From 04c16b84e49a6d609c88f4f5523237ece3612b74 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Tue, 12 Jul 2016 11:26:43 +0530 Subject: regulator: s2mps11: Fix the voltage linear range for s2mps15 This patch fixes some of the LDOs and BUCKs voltage range as per user manual of s2mps15 (REV0.4). Fixes: 51af20675800 ("regulator: s2mps11: Add support for S2MPS15 regulators") Signed-off-by: Alim Akhtar Signed-off-by: Mark Brown Cc: --- drivers/regulator/s2mps11.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 02fb6b4ea820..d838e77dd947 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -750,7 +750,7 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = { /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = { - REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000), + REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000), }; /* voltage range for s2mps15 LDO 1 */ @@ -760,12 +760,12 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = { /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */ static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = { - REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250), + REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250), }; /* voltage range for s2mps15 BUCK 8, 9 and 10 */ static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = { - REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500), + REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500), }; static const struct regulator_desc s2mps15_regulators[] = { -- cgit v1.2.3 From 707319b60ade4fefa4fc31138f4147f2a5abb88b Mon Sep 17 00:00:00 2001 From: Steve Twiss Date: Wed, 20 Jul 2016 15:53:58 +0100 Subject: regulator: da9053/52: Fix incorrectly stated minimum and maximum voltage limits This fix alters the minimum and maximum BUCK voltage limits for DA9052 and DA9053. It does so for the following cases: DA9052 - BUCK3 (MEM) min: 0.925V -> 0.950V max: 2.500V -> 2.525V DA9053 - BUCK3 (MEM) min: 0.925V -> 0.950V max: 2.500V -> 2.525V - BUCK4 (PERI) min: 0.925V -> 0.950V max: 2.500V -> 2.525V The voltage range remains the same, but the limits are shifted by +0.025V. This change is provided on DA9052:MEM, DA9053:MEM and DA9053:PERI and is a voltage difference of 0.025V, compared to those measured before this fix is applied. The patch has the effect of decreasing *all* measured voltages on those BUCKs when compared against the previously measured values for the same software voltage request. For example, with this fix applied for DA9052:MEM, DA9053:MEM and DA9053:PERI, the following is true. Because the previous software defined slot 0 as being 0.925V, if a request for 0.950V was previously sent, the slot 1 voltage would have been used. This would have corresponded to an actual measured voltage of 0.975V. But, with this patch fix, and with slot 0 properly aligned to 0.950V, if a voltage of 0.950V is requested by software, a measured value of 0.950V will be provided. Tested-by: Steve Twiss Signed-off-by: Steve Twiss Signed-off-by: Mark Brown --- drivers/regulator/da9052-regulator.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 1050cb77561a..9ececfef42d6 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -333,7 +333,7 @@ static const struct regulator_ops da9052_ldo_ops = { static struct da9052_regulator_info da9052_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), - DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), @@ -350,8 +350,8 @@ static struct da9052_regulator_info da9052_regulator_info[] = { static struct da9052_regulator_info da9053_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), - DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), - DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0), + DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), -- cgit v1.2.3