From c1b78d05b3281d6f84284d421fc20eed8b8b78ce Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 8 May 2007 07:26:22 +1000 Subject: [POWERPC] Generalize tsi108 PHY types Add a phy_type field to the tsi108 ethernet structures to indicate which PHY is used on a board. This is derived from the "compatible" property in the ethernet-phy node of the device tree. The default remains the MV88E PHY. Also, convert the setup code to use of_get_mac_address instead of hard coding a lookup for the "address" property in the ethernet node. Signed-off-by: Josh Boyer Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- drivers/net/tsi108_eth.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/net/tsi108_eth.c') diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 0bfc2c9c1c08..1aabc91f6458 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -82,6 +82,7 @@ struct tsi108_prv_data { unsigned int phy; /* Index of PHY for this interface */ unsigned int irq_num; unsigned int id; + unsigned int phy_type; struct timer_list timer;/* Timer that triggers the check phy function */ unsigned int rxtail; /* Next entry in rxring to read */ @@ -1256,11 +1257,11 @@ static void tsi108_init_phy(struct net_device *dev) if (i == 0) printk(KERN_ERR "%s function time out \n", __FUNCTION__); -#if (TSI108_PHY_TYPE == PHY_BCM54XX) /* Broadcom BCM54xx PHY */ - tsi108_write_mii(data, 0x09, 0x0300); - tsi108_write_mii(data, 0x10, 0x1020); - tsi108_write_mii(data, 0x1c, 0x8c00); -#endif + if (data->phy_type == TSI108_PHY_BCM54XX) { + tsi108_write_mii(data, 0x09, 0x0300); + tsi108_write_mii(data, 0x10, 0x1020); + tsi108_write_mii(data, 0x1c, 0x8c00); + } tsi108_write_mii(data, MII_BMCR, @@ -1587,6 +1588,7 @@ tsi108_init_one(struct platform_device *pdev) data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if); data->phy = einfo->phy; + data->phy_type = einfo->phy_type; data->irq_num = einfo->irq_num; data->id = pdev->id; dev->open = tsi108_open; -- cgit v1.2.3