From c7d1f08a0c91ad9796d6d1fac8eb913e8a6d4288 Mon Sep 17 00:00:00 2001 From: Ryo Kataoka Date: Sun, 5 Apr 2015 01:54:31 +0900 Subject: ARM: shmobile: r8a7790: Remove MSIOF address from device tree MSIOF Base Address H'E6xx can be accessed by CPU and DMAC. MSIOF Base Address H'E7xx for DMAC was removed from H/W manual. Signed-off-by: Ryo Kataoka Signed-off-by: Yoshihiro Kaneko Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4bb2f4c17321..f3b8430070b6 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1273,7 +1273,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; @@ -1285,7 +1285,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; @@ -1297,7 +1297,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; @@ -1309,7 +1309,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>; + reg = <0 0xe6c90000 0 0x0064>; interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; -- cgit v1.2.3 From cb6d08a2b61fc0025a0148d06b71b8a7d0920e98 Mon Sep 17 00:00:00 2001 From: Ryo Kataoka Date: Sun, 5 Apr 2015 01:55:12 +0900 Subject: ARM: shmobile: r8a7791: Remove MSIOF address from device tree MSIOF Base Address H'E6xx can be accessed by CPU and DMAC. MSIOF Base Address H'E7xx for DMAC was removed from H/W manual. Signed-off-by: Ryo Kataoka Signed-off-by: Yoshihiro Kaneko Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- Documentation/devicetree/bindings/spi/sh-msiof.txt | 2 +- arch/arm/boot/dts/r8a7791.dtsi | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 4c388bb2f0a2..8f771441be60 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -60,7 +60,7 @@ Example: msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 4696062f6dde..3e9f824797e7 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1288,7 +1288,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; @@ -1300,7 +1300,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; @@ -1312,7 +1312,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; -- cgit v1.2.3 From 7917d14129a5a7241289f06d2c5299c5d03ed529 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 18 Mar 2015 11:24:01 +0800 Subject: ARM: sun8i: Add SMP support for the Allwinner A23 The A23 is a dual Cortex-A7. Add the logic to use the IPs used to control the CPU configuration and the CPU power so that we can bring up secondary CPUs at boot. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/arm/cpus.txt | 1 + arch/arm/mach-sunxi/platsmp.c | 69 ++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 6aa331d11c5e..d6b794cef0b8 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -188,6 +188,7 @@ nodes to be present and contain the properties described below. # On ARM 32-bit systems this property is optional and can be one of: "allwinner,sun6i-a31" + "allwinner,sun8i-a23" "arm,psci" "brcm,brahma-b15" "marvell,armada-375-smp" diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 587b0468efcc..e8483ec79d67 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -121,3 +121,72 @@ static struct smp_operations sun6i_smp_ops __initdata = { .smp_boot_secondary = sun6i_smp_boot_secondary, }; CPU_METHOD_OF_DECLARE(sun6i_a31_smp, "allwinner,sun6i-a31", &sun6i_smp_ops); + +static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "allwinner,sun8i-a23-prcm"); + if (!node) { + pr_err("Missing A23 PRCM node in the device tree\n"); + return; + } + + prcm_membase = of_iomap(node, 0); + if (!prcm_membase) { + pr_err("Couldn't map A23 PRCM registers\n"); + return; + } + + node = of_find_compatible_node(NULL, NULL, + "allwinner,sun8i-a23-cpuconfig"); + if (!node) { + pr_err("Missing A23 CPU config node in the device tree\n"); + return; + } + + cpucfg_membase = of_iomap(node, 0); + if (!cpucfg_membase) + pr_err("Couldn't map A23 CPU config registers\n"); + +} + +static int sun8i_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + u32 reg; + + if (!(prcm_membase && cpucfg_membase)) + return -EFAULT; + + spin_lock(&cpu_lock); + + /* Set CPU boot address */ + writel(virt_to_phys(secondary_startup), + cpucfg_membase + CPUCFG_PRIVATE0_REG); + + /* Assert the CPU core in reset */ + writel(0, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu)); + + /* Assert the L1 cache in reset */ + reg = readl(cpucfg_membase + CPUCFG_GEN_CTRL_REG); + writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_GEN_CTRL_REG); + + /* Clear CPU power-off gating */ + reg = readl(prcm_membase + PRCM_CPU_PWROFF_REG); + writel(reg & ~BIT(cpu), prcm_membase + PRCM_CPU_PWROFF_REG); + mdelay(1); + + /* Deassert the CPU core reset */ + writel(3, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu)); + + spin_unlock(&cpu_lock); + + return 0; +} + +struct smp_operations sun8i_smp_ops __initdata = { + .smp_prepare_cpus = sun8i_smp_prepare_cpus, + .smp_boot_secondary = sun8i_smp_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(sun8i_a23_smp, "allwinner,sun8i-a23", &sun8i_smp_ops); -- cgit v1.2.3 From 033ba3d759db1ae913ad87f59554958a1fbc6fcd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: Relicense the A10 DTSI under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our DTSI first under a GPL/X11 dual-license. Hopefully, the DTS will follow soon. Signed-off-by: Maxime Ripard Acked-by: Alexandre Belloni Acked-by: Arnd Bergmann Acked-by: Carlo Caione Acked-by: Chen-Yu Tsai Acked-by: David Lanzendörfer Acked-by: Emilio López Acked-by: Hans de Goede Acked-by: Lorenzo Pieralisi Acked-by: Oliver Schinagl Acked-by: Roman Byshko Acked-by: Stefan Roese --- arch/arm/boot/dts/sun4i-a10.dtsi | 46 +++++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index eebb7853e00b..17e4598db176 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -2,12 +2,48 @@ * Copyright 2012 Stefan Roese * Stefan Roese * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" -- cgit v1.2.3 From 1d86b4b52c94867529f4c61d950f77298ddeb85e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: Relicense the A10s/A13 DTSI under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our DTSI first under a GPL/X11 dual-license. Hopefully, the DTS will follow soon. Signed-off-by: Maxime Ripard Acked-by: Arnd Bergmann Acked-by: Chen-Yu Tsai Acked-by: David Lanzendörfer Acked-by: Emilio López Acked-by: Hans de Goede Acked-by: Lorenzo Pieralisi Acked-by: Oliver Schinagl Acked-by: Roman Byshko --- arch/arm/boot/dts/sun5i-a10s.dtsi | 46 ++++++++++++++++++++++++++++++++++----- arch/arm/boot/dts/sun5i-a13.dtsi | 46 ++++++++++++++++++++++++++++++++++----- 2 files changed, 82 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 2fd8988f310c..3733fc1ed4c7 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 883cb4873688..efea2f48e098 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" -- cgit v1.2.3 From 17a35943458cf9463cd53e88ba3b68d75eb152b1 Mon Sep 17 00:00:00 2001 From: Priit Laes Date: Mon, 26 Jan 2015 20:00:06 +0200 Subject: ARM: dts: sun4i: Add initial dts for Gemei G9 tablet Gemei G9 is an A10 based tablet, with 1G RAM, 16G NAND, 1024x768 IPS LCD display, stereo speakers, 1.3MP front camera and 5 MP rear camera, 8000mAh battery, GT901 2+1 touchscreen, Bosch BMA250 accelerometer and RTL8188CUS USB wifi. It also has MicroSD slot, miniHDMI, 1 x MicroUSB OTG port and 1 x MicroUSB host port and 3.5mm headphone jack. Changes since v2: * Fix syntax error (brown paper bag release) Changes since v1: * Added sun4i-lradc keymap * Added TODO note about missing IRQ pins for bma250 * Fixed formatting issues and removed external URLs Signed-off-by: Priit Laes Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 7 +- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 168 +++++++++++++++++++++++++++++++ 2 files changed, 172 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/sun4i-a10-gemei-g9.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 86217db2937a..b3b29104d59e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -525,13 +525,14 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-ba10-tvbox.dtb \ sun4i-a10-chuwi-v7-cw0825.dtb \ sun4i-a10-cubieboard.dtb \ + sun4i-a10-gemei-g9.dtb \ + sun4i-a10-hackberry.dtb \ + sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet97fv2.dtb \ sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-mk802.dtb \ sun4i-a10-mk802ii.dtb \ - sun4i-a10-hackberry.dtb \ - sun4i-a10-hyundai-a7hd.dtb \ - sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb dtb-$(CONFIG_MACH_SUN5I) += \ diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts new file mode 100644 index 000000000000..0c7345380793 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -0,0 +1,168 @@ +/* + * Copyright 2015 Priit Laes + * + * Priit Laes + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include + +/ { + model = "Gemei G9 Tablet"; + compatible = "gemei,g9", "allwinner,sun4i-a10"; +}; + +/* + * TODO: + * 2x cameras via CSI + * bma250 IRQs + * AXP battery management + * NAND + * OTG + * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48 + */ + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + + /* + * TODO: interrupt pins: + * int1 - PH00 + * int2 - PI10 + */ + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + + status = "okay"; + + button@158 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <349206>; + }; + + button@1142 { + label = "Esc"; + linux,code = ; + channel = <0>; + voltage = <1142856>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ + cd-inverted; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 061035d456c9902d31a3b7d98b8a7ee0f3b20a99 Mon Sep 17 00:00:00 2001 From: Adam Sampson Date: Tue, 27 Jan 2015 18:27:45 +0000 Subject: ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board Add support for the LinkSprite pcDuino 3 Nano board. This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano Changes in v3: - rename LEDs to pcduino3-nano:green:usr[12] - remove optional features on Arduino headers (i2c2, spi0, uart2) Signed-off-by: Adam Sampson Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 191 ++++++++++++++++++++++++++ 2 files changed, 193 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b3b29104d59e..8c9c62ba6599 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -559,7 +559,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ - sun7i-a20-pcduino3.dtb + sun7i-a20-pcduino3.dtb \ + sun7i-a20-pcduino3-nano.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts new file mode 100644 index 000000000000..632b8a9e092f --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -0,0 +1,191 @@ +/* + * Copyright 2015 Adam Sampson + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include + +/ { + model = "LinkSprite pcDuino3 Nano"; + compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3_nano>; + + /* Marked "LED3" on the PCB. */ + usr1 { + label = "pcduino3-nano:green:usr1"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */ + }; + + /* Marked "LED4" on the PCB. */ + usr2 { + label = "pcduino3-nano:green:usr2"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_pcduino3_nano: led_pins@0 { + allwinner,pins = "PH16", "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + status = "okay"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; + gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From d67b984be92927c1bbab3e391616e51937e26438 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: hummingbird: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Wills Wang --- arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 46 +++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 86a944ce19f8..2a9ee72b2b4a 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -3,12 +3,48 @@ * * Wills Wang * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From bc8ffc2de87855f91b376dca4597ca0b9254cabc Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 28 Jan 2015 03:54:08 +0800 Subject: ARM: dts: sun9i: Add usb clock nodes to a80 dtsi The USB controller and phy clocks and resets have a separate address block and driver. Add the nodes to represent them. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index f0f6fb91f8c3..0ffecf6f91a9 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -137,6 +137,28 @@ clock-output-names = "osc32k"; }; + usb_mod_clk: clk@00a08000 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-mod-clk"; + reg = <0x00a08000 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb0_ahb", "usb_ohci0", + "usb1_ahb", "usb_ohci1", + "usb2_ahb", "usb_ohci2"; + }; + + usb_phy_clk: clk@00a08004 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-phy-clk"; + reg = <0x00a08004 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb_phy0", "usb_hsic1_480M", + "usb_phy1", "usb_hsic2_480M", + "usb_phy2", "usb_hsic_12M"; + }; + pll4: clk@0600000c { #clock-cells = <0>; compatible = "allwinner,sun9i-a80-pll4-clk"; -- cgit v1.2.3 From 1af5d19269c122b7882b26132d2cad05b455e3c7 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 28 Jan 2015 03:54:10 +0800 Subject: ARM: dts: sun9i: Add usb phy nodes to a80 dtsi On sun9i, there are 3 independent usb phys for EHCI/OHCI. Add device nodes for them. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 0ffecf6f91a9..7e7a369737b0 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -345,6 +345,43 @@ */ ranges = <0 0 0 0x20000000>; + usbphy1: phy@00a00800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a00800 0x4>; + clocks = <&usb_phy_clk 1>; + clock-names = "phy"; + resets = <&usb_phy_clk 17>; + reset-names = "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + + usbphy2: phy@00a01800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a01800 0x4>; + clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, + <&usb_phy_clk 3>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + /* usb1 is always used with HSIC */ + phy_type = "hsic"; + }; + + usbphy3: phy@00a02800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a02800 0x4>; + clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, + <&usb_phy_clk 5>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; -- cgit v1.2.3 From c0188c40c2eac2bfc1305240120e568985f17c52 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: olinuxino micro: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Chen-Yu Tsai Acked-by: Hans de Goede Acked-by: Zalan Blenessy --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 46 ++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 714e15ac5416..5c548cfda0e4 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 70472163a7471e1ae37cbdebe2c7bfffc45ebd1f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 3 Feb 2015 06:22:02 +0800 Subject: ARM: dts: sun9i: Add USB host controller nodes to a80 dtsi The A80 has 3 EHCI/OHCI USB controllers. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 7e7a369737b0..2f7f82cc86ba 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -345,6 +345,28 @@ */ ranges = <0 0 0 0x20000000>; + ehci0: usb@00a00000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a00000 0x100>; + interrupts = ; + clocks = <&usb_mod_clk 1>; + resets = <&usb_mod_clk 17>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@00a00400 { + compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; + reg = <0x00a00400 0x100>; + interrupts = ; + clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>; + resets = <&usb_mod_clk 17>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy1: phy@00a00800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a00800 0x4>; @@ -356,6 +378,17 @@ #phy-cells = <0>; }; + ehci1: usb@00a01000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a01000 0x100>; + interrupts = ; + clocks = <&usb_mod_clk 3>; + resets = <&usb_mod_clk 18>; + phys = <&usbphy2>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy2: phy@00a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; @@ -370,6 +403,28 @@ phy_type = "hsic"; }; + ehci2: usb@00a02000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a02000 0x100>; + interrupts = ; + clocks = <&usb_mod_clk 5>; + resets = <&usb_mod_clk 19>; + phys = <&usbphy3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@00a02400 { + compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; + reg = <0x00a02400 0x100>; + interrupts = ; + clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>; + resets = <&usb_mod_clk 19>; + phys = <&usbphy3>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy3: phy@00a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; -- cgit v1.2.3 From fa86885b6bc75e73d2f24ada02ccb74cab9c73c1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 3 Feb 2015 06:22:03 +0800 Subject: ARM: dts: sun9i: Enable USB support on A80 Optimus board On the Optimus board, all three USB hosts can be used. HCI0 and HCI2 are available through the USB connector. HCI1 is available with HSIC through 2 pins on the GPIO expansion header. This patch also adds a regulator for HCI2/USB3's VBUS. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 65 +++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index a3fed2bdf620..e53f2656c2d0 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -86,6 +86,29 @@ gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; }; }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_pin_optimus>; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; }; &i2c3 { @@ -99,6 +122,14 @@ allwinner,pull = ; }; +&ohci0 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + &pio { led_pins_optimus: led-pins@0 { allwinner,pins = "PH0", "PH1"; @@ -113,6 +144,20 @@ allwinner,drive = ; allwinner,pull = ; }; + + usb1_vbus_pin_optimus: usb1_vbus_pin@1 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb3_vbus_pin_optimus: usb3_vbus_pin@1 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; }; &mmc0 { @@ -134,6 +179,12 @@ status = "okay"; }; +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_optimus>; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -150,3 +201,17 @@ /* Enable internal pull-up */ allwinner,pull = ; }; + +&usbphy1 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usbphy3 { + vbus-supply = <®_usb3_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From fbfa7367724339334f8076f6bf03697060f4e9f3 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 30 Jan 2015 16:30:48 +0100 Subject: ARM: sun5i: Add a DTSI common to A10s and A13 The A10s and the A13 are very similar SoCs, the only difference being the number of pins and the number of devices available (number of UARTs, EMAC only in the A10s, etc.), and the clocks and pinctrl functions obviously. Create a common DTSI that will be included by the A10s and A13 DTSI, that will add their SoC differences in there. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 532 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 532 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi new file mode 100644 index 000000000000..24c29c27fc6d --- /dev/null +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -0,0 +1,532 @@ +/* + * Copyright 2012-2015 Maxime Ripard + * + * Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include +#include + +/ { + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + clocks = <&cpu>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll5: clk@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + clock-output-names = "cpu"; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + clock-output-names = "ahb"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + + apb1: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1"; + }; + + axi_gates: clk@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_phy"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ahb_gates 20>, <&spi0_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <32>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <33>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <34>; + status = "disabled"; + }; + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-phy"; + reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; + status = "disabled"; + }; + + ehci0: usb@01c14000 { + reg = <0x01c14000 0x100>; + interrupts = <39>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c14400 { + reg = <0x01c14400 0x100>; + interrupts = <40>; + clocks = <&usb_clk 6>, <&ahb_gates 2>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <12>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-a10-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #gpio-cells = <3>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; + }; + + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-a10-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + #thermal-sensor-cells = <0>; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + timer@01c60000 { + compatible = "allwinner,sun5i-a13-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <82>, <83>; + clocks = <&ahb_gates 28>; + }; + }; +}; -- cgit v1.2.3 From 51fbba421261f13f215848c49ec8e3a169e0f1a2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 30 Jan 2015 16:31:19 +0100 Subject: ARM: sun5i: a13: Move to the common sun5i DTSI Now that we have a common DTSI for the sun5i family, move the A13 to use it. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13.dtsi | 552 +++------------------------------------ arch/arm/boot/dts/sun5i.dtsi | 28 ++ 2 files changed, 65 insertions(+), 515 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index efea2f48e098..39264f7c7ae6 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -49,10 +49,10 @@ #include "skeleton.dtsi" -#include +#include "sun5i.dtsi" -#include #include +#include / { interrupt-parent = <&intc>; @@ -71,31 +71,6 @@ }; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - clocks = <&cpu>; - clock-latency = <244144>; /* 8 32k periods */ - operating-points = < - /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1200000 - 576000 1200000 - 432000 1200000 - >; - #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <5>; - }; - }; - thermal-zones { cpu_thermal { /* milliseconds */ @@ -128,107 +103,7 @@ }; }; - memory { - reg = <0x40000000 0x20000000>; - }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - ahb_gates: clk@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun5i-a13-ahb-gates-clk"; @@ -242,14 +117,6 @@ "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - apb0_gates: clk@01c20068 { #clock-cells = <1>; compatible = "allwinner,sun5i-a13-apb0-gates-clk"; @@ -258,14 +125,6 @@ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - apb1_gates: clk@01c2006c { #clock-cells = <1>; compatible = "allwinner,sun5i-a13-apb1-gates-clk"; @@ -274,384 +133,47 @@ clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; +}; - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun5i-a13-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; +&cpu0 { + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1400000 + 912000 1350000 + 864000 1300000 + 624000 1200000 + 576000 1200000 + 432000 1200000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <5>; +}; - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; - status = "disabled"; - }; +&ehci0 { + compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; +}; - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; +&ohci0 { + compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; +}; - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; +&pio { + compatible = "allwinner,sun5i-a13-pinctrl"; - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; + uart1_pins_a: uart1@0 { + allwinner,pins = "PE10", "PE11"; + allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; + }; - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; + uart1_pins_b: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 24c29c27fc6d..e42cbb03620f 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -439,6 +439,34 @@ #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = ; + allwinner,pull = ; + }; }; timer@01c20c00 { -- cgit v1.2.3 From 903b2d75159fe1d5eca7e7e911c824268fe6c9f1 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 30 Jan 2015 16:42:13 +0100 Subject: ARM: sun5i: a10s: Move to the common sun5i DTSI Now that we have a common DTSI for the sun5i family, move the A10s to use it. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s.dtsi | 582 ++++---------------------------------- 1 file changed, 48 insertions(+), 534 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 3733fc1ed4c7..ef516db5852d 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -49,6 +49,8 @@ #include "skeleton.dtsi" +#include "sun5i.dtsi" + #include #include @@ -81,113 +83,7 @@ }; }; - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; - }; - - memory { - reg = <0x40000000 0x20000000>; - }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - ahb_gates: clk@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; @@ -202,14 +98,6 @@ "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - apb0_gates: clk@01c20068 { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; @@ -219,14 +107,6 @@ "apb0_ir", "apb0_keypad"; }; - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - apb1_gates: clk@01c2006c { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; @@ -236,161 +116,9 @@ "apb1_i2c2", "apb1_uart0", "apb1_uart1", "apb1_uart2", "apb1_uart3"; }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; @@ -407,214 +135,6 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <33>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun5i-a10s-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart0_pins_a: uart0@0 { - allwinner,pins = "PB19", "PB20"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart2_pins_a: uart2@0 { - allwinner,pins = "PC18", "PC19"; - allwinner,function = "uart2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; - }; - - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; - allwinner,function = "mmc1"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -625,16 +145,6 @@ status = "disabled"; }; - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; - uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; @@ -644,52 +154,56 @@ clocks = <&apb1_gates 18>; status = "disabled"; }; + }; +}; - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; - status = "disabled"; - }; +&ehci0 { + compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci"; +}; - i2c0: i2c@01c2ac00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - }; +&ohci0 { + compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci"; +}; - i2c1: i2c@01c2b000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - }; +&pio { + compatible = "allwinner,sun5i-a10s-pinctrl"; - i2c2: i2c@01c2b400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - }; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB19", "PB20"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; + uart2_pins_a: uart2@0 { + allwinner,pins = "PC18", "PC19"; + allwinner,function = "uart2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = ; + allwinner,pull = ; + }; + + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; + allwinner,function = "mmc1"; + allwinner,drive = ; + allwinner,pull = ; }; }; -- cgit v1.2.3 From 84bdea6e5ed64211be4f8f1773186f1f5c9401f3 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: a1000: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 200 +++++++++++++++++----------------- 1 file changed, 99 insertions(+), 101 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index b67e5be618cf..648626bc58a1 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -58,103 +58,6 @@ model = "Mele A1000"; compatible = "mele,a1000", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_a1000: led_pins@0 { - allwinner,pins = "PH10", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -181,12 +84,107 @@ enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&pio { + emac_power_pin_a1000: emac_power_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + led_pins_a1000: led_pins@0 { + allwinner,pins = "PH10", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From b6ef4c2c66c3afa621722f31fd2542393051a894 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: ba10 tvbox: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 168 ++++++++++++++--------------- 1 file changed, 83 insertions(+), 85 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 490b77c9bb36..bebb803a9456 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -54,95 +54,93 @@ / { model = "BA10 tvbox"; compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; - reg_usb2_vbus: usb2-vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 8fd5cfc7e4d62c1378c7afecdf2176b44502236a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: cubieboard: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 214 ++++++++++++++--------------- 1 file changed, 106 insertions(+), 108 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 4260c2b47607..07c2f64b14ee 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -57,104 +57,6 @@ model = "Cubietech Cubieboard"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - spi0: spi@01c05000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -171,26 +73,96 @@ linux,default-trigger = "heartbeat"; }; }; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; }; -#include "axp209.dtsi" +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; -&cpu0 { - cpu-supply = <®_dcdc2>; +&ohci0 { + status = "okay"; }; +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_cubieboard: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -215,3 +187,29 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 4218f450e8dd5d309ad153079dcbb57eb7465622 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: hackberry: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 187 ++++++++++++++---------------- 1 file changed, 85 insertions(+), 102 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index d3f73ea25567..3cb067ed8715 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -58,102 +58,6 @@ model = "Miniand Hackberry"; compatible = "miniand,hackberry", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy0>; - status = "okay"; - }; - - mdio@01c0b080 { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - pinctrl-names = "default"; - pinctrl-0 = <&hackberry_hogs>; - - hackberry_hogs: hogs@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; - reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; regulator-name = "emac-3v3"; @@ -162,14 +66,93 @@ enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy0>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&hackberry_hogs>; + + hackberry_hogs: hogs@0 { + allwinner,pins = "PH19"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb2_vbus: usb2-vbus { - pinctrl-0 = <&usb2_vbus_pin_hackberry>; - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_hackberry>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; -- cgit v1.2.3 From 82c8364b66f9f7e5f2e70d5ad15beff63973786f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: inet97fv2: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 104 ++++++++++++++---------------- 1 file changed, 49 insertions(+), 55 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 482914333bba..ab3bbc13db1c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -56,71 +56,65 @@ / { model = "INet-97F Rev 02"; compatible = "primux,inet97fv2", "allwinner,sun4i-a10"; +}; - aliases { - serial0 = &uart0; - }; - - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - ehci0: usb@01c14000 { - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - ohci0: usb@01c14400 { - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&ohci1 { + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +®_usb1_vbus { + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; +®_usb2_vbus { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- cgit v1.2.3 From c2e046419f47d10fcd1c427fc45ce6a19c7119ae Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: mini xplus: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 140 ++++++++++++++--------------- 1 file changed, 68 insertions(+), 72 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index eb5fd6904a69..dce9a341516b 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -57,80 +57,76 @@ / { model = "PineRiver Mini X-Plus"; compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - ir0_pins_a: ir0@0 { - /* The ir receiver is not always populated */ - allwinner,pull = ; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; +&ehci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; }; }; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&ir0_pins_a { + /* The ir receiver is not always populated */ + allwinner,pull = ; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From a86d26c85a414d4ec69ff1b1fb66b14d5c3046bd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: olinuxino lime: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 213 ++++++++++++------------- 1 file changed, 104 insertions(+), 109 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 75742f8f96f3..03350dff42b1 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -56,136 +56,131 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; - cpus { - cpu0: cpu@0 { - /* - * The A10-Lime is known to be unstable - * when running at 1008 MHz - */ - operating-points = < - /* kHz uV */ - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; - cooling-max-level = <2>; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a10-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; +}; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - mdio@01c0b080 { - status = "okay"; +&cpu0 { + /* + * The A10-Lime is known to be unstable when running at 1008 MHz + */ + operating-points = < + /* kHz uV */ + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + cooling-max-level = <2>; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&ehci0 { + status = "okay"; +}; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - ohci0: usb@01c14400 { - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&mdio { + status = "okay"; - ohci1: usb@01c1c400 { - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&ohci1 { + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - green { - label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +®_usb1_vbus { + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +®_usb2_vbus { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- cgit v1.2.3 From 5e8773694937784003216bd147d5dd969e2cd091 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun4i: pcduino: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 177 ++++++++++++++++---------------- 1 file changed, 88 insertions(+), 89 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 9d1e5482cf82..6923ca75eb4a 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -58,91 +58,6 @@ model = "LinkSprite pcDuino"; compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_pcduino: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - key_pins_pcduino: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; leds { compatible = "gpio-leds"; @@ -185,12 +100,96 @@ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; }; }; +}; + +&ehci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_pcduino: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + key_pins_pcduino: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From b96b3b224e872ba33e404fe8770e1ae34a1b58be Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 30 Jan 2015 16:51:03 +0100 Subject: ARM: sun5i: a10s: olinuxino micro: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 315 +++++++++++------------ 1 file changed, 157 insertions(+), 158 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 2bbc93b935ca..aa88ee887381 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -65,184 +65,183 @@ serial2 = &uart3; }; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; + + green { + label = "a10s-olinuxino-micro:green:usr"; + gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - mdio@01c0b080 { - status = "okay"; +&ehci0 { + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; - mmc1: mmc@01c10000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ - cd-inverted; - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; + at24@50 { + compatible = "at,24c16"; + pagesize = <16>; + reg = <0x50>; + read-only; + }; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; + button@191 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <191274>; + }; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = ; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = ; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <987387>; - }; - }; + button@392 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <392644>; + }; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + button@601 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <601151>; + }; - uart2: serial@01c28800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; - status = "okay"; - }; + button@795 { + label = "Enter"; + linux,code = ; + channel = <0>; + voltage = <795090>; + }; - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; - status = "okay"; - }; + button@987 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <987387>; + }; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; +&mdio { + status = "okay"; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - at24@50 { - compatible = "at,24c16"; - pagesize = <16>; - reg = <0x50>; - read-only; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; + mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; - green { - label = "a10s-olinuxino-micro:green:usr"; - gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PE3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; - gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + -- cgit v1.2.3 From 420e6f25df16322fecaa4de7d20ae6fa3a7363a2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 30 Jan 2015 16:58:45 +0100 Subject: ARM: sun5i: a10s: r7 tv dongle: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts | 132 +++++++++++++------------- 1 file changed, 65 insertions(+), 67 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 7deddfc9df8b..d42ce170e640 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -56,69 +56,6 @@ model = "R7 A10s hdmi tv-stick"; compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; - status = "okay"; - }; - - mmc1: mmc@01c10000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_r7: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_r7: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_r7: usb1_vbus_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -130,10 +67,71 @@ default-state = "on"; }; }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_r7: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_r7: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_r7>; - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_r7: usb1_vbus_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_r7>; + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From f5d89ab5ba954b5ddcfc99c737da4f92b76b2da9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 11:59:48 +0100 Subject: ARM: sun5i: a13: hsg h702: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 136 +++++++++++++++---------------- 1 file changed, 67 insertions(+), 69 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 03aa04555630..b59255a445bc 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -59,82 +59,69 @@ aliases { serial0 = &uart1; }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_ldo3>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_h702: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; }; }; -#include "axp209.dtsi" +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; -&cpu0 { - cpu-supply = <®_dcdc2>; + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -165,3 +152,14 @@ regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; -- cgit v1.2.3 From c999303bfc26644b0ab66b3f905ff46b4c76a82d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:04:17 +0100 Subject: ARM: sun5i: a13: olinuxino micro: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 148 ++++++++++++------------ 1 file changed, 73 insertions(+), 75 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 03deb84268ce..bdb0a094223f 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -61,93 +61,91 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinom>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; + power { + label = "a13-olinuxino-micro:green:power"; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&pio { + mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinom>; - - power { - label = "a13-olinuxino-micro:green:power"; - gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + led_pins_olinuxinom: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From b2547166a69a2878d4e152a5b2143507db8bd381 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun5i: a13: olinuxino: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 236 +++++++++++++++--------------- 1 file changed, 117 insertions(+), 119 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 6b24876ed462..d09c57b4905b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -63,141 +63,139 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; + power { + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = ; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = ; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <987387>; - }; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + button@191 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <191274>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <392644>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@601 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <601151>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; + button@795 { + label = "Enter"; + linux,code = ; + channel = <0>; + voltage = <795090>; + }; - power { - gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + button@987 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <987387>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxino>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From df839aeb8042e5041dd4bba8acc5e8332cb3e5bc Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun6i: app4 evb1: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 52 +++++++++++++++---------------- 1 file changed, 25 insertions(+), 27 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index be9f5ee6b59e..98a74da02fd7 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -61,36 +61,34 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; +}; - soc@01c00000 { - pio: pinctrl@01c20800 { - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH27"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&ehci0 { + status = "okay"; +}; - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; +&pio { + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH27"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; - ehci0: usb@01c1a000 { - status = "okay"; - }; +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; }; -- cgit v1.2.3 From 6f1b57f57d4dfc8033763c02d4e17131d1aa08ab Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun6i: colombus: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 120 +++++++++++++++---------------- 1 file changed, 59 insertions(+), 61 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 84630e56acd7..d6e925c381a3 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -61,76 +61,74 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - usbphy: phy@01c19400 { - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "fail"; +}; - ehci1: usb@01c1b000 { - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - pio: pinctrl@01c20800 { - mmc0_pins_a: mmc0@0 { - allwinner,pull = ; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; - usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&mmc0_pins_a { + allwinner,pull = ; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&pio { + mmc0_cd_pin_colombus: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "fail"; - }; + usb2_vbus_pin_colombus: usb2_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; +®_usb2_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_colombus>; + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_colombus>; - gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- cgit v1.2.3 From ece44e41fad62a4e4964540aa31cebb4b89a0b43 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun6i: m9: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-m9.dts | 148 ++++++++++++++++++------------------- 1 file changed, 73 insertions(+), 75 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 139a21e6b695..5cbbbd696b00 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -60,93 +60,91 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; + }; +}; - ehci0: usb@01c1a000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1b000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - pio: pinctrl@01c20800 { - led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - gmac: ethernet@01c30000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; - ir@01f02000 { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; - }; +&pio { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; - - blue { - label = "m9:blue:usr"; - gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; - }; + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; - gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From d540b7cc69ace442959c5754d62b755d63603697 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: bananapi: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 262 +++++++++++++++---------------- 1 file changed, 130 insertions(+), 132 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 5dd139e7792e..6d1faf069e7e 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -65,160 +65,158 @@ serial2 = &uart7; }; - soc@01c00000 { - spi0: spi@01c05000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - status = "okay"; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapi>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; + green { + label = "bananapi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ahci { + status = "okay"; +}; - ahci: sata@01c18000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart7: serial@01c29c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&ohci0 { + status = "okay"; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&pio { + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapi>; - - green { - label = "bananapi:green:usr"; - gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; - }; + gmac_power_pin_bananapi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + led_pins_bananapi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_usb1_vbus { + status = "okay"; +}; - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapi>; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; - }; +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- cgit v1.2.3 From b5ec9938b544c47f5cb536faa5637fde4b4b6156 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: cubieboard2: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 198 ++++++++++++++-------------- 1 file changed, 98 insertions(+), 100 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index c4ab6edb6f15..8c847eb70cad 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -59,96 +59,6 @@ model = "Cubietech Cubieboard2"; compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -164,26 +74,94 @@ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; -#include "axp209.dtsi" +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; -&cpu0 { - cpu-supply = <®_dcdc2>; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; }; +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_cubieboard2: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -208,3 +186,23 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 712a9fa2af03fefbb172e85c9b7930e78e7f634f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: cubietruck: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 316 ++++++++++++++--------------- 1 file changed, 157 insertions(+), 159 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8f74a649576d..0c219a419f49 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -59,144 +59,6 @@ model = "Cubietech Cubietruck"; compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc3_pins_a: mmc3@0 { - /* AP6210 requires pull-up */ - allwinner,pull = ; - }; - - vmmc3_pin_cubietruck: vmmc3_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - pwm: pwm@01c20e00 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; - status = "okay"; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -223,26 +85,6 @@ }; }; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_cubietruck>; - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - reg_usb0_vbus: usb0-vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; - gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; - reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -255,12 +97,141 @@ }; }; -#include "axp209.dtsi" +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; &cpu0 { cpu-supply = <®_dcdc2>; }; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc3_pins_a { + /* AP6210 requires pull-up */ + allwinner,pull = ; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vmmc3_pin_cubietruck: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_cubietruck: led_pins@0 { + allwinner,pins = "PH7", "PH11", "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + status = "okay"; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_cubietruck>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -285,3 +256,30 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_a>; + gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 9bb082547e46e7414aa84588b61b40e082f8bec9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: hummingbird: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 384 ++++++++++++++-------------- 1 file changed, 191 insertions(+), 193 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 2a9ee72b2b4a..8c30e126abe6 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -67,199 +67,6 @@ serial4 = &uart5; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_mmc3_vdd>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - allwinner,pins = "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - pwm: pwm@01c20e00 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; - status = "okay"; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - uart2: serial@01c28800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; - status = "okay"; - }; - - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; - status = "okay"; - }; - - uart4: serial@01c29000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; - }; - - uart5: serial@01c29400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - - i2c3: i2c@01c2b800 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; - }; - - spi2: spi@01c17000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_vdd>; - /* phy reset config */ - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ - snps,reset-active-low; - /* wait 1s after reset, otherwise fail to read phy id */ - snps,reset-delays-us = <0 10000 1000000>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; - - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; - gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ - status = "okay"; - }; - - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; - gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; - reg_mmc3_vdd: mmc3_vdd { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -282,3 +89,194 @@ gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */ }; }; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_vdd>; + /* phy reset config */ + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ + snps,reset-active-low; + /* wait 1s after reset, otherwise fail to read phy id */ + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_mmc3_vdd>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { + allwinner,pins = "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ + status = "okay"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 598699d073243eec4c9880a6b8c95ac092f560bd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: i12 tvbox: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 252 +++++++++++++++--------------- 1 file changed, 125 insertions(+), 127 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 06148b4d000f..baee563a0051 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -57,125 +57,6 @@ model = "I12 / Q5 / QT840A A20 tvbox"; compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc3_pins_a: mmc3@0 { - /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = ; - }; - - vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -192,14 +73,6 @@ }; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; - reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -236,3 +109,128 @@ gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; }; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc3_pins_a { + /* AP6210 / AP6330 requires pull-up */ + allwinner,pull = ; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vmmc3_pin_i12_tvbox: vmmc3_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + gmac_power_pin_i12_tvbox: gmac_power_pin@0 { + allwinner,pins = "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_i12_tvbox: led_pins@0 { + allwinner,pins = "PH9", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 22b10010cdf1d145320aa6aa91c9d9c2929333e8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: m3: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-m3.dts | 178 ++++++++++++++++++------------------- 1 file changed, 88 insertions(+), 90 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 5add9f243ec3..44ba67dfb494 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -59,114 +59,112 @@ model = "Mele M3"; compatible = "mele,m3", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m3>; - mmc2: mmc@01c11000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - non-removable; - status = "okay"; + blue { + label = "m3:blue:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; + }; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - ehci1: usb@01c1c000 { - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - pinctrl@01c20800 { - led_pins_m3: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&ohci0 { + status = "okay"; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&ohci1 { + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&pio { + led_pins_m3: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m3>; +®_usb1_vbus { + status = "okay"; +}; - blue { - label = "m3:blue:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; - }; - }; +®_usb2_vbus { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- cgit v1.2.3 From 5b178791a9a7817e691cb0fac9625826d5bea1e6 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: olinuxino lime: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 186 ++++++++++++------------- 1 file changed, 92 insertions(+), 94 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 12ded69d61eb..68efd2f33307 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -60,118 +60,116 @@ model = "Olimex A20-OLinuXino-LIME"; compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; + green { + label = "a20-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - ohci1: usb@01c1c400 { - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +&ohci0 { + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&ohci1 { + status = "okay"; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - green { - label = "a20-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +®_usb1_vbus { + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +®_usb2_vbus { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- cgit v1.2.3 From 6bd0027ee14aa13c3d23583c3d29f1a02dd7ad80 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: olinuxino lime2: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 288 ++++++++++++------------ 1 file changed, 143 insertions(+), 145 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 260dbd3bf29d..5e57157f742d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -57,176 +57,174 @@ model = "Olimex A20-OLinuXino-LIME2"; compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; + green { + label = "a20-olinuxino-lime2:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + reg_axp_ipsout: axp_ipsout { + compatible = "regulator-fixed"; + regulator-name = "axp-ipsout"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <®_axp_ipsout>; + vin2-supply = <®_axp_ipsout>; + vin3-supply = <®_axp_ipsout>; + ldo24in-supply = <®_axp_ipsout>; + ldo3in-supply = <®_axp_ipsout>; + + regulators { + vdd_rtc: ldo1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; }; - }; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + avcc: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; + vcc_csi0: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; }; - }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + vcc_csi1: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; + vdd_cpu: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; - phy1: ethernet-phy@1 { - reg = <1>; + vdd_int: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; }; }; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - green { - label = "a20-olinuxino-lime2:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_axp_ipsout: axp_ipsout { - compatible = "regulator-fixed"; - regulator-name = "axp-ipsout"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 581b19e5592c77cf041906d431f7734c3e7b6578 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: olinuxino micro: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 364 ++++++++++++------------ 1 file changed, 181 insertions(+), 183 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 5c548cfda0e4..f6f06311e25b 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -68,216 +68,214 @@ spi1 = &spi2; }; - soc@01c00000 { - spi1: spi@01c06000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; + green { + label = "a20-olinuxino-micro:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - spi2: spi@01c17000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - ehci1: usb@01c1c000 { - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - ohci1: usb@01c1c400 { - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - pinctrl@01c20800 { - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = ; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Search"; - linux,code = ; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <987387>; - }; - - button@1184 { - label = "Esc"; - linux,code = ; - channel = <0>; - voltage = <1184678>; - }; - - button@1398 { - label = "Enter"; - linux,code = ; - channel = <0>; - voltage = <1398804>; - }; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - uart6: serial@01c29800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; - status = "okay"; - }; + button@191 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <191274>; + }; - uart7: serial@01c29c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <392644>; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + button@601 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <601151>; + }; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + button@795 { + label = "Search"; + linux,code = ; + channel = <0>; + voltage = <795090>; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + button@987 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <987387>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@1184 { + label = "Esc"; + linux,code = ; + channel = <0>; + voltage = <1184678>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@1398 { + label = "Enter"; + linux,code = ; + channel = <0>; + voltage = <1398804>; + }; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + cd-inverted; + status = "okay"; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; +&ohci0 { + status = "okay"; +}; - green { - label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&ohci1 { + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; +&pio { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_ahci_5v { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; -- cgit v1.2.3 From 1366e357f2b2a26fe2e3ee014c193d65fc2ed74e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun7i: pcduino3: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 210 +++++++++++++++---------------- 1 file changed, 104 insertions(+), 106 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 0a2c2aeb4687..09ec96b2b7d7 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -59,105 +59,6 @@ model = "LinkSprite pcDuino3"; compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PH2"; - }; - - led_pins_pcduino3: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - key_pins_pcduino3: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -196,17 +97,114 @@ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; }; }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PH2"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; }; - reg_ahci_5v: ahci-5v { - gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; - status = "okay"; + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +®_ahci_5v { + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 1e9d5530932b614a5c01118b18fe710ea106fb72 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 31 Jan 2015 12:11:54 +0100 Subject: ARM: sun8i: ippo q8h v5: Convert to DT label based syntax In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 110 ++++++++++++++-------------- 1 file changed, 54 insertions(+), 56 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 623573e46080..4cb25f8267c8 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -66,69 +66,67 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; +}; - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - /* pull-ups and devices require PMIC regulator */ - status = "failed"; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; - r_uart: serial@01f02800 { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; - }; +&pio { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; }; }; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; -- cgit v1.2.3 From d3da93d47959c2a9ef399958ed1376809c388471 Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Sat, 28 Feb 2015 14:48:05 +0100 Subject: ARM: sun6i: dt: Add new Mele I7 device The Mele I7 is a Allwinner A31 based Android TV box, with 1G RAM, 8GB NAND flash, a RTL8188etv wifi chip, 3 USB Host ports using USB-A receptacles, a micro USB-B receptacle for USB OTG, HDMI out, a TRS connector for A/V, SPDIF and IrDA. This patch adds basic support for the device, more information can be found here (http://linux-sunxi.org/Mele_I7). Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun6i-a31-i7.dts | 150 +++++++++++++++++++++++++++++++++++++ 2 files changed, 151 insertions(+) create mode 100644 arch/arm/boot/dts/sun6i-a31-i7.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8c9c62ba6599..878afeca754e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -546,6 +546,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ sun6i-a31-hummingbird.dtb \ + sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ sun6i-a31s-cs908.dtb dtb-$(CONFIG_MACH_SUN7I) += \ diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts new file mode 100644 index 000000000000..049d3a6c09f2 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -0,0 +1,150 @@ +/* + * Copyright 2015 Marcus Cooper + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Mele I7 Quad top set box"; + compatible = "mele,i7", "allwinner,sun6i-a31"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_i7>; + + blue { + label = "i7:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_i7: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_i7: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb1_vbus_pin_i7: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_i7>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From ef1ac7c9631f58e1ee2f444942713324fddd86bb Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 3 Mar 2015 11:52:01 +0800 Subject: ARM: dts: sun6i: hummingbird: Enable IR receiver The A31 Hummingbird has an IR receiver. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 8b61b1b342e0..65ddaf4c72d2 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -106,6 +106,12 @@ }; }; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; -- cgit v1.2.3 From cbc8107b3e44d86dc7a569c5ae42423cb95bc4a5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 7 Mar 2015 20:01:18 +0100 Subject: ARM: dts: sun4i: Enable tablet keys on Chuwi V7 CW0825 Enable the lradc controlled tablet keys on the Chuwi V7 CW0825 tablet. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 27 +++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 58214f249598..97fca89eb92b 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -49,6 +49,7 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include +#include / { model = "Chuwi V7 CW0825"; @@ -74,6 +75,32 @@ }; }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@800 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Back"; + linux,code = ; + channel = <0>; + voltage = <1200000>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; -- cgit v1.2.3 From 3727ed3bb3c531650e4e65a46b4b5eb3176c5da9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 7 Mar 2015 20:01:19 +0100 Subject: ARM: dts: sun5i: Stop using different compatibles for ehci/ohci on a13 vs a10s The A13 and the A10s use the same die (this has been confirmed by Allwinner), as such there is no need to differentiate between the ehci/ohci parts of both, the only reasons there were different allwinner,sun5i-a*-foo compatible between these 2 parts is costemetically and because we could when we still had 2 completely different dtsi files. The allwinner,sun5i-a*-foo compatible strings are not used for binding at all, the actual driver binds to the generic-?hci compatible, so we can safely remove this cosmetical difference and simplify the dtsi files. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s.dtsi | 8 -------- arch/arm/boot/dts/sun5i-a13.dtsi | 8 -------- arch/arm/boot/dts/sun5i.dtsi | 2 ++ 3 files changed, 2 insertions(+), 16 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index ef516db5852d..a78c95dfb33f 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -157,14 +157,6 @@ }; }; -&ehci0 { - compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci"; -}; - -&ohci0 { - compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci"; -}; - &pio { compatible = "allwinner,sun5i-a10s-pinctrl"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 39264f7c7ae6..0188deed6f75 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -152,14 +152,6 @@ cooling-max-level = <5>; }; -&ehci0 { - compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; -}; - -&ohci0 { - compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; -}; - &pio { compatible = "allwinner,sun5i-a13-pinctrl"; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index e42cbb03620f..343ba1133bda 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -392,6 +392,7 @@ }; ehci0: usb@01c14000 { + compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; clocks = <&ahb_gates 1>; @@ -401,6 +402,7 @@ }; ohci0: usb@01c14400 { + compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <40>; clocks = <&usb_clk 6>, <&ahb_gates 2>; -- cgit v1.2.3 From e1fe9f8c0ce77208fd7da4585641cfc8c892e5c8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 7 Mar 2015 20:01:20 +0100 Subject: ARM: dts: sun5i: Add mmc2 pinmux settings Add A13 mmc2 pinmux settings, note these are for a 8bit bus. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 343ba1133bda..212da88ccc39 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -469,6 +469,15 @@ allwinner,drive = ; allwinner,pull = ; }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = ; + allwinner,pull = ; + }; }; timer@01c20c00 { -- cgit v1.2.3 From 0332e7dfe613259d8046e4b88704de43f17789a9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 7 Mar 2015 20:01:21 +0100 Subject: ARM: dts: sun5i: Add new Auxtek-t004 board The auxtek-t004: http://www.fasttech.com/products/1110/10004200/1318603-auxtek-t004-allwinner-a10s-single-core-android-ics Is an Allwinner A10s based hdmi tv stick with with 512M RAM, 4G nand flash, toc9002 (bcm43362) sdio wifi, 1 USB host ports using an USB-A receptacle and a 2 micro-usb receptacles, one for power and one for USB OTG. The sdio wifi appears to not have an oob irq hooked up, so we rely on sdio-irq support for it. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 151 +++++++++++++++++++++++++++ 2 files changed, 152 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 878afeca754e..50b36476781a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -536,6 +536,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts new file mode 100644 index 000000000000..6c6fef780984 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -0,0 +1,151 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include + +/ { + model = "Auxtek t004 A10s hdmi tv-stick"; + compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_t004>; + + red { + label = "t004-tv-dongle:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + default-state = "on"; + }; + }; + + reg_vmmc1: vmmc1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_vcc_en_pin_t004>; + regulator-name = "vmmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vmmc1>; + bus-width = <4>; + non-removable; + cap-sdio-irq; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_t004: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { + allwinner,pins = "PB18"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_t004: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb1_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 144cf39875b43ff0f4e281c31116b575c6f41f52 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 7 Mar 2015 20:01:22 +0100 Subject: ARM: dts: sun5i: Add new Utoo P66 board The UTOO P66 is a 6" A13 tablet / lcd ereader. It features a 6" 480x800 ips lcd screen, 512MB RAM & 4GB emmc. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 203 +++++++++++++++++++++++++++++++ 2 files changed, 205 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun5i-a13-utoo-p66.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 50b36476781a..70d1ba682df7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -542,7 +542,8 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb + sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-utoo-p66.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts new file mode 100644 index 000000000000..0f0a4112a0e3 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -0,0 +1,203 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include +#include + +/ { + model = "Utoo P66"; + compatible = "utoo,p66", "allwinner,sun5i-a13"; + + i2c_lcd: i2c@0 { + /* The lcd panel i2c interface is hooked up via gpios */ + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_lcd_pins>; + gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */ + <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */ + i2c-gpio,delay-us = <5>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_p66: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c_lcd_pins: i2c_lcd_pin@0 { + allwinner,pins = "PG10", "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; -- cgit v1.2.3 From 8bf1b9b3d90194a174493febc731f7783f2adf1a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 8 Mar 2015 21:53:42 +0100 Subject: ARM: dts: sunxi: Adjust touchscreen compatible for sun5i and later The touchscreen controller in the A13 and later has a different temperature curve than the one in the original A10, change the compatible for the A13 and later so that the kernel will use the correct curve. Reported-by: Tong Zhang Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 2 +- arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 212da88ccc39..244d8969757a 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -505,7 +505,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; + compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; #thermal-sensor-cells = <0>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index fdd181792b4b..2b4847c7cbd4 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -1042,7 +1042,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; + compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = ; #thermal-sensor-cells = <0>; -- cgit v1.2.3 From a486d0b2e9b9a09b9f873eb48bb1a9ac54ad5660 Mon Sep 17 00:00:00 2001 From: Aleksei Mamlin Date: Sun, 8 Mar 2015 14:57:33 +0300 Subject: ARM: dts: sun7i: Add dts file for Wexler TAB7200 This patch add support for Wexler TAB7200 tablet. The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480), capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot, mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port. Signed-off-by: Aleksei Mamlin Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 180 +++++++++++++++++++++++++ 2 files changed, 182 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 70d1ba682df7..92b3c85553ad 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -563,7 +563,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb \ - sun7i-a20-pcduino3-nano.dtb + sun7i-a20-pcduino3-nano.dtb \ + sun7i-a20-wexler-tab7200.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts new file mode 100644 index 000000000000..ea133bd3dd87 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -0,0 +1,180 @@ +/* + * Copyright 2015 Aleksei Mamlin + * Aleksei Mamlin + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Wexler TAB7200"; + compatible = "wexler,tab7200", "allwinner,sun7i-a20"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@571 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <571428>; + }; + + button@761 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <761904>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 6d11c8e2b3aa0993a3cc6e65dc942dd348db5882 Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Mon, 9 Mar 2015 13:19:57 -0700 Subject: ARM: dts: add cubietech cubieboard4 Add a Cubietech Cubieboard4 device tree and instruct make to build it. This device tree has been derived from the sun9i-a80-optimus.dts as they are very similar in design[1]. Notably, I2C3 is not used on Cubieboard4 and the LED/PWM definitions will need to be updated in the future. [1] http://dl.cubieboard.org/model/cc-a80/Hardware/CC-A80-HW-V1.1.pdf Signed-off-by: Tyler Baker Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 99 +++++++++++++++++++++++++++++ 2 files changed, 101 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 92b3c85553ad..c6e95ab4e568 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -569,7 +569,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb dtb-$(CONFIG_MACH_SUN9I) += \ - sun9i-a80-optimus.dtb + sun9i-a80-optimus.dtb \ + sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ tegra20-iris-512.dtb \ diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts new file mode 100644 index 000000000000..6484dcf69873 --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -0,0 +1,99 @@ +/* + * Copyright 2015 Tyler Baker + * + * Tyler Baker + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun9i-a80.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Cubietech Cubieboard4"; + compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + +}; + +&pio { + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; -- cgit v1.2.3 From fcd601387d70db31ac5e0a17ca584f088821b459 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 10 Mar 2015 19:59:12 +0800 Subject: ARM: dts: sun6i: add p2wi controller node to dtsi The p2wi controller has only one possible pinmux setting. Use it by default in the dtsi, instead of having to set it in each board's dts. Signed-off-by: Boris BREZILLON [wens@csie.org: reformat commit title; rename p2wi pins and use as default] Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index fa2f403ccf28..92abea20b946 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -973,6 +973,27 @@ allwinner,drive = ; allwinner,pull = ; }; + + p2wi_pins: p2wi { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_p2wi"; + allwinner,drive = ; + allwinner,pull = ; + }; + }; + + p2wi: i2c@01f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = ; + clocks = <&apb0_gates 3>; + clock-frequency = <100000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&p2wi_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; -- cgit v1.2.3 From 252619aedd616d7358d96877a467d74d19791e69 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 10 Mar 2015 19:59:13 +0800 Subject: ARM: dts: sun6i: hummingbird: Enable P2WI controller The Hummingbird A31 has an AXP221 PMIC hooked up to the P2WI controller. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 65ddaf4c72d2..533bedc5dd95 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -140,6 +140,10 @@ }; }; +&p2wi { + status = "okay"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; -- cgit v1.2.3 From 81bc1d38a4f83aa3bee0795c212f829b3cd23ae1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 10 Mar 2015 19:59:16 +0800 Subject: ARM: dts: sun6i: hummingbird: Add AXP221 PMIC device node The Hummingbird A31 has an AXP221 PMIC hooked up to the P2WI controller. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 533bedc5dd95..486ffc69ac96 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -142,6 +142,15 @@ &p2wi { status = "okay"; + + axp221: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; }; ®_usb1_vbus { -- cgit v1.2.3 From bab03561224baa536b98f1d137d2b6b5dd159763 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 10 Mar 2015 19:59:21 +0800 Subject: ARM: dts: sun6i: hummingbird: Add AXP221 regulator nodes This patch adds the AXP221 regulators. Only the ones directly used on the board are added. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 56 ++++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 486ffc69ac96..d13c88c6509a 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -115,7 +115,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <&vcc_3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; @@ -150,6 +150,60 @@ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + dcdc1-supply = <&vcc_3v0>; + dcdc5-supply = <&vcc_dram>; + + regulators { + x-powers,dcdc-freq = <3000>; + + vcc_3v0: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; + }; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; + }; + + vdd_gpu: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; + }; + + vdd_sys_dll: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-dll"; + }; + + vcc_dram: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; + }; + + vcc_wifi: aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; + + avcc: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + }; }; }; -- cgit v1.2.3 From 4c1bb9c31877d58c5d6f5c92327566fc8a5f99ac Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 10 Mar 2015 16:27:09 +0100 Subject: ARM: dts: sunxi: Add address- and size-cells properties to the mmc ctrl nodes Sometimes we need to specify non-probably information for sdio devices in the devicetree, this is done through child nodes addressed by the reg property, whereby the reg property refers to the sdio function number, see; Documentation/devicetree/bindings/mmc/mmc.txt This commit adds the necessary address- and size-cells properties to the mmc controller nodes in the dtsi files, so that dts files needing such a child node do not need to specify these themselves. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ arch/arm/boot/dts/sun5i.dtsi | 6 ++++++ arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++ arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ arch/arm/boot/dts/sun8i-a23.dtsi | 6 ++++++ arch/arm/boot/dts/sun9i-a80.dtsi | 8 ++++++++ 6 files changed, 44 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 17e4598db176..dcc357b42ae9 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -521,6 +521,8 @@ "sample"; interrupts = <32>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -536,6 +538,8 @@ "sample"; interrupts = <33>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -551,6 +555,8 @@ "sample"; interrupts = <34>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -566,6 +572,8 @@ "sample"; interrupts = <35>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c13400 { diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 244d8969757a..df5f2fbf6974 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -347,6 +347,8 @@ "sample"; interrupts = <32>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -362,6 +364,8 @@ "sample"; interrupts = <33>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -377,6 +381,8 @@ "sample"; interrupts = <34>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c13400 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 92abea20b946..d9ccae7376ad 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -402,6 +402,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -419,6 +421,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -436,6 +440,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -453,6 +459,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c19400 { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 2b4847c7cbd4..24eae39eefa6 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -600,6 +600,8 @@ "sample"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -615,6 +617,8 @@ "sample"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -630,6 +634,8 @@ "sample"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -645,6 +651,8 @@ "sample"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c13400 { diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 382ebd137ee4..85e7b2b9b11b 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -286,6 +286,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -303,6 +305,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -320,6 +324,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; pio: pinctrl@01c20800 { diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 2f7f82cc86ba..abe7bbf8aa83 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -447,6 +447,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -459,6 +461,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -471,6 +475,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -483,6 +489,8 @@ reset-names = "ahb"; interrupts = ; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc_config_clk: clk@01c13000 { -- cgit v1.2.3 From 7862eb1b59eef343343dbdd0136fbf175184e538 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 10 Mar 2015 16:27:10 +0100 Subject: ARM: dts: sun7i: Add OOB irq support to boards with broadcom sdio wifi Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 8 ++++++++ 2 files changed, 16 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 0c219a419f49..5af1df795f3c 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -173,6 +173,14 @@ bus-width = <4>; non-removable; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; }; &mmc3_pins_a { diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index baee563a0051..c11574c2b931 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -170,6 +170,14 @@ bus-width = <4>; non-removable; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; }; &mmc3_pins_a { -- cgit v1.2.3 From 878c4ded1f15e6c2231b5d05bc8f21920f8a777f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 10 Mar 2015 19:59:22 +0800 Subject: ARM: dts: sun6i: Add pinmux settings for mmc1 to dtsi mmc1 is used to connect to the WiFi chip on the Hummingbird A31. Signed-off-by: Chen-Yu Tsai [maxime: Changed the drive and pull values for their defines] Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index d9ccae7376ad..2a37ee93265e 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -589,6 +589,14 @@ allwinner,pull = ; }; + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = ; + allwinner,pull = ; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", -- cgit v1.2.3 From b5c26d66a4bba25b3a7f1c6ff599975f448e54bd Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 10 Mar 2015 19:59:24 +0800 Subject: ARM: dts: sun6i: hummingbird: Enable the onboard WiFi module The Hummingbird A31 has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi part is a BCM43362 IC connected to MMC1 in the A31 SoC via SDIO. The IC also takes a power enable signal via GPIO. This is supported with the new power sequencing bindings. The WiFi module supports out-of-band interrupt signaling via GPIO, but this is not enabled yet. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index d13c88c6509a..25a3ef49bb71 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -61,6 +61,11 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ + }; }; &ehci0 { @@ -127,6 +132,16 @@ allwinner,pull = ; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; + vmmc-supply = <&vcc_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -138,6 +153,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + wifi_reset_pin_hummingbird: wifi_reset_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; }; &p2wi { -- cgit v1.2.3 From 65ef564f06c30f779a7472ab441fd1964a5f0e47 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 18 Mar 2015 11:24:00 +0800 Subject: ARM: dts: sun8i: Enable ARM architected timer on A23 The A23 SoC has the architected timer, but the existing firmware from Allwinner does not set CNTFRQ at all. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 85e7b2b9b11b..9ff9227e2ab7 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -70,6 +70,16 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + cpus { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 51e9f5ffc5b88ea0d2626edef737e582fe7039d8 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 18 Mar 2015 16:00:28 +0800 Subject: ARM: dts: sun9i: Enable ARM architected timer on A80 The A80 SoC has the architected timer, but the existing firmware from Allwinner does not set CNTFRQ at all. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index abe7bbf8aa83..d3dece2eea72 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -114,6 +114,16 @@ reg = <0 0x20000000 0x02 0>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + clocks { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From f1bf2b9b3d4b2bd4a49a2e3ddf4c947d366a150c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 14 Mar 2015 11:57:17 +0800 Subject: ARM: dts: sun9i: optimus: Switch to phy core regulator bindings for usb phys Since the phy core already supports specifying a regulator to handle during power up/down, it was decided to drop the regulator support in the sun9i usb phy driver. This patch switches the DT to the core bindings. This and the phy driver would be in the same release and should not be a problem as far as DT stability goes. Signed-off-by: Chen-Yu Tsai Acked-by: Kishon Vijay Abraham I Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index e53f2656c2d0..c6ca116c59d2 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -203,7 +203,7 @@ }; &usbphy1 { - vbus-supply = <®_usb1_vbus>; + phy-supply = <®_usb1_vbus>; status = "okay"; }; @@ -212,6 +212,6 @@ }; &usbphy3 { - vbus-supply = <®_usb3_vbus>; + phy-supply = <®_usb3_vbus>; status = "okay"; }; -- cgit v1.2.3 From b14c112344996c3400bd588982e61fef7fe0ea64 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 21 Mar 2015 14:23:01 +0100 Subject: ARM: dts: sun6i: csq cs908 dts cleanup Remove the unused usb1_vbus_pin_csq908 node (vbus is always on on the cs908), and sort the remaining nodes alphabetically. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-cs908.dts | 37 +++++++++++++--------------------- 1 file changed, 14 insertions(+), 23 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index bc3734f67cf0..3f0cc8c58df8 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -55,10 +55,6 @@ compatible = "csq,cs908", "allwinner,sun6i-a31s"; }; -&usbphy { - status = "okay"; -}; - &ehci0 { status = "okay"; }; @@ -67,25 +63,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - -&pio { - usb1_vbus_pin_csq908: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_mii_a>; @@ -102,3 +79,17 @@ pinctrl-0 = <&ir_pins_a>; status = "okay"; }; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3 From 59ebbe88a6431d0bd99c792f413ecf69273f2e9d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 15 Mar 2015 20:47:31 +0100 Subject: ARM: sunxi: DT: Add stdout-path property Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-hackberry.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-marsboard.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-mk802.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-mk802ii.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 8 ++++++++ arch/arm/boot/dts/sun4i-a10-pcduino.dts | 7 +++++++ arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 8 ++++++++ arch/arm/boot/dts/sun5i-a10s-mk802.dts | 8 ++++++++ arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 4 ++++ arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts | 8 ++++++++ arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 4 ++++ arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 4 ++++ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 4 ++++ arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 6 +++++- arch/arm/boot/dts/sun6i-a31-colombus.dts | 6 +++++- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 6 +++++- arch/arm/boot/dts/sun6i-a31-i7.dts | 6 +++++- arch/arm/boot/dts/sun6i-a31-m9.dts | 6 +++++- arch/arm/boot/dts/sun6i-a31s-cs908.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-bananapi.dts | 4 ++++ arch/arm/boot/dts/sun7i-a20-bananapro.dts | 10 ++++++++++ arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 4 ++++ arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-m3.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 4 ++++ arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 8 ++++++++ arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 8 ++++++++ arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 2 +- arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 +- 42 files changed, 280 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 648626bc58a1..f03281434e59 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -58,6 +58,14 @@ model = "Mele A1000"; compatible = "mele,a1000", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index bebb803a9456..1a3c7ddc538a 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -54,6 +54,14 @@ / { model = "BA10 tvbox"; compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 97fca89eb92b..35fb163827de 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -54,6 +54,14 @@ / { model = "Chuwi V7 CW0825"; compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci1 { diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 07c2f64b14ee..0ba67d79c2b4 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -57,6 +57,14 @@ model = "Cubietech Cubieboard"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 0c7345380793..fbd638a38018 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -56,6 +56,14 @@ / { model = "Gemei G9 Tablet"; compatible = "gemei,g9", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; /* diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 3cb067ed8715..f4437883fba7 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -58,6 +58,14 @@ model = "Miniand Hackberry"; compatible = "miniand,hackberry", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; regulator-name = "emac-3v3"; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index c88382aacc36..9f06b1805058 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -53,6 +53,14 @@ / { model = "Hyundai A7HD"; compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci1 { diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index ab3bbc13db1c..e19ef52f3579 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -56,6 +56,14 @@ / { model = "INet-97F Rev 02"; compatible = "primux,inet97fv2", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 9ee86a700c2b..00c54d2a1824 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -57,6 +57,14 @@ model = "HAOYU Electronics Marsboard A10"; compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index dce9a341516b..0f24914c1a6e 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -57,6 +57,14 @@ / { model = "PineRiver Mini X-Plus"; compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index e9a6886f0d51..0f1c99133c9c 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -53,6 +53,14 @@ / { model = "MK802"; compatible = "allwinner,mk802", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index 802eda494d1c..f97aa6f523f4 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -53,6 +53,14 @@ / { model = "MK802ii"; compatible = "allwinner,mk802ii", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 03350dff42b1..5840d5e16b99 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -56,6 +56,14 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 6923ca75eb4a..be6948e41648 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -58,6 +58,13 @@ model = "LinkSprite pcDuino"; compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 6c6fef780984..ceb0582ac90d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -55,6 +55,14 @@ model = "Auxtek t004 A10s hdmi tv-stick"; compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index b21af87d9eae..e1a11e1d967d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -54,6 +54,14 @@ model = "MK802-A10s"; compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index aa88ee887381..85a8745fffb3 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -65,6 +65,10 @@ serial2 = &uart3; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index d42ce170e640..9980969d0986 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -56,6 +56,14 @@ model = "R7 A10s hdmi tv-stick"; compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index b59255a445bc..adf78a234ffb 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -59,6 +59,10 @@ aliases { serial0 = &uart1; }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &cpu0 { diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index bdb0a094223f..4a00bcee9272 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -61,6 +61,10 @@ serial0 = &uart1; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index d09c57b4905b..44401565533f 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -63,6 +63,10 @@ serial0 = &uart1; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 98a74da02fd7..b7b1df4be460 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -58,8 +58,12 @@ model = "Allwinner A31 APP4 EVB1 Evaluation Board"; compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index d6e925c381a3..95d7ec2b2955 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -58,8 +58,12 @@ model = "WITS A31 Colombus Evaluation Board"; compatible = "wits,colombus", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 25a3ef49bb71..1e820bc0c768 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -58,8 +58,12 @@ model = "Merrii A31 Hummingbird"; compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 049d3a6c09f2..ce37d69d3416 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -56,8 +56,12 @@ model = "Mele I7 Quad top set box"; compatible = "mele,i7", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 5cbbbd696b00..29f5fc717b4f 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -56,8 +56,12 @@ model = "Mele M9 / A1000G Quad top set box"; compatible = "mele,m9", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index 3f0cc8c58df8..68cb2bf39988 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -53,6 +53,14 @@ / { model = "CSQ CS908 top set box"; compatible = "csq,cs908", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 6d1faf069e7e..b952ac445504 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -65,6 +65,10 @@ serial2 = &uart7; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index fb89fe7ed21b..9d9027f25a44 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -55,6 +55,16 @@ model = "LeMaker Banana Pro"; compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + serial1 = &uart2; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 8c847eb70cad..3c817ac9360b 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -59,6 +59,14 @@ model = "Cubietech Cubieboard2"; compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 5af1df795f3c..613a19e63e58 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -59,6 +59,14 @@ model = "Cubietech Cubietruck"; compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 8c30e126abe6..d3f15c2e721e 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -67,6 +67,10 @@ serial4 = &uart5; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + reg_mmc3_vdd: mmc3_vdd { compatible = "regulator-fixed"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index c11574c2b931..3f99b3f222a7 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -57,6 +57,14 @@ model = "I12 / Q5 / QT840A A20 tvbox"; compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 44ba67dfb494..f2fb26e7d6e5 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -59,6 +59,14 @@ model = "Mele M3"; compatible = "mele,m3", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 68efd2f33307..6592cb21e32c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -60,6 +60,14 @@ model = "Olimex A20-OLinuXino-LIME"; compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 5e57157f742d..3a7a2c2b488c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -57,6 +57,14 @@ model = "Olimex A20-OLinuXino-LIME2"; compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index f6f06311e25b..82802b6cb192 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -68,6 +68,10 @@ spi1 = &spi2; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 632b8a9e092f..810c5f764595 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -55,6 +55,14 @@ model = "LinkSprite pcDuino3 Nano"; compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 09ec96b2b7d7..cd05267781fb 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -59,6 +59,14 @@ model = "LinkSprite pcDuino3"; compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index ea133bd3dd87..2ad3b09dcb6f 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -57,6 +57,14 @@ / { model = "Wexler TAB7200"; compatible = "wexler,tab7200", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &cpu0 { diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 4cb25f8267c8..f5658d123f9b 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -64,7 +64,7 @@ }; chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index c6ca116c59d2..e463138a4d04 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -64,7 +64,7 @@ }; chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; leds { -- cgit v1.2.3 From 3a2bc642abee100511021b263032329f94e3a1e4 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 26 Mar 2015 05:04:48 +0800 Subject: ARM: dts: sun6i: Add cpu clock reference and operating points to dtsi The cpu core is clocked from the "cpu" clock. Add a reference to it in the first cpu node. Also add "cpu0" label to the node. The operating points were taken from the a list compiled by Maxime Ripard, which is based on A31 FEX files from the sunxi-boards repository. Not all boards have the same settings. The settings in this patch are the ones shared by A/B/C revisions, plus the default clock setting from u-boot. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 2a37ee93265e..9ea0edb9684c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -96,10 +96,22 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <3>; }; cpu@1 { -- cgit v1.2.3 From eb58b40fb62413d820407c8210acb6c2f1ac1d9b Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 26 Mar 2015 05:04:49 +0800 Subject: ARM: dts: sun6i: Add cpu thermal zones to dtsi The core temperature sensor now supports thermal zones. Add a thermal zone mapping for the cpus with passive cooling (cpufreq throttling). Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 9ea0edb9684c..25a97f08d94b 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -50,6 +50,7 @@ #include "skeleton.dtsi" #include +#include #include @@ -133,6 +134,38 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; -- cgit v1.2.3 From f2641d2a9126846dd2d9e8c3910d7134e1bfbbda Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 18 Mar 2015 11:24:02 +0800 Subject: ARM: sun8i: dt: Enable A23 SMP support Add enable-method property to enable SMP support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 9ff9227e2ab7..6d6eda398e31 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -81,6 +81,7 @@ }; cpus { + enable-method = "allwinner,sun8i-a23"; #address-cells = <1>; #size-cells = <0>; @@ -593,6 +594,11 @@ }; }; + cpucfg@01f01c00 { + compatible = "allwinner,sun8i-a23-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + r_uart: serial@01f02800 { compatible = "snps,dw-apb-uart"; reg = <0x01f02800 0x400>; -- cgit v1.2.3 From dd2fd84ffd00f529bf1fbb546779db3834417b8a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Apr 2015 17:26:24 +0200 Subject: ARM: dts: sun5i: Add broken-hpi property for Utoo-P66 eMMC The eMMC on the A13 based Utoo-P66 tablet does not properly support hpi, and trying to enable it results in the eMMC not working, so add a child-node describing the eMMC, and set the broken-hpi property on it. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 0f0a4112a0e3..f2476eaecce2 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -135,6 +135,12 @@ bus-width = <8>; non-removable; status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; }; &pio { -- cgit v1.2.3 From 6d92b80f356f35b48b1fcec22a4562536aa03dbb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 26 Mar 2015 15:53:42 +0100 Subject: ARM: dts: sun4i: Add A10 SRAM and SRAM controller The A10 has a few SRAM that can be mapped either to a device or to the CPU, with the mapping being controlled by a SRAM controller. Since most of the time these SRAM won't be accessible by the CPU, we can't use the mmio-sram driver and compatible. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index dcc357b42ae9..1d7fd68bea1d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -450,12 +450,46 @@ }; }; + /* + * Note we use the address where the mmio registers start, not where + * the SRAM blocks start, this cannot be changed because that would be + * a devicetree ABI change. + */ soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + sram@00000000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00000000 0x4000>; + allwinner,sram-name = "A1"; + }; + + sram@00004000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00004000 0x4000>; + allwinner,sram-name = "A2"; + }; + + sram@00008000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00008000 0x4000>; + allwinner,sram-name = "A3-A4"; + }; + + sram@00010000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00010000 0x1000>; + allwinner,sram-name = "D"; + }; + + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; -- cgit v1.2.3 From e6f51e4bd2a5bb12678330033dc995192507426f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 26 Mar 2015 15:53:43 +0100 Subject: ARM: dts: sun5i: Add A13 and A10s SRAM and SRAM controller The A13 / A10s has a few SRAM that can be mapped either to a device or to the CPU, with the mapping being controlled by a SRAM controller. Since most of the time these SRAM won't be accessible by the CPU, we can't use the mmio-sram driver and compatible. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index df5f2fbf6974..96b20d646b3f 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -292,12 +292,46 @@ }; }; + /* + * Note we use the address where the mmio registers start, not where + * the SRAM blocks start, this cannot be changed because that would be + * a devicetree ABI change. + */ soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + sram@00000000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00000000 0x4000>; + allwinner,sram-name = "A1"; + }; + + sram@00004000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00004000 0x4000>; + allwinner,sram-name = "A2"; + }; + + sram@00008000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00008000 0x4000>; + allwinner,sram-name = "A3-A4"; + }; + + sram@00010000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00010000 0x1000>; + allwinner,sram-name = "D"; + }; + + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; -- cgit v1.2.3 From ccb4ada2f193c7d5dc944cc925d1f58e5a007c0c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 26 Mar 2015 15:53:44 +0100 Subject: ARM: dts: sun7i: Add A20 SRAM and SRAM controller The A20 has a few SRAM that can be mapped either to a device or to the CPU, with the mapping being controlled by a SRAM controller. Since most of the time these SRAM won't be accessible by the CPU, we can't use the mmio-sram driver and compatible. Signed-off-by: Maxime Ripard [hdegoede@redhat.com: Do not change soc node name, change compatible to sun4i-a10-sram-controller to match the driver change] Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 24eae39eefa6..d4ba77202d7a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -521,12 +521,46 @@ }; }; + /* + * Note we use the address where the mmio registers start, not where + * the SRAM blocks start, this cannot be changed because that would be + * a devicetree ABI change. + */ soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + sram@00000000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00000000 0x4000>; + allwinner,sram-name = "A1"; + }; + + sram@00004000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00004000 0x4000>; + allwinner,sram-name = "A2"; + }; + + sram@00008000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00008000 0x4000>; + allwinner,sram-name = "A3-A4"; + }; + + sram@00010000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00010000 0x1000>; + allwinner,sram-name = "D"; + }; + + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + }; + nmi_intc: interrupt-controller@01c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; -- cgit v1.2.3 From 69ddea353287ea0cc866239d7ee70c378c3cbe81 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 4 Apr 2015 10:59:53 +0200 Subject: ARM: dts: sun7i: Add dts file for the Orangepi SBC The Orangepi is a development board using the Allwinner A20 SoC, with 1G RAM, microsd slot, HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A ports, ir receiver and a headphones jack. Also see: http://linux-sunxi.org/Xunlong_Orange_Pi http://www.orangepi.org/ Signed-off-by: Hans de Goede [maxime: Added /chosen/stdout-path] Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-orangepi.dts | 233 +++++++++++++++++++++++++++++++ 2 files changed, 234 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-orangepi.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c6e95ab4e568..25f3db729f8d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -562,6 +562,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-orangepi.dtb \ sun7i-a20-pcduino3.dtb \ sun7i-a20-pcduino3-nano.dtb \ sun7i-a20-wexler-tab7200.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts new file mode 100644 index 000000000000..7e6405c5448f --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -0,0 +1,233 @@ +/* + * Copyright 2015 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Orange Pi"; + compatible = "xunlong,orangepi", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_orangepi>; + + green { + label = "orangepi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp209.dtsi" + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_orangepi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH26"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From fe0807c57e2b4d6c4f900bd554ea33fafbb49c51 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 4 Apr 2015 10:59:54 +0200 Subject: ARM: dts: sun7i: Add dts file for the Orangepi mini SBC The Orangepi mini is a development board using the Allwinner A20 SoC, with 1G RAM, 2 microsd slots (use the top side one for booting), HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A ports, ir receiver and a headphones jack. Also see: http://linux-sunxi.org/Xunlong_Orange_Pi_Mini http://www.orangepi.org/ Signed-off-by: Hans de Goede [maxime: Added /chosen/stdout-path] Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 255 ++++++++++++++++++++++++++ 2 files changed, 256 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 25f3db729f8d..a71d3c77f87d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -563,6 +563,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-orangepi.dtb \ + sun7i-a20-orangepi-mini.dtb \ sun7i-a20-pcduino3.dtb \ sun7i-a20-pcduino3-nano.dtb \ sun7i-a20-wexler-tab7200.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts new file mode 100644 index 000000000000..0556938a5d4d --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -0,0 +1,255 @@ +/* + * Copyright 2015 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Orange Pi Mini"; + compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_orangepi>; + + green { + label = "orangepi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + }; + + blue { + label = "orangepi:blue:usr"; + gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp209.dtsi" + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_orangepi: led_pins@0 { + allwinner,pins = "PH24", "PH25"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH26"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 2a53aff2723676a873406403be5370074ed86fc3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Apr 2015 17:29:37 +0200 Subject: ARM: dts: sun5i: Enable touchscreen on Utoo P66 Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index f2476eaecce2..d2303da6915d 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -50,6 +50,7 @@ #include "sunxi-common-regulators.dtsi" #include #include +#include #include / { @@ -93,6 +94,20 @@ pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + icn8318: touchscreen@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -158,6 +173,13 @@ allwinner,pull = ; }; + ts_wake_pin_p66: ts_wake_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + usb0_vbus_pin_a: usb0_vbus_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_out"; -- cgit v1.2.3 From ae3bdfe0efe0417b702e6501015375c44226ec23 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 23 Apr 2015 14:26:50 +0200 Subject: ARM: dts: sun7i: Add dts file for the Jesurun Q5 top set box The Jesurun Q5 has a black plastic casing with the approximate dimensions of 100mm x 100mm x 24mm with rounded edges. In terms of hardware it features an Allwinner A10 SoC with 1GB RAM and 8GB of NAND flash. The external connectors are: 2x USB-A female supporting USB2.0, 3.5mm female jack for audio, HDMI female, SPDIF, RJ45 LAN and Power. In addition the device has 1x red LED (hard wired to power) and an programmable green led. On the board there is also an unpopulated IR receiver and the UART. The devices is equipped with an AXP209 PMU. For more details see: http://linux-sunxi.org/Jesurun_Q5 Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 194 +++++++++++++++++++++++++++++ 2 files changed, 195 insertions(+) create mode 100644 arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a71d3c77f87d..83a4e685b0a5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -529,6 +529,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ sun4i-a10-inet97fv2.dtb \ + sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-mk802.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts new file mode 100644 index 000000000000..1b0452fea273 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -0,0 +1,194 @@ +/* + * Copyright 2015 Gábor Nyers + * + * Gábor Nyers + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Jesurun Q5"; + compatible = "jesurun,q5", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_q5>; + + green { + label = "q5:green:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ + }; + + }; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_q5>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + emac_power_pin_q5: emac_power_pin@0 { + allwinner,pins = "PH19"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_q5: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From 771969ec96ce90413bd749f23409d5266620f1ae Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 23 Mar 2015 16:49:57 +0100 Subject: ARM: ux500: define CPU topology The CPU topology is unspecified for Ux500 but will be needed for things like CoreSight. Let's just add it. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index bfd3f1c734b8..bd6bd0926931 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -22,6 +22,32 @@ interrupt-parent = <&intc>; ranges; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + intc: interrupt-controller@a0411000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; -- cgit v1.2.3 From 2186df37831a8bb259bbf2ae07356747a03d0b8d Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 25 Mar 2015 01:22:09 +0800 Subject: ARM: dts: sunxi: Update ahb clocks for sun5i and sun7i The clock driver now supports a muxable ahb clock. Update the dtsi with the proper compatible and add the new parent clocks. This also adds the new pll6/4 output for pll6 on sun7i-a20. The output is not used on sun4/5i. Also use assigned-clocks to reparent ahb to pll6. We want ahb to have a stable, non-changing clock rate. cpu/axi clock rate changes as a result of newly added cpufreq support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 10 ++++++++-- arch/arm/boot/dts/sun7i-a20.dtsi | 13 ++++++++++--- 2 files changed, 18 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 96b20d646b3f..8c04f240f2e9 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -150,10 +150,16 @@ ahb: ahb@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun5i-a13-ahb-clk"; reg = <0x01c20054 0x4>; - clocks = <&axi>; + clocks = <&axi>, <&cpu>, <&pll6 1>; clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 1>; }; apb0: apb0@01c20054 { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index d4ba77202d7a..4163ade867cb 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -224,7 +224,8 @@ compatible = "allwinner,sun4i-a10-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; + clock-output-names = "pll6_sata", "pll6_other", "pll6", + "pll6_div_4"; }; pll8: clk@01c20040 { @@ -253,10 +254,16 @@ ahb: ahb@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun5i-a13-ahb-clk"; reg = <0x01c20054 0x4>; - clocks = <&axi>; + clocks = <&axi>, <&pll6 3>, <&pll6 1>; clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 3>; }; ahb_gates: clk@01c20060 { -- cgit v1.2.3 From f22fe1c5ab9f061b7e27e1eb31426d106deb1e22 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 26 Mar 2015 05:04:47 +0800 Subject: ARM: dts: sun6i: Set PLL6 as parent to AHB1 clock in AHB1 clock node On sun6i we already have PLL6 as AHB1 clock's parent. However this was previously set in the dma controller node, which takes effect when the dma controller is probed. We want this to take effect as soon as possible, so hrtimer rate calculation is correct, and to be sure the AHB1 clock rate remains as stable as possible. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 25a97f08d94b..60d912eeb7c7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -241,6 +241,14 @@ reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; + + /* + * Clock AHB1 from PLL6, instead of CPU/AXI which + * has rate changes due to cpufreq. Also the DMA + * controller requires AHB1 clocked from PLL6. + */ + assigned-clocks = <&ahb1>; + assigned-clock-parents = <&pll6 0>; }; ahb1_gates: clk@01c20060 { @@ -426,10 +434,6 @@ clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; - - /* DMA controller requires AHB1 clocked from PLL6 */ - assigned-clocks = <&ahb1>; - assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { -- cgit v1.2.3 From f18407800e5d211028858f86f1e78aacbedad298 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 7 Apr 2015 10:52:39 -0700 Subject: ARM: dts: rockchip: Enable Cortex-A12 HW PMU events on rk3288 This adds the dts node for the PMU with the correct PMUIRQ interrupts for each core. Signed-off-by: Sonny Rao Reviewed-by: Doug Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 165968d51d8f..8253abb83f36 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -44,6 +44,14 @@ spi2 = &spi2; }; + arm-pmu { + compatible = "arm,cortex-a12-pmu"; + interrupts = , + , + , + ; + }; + cpus { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From e565abe10b851bd1c90f8a39e2e4695f337f3cb0 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 11 Mar 2015 15:15:17 -0700 Subject: ARM: dts: rockchip: Specify VMMC and VQMMC on rk3288-evb Specifying these rails should eventually let us do UHS. Signed-off-by: Doug Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-evb.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4a457518d861..41f5f2a02387 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -112,6 +112,23 @@ regulator-always-on; regulator-boot-on; }; + + /* + * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from + * vcc_io directly. Those boards won't be able to power cycle SD cards + * but it shouldn't hurt to toggle this pin there anyway. + */ + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; }; &emmc { @@ -141,6 +158,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; status = "okay"; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; }; &i2c0 { @@ -232,6 +251,10 @@ sdmmc_cmd: sdmmc-cmd { rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; usb { -- cgit v1.2.3 From 71126029211cf67b64ed8b4f03cced508d32efd5 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 6 Apr 2015 02:10:09 +0200 Subject: ARM: dts: rockchip: add act8846 supplies on rk3288-firefly We defined bindings for the supply handling of act8846 regulators now, so describe those on the firefly too. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-firefly.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index b54dd78580c1..a3b1fc43228b 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -246,6 +246,14 @@ pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; system-power-controller; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_sys>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + regulators { vcc_ddr: REG1 { regulator-name = "vcc_ddr"; -- cgit v1.2.3 From 8c653f9ab6e56921b3704c0b8191f5432de02ad7 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sun, 5 Apr 2015 11:15:01 +0200 Subject: ARM: dts: rockchip: enable tsadc on rk3288 boards The tsadc is used to read cpu and gpu temperatures. Also enable it on the other rk3288 boards beside the evb using the cru reset settings. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-firefly.dtsi | 6 ++++++ arch/arm/boot/dts/rk3288-popmetal.dts | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index a3b1fc43228b..0b42372e4379 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -465,6 +465,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index d081f0e0da36..d582811fbd7b 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -406,6 +406,12 @@ }; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &vopb { status = "okay"; }; -- cgit v1.2.3 From cabd2ea21636ba7268232b8e2102671f47d2923f Mon Sep 17 00:00:00 2001 From: Yunzhi Li Date: Sun, 26 Apr 2015 17:41:38 +0800 Subject: ARM: dts: rockchip: add properties for dwc2 usb otg controller Add properties for dwc2 usb device controller according to Documentation/devicetree/bindings/usb/dwc2.txt Signed-off-by: Yunzhi Li Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 8253abb83f36..280aecd35c27 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -442,6 +442,7 @@ interrupts = ; clocks = <&cru HCLK_USBHOST1>; clock-names = "otg"; + dr_mode = "host"; phys = <&usbphy2>; phy-names = "usb2-phy"; status = "disabled"; @@ -454,6 +455,11 @@ interrupts = ; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; -- cgit v1.2.3 From dc2f8152535132bcec5ce2d473924ad9251b41e7 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:42:44 +0100 Subject: ARM: dts: qcom: apq8064 - add RPM regulators support This patch adds rpm node to apq8064 dt as rpm would be used by other devices for regulator support. Signed-off-by: Srinivas Kandagatla Reviewed-by: Bjorn Andersson Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 6c1511263a55..19629c9c957c 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -276,6 +276,30 @@ #reset-cells = <1>; }; + l2cc: clock-controller@2011000 { + compatible = "syscon"; + reg = <0x2011000 0x1000>; + }; + + rpm@108000 { + compatible = "qcom,rpm-apq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = , + , + ; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; + }; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; -- cgit v1.2.3 From ad560450d3107940603fdc73ac86b73fe04894cd Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:43:14 +0100 Subject: ARM: dts: qcom: apq8064-ifc6410 - Add basic regulators This patch adds support to basic regulators wiredup on IFC6410 board. All these regulators are tested as part of USB, SATA and HDMI. Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 67 ++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index e641001ca2a7..ca2d7ba4e91a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -23,6 +23,73 @@ }; }; + rpm@108000 { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = ; -- cgit v1.2.3 From 223280b10ef13af2def3a5473a7386c4ba4e204f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:43:30 +0100 Subject: ARM: dts: qcom: apq8064 - Add usb host support. This patch adds device tree nodes to support two usb hosts on APQ8064 SOC. Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ++++++++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 47 ++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index ca2d7ba4e91a..8fe60fcd6203 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -116,6 +116,28 @@ }; }; + usb3_phy: phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb4_phy: phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb3: usb@12520000 { + status = "okay"; + }; + + usb4: usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 19629c9c957c..99d8e0708c2a 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,6 +2,7 @@ #include "skeleton.dtsi" #include +#include #include #include #include @@ -300,6 +301,52 @@ }; }; + usb3_phy: phy@12520000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12520000 0x400>; + interrupts = ; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS3_XCVR_CLK>, + <&gcc USB_HS3_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS3_RESET>; + reset-names = "link"; + }; + + usb4_phy: phy@12530000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12530000 0x400>; + interrupts = ; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS4_XCVR_CLK>, + <&gcc USB_HS4_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS4_RESET>; + reset-names = "link"; + }; + + usb3: usb@12520000 { + compatible = "qcom,ehci-host"; + reg = <0x12520000 0x400>; + interrupts = ; + status = "disabled"; + usb-phy = <&usb3_phy>; + }; + + usb4: usb@12530000 { + compatible = "qcom,ehci-host"; + reg = <0x12530000 0x400>; + interrupts = ; + status = "disabled"; + usb-phy = <&usb4_phy>; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; -- cgit v1.2.3 From ea986611dca33de16519d3cd84d8e151cfc723cf Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:43:42 +0100 Subject: ARM: dts: qcom: apq8064 - Add USB OTG support This patch adds USB OTG support on USB1 of APQ8064 SOC. Tested on IFC6410 with ethernet gadget. Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 17 ++++++++++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 32 ++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 8fe60fcd6203..122bf34d752e 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -116,6 +116,14 @@ }; }; + /* OTG */ + usb1_phy: phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + usb3_phy: phy@12520000 { status = "okay"; vddcx-supply = <&pm8921_s3>; @@ -130,6 +138,15 @@ v1p8-supply = <&pm8921_l23>; }; + gadget1: gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "okay"; + }; + usb3: usb@12520000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 99d8e0708c2a..5aac9a58b02b 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -301,6 +301,21 @@ }; }; + usb1_phy: phy@12500000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12500000 0x400>; + interrupts = ; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS1_XCVR_CLK>, + <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS1_RESET>; + reset-names = "link"; + }; + usb3_phy: phy@12520000 { compatible = "qcom,usb-otg-ci"; reg = <0x12520000 0x400>; @@ -331,6 +346,23 @@ reset-names = "link"; }; + gadget1: gadget@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x400>; + status = "disabled"; + dr_mode = "peripheral"; + interrupts = ; + usb-phy = <&usb1_phy>; + }; + + usb1: usb@12500000 { + compatible = "qcom,ehci-host"; + reg = <0x12500000 0x400>; + interrupts = ; + status = "disabled"; + usb-phy = <&usb1_phy>; + }; + usb3: usb@12520000 { compatible = "qcom,ehci-host"; reg = <0x12520000 0x400>; -- cgit v1.2.3 From e629335f6c8d9a6a0784e0a305c3c74d910b6e4d Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:43:56 +0100 Subject: ARM: dts: qcom: apq8064 - Add SATA controller support This patch adds AHCI based SATA controller support to APQ8064. Tested on IFC6410 board. Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 9 ++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 35 ++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 122bf34d752e..3d96cb85e2a2 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -116,6 +116,15 @@ }; }; + sata_phy0: phy@1b400000 { + status = "okay"; + }; + + sata0: sata@29000000 { + status = "okay"; + target-supply = <&pm8921_s4>; + }; + /* OTG */ usb1_phy: phy@12500000 { status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 5aac9a58b02b..1f900c755482 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -379,6 +379,41 @@ usb-phy = <&usb4_phy>; }; + sata_phy0: phy@1b400000 { + compatible = "qcom,apq8064-sata-phy"; + status = "disabled"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; + }; + + sata0: sata@29000000 { + compatible = "generic-ahci"; + status = "disabled"; + reg = <0x29000000 0x180>; + interrupts = ; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", + "iface", + "bus", + "rxoob", + "core_pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; -- cgit v1.2.3 From 1a621d3568a8f797f9aa082c2f8007fb6fffe016 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:44:05 +0100 Subject: ARM: dts: qcom: apq8064-cm-qs600 - Add basic regulators This patch adds basic regulator support for USB and HDMI. Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 61 +++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 5d75666f7f6c..142885d86d59 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -14,6 +14,67 @@ }; }; + rpm@108000 { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = ; -- cgit v1.2.3 From 84db78b8ac5db9023ad3b1177a61994fecf40824 Mon Sep 17 00:00:00 2001 From: Nicolas Dechesne Date: Fri, 10 Apr 2015 21:44:15 +0100 Subject: ARM: dts: qcom: apq8064 - Add usb host support to CM QS-600 This patch adds device tree nodes to support two usb hosts on Compulab QS600 board. Signed-off-by: Srinivas Kandagatla [Srinivas Kandagatla: fixed up regulators and status properties] Signed-off-by: Nicolas Dechesne Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 142885d86d59..4eedfe445e3e 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -101,6 +101,28 @@ }; }; + usb3_phy: phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb4_phy: phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb3: usb@12520000 { + status = "okay"; + }; + + usb4: usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { -- cgit v1.2.3 From 08372ce9d780cce9cc4380d3639ec28752d44425 Mon Sep 17 00:00:00 2001 From: Nicolas Dechesne Date: Fri, 10 Apr 2015 21:44:23 +0100 Subject: ARM: dts: qcom: apq8064 - Add USB OTG support for CM QS-600 This patch adds USB OTG support on USB1 for Compulab QS-600 Board. Signed-off-by: Srinivas Kandagatla [Srinivas Kandagatla: fixed up regulators and status properties] Signed-off-by: Nicolas Dechesne Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 4eedfe445e3e..71512b3ca444 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -101,6 +101,14 @@ }; }; + /* OTG */ + usb1_phy: phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + usb3_phy: phy@12520000 { status = "okay"; vddcx-supply = <&pm8921_s3>; @@ -115,6 +123,15 @@ v1p8-supply = <&pm8921_l23>; }; + gadget1: gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + usb3: usb@12520000 { status = "okay"; }; -- cgit v1.2.3 From d5d4654e9eee81aafae7a4c0aa393d5f1a0882d1 Mon Sep 17 00:00:00 2001 From: Pramod Gurav Date: Fri, 10 Apr 2015 21:44:31 +0100 Subject: ARM: dts: qcom: apq8064-ifc6410 - Add DT alias for serial port Define an alias for serial port present on ifc6410 which is used as console. Signed-off-by: Pramod Gurav Signed-off-by: Srinivas Kandagatla [Srinivas Kandagatla: renamed the serial0 label appropriately] Reviewed-by: Bjorn Andersson Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 4 ++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +-- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 3d96cb85e2a2..528cb314236e 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -5,6 +5,10 @@ model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + aliases { + serial0 = &gsbi7_serial; + }; + soc { pinctrl@800000 { i2c1_pins: i2c1 { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 1f900c755482..93de48ac0aa5 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -236,10 +236,9 @@ #address-cells = <1>; #size-cells = <1>; ranges; - syscon-tcsr = <&tcsr>; - serial@16640000 { + gsbi7_serial: serial@16640000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; -- cgit v1.2.3 From bc0d3076635cc6c7b4c715f676ed1526eed0399d Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:44:40 +0100 Subject: ARM: dts: qcom: apq8064 - Move i2c1 pinctrl to apq8064.dtsi I2C1 pinctrl is not really specific to a board, moving to SOC dtsi would avoid redefining this in every board. Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 7 ------- arch/arm/boot/dts/qcom-apq8064.dtsi | 7 +++++++ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 528cb314236e..f97339abbfaa 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -11,13 +11,6 @@ soc { pinctrl@800000 { - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - card_detect: card_detect { mux { pins = "gpio26"; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 93de48ac0aa5..345ea081c765 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -113,6 +113,13 @@ function = "ps_hold"; }; }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; }; intc: interrupt-controller@2000000 { -- cgit v1.2.3 From 3f62b46be1f7f1fc88401e97e0bbe55ca9d3964a Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 10 Apr 2015 21:44:48 +0100 Subject: ARM: dts: qcom: apq8064 - add i2c3 node for panel. This patch adds i2c3 node which is used for panel control on IFC6410. Signed-off-by: Srinivas Kandagatla Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 10 ++++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 27 +++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f97339abbfaa..a7c939ba8873 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -87,6 +87,16 @@ }; }; + gsbi3: gsbi@16200000 { + status = "okay"; + qcom,mode = ; + i2c3: i2c@16280000 { + status = "okay"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = ; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 345ea081c765..df2061ec630d 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -120,6 +120,13 @@ function = "gsbi1"; }; }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + }; + }; }; intc: interrupt-controller@2000000 { @@ -233,6 +240,26 @@ }; }; + gsbi3: gsbi@16200000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c3: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI3_QUP_CLK>, + <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; -- cgit v1.2.3 From dab8134ca0723d7a6fd009a4af6b602f861eb66a Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 20 Apr 2015 10:45:35 +0300 Subject: ARM: dts: qcom: Add PM8841 functions device nodes Add configuration nodes for multi purpose pins and thermal sensor devices. Thermal sensor will report PMIC die temperature. Signed-off-by: Ivan T. Ivanov Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-pm8841.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 73813cc118f9..8f1a0b162017 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -1,3 +1,4 @@ +#include #include &spmi_bus { @@ -7,6 +8,23 @@ reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8841_mpps: mpps@a000 { + compatible = "qcom,pm8841-mpp"; + reg = <0xa000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, + <4 0xa1 0 IRQ_TYPE_NONE>, + <4 0xa2 0 IRQ_TYPE_NONE>, + <4 0xa3 0 IRQ_TYPE_NONE>; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + }; }; usid5: pm8841@5 { -- cgit v1.2.3 From 635ecad7553b48a80777d8740e7387808d494a92 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 20 Apr 2015 10:45:36 +0300 Subject: ARM: dts: qcom: Add PM8941 functions device nodes Add configuration nodes for following devices: * GPIO block, with 36 pins * MPP block, with 8 pins * Current ADC (IADC) * Volatage ADC (VADC), with multiple inputs * Thermal sensor device, which is using on chip VADC channel report PMIC die temperature * Power key device, which is responsible for clean system reboot or shutdown * White LED device * RTC device Signed-off-by: Ivan T. Ivanov Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-pm8941.dtsi | 133 ++++++++++++++++++++++++++++++++++++- 1 file changed, 132 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 24c5088acea2..aa774e685018 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -1,3 +1,5 @@ +#include +#include #include &spmi_bus { @@ -7,12 +9,141 @@ reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x100>, + <0x6100 0x100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800 0x100>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8941_gpios: gpios@c000 { + compatible = "qcom,pm8941-gpio"; + reg = <0xc000 0x2400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>, + <0 0xd6 0 IRQ_TYPE_NONE>, + <0 0xd7 0 IRQ_TYPE_NONE>, + <0 0xd8 0 IRQ_TYPE_NONE>, + <0 0xd9 0 IRQ_TYPE_NONE>, + <0 0xda 0 IRQ_TYPE_NONE>, + <0 0xdb 0 IRQ_TYPE_NONE>, + <0 0xdc 0 IRQ_TYPE_NONE>, + <0 0xdd 0 IRQ_TYPE_NONE>, + <0 0xde 0 IRQ_TYPE_NONE>, + <0 0xdf 0 IRQ_TYPE_NONE>, + <0 0xe0 0 IRQ_TYPE_NONE>, + <0 0xe1 0 IRQ_TYPE_NONE>, + <0 0xe2 0 IRQ_TYPE_NONE>, + <0 0xe3 0 IRQ_TYPE_NONE>; + }; + + pm8941_mpps: mpps@a000 { + compatible = "qcom,pm8941-mpp"; + reg = <0xa000 0x800>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>, + <0 0xa6 0 IRQ_TYPE_NONE>, + <0 0xa7 0 IRQ_TYPE_NONE>; + }; + + pm8941_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8941_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8941_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + die_temp { + reg = ; + }; + ref_625mv { + reg = ; + }; + ref_1250v { + reg = ; + }; + ref_gnd { + reg = ; + }; + ref_vdd { + reg = ; + }; + }; + + pm8941_iadc: iadc@3600 { + compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; + reg = <0x3600 0x100>, + <0x12f1 0x1>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + qcom,external-resistor-micro-ohms = <10000>; + }; }; usid1: pm8941@1 { - compatible ="qcom,spmi-pmic"; + compatible = "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800 0x100>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + }; }; }; -- cgit v1.2.3 From 893475283dc9e2e344ff71912babdf714fc56777 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 20 Apr 2015 10:45:37 +0300 Subject: ARM: dts: qcom: Add PMA8084 functions device nodes Add configuration nodes for following devices: * GPIO block, with 22 pins * MPP block, with 8 pins * Volatage ADC (VADC), with multiple inputs * Thermal sensor device, which is using on chip VADC channel report PMIC die temperature. * RTC device Signed-off-by: Ivan T. Ivanov Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-pma8084.dtsi | 92 +++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index a5a4fe695a46..5e240ccc08b7 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -1,3 +1,5 @@ +#include +#include #include &spmi_bus { @@ -7,6 +9,96 @@ reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x100>, + <0x6100 0x100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pma8084_gpios: gpios@c000 { + compatible = "qcom,pma8084-gpio"; + reg = <0xc000 0x1600>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>; + }; + + pma8084_mpps: mpps@a000 { + compatible = "qcom,pma8084-mpp"; + reg = <0xa000 0x800>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>, + <0 0xa6 0 IRQ_TYPE_NONE>, + <0 0xa7 0 IRQ_TYPE_NONE>; + }; + + pma8084_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + io-channels = <&pma8084_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + }; + + pma8084_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + io-channel-ranges; + + die_temp { + reg = ; + }; + ref_625mv { + reg = ; + }; + ref_1250v { + reg = ; + }; + ref_buf_625mv { + reg = ; + }; + ref_gnd { + reg = ; + }; + ref_vdd { + reg = ; + }; + }; }; usid1: pma8084@1 { -- cgit v1.2.3 From b73b31577f70a1d03aee21d0127da44862b7b08e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 10 Feb 2015 17:06:03 -0800 Subject: ARM: dts: qcom: Add msm8660 PMU node Enable perf events on msm8660 devices by adding the pmu node. Signed-off-by: Stephen Boyd Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-msm8660.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 20bbd19b996e..e0b2ce2910e0 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -37,6 +37,11 @@ }; }; + cpu-pmu { + compatible = "qcom,scorpion-mp-pmu"; + interrupts = <1 9 0x304>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 50663822618670a1e6ea1dd9912790fd7ed3be0b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 27 Apr 2015 15:55:23 +0200 Subject: ARM: shmobile: r8a7740 dtsi: Fix SCIFB naming The single SCIFB on R-Mobile A1 is called "scifb", not "scifb8". Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 83c1c3ca1b8f..413590d6c316 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -275,7 +275,7 @@ status = "disabled"; }; - scifb8: serial@e6c30000 { + scifb: serial@e6c30000 { compatible = "renesas,scifb-r8a7740", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From dfaac7b7e4015ca2e690c7ea4421aec1405de966 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 27 Apr 2015 15:55:24 +0200 Subject: ARM: shmobile: sh73a0 dtsi: Fix SCIFB naming The single SCIFB on SH-Mobile AG5 is called "scifb", not "scifb8". Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 45b539ce4d35..cde61b463b6a 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -376,7 +376,7 @@ status = "disabled"; }; - scifb8: serial@e6c30000 { + scifb: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From 1f048b70b8e4761eb0579c0d668eeb4a3549bfa1 Mon Sep 17 00:00:00 2001 From: Lina Iyer Date: Thu, 9 Apr 2015 13:20:42 -0600 Subject: ARM: config: Update qcom_defconfig to enable cpuidle Update qcom_defconfig to allow cpuidle for QCOM cpus. * Enable QCOM_PM * Enable ARM_CPUIDLE Cc: Kumar Gala Signed-off-by: Lina Iyer Signed-off-by: Kumar Gala --- arch/arm/configs/qcom_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index d2f2babfd47a..e6a6f282e3de 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -30,6 +30,7 @@ CONFIG_CLEANCACHE=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -143,6 +144,7 @@ CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_MSM_IOMMU=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y -- cgit v1.2.3 From e3db12b94ed4e70b7f8703a0c7396d6b9028b58a Mon Sep 17 00:00:00 2001 From: Lina Iyer Date: Thu, 9 Apr 2015 13:20:43 -0600 Subject: ARM: config: multi_v7: Update to enable cpuidle for QCOM SoCs Update defconfig to allow cpuidle for QCOM cpus. * Enable QCOM_PM * Enable ARM_CPUIDLE Cc: Kumar Gala Signed-off-by: Lina Iyer Signed-off-by: Kumar Gala --- arch/arm/configs/multi_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ab86655c1f4b..d11e4050334a 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -112,6 +112,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y CONFIG_NEON=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_NET=y @@ -534,6 +535,7 @@ CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y CONFIG_COMMON_CLK_QCOM=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_APQ_MMCC_8084=y -- cgit v1.2.3 From 2c53c272d0d8757e506b16b3c291c5ec193c8ef5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 22 Jan 2015 11:07:00 +0100 Subject: ARM: sti: Provide DT nodes for SSC[0..4] The Synchronous Serial Controller is used to provide SPI. Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 54 +++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index c06a54681912..9eba0dc59b42 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -336,5 +336,59 @@ resets = <&softreset STIH407_MIPHY2_SOFTRESET>; }; }; + + spi@9840000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9840000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + pinctrl-0 = <&pinctrl_spi0_default>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi@9841000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9841000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9842000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9842000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9843000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9843000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9844000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9844000 0x110>; + interrupts = ; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; }; }; -- cgit v1.2.3 From b0bb2bae194f17cdc8d455c1d4503bc3bf733897 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 22 Jan 2015 11:07:00 +0100 Subject: ARM: sti: Provide DT nodes for SBC SSC[0..2] The Synchronous Serial Controller is used to provide SPI. These are the ports which are located on the Stand-By Controller (SBC). Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 9eba0dc59b42..655f8544a673 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -390,5 +390,36 @@ status = "disabled"; }; + + /* SBC SSC */ + spi@9540000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9540000 0x110>; + interrupts = ; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9541000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9541000 0x110>; + interrupts = ; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9542000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9542000 0x110>; + interrupts = ; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; }; }; -- cgit v1.2.3 From 94a3e0c4559d22acf05495dc1c4f82d26d5f07d1 Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Tue, 28 Apr 2015 20:01:06 +0200 Subject: ARM: sun7i: dt: Add new MK808C device The MK808C is an A20 based android stick, with 1G RAM, 8G NAND flash, a RTL8723au wifi + bt combo chip, a USB host ports using USB-A receptacles, a mini USB-B receptacle for USB OTG, mini HDMI and a TRS connector for AV. This patch adds basic support for the device, more information can be found here (http://linux-sunxi.org/MK808C). Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-mk808c.dts | 148 +++++++++++++++++++++++++++++++++ 2 files changed, 149 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-mk808c.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 83a4e685b0a5..31e1f416b869 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -560,6 +560,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ + sun7i-a20-mk808c.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts new file mode 100644 index 000000000000..4f432f8ade77 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -0,0 +1,148 @@ +/* + * Copyright 2015 Marcus Cooper + * + * Marcus Cooper + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "mk808c"; + compatible = "allwinner,mk808c", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3 From d8b183479cd007f7ac5297c7bc4108985b026e56 Mon Sep 17 00:00:00 2001 From: Gaël PORTAY Date: Thu, 30 Apr 2015 09:33:32 +0200 Subject: ARM: at91/dt: kizbox: rename to at91-kizbox MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rename to match AT91 naming convention. Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/at91-kizbox.dts | 150 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/kizbox.dts | 150 -------------------------------------- 3 files changed, 151 insertions(+), 151 deletions(-) create mode 100644 arch/arm/boot/dts/at91-kizbox.dts delete mode 100644 arch/arm/boot/dts/kizbox.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 86217db2937a..640c913924cc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -20,9 +20,9 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ tny_a9263.dtb \ usb_a9263.dtb \ at91-foxg20.dtb \ + at91-kizbox.dtb \ at91sam9g20ek.dtb \ at91sam9g20ek_2mmc.dtb \ - kizbox.dtb \ tny_a9g20.dtb \ usb_a9g20.dtb \ usb_a9g20_lpw.dtb \ diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts new file mode 100644 index 000000000000..e07afaefcf76 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -0,0 +1,150 @@ +/* + * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board + * + * Copyright (C) 2012 Boris BREZILLON + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + + model = "Overkiz kizbox"; + compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root"; + }; + + memory { + reg = <0x20000000 0x2000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; + status = "okay"; + }; + + watchdog@fffffd40 { + timeout-sec = <15>; + atmel,max-heartbeat-sec = <16>; + atmel,min-heartbeat-sec = <0>; + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + status = "okay"; + + bootloaderkernel@0 { + label = "bootloader-kernel"; + reg = <0x0 0xc0000>; + }; + + ubi@c0000 { + label = "ubi"; + reg = <0xc0000 0x7f40000>; + }; + + }; + + usb0: ohci@00500000 { + num-ports = <1>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + + pcf8563@51 { + /* nxp pcf8563 rtc */ + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + }; + + leds { + compatible = "gpio-leds"; + + led1g { + label = "led1:green"; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led1r { + label = "led1:red"; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + led2g { + label = "led2:green"; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "on"; + }; + + led2r { + label = "led2:red"; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "reset"; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + + mode { + label = "mode"; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; + linux,code = <0x101>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts deleted file mode 100644 index e83e4f9310b8..000000000000 --- a/arch/arm/boot/dts/kizbox.dts +++ /dev/null @@ -1,150 +0,0 @@ -/* - * kizbox.dts - Device Tree file for Overkiz Kizbox board - * - * Copyright (C) 2012 Boris BREZILLON - * - * Licensed under GPLv2. - */ -/dts-v1/; -#include "at91sam9g20.dtsi" - -/ { - - model = "Overkiz kizbox"; - compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root"; - }; - - memory { - reg = <0x20000000 0x2000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@fffb0000 { - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; - status = "okay"; - }; - - watchdog@fffffd40 { - timeout-sec = <15>; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - status = "okay"; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - status = "okay"; - - bootloaderkernel@0 { - label = "bootloader-kernel"; - reg = <0x0 0xc0000>; - }; - - ubi@c0000 { - label = "ubi"; - reg = <0xc0000 0x7f40000>; - }; - - }; - - usb0: ohci@00500000 { - num-ports = <1>; - status = "okay"; - }; - }; - - i2c@0 { - status = "okay"; - - pcf8563@51 { - /* nxp pcf8563 rtc */ - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - }; - - leds { - compatible = "gpio-leds"; - - led1g { - label = "led1:green"; - gpios = <&pioB 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led1r { - label = "led1:red"; - gpios = <&pioB 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led2g { - label = "led2:green"; - gpios = <&pioB 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - default-state = "on"; - }; - - led2r { - label = "led2:red"; - gpios = <&pioB 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - reset { - label = "reset"; - gpios = <&pioB 30 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - gpio-key,wakeup; - }; - - mode { - label = "mode"; - gpios = <&pioB 31 GPIO_ACTIVE_LOW>; - linux,code = <0x101>; - gpio-key,wakeup; - }; - }; -}; -- cgit v1.2.3 From 49668b014db289b034463a810cc936a79a59f1c5 Mon Sep 17 00:00:00 2001 From: Gaël PORTAY Date: Thu, 30 Apr 2015 09:33:33 +0200 Subject: ARM: at91/dt: at91-kizbox: sanitize file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Consists in: * sorting nodes by address as possible or alphabetically, * adding myself as new maintainer and * update license. Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-kizbox.dts | 65 +++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 34 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index e07afaefcf76..00c86c1d0a01 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -1,16 +1,16 @@ /* * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board * - * Copyright (C) 2012 Boris BREZILLON + * Copyright (C) 2012-2014 Boris BREZILLON + * 2014-2015 Gaël PORTAY * - * Licensed under GPLv2. + * Licensed under GPLv2 or later. */ /dts-v1/; #include "at91sam9g20.dtsi" / { - - model = "Overkiz kizbox"; + model = "Overkiz Kizbox"; compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; chosen { @@ -38,10 +38,6 @@ ahb { apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - usart0: serial@fffb0000 { status = "okay"; }; @@ -57,6 +53,10 @@ status = "okay"; }; + dbgu: serial@fffff200 { + status = "okay"; + }; + watchdog@fffffd40 { timeout-sec = <15>; atmel,max-heartbeat-sec = <16>; @@ -65,6 +65,11 @@ }; }; + usb0: ohci@00500000 { + num-ports = <1>; + status = "okay"; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; @@ -79,24 +84,36 @@ label = "ubi"; reg = <0xc0000 0x7f40000>; }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + reset { + label = "reset"; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; }; - usb0: ohci@00500000 { - num-ports = <1>; - status = "okay"; + mode { + label = "mode"; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; + linux,code = <0x101>; + gpio-key,wakeup; }; }; i2c@0 { status = "okay"; - pcf8563@51 { - /* nxp pcf8563 rtc */ + rtc: pcf8563@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; - }; leds { @@ -127,24 +144,4 @@ linux,default-trigger = "none"; }; }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - reset { - label = "reset"; - gpios = <&pioB 30 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - gpio-key,wakeup; - }; - - mode { - label = "mode"; - gpios = <&pioB 31 GPIO_ACTIVE_LOW>; - linux,code = <0x101>; - gpio-key,wakeup; - }; - }; }; -- cgit v1.2.3 From e9942d1f99934fe6c5651e758baf311589fbc72d Mon Sep 17 00:00:00 2001 From: Gaël PORTAY Date: Thu, 30 Apr 2015 09:33:34 +0200 Subject: ARM: at91/dt: at91-kizbox: user proper serial uart MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit USART3 is the only serial UART accessible. Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-kizbox.dts | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 00c86c1d0a01..72d5de807826 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -38,14 +38,6 @@ ahb { apb { - usart0: serial@fffb0000 { - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - macb0: ethernet@fffc4000 { phy-mode = "mii"; pinctrl-0 = <&pinctrl_macb_rmii @@ -53,6 +45,10 @@ status = "okay"; }; + usart3: serial@fffd0000 { + status = "okay"; + }; + dbgu: serial@fffff200 { status = "okay"; }; -- cgit v1.2.3 From d1b063aba81320cabdb093739b54dd4b3c92d159 Mon Sep 17 00:00:00 2001 From: Gaël PORTAY Date: Thu, 30 Apr 2015 09:33:35 +0200 Subject: ARM: at91/dt: at91-kizbox: gpio-keys related changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This: * fixes active level of GPIO (active high) and * renames buttons: - reset (PB_RST), and - mode to user (PB_USER). Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-kizbox.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 72d5de807826..73e4559862d3 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -89,15 +89,15 @@ #size-cells = <0>; reset { - label = "reset"; - gpios = <&pioB 30 GPIO_ACTIVE_LOW>; + label = "PB_RST"; + gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; gpio-key,wakeup; }; - mode { - label = "mode"; - gpios = <&pioB 31 GPIO_ACTIVE_LOW>; + user { + label = "PB_USER"; + gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; gpio-key,wakeup; }; -- cgit v1.2.3 From 4a225bed2b6e45b146d508ceb55f1d7c813050c4 Mon Sep 17 00:00:00 2001 From: Gaël PORTAY Date: Thu, 30 Apr 2015 09:33:36 +0200 Subject: ARM: at91/dt: at91-kizbox: leds related changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This: * moves to pwm-leds using tcb-pwm driver and * renames leds to pwm::. Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-kizbox.dts | 53 +++++++++++++++++++++++++-------------- 1 file changed, 34 insertions(+), 19 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 73e4559862d3..b19f568824df 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91sam9g20.dtsi" +#include / { model = "Overkiz Kizbox"; @@ -112,32 +113,46 @@ }; }; - leds { - compatible = "gpio-leds"; + pwm_leds { + compatible = "pwm-leds"; - led1g { - label = "led1:green"; - gpios = <&pioB 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + network_green { + label = "pwm:green:network"; + pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; }; - led1r { - label = "led1:red"; - gpios = <&pioB 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + network_red { + label = "pwm:red:network"; + pwms = <&tcb_pwm 3 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; }; - led2g { - label = "led2:green"; - gpios = <&pioB 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - default-state = "on"; + user_green { + label = "pwm:green:user"; + pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; }; - led2r { - label = "led2:red"; - gpios = <&pioB 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + user_red { + label = "pwm:red:user"; + pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; }; }; + + tcb_pwm: pwm { + compatible = "atmel,tcb-pwm"; + #pwm-cells = <3>; + tc-block = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa0 + &pinctrl_tcb1_tioa1 + &pinctrl_tcb1_tioa2 + &pinctrl_tcb1_tiob0>; + }; }; -- cgit v1.2.3 From ea6858497c4332500669118faa9b79729c5f68a8 Mon Sep 17 00:00:00 2001 From: Gaël PORTAY Date: Thu, 30 Apr 2015 09:33:37 +0200 Subject: ARM: at91/dt: at91-kizbox: re-size nand partitions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Re-size NAND partitions since the bootstrap is able to read volumes from an UBI image. Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-kizbox.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index b19f568824df..e7391047f08e 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -72,14 +72,14 @@ nand-ecc-mode = "soft"; status = "okay"; - bootloaderkernel@0 { - label = "bootloader-kernel"; - reg = <0x0 0xc0000>; + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; }; - ubi@c0000 { + ubi@20000 { label = "ubi"; - reg = <0xc0000 0x7f40000>; + reg = <0x20000 0x7fe0000>; }; }; }; -- cgit v1.2.3 From 81104f6082d5a684d644932068ee3bbb969daf23 Mon Sep 17 00:00:00 2001 From: Gaël PORTAY Date: Thu, 30 Apr 2015 09:33:38 +0200 Subject: ARM: at91/dt: at91-kizbox: update chosen node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Simplify the bootargs since the platform is booting from an initramfs and set the kernel stdout path to DBGU. Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon Acked-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-kizbox.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index e7391047f08e..b567b5ff908f 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -15,7 +15,8 @@ compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; chosen { - bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root"; + bootargs = "ubi.mtd=ubi"; + linux,stdout-path = &dbgu; }; memory { -- cgit v1.2.3 From 9286ac4829ba66efa1c258411dfe51736cb3cfc0 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Fri, 10 Apr 2015 11:40:00 +0200 Subject: ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc. The nodes have been split to allow as much commonality as possible. The stih407 has a silicon bug with eMMC UHS modes (with top regs) and as such doesn't have any of the uhs dt properties. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 30 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/stih410-b2120.dts | 10 ++++++++++ arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 ++++++++ 3 files changed, 48 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 655f8544a673..11d5c70b8d80 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -421,5 +421,35 @@ status = "disabled"; }; + + mmc0: sdhci@09060000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09060000 0x7ff>, <0x9061008 0x20>; + reg-names = "mmc", "top-mmc-delay"; + interrupts = ; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + bus-width = <8>; + non-removable; + }; + + mmc1: sdhci@09080000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09080000 0x7ff>; + reg-names = "mmc"; + interrupts = ; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_1>; + resets = <&softreset STIH407_MMC1_SOFTRESET>; + bus-width = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 2f61a9960dee..16f02c5e33a4 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -26,4 +26,14 @@ aliases { ttyAS0 = &sbc_serial0; }; + + soc { + + mmc0: sdhci@09060000 { + max-frequency = <200000000>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; + }; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index c1d859092be7..64fa0b5a0f24 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -47,6 +47,14 @@ status = "okay"; }; + mmc0: sdhci@09060000 { + status = "okay"; + }; + + mmc1: sdhci@09080000 { + status = "okay"; + }; + /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { status = "okay"; -- cgit v1.2.3 From ba7f2728dd6f266a8b46def8eb7ede07a2ed2b00 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Fri, 10 Apr 2015 11:40:00 +0200 Subject: ARM: STi: DT: STiH418: Add dt nodes for sdhci and emmc. Add dt nodes to enable sdhci / eMMC for stih418-b2199 board. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih418-b2199.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 926235c08e4d..a2fdada5b4e5 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -74,5 +74,17 @@ st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; + + mmc1: sdhci@09080000 { + status = "okay"; + }; + + mmc0: sdhci@09060000 { + status = "okay"; + max-frequency = <200000000>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; }; }; -- cgit v1.2.3 From 1b344b9669930ec36b86b639ee71bb6bf3ba425a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Apr 2015 16:47:00 +0200 Subject: ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ab86655c1f4b..8a566fd8f7b9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -334,6 +334,7 @@ CONFIG_WATCHDOG=y CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MESON_WATCHDOG=y CONFIG_MFD_AS3711=y -- cgit v1.2.3 From cb6a7a9e00fda1d51880ac0e93ad54a87034e822 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Apr 2015 16:47:00 +0200 Subject: ARM: multi_v7_defconfig: Enable support for ST's LPC RTC Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 8a566fd8f7b9..a841847f9c6e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -500,6 +500,7 @@ CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y -- cgit v1.2.3 From 358764f306242bf2b3d71693b04b05e0b75718ae Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Apr 2015 16:47:00 +0200 Subject: ARM: STi: DT: STiH407: Add Device Tree node for the LPC On current ST platforms the LPC controls a number of functions. This patch enables support for the LPC Watchdog and LPC RTC devices on LPC1 and LPC2 respectively. Signed-off-by: David Paris Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 11d5c70b8d80..cdee4a7799b4 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -7,6 +7,7 @@ * publishhed by the Free Software Foundation. */ #include "stih407-pinctrl.dtsi" +#include #include / { #address-cells = <1>; @@ -451,5 +452,24 @@ resets = <&softreset STIH407_MMC1_SOFTRESET>; bus-width = <4>; }; + + /* Watchdog and Real-Time Clock */ + lpc@8787000 { + compatible = "st,stih407-lpc"; + reg = <0x8787000 0x1000>; + interrupts = ; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + timeout-sec = <120>; + st,syscfg = <&syscfg_core>; + st,lpc-mode = ; + }; + + lpc@8788000 { + compatible = "st,stih407-lpc"; + reg = <0x8788000 0x1000>; + interrupts = ; + clocks = <&clk_s_d3_flexgen CLK_LPC_1>; + st,lpc-mode = ; + }; }; }; -- cgit v1.2.3 From d90accb913a7a72172ec6b82f8b8766d9c9bf8bf Mon Sep 17 00:00:00 2001 From: Karim BEN BELGACEM Date: Wed, 18 Mar 2015 18:21:00 +0100 Subject: ARM: STi: DT: STiH407: Fix retime pin mask for PIO5 and PIO35 This will avoid programming the retime registers when not implemented - PIO5 : no retime registers assigned to pins 6 and 7 - PIO35 : pin 7 is reserved so no retime register assigned to it Signed-off-by: Karim BEN BELGACEM Acked-by: Maxime Coquelin Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 402844cb3152..0a754f275212 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -104,6 +104,7 @@ #interrupt-cells = <2>; reg = <0x5000 0x100>; st,bank-name = "PIO5"; + st,retime-pin-mask = <0x3f>; }; rc { @@ -519,6 +520,7 @@ #interrupt-cells = <2>; reg = <0x5000 0x100>; st,bank-name = "PIO35"; + st,retime-pin-mask = <0x7f>; }; i2c4 { -- cgit v1.2.3 From b3d37f92a79a329c392712da5e71fdd6c0258c3a Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Tue, 31 Mar 2015 09:35:00 +0200 Subject: ARM: DT: STi: STiH407: Add sata DT nodes. Now that the miphy28lp is upstream, we can add the sata dt nodes for stih407 family silicon. This has been tested on b2120 board J4 (sata0 channel). These nodes are disabled by default as a special mini pci-e to sata daughter board is required which isn't shipped with the board. Signed-off-by: Peter Griffin Acked-by: Lee Jones Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 45 +++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index cdee4a7799b4..85159b823867 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -8,6 +8,7 @@ */ #include "stih407-pinctrl.dtsi" #include +#include #include / { #address-cells = <1>; @@ -471,5 +472,49 @@ clocks = <&clk_s_d3_flexgen CLK_LPC_1>; st,lpc-mode = ; }; + + sata0: sata@9b20000 { + compatible = "st,ahci"; + reg = <0x9b20000 0x1000>; + + interrupts = ; + interrupt-names = "hostc"; + + phys = <&phy_port0 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + + resets = <&powerdown STIH407_SATA0_POWERDOWN>, + <&softreset STIH407_SATA0_SOFTRESET>, + <&softreset STIH407_SATA0_PWR_SOFTRESET>; + reset-names = "pwr-dwn", "sw-rst", "pwr-rst"; + + clock-names = "ahci_clk"; + clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + + status = "disabled"; + }; + + sata1: sata@9b28000 { + compatible = "st,ahci"; + reg = <0x9b28000 0x1000>; + + interrupts = ; + interrupt-names = "hostc"; + + phys = <&phy_port1 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + + resets = <&powerdown STIH407_SATA1_POWERDOWN>, + <&softreset STIH407_SATA1_SOFTRESET>, + <&softreset STIH407_SATA1_PWR_SOFTRESET>; + reset-names = "pwr-dwn", + "sw-rst", + "pwr-rst"; + + clock-names = "ahci_clk"; + clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + + status = "disabled"; + }; }; }; -- cgit v1.2.3 From 90037558d5ed25a63499c3973cc1af25da02f673 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Apr 2015 14:08:03 +0200 Subject: ARM: shmobile: defconfig: Replace USB_RCAR_GEN2_PHY by PHY_RCAR_GEN2 The legacy-only USB_RCAR_GEN2_PHY driver was replaced by the DT-only PHY_RCAR_GEN2 driver. Refresh the defconfig using "make savedefconfig" while we're at it. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/configs/shmobile_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index b58618e2d13c..9961fbd633f8 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -121,7 +121,6 @@ CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_DA9063=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y @@ -160,7 +159,6 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_RCAR_PHY=y -CONFIG_USB_RCAR_GEN2_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y CONFIG_USB_ETH=y @@ -182,6 +180,8 @@ CONFIG_IIO=y CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_RENESAS_TPU=y +CONFIG_GENERIC_PHY=y +CONFIG_PHY_RCAR_GEN2=y # CONFIG_DNOTIFY is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -- cgit v1.2.3 From 469a22e6bad725cbd3188f37f2d119c7c7eaf510 Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Sat, 2 May 2015 13:36:20 +0200 Subject: ARM: sunxi: dts: split IR pins for A10 and A20 Currently none of the target boards nor the driver supports IR TX. However this pin is used in a few instances as a GPIO. Split the pin ctrl descriptions so that only the IR RX is configured to be used. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 2 +- arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +- arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 2 +- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 4 ++-- arch/arm/boot/dts/sun4i-a10.dtsi | 22 ++++++++++++++++++---- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 2 +- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 2 +- arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 2 +- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 2 +- arch/arm/boot/dts/sun7i-a20-m3.dts | 2 +- arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 2 +- arch/arm/boot/dts/sun7i-a20-orangepi.dts | 2 +- arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 2 +- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 2 +- arch/arm/boot/dts/sun7i-a20.dtsi | 22 ++++++++++++++++++---- 19 files changed, 54 insertions(+), 26 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index f03281434e59..57970d06527d 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -130,7 +130,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 1a3c7ddc538a..62e4b36b7364 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -96,7 +96,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 0ba67d79c2b4..db204b185d22 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -126,7 +126,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index f4437883fba7..835eb30c1421 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -93,7 +93,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 1b0452fea273..4281782fe913 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -126,7 +126,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 0f24914c1a6e..132ace5c9d18 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -92,11 +92,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; -&ir0_pins_a { +&ir0_rx_pins_a { /* The ir receiver is not always populated */ allwinner,pull = ; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 1d7fd68bea1d..752985779414 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -797,15 +797,29 @@ allwinner,pull = ; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; allwinner,function = "ir0"; allwinner,drive = ; allwinner,pull = ; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = ; allwinner,pull = ; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index b952ac445504..ecc2a4d045da 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -142,7 +142,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 9d9027f25a44..d408bbcbe917 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -154,7 +154,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 3c817ac9360b..930ea80d9bfd 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -133,7 +133,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 613a19e63e58..8a83c99cf976 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -160,7 +160,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index d3f15c2e721e..9a4d7836f6d2 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -160,7 +160,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 3f99b3f222a7..d9782c4e798d 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -157,7 +157,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index f2fb26e7d6e5..39b4a8023d2d 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -117,7 +117,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 0556938a5d4d..bf6dd25edddb 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -137,7 +137,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 7e6405c5448f..b282dda6f6aa 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -132,7 +132,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 810c5f764595..f14cd603fa86 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -125,7 +125,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index cd05267781fb..2578959bccaa 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -154,7 +154,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4163ade867cb..89d720660b80 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -1000,15 +1000,29 @@ allwinner,pull = ; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; allwinner,function = "ir0"; allwinner,drive = ; allwinner,pull = ; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = ; allwinner,pull = ; -- cgit v1.2.3 From cfb1167126613230f38f4c45b9e9bcb22791df8b Mon Sep 17 00:00:00 2001 From: Hongzhou Yang Date: Fri, 1 May 2015 14:49:30 +0800 Subject: ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135. Add pinctrl,GPIO and EINT node to mt8135.dtsi. Signed-off-by: Hongzhou Yang Acked-by: Linus Walleij Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8135-pinfunc.h | 1302 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/mt8135.dtsi | 29 + 2 files changed, 1331 insertions(+) create mode 100644 arch/arm/boot/dts/mt8135-pinfunc.h (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h new file mode 100644 index 000000000000..5a609875cb18 --- /dev/null +++ b/arch/arm/boot/dts/mt8135-pinfunc.h @@ -0,0 +1,1302 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Hongzhou.Yang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT8135_PINFUNC_H +#define __DTS_MT8135_PINFUNC_H + +#include + +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7) + +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7) + +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7) + +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7) + +#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7) + +#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7) + +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7) + +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7) + +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7) + +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6) + +#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1) +#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2) +#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7) + +#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1) +#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2) +#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6) +#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7) + +#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1) +#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2) +#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3) +#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7) + +#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1) +#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2) +#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3) +#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4) +#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6) +#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7) + +#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1) +#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2) +#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3) +#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4) +#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5) +#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6) +#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7) + +#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1) +#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2) +#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3) +#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4) +#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5) +#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7) + +#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1) +#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2) +#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3) +#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4) +#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5) +#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7) + +#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1) +#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2) +#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3) +#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4) +#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5) +#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6) +#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7) + +#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1) +#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2) +#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3) +#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4) +#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5) +#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6) +#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7) + +#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1) +#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2) +#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3) +#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4) +#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5) +#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6) +#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7) + +#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1) +#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2) +#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3) +#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4) +#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7) + +#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1) +#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2) +#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3) +#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4) +#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7) + +#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1) +#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2) +#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3) +#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4) +#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7) + +#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1) +#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2) +#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3) +#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4) +#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7) + +#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1) +#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2) +#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3) +#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4) +#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7) + +#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1) +#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2) +#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4) + +#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1) +#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2) +#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4) +#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5) + +#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1) +#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2) +#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4) +#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5) + +#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1) +#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2) +#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4) +#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5) + +#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1) +#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2) +#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3) +#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4) +#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5) + +#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1) +#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2) +#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3) +#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4) +#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5) + +#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1) +#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2) +#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3) +#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4) +#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5) + +#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1) +#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2) +#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3) +#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4) +#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5) + +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7) + +#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1) +#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2) + +#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1) +#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2) +#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3) +#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4) + +#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1) +#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2) + +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7) + +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7) + +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7) + +#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1) +#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2) +#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3) +#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5) +#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7) + +#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1) +#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2) +#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3) +#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5) +#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7) + +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7) + +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1) +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2) + +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1) +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2) + +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1) +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2) + +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1) +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2) + +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7) + +#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1) + +#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1) +#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2) + +#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1) +#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2) + +#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1) +#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2) + +#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1) +#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2) +#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3) +#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4) +#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5) +#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7) + +#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1) +#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2) +#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4) +#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5) +#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7) + +#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1) +#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2) +#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4) +#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5) +#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7) + +#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1) +#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2) +#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5) +#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7) + +#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1) +#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2) +#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5) +#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7) + +#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1) +#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2) +#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3) + +#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1) +#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2) +#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3) + +#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1) +#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2) +#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3) + +#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1) +#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2) +#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3) + +#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1) +#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2) +#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3) + +#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1) +#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2) +#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3) + +#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7) + +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7) + +#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7) + +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5) + +#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1) +#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2) +#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3) +#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6) +#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7) + +#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1) +#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2) +#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3) +#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6) +#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7) + +#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1) +#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2) +#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3) +#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6) +#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7) + +#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1) +#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2) +#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3) +#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6) +#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7) + +#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1) +#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2) +#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5) +#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6) +#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7) + +#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1) +#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2) +#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5) +#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6) +#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7) + +#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1) +#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2) +#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5) +#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6) +#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7) + +#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1) +#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2) +#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3) +#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4) +#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5) +#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6) +#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7) + +#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1) +#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2) +#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3) +#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4) +#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5) +#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6) +#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7) + +#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1) +#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2) +#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3) +#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4) +#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6) +#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7) + +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7) + +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7) + +#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7) + +#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7) + +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6) + +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6) + +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7) + +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7) + +#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7) + +#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7) + +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7) + +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7) + +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7) + +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7) + +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7) + +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7) + +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7) + +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7) + +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7) + +#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7) + +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7) + +#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7) + +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7) + +#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1) +#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2) +#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3) +#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4) +#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7) + +#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1) +#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2) +#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3) +#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4) +#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7) + +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7) + +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7) + +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7) + +#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1) +#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2) +#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3) +#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4) +#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5) +#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6) +#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7) + +#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1) +#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2) +#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3) +#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4) +#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5) +#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6) +#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7) + +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7) + +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7) + +#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1) +#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2) +#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3) +#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4) +#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5) +#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6) +#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7) + +#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1) +#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2) +#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3) +#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4) +#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5) +#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6) +#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7) + +#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1) +#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2) +#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3) +#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4) +#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5) +#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6) +#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7) + +#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1) +#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2) +#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3) +#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4) +#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5) +#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6) +#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7) + +#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1) +#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4) +#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5) +#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6) +#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7) + +#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1) +#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2) +#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5) +#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6) +#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7) + +#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1) +#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2) +#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5) +#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6) +#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7) + +#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1) +#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2) +#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7) + +#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1) +#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2) +#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3) +#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5) +#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7) + +#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1) +#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2) +#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3) +#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5) +#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6) +#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7) + +#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1) +#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5) +#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6) +#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7) + +#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1) +#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2) +#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5) +#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7) + +#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1) +#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2) +#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3) +#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4) +#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5) +#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6) + +#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1) +#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2) +#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3) +#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5) +#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6) + +#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1) +#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2) +#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4) +#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5) + +#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1) +#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2) +#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4) +#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5) + +#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1) +#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2) +#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4) + +#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1) +#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2) +#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5) + +#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1) +#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2) +#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3) +#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4) +#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5) + +#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1) +#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2) +#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3) +#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4) +#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5) +#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6) + +#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1) +#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2) +#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4) +#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5) + +#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1) +#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2) +#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3) +#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4) +#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5) + +#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1) +#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2) +#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3) +#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4) +#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5) + +#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1) +#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2) +#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3) +#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4) +#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5) + +#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1) +#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2) +#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3) +#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4) +#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5) + +#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1) +#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2) +#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3) +#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4) +#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5) + +#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1) +#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2) +#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3) +#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4) +#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5) + +#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1) +#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2) +#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3) +#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4) +#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5) + +#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1) +#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2) +#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5) + +#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1) +#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2) +#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5) + +#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1) +#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2) +#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5) + +#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1) +#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2) +#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4) + +#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1) +#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2) +#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4) + +#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1) +#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2) +#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4) + +#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1) +#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2) +#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4) + +#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1) +#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2) +#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4) + +#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1) +#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2) +#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4) + +#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1) +#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2) +#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4) + +#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1) +#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2) +#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4) + +#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1) +#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2) +#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4) + +#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2) + +#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2) + +#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2) + +#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2) + +#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2) + +#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2) + +#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2) + +#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2) + +#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2) + +#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2) + +#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2) + +#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2) + +#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2) + +#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2) + +#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2) + +#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2) + +#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) + +#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) + +#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) + +#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) + +#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1) +#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2) + +#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1) +#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2) + +#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1) +#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2) + +#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1) +#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2) + +#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1) +#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2) + +#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1) +#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2) + +#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1) +#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2) +#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3) + +#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1) +#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2) +#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3) + +#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1) +#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2) + +#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1) +#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2) + +#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1) +#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2) +#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3) + +#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1) +#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2) +#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3) + +#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1) +#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2) +#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3) +#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4) +#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5) +#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6) +#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7) + +#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1) +#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2) +#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5) +#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7) + +#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1) +#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2) +#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5) +#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7) + +#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1) +#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2) +#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5) +#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7) + +#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1) +#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2) +#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3) +#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6) +#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7) + +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7) + +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6) + +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7) + +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6) + +#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1) + +#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1) +#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2) +#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3) +#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5) +#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6) + +#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1) +#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2) +#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3) +#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5) +#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6) + +#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1) +#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2) +#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3) +#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4) +#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5) + +#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1) +#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2) +#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3) +#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4) +#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5) + +#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1) +#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2) +#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3) +#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4) +#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5) + +#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0) +#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1) +#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2) +#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3) +#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4) +#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5) + +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6) + +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6) + +#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6) + +#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5) + +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5) + +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5) + +#endif /* __DTS_MT8135_PINFUNC_H */ diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index a161e99ffcc4..0aba9eb28e2b 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -15,6 +15,7 @@ #include #include #include "skeleton64.dtsi" +#include "mt8135-pinfunc.h" / { compatible = "mediatek,mt8135"; @@ -101,6 +102,29 @@ compatible = "simple-bus"; ranges; + /* + * Pinctrl access register at 0x10005000 and 0x1020c000 through + * regmap. Register 0x1000b000 is used by EINT. + */ + pio: pinctrl@10005000 { + compatible = "mediatek,mt8135-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + ; + }; + + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + timer: timer@10008000 { compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer"; @@ -119,6 +143,11 @@ reg = <0 0x10200030 0 0x1c>; }; + syscfg_pctl_b: syscfg_pctl_b@1020c000 { + compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; + reg = <0 0x1020c000 0 0x1000>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; -- cgit v1.2.3 From 4d48edb3c3e1234d6b3fcdfb9ac24d7c6de449cb Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Thu, 15 Jan 2015 13:58:57 +0300 Subject: ARM: tegra20: Store CPU "resettable" status in IRAM Commit 7232398abc6a ("ARM: tegra: Convert PMC to a driver") changed tegra_resume() location storing from late to early and, as a result, broke suspend on Tegra20. PMC scratch register 41 is used by tegra LP1 resume code for retrieving stored physical memory address of common resume function and in the same time used by tegra20_cpu_shutdown() (shared by Tegra20 cpuidle driver and platform SMP code), which is storing CPU1 "resettable" status. It implies strict order of scratch register usage, otherwise resume function address is lost on Tegra20 after disabling non-boot CPU's on suspend. Fix it by storing "resettable" status in IRAM instead of PMC scratch register. Signed-off-by: Dmitry Osipenko Fixes: 7232398abc6a (ARM: tegra: Convert PMC to a driver) Cc: # v3.17+ Signed-off-by: Thierry Reding --- arch/arm/mach-tegra/cpuidle-tegra20.c | 5 ++--- arch/arm/mach-tegra/reset-handler.S | 10 +++++++--- arch/arm/mach-tegra/reset.h | 4 ++++ arch/arm/mach-tegra/sleep-tegra20.S | 37 ++++++++++++++++++++--------------- arch/arm/mach-tegra/sleep.h | 4 ++++ 5 files changed, 38 insertions(+), 22 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 88de2dce2e87..7469347b1749 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -34,6 +34,7 @@ #include "iomap.h" #include "irq.h" #include "pm.h" +#include "reset.h" #include "sleep.h" #ifdef CONFIG_PM_SLEEP @@ -70,15 +71,13 @@ static struct cpuidle_driver tegra_idle_driver = { #ifdef CONFIG_PM_SLEEP #ifdef CONFIG_SMP -static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); - static int tegra20_reset_sleeping_cpu_1(void) { int ret = 0; tegra_pen_lock(); - if (readl(pmc + PMC_SCRATCH41) == CPU_RESETTABLE) + if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE) tegra20_cpu_shutdown(1); else ret = -EINVAL; diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 71be4af5e975..e3070fdab80b 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -169,10 +169,10 @@ after_errata: cmp r6, #TEGRA20 bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r5, TEGRA_PMC_BASE - mov r0, #0 + mov32 r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + mov r0, #CPU_NOT_RESETTABLE cmp r10, #0 - strne r0, [r5, #PMC_SCRATCH41] + strneb r0, [r5, #__tegra20_cpu1_resettable_status_offset] 1: #endif @@ -281,6 +281,10 @@ __tegra_cpu_reset_handler_data: .rept TEGRA_RESET_DATA_SIZE .long 0 .endr + .globl __tegra20_cpu1_resettable_status_offset + .equ __tegra20_cpu1_resettable_status_offset, \ + . - __tegra_cpu_reset_handler_start + .byte 0 .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_end) diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index 76a93434c6ee..29c3dec0126a 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -35,6 +35,7 @@ extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE]; void __tegra_cpu_reset_handler_start(void); void __tegra_cpu_reset_handler(void); +void __tegra20_cpu1_resettable_status_offset(void); void __tegra_cpu_reset_handler_end(void); void tegra_secondary_startup(void); @@ -47,6 +48,9 @@ void tegra_secondary_startup(void); (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ (u32)__tegra_cpu_reset_handler_start))) +#define tegra20_cpu1_resettable_status \ + (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ + (u32)__tegra20_cpu1_resettable_status_offset)) #endif #define tegra_cpu_reset_handler_offset \ diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index be4bc5f853f5..e6b684e14322 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -97,9 +97,10 @@ ENDPROC(tegra20_hotplug_shutdown) ENTRY(tegra20_cpu_shutdown) cmp r0, #0 reteq lr @ must not be called for CPU 0 - mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT + ldr r2, =__tegra20_cpu1_resettable_status_offset mov r12, #CPU_RESETTABLE - str r12, [r1] + strb r12, [r1, r2] cpu_to_halt_reg r1, r0 ldr r3, =TEGRA_FLOW_CTRL_VIRT @@ -182,38 +183,41 @@ ENDPROC(tegra_pen_unlock) /* * tegra20_cpu_clear_resettable(void) * - * Called to clear the "resettable soon" flag in PMC_SCRATCH41 when + * Called to clear the "resettable soon" flag in IRAM variable when * it is expected that the secondary CPU will be idle soon. */ ENTRY(tegra20_cpu_clear_resettable) - mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT + ldr r2, =__tegra20_cpu1_resettable_status_offset mov r12, #CPU_NOT_RESETTABLE - str r12, [r1] + strb r12, [r1, r2] ret lr ENDPROC(tegra20_cpu_clear_resettable) /* * tegra20_cpu_set_resettable_soon(void) * - * Called to set the "resettable soon" flag in PMC_SCRATCH41 when + * Called to set the "resettable soon" flag in IRAM variable when * it is expected that the secondary CPU will be idle soon. */ ENTRY(tegra20_cpu_set_resettable_soon) - mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT + ldr r2, =__tegra20_cpu1_resettable_status_offset mov r12, #CPU_RESETTABLE_SOON - str r12, [r1] + strb r12, [r1, r2] ret lr ENDPROC(tegra20_cpu_set_resettable_soon) /* * tegra20_cpu_is_resettable_soon(void) * - * Returns true if the "resettable soon" flag in PMC_SCRATCH41 has been + * Returns true if the "resettable soon" flag in IRAM variable has been * set because it is expected that the secondary CPU will be idle soon. */ ENTRY(tegra20_cpu_is_resettable_soon) - mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 - ldr r12, [r1] + mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT + ldr r2, =__tegra20_cpu1_resettable_status_offset + ldrb r12, [r1, r2] cmp r12, #CPU_RESETTABLE_SOON moveq r0, #1 movne r0, #0 @@ -256,9 +260,10 @@ ENTRY(tegra20_sleep_cpu_secondary_finish) mov r0, #TEGRA_FLUSH_CACHE_LOUIS bl tegra_disable_clean_inv_dcache - mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT + ldr r4, =__tegra20_cpu1_resettable_status_offset mov r3, #CPU_RESETTABLE - str r3, [r0] + strb r3, [r0, r4] bl tegra_cpu_do_idle @@ -274,10 +279,10 @@ ENTRY(tegra20_sleep_cpu_secondary_finish) bl tegra_pen_lock - mov32 r3, TEGRA_PMC_VIRT - add r0, r3, #PMC_SCRATCH41 + mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT + ldr r4, =__tegra20_cpu1_resettable_status_offset mov r3, #CPU_NOT_RESETTABLE - str r3, [r0] + strb r3, [r0, r4] bl tegra_pen_unlock diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 92d46ec1361a..0d59360d891d 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -18,6 +18,7 @@ #define __MACH_TEGRA_SLEEP_H #include "iomap.h" +#include "irammap.h" #define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \ + IO_CPU_VIRT) @@ -29,6 +30,9 @@ + IO_APB_VIRT) #define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT) +#define TEGRA_IRAM_RESET_BASE_VIRT (IO_IRAM_VIRT + \ + TEGRA_IRAM_RESET_HANDLER_OFFSET) + /* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */ #define PMC_SCRATCH37 0x130 #define PMC_SCRATCH38 0x134 -- cgit v1.2.3 From 5431b0fdadfec7aa61c916d6978544727a00b5fe Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 29 Apr 2015 13:53:21 +0200 Subject: ARM: tegra: Use lower-case hexadecimal digits For consistency with other device tree content, use lower-case hexadecimal digits in register region specifications. Signed-off-by: Thierry Reding --- Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt | 2 +- arch/arm/boot/dts/tegra124.dtsi | 2 +- arch/arm/boot/dts/tegra20.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt index 23e1d3194174..41372d441131 100644 --- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt +++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt @@ -29,7 +29,7 @@ Example: fuse@7000f800 { compatible = "nvidia,tegra20-efuse"; - reg = <0x7000F800 0x400>, + reg = <0x7000f800 0x400>, <0x70000000 0x400>; clocks = <&tegra_car TEGRA20_CLK_FUSE>; clock-names = "fuse"; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index cf01c818b8ea..0d9f9ae73149 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -300,7 +300,7 @@ apbmisc@0,70000800 { compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ - <0x0 0x7000E864 0x0 0x04>; /* Strapping options */ + <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ }; pinmux: pinmux@0,70000868 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index adf6b048d0bb..f444b67f55c6 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -563,7 +563,7 @@ fuse@7000f800 { compatible = "nvidia,tegra20-efuse"; - reg = <0x7000F800 0x400>; + reg = <0x7000f800 0x400>; clocks = <&tegra_car TEGRA20_CLK_FUSE>; clock-names = "fuse"; resets = <&tegra_car 39>; -- cgit v1.2.3 From 85aa5047e369d963b88af3e817dd40e692175153 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 26 Feb 2015 11:21:58 +0100 Subject: ARM: tegra: Fix typo (reset -> rest) in comment Easy typo to make when you're working in this area of the code. Signed-off-by: Thierry Reding --- arch/arm/mach-tegra/sleep-tegra30.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 5d8d13aeab93..9a2f0b051e10 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -223,7 +223,7 @@ wfe_war: b __cpu_reset_again /* - * 38 nop's, which fills reset of wfe cache line and + * 38 nop's, which fills rest of wfe cache line and * 4 more cachelines with nop */ .rept 38 -- cgit v1.2.3 From 5780c20664db63033190c4d74c7f1ec2d13e91fe Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 18 Dec 2014 14:58:20 +0100 Subject: ARM: tegra: cardhu: Add power and volume keys The Cardhu has a power key on the top-right as well as volume up and volume down keys on the right side. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-cardhu.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index a1b682ea01bd..439634183e25 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -1,3 +1,4 @@ +#include #include "tegra30.dtsi" /** @@ -615,4 +616,31 @@ <&tegra_car TEGRA30_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + interrupt-parent = <&pmic>; + interrupts = <2 0>; + linux,code = ; + debounce-interval = <100>; + gpio-key,wakeup; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + }; + }; }; -- cgit v1.2.3 From 5264d2749fa3a52bc3adf3937c284590cf0b3ecf Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 24 Apr 2015 11:57:06 +0200 Subject: ARM: tegra: Add missing HDMI +5V regulator Commit fb50a116bbbc ("drm/tegra: hdmi - Add connector supply support") introduced a new supply for HDMI connectors that is used to control the voltage on the +5V pin. Not all boards have had the corresponding supply added to their device tree files, causing the following warning message during boot: [ 0.859698] 54280000.hdmi supply hdmi not found, using dummy regulator Add such a regulator to the Seaboard DTS to enable the driver to control this voltage and get rid of the warning. Reported-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20-seaboard.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e2fed2712249..aea8994b35f2 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -31,6 +31,7 @@ vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; + hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) @@ -893,6 +894,17 @@ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_hdmi: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { -- cgit v1.2.3 From 4c84472e3a4ddba063b09c695fde09b3260e67e1 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 22 May 2014 09:38:31 +0200 Subject: ARM: tegra: jetson-tk1: Enable HDA support The HDA controller can be used to play back audio via HDMI. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index ed8a8acd3d34..bd43ed6d6ec7 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1647,6 +1647,10 @@ target-12v-supply = <&vdd_12v0_sata>; }; + hda@0,70030000 { + status = "okay"; + }; + padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; -- cgit v1.2.3 From 7892158a96629c46c46dfae52eaf951f51222cf5 Mon Sep 17 00:00:00 2001 From: David Riley Date: Wed, 18 Mar 2015 10:52:25 +0100 Subject: soc/tegra: pmc: move to using a restart handler The pmc driver was previously exporting tegra_pmc_restart, which was assigned to machine_desc.init_machine, taking precedence over the restart handlers registered through register_restart_handler(). Signed-off-by: David Riley [tomeu.vizoso@collabora.com: Rebased] Signed-off-by: Tomeu Vizoso Acked-by: Stephen Warren Reviewed-by: Alexandre Courbot [treding@nvidia.com: minor cleanups] Signed-off-by: Thierry Reding --- arch/arm/mach-tegra/tegra.c | 1 - drivers/soc/tegra/pmc.c | 23 +++++++++++++++++------ include/soc/tegra/pmc.h | 2 -- 3 files changed, 17 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 861d88486dbe..2378fa560a21 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -163,6 +163,5 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .init_irq = tegra_dt_init_irq, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, - .restart = tegra_pmc_restart, .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index c956395cf46f..cc119d15dd16 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -377,13 +377,10 @@ int tegra_pmc_cpu_remove_clamping(int cpuid) } #endif /* CONFIG_SMP */ -/** - * tegra_pmc_restart() - reboot the system - * @mode: which mode to reboot in - * @cmd: reboot command - */ -void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) +static int tegra_pmc_restart_notify(struct notifier_block *this, + unsigned long action, void *data) { + const char *cmd = data; u32 value; value = tegra_pmc_readl(PMC_SCRATCH0); @@ -405,8 +402,15 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) value = tegra_pmc_readl(0); value |= 0x10; tegra_pmc_writel(value, 0); + + return NOTIFY_DONE; } +static struct notifier_block tegra_pmc_restart_handler = { + .notifier_call = tegra_pmc_restart_notify, + .priority = 128, +}; + static int powergate_show(struct seq_file *s, void *data) { unsigned int i; @@ -837,6 +841,13 @@ static int tegra_pmc_probe(struct platform_device *pdev) return err; } + err = register_restart_handler(&tegra_pmc_restart_handler); + if (err) { + dev_err(&pdev->dev, "unable to register restart handler, %d\n", + err); + return err; + } + return 0; } diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h index 65a93273e72f..f5c0de43a5fa 100644 --- a/include/soc/tegra/pmc.h +++ b/include/soc/tegra/pmc.h @@ -26,8 +26,6 @@ struct clk; struct reset_control; -void tegra_pmc_restart(enum reboot_mode mode, const char *cmd); - #ifdef CONFIG_PM_SLEEP enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode); -- cgit v1.2.3 From 11cd7b8c2773d01e4b40e38568ae62c471a2ea10 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 4 May 2015 10:48:07 -0700 Subject: ARM: OMAP2+: Remove legacy booting support for cm-t35 We've been moving all omap2+ based systems to boot in device tree only mode for a few years now. Only omap3 has legacy booting support remaining. Most omap3 boards already have related arch/arm/boot/*.dts* files for booting with device tree. This board has support for device tree based booting, and we've been printing warnings about the legacy booting being deprecated for a few merge cycles now. Let's attempt to remove the legacy booting for it. The reason for removing the legacy booting support now rather than later is we can simply revert this patch if necessary if we run into some unexpected issues that are not trivial to fix for the device tree based booting. Cc: Dmitry Lifshitz Cc: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 10 - arch/arm/mach-omap2/Makefile | 1 - arch/arm/mach-omap2/board-cm-t35.c | 769 ------------------------------------- 3 files changed, 780 deletions(-) delete mode 100644 arch/arm/mach-omap2/board-cm-t35.c (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 6468f15f060c..8b3aa4ca59a2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -240,16 +240,6 @@ config MACH_NOKIA_RX51 default y select OMAP_PACKAGE_CBB -config MACH_CM_T35 - bool "CompuLab CM-T35/CM-T3730 modules" - depends on ARCH_OMAP3 - default y - select MACH_CM_T3730 - select OMAP_PACKAGE_CUS - -config MACH_CM_T3730 - bool - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ec002bd4af77..ff634a1c26f5 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -252,7 +252,6 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o -obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c deleted file mode 100644 index b5dfbc1b1fc6..000000000000 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ /dev/null @@ -1,769 +0,0 @@ -/* - * CompuLab CM-T35/CM-T3730 modules support - * - * Copyright (C) 2009-2011 CompuLab, Ltd. - * Authors: Mike Rapoport - * Igor Grinberg - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include