From 812089e01b9f65f90fc8fc670d8cce72a0e01fbb Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Sat, 1 Dec 2012 12:37:20 -0800 Subject: PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski Signed-off-by: Bjorn Helgaas Acked-by: Chris Ball CC: Manoj Iyer CC: stable@vger.kernel.org --- drivers/pci/quirks.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/pci/quirks.c') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 8f7a6344e79e..0369fb6fc1da 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2725,7 +2725,7 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) if (PCI_FUNC(dev->devfn)) return; /* - * RICOH 0xe823 SD/MMC card reader fails to recognize + * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize * certain types of SD/MMC cards. Lowering the SD base * clock frequency from 200Mhz to 50Mhz fixes this issue. * @@ -2736,7 +2736,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) * 0xf9 - Key register for 0x150 * 0xfc - key register for 0xe1 */ - if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { + if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || + dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { pci_write_config_byte(dev, 0xf9, 0xfc); pci_write_config_byte(dev, 0x150, 0x10); pci_write_config_byte(dev, 0xf9, 0x00); @@ -2763,6 +2764,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ -- cgit v1.2.3