From 5b7c57751e6dcf3a3063b8e94977972d4cb646c6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 12 Oct 2009 15:56:58 +0000 Subject: Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs Include the AD714x SPI/I2C resources based on what is possible. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 03fd835dec91..f911d2f403e7 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -515,7 +515,7 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = { }; #endif -#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) +#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) #include #include static struct bfin5xx_spi_chip ad7147_spi_chip_info = { @@ -523,7 +523,7 @@ static struct bfin5xx_spi_chip ad7147_spi_chip_info = { .bits_per_word = 16, }; -static struct ad714x_slider_plat slider_plat[] = { +static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { { .start_stage = 0, .end_stage = 7, @@ -531,7 +531,7 @@ static struct ad714x_slider_plat slider_plat[] = { }, }; -static struct ad714x_button_plat button_plat[] = { +static struct ad714x_button_plat ad7147_spi_button_plat[] = { { .keycode = BTN_FORWARD, .l_mask = 0, @@ -558,11 +558,11 @@ static struct ad714x_button_plat button_plat[] = { .h_mask = 0x400, }, }; -static struct ad714x_platform_data ad7147_platfrom_data = { +static struct ad714x_platform_data ad7147_spi_platform_data = { .slider_num = 1, .button_num = 5, - .slider = slider_plat, - .button = button_plat, + .slider = ad7147_spi_slider_plat, + .button = ad7147_spi_button_plat, .stage_cfg_reg = { {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600}, {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650}, @@ -581,10 +581,10 @@ static struct ad714x_platform_data ad7147_platfrom_data = { }; #endif -#if defined(CONFIG_INPUT_EVAL_AD7142EB) +#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) #include #include -static struct ad714x_button_plat button_plat[] = { +static struct ad714x_button_plat ad7142_i2c_button_plat[] = { { .keycode = BTN_1, .l_mask = 0, @@ -606,9 +606,9 @@ static struct ad714x_button_plat button_plat[] = { .h_mask = 0x8, }, }; -static struct ad714x_platform_data ad7142_platfrom_data = { +static struct ad714x_platform_data ad7142_i2c_platform_data = { .button_num = 4, - .button = button_plat, + .button = ad7142_i2c_button_plat, .stage_cfg_reg = { /* fixme: figure out right setting for all comoponent according * to hardware feature of EVAL-AD7142EB board */ @@ -861,7 +861,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) +#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) { .modalias = "ad714x_captouch", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -869,7 +869,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 5, .mode = SPI_MODE_3, - .platform_data = &ad7147_platfrom_data, + .platform_data = &ad7147_spi_platform_data, .controller_data = &ad7147_spi_chip_info, }, #endif @@ -1402,11 +1402,11 @@ static struct adp5588_gpio_platform_data adp5588_gpio_data = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_INPUT_EVAL_AD7142EB) +#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) { I2C_BOARD_INFO("ad7142_captouch", 0x2C), .irq = IRQ_PG5, - .platform_data = (void *)&ad7142_platfrom_data, + .platform_data = (void *)&ad7142_i2c_platform_data, }, #endif #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) -- cgit v1.2.3