From f2cd204f2d2973cf5a5ebd762910431921e56064 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sun, 29 Sep 2013 16:40:15 -0300 Subject: ARM: mvebu: config: Add GPIO connected LEDs support to defconfig Almost every mvebu board has at least one LED connected to a GPIO line. Include this in the default configuration. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/configs/mvebu_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 594d706b641f..6fcb5c88a643 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -69,6 +69,7 @@ CONFIG_USB_XHCI_HCD=y CONFIG_MMC=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y +CONFIG_LEDS_GPIO=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y -- cgit v1.2.3 From 9ec1acb88698d3b5f181fe8621d259c59b392e49 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 30 Oct 2013 17:55:10 +0100 Subject: ARM: kirkwood: enable HIGHMEM in defconfig The Kirkwood-based OpenBlocks A7 platform has 1 GB of memory. To make use of this memory completely, enabling HIGHMEM is needed, so we enable it by default in the kirkwood_defconfig. Signed-off-by: Thomas Petazzoni Acked-by: Andrew Lunn Acked-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/configs/kirkwood_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0ae0eaebf6b2..2e762d94e94b 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -27,6 +27,7 @@ CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_FREQ=y -- cgit v1.2.3 From a6b1135265e9aa28f3860337413eb5011acf9528 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 2 Oct 2013 15:06:25 +0900 Subject: ARM: shmobile: Genmai defconfig Add a defconfig for the Genmai board. In the future this board will use a shared defconfig for multiplatform, but until CCF is implemented this will be used. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/configs/genmai_defconfig | 116 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 arch/arm/configs/genmai_defconfig (limited to 'arch') diff --git a/arch/arm/configs/genmai_defconfig b/arch/arm/configs/genmai_defconfig new file mode 100644 index 000000000000..69b1531a4c80 --- /dev/null +++ b/arch/arm/configs/genmai_defconfig @@ -0,0 +1,116 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R7S72100=y +CONFIG_MACH_GENMAI=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_NETDEVICES=y +# CONFIG_NET_CORE is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_SH_ETH=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=10 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=y +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set -- cgit v1.2.3 From 03248fde88e37b1b043b640b1bae4fb14d4d3f23 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 3 Oct 2013 18:30:30 -0700 Subject: ARM: shmobile: bockw: enable CONFIG_REGULATOR CONFIG_REGULATOR is required from MMCIF and SMSC Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/configs/bockw_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index b38cd107f82d..6583683492bd 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -82,6 +82,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HWMON is not set CONFIG_I2C=y CONFIG_I2C_RCAR=y +CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y -- cgit v1.2.3 From 851f0cda469fdba6371ab2e268462aeb8393f08e Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: bockw: Do not set command line in defconfig As a set towards moving shmobile towards multi-platform the kernel command line should be set in the DTB rather than in the kernel config. bockw already has the command line present in its DTS file but it was being overrirden by the kernel config. A side effect of this change is that "rw" is now present on the command line which allows a boot using nfs root to succeed in the case where userspace expects to be able to write to the root filesystem. Signed-off-by: Simon Horman --- arch/arm/configs/bockw_defconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index 6583683492bd..b35301fa9685 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -27,8 +27,6 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp" -CONFIG_CMDLINE_FORCE=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set CONFIG_PM_RUNTIME=y -- cgit v1.2.3 From 7a14b78831d34b63032de1bb4d05221ed20cb0cf Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: marzen: Do not set command line in defconfig As a set towards moving shmobile towards multi-platform the kernel command line should be set in the DTB rather than in the kernel config. marzen already has the command line present in its DTS file but it was being overrirden by the kernel config. Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 5cc6360340b1..103b8755d1a6 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -30,8 +30,6 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on" -CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y -- cgit v1.2.3 From 5cff9680d4919a521d071b4cea33aad50a60fefa Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: bockw: Do not disable CONFIG_INOTIFY_USER in defconfig CONFIG_INOTIFY_USER is required for udev to function. This change brings the bockw defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/bockw_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index b35301fa9685..63e8bcd0b2be 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -111,7 +111,6 @@ CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y -- cgit v1.2.3 From 96ffa476493d90f2c0583ed90640acc9ef9fff06 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: marzen: Do not disable CONFIG_INOTIFY_USER in defconfig CONFIG_INOTIFY_USER is required for udev to function. This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 103b8755d1a6..ebaaeada733d 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -108,7 +108,6 @@ CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y -- cgit v1.2.3 From 5a14cbb732a6a4eff2a0be59deba6fdb890253b8 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: bockw: Enable CONFIG_VFP in defconfig CONFIG_VFP is required to boot into a Debian armhf user-space. This change brings the bockw defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/bockw_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index 63e8bcd0b2be..8b5866e6292d 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -27,6 +27,7 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y +CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set CONFIG_PM_RUNTIME=y -- cgit v1.2.3 From 8f1c35732942035ea9bfff6d6848490b0131d140 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: marzen: Enable CONFIG_VFP in defconfig CONFIG_VFP is required to boot into a Debian armhf user-space. This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index ebaaeada733d..39e2dfebcf50 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -30,6 +30,7 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y +CONFIG_VFP=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y -- cgit v1.2.3 From e14ee5deab24200e4b70fe31a8c806f0acd3d37c Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: bockw: Do not enable CONFIG_DEVTMPFS defconfig This change brings the bockw defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/bockw_defconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index 8b5866e6292d..01721fafcea1 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -43,8 +43,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set -- cgit v1.2.3 From 41307133da4b6f242ecbb45950b9d043c0b21b96 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfig This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 39e2dfebcf50..3f0f41f8ba30 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -42,8 +42,6 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set -- cgit v1.2.3 From 66d0a50ea15a5a05372e9f8bb0fa7bdc873e4179 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: bockw: Enable CONFIG_PACKET in defconfig CONFIG_PACKET is required for the ISC dhcpd daemon function. This change brings the bockw defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/bockw_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index 01721fafcea1..191decba86c4 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -32,6 +32,7 @@ CONFIG_VFP=y # CONFIG_SUSPEND is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y -- cgit v1.2.3 From d4df4b2716336d24e243013c5e64b867c18ccc29 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: marzen: Enable CONFIG_PACKET in defconfig CONFIG_PACKET is required for the ISC dhcpd daemon function. This change brings the marzen defconfig into line with other shmobile defconfigs. Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 3f0f41f8ba30..a423badba241 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -35,6 +35,7 @@ CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y -- cgit v1.2.3 From f3a3d2cfb7fb10e2e23d02abb5459ff974f2c8bd Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 15:12:17 +0900 Subject: ARM: shmobile: marzen: Do not enable CONFIG_SMC911X in defconfig CONFIG_SMC911X is not needed by marzen. It appears to have been accidently enabled as well as CONFIG_SMSC911X which is needed by marzen. Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index a423badba241..9ce38f6931e5 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -59,7 +59,6 @@ CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_SMC911X=y CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set -- cgit v1.2.3 From 96c4f31f955bd35e33bae1e11a5e614f5c7163cd Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 29 Sep 2013 00:12:33 +0400 Subject: ARM: shmobile: marzen: enable HPB-DMAC in defconfig Enable HPB-DMAC driver in 'marzen_defconfig'. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/configs/marzen_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 9ce38f6931e5..dd4aced59d3c 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -103,6 +103,8 @@ CONFIG_USB_STORAGE=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_DMADEVICES=y +CONFIG_RCAR_HPB_DMAE=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set -- cgit v1.2.3 From 885484af398d11c21e4927dc33a2994927de6c5a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 29 Sep 2013 00:11:28 +0400 Subject: ARM: shmobile: bockw: enable HPB-DMAC in defconfig Enable HPB-DMAC driver in 'bockw_defconfig'. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/configs/bockw_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig index 191decba86c4..8110d8a653f7 100644 --- a/arch/arm/configs/bockw_defconfig +++ b/arch/arm/configs/bockw_defconfig @@ -107,6 +107,8 @@ CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RX8581=y +CONFIG_DMADEVICES=y +CONFIG_RCAR_HPB_DMAE=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set -- cgit v1.2.3 From 577092b3d11530acd8467074f6ea7e2dd36b5028 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Sat, 9 Nov 2013 08:47:45 +0900 Subject: ARM: shmobile: kzm9d: Enable AUTO_ZRELADDR in defconfig This is required to allow the load address to be supplied as an environment variable when building a uImage. LOADADDR=0x40008000 ARCH=arm make uImage This is necessary since "ARM: shmobile: Remove legacy KZM9D board code" Signed-off-by: Simon Horman --- arch/arm/configs/kzm9d_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig index 6c37f4a98eb8..e6aed23ac083 100644 --- a/arch/arm/configs/kzm9d_defconfig +++ b/arch/arm/configs/kzm9d_defconfig @@ -32,6 +32,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y +CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y -- cgit v1.2.3 From 081aaf4ab3ddaf66083b2fcd17b563a48112a232 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 20 Nov 2013 23:21:26 -0800 Subject: ARM: shmobile: lager: add gpio regulator support on defconfig Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/configs/lager_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig index 35bff5e0d57a..064b7cc5f241 100644 --- a/arch/arm/configs/lager_defconfig +++ b/arch/arm/configs/lager_defconfig @@ -89,6 +89,7 @@ CONFIG_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y # CONFIG_USB_SUPPORT is not set -- cgit v1.2.3 From 04a25dfb7956284029b486b5c72657ebbf7b8c85 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:15:23 -0800 Subject: ARM: dts: Add basic device tree support for omap2430 sdp MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I doubt that there are many people using 2430 sdp, but as that's been historically an important acid test platform for omap2+ related changes, let's add minimal device tree support for it. If anybody is using it beyond minimal boot testing, patches for more complete device tree support are welcome. Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap2430-sdp.dts | 49 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+) create mode 100644 arch/arm/boot/dts/omap2430-sdp.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d57c1a65b24f..73022b113cd1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap2430-sdp.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-devkit8000.dtb \ diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts new file mode 100644 index 000000000000..2c90d29b4cad --- /dev/null +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap2430.dtsi" + +/ { + model = "TI OMAP2430 SDP"; + compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; +}; + +&i2c2 { + clock-frequency = <100000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + }; +}; + +#include "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +&gpmc { + ranges = <5 0 0x08000000 0x01000000>; + ethernet@gpmc { + compatible = "smsc,lan91c94"; + interrupt-parent = <&gpio5>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */ + reg = <5 0x300 0xf>; + bank-width = <2>; + gpmc,mux-add-data; + }; +}; + -- cgit v1.2.3 From a900f51646f5e77b5a7fc164bfb10eed55497861 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:15:24 -0800 Subject: ARM: dts: Add basic Nokia N8X0 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add minimal device tree support for n8x0 boards so we can make omap2 device tree only. Note that we still need to initialize various platform data quirks to keep things working until n8x0 drivers support device tree. Here's a rough todo list for the people using n8x0: 1. Update menelaus for device tree and set up regulators at least for the MMC driver 2. Remove the MMC regulator platform data callback by using the Menlaus regulators directly in the driver passed from the .dts file 3. Update GPMC connected devices for onenand and tusb6010 for device tree We're planning to remove all legacy platform data for mach-omap2 over next few merge cycles, so if people are still using n8x0, please fix the issues above. Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 3 +++ arch/arm/boot/dts/omap2420-n800.dts | 8 +++++++ arch/arm/boot/dts/omap2420-n810-wimax.dts | 8 +++++++ arch/arm/boot/dts/omap2420-n810.dts | 8 +++++++ arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 34 +++++++++++++++++++++++++++++ 5 files changed, 61 insertions(+) create mode 100644 arch/arm/boot/dts/omap2420-n800.dts create mode 100644 arch/arm/boot/dts/omap2420-n810-wimax.dts create mode 100644 arch/arm/boot/dts/omap2420-n810.dts create mode 100644 arch/arm/boot/dts/omap2420-n8x0-common.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 73022b113cd1..de37094ff3f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -174,6 +174,9 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-clp.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap2430-sdp.dtb \ + omap2420-n800.dtb \ + omap2420-n810.dtb \ + omap2420-n810-wimax.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-devkit8000.dtb \ diff --git a/arch/arm/boot/dts/omap2420-n800.dts b/arch/arm/boot/dts/omap2420-n800.dts new file mode 100644 index 000000000000..d8c1b423606a --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n800.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "omap2420-n8x0-common.dtsi" + +/ { + model = "Nokia N800"; + compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2"; +}; diff --git a/arch/arm/boot/dts/omap2420-n810-wimax.dts b/arch/arm/boot/dts/omap2420-n810-wimax.dts new file mode 100644 index 000000000000..6b25b0359ac9 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n810-wimax.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "omap2420-n8x0-common.dtsi" + +/ { + model = "Nokia N810 WiMax"; + compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2"; +}; diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts new file mode 100644 index 000000000000..21baec154b78 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "omap2420-n8x0-common.dtsi" + +/ { + model = "Nokia N810"; + compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2"; +}; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi new file mode 100644 index 000000000000..c5396933d026 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -0,0 +1,34 @@ +#include "omap2420.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; + + ocp { + i2c@0 { + compatible = "i2c-cbus-gpio"; + gpios = <&gpio3 2 0 /* gpio66 clk */ + &gpio3 1 0 /* gpio65 dat */ + &gpio3 0 0 /* gpio64 sel */ + >; + #address-cells = <1>; + #size-cells = <0>; + retu_mfd: retu@1 { + compatible = "retu-mfd"; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + reg = <0x1>; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; +}; + +&i2c2 { + clock-frequency = <400000>; +}; -- cgit v1.2.3 From bd5fc6fa657cfe4b2de6e0f6e4daae41217392bd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:15:39 -0800 Subject: ARM: dts: Add basic support for omap3 LDP zoom1 labrador MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen and GPIO keys work. For twl4030-keypad we're still missing the binding, but support for that should be trivial to add once the driver has been updated. MUSB I'm pretty sure I got got to enumerate once, but I suspect the battery charging somehow disrupts it and it's not enumerating in general for some reason. Patches are welcome to improve things if people are still using this board. For reference, here's some more info on this old board: http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-ldp.dts | 231 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 232 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-ldp.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index de37094ff3f2..fc37bca0ccd3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ + omap3-ldp.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts new file mode 100644 index 000000000000..ddce0d807f70 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -0,0 +1,231 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx.dtsi" +#include "omap-gpmc-smsc911x.dtsi" + +/ { + model = "TI OMAP3430 LDP (Zoom1 Labrador)"; + compatible = "ti,omap3-ldp", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; /* 128 MB */ + }; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + + key_enter { + label = "enter"; + gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */ + linux,code = <0x0107001c>; /* KEY_ENTER */ + gpio-key,wakeup; + }; + + key_f1 { + label = "f1"; + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */ + linux,code = <0x0303003b>; /* KEY_F1 */ + gpio-key,wakeup; + }; + + key_f2 { + label = "f2"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */ + linux,code = <0x0403003c>; /* KEY_F2 */ + gpio-key,wakeup; + }; + + key_f3 { + label = "f3"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */ + linux,code = <0x0503003d>; /* KEY_F3 */ + gpio-key,wakeup; + }; + + key_f4 { + label = "f4"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */ + linux,code = <0x0704003e>; /* KEY_F4 */ + gpio-key,wakeup; + }; + + key_left { + label = "left"; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ + linux,code = <0x04070069>; /* KEY_LEFT */ + gpio-key,wakeup; + }; + + key_right { + label = "right"; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */ + linux,code = <0x0507006a>; /* KEY_RIGHT */ + gpio-key,wakeup; + }; + + key_up { + label = "up"; + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */ + linux,code = <0x06070067>; /* KEY_UP */ + gpio-key,wakeup; + }; + + key_down { + label = "down"; + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */ + linux,code = <0x0707006c>; /* KEY_DOWN */ + gpio-key,wakeup; + }; + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>, + <1 0 0x08000000 0x01000000>; + + nand@0,0 { + linux,mtd-name= "micron,nand"; + reg = <0 0 0>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x140000>; + }; + partition@1c0000 { + label = "Environment"; + reg = <0x1c0000 0x40000>; + }; + partition@200000 { + label = "Kernel"; + reg = <0x200000 0x1e00000>; + }; + partition@2000000 { + label = "Filesystem"; + reg = <0x2000000 0xe000000>; + }; + }; + + ethernet@gpmc { + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + reg = <1 0 0xff>; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */ + 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */ + 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */ + 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */ + 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */ + 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */ + 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */ + 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */ + 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ + >; + }; + + musb_pins: pinmux_musb_pins { + pinctrl-single,pins = < + 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ + 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ + 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ + 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ + 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ + 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ + 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ + 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ + 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ + 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ + 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ + 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ + >; + }; +}; + +&usb_otg_hs { + pinctrl-names = "default"; + pinctrl-0 = <&musb_pins>; + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; + +&vaux1 { + /* Needed for ads7846 */ + regulator-name = "vcc"; +}; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; -- cgit v1.2.3 From 036582f76ad900e4c1b9ec290ce66c6f698bd00d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:17:09 -0800 Subject: ARM: OMAP2+: Add support for board specific auxdata quirks Looks like some boards need to fill in the auxdata before we call of_platform_populate(). Let's add support for auxdata quirks like we already have for pdata quirks for legacy drivers. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 39f020c982e8..468e4c1f2976 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -125,7 +125,18 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void)) pcs_pdata.rearm = rearm; } +/* + * Few boards still need auxdata populated before we populate + * the dev entries in of_platform_populate(). + */ +static struct pdata_init auxdata_quirks[] __initdata = { + { /* sentinel */ }, +}; + struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { +#ifdef CONFIG_MACH_NOKIA_N8X0 + OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL), +#endif #ifdef CONFIG_ARCH_OMAP3 OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata), @@ -137,6 +148,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { { /* sentinel */ }, }; +/* + * Few boards still need to initialize some legacy devices with + * platform data until the drivers support device tree. + */ static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, @@ -156,14 +171,8 @@ static struct pdata_init pdata_quirks[] __initdata = { { /* sentinel */ }, }; -void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) +static void pdata_quirks_check(struct pdata_init *quirks) { - struct pdata_init *quirks = pdata_quirks; - - omap_sdrc_init(NULL, NULL); - of_platform_populate(NULL, omap_dt_match_table, - omap_auxdata_lookup, NULL); - while (quirks->compatible) { if (of_machine_is_compatible(quirks->compatible)) { if (quirks->fn) @@ -173,3 +182,12 @@ void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) quirks++; } } + +void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table) +{ + omap_sdrc_init(NULL, NULL); + pdata_quirks_check(auxdata_quirks); + of_platform_populate(NULL, omap_dt_match_table, + omap_auxdata_lookup, NULL); + pdata_quirks_check(pdata_quirks); +} -- cgit v1.2.3 From c8f27e977310b3684ff9245a94aad55d0ee27c9f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:17:09 -0800 Subject: ARM: OMAP2+: Add device tree compatible revision checks for n8x0 This allows us to initialize the legacy devices when booted with device tree. Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-n8x0.c | 51 +++++++++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 827d15009a86..d61a00dba419 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -42,6 +42,38 @@ #define TUSB6010_GPIO_ENABLE 0 #define TUSB6010_DMACHAN 0x3f +#define NOKIA_N810_WIMAX (1 << 2) +#define NOKIA_N810 (1 << 1) +#define NOKIA_N800 (1 << 0) + +static u32 board_caps; + +#define board_is_n800() (board_caps & NOKIA_N800) +#define board_is_n810() (board_caps & NOKIA_N810) +#define board_is_n810_wimax() (board_caps & NOKIA_N810_WIMAX) + +static void board_check_revision(void) +{ + if (of_have_populated_dt()) { + if (of_machine_is_compatible("nokia,n800")) + board_caps = NOKIA_N800; + else if (of_machine_is_compatible("nokia,n810")) + board_caps = NOKIA_N810; + else if (of_machine_is_compatible("nokia,n810-wimax")) + board_caps = NOKIA_N810_WIMAX; + } else { + if (machine_is_nokia_n800()) + board_caps = NOKIA_N800; + else if (machine_is_nokia_n810()) + board_caps = NOKIA_N810; + else if (machine_is_nokia_n810_wimax()) + board_caps = NOKIA_N810_WIMAX; + } + + if (!board_caps) + pr_err("Unknown board\n"); +} + #if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) static struct i2c_cbus_platform_data n8x0_cbus_data = { .clk_gpio = 66, @@ -342,7 +374,7 @@ static void n810_set_power_emmc(struct device *dev, static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (machine_is_nokia_n800() || slot == 0) + if (board_is_n800() || slot == 0) return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd); n810_set_power_emmc(dev, power_on); @@ -388,7 +420,7 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) { int bit, *openp, index; - if (machine_is_nokia_n800()) { + if (board_is_n800()) { bit = 1 << 1; openp = &slot2_cover_open; index = 1; @@ -421,7 +453,7 @@ static int n8x0_mmc_late_init(struct device *dev) if (r < 0) return r; - if (machine_is_nokia_n800()) + if (board_is_n800()) vs2sel = 0; else vs2sel = 2; @@ -444,7 +476,7 @@ static int n8x0_mmc_late_init(struct device *dev) if (r < 0) return r; - if (machine_is_nokia_n800()) { + if (board_is_n800()) { bit = 1 << 1; openp = &slot2_cover_open; } else { @@ -471,7 +503,7 @@ static void n8x0_mmc_shutdown(struct device *dev) { int vs2sel; - if (machine_is_nokia_n800()) + if (board_is_n800()) vs2sel = 0; else vs2sel = 2; @@ -486,7 +518,7 @@ static void n8x0_mmc_cleanup(struct device *dev) gpio_free(N8X0_SLOT_SWITCH_GPIO); - if (machine_is_nokia_n810()) { + if (board_is_n810()) { gpio_free(N810_EMMC_VSD_GPIO); gpio_free(N810_EMMC_VIO_GPIO); } @@ -537,7 +569,7 @@ static void __init n8x0_mmc_init(void) { int err; - if (machine_is_nokia_n810()) { + if (board_is_n810()) { mmc1_data.slots[0].name = "external"; /* @@ -555,7 +587,7 @@ static void __init n8x0_mmc_init(void) if (err) return; - if (machine_is_nokia_n810()) { + if (board_is_n810()) { err = gpio_request_array(n810_emmc_gpios, ARRAY_SIZE(n810_emmc_gpios)); if (err) { @@ -700,6 +732,7 @@ static inline void board_serial_init(void) static void __init n8x0_init_machine(void) { + board_check_revision(); omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); /* FIXME: add n810 spi devices */ spi_register_board_info(n800_spi_board_info, @@ -707,7 +740,7 @@ static void __init n8x0_init_machine(void) omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, ARRAY_SIZE(n8x0_i2c_board_info_1)); omap_register_i2c_bus(2, 400, NULL, 0); - if (machine_is_nokia_n810()) + if (board_is_n810()) i2c_register_board_info(2, n810_i2c_board_info_2, ARRAY_SIZE(n810_i2c_board_info_2)); board_serial_init(); -- cgit v1.2.3 From 810ac2a1102880b6c66dc2f26979a896b2d84009 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:17:10 -0800 Subject: ARM: OMAP2+: Make n8x0 behave better with device tree based booting Initialize some devices using a late_initcall and test for the device tree based booting for some devices. This way we can keep things working for legacy platform devices when booted with device tree. Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-n8x0.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index d61a00dba419..c9eef2b9b86f 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -32,7 +32,7 @@ #include "common.h" #include "mmc.h" - +#include "soc.h" #include "mux.h" #include "gpmc-onenand.h" @@ -597,7 +597,8 @@ static void __init n8x0_mmc_init(void) } mmc_data[0] = &mmc1_data; - omap242x_init_mmc(mmc_data); + if (!of_have_populated_dt()) + omap242x_init_mmc(mmc_data); } #else @@ -730,6 +731,21 @@ static inline void board_serial_init(void) #endif +static int __init n8x0_late_initcall(void) +{ + if (!board_caps) + return -ENODEV; + + gpmc_onenand_init(board_onenand_data); + n8x0_mmc_init(); + n8x0_usb_init(); + if (!of_have_populated_dt()) + n8x0_cbus_init(); + + return 0; +} +omap_late_initcall(n8x0_late_initcall); + static void __init n8x0_init_machine(void) { board_check_revision(); @@ -743,12 +759,10 @@ static void __init n8x0_init_machine(void) if (board_is_n810()) i2c_register_board_info(2, n810_i2c_board_info_2, ARRAY_SIZE(n810_i2c_board_info_2)); - board_serial_init(); - omap_sdrc_init(NULL, NULL); - gpmc_onenand_init(board_onenand_data); - n8x0_mmc_init(); - n8x0_usb_init(); - n8x0_cbus_init(); + if (!of_have_populated_dt()) { + board_serial_init(); + omap_sdrc_init(NULL, NULL); + } } MACHINE_START(NOKIA_N800, "Nokia N800") -- cgit v1.2.3 From fa590c923401368d86db361350849a7bf9f42b8a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:17:10 -0800 Subject: ARM: OMAP2+: Add quirks support for n8x0 This allows us to keep things working when booted with device tree. Note that we still need to initialize most things with platform data as the drivers are lacking support for device tree. Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-n8x0.c | 23 +++++++++++++++++++++-- arch/arm/mach-omap2/common-board-devices.h | 1 + arch/arm/mach-omap2/pdata-quirks.c | 16 ++++++++++++++++ 3 files changed, 38 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index c9eef2b9b86f..99dd184f50f1 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -529,7 +529,7 @@ static void n8x0_mmc_cleanup(struct device *dev) * MMC controller2 is not in use. */ static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 2, + .nr_slots = 0, .switch_slot = n8x0_mmc_switch_slot, .init = n8x0_mmc_late_init, .cleanup = n8x0_mmc_cleanup, @@ -596,12 +596,13 @@ static void __init n8x0_mmc_init(void) } } + mmc1_data.nr_slots = 2; mmc_data[0] = &mmc1_data; if (!of_have_populated_dt()) omap242x_init_mmc(mmc_data); } #else - +static struct omap_mmc_platform_data mmc1_data; void __init n8x0_mmc_init(void) { } @@ -746,6 +747,24 @@ static int __init n8x0_late_initcall(void) } omap_late_initcall(n8x0_late_initcall); +/* + * Legacy init pdata init for n8x0. Note that we want to follow the + * I2C bus numbering starting at 0 for device tree like other omaps. + */ +void * __init n8x0_legacy_init(void) +{ + board_check_revision(); + spi_register_board_info(n800_spi_board_info, + ARRAY_SIZE(n800_spi_board_info)); + i2c_register_board_info(0, n8x0_i2c_board_info_1, + ARRAY_SIZE(n8x0_i2c_board_info_1)); + if (board_is_n810()) + i2c_register_board_info(1, n810_i2c_board_info_2, + ARRAY_SIZE(n810_i2c_board_info_2)); + + return &mmc1_data; +} + static void __init n8x0_init_machine(void) { board_check_revision(); diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 72bb41b3fd25..f338177e6900 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -10,5 +10,6 @@ struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); +void *n8x0_legacy_init(void); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 468e4c1f2976..6a7554515b6e 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -26,6 +26,8 @@ struct pdata_init { void (*fn)(void); }; +struct of_dev_auxdata omap_auxdata_lookup[]; + /* * Create alias for USB host PHY clock. * Remove this when clock phandle can be provided via DT @@ -68,6 +70,15 @@ static inline void legacy_init_wl12xx(unsigned ref_clock, } #endif +#ifdef CONFIG_MACH_NOKIA_N8X0 +static void __init omap2420_n8x0_legacy_init(void) +{ + omap_auxdata_lookup[0].platform_data = n8x0_legacy_init(); +} +#else +#define omap2420_n8x0_legacy_init NULL +#endif + #ifdef CONFIG_ARCH_OMAP3 static void __init hsmmc2_internal_input_clk(void) { @@ -130,6 +141,11 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void)) * the dev entries in of_platform_populate(). */ static struct pdata_init auxdata_quirks[] __initdata = { +#ifdef CONFIG_SOC_OMAP2420 + { "nokia,n800", omap2420_n8x0_legacy_init, }, + { "nokia,n810", omap2420_n8x0_legacy_init, }, + { "nokia,n810-wimax", omap2420_n8x0_legacy_init, }, +#endif { /* sentinel */ }, }; -- cgit v1.2.3 From 5a87cde490e1a1a5be5200012bf37a4b25b0f70e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:17:11 -0800 Subject: ARM: OMAP2+: Remove legacy booting support for n8x0 Now we can boot n8x with the appended device tree with: $ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make omap2420-n800.dtb $ cat arch/arm/boot/zImage arch/arm/boot/dts/omap2420-n800.dtb > /tmp/zImage Note that you need at least the following enabled: CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-n8x0.c | 158 --------------------------------------- arch/arm/mach-omap2/msdi.c | 69 ----------------- 2 files changed, 227 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 99dd184f50f1..d596571d7750 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -33,7 +32,6 @@ #include "common.h" #include "mmc.h" #include "soc.h" -#include "mux.h" #include "gpmc-onenand.h" #define TUSB6010_ASYNC_CS 1 @@ -61,58 +59,12 @@ static void board_check_revision(void) board_caps = NOKIA_N810; else if (of_machine_is_compatible("nokia,n810-wimax")) board_caps = NOKIA_N810_WIMAX; - } else { - if (machine_is_nokia_n800()) - board_caps = NOKIA_N800; - else if (machine_is_nokia_n810()) - board_caps = NOKIA_N810; - else if (machine_is_nokia_n810_wimax()) - board_caps = NOKIA_N810_WIMAX; } if (!board_caps) pr_err("Unknown board\n"); } -#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) -static struct i2c_cbus_platform_data n8x0_cbus_data = { - .clk_gpio = 66, - .dat_gpio = 65, - .sel_gpio = 64, -}; - -static struct platform_device n8x0_cbus_device = { - .name = "i2c-cbus-gpio", - .id = 3, - .dev = { - .platform_data = &n8x0_cbus_data, - }, -}; - -static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = { - { - I2C_BOARD_INFO("retu-mfd", 0x01), - }, -}; - -static void __init n8x0_cbus_init(void) -{ - const int retu_irq_gpio = 108; - - if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) - return; - irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); - n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio); - i2c_register_board_info(3, n8x0_i2c_board_info_3, - ARRAY_SIZE(n8x0_i2c_board_info_3)); - platform_device_register(&n8x0_cbus_device); -} -#else /* CONFIG_I2C_CBUS_GPIO */ -static void __init n8x0_cbus_init(void) -{ -} -#endif /* CONFIG_I2C_CBUS_GPIO */ - #if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and @@ -598,8 +550,6 @@ static void __init n8x0_mmc_init(void) mmc1_data.nr_slots = 2; mmc_data[0] = &mmc1_data; - if (!of_have_populated_dt()) - omap242x_init_mmc(mmc_data); } #else static struct omap_mmc_platform_data mmc1_data; @@ -684,54 +634,6 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { }, }; -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* I2S codec port pins for McBSP block */ - OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static struct omap_device_pad serial2_pads[] __initdata = { - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_MUX_MODE0, - .idle = OMAP_MUX_MODE3 /* Mux as GPIO for idle */ - }, -}; - -static inline void board_serial_init(void) -{ - struct omap_board_data bdata; - - bdata.flags = 0; - bdata.pads = NULL; - bdata.pads_cnt = 0; - - bdata.id = 0; - omap_serial_init_port(&bdata, NULL); - - bdata.id = 1; - omap_serial_init_port(&bdata, NULL); - - bdata.id = 2; - bdata.pads = serial2_pads; - bdata.pads_cnt = ARRAY_SIZE(serial2_pads); - omap_serial_init_port(&bdata, NULL); -} - -#else - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} - -#endif - static int __init n8x0_late_initcall(void) { if (!board_caps) @@ -740,8 +642,6 @@ static int __init n8x0_late_initcall(void) gpmc_onenand_init(board_onenand_data); n8x0_mmc_init(); n8x0_usb_init(); - if (!of_have_populated_dt()) - n8x0_cbus_init(); return 0; } @@ -764,61 +664,3 @@ void * __init n8x0_legacy_init(void) return &mmc1_data; } - -static void __init n8x0_init_machine(void) -{ - board_check_revision(); - omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); - /* FIXME: add n810 spi devices */ - spi_register_board_info(n800_spi_board_info, - ARRAY_SIZE(n800_spi_board_info)); - omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, - ARRAY_SIZE(n8x0_i2c_board_info_1)); - omap_register_i2c_bus(2, 400, NULL, 0); - if (board_is_n810()) - i2c_register_board_info(2, n810_i2c_board_info_2, - ARRAY_SIZE(n810_i2c_board_info_2)); - if (!of_have_populated_dt()) { - board_serial_init(); - omap_sdrc_init(NULL, NULL); - } -} - -MACHINE_START(NOKIA_N800, "Nokia N800") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = n8x0_init_machine, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END - -MACHINE_START(NOKIA_N810, "Nokia N810") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = n8x0_init_machine, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END - -MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = n8x0_init_machine, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index c52d8b4a3e91..828e0db3d943 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -88,72 +88,3 @@ int omap_msdi_reset(struct omap_hwmod *oh) return 0; } - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) - -static inline void omap242x_mmc_mux(struct omap_mmc_platform_data - *mmc_controller) -{ - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); - - omap_mux_init_signal("sdmmc_cmd", 0); - omap_mux_init_signal("sdmmc_clki", 0); - omap_mux_init_signal("sdmmc_clko", 0); - omap_mux_init_signal("sdmmc_dat0", 0); - omap_mux_init_signal("sdmmc_dat_dir0", 0); - omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { - omap_mux_init_signal("sdmmc_dat1", 0); - omap_mux_init_signal("sdmmc_dat2", 0); - omap_mux_init_signal("sdmmc_dat3", 0); - omap_mux_init_signal("sdmmc_dat_dir1", 0); - omap_mux_init_signal("sdmmc_dat_dir2", 0); - omap_mux_init_signal("sdmmc_dat_dir3", 0); - } - - /* - * Use internal loop-back in MMC/SDIO Module Input Clock - * selection - */ - if (mmc_controller->slots[0].internal_clock) { - u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } -} - -void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ - struct platform_device *pdev; - struct omap_hwmod *oh; - int id = 0; - char *oh_name = "msdi1"; - char *dev_name = "mmci-omap"; - - if (!mmc_data[0]) { - pr_err("%s fails: Incomplete platform data\n", __func__); - return; - } - - omap242x_mmc_mux(mmc_data[0]); - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return; - } - pdev = omap_device_build(dev_name, id, oh, mmc_data[0], - sizeof(struct omap_mmc_platform_data)); - if (IS_ERR(pdev)) - WARN(1, "Can'd build omap_device for %s:%s.\n", - dev_name, oh->name); -} - -#endif -- cgit v1.2.3 From 54ea18e8866af29d998718e32f7fdcd51db3a533 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Nov 2013 15:17:11 -0800 Subject: ARM: OMAP2+: Remove board file for H4 The old 2420 based H4 is probably not used at all as 2420 was Nokia specific SoC. I have one, but I'm not using it because of it's large size, and I doubt anybody else is using it either. We do have minimal omap2420-h4.dts in place, so if anybody wants more support on H4, patches are welcome. So let's just remove it as that helps us making mach-omap2 to be device tree only. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 7 - arch/arm/mach-omap2/Makefile | 1 - arch/arm/mach-omap2/board-h4.c | 365 ----------------------------------------- 3 files changed, 373 deletions(-) delete mode 100644 arch/arm/mach-omap2/board-h4.c (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dc21df166161..f2f71c20093f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -192,13 +192,6 @@ config MACH_OMAP2_TUSB6010 depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 -config MACH_OMAP_H4 - bool "OMAP 2420 H4 board" - depends on SOC_OMAP2420 - default y - select OMAP_DEBUG_DEVICES - select OMAP_PACKAGE_ZAF - config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on SOC_OMAP2430 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index adcef406ff0a..15bd1db73a26 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -237,7 +237,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o -obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c deleted file mode 100644 index f7808349a734..000000000000 --- a/arch/arm/mach-omap2/board-h4.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-h4.c - * - * Copyright (C) 2005 Nokia Corporation - * Author: Paul Mundt - * - * Modified from mach-omap/omap1/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include