From 0742c2a6335281608ac9e9aee67493e9e30f6195 Mon Sep 17 00:00:00 2001 From: Patrick Rudolph Date: Tue, 7 Mar 2023 13:12:45 +0100 Subject: mfd: max597x: Add support for MAX5970 and MAX5978 Implement a regulator driver with IRQ support for fault management. Written against documentation [1] and [2] and tested on real hardware. Every channel has it's own regulator supply nammed 'vss1-supply' and 'vss2-supply'. The regulator supply is used to determine the output voltage, as the smart switch provides no output regulation. The driver requires the 'shunt-resistor-micro-ohms' to be present in the devicetree to properly calculate current related values. You must specify compatible devictree layout: regulator@3a { reg = <0x3a>; vss1-supply = <&p3v3>; compatible = "maxim,max5978"; ... regulators { sw0_ref: SW0 { regulator-compatible = "SW0"; shunt-resistor-micro-ohms = <12000>; ... } } } 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf ... Changes in V12: - Use simple_mfd_i2c driver and remove previous implementation. - Remove newline - Use _MFD_MAX597X_H in header file - Successfull build need following patch from regulator: https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@9elements.com https://lore.kernel.org/r/20230210163225.1208035-1-Naresh.Solanki@9elements.com Signed-off-by: Patrick Rudolph Signed-off-by: Marcello Sylvester Bauer Signed-off-by: Naresh Solanki Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20230307121246.127425-2-Naresh.Solanki@9elements.com --- drivers/mfd/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/mfd/Kconfig') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index fcc141e067b9..d381d0e63455 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -266,6 +266,16 @@ config MFD_MADERA_SPI Support for the Cirrus Logic Madera platform audio SoC core functionality controlled via SPI. +config MFD_MAX597X + tristate "Maxim 597x power switch and monitor" + depends on (I2C && OF) + select MFD_SIMPLE_MFD_I2C + help + This driver controls a Maxim 5970/5978 switch via I2C bus. + The MAX5970/5978 is a smart switch with no output regulation, but + fault protection and voltage and current monitoring capabilities. + Also it supports upto 4 indication leds. + config MFD_CS47L15 bool "Cirrus Logic CS47L15" select PINCTRL_CS47L15 -- cgit v1.2.3