From 89fd8ee86c02735b67d9113d55375861cca2ef19 Mon Sep 17 00:00:00 2001 From: Maksim Salau Date: Mon, 13 Feb 2017 15:14:34 +0300 Subject: USB: serial: upd78f0730: add ID for EVAL-ADXL362Z The adaptor on Analog Devices EVAL-ADXL362Z development board is used to flash and debug firmware of on-board Renesas RL78/G13 MCU. Also added support of the 153600 baud rate, since the stock firmware uses it. Signed-off-by: Maksim Salau Signed-off-by: Johan Hovold --- drivers/usb/serial/upd78f0730.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c index 55b9a18b6c38..f1e6c07ffc81 100644 --- a/drivers/usb/serial/upd78f0730.c +++ b/drivers/usb/serial/upd78f0730.c @@ -17,7 +17,7 @@ * - stop bits: 1 or 2 * - parity: even, odd or none * - flow control: none - * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200 + * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 * - signals: DTR, RTS and BREAK */ @@ -34,6 +34,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */ { USB_DEVICE(0x0409, 0x0063) }, /* V850ESJX3-STICK */ + { USB_DEVICE(0x064B, 0x7825) }, /* Analog Devices EVAL-ADXL362Z-DB */ {} }; @@ -288,7 +289,7 @@ static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty) { const speed_t baud_rate = tty_get_baud_rate(tty); const speed_t supported[] = { - 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200 + 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 }; int i; -- cgit v1.2.3