to I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-dln2. + config I2C_PARPORT tristate "Parallel port adapter" depends on PARPORT diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 78d56c54ba2b..cdac7f15eab5 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -87,6 +87,7 @@ obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o +obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c new file mode 100644 index 000000000000..010a5fa8c883 --- /dev/null +++ b/drivers/i2c/busses/i2c-dln2.c @@ -0,0 +1,267 @@ +/* + * Driver for the Diolan DLN-2 USB-I2C adapter + * + * Copyright (c) 2014 Intel Corporation + * + * Derived from: + * i2c-diolan-u2c.c + * Copyright (c) 2010-2011 Ericsson AB + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DLN2_I2C_MODULE_ID 0x03 +#define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID) + +/* I2C commands */ +#define DLN2_I2C_GET_PORT_COUNT DLN2_I2C_CMD(0x00) +#define DLN2_I2C_ENABLE DLN2_I2C_CMD(0x01) +#define DLN2_I2C_DISABLE DLN2_I2C_CMD(0x02) +#define DLN2_I2C_IS_ENABLED DLN2_I2C_CMD(0x03) +#define DLN2_I2C_WRITE DLN2_I2C_CMD(0x06) +#define DLN2_I2C_READ DLN2_I2C_CMD(0x07) +#define DLN2_I2C_SCAN_DEVICES DLN2_I2C_CMD(0x08) +#define DLN2_I2C_PULLUP_ENABLE DLN2_I2C_CMD(0x09) +#define DLN2_I2C_PULLUP_DISABLE DLN2_I2C_CMD(0x0A) +#define DLN2_I2C_PULLUP_IS_ENABLED DLN2_I2C_CMD(0x0B) +#define DLN2_I2C_TRANSFER DLN2_I2C_CMD(0x0C) +#define DLN2_I2C_SET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0D) +#define DLN2_I2C_GET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0E) + +#define DLN2_I2C_MAX_XFER_SIZE 256 +#define DLN2_I2C_BUF_SIZE (DLN2_I2C_MAX_XFER_SIZE + 16) + +struct dln2_i2c { + struct platform_device *pdev; + struct i2c_adapter adapter; + u8 port; + /* + * Buffer to hold the packet for read or write transfers. One is enough + * since we can't have multiple transfers in parallel on the i2c bus. + */ + void *buf; +}; + +static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable) +{ + int ret; + u16 cmd; + struct { + u8 port; + } tx; + + tx.port = dln2->port; + + if (enable) + cmd = DLN2_I2C_ENABLE; + else + cmd = DLN2_I2C_DISABLE; + + ret = dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx)); + if (ret < 0) + return ret; + + return 0; +} + +static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr, + u8 *data, u16 data_len) +{ + int ret; + struct { + u8 port; + u8 addr; + u8 mem_addr_len; + __le32 mem_addr; + __le16 buf_len; + u8 buf[DLN2_I2C_MAX_XFER_SIZE]; + } __packed *tx = dln2->buf; + unsigned len; + + BUILD_BUG_ON(sizeof(*tx) > DLN2_I2C_BUF_SIZE); + + tx->port = dln2->port; + tx->addr = addr; + tx->mem_addr_len = 0; + tx->mem_addr = 0; + tx->buf_len = cpu_to_le16(data_len); + memcpy(tx->buf, data, data_len); + + len = sizeof(*tx) + data_len - DLN2_I2C_MAX_XFER_SIZE; + ret = dln2_transfer_tx(dln2->pdev, DLN2_I2C_WRITE, tx, len); + if (ret < 0) + return ret; + + return data_len; +} + +static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data, + u16 data_len) +{ + int ret; + struct { + u8 port; + u8 addr; + u8 mem_addr_len; + __le32 mem_addr; + __le16 buf_len; + } __packed tx; + struct { + __le16 buf_len; + u8 buf[DLN2_I2C_MAX_XFER_SIZE]; + } __packed *rx = dln2->buf; + unsigned rx_len = sizeof(*rx); + + BUILD_BUG_ON(sizeof(*rx) > DLN2_I2C_BUF_SIZE); + + tx.port = dln2->port; + tx.addr = addr; + tx.mem_addr_len = 0; + tx.mem_addr = 0; + tx.buf_len = cpu_to_le16(data_len); + + ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx), + rx, &rx_len); + if (ret < 0) + return ret; + if (rx_len < sizeof(rx->buf_len) + data_len) + return -EPROTO; + if (le16_to_cpu(rx->buf_len) != data_len) + return -EPROTO; + + memcpy(data, rx->buf, data_len); + + return data_len; +} + +static int dln2_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct dln2_i2c *dln2 = i2c_get_adapdata(adapter); + struct i2c_msg *pmsg; + struct device *dev = &dln2->adapter.dev; + int i; + + for (i = 0; i < num; i++) { + int ret; + + pmsg = &msgs[i]; + + if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) { + dev_warn(dev, "maximum transfer size exceeded\n"); + return -EOPNOTSUPP; + } + + if (pmsg->flags & I2C_M_RD) { + ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf, + pmsg->len); + if (ret < 0) + return ret; + + pmsg->len = ret; + } else { + ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf, + pmsg->len); + if (ret != pmsg->len) + return -EPROTO; + } + } + + return num; +} + +static u32 dln2_i2c_func(struct i2c_adapter *a) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static const struct i2c_algorithm dln2_i2c_usb_algorithm = { + .master_xfer = dln2_i2c_xfer, + .functionality = dln2_i2c_func, +}; + +static int dln2_i2c_probe(struct platform_device *pdev) +{ + int ret; + struct dln2_i2c *dln2; + struct device *dev = &pdev->dev; + struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev); + + dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL); + if (!dln2) + return -ENOMEM; + + dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL); + if (!dln2->buf) + return -ENOMEM; + + dln2->pdev = pdev; + dln2->port = pdata->port; + + /* setup i2c adapter description */ + dln2->adapter.owner = THIS_MODULE; + dln2->adapter.class = I2C_CLASS_HWMON; + dln2->adapter.algo = &dln2_i2c_usb_algorithm; + dln2->adapter.dev.parent = dev; + i2c_set_adapdata(&dln2->adapter, dln2); + snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d", + "dln2-i2c", dev_name(pdev->dev.parent), dln2->port); + + platform_set_drvdata(pdev, dln2); + + /* initialize the i2c interface */ + ret = dln2_i2c_enable(dln2, true); + if (ret < 0) { + dev_err(dev, "failed to initialize adapter: %d\n", ret); + return ret; + } + + /* and finally attach to i2c layer */ + ret = i2c_add_adapter(&dln2->adapter); + if (ret < 0) { + dev_err(dev, "failed to add I2C adapter: %d\n", ret); + goto out_disable; + } + + return 0; + +out_disable: + dln2_i2c_enable(dln2, false); + + return ret; +} + +static int dln2_i2c_remove(struct platform_device *pdev) +{ + struct dln2_i2c *dln2 = platform_get_drvdata(pdev); + + i2c_del_adapter(&dln2->adapter); + dln2_i2c_enable(dln2, false); + + return 0; +} + +static struct platform_driver dln2_i2c_driver = { + .driver.name = "dln2-i2c", + .probe = dln2_i2c_probe, + .remove = dln2_i2c_remove, +}; + +module_platform_driver(dln2_i2c_driver); + +MODULE_AUTHOR("Laurentiu Palcu "); +MODULE_DESCRIPTION("Driver for the Diolan DLN2 I2C master interface"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dln2-i2c"); -- cgit v1.2.3 From 6732127f62a7635db072294c74795a20a8996db2 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Thu, 6 Nov 2014 15:48:05 +0200 Subject: gpio: add support for the Diolan DLN-2 USB GPIO driver This patch adds GPIO and IRQ support for the Diolan DLN-2 GPIO module. Information about the USB protocol interface can be found in the Programmer's Reference Manual [1], see section 2.9 for the GPIO module commands and responses. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Daniel Baluta Signed-off-by: Octavian Purdila Acked-by: Linus Walleij Reviewed-by: Johan Hovold Signed-off-by: Lee Jones --- drivers/gpio/Kconfig | 12 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-dln2.c | 553 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 566 insertions(+) create mode 100644 drivers/gpio/gpio-dln2.c (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0959ca9b6b27..23dfd5f59b39 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -905,4 +905,16 @@ config GPIO_VIPERBOARD River Tech's viperboard.h for detailed meaning of the module parameters. +config GPIO_DLN2 + tristate "Diolan DLN2 GPIO support" + depends on MFD_DLN2 + select GPIOLIB_IRQCHIP + + help + Select this option to enable GPIO driver for the Diolan DLN2 + board. + + This driver can also be built as a module. If so, the module + will be called gpio-dln2. + endif diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index e5d346cf3b6e..e60677b8ccb4 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o +obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o obj-$(CONFIG_GPIO_EM) += gpio-em.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c new file mode 100644 index 000000000000..978b51eae2ec --- /dev/null +++ b/drivers/gpio/gpio-dln2.c @@ -0,0 +1,553 @@ +/* + * Driver for the Diolan DLN-2 USB-GPIO adapter + * + * Copyright (c) 2014 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DLN2_GPIO_ID 0x01 + +#define DLN2_GPIO_GET_PIN_COUNT DLN2_CMD(0x01, DLN2_GPIO_ID) +#define DLN2_GPIO_SET_DEBOUNCE DLN2_CMD(0x04, DLN2_GPIO_ID) +#define DLN2_GPIO_GET_DEBOUNCE DLN2_CMD(0x05, DLN2_GPIO_ID) +#define DLN2_GPIO_PORT_GET_VAL DLN2_CMD(0x06, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_VAL DLN2_CMD(0x0B, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_OUT_VAL DLN2_CMD(0x0C, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_OUT_VAL DLN2_CMD(0x0D, DLN2_GPIO_ID) +#define DLN2_GPIO_CONDITION_MET_EV DLN2_CMD(0x0F, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_ENABLE DLN2_CMD(0x10, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_DISABLE DLN2_CMD(0x11, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_DIRECTION DLN2_CMD(0x13, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_DIRECTION DLN2_CMD(0x14, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_SET_EVENT_CFG DLN2_CMD(0x1E, DLN2_GPIO_ID) +#define DLN2_GPIO_PIN_GET_EVENT_CFG DLN2_CMD(0x1F, DLN2_GPIO_ID) + +#define DLN2_GPIO_EVENT_NONE 0 +#define DLN2_GPIO_EVENT_CHANGE 1 +#define DLN2_GPIO_EVENT_LVL_HIGH 2 +#define DLN2_GPIO_EVENT_LVL_LOW 3 +#define DLN2_GPIO_EVENT_CHANGE_RISING 0x11 +#define DLN2_GPIO_EVENT_CHANGE_FALLING 0x21 +#define DLN2_GPIO_EVENT_MASK 0x0F + +#define DLN2_GPIO_MAX_PINS 32 + +struct dln2_irq_work { + struct work_struct work; + struct dln2_gpio *dln2; + int pin; + int type; +}; + +struct dln2_gpio { + struct platform_device *pdev; + struct gpio_chip gpio; + + /* + * Cache pin direction to save us one transfer, since the hardware has + * separate commands to read the in and out values. + */ + DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS); + + DECLARE_BITMAP(irqs_masked, DLN2_GPIO_MAX_PINS); + DECLARE_BITMAP(irqs_enabled, DLN2_GPIO_MAX_PINS); + DECLARE_BITMAP(irqs_pending, DLN2_GPIO_MAX_PINS); + struct dln2_irq_work *irq_work; +}; + +struct dln2_gpio_pin { + __le16 pin; +}; + +struct dln2_gpio_pin_val { + __le16 pin __packed; + u8 value; +}; + +static int dln2_gpio_get_pin_count(struct platform_device *pdev) +{ + int ret; + __le16 count; + int len = sizeof(count); + + ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len); + if (ret < 0) + return ret; + if (len < sizeof(count)) + return -EPROTO; + + return le16_to_cpu(count); +} + +static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin) +{ + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(pin), + }; + + return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req)); +} + +static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin) +{ + int ret; + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(pin), + }; + struct dln2_gpio_pin_val rsp; + int len = sizeof(rsp); + + ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len); + if (ret < 0) + return ret; + if (len < sizeof(rsp) || req.pin != rsp.pin) + return -EPROTO; + + return rsp.value; +} + +static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin) +{ + int ret; + + ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin); + if (ret < 0) + return ret; + return !!ret; +} + +static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin) +{ + int ret; + + ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin); + if (ret < 0) + return ret; + return !!ret; +} + +static void dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2, + unsigned int pin, int value) +{ + struct dln2_gpio_pin_val req = { + .pin = cpu_to_le16(pin), + .value = value, + }; + + dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req, + sizeof(req)); +} + +#define DLN2_GPIO_DIRECTION_IN 0 +#define DLN2_GPIO_DIRECTION_OUT 1 + +static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + struct dln2_gpio_pin req = { + .pin = cpu_to_le16(offset), + }; + struct dln2_gpio_pin_val rsp; + int len = sizeof(rsp); + int ret; + + ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset); + if (ret < 0) + return ret; + + /* cache the pin direction */ + ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION, + &req, sizeof(req), &rsp, &len); + if (ret < 0) + return ret; + if (len < sizeof(rsp) || req.pin != rsp.pin) { + ret = -EPROTO; + goto out_disable; + } + + switch (rsp.value) { + case DLN2_GPIO_DIRECTION_IN: + clear_bit(offset, dln2->output_enabled); + return 0; + case DLN2_GPIO_DIRECTION_OUT: + set_bit(offset, dln2->output_enabled); + return 0; + default: + ret = -EPROTO; + goto out_disable; + } + +out_disable: + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset); + return ret; +} + +static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + + dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset); +} + +static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + + if (test_bit(offset, dln2->output_enabled)) + return GPIOF_DIR_OUT; + + return GPIOF_DIR_IN; +} + +static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + int dir; + + dir = dln2_gpio_get_direction(chip, offset); + if (dir < 0) + return dir; + + if (dir == GPIOF_DIR_IN) + return dln2_gpio_pin_get_in_val(dln2, offset); + + return dln2_gpio_pin_get_out_val(dln2, offset); +} + +static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + + dln2_gpio_pin_set_out_val(dln2, offset, value); +} + +static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset, + unsigned dir) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + struct dln2_gpio_pin_val req = { + .pin = cpu_to_le16(offset), + .value = dir, + }; + int ret; + + ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION, + &req, sizeof(req)); + if (ret < 0) + return ret; + + if (dir == DLN2_GPIO_DIRECTION_OUT) + set_bit(offset, dln2->output_enabled); + else + clear_bit(offset, dln2->output_enabled); + + return ret; +} + +static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN); +} + +static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT); +} + +static int dln2_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio); + __le32 duration = cpu_to_le32(debounce); + + return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE, + &duration, sizeof(duration)); +} + +static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin, + unsigned type, unsigned period) +{ + struct { + __le16 pin; + u8 type; + __le16 period; + } __packed req = { + .pin = cpu_to_le16(pin), + .type = type, + .period = cpu_to_le16(period), + }; + + return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG, + &req, sizeof(req)); +} + +static void dln2_irq_work(struct work_struct *w) +{ + struct dln2_irq_work *iw = container_of(w, struct dln2_irq_work, work); + struct dln2_gpio *dln2 = iw->dln2; + u8 type = iw->type & DLN2_GPIO_EVENT_MASK; + + if (test_bit(iw->pin, dln2->irqs_enabled)) + dln2_gpio_set_event_cfg(dln2, iw->pin, type, 0); + else + dln2_gpio_set_event_cfg(dln2, iw->pin, DLN2_GPIO_EVENT_NONE, 0); +} + +static void dln2_irq_enable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + set_bit(pin, dln2->irqs_enabled); + schedule_work(&dln2->irq_work[pin].work); +} + +static void dln2_irq_disable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + clear_bit(pin, dln2->irqs_enabled); + schedule_work(&dln2->irq_work[pin].work); +} + +static void dln2_irq_mask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + set_bit(pin, dln2->irqs_masked); +} + +static void dln2_irq_unmask(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + struct device *dev = dln2->gpio.dev; + int pin = irqd_to_hwirq(irqd); + + if (test_and_clear_bit(pin, dln2->irqs_pending)) { + int irq; + + irq = irq_find_mapping(dln2->gpio.irqdomain, pin); + if (!irq) { + dev_err(dev, "pin %d not mapped to IRQ\n", pin); + return; + } + + generic_handle_irq(irq); + } +} + +static int dln2_irq_set_type(struct irq_data *irqd, unsigned type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio); + int pin = irqd_to_hwirq(irqd); + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_LOW; + break; + case IRQ_TYPE_EDGE_BOTH: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE; + break; + case IRQ_TYPE_EDGE_RISING: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_FALLING; + break; + default: + return -EINVAL; + } + + return 0; +} + +static struct irq_chip dln2_gpio_irqchip = { + .name = "dln2-irq", + .irq_enable = dln2_irq_enable, + .irq_disable = dln2_irq_disable, + .irq_mask = dln2_irq_mask, + .irq_unmask = dln2_irq_unmask, + .irq_set_type = dln2_irq_set_type, +}; + +static void dln2_gpio_event(struct platform_device *pdev, u16 echo, + const void *data, int len) +{ + int pin, irq; + const struct { + __le16 count; + __u8 type; + __le16 pin; + __u8 value; + } __packed *event = data; + struct dln2_gpio *dln2 = platform_get_drvdata(pdev); + + if (len < sizeof(*event)) { + dev_err(dln2->gpio.dev, "short event message\n"); + return; + } + + pin = le16_to_cpu(event->pin); + if (pin >= dln2->gpio.ngpio) { + dev_err(dln2->gpio.dev, "out of bounds pin %d\n", pin); + return; + } + + irq = irq_find_mapping(dln2->gpio.irqdomain, pin); + if (!irq) { + dev_err(dln2->gpio.dev, "pin %d not mapped to IRQ\n", pin); + return; + } + + if (!test_bit(pin, dln2->irqs_enabled)) + return; + if (test_bit(pin, dln2->irqs_masked)) { + set_bit(pin, dln2->irqs_pending); + return; + } + + switch (dln2->irq_work[pin].type) { + case DLN2_GPIO_EVENT_CHANGE_RISING: + if (event->value) + generic_handle_irq(irq); + break; + case DLN2_GPIO_EVENT_CHANGE_FALLING: + if (!event->value) + generic_handle_irq(irq); + break; + default: + generic_handle_irq(irq); + } +} + +static int dln2_gpio_probe(struct platform_device *pdev) +{ + struct dln2_gpio *dln2; + struct device *dev = &pdev->dev; + int pins; + int i, ret; + + pins = dln2_gpio_get_pin_count(pdev); + if (pins < 0) { + dev_err(dev, "failed to get pin count: %d\n", pins); + return pins; + } + if (pins > DLN2_GPIO_MAX_PINS) { + pins = DLN2_GPIO_MAX_PINS; + dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS); + } + + dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL); + if (!dln2) + return -ENOMEM; + + dln2->irq_work = devm_kcalloc(&pdev->dev, pins, + sizeof(struct dln2_irq_work), GFP_KERNEL); + if (!dln2->irq_work) + return -ENOMEM; + for (i = 0; i < pins; i++) { + INIT_WORK(&dln2->irq_work[i].work, dln2_irq_work); + dln2->irq_work[i].pin = i; + dln2->irq_work[i].dln2 = dln2; + } + + dln2->pdev = pdev; + + dln2->gpio.label = "dln2"; + dln2->gpio.dev = dev; + dln2->gpio.owner = THIS_MODULE; + dln2->gpio.base = -1; + dln2->gpio.ngpio = pins; + dln2->gpio.exported = true; + dln2->gpio.can_sleep = true; + dln2->gpio.irq_not_threaded = true; + dln2->gpio.set = dln2_gpio_set; + dln2->gpio.get = dln2_gpio_get; + dln2->gpio.request = dln2_gpio_request; + dln2->gpio.free = dln2_gpio_free; + dln2->gpio.get_direction = dln2_gpio_get_direction; + dln2->gpio.direction_input = dln2_gpio_direction_input; + dln2->gpio.direction_output = dln2_gpio_direction_output; + dln2->gpio.set_debounce = dln2_gpio_set_debounce; + + platform_set_drvdata(pdev, dln2); + + ret = gpiochip_add(&dln2->gpio); + if (ret < 0) { + dev_err(dev, "failed to add gpio chip: %d\n", ret); + goto out; + } + + ret = gpiochip_irqchip_add(&dln2->gpio, &dln2_gpio_irqchip, 0, + handle_simple_irq, IRQ_TYPE_NONE); + if (ret < 0) { + dev_err(dev, "failed to add irq chip: %d\n", ret); + goto out_gpiochip_remove; + } + + ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV, + dln2_gpio_event); + if (ret) { + dev_err(dev, "failed to register event cb: %d\n", ret); + goto out_gpiochip_remove; + } + + return 0; + +out_gpiochip_remove: + gpiochip_remove(&dln2->gpio); +out: + return ret; +} + +static int dln2_gpio_remove(struct platform_device *pdev) +{ + struct dln2_gpio *dln2 = platform_get_drvdata(pdev); + int i; + + dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV); + for (i = 0; i < dln2->gpio.ngpio; i++) + flush_work(&dln2->irq_work[i].work); + gpiochip_remove(&dln2->gpio); + + return 0; +} + +static struct platform_driver dln2_gpio_driver = { + .driver.name = "dln2-gpio", + .probe = dln2_gpio_probe, + .remove = dln2_gpio_remove, +}; + +module_platform_driver(dln2_gpio_driver); + +MODULE_AUTHOR("Daniel Baluta Date: Tue, 11 Nov 2014 11:30:08 -0800 Subject: iio: adc: Add module device table for autoloading Add the module device id table so that the driver can be automatically loaded once the platform device is created. Signed-off-by: Aaron Lu Signed-off-by: Jacob Pan Acked-by: Jonathan Cameron Signed-off-by: Lee Jones --- drivers/iio/adc/axp288_adc.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 480028618a84..4a6cf43df46a 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -238,15 +238,23 @@ static int axp288_adc_remove(struct platform_device *pdev) return 0; } +static struct platform_device_id axp288_adc_id_table[] = { + { .name = "axp288_adc" }, + {}, +}; + static struct platform_driver axp288_adc_driver = { .probe = axp288_adc_probe, .remove = axp288_adc_remove, + .id_table = axp288_adc_id_table, .driver = { .name = "axp288_adc", .owner = THIS_MODULE, }, }; +MODULE_DEVICE_TABLE(platform, axp288_adc_id_table); + module_platform_driver(axp288_adc_driver); MODULE_AUTHOR("Jacob Pan "); -- cgit v1.2.3 From ff3bbc5c637ab0843b3a9df717b6cca4e8243f0c Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 11 Nov 2014 11:30:09 -0800 Subject: mfd/axp20x: avoid irq numbering collision IRQ numbers in axp20x devices are defined with high-order bit first in each IRQ enable/status registers. On Intel platforms it is more common to number IRQs with least significant bit first. Therefore, sharing IRQ# between the two is very difficult. Since AXP288 is a customized PMIC for Intel platform and the amount of shared IRQs are very small, we use separate IRQ numbering. This also fixes collision and a duplicate in WBTO interrupt. e.g. For the 16 interrupts controlled in IRQ enabled registers 1 & 2, on axp20x for ARM, the PMIC local IRQ numbers and register bits are mapped as: IRQ#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 --------------------------------------------------------- ARM: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Intel: 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 Signed-off-by: Todd Brandt Signed-off-by: Jacob Pan Acked-by: Jonathan Cameron Signed-off-by: Lee Jones --- drivers/mfd/axp20x.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index b2fb7f492c86..9c4714e13c3c 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -183,21 +183,21 @@ static const struct regmap_irq axp20x_regmap_irqs[] = { /* some IRQs are compatible with axp20x models */ static const struct regmap_irq axp288_regmap_irqs[] = { - INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), - INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), - INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), + INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), + INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3), + INIT_REGMAP_IRQ(AXP288, OV, 0, 4), - INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), - INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP288, DONE, 1, 2), + INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3), INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4), INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5), - INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), - INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), + INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6), + INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7), INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0), INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1), INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2), - INIT_REGMAP_IRQ(AXP288, WBTU, 2, 3), + INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3), INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4), INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5), INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6), @@ -215,7 +215,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP288, POKS, 4, 4), INIT_REGMAP_IRQ(AXP288, POKN, 4, 5), INIT_REGMAP_IRQ(AXP288, POKP, 4, 6), - INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), + INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7), INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0), INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), -- cgit v1.2.3 From 8019f6962708985782b65bd97be88046a55e1e4d Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 11 Nov 2014 11:30:10 -0800 Subject: iio/axp288_adc: remove THIS_MODULE owner This is no longer needed in that platform driver_register will do it. Signed-off-by: Jacob Pan Acked-by: Jonathan Cameron Signed-off-by: Lee Jones --- drivers/iio/adc/axp288_adc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 4a6cf43df46a..08bcfb061ca5 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -249,7 +249,6 @@ static struct platform_driver axp288_adc_driver = { .id_table = axp288_adc_id_table, .driver = { .name = "axp288_adc", - .owner = THIS_MODULE, }, }; -- cgit v1.2.3 From 7ca2b1c6724b150d8305ce06e4b07904ecbcb3fb Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Tue, 18 Nov 2014 14:57:57 +0200 Subject: mfd: dln2: Fix _dln2_transfer return code If wait_for_completion_interruptible_timeout returns a positive value it may be propagated as the return value of _dln2_transfer. This contradicts the documentation of the function and exposes unnecessary internals to the callers. This patch makes sure to set the return value to 0 in that case. Reported-by: Julia Lawall Signed-off-by: Octavian Purdila Signed-off-by: Lee Jones --- drivers/mfd/dln2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index 9765a174d2c5..cf22841c1e3c 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -462,6 +462,8 @@ static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, if (!ret) ret = -ETIMEDOUT; goto out_free_rx_slot; + } else { + ret = 0; } if (dln2->disconnect) { @@ -484,10 +486,8 @@ static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, goto out_free_rx_slot; } - if (!ibuf) { - ret = 0; + if (!ibuf) goto out_free_rx_slot; - } if (*ibuf_len > rsp->hdr.size - sizeof(*rsp)) *ibuf_len = rsp->hdr.size - sizeof(*rsp); -- cgit v1.2.3 From 9331642812b19313ca4c545b37c001d68efb7022 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Tue, 18 Nov 2014 14:57:58 +0200 Subject: i2c: dln2: Simplify return flow for dln2_i2c_enable This fixes the following kbuild test robot warning: >> drivers/i2c/busses/i2c-dln2.c:70:1-4: WARNING: end returns can be simplified if negative or 0 value Reported-by: kbuild test robot Reported-by: Julia Lawall Signed-off-by: Octavian Purdila Acked-by: Wolfram Sang Signed-off-by: Lee Jones --- drivers/i2c/busses/i2c-dln2.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c index 010a5fa8c883..b3fb86af4cbb 100644 --- a/drivers/i2c/busses/i2c-dln2.c +++ b/drivers/i2c/busses/i2c-dln2.c @@ -54,7 +54,6 @@ struct dln2_i2c { static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable) { - int ret; u16 cmd; struct { u8 port; @@ -67,11 +66,7 @@ static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable) else cmd = DLN2_I2C_DISABLE; - ret = dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx)); - if (ret < 0) - return ret; - - return 0; + return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx)); } static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr, -- cgit v1.2.3 From 00ee7a37fdc3ed9bc6315f8af0270f2df55437d7 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Tue, 18 Nov 2014 14:57:59 +0200 Subject: mfd: dln2: Add a limit check for invalid echo The echo field in dln2_transfer_complete comes directly from an USB transfer and we should not trust it is valid. Reported-by: Dan Carpenter Signed-off-by: Octavian Purdila Signed-off-by: Lee Jones --- drivers/mfd/dln2.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index cf22841c1e3c..df2fda9cd3db 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -195,6 +195,9 @@ static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb, struct dln2_rx_context *rxc; bool valid_slot = false; + if (rx_slot >= DLN2_MAX_RX_SLOTS) + goto out; + rxc = &rxs->slots[rx_slot]; /* @@ -210,6 +213,7 @@ static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb, } spin_unlock(&rxs->lock); +out: if (!valid_slot) dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot); -- cgit v1.2.3 From 2fc2b4846c14c8c2d2c6e9114b4548f846521cfb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 18 Nov 2014 14:58:00 +0200 Subject: mfd: dln2: A couple endian fixes Sparse catches a couple endian bugs. Signed-off-by: Dan Carpenter Acked-by: Octavian Purdila Signed-off-by: Lee Jones --- drivers/mfd/dln2.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index df2fda9cd3db..559e6cc3e022 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -436,6 +436,7 @@ static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, struct device *dev = &dln2->interface->dev; const unsigned long timeout = DLN2_USB_TIMEOUT * HZ / 1000; struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle]; + int size; spin_lock(&dln2->disconnect_lock); if (!dln2->disconnect) @@ -477,8 +478,9 @@ static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, /* if we got here we know that the response header has been checked */ rsp = rxc->urb->transfer_buffer; + size = le16_to_cpu(rsp->hdr.size); - if (rsp->hdr.size < sizeof(*rsp)) { + if (size < sizeof(*rsp)) { ret = -EPROTO; goto out_free_rx_slot; } @@ -493,8 +495,8 @@ static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, if (!ibuf) goto out_free_rx_slot; - if (*ibuf_len > rsp->hdr.size - sizeof(*rsp)) - *ibuf_len = rsp->hdr.size - sizeof(*rsp); + if (*ibuf_len > size - sizeof(*rsp)) + *ibuf_len = size - sizeof(*rsp); memcpy(ibuf, rsp + 1, *ibuf_len); -- cgit v1.2.3 From 3bc2ee91a470c52fb3979c23c12d43283455f10d Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 18 Nov 2014 17:59:39 +0900 Subject: mfd: sec-core: Add support for S2MPS13 device This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD driver. The S2MPS13 is very similar with existing S2MPS14 and includes PMIC/ RTC/CLOCK devices. Signed-off-by: Chanwoo Choi Acked-by: Sangbeom Kim Signed-off-by: Lee Jones --- drivers/mfd/sec-core.c | 16 ++++++++++++++++ drivers/mfd/sec-irq.c | 23 +++++++++++++++++------ include/linux/mfd/samsung/core.h | 1 + 3 files changed, 34 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index dba7e2b6f8e9..d086e8cee1d7 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -74,6 +74,15 @@ static const struct mfd_cell s2mps11_devs[] = { } }; +static const struct mfd_cell s2mps13_devs[] = { + { .name = "s2mps13-pmic", }, + { .name = "s2mps13-rtc", }, + { + .name = "s2mps13-clk", + .of_compatible = "samsung,s2mps13-clk", + }, +}; + static const struct mfd_cell s2mps14_devs[] = { { .name = "s2mps14-pmic", @@ -107,6 +116,9 @@ static const struct of_device_id sec_dt_match[] = { }, { .compatible = "samsung,s2mps11-pmic", .data = (void *)S2MPS11X, + }, { + .compatible = "samsung,s2mps13-pmic", + .data = (void *)S2MPS13X, }, { .compatible = "samsung,s2mps14-pmic", .data = (void *)S2MPS14X, @@ -378,6 +390,10 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_devs = s2mps11_devs; num_sec_devs = ARRAY_SIZE(s2mps11_devs); break; + case S2MPS13X: + sec_devs = s2mps13_devs; + num_sec_devs = ARRAY_SIZE(s2mps13_devs); + break; case S2MPS14X: sec_devs = s2mps14_devs; num_sec_devs = ARRAY_SIZE(s2mps14_devs); diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index f9a57869e3ec..ba86a918c2da 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -389,14 +389,22 @@ static const struct regmap_irq_chip s2mps11_irq_chip = { .ack_base = S2MPS11_REG_INT1, }; +#define S2MPS1X_IRQ_CHIP_COMMON_DATA \ + .irqs = s2mps14_irqs, \ + .num_irqs = ARRAY_SIZE(s2mps14_irqs), \ + .num_regs = 3, \ + .status_base = S2MPS14_REG_INT1, \ + .mask_base = S2MPS14_REG_INT1M, \ + .ack_base = S2MPS14_REG_INT1 \ + +static const struct regmap_irq_chip s2mps13_irq_chip = { + .name = "s2mps13", + S2MPS1X_IRQ_CHIP_COMMON_DATA, +}; + static const struct regmap_irq_chip s2mps14_irq_chip = { .name = "s2mps14", - .irqs = s2mps14_irqs, - .num_irqs = ARRAY_SIZE(s2mps14_irqs), - .num_regs = 3, - .status_base = S2MPS14_REG_INT1, - .mask_base = S2MPS14_REG_INT1M, - .ack_base = S2MPS14_REG_INT1, + S2MPS1X_IRQ_CHIP_COMMON_DATA, }; static const struct regmap_irq_chip s2mpu02_irq_chip = { @@ -452,6 +460,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) case S2MPS11X: sec_irq_chip = &s2mps11_irq_chip; break; + case S2MPS13X: + sec_irq_chip = &s2mps13_irq_chip; + break; case S2MPS14X: sec_irq_chip = &s2mps14_irq_chip; break; diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 1825edacbda7..0c0343e06ba6 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -41,6 +41,7 @@ enum sec_device_type { S5M8767X, S2MPA01, S2MPS11X, + S2MPS13X, S2MPS14X, S2MPU02, }; -- cgit v1.2.3 From 76b9840b24ae049b39f1b3cf0e49f21b7c41748f Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 18 Nov 2014 17:59:40 +0900 Subject: regulator: s2mps11: Add support S2MPS13 regulator device This patch adds S2MPS13 regulator device to existing S2MPS11 device driver. The S2MPS13 has just different number of regulators from S2MPS14. The S2MPS13 regulator device includes LDO[1-40] and BUCK[1-10]. Signed-off-by: Chanwoo Choi Acked-by: Sangbeom Kim Acked-by: Mark Brown Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- drivers/mfd/sec-core.c | 13 +++ drivers/regulator/Kconfig | 10 +- drivers/regulator/s2mps11.c | 102 +++++++++++++++++++- include/linux/mfd/samsung/core.h | 1 + include/linux/mfd/samsung/s2mps13.h | 186 ++++++++++++++++++++++++++++++++++++ 5 files changed, 304 insertions(+), 8 deletions(-) create mode 100644 include/linux/mfd/samsung/s2mps13.h (limited to 'drivers') diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index d086e8cee1d7..b39960532f76 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -206,6 +207,15 @@ static const struct regmap_config s2mps11_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static const struct regmap_config s2mps13_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS13_REG_LDODSCH5, + .volatile_reg = s2mps11_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s2mps14_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -337,6 +347,9 @@ static int sec_pmic_probe(struct i2c_client *i2c, case S2MPS11X: regmap = &s2mps11_regmap_config; break; + case S2MPS13X: + regmap = &s2mps13_regmap_config; + break; case S2MPS14X: regmap = &s2mps14_regmap_config; break; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 55d7b7b0f2e0..5e061347be93 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -529,13 +529,13 @@ config REGULATOR_S2MPA01 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator" + tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output - regulator via I2C bus. The chip is comprised of high efficient Buck - converters including Dual-Phase Buck converter, Buck-Boost converter, - various LDOs. + This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage + output regulator via I2C bus. The chip is comprised of high efficient + Buck converters including Dual-Phase Buck converter, Buck-Boost + converter, various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index adab82d5279f..738dc7763d47 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -45,10 +46,10 @@ struct s2mps11_info { enum sec_device_type dev_type; /* - * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode - * was enabled. + * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether + * the suspend mode was enabled. */ - unsigned long long s2mps14_suspend_state:35; + unsigned long long s2mps14_suspend_state:50; /* Array of size rdev_num with GPIO-s for external sleep control */ int *ext_control_gpio; @@ -369,12 +370,101 @@ static const struct regulator_desc s2mps11_regulators[] = { regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV), }; +static struct regulator_ops s2mps14_reg_ops; + +#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \ + .name = "LDO"#num, \ + .id = S2MPS13_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = min, \ + .uV_step = step, \ + .linear_min_sel = min_sel, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS13_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \ + .name = "BUCK"#num, \ + .id = S2MPS13_BUCK##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = min, \ + .uV_step = step, \ + .linear_min_sel = min_sel, \ + .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \ + .vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \ + .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +static const struct regulator_desc s2mps13_regulators[] = { + regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(7, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(8, MIN_1000_MV, STEP_12_5_MV, 0x20), + regulator_desc_s2mps13_buck(9, MIN_1000_MV, STEP_12_5_MV, 0x20), + regulator_desc_s2mps13_buck(10, MIN_500_MV, STEP_6_25_MV, 0x10), +}; + static int s2mps14_regulator_enable(struct regulator_dev *rdev) { struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); unsigned int val; switch (s2mps11->dev_type) { + case S2MPS13X: case S2MPS14X: if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev))) val = S2MPS14_ENABLE_SUSPEND; @@ -406,6 +496,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev) /* Below LDO should be always on or does not support suspend mode. */ switch (s2mps11->dev_type) { + case S2MPS13X: case S2MPS14X: switch (rdev_id) { case S2MPS14_LDO3: @@ -831,6 +922,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators); regulators = s2mps11_regulators; break; + case S2MPS13X: + s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators); + regulators = s2mps13_regulators; + break; case S2MPS14X: s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators); regulators = s2mps14_regulators; @@ -927,6 +1022,7 @@ out: static const struct platform_device_id s2mps11_pmic_id[] = { { "s2mps11-pmic", S2MPS11X}, + { "s2mps13-pmic", S2MPS13X}, { "s2mps14-pmic", S2MPS14X}, { "s2mpu02-pmic", S2MPU02}, { }, diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 0c0343e06ba6..3fdb7cfbffb3 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -28,6 +28,7 @@ #define MIN_800_MV 800000 #define MIN_750_MV 750000 #define MIN_600_MV 600000 +#define MIN_500_MV 500000 /* Macros to represent steps for LDO/BUCK */ #define STEP_50_MV 50000 diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h new file mode 100644 index 000000000000..ce5dda8958fe --- /dev/null +++ b/include/linux/mfd/samsung/s2mps13.h @@ -0,0 +1,186 @@ +/* + * s2mps13.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_MFD_S2MPS13_H +#define __LINUX_MFD_S2MPS13_H + +/* S2MPS13 registers */ +enum s2mps13_reg { + S2MPS13_REG_ID, + S2MPS13_REG_INT1, + S2MPS13_REG_INT2, + S2MPS13_REG_INT3, + S2MPS13_REG_INT1M, + S2MPS13_REG_INT2M, + S2MPS13_REG_INT3M, + S2MPS13_REG_ST1, + S2MPS13_REG_ST2, + S2MPS13_REG_PWRONSRC, + S2MPS13_REG_OFFSRC, + S2MPS13_REG_BU_CHG, + S2MPS13_REG_RTCCTRL, + S2MPS13_REG_CTRL1, + S2MPS13_REG_CTRL2, + S2MPS13_REG_RSVD1, + S2MPS13_REG_RSVD2, + S2MPS13_REG_RSVD3, + S2MPS13_REG_RSVD4, + S2MPS13_REG_RSVD5, + S2MPS13_REG_RSVD6, + S2MPS13_REG_CTRL3, + S2MPS13_REG_RSVD7, + S2MPS13_REG_RSVD8, + S2MPS13_REG_WRSTBI, + S2MPS13_REG_B1CTRL, + S2MPS13_REG_B1OUT, + S2MPS13_REG_B2CTRL, + S2MPS13_REG_B2OUT, + S2MPS13_REG_B3CTRL, + S2MPS13_REG_B3OUT, + S2MPS13_REG_B4CTRL, + S2MPS13_REG_B4OUT, + S2MPS13_REG_B5CTRL, + S2MPS13_REG_B5OUT, + S2MPS13_REG_B6CTRL, + S2MPS13_REG_B6OUT, + S2MPS13_REG_B7CTRL, + S2MPS13_REG_B7OUT, + S2MPS13_REG_B8CTRL, + S2MPS13_REG_B8OUT, + S2MPS13_REG_B9CTRL, + S2MPS13_REG_B9OUT, + S2MPS13_REG_B10CTRL, + S2MPS13_REG_B10OUT, + S2MPS13_REG_BB1CTRL, + S2MPS13_REG_BB1OUT, + S2MPS13_REG_BUCK_RAMP1, + S2MPS13_REG_BUCK_RAMP2, + S2MPS13_REG_LDO_DVS1, + S2MPS13_REG_LDO_DVS2, + S2MPS13_REG_LDO_DVS3, + S2MPS13_REG_B6OUT2, + S2MPS13_REG_L1CTRL, + S2MPS13_REG_L2CTRL, + S2MPS13_REG_L3CTRL, + S2MPS13_REG_L4CTRL, + S2MPS13_REG_L5CTRL, + S2MPS13_REG_L6CTRL, + S2MPS13_REG_L7CTRL, + S2MPS13_REG_L8CTRL, + S2MPS13_REG_L9CTRL, + S2MPS13_REG_L10CTRL, + S2MPS13_REG_L11CTRL, + S2MPS13_REG_L12CTRL, + S2MPS13_REG_L13CTRL, + S2MPS13_REG_L14CTRL, + S2MPS13_REG_L15CTRL, + S2MPS13_REG_L16CTRL, + S2MPS13_REG_L17CTRL, + S2MPS13_REG_L18CTRL, + S2MPS13_REG_L19CTRL, + S2MPS13_REG_L20CTRL, + S2MPS13_REG_L21CTRL, + S2MPS13_REG_L22CTRL, + S2MPS13_REG_L23CTRL, + S2MPS13_REG_L24CTRL, + S2MPS13_REG_L25CTRL, + S2MPS13_REG_L26CTRL, + S2MPS13_REG_L27CTRL, + S2MPS13_REG_L28CTRL, + S2MPS13_REG_L30CTRL, + S2MPS13_REG_L31CTRL, + S2MPS13_REG_L32CTRL, + S2MPS13_REG_L33CTRL, + S2MPS13_REG_L34CTRL, + S2MPS13_REG_L35CTRL, + S2MPS13_REG_L36CTRL, + S2MPS13_REG_L37CTRL, + S2MPS13_REG_L38CTRL, + S2MPS13_REG_L39CTRL, + S2MPS13_REG_L40CTRL, + S2MPS13_REG_LDODSCH1, + S2MPS13_REG_LDODSCH2, + S2MPS13_REG_LDODSCH3, + S2MPS13_REG_LDODSCH4, + S2MPS13_REG_LDODSCH5, +}; + +/* regulator ids */ +enum s2mps13_regulators { + S2MPS13_LDO1, + S2MPS13_LDO2, + S2MPS13_LDO3, + S2MPS13_LDO4, + S2MPS13_LDO5, + S2MPS13_LDO6, + S2MPS13_LDO7, + S2MPS13_LDO8, + S2MPS13_LDO9, + S2MPS13_LDO10, + S2MPS13_LDO11, + S2MPS13_LDO12, + S2MPS13_LDO13, + S2MPS13_LDO14, + S2MPS13_LDO15, + S2MPS13_LDO16, + S2MPS13_LDO17, + S2MPS13_LDO18, + S2MPS13_LDO19, + S2MPS13_LDO20, + S2MPS13_LDO21, + S2MPS13_LDO22, + S2MPS13_LDO23, + S2MPS13_LDO24, + S2MPS13_LDO25, + S2MPS13_LDO26, + S2MPS13_LDO27, + S2MPS13_LDO28, + S2MPS13_LDO29, + S2MPS13_LDO30, + S2MPS13_LDO31, + S2MPS13_LDO32, + S2MPS13_LDO33, + S2MPS13_LDO34, + S2MPS13_LDO35, + S2MPS13_LDO36, + S2MPS13_LDO37, + S2MPS13_LDO38, + S2MPS13_LDO39, + S2MPS13_LDO40, + S2MPS13_BUCK1, + S2MPS13_BUCK2, + S2MPS13_BUCK3, + S2MPS13_BUCK4, + S2MPS13_BUCK5, + S2MPS13_BUCK6, + S2MPS13_BUCK7, + S2MPS13_BUCK8, + S2MPS13_BUCK9, + S2MPS13_BUCK10, + + S2MPS13_REGULATOR_MAX, +}; + +/* + * Default ramp delay in uv/us. Datasheet says that ramp delay can be + * controlled however it does not specify which register is used for that. + * Let's assume that default value will be set. + */ +#define S2MPS13_BUCK_RAMP_DELAY 12500 + +#endif /* __LINUX_MFD_S2MPS13_H */ -- cgit v1.2.3 From f928b53d749bac4514c2ed1ea4d553fa581578b5 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 18 Nov 2014 17:59:41 +0900 Subject: clk: s2mps11: Add the support for S2MPS13 PMIC clock This patch adds the support for S2MPS13 PMIC clock which is same with existing S2MPS14 RTC IP. But, S2MPS13 uses all of clocks (32khz_{ap|bt|cp}). Signed-off-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Acked-by: Michael Turquette Signed-off-by: Lee Jones --- drivers/clk/clk-s2mps11.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index b7797fb12e12..7bb13af8e214 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = { }, }; +static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = { + [S2MPS11_CLK_AP] = { + .name = "s2mps13_ap", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, + [S2MPS11_CLK_CP] = { + .name = "s2mps13_cp", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, + [S2MPS11_CLK_BT] = { + .name = "s2mps13_bt", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = { [S2MPS11_CLK_AP] = { .name = "s2mps14_ap", @@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev) s2mps11_reg = S2MPS11_REG_RTC_CTRL; clks_init = s2mps11_clks_init; break; + case S2MPS13X: + s2mps11_reg = S2MPS13_REG_RTCCTRL; + clks_init = s2mps13_clks_init; + break; case S2MPS14X: s2mps11_reg = S2MPS14_REG_RTCCTRL; clks_init = s2mps14_clks_init; @@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev) static const struct platform_device_id s2mps11_clk_id[] = { { "s2mps11-clk", S2MPS11X}, + { "s2mps13-clk", S2MPS13X}, { "s2mps14-clk", S2MPS14X}, { "s5m8767-clk", S5M8767X}, { }, -- cgit v1.2.3 From 11d0d30093301169833aedfc130d9e4abe621be1 Mon Sep 17 00:00:00 2001 From: Johannes Pointner Date: Thu, 25 Sep 2014 08:31:42 +0200 Subject: mfd: tps65217: Add compatible string for subdevices Adds of_compatible strings to mfd_cells for sub devices of the tps65217. Signed-off-by: Johannes Pointner Signed-off-by: Lee Jones --- drivers/mfd/tps65217.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index a8ee52c95f2f..80a919a8ca97 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -33,9 +33,11 @@ static const struct mfd_cell tps65217s[] = { { .name = "tps65217-pmic", + .of_compatible = "ti,tps65217-pmic", }, { .name = "tps65217-bl", + .of_compatible = "ti,tps65217-bl", }, }; -- cgit v1.2.3 From efbf49224acc8ba5ac4d7ac93b5035836aebf400 Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Thu, 18 Sep 2014 01:40:24 +0900 Subject: mfd: max77693: Initialize haptic register map This patch add regmap_haptic initialization to use haptic register map in haptic device driver. Signed-off-by: Jaewon Kim Acked-by: Chanwoo Choi Signed-off-by: Lee Jones --- drivers/mfd/max77693.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index cf008f45968c..09bf664ac2e0 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -147,6 +147,12 @@ static const struct regmap_irq_chip max77693_muic_irq_chip = { .num_irqs = ARRAY_SIZE(max77693_muic_irqs), }; +static const struct regmap_config max77693_regmap_haptic_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77693_HAPTIC_REG_END, +}; + static int max77693_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -196,6 +202,15 @@ static int max77693_i2c_probe(struct i2c_client *i2c, } i2c_set_clientdata(max77693->haptic, max77693); + max77693->regmap_haptic = devm_regmap_init_i2c(max77693->haptic, + &max77693_regmap_haptic_config); + if (IS_ERR(max77693->regmap_haptic)) { + ret = PTR_ERR(max77693->regmap_haptic); + dev_err(max77693->dev, + "failed to initialize haptic register map: %d\n", ret); + goto err_regmap; + } + /* * Initialize register map for MUIC device because use regmap-muic * instance of MUIC device when irq of max77693 is initialized @@ -207,7 +222,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(max77693->regmap_muic); dev_err(max77693->dev, "failed to allocate register map: %d\n", ret); - goto err_regmap_muic; + goto err_regmap; } ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, @@ -217,7 +232,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, &max77693->irq_data_led); if (ret) { dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); - goto err_regmap_muic; + goto err_regmap; } ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, @@ -268,7 +283,7 @@ err_irq_charger: regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys); err_irq_topsys: regmap_del_irq_chip(max77693->irq, max77693->irq_data_led); -err_regmap_muic: +err_regmap: i2c_unregister_device(max77693->haptic); err_i2c_haptic: i2c_unregister_device(max77693->muic); -- cgit v1.2.3 From d1bafd78fce5f07bfc9c2c8a77146f74528a469e Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Thu, 18 Sep 2014 01:40:25 +0900 Subject: mfd: max77693: Add haptic of_compatible in mfd_cell This patch add haptic of_compatible in order to use the haptic device driver using Devicetree. Signed-off-by: Jaewon Kim Acked-by: Chanwoo Choi Signed-off-by: Lee Jones --- drivers/mfd/max77693.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 09bf664ac2e0..b57ae93b1cba 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -45,7 +45,10 @@ static const struct mfd_cell max77693_devs[] = { { .name = "max77693-pmic", }, { .name = "max77693-charger", }, { .name = "max77693-muic", }, - { .name = "max77693-haptic", }, + { + .name = "max77693-haptic", + .of_compatible = "maxim,max77693-haptic", + }, { .name = "max77693-flash", .of_compatible = "maxim,max77693-flash", -- cgit v1.2.3 From bdb0066df96e74a4002125467ebe459feff1ebef Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Tue, 30 Sep 2014 14:05:27 +0530 Subject: mfd: syscon: Decouple syscon interface from platform devices Currently a syscon entity can be only registered directly through a platform device that binds to a dedicated syscon driver. However in certain use cases it is desirable to make a device used with another driver a syscon interface provider. For example, certain SoCs (e.g. Exynos) contain system controller blocks which perform various functions such as power domain control, CPU power management, low power mode control, but in addition contain certain IP integration glue, such as various signal masks, coprocessor power control, etc. In such case, there is a need to have a dedicated driver for such system controller but also share registers with other drivers. The latter is where the syscon interface is helpful. In case of DT based platforms, this patch decouples syscon object from syscon platform driver, and allows to create syscon objects first time when it is required by calling of syscon_regmap_lookup_by APIs and keep a list of such syscon objects along with syscon provider device_nodes and regmap handles. For non-DT based platforms, this patch keeps syscon platform driver structure so that syscon can be probed and such non-DT based drivers can use syscon_regmap_lookup_by_pdev API and access regmap handles. Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based, we can completely remove platform driver of syscon, and keep only helper functions to get regmap handles. Suggested-by: Arnd Bergmann Suggested-by: Tomasz Figa Tested-by: Vivek Gautam Tested-by: Javier Martinez Canillas Signed-off-by: Pankaj Dubey Reviewed-by: Arnd Bergmann Tested-by: Heiko Stuebner Reviewed-by: Heiko Stuebner Signed-off-by: Lee Jones --- drivers/mfd/syscon.c | 96 ++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 74 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index ca15878ce5c0..72373b113885 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -22,31 +23,94 @@ #include #include #include +#include static struct platform_driver syscon_driver; +static DEFINE_SPINLOCK(syscon_list_slock); +static LIST_HEAD(syscon_list); + struct syscon { + struct device_node *np; struct regmap *regmap; + struct list_head list; +}; + +static struct regmap_config syscon_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, }; -static int syscon_match_node(struct device *dev, void *data) +static struct syscon *of_syscon_register(struct device_node *np) { - struct device_node *dn = data; + struct syscon *syscon; + struct regmap *regmap; + void __iomem *base; + int ret; + struct regmap_config syscon_config = syscon_regmap_config; + + if (!of_device_is_compatible(np, "syscon")) + return ERR_PTR(-EINVAL); + + syscon = kzalloc(sizeof(*syscon), GFP_KERNEL); + if (!syscon) + return ERR_PTR(-ENOMEM); + + base = of_iomap(np, 0); + if (!base) { + ret = -ENOMEM; + goto err_map; + } + + /* Parse the device's DT node for an endianness specification */ + if (of_property_read_bool(np, "big-endian")) + syscon_config.val_format_endian = REGMAP_ENDIAN_BIG; + else if (of_property_read_bool(np, "little-endian")) + syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE; + + regmap = regmap_init_mmio(NULL, base, &syscon_config); + if (IS_ERR(regmap)) { + pr_err("regmap init failed\n"); + ret = PTR_ERR(regmap); + goto err_regmap; + } + + syscon->regmap = regmap; + syscon->np = np; + + spin_lock(&syscon_list_slock); + list_add_tail(&syscon->list, &syscon_list); + spin_unlock(&syscon_list_slock); - return (dev->of_node == dn) ? 1 : 0; + return syscon; + +err_regmap: + iounmap(base); +err_map: + kfree(syscon); + return ERR_PTR(ret); } struct regmap *syscon_node_to_regmap(struct device_node *np) { - struct syscon *syscon; - struct device *dev; + struct syscon *entry, *syscon = NULL; - dev = driver_find_device(&syscon_driver.driver, NULL, np, - syscon_match_node); - if (!dev) - return ERR_PTR(-EPROBE_DEFER); + spin_lock(&syscon_list_slock); - syscon = dev_get_drvdata(dev); + list_for_each_entry(entry, &syscon_list, list) + if (entry->np == np) { + syscon = entry; + break; + } + + spin_unlock(&syscon_list_slock); + + if (!syscon) + syscon = of_syscon_register(np); + + if (IS_ERR(syscon)) + return ERR_CAST(syscon); return syscon->regmap; } @@ -110,17 +174,6 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np, } EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle); -static const struct of_device_id of_syscon_match[] = { - { .compatible = "syscon", }, - { }, -}; - -static struct regmap_config syscon_regmap_config = { - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - static int syscon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -167,7 +220,6 @@ static struct platform_driver syscon_driver = { .driver = { .name = "syscon", .owner = THIS_MODULE, - .of_match_table = of_syscon_match, }, .probe = syscon_probe, .id_table = syscon_ids, -- cgit v1.2.3 From 1ab589c72ef66f5f281d658ab606e02d661031d8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 26 Sep 2014 12:55:31 +0200 Subject: mfd: Use mfd_add_hotplug_devices() helper Use mfd_add_hotplug_devices helper to register the subdevices. Signed-off-by: Johan Hovold Signed-off-by: Lee Jones --- drivers/mfd/rtsx_usb.c | 4 ++-- drivers/mfd/viperboard.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c index 9cf98d142d9a..dbdd0faeb6ce 100644 --- a/drivers/mfd/rtsx_usb.c +++ b/drivers/mfd/rtsx_usb.c @@ -647,8 +647,8 @@ static int rtsx_usb_probe(struct usb_interface *intf, /* initialize USB SG transfer timer */ setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr); - ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells, - ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL); + ret = mfd_add_hotplug_devices(&intf->dev, rtsx_usb_cells, + ARRAY_SIZE(rtsx_usb_cells)); if (ret) goto out_init_fail; diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c index e00f5340ed87..e6b3c70aeb22 100644 --- a/drivers/mfd/viperboard.c +++ b/drivers/mfd/viperboard.c @@ -93,8 +93,8 @@ static int vprbrd_probe(struct usb_interface *interface, version >> 8, version & 0xff, vb->usb_dev->bus->busnum, vb->usb_dev->devnum); - ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs, - ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL); + ret = mfd_add_hotplug_devices(&interface->dev, vprbrd_devs, + ARRAY_SIZE(vprbrd_devs)); if (ret != 0) { dev_err(&interface->dev, "Failed to add mfd devices to core."); goto error; -- cgit v1.2.3 From 16b5fe2966b8dc4a474d6618d382d26933d90b24 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 26 Sep 2014 12:55:32 +0200 Subject: HID: hid-sensor-hub: Use mfd_add_hotplug_devices() helper Use mfd_add_hotplug_devices() helper to register the subdevices. Compile-only tested. Signed-off-by: Johan Hovold Acked-by: Jiri Kosina Signed-off-by: Lee Jones --- drivers/hid/hid-sensor-hub.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index e6d8e18dae97..6a58b6c723aa 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -640,9 +640,6 @@ static int sensor_hub_probe(struct hid_device *hdev, ret = -ENOMEM; goto err_stop_hw; } - sd->hid_sensor_hub_client_devs[ - sd->hid_sensor_client_cnt].id = - PLATFORM_DEVID_AUTO; sd->hid_sensor_hub_client_devs[ sd->hid_sensor_client_cnt].name = name; sd->hid_sensor_hub_client_devs[ @@ -659,8 +656,9 @@ static int sensor_hub_probe(struct hid_device *hdev, if (last_hsdev) last_hsdev->end_collection_index = i; - ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs, - sd->hid_sensor_client_cnt, NULL, 0, NULL); + ret = mfd_add_hotplug_devices(&hdev->dev, + sd->hid_sensor_hub_client_devs, + sd->hid_sensor_client_cnt); if (ret < 0) goto err_stop_hw; -- cgit v1.2.3 From 6e3f62f0793ebff3f91076490ff0fbb107939701 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 26 Sep 2014 12:55:33 +0200 Subject: mfd: core: Fix platform-device id generation Make sure to always honour multi-function devices registered with PLATFORM_DEVID_NONE (-1) or PLATFORM_DEVID_AUTO (-2) as id base. In this case it does not make sense to append the cell id to the mfd-id base and potentially change the requested behaviour. Specifically this will allow multi-function devices to be registered with PLATFORM_DEVID_AUTO while still having non-zero cell ids. Signed-off-by: Johan Hovold Signed-off-by: Lee Jones --- drivers/mfd/mfd-core.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index f3338fe9d069..2a87f69be53d 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -125,9 +125,15 @@ static int mfd_add_device(struct device *parent, int id, struct platform_device *pdev; struct device_node *np = NULL; int ret = -ENOMEM; + int platform_id; int r; - pdev = platform_device_alloc(cell->name, id + cell->id); + if (id < 0) + platform_id = id; + else + platform_id = id + cell->id; + + pdev = platform_device_alloc(cell->name, platform_id); if (!pdev) goto fail_alloc; -- cgit v1.2.3 From 2c86e9fb7263dbca2c21a086090d32ba90129f7b Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 6 Oct 2014 15:48:43 +0200 Subject: mfd: Add atmel-hlcdc driver The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) exposes 2 subdevices: - a display controller (controlled by a DRM driver) - a PWM chip The MFD device provides a regmap and several clocks (those connected to this hardware block) to its subdevices. This way concurrent accesses to the iomem range are handled by the regmap framework, and each subdevice can safely access HLCDC registers. Signed-off-by: Boris Brezillon Tested-by: Anthony Harivel Tested-by: Ludovic Desroches Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 6 ++ drivers/mfd/Makefile | 1 + drivers/mfd/atmel-hlcdc.c | 122 ++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/atmel-hlcdc.h | 85 ++++++++++++++++++++++++++++ 4 files changed, 214 insertions(+) create mode 100644 drivers/mfd/atmel-hlcdc.c create mode 100644 include/linux/mfd/atmel-hlcdc.h (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index fdbb40181834..bd4a155a9564 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -59,6 +59,12 @@ config MFD_AAT2870_CORE additional drivers must be enabled in order to use the functionality of the device. +config MFD_ATMEL_HLCDC + tristate + select MFD_CORE + select REGMAP_MMIO + depends on OF + config MFD_BCM590XX tristate "Broadcom BCM590xx PMUs" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 10bbd0b9096b..2cd7e743280c 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -157,6 +157,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_TPS65090) += tps65090.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o +obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o obj-$(CONFIG_MFD_PALMAS) += palmas.o obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c new file mode 100644 index 000000000000..cfd58f4cc5c3 --- /dev/null +++ b/drivers/mfd/atmel-hlcdc.c @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Boris BREZILLON + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include + +#define ATMEL_HLCDC_REG_MAX (0x4000 - 0x4) + +static const struct mfd_cell atmel_hlcdc_cells[] = { + { + .name = "atmel-hlcdc-pwm", + .of_compatible = "atmel,hlcdc-pwm", + }, + { + .name = "atmel-hlcdc-dc", + .of_compatible = "atmel,hlcdc-display-controller", + }, +}; + +static const struct regmap_config atmel_hlcdc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = ATMEL_HLCDC_REG_MAX, +}; + +static int atmel_hlcdc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct atmel_hlcdc *hlcdc; + struct resource *res; + void __iomem *regs; + + hlcdc = devm_kzalloc(dev, sizeof(*hlcdc), GFP_KERNEL); + if (!hlcdc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + hlcdc->irq = platform_get_irq(pdev, 0); + if (hlcdc->irq < 0) + return hlcdc->irq; + + hlcdc->periph_clk = devm_clk_get(dev, "periph_clk"); + if (IS_ERR(hlcdc->periph_clk)) { + dev_err(dev, "failed to get peripheral clock\n"); + return PTR_ERR(hlcdc->periph_clk); + } + + hlcdc->sys_clk = devm_clk_get(dev, "sys_clk"); + if (IS_ERR(hlcdc->sys_clk)) { + dev_err(dev, "failed to get system clock\n"); + return PTR_ERR(hlcdc->sys_clk); + } + + hlcdc->slow_clk = devm_clk_get(dev, "slow_clk"); + if (IS_ERR(hlcdc->slow_clk)) { + dev_err(dev, "failed to get slow clock\n"); + return PTR_ERR(hlcdc->slow_clk); + } + + hlcdc->regmap = devm_regmap_init_mmio(dev, regs, + &atmel_hlcdc_regmap_config); + if (IS_ERR(hlcdc->regmap)) + return PTR_ERR(hlcdc->regmap); + + dev_set_drvdata(dev, hlcdc); + + return mfd_add_devices(dev, -1, atmel_hlcdc_cells, + ARRAY_SIZE(atmel_hlcdc_cells), + NULL, 0, NULL); +} + +static int atmel_hlcdc_remove(struct platform_device *pdev) +{ + mfd_remove_devices(&pdev->dev); + + return 0; +} + +static const struct of_device_id atmel_hlcdc_match[] = { + { .compatible = "atmel,sama5d3-hlcdc" }, + { /* sentinel */ }, +}; + +static struct platform_driver atmel_hlcdc_driver = { + .probe = atmel_hlcdc_probe, + .remove = atmel_hlcdc_remove, + .driver = { + .name = "atmel-hlcdc", + .of_match_table = atmel_hlcdc_match, + }, +}; +module_platform_driver(atmel_hlcdc_driver); + +MODULE_ALIAS("platform:atmel-hlcdc"); +MODULE_AUTHOR("Boris Brezillon "); +MODULE_DESCRIPTION("Atmel HLCDC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/atmel-hlcdc.h b/include/linux/mfd/atmel-hlcdc.h new file mode 100644 index 000000000000..1279ab1644b5 --- /dev/null +++ b/include/linux/mfd/atmel-hlcdc.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Boris BREZILLON + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __LINUX_MFD_HLCDC_H +#define __LINUX_MFD_HLCDC_H + +#include +#include + +#define ATMEL_HLCDC_CFG(i) ((i) * 0x4) +#define ATMEL_HLCDC_SIG_CFG LCDCFG(5) +#define ATMEL_HLCDC_HSPOL BIT(0) +#define ATMEL_HLCDC_VSPOL BIT(1) +#define ATMEL_HLCDC_VSPDLYS BIT(2) +#define ATMEL_HLCDC_VSPDLYE BIT(3) +#define ATMEL_HLCDC_DISPPOL BIT(4) +#define ATMEL_HLCDC_DITHER BIT(6) +#define ATMEL_HLCDC_DISPDLY BIT(7) +#define ATMEL_HLCDC_MODE_MASK GENMASK(9, 8) +#define ATMEL_HLCDC_PP BIT(10) +#define ATMEL_HLCDC_VSPSU BIT(12) +#define ATMEL_HLCDC_VSPHO BIT(13) +#define ATMEL_HLCDC_GUARDTIME_MASK GENMASK(20, 16) + +#define ATMEL_HLCDC_EN 0x20 +#define ATMEL_HLCDC_DIS 0x24 +#define ATMEL_HLCDC_SR 0x28 +#define ATMEL_HLCDC_IER 0x2c +#define ATMEL_HLCDC_IDR 0x30 +#define ATMEL_HLCDC_IMR 0x34 +#define ATMEL_HLCDC_ISR 0x38 + +#define ATMEL_HLCDC_CLKPOL BIT(0) +#define ATMEL_HLCDC_CLKSEL BIT(2) +#define ATMEL_HLCDC_CLKPWMSEL BIT(3) +#define ATMEL_HLCDC_CGDIS(i) BIT(8 + (i)) +#define ATMEL_HLCDC_CLKDIV_SHFT 16 +#define ATMEL_HLCDC_CLKDIV_MASK GENMASK(23, 16) +#define ATMEL_HLCDC_CLKDIV(div) ((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT) + +#define ATMEL_HLCDC_PIXEL_CLK BIT(0) +#define ATMEL_HLCDC_SYNC BIT(1) +#define ATMEL_HLCDC_DISP BIT(2) +#define ATMEL_HLCDC_PWM BIT(3) +#define ATMEL_HLCDC_SIP BIT(4) + +#define ATMEL_HLCDC_SOF BIT(0) +#define ATMEL_HLCDC_SYNCDIS BIT(1) +#define ATMEL_HLCDC_FIFOERR BIT(4) +#define ATMEL_HLCDC_LAYER_STATUS(x) BIT((x) + 8) + +/** + * Structure shared by the MFD device and its subdevices. + * + * @regmap: register map used to access HLCDC IP registers + * @periph_clk: the hlcdc peripheral clock + * @sys_clk: the hlcdc system clock + * @slow_clk: the system slow clk + * @irq: the hlcdc irq + */ +struct atmel_hlcdc { + struct regmap *regmap; + struct clk *periph_clk; + struct clk *sys_clk; + struct clk *slow_clk; + int irq; +}; + +#endif /* __LINUX_MFD_HLCDC_H */ -- cgit v1.2.3 From 6f467e5f0cdc3c0304bfcabcbaf56970ddea3d52 Mon Sep 17 00:00:00 2001 From: Will Sheppard Date: Wed, 15 Oct 2014 09:38:47 +0100 Subject: mfd: arizona-spi: Add lines after declarations - checkpatch catch This was found whilst running checkpatch.pl on arizona-spi. WARNING: Missing a blank line after declarations + struct arizona *arizona = spi_get_drvdata(spi); + arizona_dev_exit(arizona); Signed-off-by: Will Sheppard Signed-off-by: Lee Jones --- drivers/mfd/arizona-spi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c index 5145d78bf07e..8ef58bcff193 100644 --- a/drivers/mfd/arizona-spi.c +++ b/drivers/mfd/arizona-spi.c @@ -75,7 +75,9 @@ static int arizona_spi_probe(struct spi_device *spi) static int arizona_spi_remove(struct spi_device *spi) { struct arizona *arizona = spi_get_drvdata(spi); + arizona_dev_exit(arizona); + return 0; } -- cgit v1.2.3 From efa3ca414be9b930774b5c1a3190f735596f5115 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 20 Oct 2014 14:34:46 +0200 Subject: mfd: max77693: Map charger device to its own of_node Add a "maxim,max77693-charger" of_compatible to the mfd_cell so the MFD child device (the charger) will have its own of_node set. This will be used by the max77693 charger driver in next patches to obtain battery configuration from DTS. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- drivers/mfd/max77693.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index b57ae93b1cba..9d75a364397d 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -43,7 +43,10 @@ static const struct mfd_cell max77693_devs[] = { { .name = "max77693-pmic", }, - { .name = "max77693-charger", }, + { + .name = "max77693-charger", + .of_compatible = "maxim,max77693-charger", + }, { .name = "max77693-muic", }, { .name = "max77693-haptic", -- cgit v1.2.3 From 6ce286f182e22837a02a368eeb49a0057b2cd5f9 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 20 Oct 2014 23:05:50 +0200 Subject: Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption" This reverts commit b7cde7078d2344073c310aa65fc2b0a845d2cb5b ("mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption") Commit b7cde7078d23 called regulator_suspend_prepare() to prepare the regulators for a suspend state. But it did from the device pm suspend handler while the regulator suspend prepare function iterates over all regulators and not only the one managed by this device so it doesn't seems to be correct to call it from within a device driver. It is better to call the regulator suspend prepare/finish functions from platform code instead so this patch reverts the mentioned commit. Suggested-by: Doug Anderson Signed-off-by: Javier Martinez Canillas Reviewed-by: Chanwoo Choi Reviewed-by: Doug Anderson Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 1 - drivers/mfd/sec-core.c | 10 ---------- 2 files changed, 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index bd4a155a9564..72d38081f779 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -672,7 +672,6 @@ config MFD_SEC_CORE select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - select REGULATOR help Support for the Samsung Electronics MFD series. This driver provides common support for accessing the device, diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index b39960532f76..0a7bc43db4e4 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -32,7 +32,6 @@ #include #include #include -#include #include static const struct mfd_cell s5m8751_devs[] = { @@ -461,15 +460,6 @@ static int sec_pmic_suspend(struct device *dev) */ disable_irq(sec_pmic->irq); - switch (sec_pmic->device_type) { - case S2MPS14X: - case S2MPU02: - regulator_suspend_prepare(PM_SUSPEND_MEM); - break; - default: - break; - } - return 0; } -- cgit v1.2.3 From 5cb5d9616a47d5383a85379afa4429382ef46b38 Mon Sep 17 00:00:00 2001 From: Micky Ching Date: Fri, 10 Oct 2014 13:58:44 +0800 Subject: mfd: rtsx: Fix PM suspend for 5227 & 5249 Fix rts5227&5249 failed send buffer cmd after suspend, PM_CTRL3 should reset before send any buffer cmd after suspend. Otherwise, buffer cmd will failed, this will lead resume fail. Signed-off-by: Micky Ching Signed-off-by: Lee Jones --- drivers/mfd/Makefile | 2 +- drivers/mfd/rts5227.c | 6 ++++++ drivers/mfd/rts5249.c | 4 ++++ drivers/mfd/rtsx_gops.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/mfd/rtsx_pcr.h | 3 +++ include/linux/mfd/rtsx_pci.h | 28 ++++++++++++++++++++++++++++ 6 files changed, 79 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/rtsx_gops.c (limited to 'drivers') diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2cd7e743280c..53467e211381 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o -rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o +rtsx_pci-objs := rtsx_pcr.o rtsx_gops.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c index 9c8eec80ceed..32407404d838 100644 --- a/drivers/mfd/rts5227.c +++ b/drivers/mfd/rts5227.c @@ -130,6 +130,12 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr) static int rts5227_optimize_phy(struct rtsx_pcr *pcr) { + int err; + + err = rtsx_gops_pm_reset(pcr); + if (err < 0) + return err; + /* Optimize RX sensitivity */ return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42); } diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c index 573de7bfcced..cf425cc959d5 100644 --- a/drivers/mfd/rts5249.c +++ b/drivers/mfd/rts5249.c @@ -130,6 +130,10 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr) { int err; + err = rtsx_gops_pm_reset(pcr); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED | PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN | diff --git a/drivers/mfd/rtsx_gops.c b/drivers/mfd/rtsx_gops.c new file mode 100644 index 000000000000..b1a98c678593 --- /dev/null +++ b/drivers/mfd/rtsx_gops.c @@ -0,0 +1,37 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + * + * Author: + * Micky Ching + */ + +#include +#include "rtsx_pcr.h" + +int rtsx_gops_pm_reset(struct rtsx_pcr *pcr) +{ + int err; + + /* init aspm */ + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0x00); + err = rtsx_pci_update_cfg_byte(pcr, LCTLR, ~LCTLR_ASPM_CTL_MASK, 0x00); + if (err < 0) + return err; + + /* reset PM_CTRL3 before send buffer cmd */ + return rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00); +} diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h index 07e4c2ebf05a..fe2bbb67defc 100644 --- a/drivers/mfd/rtsx_pcr.h +++ b/drivers/mfd/rtsx_pcr.h @@ -72,4 +72,7 @@ do { \ pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \ } while (0) +/* generic operations */ +int rtsx_gops_pm_reset(struct rtsx_pcr *pcr); + #endif diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index 74346d5e7899..1604dda4edcf 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -707,6 +707,14 @@ #define PM_CTRL1 0xFF44 #define PM_CTRL2 0xFF45 #define PM_CTRL3 0xFF46 +#define SDIO_SEND_PME_EN 0x80 +#define FORCE_RC_MODE_ON 0x40 +#define FORCE_RX50_LINK_ON 0x20 +#define D3_DELINK_MODE_EN 0x10 +#define USE_PESRTB_CTL_DELINK 0x08 +#define DELAY_PIN_WAKE 0x04 +#define RESET_PIN_WAKE 0x02 +#define PM_WAKE_EN 0x01 #define PM_CTRL4 0xFF47 /* Memory mapping */ @@ -752,6 +760,14 @@ #define PHY_DUM_REG 0x1F #define LCTLR 0x80 +#define LCTLR_EXT_SYNC 0x80 +#define LCTLR_COMMON_CLOCK_CFG 0x40 +#define LCTLR_RETRAIN_LINK 0x20 +#define LCTLR_LINK_DISABLE 0x10 +#define LCTLR_RCB 0x08 +#define LCTLR_RESERVED 0x04 +#define LCTLR_ASPM_CTL_MASK 0x03 + #define PCR_SETTING_REG1 0x724 #define PCR_SETTING_REG2 0x814 #define PCR_SETTING_REG3 0x747 @@ -967,4 +983,16 @@ static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) return (u8 *)(pcr->host_cmds_ptr); } +static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr, + u8 mask, u8 append) +{ + int err; + u8 val; + + err = pci_read_config_byte(pcr->pci, addr, &val); + if (err < 0) + return err; + return pci_write_config_byte(pcr->pci, addr, (val & mask) | append); +} + #endif -- cgit v1.2.3 From 1b9b46d05f887aec418b3a5f4f55abf79316fcda Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sun, 2 Nov 2014 10:09:38 -0800 Subject: mfd: twl4030-power: Fix regression with missing compatible flag Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") accidentally removed the compatible flag for "ti,twl4030-power" that should be there as documented in the binding. If "ti,twl4030-power" only the poweroff configuration is done by the driver. Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") Cc: stable@vger.kernel.org # v3.16+ Reported-by: "Dr. H. Nikolaus Schaller" Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- drivers/mfd/twl4030-power.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index cf92a6d1c532..87f3ea8fd29a 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -778,6 +778,9 @@ static struct twl4030_power_data osc_off_idle = { }; static struct of_device_id twl4030_power_of_match[] = { + { + .compatible = "ti,twl4030-power", + }, { .compatible = "ti,twl4030-power-reset", .data = &omap3_reset, -- cgit v1.2.3 From 51a7e02bb629498c32915881ed4fb61ef778282a Mon Sep 17 00:00:00 2001 From: Pramod Gurav Date: Thu, 30 Oct 2014 14:51:35 +0530 Subject: mfd: db8500-prcmu: Check return of devm_ioremap for error Error check around return value of devm_ioremap is missing. Add the same to avoid NULL pointer dereference. Signed-off-by: Pramod Gurav Acked-by: Linus Walleij Signed-off-by: Lee Jones --- drivers/mfd/db8500-prcmu.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 193cf168ba84..89ae8bf665b4 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3167,6 +3167,11 @@ static int db8500_prcmu_probe(struct platform_device *pdev) } tcdm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!tcdm_base) { + dev_err(&pdev->dev, + "failed to ioremap prcmu-tcdm register memory\n"); + return -ENOENT; + } /* Clean up the mailbox interrupts after pre-kernel code. */ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); -- cgit v1.2.3 From 6bdf891a17148a1b91beb603b09c599dc98eb4fb Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 3 Nov 2014 16:12:26 +0000 Subject: mfd: db8500-prcmu: Provide sane error path values Also rid superfluous gotos and label. Cc: Linus Walleij Signed-off-by: Lee Jones --- drivers/mfd/db8500-prcmu.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 89ae8bf665b4..a8204730f01c 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3150,27 +3150,27 @@ static int db8500_prcmu_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu"); if (!res) { dev_err(&pdev->dev, "no prcmu memory region provided\n"); - return -ENOENT; + return -EINVAL; } prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!prcmu_base) { dev_err(&pdev->dev, "failed to ioremap prcmu register memory\n"); - return -ENOENT; + return -ENOMEM; } init_prcm_registers(); dbx500_fw_version_init(pdev, pdata->version_offset); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm"); if (!res) { dev_err(&pdev->dev, "no prcmu tcdm region provided\n"); - return -ENOENT; + return -EINVAL; } tcdm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!tcdm_base) { dev_err(&pdev->dev, "failed to ioremap prcmu-tcdm register memory\n"); - return -ENOENT; + return -ENOMEM; } /* Clean up the mailbox interrupts after pre-kernel code. */ @@ -3179,15 +3179,14 @@ static int db8500_prcmu_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "no prcmu irq provided\n"); - return -ENOENT; + return irq; } err = request_threaded_irq(irq, prcmu_irq_handler, prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); if (err < 0) { pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n"); - err = -EBUSY; - goto no_irq_return; + return err; } db8500_irq_init(np); @@ -3211,7 +3210,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add subdevices\n"); - goto no_irq_return; + return err; } } @@ -3219,12 +3218,10 @@ static int db8500_prcmu_probe(struct platform_device *pdev) if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add ab8500 subdevice\n"); - goto no_irq_return; + return err; } pr_info("DB8500 PRCMU initialized\n"); - -no_irq_return: return err; } static const struct of_device_id db8500_prcmu_match[] = { -- cgit v1.2.3 From 7d082baa349e59ce3de6452abc05e5de6436aad4 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 9 Oct 2014 09:18:38 -0700 Subject: mfd: ab8500-sysctrl: Drop ab8500_restart ab8500_restart is not called from anywhere in the kernel, so drop it. Signed-off-by: Guenter Roeck Acked-by: Linus Walleij Signed-off-by: Lee Jones --- drivers/mfd/ab8500-sysctrl.c | 57 ------------------------------- include/linux/mfd/abx500/ab8500-sysctrl.h | 1 - 2 files changed, 58 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 8e0dae59844d..94dbcdd2a1ff 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -85,63 +85,6 @@ shutdown: } } -/* - * Use the AB WD to reset the platform. It will perform a hard - * reset instead of a soft reset. Write the reset reason to - * the AB before reset, which can be read upon restart. - */ -void ab8500_restart(char mode, const char *cmd) -{ - struct ab8500_platform_data *plat; - struct ab8500_sysctrl_platform_data *pdata; - u16 reason = 0; - u8 val; - - if (sysctrl_dev == NULL) { - pr_err("%s: sysctrl not initialized\n", __func__); - return; - } - - plat = dev_get_platdata(sysctrl_dev->parent); - pdata = plat->sysctrl; - if (pdata && pdata->reboot_reason_code) - reason = pdata->reboot_reason_code(cmd); - else - pr_warn("[%s] No reboot reason set. Default reason %d\n", - __func__, reason); - - /* - * Disable RTC alarm, just a precaution so that no alarm - * is running when WD reset is executed. - */ - abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC, - RTC_CTRL , &val); - abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, - RTC_CTRL , (val & ~RTC_ALARM_ENABLE)); - - /* - * Android is not using the RTC alarm registers during reboot - * so we borrow them for writing the reason of reset - */ - - /* reason[8 LSB] */ - val = reason & 0xFF; - abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, - AB8500_ALARM_MIN_LOW , val); - - /* reason[8 MSB] */ - val = (reason>>8) & 0xFF; - abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, - AB8500_ALARM_MIN_MID , val); - - /* Setting WD timeout to 0 */ - ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0); - - /* Setting the parameters to AB8500 WD*/ - ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD | - AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD)); -} - static inline bool valid_bank(u8 bank) { return ((bank == AB8500_SYS_CTRL1_BLOCK) || diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index adba89d9c660..689312745b2f 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -12,7 +12,6 @@ int ab8500_sysctrl_read(u16 reg, u8 *value); int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); -void ab8500_restart(char mode, const char *cmd); #else -- cgit v1.2.3 From 1753b40f5c97e0d0bf2f0a562603cfc592945a5e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 26 Oct 2014 22:25:02 -0700 Subject: mfd: wm8350-core: Fix probable mask then right shift defect Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches Acked-by: Charles Keepax Signed-off-by: Lee Jones --- drivers/mfd/wm8350-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 4ab527f5c53b..f5124a8acad8 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -308,7 +308,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, goto err; } - mode = id2 & WM8350_CONF_STS_MASK >> 10; + mode = (id2 & WM8350_CONF_STS_MASK) >> 10; cust_id = id2 & WM8350_CUST_ID_MASK; chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12; dev_info(wm8350->dev, -- cgit v1.2.3 From bde3e706a63d5c258b3e4f5e327bcf032fb1adfe Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 3 Nov 2014 19:29:23 +0200 Subject: mfd: lpc_sch: Don't call mfd_remove_devices() MFD core already cares about failing registration. It will remove successfully registered devices in case of error. Thus, no need to repeatedly call mfd_remove_devices(). Fixes: 5829e9b64e65 (mfd: lpc_sch: Accomodate partial population of the MFD devices) Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones --- drivers/mfd/lpc_sch.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index c980da479a35..5c38df35a84d 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -193,11 +193,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } - ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL); - if (ret) - mfd_remove_devices(&dev->dev); - - return ret; + return mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL); } static void lpc_sch_remove(struct pci_dev *dev) -- cgit v1.2.3 From 1a5fb99de4850cba710d91becfa2c65653048589 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 24 Oct 2014 21:19:57 +0400 Subject: mfd: tc6393xb: Fail ohci suspend if full state restore is required Some boards with TC6393XB chip require full state restore during system resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000 tosa is one of them). Failing to do so would result in ohci Oops on resume due to internal memory contentes being changed. Fail ohci suspend on tc6393xb is full state restore is required. Recommended workaround is to unbind tmio-ohci driver before suspend and rebind it after resume. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Lee Jones --- drivers/mfd/tc6393xb.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 4fac16bcd732..0afddf6c37af 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -263,6 +263,17 @@ static int tc6393xb_ohci_disable(struct platform_device *dev) return 0; } +static int tc6393xb_ohci_suspend(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev_get_platdata(dev->dev.parent); + + /* We can't properly store/restore OHCI state, so fail here */ + if (tcpd->resume_restore) + return -EBUSY; + + return tc6393xb_ohci_disable(dev); +} + static int tc6393xb_fb_enable(struct platform_device *dev) { struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent); @@ -403,7 +414,7 @@ static struct mfd_cell tc6393xb_cells[] = { .num_resources = ARRAY_SIZE(tc6393xb_ohci_resources), .resources = tc6393xb_ohci_resources, .enable = tc6393xb_ohci_enable, - .suspend = tc6393xb_ohci_disable, + .suspend = tc6393xb_ohci_suspend, .resume = tc6393xb_ohci_enable, .disable = tc6393xb_ohci_disable, }, -- cgit v1.2.3 From 12849b63a4e9e22fb63d0fc967726e8cdf2a19c2 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 10 Nov 2014 12:28:36 +0000 Subject: mfd: tps65090: Fix bonkers indenting strategy First spotted pointless (incorrect) indent of 'if (ret)', then double indentations of a struct attribute 'mask'. Decided to go through the whole file and make amendments instead and this is the result. Signed-off-by: Lee Jones --- drivers/mfd/tps65090.c | 62 +++++++++++++++++++++++++------------------------- 1 file changed, 31 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index 1c3e6e2efe41..14b62e11aff4 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -76,58 +76,58 @@ static struct mfd_cell tps65090s[] = { static const struct regmap_irq tps65090_irqs[] = { /* INT1 IRQs*/ [TPS65090_IRQ_VAC_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE, }, [TPS65090_IRQ_VSYS_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE, }, [TPS65090_IRQ_BAT_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE, }, [TPS65090_IRQ_CHARGING_STATUS_CHANGE] = { - .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE, + .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE, }, [TPS65090_IRQ_CHARGING_COMPLETE] = { - .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE, + .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE, }, [TPS65090_IRQ_OVERLOAD_DCDC1] = { - .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1, + .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1, }, [TPS65090_IRQ_OVERLOAD_DCDC2] = { - .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2, + .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2, }, /* INT2 IRQs*/ [TPS65090_IRQ_OVERLOAD_DCDC3] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3, }, [TPS65090_IRQ_OVERLOAD_FET1] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET1, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET1, }, [TPS65090_IRQ_OVERLOAD_FET2] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET2, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET2, }, [TPS65090_IRQ_OVERLOAD_FET3] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET3, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET3, }, [TPS65090_IRQ_OVERLOAD_FET4] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET4, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET4, }, [TPS65090_IRQ_OVERLOAD_FET5] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET5, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET5, }, [TPS65090_IRQ_OVERLOAD_FET6] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET6, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET6, }, [TPS65090_IRQ_OVERLOAD_FET7] = { - .reg_offset = 1, - .mask = TPS65090_INT2_MASK_OVERLOAD_FET7, + .reg_offset = 1, + .mask = TPS65090_INT2_MASK_OVERLOAD_FET7, }, }; @@ -176,7 +176,7 @@ MODULE_DEVICE_TABLE(of, tps65090_of_match); #endif static int tps65090_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct tps65090_platform_data *pdata = dev_get_platdata(&client->dev); int irq_base = 0; @@ -210,11 +210,11 @@ static int tps65090_i2c_probe(struct i2c_client *client, if (client->irq) { ret = regmap_add_irq_chip(tps65090->rmap, client->irq, - IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base, - &tps65090_irq_chip, &tps65090->irq_data); - if (ret) { - dev_err(&client->dev, - "IRQ init failed with err: %d\n", ret); + IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base, + &tps65090_irq_chip, &tps65090->irq_data); + if (ret) { + dev_err(&client->dev, + "IRQ init failed with err: %d\n", ret); return ret; } } else { @@ -223,8 +223,8 @@ static int tps65090_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps65090->dev, -1, tps65090s, - ARRAY_SIZE(tps65090s), NULL, - 0, regmap_irq_get_domain(tps65090->irq_data)); + ARRAY_SIZE(tps65090s), NULL, + 0, regmap_irq_get_domain(tps65090->irq_data)); if (ret) { dev_err(&client->dev, "add mfd devices failed with err: %d\n", ret); -- cgit v1.2.3 From a64ab6b4cd098f6c2ea959fe9bf1fd3f8b13b1f3 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Thu, 6 Nov 2014 11:52:38 +0300 Subject: mfd: tc6393xb: Prepare/unprepare clocks Change clk_enable/disable() calls to clk_prepare_enable() and clk_disable_unrepapre(). Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Lee Jones --- drivers/mfd/tc6393xb.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 0afddf6c37af..d35f11fbeab7 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -665,7 +665,7 @@ static int tc6393xb_probe(struct platform_device *dev) goto err_ioremap; } - ret = clk_enable(tc6393xb->clk); + ret = clk_prepare_enable(tc6393xb->clk); if (ret) goto err_clk_enable; @@ -728,7 +728,7 @@ err_gpio_add: gpiochip_remove(&tc6393xb->gpio); tcpd->disable(dev); err_enable: - clk_disable(tc6393xb->clk); + clk_disable_unprepare(tc6393xb->clk); err_clk_enable: iounmap(tc6393xb->scr); err_ioremap: @@ -759,7 +759,7 @@ static int tc6393xb_remove(struct platform_device *dev) gpiochip_remove(&tc6393xb->gpio); ret = tcpd->disable(dev); - clk_disable(tc6393xb->clk); + clk_disable_unprepare(tc6393xb->clk); iounmap(tc6393xb->scr); release_resource(&tc6393xb->rscr); clk_put(tc6393xb->clk); @@ -787,7 +787,7 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state) ioread8(tc6393xb->scr + SCR_GPI_BCR(i)); } ret = tcpd->suspend(dev); - clk_disable(tc6393xb->clk); + clk_disable_unprepare(tc6393xb->clk); return ret; } @@ -799,7 +799,7 @@ static int tc6393xb_resume(struct platform_device *dev) int ret; int i; - clk_enable(tc6393xb->clk); + clk_prepare_enable(tc6393xb->clk); ret = tcpd->resume(dev); if (ret) -- cgit v1.2.3 From e62cace7b602b29cc9226e64dfb2c47ddfb9558e Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 4 Nov 2014 15:26:22 +0000 Subject: mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable Technically this register is not used on wm8997 however the regmap core requires a continuous block of IRQs. The simplest solution is just to add the register. Signed-off-by: Charles Keepax --- drivers/mfd/wm8997-tables.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c index 510da3b52324..f44d195d4496 100644 --- a/drivers/mfd/wm8997-tables.c +++ b/drivers/mfd/wm8997-tables.c @@ -670,6 +670,7 @@ static const struct reg_default wm8997_reg_default[] = { { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */ { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */ { 0x00000D08, 0xFFFF }, /* R3336 - Interrupt Status 1 Mask */ + { 0x00000D09, 0xFFFF }, /* R3337 - Interrupt Status 2 Mask */ { 0x00000D0A, 0xFFFF }, /* R3338 - Interrupt Status 3 Mask */ { 0x00000D0B, 0xFFFF }, /* R3339 - Interrupt Status 4 Mask */ { 0x00000D0C, 0xFEFF }, /* R3340 - Interrupt Status 5 Mask */ @@ -1328,6 +1329,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg) case ARIZONA_INTERRUPT_STATUS_4: case ARIZONA_INTERRUPT_STATUS_5: case ARIZONA_INTERRUPT_STATUS_1_MASK: + case ARIZONA_INTERRUPT_STATUS_2_MASK: case ARIZONA_INTERRUPT_STATUS_3_MASK: case ARIZONA_INTERRUPT_STATUS_4_MASK: case ARIZONA_INTERRUPT_STATUS_5_MASK: -- cgit v1.2.3 From 47958c5ab4035bd91f05598f76a61cd9f7f2934c Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 4 Nov 2014 15:24:36 +0000 Subject: mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers These registers are documented in the datasheet and used as part of the extcon driver. Expose them properly through regmap as the datasheet notes they should be treated as volatile do so. Signed-off-by: Charles Keepax --- drivers/mfd/wm5102-tables.c | 6 +++-- drivers/mfd/wm5110-tables.c | 4 ++++ drivers/mfd/wm8997-tables.c | 4 ++++ include/linux/mfd/arizona/registers.h | 42 +++++++++++++++++++++++++++++++++++ 4 files changed, 54 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index d6f35bbf795b..b326a82017ee 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -336,8 +336,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */ { 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */ { 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */ - { 0x00000225, 0x0400 }, /* R549 - HP Ctrl 1L */ - { 0x00000226, 0x0400 }, /* R550 - HP Ctrl 1R */ { 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */ { 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */ { 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */ @@ -1112,6 +1110,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: case ARIZONA_MIC_BIAS_CTRL_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_ACCESSORY_DETECT_MODE_1: case ARIZONA_HEADPHONE_DETECT_1: case ARIZONA_HEADPHONE_DETECT_2: @@ -1949,6 +1949,8 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_SCRATCH_1: case ARIZONA_DSP1_SCRATCH_2: case ARIZONA_DSP1_SCRATCH_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_HEADPHONE_DETECT_2: case ARIZONA_HP_DACVAL: case ARIZONA_MIC_DETECT_3: diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 4642b5b816a0..c75390ad4f45 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -1790,6 +1790,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: case ARIZONA_MIC_BIAS_CTRL_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_ACCESSORY_DETECT_MODE_1: case ARIZONA_HEADPHONE_DETECT_1: case ARIZONA_HEADPHONE_DETECT_2: @@ -2825,6 +2827,8 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS: case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS: case ARIZONA_MIC_DETECT_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_HEADPHONE_DETECT_2: case ARIZONA_INPUT_ENABLES_STATUS: case ARIZONA_OUTPUT_STATUS_1: diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c index f44d195d4496..c0c25d75aacc 100644 --- a/drivers/mfd/wm8997-tables.c +++ b/drivers/mfd/wm8997-tables.c @@ -887,6 +887,8 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg) case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: case ARIZONA_MIC_BIAS_CTRL_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_ACCESSORY_DETECT_MODE_1: case ARIZONA_HEADPHONE_DETECT_1: case ARIZONA_HEADPHONE_DETECT_2: @@ -1479,6 +1481,8 @@ static bool wm8997_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_SAMPLE_RATE_3_STATUS: case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS: case ARIZONA_MIC_DETECT_3: + case ARIZONA_HP_CTRL_1L: + case ARIZONA_HP_CTRL_1R: case ARIZONA_HEADPHONE_DETECT_2: case ARIZONA_INPUT_ENABLES_STATUS: case ARIZONA_OUTPUT_STATUS_1: diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index c0b075f6bc35..d521f327b34f 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -125,6 +125,8 @@ #define ARIZONA_MIC_BIAS_CTRL_1 0x218 #define ARIZONA_MIC_BIAS_CTRL_2 0x219 #define ARIZONA_MIC_BIAS_CTRL_3 0x21A +#define ARIZONA_HP_CTRL_1L 0x225 +#define ARIZONA_HP_CTRL_1R 0x226 #define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293 #define ARIZONA_HEADPHONE_DETECT_1 0x29B #define ARIZONA_HEADPHONE_DETECT_2 0x29C @@ -2244,6 +2246,46 @@ #define ARIZONA_MICB3_ENA_SHIFT 0 /* MICB3_ENA */ #define ARIZONA_MICB3_ENA_WIDTH 1 /* MICB3_ENA */ +/* + * R549 (0x225) - HP Ctrl 1L + */ +#define ARIZONA_RMV_SHRT_HP1L 0x4000 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_MASK 0x4000 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_SHIFT 14 /* RMV_SHRT_HP1L */ +#define ARIZONA_RMV_SHRT_HP1L_WIDTH 1 /* RMV_SHRT_HP1L */ +#define ARIZONA_HP1L_FLWR 0x0004 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_MASK 0x0004 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_SHIFT 2 /* HP1L_FLWR */ +#define ARIZONA_HP1L_FLWR_WIDTH 1 /* HP1L_FLWR */ +#define ARIZONA_HP1L_SHRTI 0x0002 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_MASK 0x0002 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_SHIFT 1 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTI_WIDTH 1 /* HP1L_SHRTI */ +#define ARIZONA_HP1L_SHRTO 0x0001 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_MASK 0x0001 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_SHIFT 0 /* HP1L_SHRTO */ +#define ARIZONA_HP1L_SHRTO_WIDTH 1 /* HP1L_SHRTO */ + +/* + * R550 (0x226) - HP Ctrl 1R + */ +#define ARIZONA_RMV_SHRT_HP1R 0x4000 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_MASK 0x4000 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_SHIFT 14 /* RMV_SHRT_HP1R */ +#define ARIZONA_RMV_SHRT_HP1R_WIDTH 1 /* RMV_SHRT_HP1R */ +#define ARIZONA_HP1R_FLWR 0x0004 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_MASK 0x0004 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_SHIFT 2 /* HP1R_FLWR */ +#define ARIZONA_HP1R_FLWR_WIDTH 1 /* HP1R_FLWR */ +#define ARIZONA_HP1R_SHRTI 0x0002 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_MASK 0x0002 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_SHIFT 1 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTI_WIDTH 1 /* HP1R_SHRTI */ +#define ARIZONA_HP1R_SHRTO 0x0001 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_MASK 0x0001 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_SHIFT 0 /* HP1R_SHRTO */ +#define ARIZONA_HP1R_SHRTO_WIDTH 1 /* HP1R_SHRTO */ + /* * R659 (0x293) - Accessory Detect Mode 1 */ -- cgit v1.2.3 From 90f2d0f7bf069b1a2798156b7dcc8e7d1e874406 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 28 Oct 2014 11:06:56 +0100 Subject: mfd: tc3589x: get rid of static base The TC3589x driver is now a device tree-only driver, so we want only dynamic IRQs and GPIO numbers from the tc3589x, no static assignments. Signed-off-by: Linus Walleij --- drivers/gpio/gpio-tc3589x.c | 2 +- drivers/mfd/tc3589x.c | 9 +++------ include/linux/mfd/tc3589x.h | 8 -------- 3 files changed, 4 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c index ae0f6466eb09..abdcf58935f5 100644 --- a/drivers/gpio/gpio-tc3589x.c +++ b/drivers/gpio/gpio-tc3589x.c @@ -262,7 +262,7 @@ static int tc3589x_gpio_probe(struct platform_device *pdev) tc3589x_gpio->chip = template_chip; tc3589x_gpio->chip.ngpio = tc3589x->num_gpio; tc3589x_gpio->chip.dev = &pdev->dev; - tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1; + tc3589x_gpio->chip.base = -1; #ifdef CONFIG_OF_GPIO tc3589x_gpio->chip.of_node = np; diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 0072e668c208..aacb3720065c 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -241,10 +241,8 @@ static struct irq_domain_ops tc3589x_irq_ops = { static int tc3589x_irq_init(struct tc3589x *tc3589x, struct device_node *np) { - int base = tc3589x->irq_base; - tc3589x->domain = irq_domain_add_simple( - np, TC3589x_NR_INTERNAL_IRQS, base, + np, TC3589x_NR_INTERNAL_IRQS, 0, &tc3589x_irq_ops, tc3589x); if (!tc3589x->domain) { @@ -298,7 +296,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_GPIO) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio, ARRAY_SIZE(tc3589x_dev_gpio), NULL, - tc3589x->irq_base, tc3589x->domain); + 0, tc3589x->domain); if (ret) { dev_err(tc3589x->dev, "failed to add gpio child\n"); return ret; @@ -309,7 +307,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_KEYPAD) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad, ARRAY_SIZE(tc3589x_dev_keypad), NULL, - tc3589x->irq_base, tc3589x->domain); + 0, tc3589x->domain); if (ret) { dev_err(tc3589x->dev, "failed to keypad child\n"); return ret; @@ -404,7 +402,6 @@ static int tc3589x_probe(struct i2c_client *i2c, tc3589x->dev = &i2c->dev; tc3589x->i2c = i2c; tc3589x->pdata = pdata; - tc3589x->irq_base = pdata->irq_base; switch (version) { case TC3589X_TC35893: diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h index e6088c2e2092..e1c12d84c26a 100644 --- a/include/linux/mfd/tc3589x.h +++ b/include/linux/mfd/tc3589x.h @@ -164,13 +164,10 @@ struct tc3589x_keypad_platform_data { /** * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data - * @gpio_base: first gpio number assigned to TC3589x. A maximum of - * %TC3589x_NR_GPIOS GPIOs will be allocated. * @setup: callback for board-specific initialization * @remove: callback for board-specific teardown */ struct tc3589x_gpio_platform_data { - int gpio_base; void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base); void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base); }; @@ -178,18 +175,13 @@ struct tc3589x_gpio_platform_data { /** * struct tc3589x_platform_data - TC3589x platform data * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*) - * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used. * @gpio: GPIO-specific platform data * @keypad: keypad-specific platform data */ struct tc3589x_platform_data { unsigned int block; - int irq_base; struct tc3589x_gpio_platform_data *gpio; const struct tc3589x_keypad_platform_data *keypad; }; -#define TC3589x_NR_GPIOS 24 -#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS) - #endif -- cgit v1.2.3 From 783f6fc4cecd770dfdb1418c7c890dbeb3bf3c91 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 4 Nov 2014 13:04:07 +0000 Subject: mfd: wm5110: Add missing registers for AIF2 channels 3-6 When the extra 4 channels were added to AIF2 the necessary frame control registers were not given defaults and marked readable. This patch fixes this. Signed-off-by: Charles Keepax --- drivers/mfd/wm5110-tables.c | 16 ++++++++++++++++ include/linux/mfd/arizona/registers.h | 8 ++++++++ 2 files changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index c75390ad4f45..12cad94b4035 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -895,8 +895,16 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000548, 0x1818 }, /* R1352 - AIF2 Frame Ctrl 2 */ { 0x00000549, 0x0000 }, /* R1353 - AIF2 Frame Ctrl 3 */ { 0x0000054A, 0x0001 }, /* R1354 - AIF2 Frame Ctrl 4 */ + { 0x0000054B, 0x0002 }, /* R1355 - AIF2 Frame Ctrl 5 */ + { 0x0000054C, 0x0003 }, /* R1356 - AIF2 Frame Ctrl 6 */ + { 0x0000054D, 0x0004 }, /* R1357 - AIF2 Frame Ctrl 7 */ + { 0x0000054E, 0x0005 }, /* R1358 - AIF2 Frame Ctrl 8 */ { 0x00000551, 0x0000 }, /* R1361 - AIF2 Frame Ctrl 11 */ { 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */ + { 0x00000553, 0x0002 }, /* R1363 - AIF2 Frame Ctrl 13 */ + { 0x00000554, 0x0003 }, /* R1364 - AIF2 Frame Ctrl 14 */ + { 0x00000555, 0x0004 }, /* R1365 - AIF2 Frame Ctrl 15 */ + { 0x00000556, 0x0005 }, /* R1366 - AIF2 Frame Ctrl 16 */ { 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */ { 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */ { 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */ @@ -1936,8 +1944,16 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_AIF2_FRAME_CTRL_2: case ARIZONA_AIF2_FRAME_CTRL_3: case ARIZONA_AIF2_FRAME_CTRL_4: + case ARIZONA_AIF2_FRAME_CTRL_5: + case ARIZONA_AIF2_FRAME_CTRL_6: + case ARIZONA_AIF2_FRAME_CTRL_7: + case ARIZONA_AIF2_FRAME_CTRL_8: case ARIZONA_AIF2_FRAME_CTRL_11: case ARIZONA_AIF2_FRAME_CTRL_12: + case ARIZONA_AIF2_FRAME_CTRL_13: + case ARIZONA_AIF2_FRAME_CTRL_14: + case ARIZONA_AIF2_FRAME_CTRL_15: + case ARIZONA_AIF2_FRAME_CTRL_16: case ARIZONA_AIF2_TX_ENABLES: case ARIZONA_AIF2_RX_ENABLES: case ARIZONA_AIF3_BCLK_CTRL: diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index d521f327b34f..aacc10d7789c 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -281,8 +281,16 @@ #define ARIZONA_AIF2_FRAME_CTRL_2 0x548 #define ARIZONA_AIF2_FRAME_CTRL_3 0x549 #define ARIZONA_AIF2_FRAME_CTRL_4 0x54A +#define ARIZONA_AIF2_FRAME_CTRL_5 0x54B +#define ARIZONA_AIF2_FRAME_CTRL_6 0x54C +#define ARIZONA_AIF2_FRAME_CTRL_7 0x54D +#define ARIZONA_AIF2_FRAME_CTRL_8 0x54E #define ARIZONA_AIF2_FRAME_CTRL_11 0x551 #define ARIZONA_AIF2_FRAME_CTRL_12 0x552 +#define ARIZONA_AIF2_FRAME_CTRL_13 0x553 +#define ARIZONA_AIF2_FRAME_CTRL_14 0x554 +#define ARIZONA_AIF2_FRAME_CTRL_15 0x555 +#define ARIZONA_AIF2_FRAME_CTRL_16 0x556 #define ARIZONA_AIF2_TX_ENABLES 0x559 #define ARIZONA_AIF2_RX_ENABLES 0x55A #define ARIZONA_AIF2_FORCE_WRITE 0x55B -- cgit v1.2.3 From 21cf3318d675b6ceeb5a3ed82ffe467a2b6eaee4 Mon Sep 17 00:00:00 2001 From: Laurentiu Palcu Date: Fri, 7 Nov 2014 14:45:14 +0200 Subject: mfd: dln2: add support for USB-SPI module Signed-off-by: Laurentiu Palcu --- drivers/mfd/dln2.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index 559e6cc3e022..6d49685d4ee4 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -52,6 +52,7 @@ enum dln2_handle { DLN2_HANDLE_CTRL, DLN2_HANDLE_GPIO, DLN2_HANDLE_I2C, + DLN2_HANDLE_SPI, DLN2_HANDLES }; @@ -640,6 +641,12 @@ static struct dln2_platform_data dln2_pdata_i2c = { .port = 0, }; +/* Only one SPI port supported */ +static struct dln2_platform_data dln2_pdata_spi = { + .handle = DLN2_HANDLE_SPI, + .port = 0, +}; + static const struct mfd_cell dln2_devs[] = { { .name = "dln2-gpio", @@ -651,6 +658,11 @@ static const struct mfd_cell dln2_devs[] = { .platform_data = &dln2_pdata_i2c, .pdata_size = sizeof(struct dln2_platform_data), }, + { + .name = "dln2-spi", + .platform_data = &dln2_pdata_spi, + .pdata_size = sizeof(struct dln2_platform_data), + }, }; static void dln2_disconnect(struct usb_interface *interface) -- cgit v1.2.3 From 7263bd39251e6926ca7fa5591679b26577fdaccb Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 17 Nov 2014 18:07:43 +0300 Subject: mfd: tc6387xb: prepare/unprepare clocks Change clk_enable/disable() calls to clk_prepare_enable() and clk_disable_unprepare(). Signed-off-by: Dmitry Eremin-Solenikov --- drivers/mfd/tc6387xb.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index e71f88000ae5..85fab3729102 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -52,7 +52,7 @@ static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state) if (pdata && pdata->suspend) pdata->suspend(dev); - clk_disable(tc6387xb->clk32k); + clk_disable_unprepare(tc6387xb->clk32k); return 0; } @@ -62,7 +62,7 @@ static int tc6387xb_resume(struct platform_device *dev) struct tc6387xb *tc6387xb = platform_get_drvdata(dev); struct tc6387xb_platform_data *pdata = dev_get_platdata(&dev->dev); - clk_enable(tc6387xb->clk32k); + clk_prepare_enable(tc6387xb->clk32k); if (pdata && pdata->resume) pdata->resume(dev); @@ -100,7 +100,7 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc) struct platform_device *dev = to_platform_device(mmc->dev.parent); struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_enable(tc6387xb->clk32k); + clk_prepare_enable(tc6387xb->clk32k); tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0, tc6387xb_mmc_resources[0].start & 0xfffe); @@ -113,7 +113,7 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc) struct platform_device *dev = to_platform_device(mmc->dev.parent); struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_disable(tc6387xb->clk32k); + clk_disable_unprepare(tc6387xb->clk32k); return 0; } @@ -214,7 +214,7 @@ static int tc6387xb_remove(struct platform_device *dev) mfd_remove_devices(&dev->dev); iounmap(tc6387xb->scr); release_resource(&tc6387xb->rscr); - clk_disable(tc6387xb->clk32k); + clk_disable_unprepare(tc6387xb->clk32k); clk_put(tc6387xb->clk32k); kfree(tc6387xb); -- cgit v1.2.3 From 71d679b84ce8ca3207e547488f70c259575d2f2f Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 17 Nov 2014 18:07:42 +0300 Subject: mfd: t7l66xb: prepare/unprepare clocks Change clk_enable/disable() calls to clk_prepare_enable() and clk_disable_unprepare(). Signed-off-by: Dmitry Eremin-Solenikov --- drivers/mfd/t7l66xb.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 9e04a7485981..439d905bb219 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -87,7 +87,7 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc) unsigned long flags; u8 dev_ctl; - clk_enable(t7l66xb->clk32k); + clk_prepare_enable(t7l66xb->clk32k); spin_lock_irqsave(&t7l66xb->lock, flags); @@ -118,7 +118,7 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc) spin_unlock_irqrestore(&t7l66xb->lock, flags); - clk_disable(t7l66xb->clk32k); + clk_disable_unprepare(t7l66xb->clk32k); return 0; } @@ -285,7 +285,7 @@ static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state) if (pdata && pdata->suspend) pdata->suspend(dev); - clk_disable(t7l66xb->clk48m); + clk_disable_unprepare(t7l66xb->clk48m); return 0; } @@ -295,7 +295,7 @@ static int t7l66xb_resume(struct platform_device *dev) struct t7l66xb *t7l66xb = platform_get_drvdata(dev); struct t7l66xb_platform_data *pdata = dev_get_platdata(&dev->dev); - clk_enable(t7l66xb->clk48m); + clk_prepare_enable(t7l66xb->clk48m); if (pdata && pdata->resume) pdata->resume(dev); @@ -369,7 +369,7 @@ static int t7l66xb_probe(struct platform_device *dev) goto err_ioremap; } - clk_enable(t7l66xb->clk48m); + clk_prepare_enable(t7l66xb->clk48m); if (pdata && pdata->enable) pdata->enable(dev); @@ -414,9 +414,9 @@ static int t7l66xb_remove(struct platform_device *dev) int ret; ret = pdata->disable(dev); - clk_disable(t7l66xb->clk48m); + clk_disable_unprepare(t7l66xb->clk48m); clk_put(t7l66xb->clk48m); - clk_disable(t7l66xb->clk32k); + clk_disable_unprepare(t7l66xb->clk32k); clk_put(t7l66xb->clk32k); t7l66xb_detach_irq(dev); iounmap(t7l66xb->scr); -- cgit v1.2.3 From 0e50e92669357e4702fcd6a85e2f0d6e92295664 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 11 Nov 2014 12:36:46 +0000 Subject: mfd: axp20x: Constify axp20x_acpi_match and rid unused warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit axp20x.c:239:30: warning: ‘axp20x_acpi_match’ defined but not used [-Wunused-variable] Signed-off-by: Lee Jones --- drivers/mfd/axp20x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 971b0eb8d821..c522ee22b1c0 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -236,7 +236,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); -static struct acpi_device_id axp20x_acpi_match[] = { +static const struct acpi_device_id axp20x_acpi_match[] = { { .id = "INT33F4", .driver_data = AXP288_ID, -- cgit v1.2.3 From 2c20f6de95afef89127163d16c88cd0456c48077 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 12 Nov 2014 16:28:02 +0100 Subject: mfd: max14577: Fix obvious typo in company name in copyright Fix a typo in name of company in copyright comment. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- drivers/mfd/max14577.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c index de96b7fb1f6d..3bf8def82f1e 100644 --- a/drivers/mfd/max14577.c +++ b/drivers/mfd/max14577.c @@ -1,7 +1,7 @@ /* * max14577.c - mfd core driver for the Maxim 14577/77836 * - * Copyright (C) 2014 Samsung Electrnoics + * Copyright (C) 2014 Samsung Electronics * Chanwoo Choi * Krzysztof Kozlowski * -- cgit v1.2.3 From 439b8bddaa1ebed9f9f8fb2f6f33f5e639d76ab8 Mon Sep 17 00:00:00 2001 From: Dmitry Lavnikevich Date: Fri, 21 Nov 2014 18:29:07 +0300 Subject: mfd: da9063: Get irq base dynamically before registering device After registering mfd device with proper irq_base platform_get_irq_byname() calls will return VIRQ instead of local IRQ. This fixes da9063 rtc registration issue: da9063-rtc da9063-rtc: Failed to request ALARM IRQ 1: -22 Signed-off-by: Dmitry Lavnikevich Signed-off-by: Lee Jones --- drivers/mfd/da9063-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index 93db8bb8c8f0..f38bc98a3c57 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -118,7 +118,7 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) da9063->irq_base = pdata->irq_base; } else { da9063->flags = 0; - da9063->irq_base = 0; + da9063->irq_base = -1; } da9063->chip_irq = irq; @@ -168,6 +168,8 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) return ret; } + da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq); + ret = mfd_add_devices(da9063->dev, -1, da9063_devs, ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base, NULL); -- cgit v1.2.3 From 292aabb1da506b53eed904330add3dabfffd96e5 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 1 Dec 2014 11:52:36 +0100 Subject: mfd: atmel-hlcdc: Add Kconfig option description and name The MFD_ATMEL_HLCDC was first intended to be selected by its sub-devices but these sub-devices now depends on this option, we thus need to add a name and a description so that users can see it. Signed-off-by: Boris Brezillon Acked-by: Nicolas Ferre Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 72d38081f779..2e6b7311fabc 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -60,10 +60,15 @@ config MFD_AAT2870_CORE functionality of the device. config MFD_ATMEL_HLCDC - tristate + tristate "Atmel HLCDC (High-end LCD Controller)" select MFD_CORE select REGMAP_MMIO depends on OF + help + If you say yes here you get support for the HLCDC block. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. config MFD_BCM590XX tristate "Broadcom BCM590xx PMUs" -- cgit v1.2.3