From 2f8b5b21830aea95989a6e67d8a971297272a086 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 10 Jul 2018 14:47:25 -0500 Subject: ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores Call secure services to enable ACTLR[0] (Enable invalidates of BTB with ICIALLU) when branch hardening is enabled for kernel. On GP devices OMAP5/DRA7, there is no possibility to update secure side since "secure world" is ROM and there are no override mechanisms possible. On HS devices, appropriate PPA should do the workarounds as well. However, the configuration is only done for secondary core, since it is expected that firmware/bootloader will have enabled the required configuration for the primary boot core (note: bootloaders typically will NOT enable secondary processors, since it has no need to do so). Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-smp.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 69df3620eca5..1c73694c871a 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -109,6 +109,45 @@ void omap5_erratum_workaround_801819(void) static inline void omap5_erratum_workaround_801819(void) { } #endif +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR +/* + * Configure ACR and enable ACTLR[0] (Enable invalidates of BTB with + * ICIALLU) to activate the workaround for secondary Core. + * NOTE: it is assumed that the primary core's configuration is done + * by the boot loader (kernel will detect a misconfiguration and complain + * if this is not done). + * + * In General Purpose(GP) devices, ACR bit settings can only be done + * by ROM code in "secure world" using the smc call and there is no + * option to update the "firmware" on such devices. This also works for + * High security(HS) devices, as a backup option in case the + * "update" is not done in the "security firmware". + */ +static void omap5_secondary_harden_predictor(void) +{ + u32 acr, acr_mask; + + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + + /* + * ACTLR[0] (Enable invalidates of BTB with ICIALLU) + */ + acr_mask = BIT(0); + + /* Do we already have it done.. if yes, skip expensive smc */ + if ((acr & acr_mask) == acr_mask) + return; + + acr |= acr_mask; + omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr); + + pr_debug("%s: ARM ACR setup for CVE_2017_5715 applied on CPU%d\n", + __func__, smp_processor_id()); +} +#else +static inline void omap5_secondary_harden_predictor(void) { } +#endif + static void omap4_secondary_init(unsigned int cpu) { /* @@ -131,6 +170,8 @@ static void omap4_secondary_init(unsigned int cpu) set_cntfreq(); /* Configure ACR to disable streaming WA for 801819 */ omap5_erratum_workaround_801819(); + /* Enable ACR to allow for ICUALLU workaround */ + omap5_secondary_harden_predictor(); } /* -- cgit v1.2.3 From 923847413f7316b5ced3491769b3fefa6c56a79a Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 11 Jul 2018 12:54:54 -0500 Subject: ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller The AM3517 has a different OTG controller location than the OMAP3, which is included from omap3.dtsi. This results in a hwmod error. Since the AM3517 has a different OTG controller address, this patch disabes one that is isn't available. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3517.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 4b6062b631b1..23ea381d363f 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -91,6 +91,11 @@ }; }; +/* Table Table 5-79 of the TRM shows 480ab000 is reserved */ +&usb_otg_hs { + status = "disabled"; +}; + &iva { status = "disabled"; }; -- cgit v1.2.3