From 24bd5d2cb93bc282e3c15e4d10fcd3210192f954 Mon Sep 17 00:00:00 2001 From: Harald Geyer Date: Sat, 9 Feb 2019 10:40:18 +0000 Subject: arm64: dts: allwinner: a64: teres-i: enable backlight Enable pwm and add a pretty standard backlight node. The regulator is always on, but we include it anyway, because it is required by the binding document. Signed-off-by: Harald Geyer Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 7b7b14ba58e6..0ec46b969a75 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -21,6 +21,15 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 0>; + power-supply = <®_dcdc1>; + brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>; + default-brightness-level = <5>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + }; + chosen { stdout-path = "serial0:115200n8"; @@ -131,6 +140,10 @@ status = "okay"; }; +&pwm { + status = "okay"; +}; + &r_rsb { status = "okay"; -- cgit v1.2.3 From ea738c324c7d80ef6267f91dc980ada902cf74f6 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 1 Mar 2019 22:40:51 +0530 Subject: arm64: dts: allwinner: a64-amarula-relic: Add STLM75 sensor Amarula A64 Relic has STLM75 sensor for digital temperature and thermal watchdog. Add support for it. Signed-off-by: Jagan Teki Signed-off-by: Maxime Ripard --- .../arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 6cb2b7f0c817..3575db216016 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -34,6 +34,21 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + }; +}; + +&i2c0_pins { + bias-pull-up; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; -- cgit v1.2.3 From 00f7980a3bd53d12abc34f68146a8eed0e894248 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 6 Mar 2019 22:31:10 +0530 Subject: arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support Oceanic 5205 5inMFD is a 5 inch Multi function display baseboard designed to mount SoPine SOM. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - SD Slot - SPI-NOR flash - EMAC, RTL8211E - MCP2515 CAN - 4-lane, MIPI-DSI panel - Goodix 911 CTP - USB Host - 12V DC power supply Signed-off-by: Jagan Teki Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../allwinner/sun50i-a64-oceanic-5205-5inmfd.dts | 68 ++++++++++++++++++++++ 2 files changed, 69 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 0b0917111099..e4dce2f6fa3a 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts new file mode 100644 index 000000000000..6a2154525d1e --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. + * Copyright (C) 2019 Amarula Solutions B.V. + * Author: Jagan Teki + */ + +/dts-v1/; + +#include "sun50i-a64-sopine.dtsi" + +/ { + model = "Oceanic 5205 5inMFD"; + compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dc1sw>; + allwinner,tx-delay-ps = <600>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +®_dc1sw { + regulator-name = "vcc-phy"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3 From a7f7047ffcee52fa5b8551a3be70fd5267be89a3 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 14 Mar 2019 21:16:25 +0100 Subject: arm64: dts: allwinner: a64: Add cross links for the mixers Unlike what the binding for multiple pipeline documents, the A64 doesn't have the cross links between the TCON and the mixers. Let's add them. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 33 ++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index e628d063931b..ccd143d82aea 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -251,11 +251,19 @@ #size-cells = <0>; mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer0_out_tcon0: endpoint { + mixer0_out_tcon0: endpoint@0 { + reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -276,7 +284,13 @@ mixer1_out: port@1 { reg = <1>; - mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -354,6 +368,11 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon1>; + }; }; tcon0_out: port@1 { @@ -379,9 +398,17 @@ #size-cells = <0>; tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; -- cgit v1.2.3 From 97df3aa76b4a384e29668f374a8b1034a31aa215 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 2 Mar 2019 13:10:30 +0000 Subject: arm64: dts: rockchip: Add capacity-dmips-mhz attributes to rk3399 The RK3399 has the interesting property to be a so called "big-little" system, where not all the CPUs are equal (the A53s are much weaker than the A72s). So far, we're not telling the OS that there is such a difference in processing capacity, and Linux assumes that they are equal. Too bad. Let's tell the OS about this by using the capacity-dmips-mhz property. The values used here are those used on the Juno platform, which is quite similar. This leads to the scheduler knowing that it can pack more tasks on the A72s, and leads to a better interactive experience. Tested-by: Robin Murphy Signed-off-by: Marc Zyngier Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index db9d948c0b03..0301e3e01b38 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -71,6 +71,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -82,6 +83,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -93,6 +95,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -104,6 +107,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -115,6 +119,7 @@ compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; @@ -126,6 +131,7 @@ compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; -- cgit v1.2.3 From 443f27e589819e3174336e613b8994ac9c7f9341 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Sat, 2 Mar 2019 16:37:09 +0000 Subject: arm64: dts: rockchip: enable HDMI CEC on rk3328 This patch enables HDMI CEC on RK3328 devices. (Unusual) source for the cec clock is taken from the vendor kernel. Signed-off-by: Jonas Karlman Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 84f14b132e8f..24911aad45c5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -657,9 +657,11 @@ interrupts = , ; clocks = <&cru PCLK_HDMI>, - <&cru SCLK_HDMI_SFC>; + <&cru SCLK_HDMI_SFC>, + <&cru SCLK_RTC32K>; clock-names = "iahb", - "isfr"; + "isfr", + "cec"; phys = <&hdmiphy>; phy-names = "hdmi"; pinctrl-names = "default"; -- cgit v1.2.3 From ad3c8cc359a25826173b05f30f3d828cc5759d94 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Sat, 2 Mar 2019 16:56:57 +0000 Subject: arm64: dts: rockchip: fix regulator name on rk3328-rock64 Update regulator-name to match node and schematics. Signed-off-by: Jonas Karlman Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 2157a528276b..8f3e4b7d55c9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -218,7 +218,7 @@ }; vcc_18: LDO_REG1 { - regulator-name = "vdd_18"; + regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -230,7 +230,7 @@ }; vcc18_emmc: LDO_REG2 { - regulator-name = "vcc_18emmc"; + regulator-name = "vcc18_emmc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; -- cgit v1.2.3 From 092430ea9d144bf34db2d1c8d27ad6d6f3d9505d Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Sat, 2 Mar 2019 17:00:25 +0000 Subject: arm64: dts: rockchip: add leds node on rk3328-rock64 Add led nodes on Rock64. Use heartbeat trigger for the red standby led and use mmc0 trigger for the white power led. Signed-off-by: Jonas Karlman Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 8f3e4b7d55c9..4c09322ae476 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -65,6 +65,20 @@ regulator-max-microvolt = <5000000>; }; + leds { + compatible = "gpio-leds"; + + power { + gpios = <&rk805 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + + standby { + gpios = <&rk805 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + sound { compatible = "audio-graph-card"; label = "rockchip,rk3328"; @@ -157,6 +171,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; -- cgit v1.2.3 From e31882e05ae58f733e0805338bbe317f5f95bb9f Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Sat, 2 Mar 2019 17:03:14 +0000 Subject: arm64: dts: rockchip: add ir-receiver node on rk3328-rock64 Add ir-receiver node to enable on-board IR on Rock64. Signed-off-by: Jonas Karlman Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 4c09322ae476..bb65f708318f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -65,6 +65,13 @@ regulator-max-microvolt = <5000000>; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + leds { compatible = "gpio-leds"; @@ -297,6 +304,12 @@ }; &pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; -- cgit v1.2.3 From 3e892ed20c08874be29767c854d8d13664ef1807 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Mon, 18 Feb 2019 02:34:06 +0900 Subject: arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 This patch adds #sound-dai-cells to use HDMI node as audio codec from device tree of rk3328 boards. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 24911aad45c5..35718f4041f0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -667,6 +667,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { -- cgit v1.2.3 From 3f0effd7490b23118f1b278f529ca45de27f4eb7 Mon Sep 17 00:00:00 2001 From: "Leonidas P. Papadakos" Date: Sun, 3 Mar 2019 01:18:33 +0200 Subject: arm64: dts: rockchip: give some life to the rk3328-roc-cc leds Assign the LEDs to heartbeat and sdcard io, as in other RK boards. https://github.com/armbian/build/commit/f1affad5c7be62d6e93832af3556c7609edd0858 Suggested-by: Juan Cano Signed-off-by: Leonidas P. Papadakos Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 33c44e857247..c3afe6a93e0f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -81,6 +81,26 @@ regulator-always-on; regulator-boot-on; }; + + leds { + compatible = "gpio-leds"; + + power { + label = "firefly:blue:power"; + linux,default-trigger = "heartbeat"; + gpios = <&rk805 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + mode = <0x23>; + }; + + user { + label = "firefly:yellow:user"; + linux,default-trigger = "mmc1"; + gpios = <&rk805 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + mode = <0x05>; + }; + }; }; &cpu0 { -- cgit v1.2.3 From f77e7a9aafe1e422b0646cfdac40d03f594eca5b Mon Sep 17 00:00:00 2001 From: "Leonidas P. Papadakos" Date: Fri, 1 Mar 2019 20:07:21 +0200 Subject: arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes In line with the rock64 dts, specify the cpu-supply for the other cpus as well Signed-off-by: Leonidas P. Papadakos Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index c3afe6a93e0f..53643ea4cfca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -107,6 +107,18 @@ cpu-supply = <&vdd_arm>; }; +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &emmc { bus-width = <8>; cap-mmc-highspeed; -- cgit v1.2.3 From 0f9e535a0884d341f6d72fe8f63e9bb34fd269d7 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 18 Feb 2019 07:05:55 -0300 Subject: arm64: dts: rockchip: enable mali on Rock Pi 4 Enable the mali gpu node. Signed-off-by: Ezequiel Garcia Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 4a543f2117d4..1e479d06e67e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -157,6 +157,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; -- cgit v1.2.3 From e38b144b82529d2e12ce815fab3d0bd6984a8d5f Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 18 Feb 2019 06:58:57 -0300 Subject: arm64: dts: rockchip: enable mali on rock960 boards Enable the mali gpu node. Signed-off-by: Ezequiel Garcia Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 2927db4dda9d..d1248065fe14 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -96,6 +96,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; -- cgit v1.2.3 From 08b64bd2c681ab8bd67fbf1d34d092d1bb72ede4 Mon Sep 17 00:00:00 2001 From: Alexis Ballier Date: Fri, 22 Feb 2019 19:44:19 +0100 Subject: arm64: dts: rockchip: Add support for the Orange Pi RK3399 board. This adds basic support for the Orange Pi RK3399 board. What works: - SD card / emmc. - Debug UART - Ethernet - USB: Type C, internal USB3 for SATA, 4 USB 2.0 ports - Sensors: All of them but the Hall sensor. - Buttons - Wifi, Bluetooth - HDMI out Signed-off-by: Alexis Ballier Reviewed-by: Rob Herring Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 771 +++++++++++++++++++++ 3 files changed, 777 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts (limited to 'arch/arm64') diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 061a03edf9c8..64b74b12dfea 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -308,6 +308,11 @@ properties: - const: netxeon,r89 - const: rockchip,rk3288 + - description: Orange Pi RK3399 board + items: + - const: rockchip,rk3399-orangepi + - const: rockchip,rk3399 + - description: Phytec phyCORE-RK3288 Rapid Development Kit items: - const: phytec,rk3288-pcm-947 diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1b28fa72ea0b..25454e2cf2de 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts new file mode 100644 index 000000000000..cf37b96a6b77 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -0,0 +1,771 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/input/input.h" +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Orange Pi RK3399 Board"; + compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-up { + label = "Volume Up"; + linux,code = ; + press-threshold-microvolt = <100000>; + }; + + button-down { + label = "Volume Down"; + linux,code = ; + press-threshold-microvolt = <300000>; + }; + + back { + label = "Back"; + linux,code = ; + press-threshold-microvolt = <985000>; + }; + + menu { + label = "Menu"; + linux,code = ; + press-threshold-microvolt = <1314000>; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = ; + linux,input-type = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_btn>; + wakeup-source; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_typec0: vcc5v0-typec0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec0_en>; + regulator-name = "vcc5v0_typec0"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_s3>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rtc_clko_soc", "rtc_clko_wifi"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_tp: LDO_REG2 { + regulator-name = "vcc3v0_tp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + ak09911@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + vdd-supply = <&vcc3v3_s3>; + }; + + mpu6500@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int_l>; + vddio-supply = <&vcc3v3_s3>; + }; + + lsm6ds3@6a { + compatible = "st,lsm6ds3"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&gyr_int_l>; + vdd-supply = <&vcc3v3_s3>; + vddio-supply = <&vcc3v3_s3>; + }; + + cm32181@10 { + compatible = "capella,cm32181"; + reg = <0x10>; + interrupt-parent = <&gpio4>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&light_int_l>; + vdd-supply = <&vcc3v3_s3>; + }; +}; + +&io_domains { + status = "okay"; + bt656-supply = <&vcc_3v0>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + buttons { + pwr_btn: pwr-btn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + ; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_typec0_en: vcc5v0-typec0-en { + rockchip,pins = + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + bluetooth { + bt_reg_on_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + mpu6500 { + gsensor_int_l: gsensor-int-l { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lsm6ds3 { + gyr_int_l: gyr-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cm32181 { + light_int_l: light-int-l { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + clock-frequency = <50000000>; + disable-wp; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = ; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + clock-frequency = <150000000>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc5v0_typec0>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; -- cgit v1.2.3 From a0dbc5c97f67db4d7ea66ee93a5e8a696a73823c Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Thu, 21 Feb 2019 00:12:26 +0900 Subject: arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64 The rockpro64 has hdmi support. So this patch enables hdmi audio feature that is defined in rk3399 devicetree. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 1f2394e0587d..791fb0ee9722 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -222,6 +222,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &gpu { mali-supply = <&vdd_gpu>; status = "okay"; -- cgit v1.2.3 From 092470b537f19788d957aed12d835a179b606014 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 8 Mar 2019 23:42:02 +0530 Subject: arm64: dts: rockchip: Add Nanopi NEO4 initial support FriendlyElec NanoPi NEO4 is known to be a revision 4 based NanoPi4 series of boards. Most of know peripherals are shared between Nanopi M4 vs NEO4, except - 1GB DDR3 - USB Host ports - Missing DSI port - USB 2.0 Host with USB2PHY0 (no USB2PH1) Add support for it, by reusing existing rk3399-nanopi4.dtsi Signed-off-by: Jagan Teki Signed-off-by: Akash Gajjar Reviewed-by: Rob Herring Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/arm/rockchip.yaml | 1 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts | 50 ++++++++++++++++++++++ 3 files changed, 52 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts (limited to 'arch/arm64') diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 64b74b12dfea..0161b4a66586 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -97,6 +97,7 @@ properties: - enum: - friendlyarm,nanopc-t4 - friendlyarm,nanopi-m4 + - friendlyarm,nanopi-neo4 - const: rockchip,rk3399 - description: GeekBuying GeekBox diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 25454e2cf2de..5f2687acbf94 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts new file mode 100644 index 000000000000..195410b089b9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Amarula Solutions B.V. + * Author: Jagan Teki + */ + +/dts-v1/; + +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyARM NanoPi NEO4"; + compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399"; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_core: vcc5v0-core { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; + + vcc5v0_usb1: vcc5v0-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_core>; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb1>; +}; + +&vbus_typec { + regulator-always-on; + vin-supply = <&vdd_5v>; +}; -- cgit v1.2.3 From 4d7f36d36f738fe8bcb06dfbab6b24e2e1ceff58 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 11 Mar 2019 20:33:30 +0530 Subject: arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960 It is always better practice to follow regulator naming conventions as per the schematics for future references. So, rename vcc_sys into vcc5v0_sys as per rk3399 power diagram of rock960 schematics. Signed-off-by: Jagan Teki Signed-off-by: Akash Gajjar Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 30 ++++++++++++------------ 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index d1248065fe14..1c13a70a7295 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -26,9 +26,9 @@ regulator-always-on; }; - vcc_sys: vcc-sys { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; + regulator-name = "vcc5v0_sys"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; @@ -40,7 +40,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; vcc3v3_pcie: vcc3v3-pcie-regulator { @@ -64,7 +64,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -128,7 +128,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; status = "okay"; regulator-state-mem { @@ -146,7 +146,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; @@ -164,16 +164,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_1v8>; -- cgit v1.2.3 From 16d79ec6e3e6a00007accfed9bd5caee7acf0e48 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 11 Mar 2019 20:33:31 +0530 Subject: arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus 12V DCIN regulator is root source supply for the rest of regulators in Rock960 power diagram. Add support for it and attach same to supply vcc5v0_sys. Signed-off-by: Jagan Teki Signed-off-by: Akash Gajjar Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 1c13a70a7295..5ba2aeca0fa8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -18,6 +18,15 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0"; @@ -32,6 +41,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; + vin-supply = <&vcc12v_dcin>; }; vcc3v3_sys: vcc3v3-sys { -- cgit v1.2.3 From f5639599de4c6343e8092300bd875b8dc0d76ffd Mon Sep 17 00:00:00 2001 From: Alexis Ballier Date: Fri, 15 Mar 2019 15:58:17 +0100 Subject: arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi Clock name was wrong, vbat & vddio supplies were missing. Signed-off-by: Alexis Ballier Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index cf37b96a6b77..6bc2e545f2fb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -707,12 +707,14 @@ bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk808 1>; - clock-names = "ext_clock"; + clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; }; }; -- cgit v1.2.3 From ba12fdd5108573b07894b1749a1859bee4f1b792 Mon Sep 17 00:00:00 2001 From: Alexis Ballier Date: Fri, 15 Mar 2019 15:58:19 +0100 Subject: arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911) Despite this not being mentioned in the binding documentation, this generates a log at boot about it being missing. Signed-off-by: Alexis Ballier Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 6bc2e545f2fb..96ccbe5c4f0c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -472,6 +472,7 @@ compatible = "asahi-kasei,ak09911"; reg = <0x0c>; vdd-supply = <&vcc3v3_s3>; + vid-supply = <&vcc3v3_s3>; }; mpu6500@68 { -- cgit v1.2.3 From 5e3f8027897c59e5c59918d544f1344527e43406 Mon Sep 17 00:00:00 2001 From: Alexis Ballier Date: Fri, 15 Mar 2019 15:58:21 +0100 Subject: arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi Also rename its regulator to match the schematic names. Signed-off-by: Alexis Ballier Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 26 +++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 96ccbe5c4f0c..2166be171df8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -136,13 +136,13 @@ vin-supply = <&vcc_sys>; }; - vcc5v0_typec0: vcc5v0-typec0-regulator { + vbus_typec: vbus-typec-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en>; - regulator-name = "vcc5v0_typec0"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vbus_typec"; vin-supply = <&vcc_sys>; }; @@ -505,6 +505,16 @@ pinctrl-0 = <&light_int_l>; vdd-supply = <&vcc3v3_s3>; }; + + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&chg_cc_int_l>; + vbus-supply = <&vbus_typec>; + }; }; &io_domains { @@ -547,7 +557,7 @@ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; - vcc5v0_typec0_en: vcc5v0-typec0-en { + vcc5v0_typec_en: vcc5v0-typec-en { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -596,6 +606,12 @@ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + fusb302 { + chg_cc_int_l: chg-cc-int-l { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pwm0 { @@ -677,7 +693,7 @@ status = "okay"; u2phy0_otg: otg-port { - phy-supply = <&vcc5v0_typec0>; + phy-supply = <&vbus_typec>; status = "okay"; }; -- cgit v1.2.3 From 980b52162871bcf08b7d6457ce3100012096451a Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 15 Mar 2019 01:05:53 +0000 Subject: arm64: dts: rockchip: Add PWM fan for NanoPC-T4 NanoPC-T4 has a dedicated circuit for driving a 12V fan from PWM1, so let's add that along with some rough empirically-derived thermal settings for the benefit of anyone determined enough to hook one up. The vendor does not currently offer a suitable fan, but this seems as good a place as any to note that pre-terminated 3-pin JST GH connectors are readily available online, and if you even have to ask, then splicing one of those really will be orders of magnitude cheaper and simpler than getting set up to crimp the teeny-tiny things by hand. Signed-off-by: Robin Murphy Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts | 67 +++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index 84433cf02be9..931c3dbf1b7d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -52,6 +52,73 @@ pinctrl-names = "default"; pinctrl-0 = <&ir_rx>; }; + + fan: pwm-fan { + compatible = "pwm-fan"; + /* + * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels + * work out to 0, ~1200, ~3000, and 5000RPM respectively. + */ + cooling-levels = <0 12 18 255>; + #cooling-cells = <2>; + fan-supply = <&vcc12v0_sys>; + pwms = <&pwm1 0 50000 0>; + }; +}; + +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&gpu_thermal { + trips { + gpu_warm: gpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + gpu_hot: gpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + cooling-maps { + map1 { + trip = <&gpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&gpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; }; &pinctrl { -- cgit v1.2.3 From 1a4e6203f0c870aab89eb6727759374fddb071aa Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 15 Mar 2019 01:05:30 +0000 Subject: arm64: dts: rockchip: Add nanopi4 ethernet phy The nanopi4 boards have the INTB pin of the RTL8211E phy wired up, so we can make use of that and avoid having to poll for line status changes. Apparently RTL8211E only requires 30ms of post-reset delay, so we may as well save a little bit of time there as well. Signed-off-by: Robin Murphy Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 27 ++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index d325e117287b..dd16c80d923e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -148,15 +148,28 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; clock_in_out = "input"; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; + phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; + snps,reset-delays-us = <0 10000 30000>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = ; + }; + }; }; &gpu { @@ -481,6 +494,16 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { cpu_b_sleep: cpu-b-sleep { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; -- cgit v1.2.3 From 6fffb98645e67b5203e58d5acdfc460eeda51a06 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 12 Feb 2019 15:20:00 +0100 Subject: arm64: dts: renesas: r8a77990: ebisu: Add GPIO expander MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Describe the ON Semiconductor PCA9654 I/O expander on the first I2C bus, which provides 8 extra GPIOs. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 144c0820cf60..4d14926b20f7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -337,6 +337,15 @@ &i2c0 { status = "okay"; + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + }; + hdmi-encoder@39 { compatible = "adi,adv7511w"; reg = <0x39>; -- cgit v1.2.3 From b068ed6efe6244d3cdf6965ffa9668eeea434dcb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 12 Feb 2019 16:21:29 +0100 Subject: arm64: dts: renesas: r8a77990: Fix SPDX license identifier style According to Documentation/process/license-rules.rst, SPDX license identifiers in DTS files should use C++ style comments. Fixes: f37a7767f6c4ec66 ("arm64: dts: renesas: Add Renesas R8A77990 SoC support") Fixes: 77049191b24b4586 ("arm64: dts: renesas: Add Renesas Ebisu board support") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 +- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 4d14926b20f7..fc3e3e297647 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the ebisu board * diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index a69faa60ea4d..b506d5613e01 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the R-Car E3 (R8A77990) SoC * -- cgit v1.2.3 From 96c25882252704dc3167367f70977569f4116fcd Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Fri, 22 Feb 2019 10:34:59 +0100 Subject: arm64: dts: renesas: r8a7796: remove unneeded sound #address/size-cells commit 78bc93b3ffb2 ("arm64: dts: renesas: r8a7796: Add address properties to rcar_sound port nodes") added missing #address-cells and #size-cells for sound ports. But, these are based on platform, not on SoC. This patch cleanups it. Signed-off-by: Jiada Wang Signed-off-by: Timo Wischer Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 1 + arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts | 1 + arch/arm64/boot/dts/renesas/r8a7796.dtsi | 11 ----------- 3 files changed, 2 insertions(+), 11 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index b4f9567cb9f8..2aefa53cb16b 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -68,6 +68,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts index 31f12059355e..d58ede18108d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -68,6 +68,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index cdf784899cf8..111f462cd708 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -2162,17 +2162,6 @@ dma-names = "rx", "tx"; }; }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - }; }; audma0: dma-controller@ec700000 { -- cgit v1.2.3 From 71ac75dffdae2f885e46d0a79d9bd1374f5f29a7 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 23 Jan 2019 00:54:04 +0200 Subject: arm64: dts: renesas: r8a77990: ebisu: Enable LVDS1 encoder The LVDS1 encoder must supply a pixel clock to the DU for the DPAD output when the LVDS0 encoder is used. Enable it despite its output not being connected. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index fc3e3e297647..62004b609b15 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -467,6 +467,13 @@ }; &lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; -- cgit v1.2.3 From 9a0ff5c727b60a3afefc71407612e515f7a51ef3 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 23 Jan 2019 00:54:05 +0200 Subject: arm64: dts: renesas: r8a77995: draak: Enable LVDS1 encoder The LVDS1 encoder must supply a pixel clock to the DU for the DPAD output when the LVDS0 encoder is used. Enable it despite its output not being connected. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index db2bed1751b8..244b0dda03ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -356,6 +356,13 @@ }; &lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + clocks = <&cpg CPG_MOD 727>, <&x12_clk>, <&extal_clk>; -- cgit v1.2.3 From 9130c15829846fae56ea729f42d1894b8413f89b Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Sun, 17 Feb 2019 00:58:53 +0100 Subject: arm64: dts: renesas: ebisu: Fix adv7482 hexadecimal register address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The register address used for the reg property of the adv7482 node in other Renesas device trees are decimal not hex, change this for Ebisu to align it with the others. Signed-off-by: Takeshi Kihara [Niklas: rewrite commit message] Signed-off-by: Niklas Söderlund Acked-by: Kieran Bingham Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 62004b609b15..bfa40196029b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -407,7 +407,7 @@ }; port@a { - reg = <0xa>; + reg = <10>; adv7482_txa: endpoint { clock-lanes = <0>; -- cgit v1.2.3 From 191f7dcd1f5ea1f39abc94cece6156c9fa045974 Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Mon, 25 Feb 2019 13:39:41 +0100 Subject: arm64: dts: renesas: r8a77965: add SSIU support for sound rsnd driver supports SSIU now, let's use it. Then, BUSIF DMA settings on rcar_sound,ssi (= rxu, txu) are no longer needed. Applies commit 8d14bfa074db ("arm64: dts: renesas: r8a7796: add SSIU support for sound") and commit 10bd03fa896e ("arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi") for r8a77965. Signed-off-by: Jiada Wang Signed-off-by: Timo Wischer Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 251 +++++++++++++++++++++++++++--- 1 file changed, 231 insertions(+), 20 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 9763d108e183..f21e3a8bfbd8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1585,56 +1585,267 @@ }; }; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssi { ssi0: ssi-0 { interrupts = ; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = ; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = ; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = ; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = ; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = ; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = ; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = ; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = ; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = ; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; }; -- cgit v1.2.3 From 12ce412b2cc6aea88c9c93e6303372f72014efc6 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Fri, 15 Feb 2019 12:26:29 +0000 Subject: arm64: dts: renesas: r8a774c0: Fix cpu nodes style We usually leave a space between "=" and the value of device tree properties, but unfortunately that was overlooked for the "clocks" property of cpu@0 and cpu@1. This patch fixes the spacing with the "clocks" property of cpu@0 and cpu@1. Signed-off-by: Fabrizio Castro Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 61a0afb74e63..0bbcaf181262 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -76,7 +76,7 @@ power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -87,7 +87,7 @@ power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; -- cgit v1.2.3 From e64f2c4b3aba6832758afe030ea4a703148546d7 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Fri, 1 Mar 2019 11:02:37 +0000 Subject: arm64: dts: renesas: cat875: Add CAN support Add CAN support to the CAT875 sub board. Signed-off-by: Fabrizio Castro Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/cat875.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi index 14db66755a89..aaefc3ae56d5 100644 --- a/arch/arm64/boot/dts/renesas/cat875.dtsi +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi @@ -30,6 +30,18 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pciec0 { status = "okay"; }; @@ -41,4 +53,14 @@ function = "avb"; }; }; + + can0_pins: can0 { + groups = "can0_data"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; }; -- cgit v1.2.3 From 07e72397f722d3a522991dcba82ce2ddb8c3c6e1 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Thu, 21 Feb 2019 09:40:48 +0000 Subject: arm64: dts: renesas: r8a774c0-cat874: add RTC support This patch adds Epson RX-8571 real time clock support. Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 96ee0d2c6357..18ff79c37561 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -56,6 +56,19 @@ clock-frequency = <48000000>; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@32 { + compatible = "epson,rx8571"; + reg = <0x32>; + }; +}; + &pcie_bus_clk { clock-frequency = <100000000>; }; @@ -66,6 +79,11 @@ }; &pfc { + i2c1_pins: i2c1 { + groups = "i2c1_b"; + function = "i2c1"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; -- cgit v1.2.3 From dc0b439471323521a20314934080f51e8589fd19 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Fri, 1 Mar 2019 11:03:32 +0000 Subject: arm64: dts: renesas: r8a774c0-cat874: Add LEDs support This patch adds LEDs support to the CAT874 board specific device tree. Signed-off-by: Fabrizio Castro Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 18ff79c37561..959919af5628 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -22,6 +22,30 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>; + label = "LED0"; + }; + + led1 { + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + label = "LED1"; + }; + + led2 { + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; + label = "LED2"; + }; + + led3 { + gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; + label = "LED3"; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ -- cgit v1.2.3 From a8f6110e64422d5c28046e6be7e8adcee929a418 Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Sun, 17 Feb 2019 00:58:54 +0100 Subject: arm64: dts: renesas: ebisu: Enable VIN5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Both VIN4 and VIN5 are connected to CSI40 and can be configured at runtime to use the single video source connected to CSI40. Enable VIN5 to allow it to be used in this fashion. Signed-off-by: Takeshi Kihara [Niklas: rewrite commit message] Signed-off-by: Niklas Söderlund Reviewed-by: Kieran Bingham Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index bfa40196029b..fb50f4fa8b9d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -666,6 +666,10 @@ status = "okay"; }; +&vin5 { + status = "okay"; +}; + &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; -- cgit v1.2.3 From 79223ca1f57776d2770da9561c26cc2f2dd42205 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Wed, 6 Mar 2019 11:29:45 +0000 Subject: arm64: dts: renesas: r8a774c0-cat874: Add RWDT support Enable RWDT and use 60 seconds as default timeout. Signed-off-by: Fabrizio Castro Reviewed-by: Chris Paterson Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 959919af5628..42c66f9d8f96 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -126,6 +126,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; -- cgit v1.2.3 From 4162aa9db3d44691c6ca67eacfe0099723684506 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 9 Mar 2019 03:06:42 +0100 Subject: arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1 Enable both CAN0 and CAN1 controllers on R8A77995 Draak board, since they are available on connectors CN43, CN44 respectively. Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 244b0dda03ed..babca7cf23b9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -179,6 +179,18 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -382,6 +394,16 @@ }; }; + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data_a"; + function = "can1"; + }; + du_pins: du { groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; function = "du"; -- cgit v1.2.3 From 82ec009297bc573e6aace629181d13ed6ce3772f Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Sun, 10 Mar 2019 14:06:11 +0100 Subject: arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The compatible value renesas,rcar-gen3-csi2 was used while prototyping the R-Car CSI-2 driver but was removed before the driver was merged. Fixes: e961ab42e034d469 ("arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes") Signed-off-by: Niklas Söderlund Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 0bbcaf181262..ebe69dcfa3ca 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1741,8 +1741,7 @@ }; csi40: csi2@feaa0000 { - compatible = "renesas,r8a774c0-csi2", - "renesas,rcar-gen3-csi2"; + compatible = "renesas,r8a774c0-csi2"; reg = <0 0xfeaa0000 0 0x10000>; interrupts = ; clocks = <&cpg CPG_MOD 716>; -- cgit v1.2.3 From af965ba3248edde50c2a57b9c719b419e2feca94 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Wed, 6 Mar 2019 13:39:26 +0100 Subject: arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The compatible value renesas,rcar-gen3-csi2 was used while prototyping the R-Car CSI-2 driver but was removed before the driver was merged. Remove the only occurrence of the compatible value which manage to make it upstream. Fixes: ec70407ae7d7 ("arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes") Signed-off-by: Niklas Söderlund Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index b506d5613e01..0ca7cb72bfa7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1657,7 +1657,7 @@ }; csi40: csi2@feaa0000 { - compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2"; + compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; interrupts = ; clocks = <&cpg CPG_MOD 716>; -- cgit v1.2.3 From 1f4c123a98098cce0c172264de7da4fab1ff71b9 Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Wed, 13 Mar 2019 11:58:15 +0100 Subject: arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC This patch adds the regulator definition required for operation of S2RAM. Signed-off-by: Takeshi Kihara Signed-off-by: Yoshihiro Kaneko Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index fb50f4fa8b9d..18a99d2e1ea5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -449,6 +449,26 @@ }; }; +&i2c_dvfs { + status = "okay"; + + clock-frequency = <400000>; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &lvds0 { status = "okay"; @@ -511,6 +531,11 @@ function = "du"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + pwm3_pins: pwm3 { groups = "pwm3_b"; function = "pwm3"; -- cgit v1.2.3 From 474706117c2baa68bf053f16cd35618d30bf4c06 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 13 Mar 2019 11:58:16 +0100 Subject: arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config On Ebisu the DDR0 power rail needs to be kept powered when backup mode is enabled. Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. The accessory power switch (SW23) is a toggle switch, hence specify "rohm,rstbmode-level". Based on advice from Geert Uytterhoeven. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 18a99d2e1ea5..0e873ccfd9e5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -466,6 +466,8 @@ #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + rohm,ddr-backup-power = <0x1>; + rohm,rstbmode-level; }; }; -- cgit v1.2.3 From 78c484a55d915e36891be5bae92e516fdac8609d Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Sat, 9 Mar 2019 16:46:58 +0530 Subject: arm64: zynqmp: dt: Add TI PHY quirk Add TI PHY strap ctrl quirk for all the HW where applicable. Signed-off-by: Harini Katakam Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 1 + arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 1 + 6 files changed, 6 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index 11cc67184fa9..2421ec71a201 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -89,6 +89,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index cef81671f3ab..2a3b66547c6d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -110,6 +110,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts index af4d86882a5c..1780ed237daf 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -21,6 +21,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; /* Cleanup from RevA */ /delete-node/ phy@21; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index d4ad19a38c93..8f456146409f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -55,6 +55,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 94cf5094df64..93ce7eb81498 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -111,6 +111,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 460adc378295..8bb0001a026f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -106,6 +106,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; -- cgit v1.2.3 From b7be144932a8376fbb886115ce908a1a1818940b Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 12 Feb 2019 15:02:59 +0100 Subject: arm64: dts: Add SEI Robotics SEI510 Board The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2 and has the following features : - Amlogic G12A S905X2 SoC - 10/100 Ethernet - USB2 + USB3 ports - Micro SDCard Port - Audio + CVBS AV Jack port - HDMI 2.1 + CEC Port - ADC Touch Button - Far-Field Microphone Array + Mono HP - IR Sensor - IR Emmiter LED Array - RGB Led Signed-off-by: Neil Armstrong [khilman: sorted Makefile entry alphabetcially] Signed-off-by: Kevin Hilman --- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + arch/arm64/boot/dts/amlogic/Makefile | 1 + arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 38 +++++++++++++++++++++++ 3 files changed, 40 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts (limited to 'arch/arm64') diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 7f40cb5f490b..061f7b98a07f 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -110,6 +110,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,u200" (Meson g12a s905d2) - "amediatech,x96-max" (Meson g12a s905x2) + - "seirobotics,sei510" (Meson g12a s905x2) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0821fed4c074..e129c03ced14 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts new file mode 100644 index 000000000000..6a7c3241862a --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "seirobotics,sei510", "amlogic,g12a"; + model = "SEI Robotics SEI510"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; +}; + +&uart_AO { + status = "okay"; +}; -- cgit v1.2.3 From 0fa724c51e31cc814af9e44c019fb4d570422b02 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 7 Mar 2019 15:01:47 +0100 Subject: arm64: dts: meson-g12a: Add AO Secure node This adds the Always-On ao-secure system control registers node, which is used by the meson-gx-socinfo driver to detect the SoC IDs. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 17c6217f8a84..31ddf9444b3e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -122,6 +122,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; -- cgit v1.2.3 From 7e09092aee006b21d830b99f8498b5640b8711f6 Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Tue, 12 Mar 2019 16:33:26 +0800 Subject: arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED There is a white LED on the front panel behind the logo and the manufacturer uses that LED to indicate network and USB drive status. Signed-off-by: Chuanhong Guo Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index 9a8a8a7e4b53..b5667f1fb2c8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -14,6 +14,16 @@ cvbs-connector { status = "disabled"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "n1:white:status"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &cvbs_vdac_port { -- cgit v1.2.3 From bd39515284120fc806fd0bea86fecd39908e18dc Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 15 Mar 2019 14:42:43 +0100 Subject: arm64: dts: meson: g12a: add secure monitor Add the interface to the secure monitor on g12a Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 31ddf9444b3e..92ee8c895ba6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -72,6 +72,10 @@ }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; -- cgit v1.2.3 From 965c827ac37e71f76d3ac55c75ac08909f2a4eed Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 15 Mar 2019 14:42:44 +0100 Subject: arm64: dts: meson: g12a: add efuse Add the g12a SoC efuse device Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 92ee8c895ba6..dcc821cf35bb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -4,6 +4,7 @@ */ #include +#include #include #include @@ -55,6 +56,14 @@ }; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; -- cgit v1.2.3 From e5e4df2dccec7b59ce98604c02e807021a4c7850 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 15 Mar 2019 14:49:09 +0100 Subject: arm64: dts: meson-gxm-nexbox-a1: Enable USB Enable USB on the Nexbox A1 STB Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 8acfd40090d2..25f3b6b14043 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -178,3 +178,7 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; -- cgit v1.2.3 From 7be494dd81c1b744694814edba022f45cec9b4db Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 26 Feb 2019 05:17:31 +0000 Subject: arm64: dts: imx8qxp: add cpu opp table Add i.MX8QXP CPU opp table to support cpufreq. Signed-off-by: Anson Huang Acked-by: Viresh Kumar Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 4c3dd95ed488..019abce843bf 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -34,6 +34,9 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_1: cpu@1 { @@ -42,6 +45,9 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_2: cpu@2 { @@ -50,6 +56,9 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_3: cpu@3 { @@ -58,6 +67,9 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_L2: l2-cache0 { @@ -65,6 +77,24 @@ }; }; + a35_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + gic: interrupt-controller@51a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ -- cgit v1.2.3 From 9e113b2e87758a6a0150e0878d2d86b14a0a5328 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Tue, 26 Feb 2019 09:04:48 +0000 Subject: arm64: dts: imx8mq: Add on-chip OTP controller node Add the node for the OTP controller. Signed-off-by: Carlo Caione Reviewed-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 9155bd4784eb..6a1cc183a301 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -244,6 +244,14 @@ reg = <0x30340000 0x10000>; }; + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mq-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; + #address-cells = <1>; + #size-cells = <1>; + }; + anatop: syscon@30360000 { compatible = "fsl,imx8mq-anatop", "syscon"; reg = <0x30360000 0x10000>; -- cgit v1.2.3 From f54f7be5c5acd8be3bf2d5b2caab06870b2ee65d Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Fri, 1 Mar 2019 15:46:32 +0800 Subject: arm64: dts: ls1028a: Add Audio DT nodes This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards. Signed-off-by: Alison Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 62 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 63 +++++++++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 57 ++++++++++++++++++++ 3 files changed, 182 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 14c79f4691ea..b359068d9605 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -32,6 +32,49 @@ device_type = "memory"; reg = <0x0 0x80000000 0x1 0x00000000>; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; }; &duart0 { @@ -89,5 +132,24 @@ reg = <0x57>; }; }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; + }; }; }; + +&sai1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index f86b054a74ae..f9c272fb0738 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -28,6 +28,49 @@ device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0000000>; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai4>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; }; &i2c0 { @@ -39,6 +82,22 @@ #address-cells = <1>; #size-cells = <0>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + sclk-strength = <3>; + }; + }; + i2c@2 { #address-cells = <1>; #size-cells = <0>; @@ -88,3 +147,7 @@ &enetc_port1 { status = "disabled"; }; + +&sai4 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 2896bbcfa3bb..944e016eb074 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -235,6 +235,21 @@ status = "disabled"; }; + edma0: dma-controller@22c0000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x22c0000 0x0 0x10000>, + <0x0 0x22d0000 0x0 0x10000>, + <0x0 0x22e0000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; + }; + gpio1: gpio@2300000 { compatible = "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; @@ -336,6 +351,48 @@ , ; }; + sai1: audio-controller@f100000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf100000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 4>, + <&edma0 1 3>; + status = "disabled"; + }; + + sai2: audio-controller@f110000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf110000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 6>, + <&edma0 1 5>; + status = "disabled"; + }; + + sai4: audio-controller@f130000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf130000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 10>, + <&edma0 1 9>; + status = "disabled"; + }; + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; -- cgit v1.2.3 From b810641a34702a747cb47e2cc1ecaa20f374868e Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Thu, 28 Feb 2019 21:42:44 +0000 Subject: arm64: dts: imx8mq: Add the clocks and the latencies for the A53 cores The clocks and their latencies will be used by cpufreq-dt. Signed-off-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 6a1cc183a301..07f7dfff6b91 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -87,6 +87,8 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; }; @@ -95,6 +97,8 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; }; @@ -103,6 +107,8 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; }; @@ -111,6 +117,8 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; }; -- cgit v1.2.3 From 9b87ebb149afae0855572a0562df18ab45858c18 Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Thu, 28 Feb 2019 21:42:45 +0000 Subject: arm64: dts: imx8mq: Add the buck vdd_arm regulator According to the schematics, this is a MP2147 switch converter which is controlled by GPIO1_IO13. When set the gpio is set to high the regulator output is set to 0.9V. When the gpio is set to low the regulator output is set to 1V. Signed-off-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 35 ++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 54737bf1772f..afea110b70a3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -31,6 +31,34 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + buck2_reg: regulator-buck2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buck2>; + compatible = "regulator-gpio"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + states = <1000000 0x0 + 900000 0x1>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; }; &fec1 { @@ -203,6 +231,13 @@ }; &iomuxc { + pinctrl_buck2: vddarmgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 + >; + + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 -- cgit v1.2.3 From 64d26f8c1ddee30b61e18c11a0733b3091ad2562 Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Thu, 28 Feb 2019 21:42:46 +0000 Subject: arm64: dts: imx8mq: Add the opp table and cores opp properties Add the 0.8GHz and 1GHz opps. According to the datasheet: https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQIEC.pdf section 3.1.3 Operating ranges. The 0.8GHz opp runs in nominal mode with the regulator set to 0.9V. The 1GHz runs in overdrive mode with the regulator set to 1V. Signed-off-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 07f7dfff6b91..0c593dd62701 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -91,6 +91,7 @@ clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_1: cpu@1 { @@ -101,6 +102,7 @@ clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_2: cpu@2 { @@ -111,6 +113,7 @@ clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_3: cpu@3 { @@ -121,6 +124,7 @@ clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_L2: l2-cache0 { @@ -674,6 +678,25 @@ status = "disabled"; }; + + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ -- cgit v1.2.3 From b542570e560554efc2fd3d7db68fe39b34212c37 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Mon, 28 Jan 2019 21:55:04 +0100 Subject: arm64: dts: allwinner: h6: Add Video Engine node This adds the Video engine node for H6. It can use whole DRAM range so there is no need for reserved memory node. Signed-off-by: Jernej Skrabec Reviewed-by: Paul Kocialkowski Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index c9e861a50a63..e6cbe01e5558 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -146,6 +146,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun50i-h6-video-engine"; + reg = <0x01c0e000 0x2000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_MBUS_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = ; + allwinner,sram = <&ve_sram 1>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; -- cgit v1.2.3 From eccc40002972c4248652befa4513c76cdb350a5c Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Thu, 17 Jan 2019 14:54:15 +0000 Subject: arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes According to the latest information, clkp2 is available on RZ/G2. Modify CAN0 and CAN1 nodes accordingly. Signed-off-by: Fabrizio Castro Reviewed-by: Chris Paterson Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index ef3cff2dd1b6..de282c4794ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -879,8 +879,10 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c30000 0 0x1000>; interrupts = ; - clocks = <&cpg CPG_MOD 916>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774A1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -891,8 +893,10 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c38000 0 0x1000>; interrupts = ; - clocks = <&cpg CPG_MOD 915>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774A1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; -- cgit v1.2.3 From 80bc6dbb8fdb6c6dc650756470fb3457c575ac51 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Fri, 1 Mar 2019 11:04:16 +0000 Subject: arm64: dts: renesas: r8a774c0: Add CANFD support The CANFD implementation on the RZ/G2E (a.k.a. r8a774c0) is identical to the one found on the r8a77990. Signed-off-by: Fabrizio Castro Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index ebe69dcfa3ca..5b7fca953964 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -988,6 +988,31 @@ status = "disabled"; }; + canfd: can@e66c0000 { + compatible = "renesas,r8a774c0-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774C0_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; -- cgit v1.2.3 From 036bc85c1d06ef0a0924aed3fbbef8dccb86b9a1 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Wed, 16 Jan 2019 18:37:53 +0000 Subject: arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes According to the latest information, clkp2 is available on RZ/G2. Modify CAN0 and CAN1 nodes accordingly. Signed-off-by: Fabrizio Castro Reviewed-by: Chris Paterson Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 5b7fca953964..638eb015d6ca 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -969,8 +969,10 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c30000 0 0x1000>; interrupts = ; - clocks = <&cpg CPG_MOD 916>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774C0_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -981,8 +983,10 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c38000 0 0x1000>; interrupts = ; - clocks = <&cpg CPG_MOD 915>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774C0_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; -- cgit v1.2.3 From 580b064de64c7c6a31db0da6f2ead4e4f3227b56 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 27 Feb 2019 01:28:32 +0000 Subject: arm64: dts: imx8mq: add clock for GPIO node i.MX8MQ has clock gate for each GPIO bank, add clock info to GPIO node for clock management. Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 0c593dd62701..32a02027df92 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -172,6 +172,7 @@ reg = <0x30200000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -183,6 +184,7 @@ reg = <0x30210000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -194,6 +196,7 @@ reg = <0x30220000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -205,6 +208,7 @@ reg = <0x30230000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -216,6 +220,7 @@ reg = <0x30240000 0x10000>; interrupts = , ; + clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; -- cgit v1.2.3 From 1474d48bd63976d274e3dc4582bd9e19937b54af Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Tue, 19 Mar 2019 17:48:37 +0000 Subject: arm64: dts: imx8mq: Add SDMA nodes SDMA1 is part of AIPS-3 region and SDMA2 is part of AIPS-1 region. Signed-off-by: Anson Huang Signed-off-by: Daniel Baluta Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 32a02027df92..7a62413bc1cd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -251,6 +251,17 @@ status = "disabled"; }; + sdma2: sdma@302c0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>, + <&clk IMX8MQ_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + iomuxc: iomuxc@30330000 { compatible = "fsl,imx8mq-iomuxc"; reg = <0x30330000 0x10000>; @@ -600,6 +611,17 @@ status = "disabled"; }; + sdma1: sdma@30bd0000 { + compatible = "fsl, imx8mq-sdma","fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, + <&clk IMX8MQ_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + fec1: ethernet@30be0000 { compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; -- cgit v1.2.3 From 8c61538dc9458c1c876d09953d24dba69cd5704f Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Tue, 19 Mar 2019 17:48:40 +0000 Subject: arm64: dts: imx8mq: Add SAI2 node SAI2 is part of AIPS-3 memory region. Signed-off-by: Daniel Baluta Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 7a62413bc1cd..87faf9d2f65a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -514,6 +514,21 @@ status = "disabled"; }; + sai2: sai@308b0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai", + "fsl,imx6sx-sai"; + reg = <0x308b0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, + <&clk IMX8MQ_CLK_SAI2_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; reg = <0x30a20000 0x10000>; -- cgit v1.2.3 From c6578d98766a9ddad159a373c3a0c0f65c529430 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Tue, 19 Mar 2019 17:48:41 +0000 Subject: arm64: dts: imx8mq-evk: Enable audio codec wm8524 The main Audio DAC used on the EVK board is wm8524 The EVK provides the MCLK to wm8524. Digital interface is SAI2 which includes three signals: SYNC_CLK, BCLK and DACDAT. This patch sets: * SAI2 pinctrl configuration * clock hierarchy * wm8524 codec Then uses simple-card machine driver to connect them into a sound card. Signed-off-by: Daniel Baluta Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 48 ++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index afea110b70a3..304c28034ddf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -43,6 +43,35 @@ states = <1000000 0x0 900000 0x1>; }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + }; + }; }; &A53_0 { @@ -80,6 +109,15 @@ }; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -283,6 +321,16 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 -- cgit v1.2.3 From b9eb314ae888a7162bed8cfdd01fe415e0def139 Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Wed, 6 Mar 2019 16:20:05 +0800 Subject: arm64: dts: ls1028a: Add pmu dt nodes This patch adds pmu dt nodes for LS1028A. Signed-off-by: Alison Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 944e016eb074..8dd3501b1333 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -89,6 +89,11 @@ IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = ; + }; + gic: interrupt-controller@6000000 { compatible= "arm,gic-v3"; #address-cells = <2>; -- cgit v1.2.3 From ee4c12f4390743013029cfe4f895d1becc35880b Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Sat, 9 Mar 2019 08:02:09 +0530 Subject: arm64: dts: freescale: Enable PCI-E controller for Oxalis board Enable PCI-E controller for Oxalis board based on NXP/Freescale LS1012a SoC available as the Mini PCI-E connector on the bottom side. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts index 7c726267ec8f..9927b096d343 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts @@ -87,6 +87,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + &sai2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 1ce0042b2a14..ec6257a5b251 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -475,7 +475,7 @@ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - pcie@3400000 { + pcie: pcie@3400000 { compatible = "fsl,ls1012a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ -- cgit v1.2.3 From 7698ffaf4198640ab5a9fea88eb804947ccd9f5b Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Wed, 20 Mar 2019 14:07:01 +0100 Subject: arm64: dts: exynos: configure GSCALER related clocks on TM2 GSCALER should be feed with clock at certain rates. Configure it on Exynos5433 based TM2 board. Signed-off-by: Andrzej Hajda Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 6 ++++++ arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 6 ++++-- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index d88e2f0e179a..d2de16645e10 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -289,6 +289,12 @@ assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; }; +&cmu_mif { + assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>; + assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>; + assigned-clock-rates = <0>, <333000000>; +}; + &cmu_mscl { assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 3d7e0a782243..dda5d2746a74 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -33,7 +33,8 @@ <&cmu_disp CLK_MOUT_DISP_PLL>, <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, - <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_MOUT_SCLK_DSD_USER>; assigned-clock-parents = <0>, <0>, <&cmu_mif CLK_ACLK_DISP_333>, <&cmu_mif CLK_SCLK_DSIM0_DISP>, @@ -45,7 +46,8 @@ <&cmu_disp CLK_FOUT_DISP_PLL>, <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, - <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, + <&cmu_mif CLK_SCLK_DSD_DISP>; assigned-clock-rates = <250000000>, <400000000>; }; -- cgit v1.2.3 From 45eedc0e36088454c35a68beab2a784038e8b321 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Wed, 20 Mar 2019 14:07:02 +0100 Subject: arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433 To support local paths both DECON and GSCALER should enable respective Smart Deck clocks DSD and GSD on Exynos5433. Signed-off-by: Andrzej Hajda Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index a04e80327b6e..4bc55ee25bfe 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -848,12 +848,13 @@ <&cmu_disp CLK_ACLK_XIU_DECON1X>, <&cmu_disp CLK_PCLK_SMMU_DECON1X>, <&cmu_disp CLK_SCLK_DECON_VCLK>, - <&cmu_disp CLK_SCLK_DECON_ECLK>; + <&cmu_disp CLK_SCLK_DECON_ECLK>, + <&cmu_disp CLK_SCLK_DSD>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x", "pclk_smmu_decon1x", "sclk_decon_vclk", - "sclk_decon_eclk"; + "sclk_decon_eclk", "dsd"; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = , @@ -890,12 +891,13 @@ <&cmu_disp CLK_ACLK_XIU_TV1X>, <&cmu_disp CLK_PCLK_SMMU_TV1X>, <&cmu_disp CLK_SCLK_DECON_TV_VCLK>, - <&cmu_disp CLK_SCLK_DECON_TV_ECLK>; + <&cmu_disp CLK_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_SCLK_DSD>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x", "pclk_smmu_decon1x", "sclk_decon_vclk", - "sclk_decon_eclk"; + "sclk_decon_eclk", "dsd"; samsung,disp-sysreg = <&syscon_disp>; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; @@ -1022,11 +1024,12 @@ reg = <0x13c00000 0x1000>; interrupts = ; clock-names = "pclk", "aclk", "aclk_xiu", - "aclk_gsclbend"; + "aclk_gsclbend", "gsd"; clocks = <&cmu_gscl CLK_PCLK_GSCL0>, <&cmu_gscl CLK_ACLK_GSCL0>, <&cmu_gscl CLK_ACLK_XIU_GSCLX>, - <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + <&cmu_gscl CLK_ACLK_GSCLBEND_333>, + <&cmu_gscl CLK_ACLK_GSD>; iommus = <&sysmmu_gscl0>; power-domains = <&pd_gscl>; }; @@ -1036,11 +1039,12 @@ reg = <0x13c10000 0x1000>; interrupts = ; clock-names = "pclk", "aclk", "aclk_xiu", - "aclk_gsclbend"; + "aclk_gsclbend", "gsd"; clocks = <&cmu_gscl CLK_PCLK_GSCL1>, <&cmu_gscl CLK_ACLK_GSCL1>, <&cmu_gscl CLK_ACLK_XIU_GSCLX>, - <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + <&cmu_gscl CLK_ACLK_GSCLBEND_333>, + <&cmu_gscl CLK_ACLK_GSD>; iommus = <&sysmmu_gscl1>; power-domains = <&pd_gscl>; }; @@ -1050,11 +1054,12 @@ reg = <0x13c20000 0x1000>; interrupts = ; clock-names = "pclk", "aclk", "aclk_xiu", - "aclk_gsclbend"; + "aclk_gsclbend", "gsd"; clocks = <&cmu_gscl CLK_PCLK_GSCL2>, <&cmu_gscl CLK_ACLK_GSCL2>, <&cmu_gscl CLK_ACLK_XIU_GSCLX>, - <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + <&cmu_gscl CLK_ACLK_GSCLBEND_333>, + <&cmu_gscl CLK_ACLK_GSD>; iommus = <&sysmmu_gscl2>; power-domains = <&pd_gscl>; }; -- cgit v1.2.3 From 77fc46976e0bfcd78d30fb4c9f0169752b4339c9 Mon Sep 17 00:00:00 2001 From: Kamil Konieczny Date: Fri, 22 Feb 2019 13:21:42 +0100 Subject: arm64: dts: exynos: Add SlimSSS to Exynos5433 Add DT node for SlimSSS (aka Slim SecuritySubSystem) in Exynos5433 SoC. Signed-off-by: Kamil Konieczny Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 4bc55ee25bfe..41ecbc49c61e 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -559,6 +559,15 @@ <&cmu_top CLK_DIV_ACLK_IMEM_200>; }; + slim_sss: slim-sss@11140000 { + compatible = "samsung,exynos5433-slim-sss"; + reg = <0x11140000 0x1000>; + interrupts = ; + clock-names = "aclk", "pclk"; + clocks = <&cmu_imem CLK_ACLK_SLIMSSS>, + <&cmu_imem CLK_PCLK_SLIMSSS>; + }; + pd_gscl: power-domain@105c4000 { compatible = "samsung,exynos5433-pd"; reg = <0x105c4000 0x20>; -- cgit v1.2.3 From 152d58234ef41c586e7b268ceea691dc80130a59 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 18 Mar 2019 15:33:54 +0800 Subject: ARM: dts: sunxi: h3/h5: Add device node for SID The device tree binding already lists compatible strings for these two SoCs. Add a device node for them. Acked-by: Maxime Ripard Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-h3.dtsi | 4 ++++ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 5 +++++ arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 4 ++++ 3 files changed, 13 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 959d265e7254..e37c30e811d3 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -231,3 +231,7 @@ &rtc { compatible = "allwinner,sun8i-h3-rtc"; }; + +&sid { + compatible = "allwinner,sun8i-h3-sid"; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index d74a6cbbfdf4..395521e83ee7 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -227,6 +227,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 96acafd3a852..f002a496d7cb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -209,3 +209,7 @@ &rtc { compatible = "allwinner,sun50i-h5-rtc"; }; + +&sid { + compatible = "allwinner,sun50i-h5-sid"; +}; -- cgit v1.2.3 From 14c7c02d2145f8e903f029587b5674f3c05d2111 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 13 Mar 2019 09:24:19 +0000 Subject: arm64: dts: imx8qxp: fix mbox-cells Currently lsio_mu1 is used by Linux Kernel with mbox-cells as 2, but actually mu0-4 could be used to communicate with SCU. So fix the mbox-cells. Signed-off-by: Peng Fan Reviewed-by: Dong Aisheng Fixes: 3d91ba65fecd ("arm64: dts: imx: add imx8qxp support") Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 019abce843bf..c1780e7ee294 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -358,7 +358,7 @@ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1b0000 0x10000>; interrupts = ; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -373,7 +373,7 @@ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1e0000 0x10000>; interrupts = ; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -381,7 +381,7 @@ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1f0000 0x10000>; interrupts = ; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; -- cgit v1.2.3 From e8449baa5c0136eb04b789bf31b19f2e77f788d0 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 13 Mar 2019 09:24:42 +0000 Subject: arm64: dts: imx8qxp: add lsio_mu2 node Add lsio_mu2 node which could be used communicate with SCU. Signed-off-by: Peng Fan Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index c1780e7ee294..0cb939861a60 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -369,6 +369,14 @@ #mbox-cells = <2>; }; + lsio_mu2: mailbox@5d1d0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1d0000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + status = "disabled"; + }; + lsio_mu3: mailbox@5d1e0000 { compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1e0000 0x10000>; -- cgit v1.2.3 From 922bfb7c27f76104fa2d19400a592d3e6e0f5fd8 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 5 Feb 2019 16:36:15 -0600 Subject: arm64: dts: stratix10: enable MMC highspeed support Add 'cap-mmc-highspeed' property to enable high-speed support for MMC cards. Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 2e3863ee12b3..c26f11a2089a 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -107,6 +107,7 @@ &mmc { status = "okay"; cap-sd-highspeed; + cap-mmc-highspeed; broken-cd; bus-width = <4>; }; -- cgit v1.2.3 From e464fd2ba4d4573445574388b0b5240ae37c1740 Mon Sep 17 00:00:00 2001 From: "Angus Ainslie (Purism)" Date: Fri, 22 Mar 2019 10:09:13 +0800 Subject: arm64: dts: imx8mq: enable the multi sensor TMU Add the imx8mq TMU (Thermal management unit) nodes for CPU, GPU, and VPU. Signed-off-by: Angus Ainslie (Purism) Reviewed-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 118 ++++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 87faf9d2f65a..769504cfcc65 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include #include "imx8mq-pinfunc.h" / { @@ -92,6 +93,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -103,6 +105,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -114,6 +117,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -125,6 +129,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -227,6 +232,119 @@ #interrupt-cells = <2>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mq-tmu"; + reg = <0x30260000 0x10000>; + interrupt = ; + little-endian; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; + fsl,tmu-calibration = <0x00000000 0x00000023 + 0x00000001 0x00000029 + 0x00000002 0x0000002f + 0x00000003 0x00000035 + 0x00000004 0x0000003d + 0x00000005 0x00000043 + 0x00000006 0x0000004b + 0x00000007 0x00000051 + 0x00000008 0x00000057 + 0x00000009 0x0000005f + 0x0000000a 0x00000067 + 0x0000000b 0x0000006f + + 0x00010000 0x0000001b + 0x00010001 0x00000023 + 0x00010002 0x0000002b + 0x00010003 0x00000033 + 0x00010004 0x0000003b + 0x00010005 0x00000043 + 0x00010006 0x0000004b + 0x00010007 0x00000055 + 0x00010008 0x0000005d + 0x00010009 0x00000067 + 0x0001000a 0x00000070 + + 0x00020000 0x00000017 + 0x00020001 0x00000023 + 0x00020002 0x0000002d + 0x00020003 0x00000037 + 0x00020004 0x00000041 + 0x00020005 0x0000004b + 0x00020006 0x00000057 + 0x00020007 0x00000063 + 0x00020008 0x0000006f + + 0x00030000 0x00000015 + 0x00030001 0x00000021 + 0x00030002 0x0000002d + 0x00030003 0x00000039 + 0x00030004 0x00000045 + 0x00030005 0x00000053 + 0x00030006 0x0000005f + 0x00030007 0x00000071>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 1>; + + trips { + gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 2>; + + trips { + vpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; -- cgit v1.2.3 From e4282ddbd2a8065e883475f2849dc1687aa57125 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Wed, 20 Mar 2019 14:38:04 +0000 Subject: arm64: dts: fsl: Remove unused properties from FSL QSPI nodes After switching to the new FSL QSPI driver the properties 'fsl,qspi-has-second-chip' and 'big-endian' are not used anymore. The driver now uses the 'reg' property to determine the bus and the chipselect. The endianness is selected by the driver depending on which SoC is used. Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 - arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 -- 2 files changed, 3 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 6fd6116509cc..2fb8138c6bb0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -296,7 +296,6 @@ interrupts = <0 99 0x4>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 0>, <&clockgen 4 0>; - big-endian; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index cb7185014d3a..b0ef08b090dd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -215,8 +215,6 @@ interrupts = ; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; - big-endian; - fsl,qspi-has-second-chip; status = "disabled"; }; -- cgit v1.2.3 From 00f1dac3c2d679023fb62b130c63b1c3306ab9c0 Mon Sep 17 00:00:00 2001 From: Horia Geantă Date: Wed, 20 Mar 2019 17:29:00 +0200 Subject: arm64: dts: ls1043a: add crypto node alias also for qds MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit crypto node alias is needed by U-boot to identify the node and perform fix-ups, like adding "fsl,sec-era" property or deleting a job ring child node (in case ARM TF-A is running). Signed-off-by: Horia Geantă Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 1 - arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 17ca357e854f..4223a2352d45 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -15,7 +15,6 @@ model = "LS1043A RDB Board"; aliases { - crypto = &crypto; serial0 = &duart0; serial1 = &duart1; serial2 = &duart2; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 2fb8138c6bb0..71d9ed9ff985 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -18,6 +18,7 @@ #size-cells = <2>; aliases { + crypto = &crypto; fman0 = &fman0; ethernet0 = &enet0; ethernet1 = &enet1; -- cgit v1.2.3 From dbde7ec3ce0d54850af7a009140be1312ac776d7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Mar 2019 17:05:19 -0300 Subject: arm64: dts: imx8mq: Move the opp table out of bus node Move opp-table node from soc node to root node. opp-table node does not have any register properties and thus shouldn't be placed inside the bus. This fixes the following build warnings with W=1: arch/arm64/boot/dts/freescale/imx8mq.dtsi:687.28-703.5: Warning (simple_bus_reg): /soc@0/opp-table: missing or empty reg/ranges property Fixes: 64d26f8c1dde ("arm64: dts: imx8mq: Add the opp table and cores opp properties") Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 37 +++++++++++++++---------------- 1 file changed, 18 insertions(+), 19 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 769504cfcc65..230f198ad87a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -137,6 +137,24 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; @@ -838,25 +856,6 @@ status = "disabled"; }; - - a53_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <900000>; - clock-latency-ns = <150000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1000000>; - clock-latency-ns = <150000>; - opp-suspend; - }; - }; - gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ -- cgit v1.2.3 From b019f4a4199f865b054262ff78f606ca70f7b981 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 18 Mar 2019 10:58:44 +0100 Subject: arm64: dts: meson: g12a: Add AO Clock + Reset Controller support Add nodes and properties for the AO Clocks and Resets. Signed-off-by: Neil Armstrong Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index dcc821cf35bb..abfa167751af 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -135,6 +135,23 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + rti: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", + "simple-mfd", "syscon"; + reg = <0x0 0x0 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-g12a-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; + }; + }; + sec_AO: ao-secure@140 { compatible = "amlogic,meson-gx-ao-secure", "syscon"; reg = <0x0 0x140 0x0 0x140>; -- cgit v1.2.3 From 11a7bea17c9e0a36daab934d83e15a760f402147 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 18 Mar 2019 10:58:45 +0100 Subject: arm64: dts: meson: g12a: add pinctrl support controllers Add the peripheral and always-on pinctrl controllers to the g12a soc. Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 42 +++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index abfa167751af..5e07e4ca3f4b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -104,6 +104,29 @@ #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + + periphs_pinctrl: pinctrl@40 { + compatible = "amlogic,meson-g12a-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@40 { + reg = <0x0 0x40 0x0 0x4c>, + <0x0 0xe8 0x0 0x18>, + <0x0 0x120 0x0 0x18>, + <0x0 0x2c0 0x0 0x40>, + <0x0 0x340 0x0 0x1c>; + reg-names = "gpio", + "pull", + "pull-enable", + "mux", + "ds"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 86>; + }; + }; }; hiu: bus@3c000 { @@ -150,6 +173,25 @@ clocks = <&xtal>, <&clkc CLKID_CLK81>; clock-names = "xtal", "mpeg-clk"; }; + + ao_pinctrl: pinctrl@14 { + compatible = "amlogic,meson-g12a-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x14 0x0 0x8>, + <0x0 0x1c 0x0 0x8>, + <0x0 0x24 0x0 0x14>; + reg-names = "mux", + "ds", + "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ao_pinctrl 0 0 15>; + }; + }; }; sec_AO: ao-secure@140 { -- cgit v1.2.3 From e92546c226ec16005994d2798c8ad6470bcda1b1 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 18 Mar 2019 10:58:46 +0100 Subject: arm64: dts: meson: g12a: add uart_ao_a pinctrl Add the always on UART pinctrl setting to the g12a soc DT. Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 5e07e4ca3f4b..3784b94c5df7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -191,6 +191,24 @@ #gpio-cells = <2>; gpio-ranges = <&ao_pinctrl 0 0 15>; }; + + uart_ao_a_pins: uart-a-ao { + mux { + groups = "uart_ao_a_tx", + "uart_ao_a_rx"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { + mux { + groups = "uart_ao_a_cts", + "uart_ao_a_rts"; + function = "uart_ao_a"; + bias-disable; + }; + }; }; }; -- cgit v1.2.3 From 7ab41c4741253f8f33a1af60b9839cfcd62ee455 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 18 Mar 2019 10:58:47 +0100 Subject: arm64: dts: meson: g12a: add reset controller Add the reset controller device of g12a SoC family Signed-off-by: Jerome Brunet Reviewed-by: Martin Blumenstingl Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 3784b94c5df7..1d3e5083c441 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -259,6 +259,13 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; + reset: reset-controller@1004 { + compatible = "amlogic,meson-g12a-reset", + "amlogic,meson-axg-reset"; + reg = <0x0 0x1004 0x0 0x9c>; + #reset-cells = <1>; + }; + clk_msr: clock-measure@18000 { compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; -- cgit v1.2.3 From ff4f8b6cab5885ebc2c6b21fd058db8544e2eebb Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 18 Mar 2019 10:58:48 +0100 Subject: arm64: dts: meson: g12a: Add UART A, B & C nodes and pins This patch adds the 3 UART nodes in the EE power domain with the corresponding pinctrl nodes. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 72 +++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 1d3e5083c441..4d04742b05c2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -126,6 +126,51 @@ #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 86>; }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_b_pins: uart-b { + mux { + groups = "uart_b_tx", + "uart_b_rx"; + function = "uart_b"; + bias-disable; + }; + }; + + uart_c_pins: uart-c { + mux { + groups = "uart_c_tx", + "uart_c_rx"; + function = "uart_c"; + bias-disable; + }; + }; + + uart_c_cts_rts_pins: uart-c-cts-rts { + mux { + groups = "uart_c_cts", + "uart_c_rts"; + function = "uart_c"; + bias-disable; + }; + }; }; }; @@ -270,6 +315,33 @@ compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; }; + + uart_C: serial@22000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x22000 0x0 0x18>; + interrupts = ; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = ; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = ; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; }; }; -- cgit v1.2.3 From 638914212ace84264accaa41578cf80a18797d91 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 18 Mar 2019 11:04:48 +0100 Subject: arm64: dts: meson-g12a-u200: add uart_AO pinctrl Add pinctrl on the always-enabled debug UART AO. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index c44dbdddf2cf..f2afd0bf3e28 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -25,5 +25,7 @@ &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; -- cgit v1.2.3 From 51d215c14341a1e769828f9f1ff14f95c7ad35e3 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 18 Mar 2019 11:04:49 +0100 Subject: arm64: dts: meson-g12a-sei510: add uart_AO pinctrl Add pinctrl on the always-enabled debug UART AO. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 6a7c3241862a..63c515fe4996 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -35,4 +35,6 @@ &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; -- cgit v1.2.3 From 0b7aed337ff0f4ff82c3d920a9d022a34c246b6f Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 18 Mar 2019 11:04:50 +0100 Subject: arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl Add pinctrl on the always-enabled debug UART AO. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index c62d3d5706ff..0edbd00b358f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -25,4 +25,6 @@ &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; -- cgit v1.2.3 From 2297c33c19af6a90a03c5144836c2a088e74c7b3 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 18 Mar 2019 11:04:52 +0100 Subject: arm64: dts: meson-g12a-sei510: add regulators Add some regulators. Still missing * VDD_EE (0.8V - PWM controlled) * VDD_CPU(PWM controlled) * VDDQ1_5 Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong Acked-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 57 +++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 63c515fe4996..43d57e20294a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "meson-g12a.dtsi" +#include +#include / { compatible = "seirobotics,sei510", "amlogic,g12a"; @@ -15,10 +17,36 @@ serial0 = &uart_AO; }; + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + chosen { stdout-path = "serial0:115200n8"; }; + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; @@ -31,6 +59,35 @@ no-map; }; }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddao_3v3_t: regultor-vddao_3v3_t { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3_T"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vddio_ao1v8: regulator-vddio_ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + }; &uart_AO { -- cgit v1.2.3 From 26c609d5d219cf52191580acf3fc0f2884f624b4 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:41 +0100 Subject: arm64: dts: allwinner: a64: Fix the TCON output clock Even though we shouldn't really have any external user of the clock provided by the TCON, if clock-output-names is set, then #clock-cells must be there as well. Fix this. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index ccd143d82aea..215ebb17ed8f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -352,6 +352,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; -- cgit v1.2.3 From d41a43a0d365e5427efbc4ab4054fb3922994692 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:46 +0100 Subject: arm64: dts: allwinner: a64: Fix display pipeline endpoints Commit a7f7047ffcee ("arm64: dts: allwinner: a64: Add cross links for the mixers") introduced a few errors while fixing the cross links. Make sure to correct them. Fixes: a7f7047ffcee ("arm64: dts: allwinner: a64: Add cross links for the mixers") Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 215ebb17ed8f..f1c93cdbf68d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -282,6 +282,8 @@ #size-cells = <0>; mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; mixer1_out_tcon0: endpoint@0 { @@ -372,7 +374,7 @@ tcon0_in_mixer1: endpoint@1 { reg = <1>; - remote-endpoint = <&mixer1_out_tcon1>; + remote-endpoint = <&mixer1_out_tcon0>; }; }; -- cgit v1.2.3 From 562bf19611c000cb7219431c3cc78aa60c2b371e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:50 +0100 Subject: arm64: dts: allwinner: a64: Add missing PIO clocks The pinctrl binding mandates that we have the three clocks fed into the PIO described. Even though the old case is still supported for backward compatibility, we should update our DTs to fix this. Fixes: 6bc37fac30cf ("arm64: dts: add Allwinner A64 SoC .dtsi") Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index f1c93cdbf68d..ef5b69f182f0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -583,7 +583,8 @@ interrupts = , , ; - clocks = <&ccu 58>; + clocks = <&ccu 58>, <&osc24M>, <&rtc 0>; + clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; -- cgit v1.2.3 From 54eac67bbe3af1f6ad95bd656cf332c7f23dda78 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:51 +0100 Subject: arm64: dts: allwinner: Fix pinctrl node names Some pinctrl node names for the A64 and H6 do not follow the convention that we switched to and enforced, most notably by using underscores in node names, which also trigger a DTC warning. Let's change that. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++------------ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 6 +++--- 2 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index ef5b69f182f0..5f7e783cf1e9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -596,12 +596,12 @@ function = "csi"; }; - i2c0_pins: i2c0_pins { + i2c0_pins: i2c0-pins { pins = "PH0", "PH1"; function = "i2c0"; }; - i2c1_pins: i2c1_pins { + i2c1_pins: i2c1-pins { pins = "PH2", "PH3"; function = "i2c1"; }; @@ -638,19 +638,19 @@ bias-pull-up; }; - pwm_pin: pwm_pin { + pwm_pin: pwm-pin { pins = "PD22"; function = "pwm"; }; - rmii_pins: rmii_pins { + rmii_pins: rmii-pins { pins = "PD10", "PD11", "PD13", "PD14", "PD17", "PD18", "PD19", "PD20", "PD22", "PD23"; function = "emac"; drive-strength = <40>; }; - rgmii_pins: rgmii_pins { + rgmii_pins: rgmii-pins { pins = "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD15", "PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23"; @@ -658,17 +658,17 @@ drive-strength = <40>; }; - spdif_tx_pin: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PH8"; function = "spdif"; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; - spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PD0", "PD1", "PD2", "PD3"; function = "spi1"; }; @@ -678,12 +678,12 @@ function = "uart0"; }; - uart1_pins: uart1_pins { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; - uart1_rts_cts_pins: uart1_rts_cts_pins { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; @@ -1095,12 +1095,12 @@ function = "s_i2c"; }; - r_pwm_pin: pwm { + r_pwm_pin: r-pwm-pin { pins = "PL10"; function = "s_pwm"; }; - r_rsb_pins: rsb { + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index e6cbe01e5558..91fecab58836 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -217,7 +217,7 @@ interrupt-controller; #interrupt-cells = <3>; - ext_rgmii_pins: rgmii_pins { + ext_rgmii_pins: rgmii-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD19", "PD20"; @@ -247,7 +247,7 @@ bias-pull-up; }; - uart0_ph_pins: uart0-ph { + uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; }; @@ -625,7 +625,7 @@ interrupt-controller; #interrupt-cells = <3>; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; -- cgit v1.2.3 From 75f9a058838be9880afd75c4cb14e1bf4fe34a0b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:35 +0100 Subject: ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry Some nodes still have pinctrl-names entry, yet they don't have any pinctrl group anymore. Drop them. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 3 --- arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 1 - arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 1 - arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 3 --- arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts | 1 - arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi | 1 - arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts | 3 --- arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 1 - 8 files changed, 14 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 1db2541135a7..c38a806191df 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -28,7 +28,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-zero:red:pwr"; @@ -39,7 +38,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -67,7 +65,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index 4ec94d72f021..aee666b59b01 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -64,7 +64,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index c834048c325e..f2f7b7a92571 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -79,7 +79,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; }; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index 3bed375b9c03..f9958c5a5c8c 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -69,7 +69,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -80,7 +79,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -101,7 +99,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc 1>; clock-names = "ext_clock"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index 85e7993a74e7..342fa4a577ea 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -46,7 +46,6 @@ vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; - pinctrl-names = "default"; regulator-name = "vdd-cpux"; regulator-type = "voltage"; regulator-boot-on; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index e4d50373c8ef..82f4b44d525f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -21,7 +21,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 506e25ba028a..75c95125e894 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -78,7 +78,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -96,7 +95,6 @@ vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; - pinctrl-names = "default"; regulator-name = "vdd-cpux"; regulator-type = "voltage"; regulator-boot-on; @@ -112,7 +110,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ post-power-on-delay-ms = <200>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index 53c8c11620e0..fb6ddca6e373 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -78,7 +78,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; }; -- cgit v1.2.3 From a4dc791974e568a15f7f37131729b1a6912f4811 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:52 +0100 Subject: ARM: dts: sun8i: h3: Refactor the pinctrl node names The H3 and H5 have never been converted to the new convention we want to have for the pinctrl nodes. Convert them. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 2 +- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 2 +- arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 6 ++-- arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts | 4 +-- arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 2 +- arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 2 +- arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 2 +- arch/arm/boot/dts/sun8i-h3-nanopi.dtsi | 2 +- arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 4 +-- arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts | 4 +-- arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 2 +- arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 4 +-- arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 2 +- arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts | 2 +- arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 4 +-- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 38 +++++++++++----------- arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi | 4 +-- .../sun50i-h5-emlid-neutis-n5-devboard.dts | 2 +- .../dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts | 2 +- .../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts | 2 +- .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts | 4 +-- .../dts/allwinner/sun50i-h5-orangepi-prime.dts | 4 +-- .../dts/allwinner/sun50i-h5-orangepi-zero-plus.dts | 2 +- .../allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +- 24 files changed, 52 insertions(+), 52 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index c38a806191df..0e5f0eec3810 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -112,7 +112,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 84cd9c061227..4970eda2877e 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -178,7 +178,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 25540b7694d5..6277f13f3eb3 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -142,7 +142,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -193,13 +193,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts index 2c952eacfef5..6d626ec1f747 100644 --- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts +++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts @@ -84,7 +84,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -120,7 +120,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index aee666b59b01..4ba533b0340f 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -120,7 +120,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts index 9412668bb888..69243dcb30a6 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -93,7 +93,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts index 6246d3eff39d..07867a0d569b 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -105,7 +105,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index f110ee382239..660bcf497926 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -125,7 +125,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index f1fc6bdca8be..e22c175bb515 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -152,7 +152,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -210,7 +210,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 476ae8e387ca..ceda02d8e65f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -126,7 +126,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -181,7 +181,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 245fd658defb..333aebd732b6 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -192,7 +192,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 46240334128f..3190a8be0073 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -152,7 +152,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -229,7 +229,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index f2f7b7a92571..b8f46e2802fd 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -134,6 +134,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts index 51bd2c00bbae..4738f3a9efe4 100644 --- a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts +++ b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts @@ -100,7 +100,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index f9958c5a5c8c..39263e74fbb5 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -150,7 +150,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -207,7 +207,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 395521e83ee7..8a79d3b04069 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -386,14 +386,14 @@ interrupt-controller; #interrupt-cells = <3>; - csi_pins: csi { + csi_pins: csi-pins { pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11"; function = "csi"; }; - emac_rgmii_pins: emac0 { + emac_rgmii_pins: emac-rgmii-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD12", "PD13", "PD15", "PD16", "PD17"; @@ -401,22 +401,22 @@ drive-strength = <40>; }; - i2c0_pins: i2c0 { + i2c0_pins: i2c0-pins { pins = "PA11", "PA12"; function = "i2c0"; }; - i2c1_pins: i2c1 { + i2c1_pins: i2c1-pins { pins = "PA18", "PA19"; function = "i2c1"; }; - i2c2_pins: i2c2 { + i2c2_pins: i2c2-pins { pins = "PE12", "PE13"; function = "i2c2"; }; - mmc0_pins: mmc0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -424,7 +424,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -432,7 +432,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -442,47 +442,47 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PA17"; function = "spdif"; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; - spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PA15", "PA16", "PA14", "PA13"; function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pa_pins: uart0-pa-pins { pins = "PA4", "PA5"; function = "uart0"; }; - uart1_pins: uart1 { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; - uart1_rts_cts_pins: uart1_rts_cts { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; - uart2_pins: uart2 { + uart2_pins: uart2-pins { pins = "PA0", "PA1"; function = "uart2"; }; - uart3_pins: uart3 { + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; }; - uart3_rts_cts_pins: uart3_rts_cts { + uart3_rts_cts_pins: uart3-rts-cts-pins { pins = "PA15", "PA16"; function = "uart3"; }; @@ -860,12 +860,12 @@ interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir { + r_ir_rx_pin: r-ir-rx-pin { pins = "PL11"; function = "s_cir_rx"; }; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi index 1eadc132390c..19b3b23cfaa8 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -167,7 +167,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -205,7 +205,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index 342fa4a577ea..62409afbaf06 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -132,7 +132,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 75c95125e894..9887948d5c86 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -188,7 +188,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index cc268a69786c..57a6f45036c1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -142,7 +142,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 3e0d5a9c096d..e126c1c9f05c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -180,7 +180,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -221,7 +221,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index b75ca4d7d001..d9b3ed257088 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -187,7 +187,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -224,7 +224,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts index 1238de25a969..db6ea7b58999 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts @@ -127,7 +127,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index fb6ddca6e373..dacf61399527 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -133,7 +133,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; -- cgit v1.2.3 From a05ea40eb384e28205ed7200384f55cf210d8b63 Mon Sep 17 00:00:00 2001 From: Jacky Bai Date: Fri, 22 Mar 2019 09:40:29 +0000 Subject: arm64: dts: imx: Add i.mx8mm dtsi support The i.MX8M Mini is new SOC of the i.MX8M family. it is focused on delivering the latest and greatest video and audio experience combining state-of-the-art media-specific features with high-performance processing while optimized for lowest power consumption. The i.MX 8M Mini Media Applications Processor is 14nm FinFET product of the growing i.MX8M family targeting the consumer & industrial market. It is built in 14LPP to achieve both high performance and low power consumption and relies on a powerful fully coherent core complex based on a quad Cortex-A53 cluster with video and graphics accelerators This patch adds the basic dtsi support for i.MX8MM. Signed-off-by: Jacky Bai Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 703 ++++++++++++++++++++++++++++++ 1 file changed, 703 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm.dtsi (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi new file mode 100644 index 000000000000..de3498c2dd44 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include +#include +#include +#include +#include + +#include "imx8mm-pinfunc.h" + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , /* Physical Secure */ + , /* Physical Non-Secure */ + , /* Virtual */ + ; /* Hypervisor */ + clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + aips1: bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + + sdma2: dma-controller@302c0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, + <&clk IMX8MM_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma3: dma-controller@302b0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302b0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, + <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; + /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = , + ; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = ; + linux,keycode = ; + wakeup-source; + }; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx8mm-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = ; + #reset-cells = <1>; + }; + }; + + aips2: bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, + <&clk IMX8MM_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, + <&clk IMX8MM_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, + <&clk IMX8MM_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, + <&clk IMX8MM_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a20000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a30000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a50000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_UART4_ROOT>, + <&clk IMX8MM_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC3_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sdma1: dma-controller@30bd0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, + <&clk IMX8MM_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = , + , + ; + clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_TIMER>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_SYS_PLL2_100M>, + <&clk IMX8MM_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + + }; + + aips4: bus@32c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbotg1: usb@32e40000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e40000 0x200>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + status = "disabled"; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc1: usbmisc@32e40200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e40200 0x200>; + }; + + usbotg2: usb@32e50000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e50000 0x200>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + status = "disabled"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc2: usbmisc@32e50200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e50200 0x200>; + }; + + }; + + dma_apbh: dma-controller@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = , + , + , + ; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: nand-controller@33002000{ + compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = ; + interrupt-names = "bch"; + clocks = <&clk IMX8MM_CLK_NAND_ROOT>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3 From 547e12325d0e5ebe8f40e410f8de10a114f70db5 Mon Sep 17 00:00:00 2001 From: Jacky Bai Date: Fri, 22 Mar 2019 09:40:41 +0000 Subject: arm64: dts: imx: Add i.mx8mm evk basic dts support Add basic dts support for i.MM8MM LPDDR4 EVK. Signed-off-by: Jacky Bai Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 235 +++++++++++++++++++++++++++ 2 files changed, 236 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evk.dts (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 13604e558dc1..984554343c83 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -20,5 +20,6 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts new file mode 100644 index 000000000000..2d5d89475b76 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mm.dtsi" + +/ { + model = "FSL i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + at803x,led-act-blind-workaround; + at803x,eee-okay; + at803x,vddio-1p8v; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; -- cgit v1.2.3 From 0973c06bb8fb959a0ccf1dc25cdaed8cff2e1059 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:55 +0100 Subject: arm64: dts: allwinner: a64: Add default dr_mode The USB OTG binding we have mandates to have a dr_mode property, yet not all boards are setting it. Since the generic otg binding states that the default mode should be the OTG mode, let's use that one in our DTSI. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 5f7e783cf1e9..179cef0a698a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -497,6 +497,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; -- cgit v1.2.3 From ac7fcfa1ecde5957c0c25d06dc4fff61e489b1aa Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 25 Mar 2019 14:52:59 +0100 Subject: arm64: dts: allwinner: a64: Fix the Codec I2S binding The I2S binding never mentions a reset-names property, or mentions which value it should have. To avoid any further issue, remove it. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 179cef0a698a..6f27eb082429 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -762,7 +762,6 @@ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; clock-names = "apb", "mod"; resets = <&ccu RST_BUS_CODEC>; - reset-names = "rst"; dmas = <&dma 15>, <&dma 15>; dma-names = "rx", "tx"; status = "disabled"; -- cgit v1.2.3 From e2fa79de7ecbef43c35ccd7fbd40b0fb3b16c767 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Mar 2019 22:42:48 +0900 Subject: arm64: dts: renesas: Update Ebisu and Draak bootargs Update Ebisu and Draak bootargs to match other boards Signed-off-by: Magnus Damm Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 +- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 0e873ccfd9e5..c72772589953 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index babca7cf23b9..25ae65294edd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; -- cgit v1.2.3 From de8e8daaf7190efd650bf9d6fed12927c660f235 Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Fri, 22 Mar 2019 10:25:02 +0100 Subject: arm64: dts: renesas: salvator-common: Sort node label This patch sorts the node label to improve maintainability. The sort has been done alphabetically with the node label name as the key. This patch does not include functional changes. Signed-off-by: Takeshi Kihara Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index a225c2457274..0e5a76fee5fc 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -719,6 +719,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; @@ -857,11 +862,6 @@ status = "okay"; }; -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; -- cgit v1.2.3 From 05f1d882d28b871f0c32a6307c7777fa834b2541 Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Wed, 13 Feb 2019 11:32:55 +0100 Subject: arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of August 24, 2018, the TX clock internal Delay mode does'nt support on R-Car D3. This patch fixes EthernetAVB phy mode to rgmii. This is achieved by simply dropping the phy-mode property from r8a77995-draak.dts as the default property for this for r8a77995, as set in r8a77995.dtsi, is "rgmii". Signed-off-by: Kazuya Mizuguchi Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman Tested-by: Ulrich Hecht --- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 25ae65294edd..a7dc11e36fd9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -168,7 +168,6 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { -- cgit v1.2.3 From 7a516e49d9753119e099fd924574a58e69c9ae84 Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Tue, 26 Mar 2019 18:58:26 +0900 Subject: arm64: dts: renesas: use extended audio dmac register Basic audio dmac register only supports busif from 0 to 3, in order to use busif4 ~ busif7, extended audio dmac register need to be used. This patch updates H3 (= r8a7795), M3-W (= r8a7796) and M3-N (=r8a77965) to use extended audio dmac register set. Signed-off-by: Jiada Wang Acked-by: Kuninori Morimoto Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index abeac3059383..55472b2b013e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1836,7 +1836,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 111f462cd708..d5e2f4af83a4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1775,7 +1775,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index f21e3a8bfbd8..d8b81721eb89 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1461,7 +1461,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, -- cgit v1.2.3 From e3414b8c45afa5cdfb1ffd10f5334da3458c4aa5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 19 Aug 2018 22:44:55 +0300 Subject: arm64: dts: renesas: salvator-common: Add GPIO keys support The Salvator-X and XS boards have a 4 lines DIP switch and 3 push buttons connected to SoC GPIOs, meant to be used as general-purpose test keys. Add a corresponding node in DT, mapping (semi-randomly) the DIP switch to keys 1-4 and the push buttons to keys A-C. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 63 ++++++++++++++++++++++++ 1 file changed, 63 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 0e5a76fee5fc..2dba1328acfa 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -29,6 +29,7 @@ */ #include +#include / { aliases { @@ -86,6 +87,63 @@ }; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 23 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-a { + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "TSW0"; + wakeup-source; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "TSW1"; + wakeup-source; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "TSW2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + reg_1p8v: regulator0 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -572,6 +630,11 @@ function = "intc_ex"; }; + keys_pins: keys { + pins = "GP_5_17", "GP_5_20", "GP_5_22"; + bias-pull-up; + }; + pwm1_pins: pwm1 { groups = "pwm1_a"; function = "pwm1"; -- cgit v1.2.3 From a3eec13b8fd2b9791a21fa16e38dfea8111579bf Mon Sep 17 00:00:00 2001 From: Christoph Muellner Date: Fri, 22 Mar 2019 12:38:06 +0100 Subject: arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller. When using direct commands (DCMDs) on an RK3399, we get spurious CQE completion interrupts for the DCMD transaction slot (#31): [ 931.196520] ------------[ cut here ]------------ [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 [ 931.206909] Modules linked in: [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1 [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) [ 931.206927] pc : cqhci_irq+0x2e4/0x490 [ 931.206931] lr : cqhci_irq+0x2e4/0x490 [ 931.206933] sp : ffff00000e54bc80 [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 [ 931.206953] x21: 0000000000000002 x20: 000000000000001f [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 [ 931.207001] Call trace: [ 931.207005] cqhci_irq+0x2e4/0x490 [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 [ 931.207013] sdhci_irq+0x98/0x930 [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 [ 931.207023] irq_thread+0x114/0x1c0 [ 931.207027] kthread+0x128/0x130 [ 931.207032] ret_from_fork+0x10/0x20 [ 931.207035] ---[ end trace 0000000000000002 ]--- The driver shows this message only for the first spurious interrupt by using WARN_ONCE(). Changing this to WARN() shows, that this is happening quite frequently (up to once a second). Since the eMMC 5.1 specification, where CQE and CQHCI are specified, does not mention that spurious TCN interrupts for DCMDs can be simply ignored, we must assume that using this feature is not working reliably. The current implementation uses DCMD for REQ_OP_FLUSH only, and I could not see any performance/power impact when disabling this optional feature for RK3399. Therefore this patch disables DCMDs for RK3399. Signed-off-by: Christoph Muellner Signed-off-by: Philipp Tomsich Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org [the corresponding code changes are queued for 5.2 so doing that as well] Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 0301e3e01b38..ce6f9de5caae 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -339,6 +339,7 @@ phys = <&emmc_phy>; phy-names = "phy_arasan"; power-domains = <&power RK3399_PD_EMMC>; + disable-cqe-dcmd; status = "disabled"; }; -- cgit v1.2.3 From fb8b7460c9950001b923da446f393c452d0ccf09 Mon Sep 17 00:00:00 2001 From: Christoph Muellner Date: Fri, 22 Mar 2019 12:34:52 +0100 Subject: arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy. A previous patch introduced the property 'drive-impedance-ohm' for the RK3399's emmc phy node. This patch sets this value explicitly to the default value of 50 Ohm. Signed-off-by: Christoph Muellner Signed-off-by: Philipp Tomsich Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index ce6f9de5caae..382297ecfefa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1457,6 +1457,7 @@ clock-names = "refclk"; #phy-cells = <1>; resets = <&cru SRST_PCIEPHY>; + drive-impedance-ohm = <50>; reset-names = "phy"; status = "disabled"; }; -- cgit v1.2.3 From b4e1728232d64b8040dae9b5405cf2db7ebd4e8b Mon Sep 17 00:00:00 2001 From: Christoph Muellner Date: Fri, 22 Mar 2019 12:34:53 +0100 Subject: arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma The RK3399-Q7 (Puma) requires 33 Ohm drive strength to ensure signal integrity at HS-400 (200MHz clock, DDR signalling). A repeated EMC testing run validates that this increase does not negatively impact EMC compliance (emissions have ample distance to the regulatory limits). Signed-off-by: Christoph Muellner Signed-off-by: Philipp Tomsich Tested-by: Jakob Unterwurzacher Tested-by: Klaus Goger Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 0130b9f98c9d..4f75bb6b2f14 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -146,6 +146,7 @@ &emmc_phy { status = "okay"; + drive-impedance-ohm = <33>; }; &gmac { -- cgit v1.2.3 From f95f57e4372207ede83ac28f300aba719b271ed5 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Thu, 13 Dec 2018 10:32:00 -0800 Subject: arm64: dts: qcom: qcs404: Fix regulator supply names The regulator definition got their supply names cleaned up during upstreaming, so they no longer match the driver defined names. Update the supply names. Also fill out the missing voltage of SMPS 5. Fixes: 0b363f5b871c ("arm64: dts: qcom: qcs404: Add PMS405 RPM regulators") Reported-by: Nicolas Dechesne Reviewed-by: Niklas Cassel Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 50b3589c7f15..536f735243d2 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -37,18 +37,18 @@ pms405-regulators { compatible = "qcom,rpm-pms405-regulators"; - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-l1-l2-supply = <&vreg_s5_1p35>; - vdd-l3-l8-supply = <&vreg_s5_1p35>; - vdd-l4-supply = <&vreg_s5_1p35>; - vdd-l5-l6-supply = <&vreg_s4_1p8>; - vdd-l7-supply = <&vph_pwr>; - vdd-l9-supply = <&vreg_s5_1p35>; - vdd-l10-l11-l12-l13-supply = <&vph_pwr>; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_l1_l2-supply = <&vreg_s5_1p35>; + vdd_l3_l8-supply = <&vreg_s5_1p35>; + vdd_l4-supply = <&vreg_s5_1p35>; + vdd_l5_l6-supply = <&vreg_s4_1p8>; + vdd_l7-supply = <&vph_pwr>; + vdd_l9-supply = <&vreg_s5_1p35>; + vdd_l10_l11_l12_l13-supply = <&vph_pwr>; vreg_s4_1p8: s4 { regulator-min-microvolt = <1728000>; @@ -56,8 +56,8 @@ }; vreg_s5_1p35: s5 { - regulator-min-microvolt = <>; - regulator-max-microvolt = <>; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; }; vreg_l1_1p3: l1 { -- cgit v1.2.3 From 71f1fdd9c300a92027126dfab5db7125dc4e283d Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Mon, 11 Mar 2019 16:06:02 +0200 Subject: arm64: dts: sdm845: Include the interconnect resources DT header Include the device tree header for the on-chip interconnect endpoint resources on sdm845 devices. This will allow using the "interconnects" property in DT nodes to describe the interconnect path resources they use. The sdm845 interconnect provider DT node is already present, but the header file with the resources is not included, so let's fix this. Reviewed-by: Evan Green Signed-off-by: Georgi Djakov Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 5308f1671824..be4d4c5859c0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 4dfa70ea0f74bd4fd819292fe950f734ffe47c86 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Sun, 24 Mar 2019 22:02:04 +0530 Subject: arm64: dts: qcom: qcs404: Add Ethernet node Add the ethernet node found in QCS404 platform. Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index e8fd26633d57..32f2f51bbf7f 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -479,6 +479,27 @@ status = "okay"; }; + ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + wifi: wifi@a000000 { compatible = "qcom,wcn3990-wifi"; reg = <0xa000000 0x800000>; -- cgit v1.2.3 From 0253735f503ac502fa775e96375d2f6c192bfe07 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Sun, 24 Mar 2019 22:02:05 +0530 Subject: arm64: dts: qcom: qcs404: Enable ethernet for EVB-4000 EVB-4000 comes with ethernet so enable it and add pinctrl bindings. Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 82 ++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 11269ad3de0d..8234cff414de 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -3,9 +3,91 @@ /dts-v1/; +#include #include "qcs404-evb.dtsi" / { model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; compatible = "qcom,qcs404-evb"; }; + +ðernet { + status = "ok"; + + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x4>; + }; + }; +}; + +&tlmm { + ethernet_defaults: ethernet-defaults { + int { + pins = "gpio61"; + function = "rgmii_int"; + bias-disable; + drive-strength = <2>; + }; + mdc { + pins = "gpio76"; + function = "rgmii_mdc"; + bias-pull-up; + }; + mdio { + pins = "gpio75"; + function = "rgmii_mdio"; + bias-pull-up; + }; + tx { + pins = "gpio67", "gpio66", "gpio65", "gpio64"; + function = "rgmii_tx"; + bias-pull-up; + drive-strength = <16>; + }; + rx { + pins = "gpio73", "gpio72", "gpio71", "gpio70"; + function = "rgmii_rx"; + bias-disable; + drive-strength = <2>; + }; + tx-ctl { + pins = "gpio68"; + function = "rgmii_ctl"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ctl { + pins = "gpio74"; + function = "rgmii_ctl"; + bias-disable; + drive-strength = <2>; + }; + tx-ck { + pins = "gpio63"; + function = "rgmii_ck"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ck { + pins = "gpio69"; + function = "rgmii_ck"; + bias-disable; + drive-strength = <2>; + }; + }; +}; -- cgit v1.2.3 From 331ab98f8c4a38b804ec65bd99fbef07614950a3 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Sun, 24 Mar 2019 22:02:06 +0530 Subject: arm64: dts: qcom: qcs404: Fix voltages l3 PMS405 L3 is outside the acceptable range, causing PCIe to fail. Fix these. Signed-off-by: Bjorn Andersson Signed-off-by: Khasim Syed Mohammed Signed-off-by: Vinod Koul [bjorn: Hunk fixing up S5 already applied, updated commit message] Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 536f735243d2..bdb26a5b103d 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -71,7 +71,7 @@ }; vreg_l3_1p05: l3 { - regulator-min-microvolt = <976000>; + regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1160000>; }; -- cgit v1.2.3 From 6703a27327ddc7375c922ffeeffcc48a6bc98720 Mon Sep 17 00:00:00 2001 From: Khasim Syed Mohammed Date: Sun, 24 Mar 2019 22:02:09 +0530 Subject: arm64: dts: qcom: qcs404: Remove default setting of controlled-remotely for BAM DMA The property controlled-remotely should not be set by default for qcs-404 device, it should be set based on the secure boot options (TZ or ATF) preferred by the platform. Hence, the controlled-remotely property is moved to platform specific dts files. Signed-off-by: Khasim Syed Mohammed Signed-off-by: Srinivas Kandagatla Signed-off-by: Bjorn Andersson Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 8 ++++++++ arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 -- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index bdb26a5b103d..985f6004b729 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -21,6 +21,14 @@ }; }; +&blsp1_dma { + qcom,controlled-remotely; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + &remoteproc_adsp { status = "ok"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 32f2f51bbf7f..ffedf9640af7 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -435,7 +435,6 @@ clocks = <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; - qcom,controlled-remotely = <1>; qcom,ee = <0>; status = "okay"; }; @@ -680,7 +679,6 @@ clocks = <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; - qcom,controlled-remotely = <1>; qcom,ee = <0>; status = "disabled"; }; -- cgit v1.2.3 From 695942de1da7a095f1dc8742fc94acf864eb4f18 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Mon, 25 Feb 2019 13:17:44 +0100 Subject: arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load The UFS host controller driver needs to set the load on 3 power rails (l20, l26, s4) but the operation fails silently unless we specify the regulator-allow-set-load property in the corresponding DT nodes. Tested-by: Lee Jones Reviewed-by: Jeffrey Hugo Signed-off-by: Marc Gonzalez Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index f0901067b043..19775cae1381 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -111,6 +111,7 @@ vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-allow-set-load; }; vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; @@ -195,6 +196,7 @@ vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; + regulator-allow-set-load; }; vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; @@ -221,6 +223,7 @@ vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-allow-set-load; }; vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; -- cgit v1.2.3 From cd3dbe2a4e6cedec80e6d1f07aea8bcbef365170 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Mon, 25 Feb 2019 13:18:43 +0100 Subject: arm64: dts: qcom: msm8998: Add UFS nodes Add host controller and PHY DT nodes. Tested-by: Lee Jones Signed-off-by: Marc Gonzalez Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 19 +++++++++ arch/arm64/boot/dts/qcom/msm8998.dtsi | 65 +++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 19775cae1381..6329ba4777cc 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -270,6 +270,25 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&ufshc { + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14600>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + &usb3 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3fd0769fe648..3d0aeb3211de 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -983,6 +983,71 @@ redistributor-stride = <0x0 0x20000>; interrupts = ; }; + + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x01da4000 0x2500>; + interrupts = ; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,msm8998-qmp-ufs-phy"; + reg = <0x01da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock-names = + "ref", + "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x01da7400 0x128>, + <0x01da7600 0x1fc>, + <0x01da7c00 0x1dc>, + <0x01da7800 0x128>, + <0x01da7a00 0x1fc>; + #phy-cells = <0>; + }; + }; }; }; -- cgit v1.2.3 From a60a072c5e7fa49ca3ae5bb45b6038fd05b84295 Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Tue, 26 Mar 2019 22:29:33 +0530 Subject: arm64: dts: qcom: pms405: add spmi regulators The PMS405 sports 5 SMPS and 13 LDO regulators, add the regulators to pms405 DTS. Signed-off-by: Jorge Ramirez-Ortiz Signed-off-by: Khasim Syed Mohammed Signed-off-by: Vinod Koul [bjorn: updated label] Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pms405.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 1bb836d1e8aa..e8e186bc1ea7 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -131,4 +131,15 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; }; + + pms405_1: pms405@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pms405_spmi_regulators: regulators { + compatible = "qcom,pms405-regulators"; + }; + }; }; -- cgit v1.2.3 From 8faea8edbb35c09d1c3b23d7e8f1459cea40ab6b Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Tue, 26 Mar 2019 22:29:34 +0530 Subject: arm64: dts: qcom: qcs404-evb: add spmi regulators Define the EVB pms405_s3 supplies. Signed-off-by: Jorge Ramirez-Ortiz Signed-off-by: Khasim Syed Mohammed Signed-off-by: Vinod Koul Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 985f6004b729..62c47ca31c9d 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -29,6 +29,18 @@ qcom,controlled-remotely; }; +&pms405_spmi_regulators { + vdd_s3-supply = <&pms405_s3>; + + pms405_s3: s3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd_apc"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1352000>; + }; +}; + &remoteproc_adsp { status = "ok"; }; -- cgit v1.2.3 From 60f77ae7d1c1ffbc5af34c5b1a7f3f7ecc52637c Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 4 Mar 2019 23:08:23 -0800 Subject: arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth Enable blsp1_uart3, define its pinconf and add the bluetooth node. It seems provisioning is lacking a valid BD address, preventing the interface from initializing, so provide a dummy for now. Tested-by: Vinod Koul Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 45 ++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 62c47ca31c9d..2c3127167e3c 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -7,6 +7,7 @@ / { aliases { serial0 = &blsp1_uart2; + serial1 = &blsp1_uart3; }; chosen { @@ -19,6 +20,32 @@ regulator-always-on; regulator-boot-on; }; + + vdd_ch0_3p3: + vdd_esmps3_3p3: vdd-esmps3-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "eSMPS3_3P3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l6_1p8>; + vddxo-supply = <&vreg_l5_1p8>; + vddrf-supply = <&vreg_l1_1p3>; + vddch0-supply = <&vdd_ch0_3p3>; + + local-bd-address = [ 02 00 00 00 5a ad ]; + + max-speed = <3200000>; + }; }; &blsp1_dma { @@ -225,3 +252,21 @@ bias-disable; }; }; + +&blsp1_uart3_default { + cts { + pins = "gpio84"; + bias-disable; + }; + + rts-tx { + pins = "gpio85", "gpio82"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio83"; + bias-pull-up; + }; +}; -- cgit v1.2.3 From 596a434369f6ed9339c398d36b44a680ad317de6 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 20 Mar 2019 13:39:45 +0530 Subject: arm64: dts: sdm845: Include rpmpd DT header In order to fix dependencies with rpmpd DT entries, the header was dropped and hardcoded values were added for opp-level, during the previous merge window. Add the header back in now and remove the hardcodings, effectively reverting commit '08585d21de9875a6064b350957faa0460a4c69a6: arm64: dts: sdm845: Fixup dependency on RPMPD includes' Signed-off-by: Rajendra Nayak Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index be4d4c5859c0..9f70b47a3dec 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -2099,43 +2100,43 @@ compatible = "operating-points-v2"; rpmhpd_opp_ret: opp1 { - opp-level = <16>; + opp-level = ; }; rpmhpd_opp_min_svs: opp2 { - opp-level = <48>; + opp-level = ; }; rpmhpd_opp_low_svs: opp3 { - opp-level = <64>; + opp-level = ; }; rpmhpd_opp_svs: opp4 { - opp-level = <128>; + opp-level = ; }; rpmhpd_opp_svs_l1: opp5 { - opp-level = <192>; + opp-level = ; }; rpmhpd_opp_nom: opp6 { - opp-level = <256>; + opp-level = ; }; rpmhpd_opp_nom_l1: opp7 { - opp-level = <320>; + opp-level = ; }; rpmhpd_opp_nom_l2: opp8 { - opp-level = <336>; + opp-level = ; }; rpmhpd_opp_turbo: opp9 { - opp-level = <384>; + opp-level = ; }; rpmhpd_opp_turbo_l1: opp10 { - opp-level = <416>; + opp-level = ; }; }; }; -- cgit v1.2.3 From cddbea8d3d055e39fedf849808a4fe5459cbd62b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 25 Mar 2019 12:19:59 -0300 Subject: arm64: dts: imx8mq: Move thermal-zones out of bus node thermal-zones node does not have any register properties and thus shouldn't be placed inside the bus. Move thermal-zones node from soc node to root node in order to fix the following build warning with W=1: arch/arm64/boot/dts/freescale/imx8mq.dtsi:305.18-364.6: Warning (simple_bus_reg): /soc@0/bus@30000000/thermal-zones: missing or empty reg/ranges property Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 122 +++++++++++++++--------------- 1 file changed, 61 insertions(+), 61 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 230f198ad87a..feb195984997 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -167,6 +167,67 @@ method = "smc"; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 1>; + + trips { + gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 2>; + + trips { + vpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , /* Physical Secure */ @@ -302,67 +363,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <2000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <80000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu-thermal { - polling-delay-passive = <250>; - polling-delay = <2000>; - thermal-sensors = <&tmu 1>; - - trips { - gpu-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - vpu-thermal { - polling-delay-passive = <250>; - polling-delay = <2000>; - thermal-sensors = <&tmu 2>; - - trips { - vpu-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - wdog1: watchdog@30280000 { compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; -- cgit v1.2.3 From 5fc670a87e31be7327ea4fa3865fc746965b867b Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Fri, 29 Mar 2019 13:22:57 -0500 Subject: arm64: dts: stratix10: increase QSPI max frequency to 100MHz The Stratix10 devkit's QSPI can support up to 100MHz. Cc: Thor Thayer Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index c26f11a2089a..d037563ad21c 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -160,7 +160,7 @@ #size-cells = <1>; compatible = "n25q00a"; reg = <0>; - spi-max-frequency = <50000000>; + spi-max-frequency = <100000000>; m25p,fast-read; cdns,page-size = <256>; -- cgit v1.2.3 From c9206b42ccbe339e1c72481cf9fefd3b26d79345 Mon Sep 17 00:00:00 2001 From: Guillaume La Roque Date: Mon, 25 Mar 2019 11:14:48 +0100 Subject: arm64: dts: meson-g12a-x96-max: add regulators Add system regulators for the X96 Max Set-Top-Box. Still missing * VDD_EE (0.8V - PWM controlled) * VDD_CPU (PWM controlled) Signed-off-by: Guillaume La Roque Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 0edbd00b358f..0ba28491e2b0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "meson-g12a.dtsi" +#include +#include / { compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; @@ -21,6 +23,71 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-low; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; }; &uart_AO { -- cgit v1.2.3 From c5c9c7cff2692d75a24761b081d717a78ad535c8 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:14:49 +0100 Subject: arm64: dts: meson-g12a-x96-max: Enable BT Module Enable the Bluetooth Module on the X96 Max Set-Top-Box. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 0ba28491e2b0..0a6919523ba9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -90,6 +90,18 @@ }; }; +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; -- cgit v1.2.3 From e2cffeb398f4830b004774444809ee256b9bc653 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 27 Mar 2019 11:21:57 +0100 Subject: arm64: dts: meson-g12a: Add CMA reserved memory In order to handle Video Output and later on Video decoding, add a reserved CMA pool with a similar 256MiB size as other SoCs. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 4d04742b05c2..d6ca0bbd8f74 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -79,6 +79,14 @@ reg = <0x0 0x05000000 0x0 0x300000>; no-map; }; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x10000000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; }; sm: secure-monitor { -- cgit v1.2.3 From 11f8e119ed22c750ac5ac0b195b5ecd17868e0e9 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Fri, 15 Mar 2019 14:56:55 +0100 Subject: arm64: dts: meson-gxm: Add Mali-T820 node The Amlogic Meson GXM SoC embeds an ARM Mali T820 GPU. This patch adds the node with all the needed properties to power on the GPU. This has been tested with the work-in-progress PanFrost project aiming support for ARM Mali Midgard and later GPUs. Signed-off-by: Christian Hewitt Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index ed3a3d5adf31..7a85a82bf65d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -91,6 +91,33 @@ reset-names = "phy"; status = "okay"; }; + + mali: gpu@c0000 { + compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = , + , + ; + interrupt-names = "gpu", "mmu", "job"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; }; &clkc_AO { -- cgit v1.2.3 From c78d160d0520e0bc040076c83f6d30ac28d83f04 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 21 Mar 2019 02:27:06 +0000 Subject: arm64: dts: imx8qxp: add system controller watchdog support Add i.MX8QXP system controller watchdog support. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 0cb939861a60..a3fbbd8bb024 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -481,4 +481,9 @@ power-domains = <&pd IMX_SC_R_GPIO_7>; }; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; -- cgit v1.2.3 From b6c846b954c0b1a4b56215233484ed2240226f80 Mon Sep 17 00:00:00 2001 From: "Angus Ainslie (Purism)" Date: Fri, 29 Mar 2019 08:21:28 -0700 Subject: arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string Fix a typo in the compatible string Signed-off-by: Angus Ainslie (Purism) Reviewed-by: Daniel Baluta Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index feb195984997..e5f018289c14 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -763,7 +763,7 @@ }; sdma1: sdma@30bd0000 { - compatible = "fsl, imx8mq-sdma","fsl,imx7d-sdma"; + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x30bd0000 0x10000>; interrupts = ; clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, -- cgit v1.2.3 From 7240d7d41fd05e7d841a744cd2d77019d7b1286f Mon Sep 17 00:00:00 2001 From: "Angus Ainslie (Purism)" Date: Fri, 29 Mar 2019 08:21:30 -0700 Subject: arm64: dts: imx8mq: Change ahb clock for imx8mq Set ahb clock on sdma1 to get rid of "Timeout waiting for CH0" on the imx8mq. Signed-off-by: Angus Ainslie (Purism) Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index e5f018289c14..4300781558f6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -767,7 +767,7 @@ reg = <0x30bd0000 0x10000>; interrupts = ; clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, - <&clk IMX8MQ_CLK_SDMA1_ROOT>; + <&clk IMX8MQ_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; -- cgit v1.2.3 From ad68fa5fe8c12262cf4156b8e0726117aa3be8c8 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Fri, 1 Mar 2019 11:05:47 +0000 Subject: arm64: dts: renesas: cat874: Add USB-HOST support This patch adds USB 2.0 HOST support to the CAT874 board. Signed-off-by: Fabrizio Castro Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 42c66f9d8f96..013a48c01211 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -76,6 +76,11 @@ }; }; +&ehci0 { + dr_mode = "host"; + status = "okay"; +}; + &extal_clk { clock-frequency = <48000000>; }; @@ -93,6 +98,11 @@ }; }; +&ohci0 { + dr_mode = "host"; + status = "okay"; +}; + &pcie_bus_clk { clock-frequency = <100000000>; }; @@ -151,3 +161,8 @@ sd-uhs-sdr104; status = "okay"; }; + +&usb2_phy0 { + renesas,no-otg-pins; + status = "okay"; +}; -- cgit v1.2.3 From fcf041fbacbc205bfadf50b68ad550f26e1568f3 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Thu, 4 Apr 2019 13:01:46 -0400 Subject: arm64: dts: allwinner: h6: Add device node for SID The device tree binding already lists compatible strings for H6 SoC, so add a device node for it. Signed-off-by: Yangtao Li Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 91fecab58836..3e4bb0b0de69 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -203,6 +203,11 @@ #reset-cells = <1>; }; + sid: sid@3006000 { + compatible = "allwinner,sun50i-h6-sid"; + reg = <0x03006000 0x400>; + }; + pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; -- cgit v1.2.3 From 4b36daf9ada30a66c93f8701e8c6f23bc3ce94e2 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 3 Apr 2019 16:43:51 -0500 Subject: arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA Add the initial device tree files for Intel's Agilex SoCFPGA platform. Signed-off-by: Dinh Nguyen --- arch/arm64/Kconfig.platforms | 5 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/intel/Makefile | 1 + arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 444 +++++++++++++++++++++ arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 75 ++++ 5 files changed, 526 insertions(+) create mode 100644 arch/arm64/boot/dts/intel/Makefile create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex.dtsi create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts (limited to 'arch/arm64') diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 70498a033cf5..ca9f4422afa2 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -7,6 +7,11 @@ config ARCH_ACTIONS help This enables support for the Actions Semiconductor S900 SoC family. +config ARCH_AGILEX + bool "Intel's Agilex SoCFPGA Family" + help + This enables support for Intel's Agilex SoCFPGA Family. + config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 5bc7533a12c7..f19b762c008d 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -13,6 +13,7 @@ subdir-y += cavium subdir-y += exynos subdir-y += freescale subdir-y += hisilicon +subdir-y += intel subdir-y += lg subdir-y += marvell subdir-y += mediatek diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile new file mode 100644 index 000000000000..9606ac85ac70 --- /dev/null +++ b/arch/arm64/boot/dts/intel/Makefile @@ -0,0 +1 @@ +dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi new file mode 100644 index 000000000000..e4ceb3a73c81 --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019, Intel Corporation + */ + +/dts-v1/; +#include +#include + +/ { + compatible = "intel,socfpga-agilex"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x3>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 120 8>, + <0 121 8>, + <0 122 8>, + <0 123 8>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + interrupt-parent = <&intc>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + intc: intc@fffc1000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0xfffc1000 0x0 0x1000>, + <0x0 0xfffc2000 0x0 0x2000>, + <0x0 0xfffc4000 0x0 0x2000>, + <0x0 0xfffc6000 0x0 0x2000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges = <0 0 0 0xffffffff>; + + gmac0: ethernet@ff800000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff800000 0x2000>; + interrupts = <0 90 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; + iommus = <&smmu 1>; + status = "disabled"; + }; + + gmac1: ethernet@ff802000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff802000 0x2000>; + interrupts = <0 91 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; + iommus = <&smmu 2>; + status = "disabled"; + }; + + gmac2: ethernet@ff804000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff804000 0x2000>; + interrupts = <0 92 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; + iommus = <&smmu 3>; + status = "disabled"; + }; + + gpio0: gpio@ffc03200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03200 0x100>; + resets = <&rst GPIO0_RESET>; + status = "disabled"; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 110 4>; + }; + }; + + gpio1: gpio@ffc03300 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03300 0x100>; + resets = <&rst GPIO1_RESET>; + status = "disabled"; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 111 4>; + }; + }; + + i2c0: i2c@ffc02800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02800 0x100>; + interrupts = <0 103 4>; + resets = <&rst I2C0_RESET>; + status = "disabled"; + }; + + i2c1: i2c@ffc02900 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02900 0x100>; + interrupts = <0 104 4>; + resets = <&rst I2C1_RESET>; + status = "disabled"; + }; + + i2c2: i2c@ffc02a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02a00 0x100>; + interrupts = <0 105 4>; + resets = <&rst I2C2_RESET>; + status = "disabled"; + }; + + i2c3: i2c@ffc02b00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02b00 0x100>; + interrupts = <0 106 4>; + resets = <&rst I2C3_RESET>; + status = "disabled"; + }; + + i2c4: i2c@ffc02c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02c00 0x100>; + interrupts = <0 107 4>; + resets = <&rst I2C4_RESET>; + status = "disabled"; + }; + + mmc: dwmmc0@ff808000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff808000 0x1000>; + interrupts = <0 96 4>; + fifo-depth = <0x400>; + resets = <&rst SDMMC_RESET>; + reset-names = "reset"; + iommus = <&smmu 5>; + status = "disabled"; + }; + + ocram: sram@ffe00000 { + compatible = "mmio-sram"; + reg = <0xffe00000 0x40000>; + }; + + pdma: pdma@ffda0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffda0000 0x1000>; + interrupts = <0 81 4>, + <0 82 4>, + <0 83 4>, + <0 84 4>, + <0 85 4>, + <0 86 4>, + <0 87 4>, + <0 88 4>, + <0 89 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + rst: rstmgr@ffd11000 { + #reset-cells = <1>; + compatible = "altr,stratix10-rst-mgr"; + reg = <0xffd11000 0x100>; + }; + + smmu: iommu@fa000000 { + compatible = "arm,mmu-500", "arm,smmu-v2"; + reg = <0xfa000000 0x40000>; + #global-interrupts = <2>; + #iommu-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <0 128 4>, /* Global Secure Fault */ + <0 129 4>, /* Global Non-secure Fault */ + /* Non-secure Context Interrupts (32) */ + <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, + <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, + <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; + stream-match-mask = <0x7ff0>; + status = "disabled"; + }; + + spi0: spi@ffda4000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda4000 0x1000>; + interrupts = <0 99 4>; + resets = <&rst SPIM0_RESET>; + reg-io-width = <4>; + num-cs = <4>; + status = "disabled"; + }; + + spi1: spi@ffda5000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda5000 0x1000>; + interrupts = <0 100 4>; + resets = <&rst SPIM1_RESET>; + reg-io-width = <4>; + num-cs = <4>; + status = "disabled"; + }; + + sysmgr: sysmgr@ffd12000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd12000 0x500>; + }; + + /* Local timer */ + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + timer0: timer0@ffc03000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 113 4>; + reg = <0xffc03000 0x100>; + }; + + timer1: timer1@ffc03100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 114 4>; + reg = <0xffc03100 0x100>; + }; + + timer2: timer2@ffd00000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 115 4>; + reg = <0xffd00000 0x100>; + }; + + timer3: timer3@ffd00100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 116 4>; + reg = <0xffd00100 0x100>; + }; + + uart0: serial0@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x100>; + interrupts = <0 108 4>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst UART0_RESET>; + status = "disabled"; + }; + + uart1: serial1@ffc02100 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02100 0x100>; + interrupts = <0 109 4>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst UART1_RESET>; + status = "disabled"; + }; + + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0x40000>; + interrupts = <0 93 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; + iommus = <&smmu 6>; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0x40000>; + interrupts = <0 94 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; + iommus = <&smmu 7>; + status = "disabled"; + }; + + watchdog0: watchdog@ffd00200 { + compatible = "snps,dw-wdt"; + reg = <0xffd00200 0x100>; + interrupts = <0 117 4>; + resets = <&rst WATCHDOG0_RESET>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd00300 { + compatible = "snps,dw-wdt"; + reg = <0xffd00300 0x100>; + interrupts = <0 118 4>; + resets = <&rst WATCHDOG1_RESET>; + status = "disabled"; + }; + + watchdog2: watchdog@ffd00400 { + compatible = "snps,dw-wdt"; + reg = <0xffd00400 0x100>; + interrupts = <0 125 4>; + resets = <&rst WATCHDOG2_RESET>; + status = "disabled"; + }; + + watchdog3: watchdog@ffd00500 { + compatible = "snps,dw-wdt"; + reg = <0xffd00500 0x100>; + interrupts = <0 126 4>; + resets = <&rst WATCHDOG3_RESET>; + status = "disabled"; + }; + + sdr: sdr@f8011100 { + compatible = "altr,sdr-ctl", "syscon"; + reg = <0xf8011100 0xc0>; + }; + + qspi: spi@ff8d2000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff8d2000 0x100>, + <0xff900000 0x100000>; + interrupts = <0 3 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts new file mode 100644 index 000000000000..7814a9e8eb08 --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019, Intel Corporation + */ +#include "socfpga_agilex.dtsi" + +/ { + model = "SoCFPGA Agilex SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <900>; /* 0ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&mmc { + status = "okay"; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; -- cgit v1.2.3 From 757a4b2913eb46df23af9e151e2cdd326d4542b5 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Fri, 15 Feb 2019 11:19:55 +0530 Subject: arm64: dts: hisilicon: hi3670: Add reset controller support Add reset controller support for HiSilicon HI3670 SoC. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 2ed06e4588b8..bc8363bc3b9c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -151,6 +151,13 @@ #clock-cells = <1>; }; + crg_rst: crg_rst_controller { + compatible = "hisilicon,hi3670-reset", + "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&crg_ctrl>; + }; + pctrl: pctrl@e8a09000 { compatible = "hisilicon,hi3670-pctrl", "syscon"; reg = <0x0 0xe8a09000 0x0 0x1000>; -- cgit v1.2.3 From 570274cdba34c01fb1e84db3648cb22b258cc394 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Thu, 28 Feb 2019 21:15:10 +0530 Subject: arm64: dts: hisilicon: hi3670: Add MMC controller support Add MMC controller support for HiSilicon HI3670 SoC reusing the HI3660 Designware MMC driver. There are 2 DWMMC controllers present in this SoC: 1. DWMMC1 is used for SD card (SD) 2. DWMMC2 is used for WiFi (SDIO) Signed-off-by: Manivannan Sadhasivam Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 37 +++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index bc8363bc3b9c..30177543cc8f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -654,5 +654,42 @@ clocks = <&sctrl HI3670_PCLK_AO_GPIO6>; clock-names = "apb_pclk"; }; + + /* SD */ + dwmmc1: dwmmc1@ff37f000 { + compatible = "hisilicon,hi3670-dw-mshc", + "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff37f000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&crg_ctrl HI3670_CLK_GATE_SD>, + <&crg_ctrl HI3670_HCLK_GATE_SD>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 18>; + reset-names = "reset"; + hisilicon,peripheral-syscon = <&sctrl>; + card-detect-delay = <200>; + status = "disabled"; + }; + + /* SDIO */ + dwmmc2: dwmmc2@fc183000 { + compatible = "hisilicon,hi3670-dw-mshc", + "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xfc183000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>, + <&crg_ctrl HI3670_HCLK_GATE_SDIO>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 20>; + reset-names = "reset"; + card-detect-delay = <200>; + status = "disabled"; + }; }; }; -- cgit v1.2.3 From 1761101048a3144bf141359b15a6132c3d3cc001 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Thu, 28 Feb 2019 21:15:11 +0530 Subject: arm64: dts: hisilicon: hikey970: Add SD and WiFi support Add SD and WiFi support for HiKey970 board based on HI3670 SoC. Due to the absence of the PMIC driver, fixed regulators are sourced to make the driver working. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 75 ++++++++++++++ .../arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi | 115 +++++++++++++++++++++ 2 files changed, 190 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index c9775b66629f..7dac33d4fd5c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -8,6 +8,7 @@ */ /dts-v1/; +#include #include "hi3670.dtsi" #include "hikey970-pinctrl.dtsi" @@ -17,6 +18,8 @@ compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; aliases { + mshc1 = &dwmmc1; + mshc2 = &dwmmc2; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -35,6 +38,37 @@ /* expect bootloader to fill in this region */ reg = <0x0 0x0 0x0 0x0>; }; + + sd_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sd_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* GPIO_051_WIFI_EN */ + gpio = <&gpio6 3 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; }; /* @@ -354,6 +388,47 @@ "GPIO_231_HDMI_INT"; }; +&dwmmc1 { + bus-width = <0x4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + cap-sd-highspeed; + disable-wp; + cd-inverted; + cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; + vmmc-supply = <&sd_3v3>; + vqmmc-supply = <&sd_1v8>; + status = "okay"; +}; + +&dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; + broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; + /* WL_EN */ + vmmc-supply = <&wlan_en>; + status = "ok"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, GPIO_177_WL_WAKEUP_AP */ + interrupt-parent = <&gpio22>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; +}; + &uart0 { /* On High speed expansion header */ label = "HS-UART0"; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi index 67bb52d43619..d456b0aa6f58 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -196,6 +196,16 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 10 0>; + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SDIO_CLK */ + 0x004 MUX_M1 /* SDIO_CMD */ + 0x008 MUX_M1 /* SDIO_DATA0 */ + 0x00c MUX_M1 /* SDIO_DATA1 */ + 0x010 MUX_M1 /* SDIO_DATA2 */ + 0x014 MUX_M1 /* SDIO_DATA3 */ + >; + }; }; pmx6: pinmux@fc182800 { @@ -203,6 +213,52 @@ reg = <0x0 0xfc182800 0x0 0x028>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SDIO_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA DRIVE6_MASK + >; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SDIO_CMD */ + 0x008 0x0 /* SDIO_DATA0 */ + 0x00c 0x0 /* SDIO_DATA1 */ + 0x010 0x0 /* SDIO_DATA2 */ + 0x014 0x0 /* SDIO_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA DRIVE6_MASK + >; + }; }; pmx7: pinmux@ff37e000 { @@ -214,6 +270,17 @@ pinctrl-single,function-mask = <7>; /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SD_CLK */ + 0x004 MUX_M1 /* SD_CMD */ + 0x008 MUX_M1 /* SD_DATA0 */ + 0x00c MUX_M1 /* SD_DATA1 */ + 0x010 MUX_M1 /* SD_DATA2 */ + 0x014 MUX_M1 /* SD_DATA3 */ + >; + }; }; pmx8: pinmux@ff37e800 { @@ -221,6 +288,54 @@ reg = <0x0 0xff37e800 0x0 0x030>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SD_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA + DRIVE6_MASK + >; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SD_CMD */ + 0x008 0x0 /* SD_DATA0 */ + 0x00c 0x0 /* SD_DATA1 */ + 0x010 0x0 /* SD_DATA2 */ + 0x014 0x0 /* SD_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA + DRIVE6_MASK + >; + }; }; pmx1: pinmux@fff11000 { -- cgit v1.2.3 From 792cea3f48add8ed13febab52a616cb52c3c7c7a Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 4 Apr 2019 01:16:26 -0700 Subject: arm64: dts: hi3660: Add dma to uart nodes Try to add DMA support to the uart nodes following the assignments made in the dts from the victoria vendor kernel here: https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=p10&fileType=openSourceSoftware&pageSize=10&curPage=1 Cc: Tanglei Han Cc: Zhuangluan Su Cc: Ryan Grachek Cc: Manivannan Sadhasivam Cc: Wei Xu Cc: Rob Herring Cc: Mark Rutland Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Acked-by: Manivannan Sadhasivam Signed-off-by: John Stultz Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 2f19e0e5b7cf..a3eeab1e1283 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -478,6 +478,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf00000 0x0 0x1000>; interrupts = ; + dma-names = "rx", "tx"; + dmas = <&dma0 2 &dma0 3>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, <&crg_ctrl HI3660_CLK_GATE_UART1>; clock-names = "uartclk", "apb_pclk"; @@ -490,6 +492,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf03000 0x0 0x1000>; interrupts = ; + dma-names = "rx", "tx"; + dmas = <&dma0 4 &dma0 5>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; @@ -514,6 +518,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf01000 0x0 0x1000>; interrupts = ; + dma-names = "rx", "tx"; + dmas = <&dma0 6 &dma0 7>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, <&crg_ctrl HI3660_CLK_GATE_UART4>; clock-names = "uartclk", "apb_pclk"; @@ -526,6 +532,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf05000 0x0 0x1000>; interrupts = ; + dma-names = "rx", "tx"; + dmas = <&dma0 8 &dma0 9>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, <&crg_ctrl HI3660_CLK_GATE_UART5>; clock-names = "uartclk", "apb_pclk"; -- cgit v1.2.3 From c9726326006535d95556b19aae524db6f8f8cc5e Mon Sep 17 00:00:00 2001 From: Youlin Wang Date: Thu, 4 Apr 2019 01:16:27 -0700 Subject: arm64: dts: hi3660: Add hisi asp dma device Add asp-dma device to hi3660 dts Cc: Tanglei Han Cc: Zhuangluan Su Cc: Ryan Grachek Cc: Manivannan Sadhasivam Cc: Wei Xu Cc: Rob Herring Cc: Mark Rutland Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Acked-by: Manivannan Sadhasivam Signed-off-by: Youlin Wang Signed-off-by: Tanglei Han Signed-off-by: John Stultz Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index a3eeab1e1283..fb5498d177b9 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -567,6 +567,16 @@ dma-type = "hi3660_dma"; }; + asp_dmac: dma-controller@e804b000 { + compatible = "hisilicon,hisi-pcm-asp-dma-1.0"; + reg = <0x0 0xe804b000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + interrupts = ; + interrupt-names = "asp_dma_irq"; + }; + rtc0: rtc@fff04000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x0 0Xfff04000 0x0 0x1000>; -- cgit v1.2.3 From 6d09e003db3dd71587705eb5ac6ad0a5578705f8 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 4 Apr 2019 01:16:28 -0700 Subject: arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask A undocumented and unimplemented binding got into the hi3660 dtsi, and this switches that binding to the now documented one. Cc: Tanglei Han Cc: Zhuangluan Su Cc: Ryan Grachek Cc: Manivannan Sadhasivam Cc: Wei Xu Cc: Rob Herring Cc: Mark Rutland Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Signed-off-by: John Stultz Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index fb5498d177b9..aa6a8ad31be2 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -560,7 +560,7 @@ #dma-cells = <1>; dma-channels = <16>; dma-requests = <32>; - dma-min-chan = <1>; + dma-channel-mask = <0xfffe>; interrupts = ; clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>; dma-no-cci; -- cgit v1.2.3 From 6ba2e45d57afdfd982d12f168edd6a79a65075d8 Mon Sep 17 00:00:00 2001 From: Clément Péron Date: Mon, 8 Apr 2019 17:27:50 +0200 Subject: arm64: dts: allwinner: h6: move MMC pinctrl to dtsi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is only one pinmuxing available for each MMC controller. Move the pinctrl to the SOC Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 2 -- arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 ---- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 4 ++++ 3 files changed, 4 insertions(+), 6 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index b2526dac2fcf..62e27948a3fa 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -56,8 +56,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index bdb8470fc8dc..4802902e128f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -104,8 +104,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; bus-width = <4>; @@ -113,8 +111,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; vmmc-supply = <®_cldo1>; vqmmc-supply = <®_bldo2>; non-removable; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 3e4bb0b0de69..e0dc4a05c1ba 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -278,6 +278,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -306,6 +308,8 @@ resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 089bee8dd119ba084dee6b17a2e1a53df4f30193 Mon Sep 17 00:00:00 2001 From: Clément Péron Date: Mon, 8 Apr 2019 17:27:52 +0200 Subject: arm64: dts: allwinner: h6: Introduce Beelink GS1 board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211E - FN-Link 6222B-SRB Wifi/BT - 1x USB 2.0 Host and 1x USB 3.0 Host - HDMI port - S/PDIF Tx - IR receiver - 5V/2A DC power supply Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 260 +++++++++++++++++++++ 2 files changed, 261 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index e4dce2f6fa3a..2dd806a3d5c9 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts new file mode 100644 index 000000000000..0dc33c90dd60 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 Clément Péron + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include + +/ { + model = "Beelink GS1"; + compatible = "azw,beelink-gs1", "allwinner,sun50i-h6"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "beelink:white:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_aldo2>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_cldo1>; + vqmmc-supply = <®_bldo2>; + non-removable; + cap-mmc-hw-reset; + bus-width = <8>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_aldo1>; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + regulator-enable-ramp-delay = <100000>; + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc25-dram"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&r_pio { + /* + * PL0 and PL1 are used for PMIC I2C + * don't enable the pl-supply else + * it will fail at boot + * + * vcc-pl-supply = <®_aldo1>; + */ + vcc-pm-supply = <®_aldo1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + usb0_vbus-supply = <®_vcc5v>; + status = "okay"; +}; -- cgit v1.2.3 From 8fe62f1286311762ecc0066d3a7c7ea5042a5c32 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Tue, 9 Apr 2019 02:24:41 +0200 Subject: arm64: dts: allwinner: h6: Add Orange Pi 3 DTS Orange Pi 3 is a H6 based SBC made by Xulong, released in January 2019. It has the following features: - Allwinner H6 quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB or 2GB LPDDR3 RAM - AXP805 PMIC - AP6256 Wifi/BT 5.0 - USB 2.0 host port (A) - USB 2.0 micro usb, OTG - USB 3.0 Host + 4 port USB hub (GL3510) - Gigabit Ethernet (Realtek RTL8211E phy) - HDMI 2.0 port - soldered eMMC (optional) - 3x LED (one is on the bottom) - microphone - audio jack - PCIe Add basic support for the board. Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 215 +++++++++++++++++++++ 2 files changed, 216 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 2dd806a3d5c9..f6db0611cb85 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts new file mode 100644 index 000000000000..17d496990108 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 OndÅ™ej Jirman + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include + +/ { + model = "OrangePi 3"; + compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "orangepi:red:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + + status { + label = "orangepi:green:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdca>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-led-ir"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-audio-tv-ephy-mac"; + }; + + /* ALDO3 is shorted to CLDO1 */ + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18-dram-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-pc"; + }; + + bldo3 { + /* unused */ + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2"; + }; + + cldo2 { + /* unused */ + }; + + cldo3 { + /* unused */ + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + /* + * This board doesn't have a controllable VBUS even though it + * does have an ID pin. Using it as anything but a USB host is + * unsafe. + */ + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + status = "okay"; +}; -- cgit v1.2.3 From 503250482c9c7759ee7c5bdc5d4f5e703cb1b417 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:07 +0530 Subject: arm64: dts: msm8998: thermal: split address space into two We've earlier added support to split the register address space into TM and SROT regions. Split up the regmap address space into two for msm8998 that has a similar register layout. The order is important (TM before SROT) because we make an assumption that SROT is always the second address space in order to support legacy DTs. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3fd0769fe648..ac25e9142cbd 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -590,17 +590,19 @@ cell-index = <0>; }; - tsens0: thermal@10aa000 { + tsens0: thermal@10ab000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10aa000 0x2000>; + reg = <0x10ab000 0x1000>, /* TM */ + <0x10aa000 0x1000>; /* SROT */ #qcom,sensors = <12>; #thermal-sensor-cells = <1>; }; - tsens1: thermal@10ad000 { + tsens1: thermal@10ae000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ad000 0x2000>; + reg = <0x10ae000 0x1000>, /* TM */ + <0x10ad000 0x1000>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; -- cgit v1.2.3 From 86f93c93dd5005f0aeb8ce84c2113e21a6006c7d Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:08 +0530 Subject: arm64: dts: msm8998: efficiency is not valid property efficiency comes from downstream. The valid upstream property is capacity-dmips-mhz but until we can come up with those numbers, remove this property. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index ac25e9142cbd..0b6de0c29ee8 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -78,7 +78,6 @@ compatible = "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "arm,arch-cache"; @@ -97,7 +96,6 @@ compatible = "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { compatible = "arm,arch-cache"; @@ -112,7 +110,6 @@ compatible = "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { compatible = "arm,arch-cache"; @@ -127,7 +124,6 @@ compatible = "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { compatible = "arm,arch-cache"; @@ -142,7 +138,6 @@ compatible = "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "arm,arch-cache"; @@ -161,7 +156,6 @@ compatible = "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { compatible = "arm,arch-cache"; @@ -176,7 +170,6 @@ compatible = "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { compatible = "arm,arch-cache"; @@ -191,7 +184,6 @@ compatible = "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { compatible = "arm,arch-cache"; -- cgit v1.2.3 From f2e8b07c1b7265bd862d00a2fbb1e8b729f9eb16 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:09 +0530 Subject: arm64: dts: msm8916: thermal: Add sensor for modem On platforms that have a modem, sensor 0 monitors the modem. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0803ca8c02da..c8aa9a0986d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -278,7 +278,21 @@ type = "critical"; }; }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + trips { + modem_alert0: trip-point@0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; }; -- cgit v1.2.3 From 0f5f91f01cad1c8ab2ba81e4c6c805608bab3cd5 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:10 +0530 Subject: arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals msm8996 has a total of 21 temperature sensors. Populate DT with information about them. There are 2 sensors on each of the cpus - one on the top, the other below (we only expose one on the top in DT for now). For the GPU, we expose both, the one on the top and the one below. Depending on the version of the silicon, sensor 2 is either placed near the L3 cache or the venus video decoder. It would've been nice to be able to be version-specific but we don't have DTs that differentiate the two versions of silicon yet. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 150 ++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c761269caf80..e2408ee91184 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -237,6 +237,156 @@ }; }; }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + m4m-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + m4m_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + l3-or-venus-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + l3_or_venus_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cluster0_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cluster1_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + q6_dsp_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + modemtx_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; timer { -- cgit v1.2.3 From b67d9c5d6f4ae0bf745d380654ca4a18706c3103 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:11 +0530 Subject: arm64: dts: msm8998: thermal: Fix the cpu sensor numbers The silver cluster (typically cpu0-3) are monitored by sensor IDs 1-3 on tsens controller 0. The gold cluster (typically cpu4-7) are monitored by sensor IDs 7-10 on tsens controller 0. Fixes: 4449b6f248d9a1 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones") Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 0b6de0c29ee8..108a5aa146a2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -342,7 +342,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 6>; + thermal-sensors = <&tsens0 1>; trips { cpu_alert0: trip0 { @@ -363,7 +363,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 7>; + thermal-sensors = <&tsens0 2>; trips { cpu_alert1: trip0 { @@ -384,7 +384,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 8>; + thermal-sensors = <&tsens0 3>; trips { cpu_alert2: trip0 { @@ -405,7 +405,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 9>; + thermal-sensors = <&tsens0 4>; trips { cpu_alert3: trip0 { @@ -426,7 +426,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 10>; + thermal-sensors = <&tsens0 7>; trips { cpu_alert4: trip0 { @@ -447,7 +447,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 11>; + thermal-sensors = <&tsens0 8>; trips { cpu_alert5: trip0 { @@ -468,7 +468,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens1 0>; + thermal-sensors = <&tsens0 9>; trips { cpu_alert6: trip0 { @@ -489,7 +489,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens1 1>; + thermal-sensors = <&tsens0 10>; trips { cpu_alert7: trip0 { -- cgit v1.2.3 From 9284aa44a5145a5304c82aca978df2e266524e7d Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:12 +0530 Subject: arm64: dts: msm8998: thermal: Fix the gpu sensor number The GPU sensor is sensor ID 13 on controller 0 Fixes: 4449b6f248d9a1 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones") Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 108a5aa146a2..56ca9ecdb0bf 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -510,7 +510,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens1 3>; + thermal-sensors = <&tsens0 13>; }; }; -- cgit v1.2.3 From 2fa2d301cbca51263e615cd07d4140b15047cae0 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:13 +0530 Subject: arm64: dts: msm8998: thermal: GPU has two sensors, add the second The first sensor is on top and the second sensor below the GPU Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 56ca9ecdb0bf..b368da235663 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -506,11 +506,34 @@ }; }; - gpu-thermal { + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 13>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; }; -- cgit v1.2.3 From e9d2729dec4b9052528f4c7609d0c5b4cbdf8138 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:14 +0530 Subject: arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals msm8998 has a total of 22 temperature sensors. Populate DT with information about them. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 135 ++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index b368da235663..26e476078cb6 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -535,6 +535,141 @@ }; }; }; + + cluster0-mhm-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_mhm_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-mhm-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_mhm_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cluster1_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + modem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + wlan_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_dsp_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + multimedia-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + multimedia_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; timer { -- cgit v1.2.3 From 1c403ec27c1f597661ea787510200ed897a119b4 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:15 +0530 Subject: arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals sdm845 has a total of 21 temperature sensors. Populate DT with information about them. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 205 +++++++++++++++++++++++++++++++++++ 1 file changed, 205 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 5308f1671824..7c0643ccef18 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2611,5 +2611,210 @@ }; }; }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + q6_modem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + wlan_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + video_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; }; -- cgit v1.2.3 From ae8876ddb826cc4996199163246e8699a165ca9d Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:16 +0530 Subject: arm64: dts: msm8998: thermal: Make trip names consistent Maintain naming consistency with what was landed for sdm845. Simplifies parsing for test tools. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 48 +++++++++++++++++------------------ 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 26e476078cb6..998017d4d847 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -338,20 +338,20 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 1>; trips { - cpu_alert0: trip0 { + cpu0_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -359,20 +359,20 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 2>; trips { - cpu_alert1: trip0 { + cpu1_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -380,20 +380,20 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 3>; trips { - cpu_alert2: trip0 { + cpu2_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -401,20 +401,20 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 4>; trips { - cpu_alert3: trip0 { + cpu3_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -422,20 +422,20 @@ }; }; - cpu-thermal4 { + cpu4-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 7>; trips { - cpu_alert4: trip0 { + cpu4_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit4: trip1 { + cpu4_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -443,20 +443,20 @@ }; }; - cpu-thermal5 { + cpu5-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 8>; trips { - cpu_alert5: trip0 { + cpu5_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit5: trip1 { + cpu5_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -464,20 +464,20 @@ }; }; - cpu-thermal6 { + cpu6-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 9>; trips { - cpu_alert6: trip0 { + cpu6_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit6: trip1 { + cpu6_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -485,20 +485,20 @@ }; }; - cpu-thermal7 { + cpu7-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 10>; trips { - cpu_alert7: trip0 { + cpu7_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit7: trip1 { + cpu7_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; -- cgit v1.2.3 From 032d7c6ee21b0b7e8470cbd0da6df2465c4d83b1 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:17 +0530 Subject: arm64: dts: msm8916: thermal: Make trip names consistent Maintain naming consistency with what was landed for sdm845. Simplifies parsing for test tools. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index c8aa9a0986d2..ea734b98ec96 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -180,19 +180,19 @@ }; thermal-zones { - cpu-thermal0 { + cpu0_1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens 4>; trips { - cpu_alert0: trip0 { + cpu0_1_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_1_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -201,7 +201,7 @@ cooling-maps { map0 { - trip = <&cpu_alert0>; + trip = <&cpu0_1_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -210,19 +210,19 @@ }; }; - cpu-thermal1 { + cpu2_3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens 3>; trips { - cpu_alert1: trip0 { + cpu2_3_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu2_3_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -231,7 +231,7 @@ cooling-maps { map0 { - trip = <&cpu_alert1>; + trip = <&cpu2_3_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -247,12 +247,12 @@ thermal-sensors = <&tsens 2>; trips { - gpu_alert: trip0 { + gpu_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - gpu_crit: trip1 { + gpu_crit: gpu_crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -267,12 +267,12 @@ thermal-sensors = <&tsens 1>; trips { - cam_alert: trip0 { + cam_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cam_crit: trip1 { + cam_crit: cam_crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; -- cgit v1.2.3 From bc3ac5d25195fb8e91aa5d6b310ee035aba889f3 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:18 +0530 Subject: arm64: dts: msm8996: thermal: Make trip names consistent Maintain naming consistency with what was landed for sdm845. Simplifies parsing for test tools. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index e2408ee91184..edcddc74a4fc 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -154,20 +154,20 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 3>; trips { - cpu_alert0: trip0 { + cpu0_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -175,20 +175,20 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 5>; trips { - cpu_alert1: trip0 { + cpu1_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -196,20 +196,20 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 8>; trips { - cpu_alert2: trip0 { + cpu2_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -217,20 +217,20 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 10>; trips { - cpu_alert3: trip0 { + cpu3_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; -- cgit v1.2.3 From 10518bb1594066f7e894832e3cec9306e2d90f22 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 29 Mar 2019 15:42:19 +0530 Subject: arm64: dts: msm8916: thermal: Convert camera trip type to hot We don't have any cooling-devices related to the camera. Use the "hot" trip type so allow the temperature to be exported to userspace and remove the "critical" trip. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index ea734b98ec96..e4b1010f70b6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -270,12 +270,7 @@ cam_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; - type = "passive"; - }; - cam_crit: cam_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; + type = "hot"; }; }; }; -- cgit v1.2.3 From c35b67d3956fa54bb785376d08410d411e3052d4 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Mon, 1 Apr 2019 16:38:37 +0200 Subject: arm64: dts: msm8998: Add UFS phy reset Fixup MSM8998 UFS DT nodes now that Evan's reset series has landed. https://lore.kernel.org/lkml/20190321171800.104681-1-evgreen@chromium.org/ Signed-off-by: Marc Gonzalez Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 75f443d598ff..2658100378e0 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1144,6 +1144,7 @@ phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_GDSC>; + #reset-cells = <1>; clock-names = "core_clk", @@ -1191,6 +1192,9 @@ <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_AUX_CLK>; + reset-names = "ufsphy"; + resets = <&ufshc 0>; + ufsphy_lanes: lanes@1da7400 { reg = <0x01da7400 0x128>, <0x01da7600 0x1fc>, -- cgit v1.2.3 From 720066d17c973fd8721b326793add4430631c82b Mon Sep 17 00:00:00 2001 From: Cao Van Dong Date: Fri, 5 Apr 2019 14:44:06 +0900 Subject: arm64: dts: renesas: r8a7795: Add CMT device nodes This patch adds CMT{0|1|2|3} device nodes for r8a7795 SoC. Tested-by: Cao Van Dong Signed-off-by: Cao Van Dong Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 70 ++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 55472b2b013e..097538cc4b1f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -462,6 +462,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a7795-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7795-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; -- cgit v1.2.3 From 99cb95103e2d058ba1cd050a926162cb9dffece2 Mon Sep 17 00:00:00 2001 From: Cao Van Dong Date: Fri, 5 Apr 2019 14:44:07 +0900 Subject: arm64: dts: renesas: r8a77965: Add CMT device nodes This patch adds CMT{0|1|2|3} device nodes for r8a77965 SoC. Tested-by: Cao Van Dong Signed-off-by: Cao Van Dong Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 70 +++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index d8b81721eb89..4a6446305c18 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -317,6 +317,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77965-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77965-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; -- cgit v1.2.3 From 28a5c61b5136d58325e2a9504f4673d514ebf2e8 Mon Sep 17 00:00:00 2001 From: Cao Van Dong Date: Fri, 5 Apr 2019 14:44:08 +0900 Subject: arm64: dts: renesas: r8a77990: Add CMT device nodes This patch adds CMT{0|1|2|3} device nodes for r8a77990 SoC. Signed-off-by: Cao Van Dong Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 70 +++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 0ca7cb72bfa7..4233e1f71f31 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -284,6 +284,76 @@ status = "disabled"; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77990-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77990-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; -- cgit v1.2.3 From 3f3d795804352d4043d83cc4ee4414b5e96e378a Mon Sep 17 00:00:00 2001 From: Peng Ma Date: Mon, 11 Mar 2019 15:20:13 +0800 Subject: arm64: dts: ls1028a: Corrected the SATA ecc address Ls1028a SATA ecc address with more than 32 bit, so we should corrrect the address. Signed-off-by: Peng Ma Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 8dd3501b1333..b04581249f0b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -297,7 +297,7 @@ sata: sata@3200000 { compatible = "fsl,ls1028a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; + <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = ; clocks = <&clockgen 4 1>; -- cgit v1.2.3 From 071f785511606f2f8732930dd947bed696411d6e Mon Sep 17 00:00:00 2001 From: Peng Ma Date: Tue, 12 Mar 2019 09:50:18 +0800 Subject: arm64: dts: lx2160a: add sata node support Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB boards. Signed-off-by: Peng Ma Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++++ 3 files changed, 76 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 99a22abbe725..1a5acf62f23c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -95,6 +95,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 9df37b159415..c2817b784232 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -128,6 +128,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index fe87204850b5..bb0dd85d809a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -687,6 +687,50 @@ status = "disabled"; }; + sata0: sata@3200000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata1: sata@3210000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata2: sata@3220000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3220000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata3: sata@3230000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3230000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; -- cgit v1.2.3 From 29fdb6b834b8c3ca8d1ca2071d3c2c36cabce2f1 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Sat, 30 Mar 2019 17:07:44 +0000 Subject: arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes lpuart nodes are part of the ADMA subsystem. See Audio DMA memory map in iMX8 QXP RM [1] This patch is based on the dtsi file initially submitted by Teo Hall in i.MX NXP internal tree. [1] https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf Signed-off-by: Teo Hall Signed-off-by: Daniel Baluta Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 33 ++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index a3fbbd8bb024..99d59109c1a7 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -193,6 +193,39 @@ status = "disabled"; }; + adma_lpuart1: serial@5a070000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a070000 0x1000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_1>; + status = "disabled"; + }; + + adma_lpuart2: serial@5a080000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a080000 0x1000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_2>; + status = "disabled"; + }; + + adma_lpuart3: serial@5a090000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a090000 0x1000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_3>; + status = "disabled"; + }; + adma_i2c0: i2c@5a800000 { compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a800000 0x4000>; -- cgit v1.2.3 From beea0f22566cb32c35de89ab0980852b5bbc1c60 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 5 Apr 2019 10:30:00 -0700 Subject: arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible Mark iomuxc_gpr as compatible with "fsl,imx6q-iomuxc-gpr" in order for to allow i.MX6 PCIe driver to use it. Signed-off-by: Andrey Smirnov Acked-by: Lucas Stach Reviewed-by: Fabio Estevam Cc: Shawn Guo Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 4300781558f6..0257ae6718d3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -404,7 +404,7 @@ }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; -- cgit v1.2.3 From d62a250ea33a14d4cb0605a0e58ff1e1332a6a23 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 5 Apr 2019 10:30:01 -0700 Subject: arm64: dts: imx8mq: Add a node for SRC IP block Add a node for reset controller IP block found on i.MX8MQ. Signed-off-by: Andrey Smirnov Reviewed-by: Lucas Stach Reviewed-by: Fabio Estevam Cc: Shawn Guo Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 0257ae6718d3..0235967d1a2e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -450,6 +450,12 @@ "clk_ext3", "clk_ext4"; }; + src: reset-controller@30390000 { + compatible = "fsl,imx8mq-src", "syscon"; + reg = <0x30390000 0x10000>; + #reset-cells = <1>; + }; + gpc: gpc@303a0000 { compatible = "fsl,imx8mq-gpc"; reg = <0x303a0000 0x10000>; -- cgit v1.2.3 From de2a538b97a489bb67be7cdc44115d1c6a07e837 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 5 Apr 2019 10:30:02 -0700 Subject: arm64: dts: imx8mq: Combine PCIE power domains According to NXP's FAE feedback and a comment in ATF firmware, PCIE1 and PCIE2 power domains can't really be used independently. Due to shared reset line both power domains have to be turned on at the same time. Account for that quirk by combining PCIE power domains into a single 'pgc_pcie' power domain. Signed-off-by: Andrey Smirnov Reviewed-by: Lucas Stach Reviewed-by: Fabio Estevam Cc: Shawn Guo Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 0235967d1a2e..253d6d66af1a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -472,9 +472,25 @@ reg = ; }; - pgc_pcie1: power-domain@1 { + /* + * As per comment in ATF source code: + * + * PCIE1 and PCIE2 share the + * same reset signal, if we + * power down PCIE2, PCIE1 + * will be held in reset too. + * + * So instead of creating two + * separate power domains for + * PCIE1 and PCIE2 we create a + * link between both and use + * it as a shared PCIE power + * domain. + */ + pgc_pcie: power-domain@1 { #power-domain-cells = <0>; reg = ; + power-domains = <&pgc_pcie2>; }; pgc_otg1: power-domain@2 { -- cgit v1.2.3 From fc26e600e97acca6b329eacc32498a773cd9fa49 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 5 Apr 2019 10:30:03 -0700 Subject: arm64: dts: imx8mq: Add nodes for PCIe IP blocks Add nodes for two PCIe controllers found on i.MX8MQ. Signed-off-by: Andrey Smirnov Reviewed-by: Lucas Stach Reviewed-by: Fabio Estevam Cc: Shawn Guo Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 61 +++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 253d6d66af1a..2e8c40db9728 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -6,6 +6,7 @@ #include #include +#include #include #include #include @@ -878,6 +879,66 @@ status = "disabled"; }; + + pcie0: pcie@33800000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33800000 0x400000>, + <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + status = "disabled"; + }; + + pcie1: pcie@33c00000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33c00000 0x400000>, + <0x27f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ -- cgit v1.2.3 From cdfdea07090ba385e3b4835d172252a074f029fa Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 5 Apr 2019 10:30:04 -0700 Subject: arm64: dts: imx8mq-evk: Enable PCIE0 interface Enable PCIE0 interface connected to BCM4356 WiFi/Bluetooth module. Signed-off-by: Andrey Smirnov Reviewed-by: Lucas Stach Reviewed-by: Fabio Estevam Cc: Shawn Guo Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 42 ++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 304c28034ddf..ec430b3c35d4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -21,6 +21,12 @@ reg = <0x00000000 0x40000000 0 0xc0000000>; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -118,6 +124,17 @@ status = "okay"; }; +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + + wl-reg-on { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -209,6 +226,18 @@ }; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -303,6 +332,13 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 + MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16 + >; + }; + pinctrl_qspi: qspigrp { fsl,pins = < MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 @@ -430,4 +466,10 @@ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 >; }; + + pinctrl_wifi_reset: wifiresetgrp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 + >; + }; }; -- cgit v1.2.3 From 8cfd813c7307a2fe6ef71b346026a62e49d2b53f Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 3 Apr 2019 18:52:18 +0200 Subject: arm64: dts: imx8mq: fix higher CPU operating point According to the datasheet both industrial and consumer variants support at least 1.3GHz CPU frequency at 1.0V. Only the OPP at 1.5GHz is unavailable on some SKUs and thus need further fuse reading support. Signed-off-by: Lucas Stach Reviewed-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 2e8c40db9728..2f106be3e85e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -148,8 +148,8 @@ clock-latency-ns = <150000>; }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1000000>; clock-latency-ns = <150000>; opp-suspend; -- cgit v1.2.3 From de674862f76d006c670308c46a010b3a09536fd3 Mon Sep 17 00:00:00 2001 From: "Leonidas P. Papadakos" Date: Thu, 4 Apr 2019 14:23:29 +0300 Subject: arm64: dts: rockchip: eMMC additions for rk3328-roc-cc The eMMC 5.x that Libre Computer provide for their boards supports HS200 mode. The support is already included in the dts for their newest board: La Frite (AML-S805X-AC) dts: arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts That same eMMC is supported in the ROC-RK3328-CC: https://www.loverpi.com/products/libre-computer-board-emmc-5-x-module This increases the speed of the eMMC significantly. Signed-off-by: Leonidas P. Papadakos [added supplies as suggested by Leonidas] Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 53643ea4cfca..8ec6c68842ff 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -122,9 +122,14 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; + max-frequency = <150000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; status = "okay"; }; -- cgit v1.2.3 From efd38668884f3ae0e7b65ba3936871ee84bd4114 Mon Sep 17 00:00:00 2001 From: "Leonidas P. Papadakos" Date: Wed, 3 Apr 2019 21:22:48 +0300 Subject: arm64: dts: rockchip: enable display nodes on rk3328-roc-cc Enable necessary nodes to get output on the hdmi port of the board. This is a port of Heiko's patch for the rock64. Signed-off-by: Leonidas P. Papadakos Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 8ec6c68842ff..36a73a078f0a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -150,6 +150,14 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -333,3 +341,11 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; -- cgit v1.2.3 From d64420e816059661e70db31d891f38e79f483080 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 2 Apr 2019 13:56:24 +0200 Subject: arm64: dts: rockchip: bulk convert gpios to their constant counterparts Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/ Signed-off-by: Heiko Stuebner Tested-by: Katsuhiro Suzuki Acked-by: Robin Murphy --- arch/arm64/boot/dts/rockchip/px30-evb.dts | 4 +- arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 34 +-- arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts | 8 +- .../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 14 +- arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 8 +- .../boot/dts/rockchip/rk3368-orion-r68-meta.dts | 46 ++-- arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 6 +- arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 36 +-- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 240 ++++++++-------- arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 6 +- arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 18 +- arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts | 2 +- .../boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 14 +- arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 8 +- .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 68 ++--- arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 56 ++-- arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts | 2 +- .../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 12 +- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 18 +- arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 32 +-- arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 4 +- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 306 ++++++++++----------- 24 files changed, 473 insertions(+), 473 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 263d7f3dbc44..6eb7407a84aa 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -145,12 +145,12 @@ soc_slppin_slp: soc_slppin_slp { rockchip,pins = - <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA4 1 &pcfg_pull_none>; }; soc_slppin_rst: soc_slppin_rst { rockchip,pins = - <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>; + <0 RK_PA4 2 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 8302d86d35c4..49c4b96da3d4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -208,7 +208,7 @@ sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = - <1 18 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index e96eb62f362b..1c52f47c43a6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -154,60 +154,60 @@ backlight { bl_en: bl-en { - rockchip,pins = <0 20 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>; }; emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>; }; emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>; }; emmc_reset: emmc-reset { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdio { wifi_reg_on: wifi-reg-on { - rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_rst: bt-rst { - rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index 8fa550cbd1a4..1d0778ff217c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -233,23 +233,23 @@ &pinctrl { ir { ir_int: ir-int { - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; pmic_int: pmic-int { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts index fca8e87d8f52..8251f3c0d0a8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts @@ -113,34 +113,34 @@ haikou_pin_hog: haikou-pin-hog { rockchip,pins = /* LID_BTN */ - , + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - , + <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - , + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, /* BIOS_DISABLE# */ - ; + <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { led_sd_haikou: led-sd-gpio { rockchip,pins = - ; + <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { sdmmc_cd_gpio: sdmmc-cd-gpio { rockchip,pins = - ; + <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { rockchip,pins = - ; + <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index 1b35d612b660..8f6fcfe65bb2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -274,17 +274,17 @@ leds { led_pins_module: led-module-gpio { rockchip,pins = - , - ; + <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { - rockchip,pins = ; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; pmic_sleep: pmic-sleep { - rockchip,pins = ; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index f5aa3cad67c5..6cc310255da8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -226,73 +226,73 @@ emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>; }; emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>; }; emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>; }; emmc_reset: emmc-reset { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; leds { stby_pwren: stby-pwren { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; led_ctl: led-ctl { - rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>, + <2 RK_PA6 1 &pcfg_pull_up_drv_8ma>, + <2 RK_PA7 1 &pcfg_pull_up_drv_8ma>, + <2 RK_PB0 1 &pcfg_pull_up_drv_8ma>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 41edcfd53184..231db0305a03 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -218,17 +218,17 @@ &pinctrl { keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; pmic_int: pmic-int { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index d34064c65f10..006a1fb6a816 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -235,64 +235,64 @@ emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>; }; emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>; }; emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>; }; emmc_reset: emmc-reset { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; ir { ir_int: ir-int { - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { stby_pwren: stby-pwren { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; led_ctl: led-ctl { - rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio { wifi_reg_on: wifi-reg-on { - rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_rst: bt-rst { - rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 06e7c31d7d07..fd86188010b2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -881,345 +881,345 @@ emmc { emmc_clk: emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>; }; emmc_pwr: emmc-pwr { - rockchip,pins = <1 27 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>; }; emmc_bus1: emmc-bus1 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>; }; emmc_bus4: emmc-bus4 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, - <1 19 RK_FUNC_2 &pcfg_pull_up>, - <1 20 RK_FUNC_2 &pcfg_pull_up>, - <1 21 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>, + <1 RK_PC3 2 &pcfg_pull_up>, + <1 RK_PC4 2 &pcfg_pull_up>, + <1 RK_PC5 2 &pcfg_pull_up>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, - <1 19 RK_FUNC_2 &pcfg_pull_up>, - <1 20 RK_FUNC_2 &pcfg_pull_up>, - <1 21 RK_FUNC_2 &pcfg_pull_up>, - <1 22 RK_FUNC_2 &pcfg_pull_up>, - <1 23 RK_FUNC_2 &pcfg_pull_up>, - <1 24 RK_FUNC_2 &pcfg_pull_up>, - <1 25 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>, + <1 RK_PC3 2 &pcfg_pull_up>, + <1 RK_PC4 2 &pcfg_pull_up>, + <1 RK_PC5 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>, + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PD0 2 &pcfg_pull_up>, + <1 RK_PD1 2 &pcfg_pull_up>; }; }; gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 19 RK_FUNC_1 &pcfg_pull_none>, - <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 10 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 14 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 28 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 15 RK_FUNC_1 &pcfg_pull_none>, - <3 16 RK_FUNC_1 &pcfg_pull_none>, - <3 17 RK_FUNC_1 &pcfg_pull_none>, - <3 18 RK_FUNC_1 &pcfg_pull_none>, - <3 25 RK_FUNC_1 &pcfg_pull_none>, - <3 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PC3 1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none_12ma>, + <3 RK_PB1 1 &pcfg_pull_none_12ma>, + <3 RK_PB2 1 &pcfg_pull_none_12ma>, + <3 RK_PB6 1 &pcfg_pull_none_12ma>, + <3 RK_PD4 1 &pcfg_pull_none_12ma>, + <3 RK_PB5 1 &pcfg_pull_none_12ma>, + <3 RK_PB7 1 &pcfg_pull_none>, + <3 RK_PC0 1 &pcfg_pull_none>, + <3 RK_PC1 1 &pcfg_pull_none>, + <3 RK_PC2 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PC4 1 &pcfg_pull_none>; }; rmii_pins: rmii-pins { - rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 19 RK_FUNC_1 &pcfg_pull_none>, - <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 15 RK_FUNC_1 &pcfg_pull_none>, - <3 16 RK_FUNC_1 &pcfg_pull_none>, - <3 20 RK_FUNC_1 &pcfg_pull_none>, - <3 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PC3 1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none_12ma>, + <3 RK_PB1 1 &pcfg_pull_none_12ma>, + <3 RK_PB5 1 &pcfg_pull_none_12ma>, + <3 RK_PB7 1 &pcfg_pull_none>, + <3 RK_PC0 1 &pcfg_pull_none>, + <3 RK_PC4 1 &pcfg_pull_none>, + <3 RK_PC5 1 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, - <0 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>, + <0 RK_PA7 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <2 21 RK_FUNC_1 &pcfg_pull_none>, - <2 22 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>, + <2 RK_PC6 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_none>, - <3 31 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB1 2 &pcfg_pull_none>, + <3 RK_PD7 2 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>, - <1 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>, + <1 RK_PC1 1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <3 24 RK_FUNC_2 &pcfg_pull_none>, - <3 25 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>, + <3 RK_PD1 2 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { - rockchip,pins = <3 26 RK_FUNC_2 &pcfg_pull_none>, - <3 27 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD2 2 &pcfg_pull_none>, + <3 RK_PD3 2 &pcfg_pull_none>; }; }; i2s { i2s_8ch_bus: i2s-8ch-bus { - rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>, - <2 13 RK_FUNC_1 &pcfg_pull_none>, - <2 14 RK_FUNC_1 &pcfg_pull_none>, - <2 15 RK_FUNC_1 &pcfg_pull_none>, - <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 17 RK_FUNC_1 &pcfg_pull_none>, - <2 18 RK_FUNC_1 &pcfg_pull_none>, - <2 19 RK_FUNC_1 &pcfg_pull_none>, - <2 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PB5 1 &pcfg_pull_none>, + <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB7 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC2 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none>, + <2 RK_PC4 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB0 2 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 8 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <3 29 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 3 &pcfg_pull_none>; }; }; sdio0 { sdio0_bus1: sdio0-bus1 { - rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>; }; sdio0_bus4: sdio0-bus4 { - rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>, - <2 29 RK_FUNC_1 &pcfg_pull_up>, - <2 30 RK_FUNC_1 &pcfg_pull_up>, - <2 31 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>, + <2 RK_PD5 1 &pcfg_pull_up>, + <2 RK_PD6 1 &pcfg_pull_up>, + <2 RK_PD7 1 &pcfg_pull_up>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 1 &pcfg_pull_up>; }; sdio0_clk: sdio0-clk { - rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>; }; sdio0_cd: sdio0-cd { - rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA2 1 &pcfg_pull_up>; }; sdio0_wp: sdio0-wp { - rockchip,pins = <3 3 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA3 1 &pcfg_pull_up>; }; sdio0_pwr: sdio0-pwr { - rockchip,pins = <3 4 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_up>; }; sdio0_bkpwr: sdio0-bkpwr { - rockchip,pins = <3 5 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA5 1 &pcfg_pull_up>; }; sdio0_int: sdio0-int { - rockchip,pins = <3 6 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>, - <2 6 RK_FUNC_1 &pcfg_pull_up>, - <2 7 RK_FUNC_1 &pcfg_pull_up>, - <2 8 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>, + <2 RK_PA6 1 &pcfg_pull_up>, + <2 RK_PA7 1 &pcfg_pull_up>, + <2 RK_PB0 1 &pcfg_pull_up>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD5 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <1 24 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <1 25 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD1 3 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <1 23 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC7 3 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <1 22 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC6 3 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <1 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <1 15 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB7 2 &pcfg_pull_up>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <3 28 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD4 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <1 16 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC0 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <1 17 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC1 2 &pcfg_pull_up>; }; }; spi2 { spi2_clk: spi2-clk { - rockchip,pins = <0 12 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB4 2 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { - rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>; }; spi2_rx: spi2-rx { - rockchip,pins = <0 10 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB2 2 &pcfg_pull_up>; }; spi2_tx: spi2-tx { - rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>, - <2 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up>, + <2 RK_PD1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <2 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <0 20 RK_FUNC_3 &pcfg_pull_up>, - <0 21 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC4 3 &pcfg_pull_up>, + <0 RK_PC5 3 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <0 22 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC6 3 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <0 23 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC7 3 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <2 6 RK_FUNC_2 &pcfg_pull_up>, - <2 5 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA6 2 &pcfg_pull_up>, + <2 RK_PA5 2 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <3 29 RK_FUNC_2 &pcfg_pull_up>, - <3 30 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 2 &pcfg_pull_up>, + <3 RK_PD6 3 &pcfg_pull_none>; }; uart3_cts: uart3-cts { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>; }; uart3_rts: uart3-rts { - rockchip,pins = <3 17 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC1 2 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { - rockchip,pins = <0 27 RK_FUNC_3 &pcfg_pull_up>, - <0 26 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 3 &pcfg_pull_up>, + <0 RK_PD2 3 &pcfg_pull_none>; }; uart4_cts: uart4-cts { - rockchip,pins = <0 24 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 3 &pcfg_pull_none>; }; uart4_rts: uart4-rts { - rockchip,pins = <0 25 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD1 3 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 959ddc3c7df5..77008dca45bc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -208,19 +208,19 @@ pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; pmic_dvs2: pmic-dvs2 { rockchip,pins = - <1 18 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <4 25 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts index 027d428917b8..6b059bd7a04f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -95,53 +95,53 @@ gmac { rgmii_sleep_pins: rgmii-sleep-pins { rockchip,pins = - <3 15 RK_FUNC_GPIO &pcfg_output_low>; + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; }; }; pcie { pcie_drv: pcie-drv { rockchip,pins = - <1 24 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins = - <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; leds { user_led1: user_led1 { rockchip,pins = - <4 25 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; user_led2: user_led2 { rockchip,pins = - <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; user_led3: user_led3 { rockchip,pins = - <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; user_led4: user_led4 { rockchip,pins = - <1 0 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_led: wlan_led { rockchip,pins = - <1 1 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_led: bt_led { rockchip,pins = - <1 4 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index d1cf404b8708..a9f4d6d7d2b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -73,7 +73,7 @@ &pinctrl { tpm { h1_int_od_l: h1-int-od-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 931640e9aed4..7cd6d470c1cb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -365,27 +365,27 @@ ap_i2c_tp: &i2c5 { &pinctrl { discrete-regulators { pp1500_en: pp1500-en { - rockchip,pins = ; }; pp1800_audio_en: pp1800-audio-en { - rockchip,pins = ; }; pp3000_en: pp3000-en { - rockchip,pins = ; }; pp3300_disp_en: pp3300-disp-en { - rockchip,pins = ; }; wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = ; }; }; @@ -393,10 +393,10 @@ ap_i2c_tp: &i2c5 { &wifi { wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 15e254a77391..3e2272b56eb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -290,24 +290,24 @@ ap_i2c_dig: &i2c2 { digitizer { /* Has external pullup */ cpu1_dig_irq_l: cpu1-dig-irq-l { - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* Has external pullup */ cpu1_dig_pdct_l: cpu1-dig-pdct-l { - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; discrete-regulators { cpu3_pen_pwr_en: cpu3-pen-pwr-en { - rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { cpu1_pen_eject: cpu1-pen-eject { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 62ea7d6a7d4a..50dfab51f175 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -455,58 +455,58 @@ camera: &i2c7 { /* PINCTRL OVERRIDES */ &ec_ap_int_l { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; &ap_fw_wp { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; &bl_en { - rockchip,pins = <4 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; &bt_host_wake_l { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; &ec_ap_int_l { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; &headset_int_l { - rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; }; &i2s0_8ch_bus { rockchip,pins = - <3 24 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 25 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 26 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 27 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 31 RK_FUNC_1 &pcfg_pull_none_6ma>, - <4 0 RK_FUNC_1 &pcfg_pull_none_6ma>; + <3 RK_PD0 1 &pcfg_pull_none_6ma>, + <3 RK_PD1 1 &pcfg_pull_none_6ma>, + <3 RK_PD2 1 &pcfg_pull_none_6ma>, + <3 RK_PD3 1 &pcfg_pull_none_6ma>, + <3 RK_PD7 1 &pcfg_pull_none_6ma>, + <4 RK_PA0 1 &pcfg_pull_none_6ma>; }; /* there is no external pull up, so need to set this pin pull up */ &sdmmc_cd_gpio { - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; &sd_pwr_1800_sel { - rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; }; &sdmode_en { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; &touch_reset_l { - rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; }; &touch_int_l { - rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; &pinctrl { @@ -523,84 +523,84 @@ camera: &i2c7 { camera { pp1250_cam_en: pp1250-dvdd { - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; pp2800_cam_en: pp2800-avdd { - rockchip,pins = <2 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; ucam_rst: ucam_rst { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; wcam_rst: wcam_rst { - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; digitizer { pen_int_odl: pen-int-odl { - rockchip,pins = <1 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; pen_reset_l: pen-reset-l { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; discrete-regulators { display_rst_l: display-rst-l { - rockchip,pins = <4 25 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>; }; ppvarp_lcd_en: ppvarp-lcd-en { - rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; ppvarn_lcd_en: ppvarn-lcd-en { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; dmic { dmic_en: dmic-en { - rockchip,pins = <4 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { pen_eject_odl: pen-eject-odl { - rockchip,pins = <1 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; tpm { h1_int_od_l: h1-int-od-l { - rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &wifi { bt_en_1v8_l: bt-en-1v8-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_pd_1v8_l: wlan-pd-1v8-l { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* Default pull-up, but just to be clear */ wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; wifi_perst_l: wifi-perst-l { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <1 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index da03fa9c5662..dd5624975c9b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -676,29 +676,29 @@ ap_i2c_audio: &i2c8 { backlight-enable { bl_en: bl-en { - rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; cros-ec { ec_ap_int_l: ec-ap-int-l { - rockchip,pins = ; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; discrete-regulators { sd_io_pwr_en: sd-io-pwr-en { - rockchip,pins = ; }; sd_pwr_1800_sel: sd-pwr-1800-sel { - rockchip,pins = ; }; sd_slot_pwr_en: sd-slot-pwr-en { - rockchip,pins = ; }; }; @@ -706,17 +706,17 @@ ap_i2c_audio: &i2c8 { codec { /* Has external pullup */ headset_int_l: headset-int-l { - rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; }; mic_int: mic-int { - rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; max98357a { sdmode_en: sdmode-en { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -727,7 +727,7 @@ ap_i2c_audio: &i2c8 { * to hack this as gpio, so the EP could be able to * de-assert it along and make ClockPM(CPM) work. */ - rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -738,20 +738,20 @@ ap_i2c_audio: &i2c8 { */ sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB0 1 &pcfg_pull_none_8ma>, + <4 RK_PB1 1 &pcfg_pull_none_8ma>, + <4 RK_PB2 1 &pcfg_pull_none_8ma>, + <4 RK_PB3 1 &pcfg_pull_none_8ma>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB4 1 &pcfg_pull_none_8ma>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB5 1 &pcfg_pull_none_8ma>; }; /* @@ -765,12 +765,12 @@ ap_i2c_audio: &i2c8 { */ sdmmc_cd: sdmmc-cd { rockchip,pins = - <0 7 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA7 1 &pcfg_pull_none>; }; /* This is where we actually hook up CD; has external pull */ sdmmc_cd_gpio: sdmmc-cd-gpio { - rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -780,47 +780,47 @@ ap_i2c_audio: &i2c8 { * Pull down SPI1 CLK/CS/RX/TX during suspend, to * prevent leakage. */ - rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, - <1 10 RK_FUNC_GPIO &pcfg_pull_down>, - <1 7 RK_FUNC_GPIO &pcfg_pull_down>, - <1 8 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; }; }; touchscreen { touch_int_l: touch-int-l { - rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; touch_reset_l: touch-reset-l { - rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; trackpad { ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { - rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>; }; trackpad_int_l: trackpad-int-l { - rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; wifi: wifi { wlan_module_reset_l: wlan-module-reset-l { - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { /* Kevin has an external pull up, but Gru does not */ - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; write-protect { ap_fw_wp: ap-fw-wp { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index 931c3dbf1b7d..2a127985ab17 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -125,7 +125,7 @@ ir { ir_rx: ir-rx { /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ - rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 2166be171df8..0541dfce924d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -547,7 +547,7 @@ sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = - ; + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 1e6a71066c16..d80d6b726820 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -168,27 +168,27 @@ haikou_pin_hog: haikou-pin-hog { rockchip,pins = /* LID_BTN */ - , + <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - , + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - , + <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* BIOS_DISABLE# */ - ; + <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { led_sd_haikou: led-sd-gpio { rockchip,pins = - ; + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb2 { otg_vbus_drv: otg-vbus-drv { rockchip,pins = - ; + <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 4f75bb6b2f14..6be1d4430427 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -414,10 +414,10 @@ */ &i2s0_2ch_bus { rockchip,pins = - , - , - , - ; + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; }; &io_domains { @@ -441,29 +441,29 @@ i2c8 { i2c8_xfer_a: i2c8-xfer { rockchip,pins = - , - ; + <1 RK_PC4 1 &pcfg_pull_up>, + <1 RK_PC5 1 &pcfg_pull_up>; }; }; leds { led_pin_module: led-module-gpio { rockchip,pins = - ; + <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = - ; + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - ; + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 5ba2aeca0fa8..c7d48d41e184 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -411,62 +411,62 @@ sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB0 1 &pcfg_pull_up_8ma>; }; sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB0 1 &pcfg_pull_up_8ma>, + <4 RK_PB1 1 &pcfg_pull_up_8ma>, + <4 RK_PB2 1 &pcfg_pull_up_8ma>, + <4 RK_PB3 1 &pcfg_pull_up_8ma>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; + <4 RK_PB4 1 &pcfg_pull_none_18ma>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB5 1 &pcfg_pull_up_8ma>; }; }; sdio0 { sdio0_bus4: sdio0-bus4 { rockchip,pins = - <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; }; sdio0_cmd: sdio0-cmd { rockchip,pins = - <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + <2 RK_PD0 1 &pcfg_pull_up_20ma>; }; sdio0_clk: sdio0-clk { rockchip,pins = - <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + <2 RK_PD1 1 &pcfg_pull_none_20ma>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; vsel1_gpio: vsel1-gpio { rockchip,pins = - <1 17 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; vsel2_gpio: vsel2-gpio { rockchip,pins = - <1 14 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 946d3589575a..04623e52ac5d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -471,7 +471,7 @@ fan { motor_pwr: motor-pwr { rockchip,pins = - ; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -493,7 +493,7 @@ sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = - ; + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 382297ecfefa..f54c855f8cdf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -2053,14 +2053,14 @@ clock { clk_32k: clk-32k { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; }; edp { edp_hpd: edp-hpd { rockchip,pins = - <4 23 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC7 2 &pcfg_pull_none>; }; }; @@ -2068,576 +2068,576 @@ rgmii_pins: rgmii-pins { rockchip,pins = /* mac_txclk */ - <3 17 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PC1 1 &pcfg_pull_none_13ma>, /* mac_rxclk */ - <3 14 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB6 1 &pcfg_pull_none>, /* mac_mdio */ - <3 13 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB5 1 &pcfg_pull_none>, /* mac_txen */ - <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PB4 1 &pcfg_pull_none_13ma>, /* mac_clk */ - <3 11 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB3 1 &pcfg_pull_none>, /* mac_rxdv */ - <3 9 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB1 1 &pcfg_pull_none>, /* mac_mdc */ - <3 8 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none>, /* mac_rxd1 */ - <3 7 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>, /* mac_rxd0 */ - <3 6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, /* mac_txd1 */ - <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA5 1 &pcfg_pull_none_13ma>, /* mac_txd0 */ - <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA4 1 &pcfg_pull_none_13ma>, /* mac_rxd3 */ - <3 3 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA3 1 &pcfg_pull_none>, /* mac_rxd2 */ - <3 2 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA2 1 &pcfg_pull_none>, /* mac_txd3 */ - <3 1 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA1 1 &pcfg_pull_none_13ma>, /* mac_txd2 */ - <3 0 RK_FUNC_1 &pcfg_pull_none_13ma>; + <3 RK_PA0 1 &pcfg_pull_none_13ma>; }; rmii_pins: rmii-pins { rockchip,pins = /* mac_mdio */ - <3 13 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB5 1 &pcfg_pull_none>, /* mac_txen */ - <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PB4 1 &pcfg_pull_none_13ma>, /* mac_clk */ - <3 11 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB3 1 &pcfg_pull_none>, /* mac_rxer */ - <3 10 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB2 1 &pcfg_pull_none>, /* mac_rxdv */ - <3 9 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB1 1 &pcfg_pull_none>, /* mac_mdc */ - <3 8 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none>, /* mac_rxd1 */ - <3 7 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>, /* mac_rxd0 */ - <3 6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, /* mac_txd1 */ - <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA5 1 &pcfg_pull_none_13ma>, /* mac_txd0 */ - <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>; + <3 RK_PA4 1 &pcfg_pull_none_13ma>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = - <1 15 RK_FUNC_2 &pcfg_pull_none>, - <1 16 RK_FUNC_2 &pcfg_pull_none>; + <1 RK_PB7 2 &pcfg_pull_none>, + <1 RK_PC0 2 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { rockchip,pins = - <4 2 RK_FUNC_1 &pcfg_pull_none>, - <4 1 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA2 1 &pcfg_pull_none>, + <4 RK_PA1 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { rockchip,pins = - <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>, - <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>; + <2 RK_PA1 2 &pcfg_pull_none_12ma>, + <2 RK_PA0 2 &pcfg_pull_none_12ma>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { rockchip,pins = - <4 17 RK_FUNC_1 &pcfg_pull_none>, - <4 16 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC1 1 &pcfg_pull_none>, + <4 RK_PC0 1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { rockchip,pins = - <1 12 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB4 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { rockchip,pins = - <3 11 RK_FUNC_2 &pcfg_pull_none>, - <3 10 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB3 2 &pcfg_pull_none>, + <3 RK_PB2 2 &pcfg_pull_none>; }; }; i2c6 { i2c6_xfer: i2c6-xfer { rockchip,pins = - <2 10 RK_FUNC_2 &pcfg_pull_none>, - <2 9 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB2 2 &pcfg_pull_none>, + <2 RK_PB1 2 &pcfg_pull_none>; }; }; i2c7 { i2c7_xfer: i2c7-xfer { rockchip,pins = - <2 8 RK_FUNC_2 &pcfg_pull_none>, - <2 7 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB0 2 &pcfg_pull_none>, + <2 RK_PA7 2 &pcfg_pull_none>; }; }; i2c8 { i2c8_xfer: i2c8-xfer { rockchip,pins = - <1 21 RK_FUNC_1 &pcfg_pull_none>, - <1 20 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC5 1 &pcfg_pull_none>, + <1 RK_PC4 1 &pcfg_pull_none>; }; }; i2s0 { i2s0_2ch_bus: i2s0-2ch-bus { rockchip,pins = - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 25 RK_FUNC_1 &pcfg_pull_none>, - <3 26 RK_FUNC_1 &pcfg_pull_none>, - <3 27 RK_FUNC_1 &pcfg_pull_none>, - <3 31 RK_FUNC_1 &pcfg_pull_none>, - <4 0 RK_FUNC_1 &pcfg_pull_none>; + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; }; i2s0_8ch_bus: i2s0-8ch-bus { rockchip,pins = - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 25 RK_FUNC_1 &pcfg_pull_none>, - <3 26 RK_FUNC_1 &pcfg_pull_none>, - <3 27 RK_FUNC_1 &pcfg_pull_none>, - <3 28 RK_FUNC_1 &pcfg_pull_none>, - <3 29 RK_FUNC_1 &pcfg_pull_none>, - <3 30 RK_FUNC_1 &pcfg_pull_none>, - <3 31 RK_FUNC_1 &pcfg_pull_none>, - <4 0 RK_FUNC_1 &pcfg_pull_none>; + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; }; }; i2s1 { i2s1_2ch_bus: i2s1-2ch-bus { rockchip,pins = - <4 3 RK_FUNC_1 &pcfg_pull_none>, - <4 4 RK_FUNC_1 &pcfg_pull_none>, - <4 5 RK_FUNC_1 &pcfg_pull_none>, - <4 6 RK_FUNC_1 &pcfg_pull_none>, - <4 7 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA3 1 &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; }; }; sdio0 { sdio0_bus1: sdio0-bus1 { rockchip,pins = - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PC4 1 &pcfg_pull_up>; }; sdio0_bus4: sdio0-bus4 { rockchip,pins = - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PC4 1 &pcfg_pull_up>, + <2 RK_PC5 1 &pcfg_pull_up>, + <2 RK_PC6 1 &pcfg_pull_up>, + <2 RK_PC7 1 &pcfg_pull_up>; }; sdio0_cmd: sdio0-cmd { rockchip,pins = - <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD0 1 &pcfg_pull_up>; }; sdio0_clk: sdio0-clk { rockchip,pins = - <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PD1 1 &pcfg_pull_none>; }; sdio0_cd: sdio0-cd { rockchip,pins = - <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD2 1 &pcfg_pull_up>; }; sdio0_pwr: sdio0-pwr { rockchip,pins = - <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD3 1 &pcfg_pull_up>; }; sdio0_bkpwr: sdio0-bkpwr { rockchip,pins = - <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD4 1 &pcfg_pull_up>; }; sdio0_wp: sdio0-wp { rockchip,pins = - <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA3 1 &pcfg_pull_up>; }; sdio0_int: sdio0-int { rockchip,pins = - <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA4 1 &pcfg_pull_up>; }; }; sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 1 &pcfg_pull_up>, + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB2 1 &pcfg_pull_up>, + <4 RK_PB3 1 &pcfg_pull_up>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PB4 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB5 1 &pcfg_pull_up>; }; sdmmc_cd: sdmmc-cd { rockchip,pins = - <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA7 1 &pcfg_pull_up>; }; sdmmc_wp: sdmmc-wp { rockchip,pins = - <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PB0 1 &pcfg_pull_up>; }; }; sleep { ap_pwroff: ap-pwroff { - rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; }; ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; }; }; spdif { spdif_bus: spdif-bus { rockchip,pins = - <4 21 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC5 1 &pcfg_pull_none>; }; spdif_bus_1: spdif-bus-1 { rockchip,pins = - <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + <3 RK_PC0 3 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { rockchip,pins = - <3 6 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA6 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { rockchip,pins = - <3 7 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA7 2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { rockchip,pins = - <3 8 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PB0 2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { rockchip,pins = - <3 5 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA5 2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { rockchip,pins = - <3 4 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA4 2 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { rockchip,pins = - <1 9 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB1 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { rockchip,pins = - <1 10 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB2 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { rockchip,pins = - <1 7 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PA7 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { rockchip,pins = - <1 8 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB0 2 &pcfg_pull_up>; }; }; spi2 { spi2_clk: spi2-clk { rockchip,pins = - <2 11 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB3 1 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { rockchip,pins = - <2 12 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB4 1 &pcfg_pull_up>; }; spi2_rx: spi2-rx { rockchip,pins = - <2 9 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB1 1 &pcfg_pull_up>; }; spi2_tx: spi2-tx { rockchip,pins = - <2 10 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB2 1 &pcfg_pull_up>; }; }; spi3 { spi3_clk: spi3-clk { rockchip,pins = - <1 17 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC1 1 &pcfg_pull_up>; }; spi3_cs0: spi3-cs0 { rockchip,pins = - <1 18 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC2 1 &pcfg_pull_up>; }; spi3_rx: spi3-rx { rockchip,pins = - <1 15 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PB7 1 &pcfg_pull_up>; }; spi3_tx: spi3-tx { rockchip,pins = - <1 16 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC0 1 &pcfg_pull_up>; }; }; spi4 { spi4_clk: spi4-clk { rockchip,pins = - <3 2 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA2 2 &pcfg_pull_up>; }; spi4_cs0: spi4-cs0 { rockchip,pins = - <3 3 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA3 2 &pcfg_pull_up>; }; spi4_rx: spi4-rx { rockchip,pins = - <3 0 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA0 2 &pcfg_pull_up>; }; spi4_tx: spi4-tx { rockchip,pins = - <3 1 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA1 2 &pcfg_pull_up>; }; }; spi5 { spi5_clk: spi5-clk { rockchip,pins = - <2 22 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC6 2 &pcfg_pull_up>; }; spi5_cs0: spi5-cs0 { rockchip,pins = - <2 23 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC7 2 &pcfg_pull_up>; }; spi5_rx: spi5-rx { rockchip,pins = - <2 20 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC4 2 &pcfg_pull_up>; }; spi5_tx: spi5-tx { rockchip,pins = - <2 21 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC5 2 &pcfg_pull_up>; }; }; testclk { test_clkout0: test-clkout0 { rockchip,pins = - <0 0 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA0 1 &pcfg_pull_none>; }; test_clkout1: test-clkout1 { rockchip,pins = - <2 25 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PD1 2 &pcfg_pull_none>; }; test_clkout2: test-clkout2 { rockchip,pins = - <0 8 RK_FUNC_3 &pcfg_pull_none>; + <0 RK_PB0 3 &pcfg_pull_none>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <1 6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { rockchip,pins = - <2 16 RK_FUNC_1 &pcfg_pull_up>, - <2 17 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC0 1 &pcfg_pull_up>, + <2 RK_PC1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { rockchip,pins = - <2 18 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC2 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { rockchip,pins = - <2 19 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { rockchip,pins = - <3 12 RK_FUNC_2 &pcfg_pull_up>, - <3 13 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB4 2 &pcfg_pull_up>, + <3 RK_PB5 2 &pcfg_pull_none>; }; }; uart2a { uart2a_xfer: uart2a-xfer { rockchip,pins = - <4 8 RK_FUNC_2 &pcfg_pull_up>, - <4 9 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PB0 2 &pcfg_pull_up>, + <4 RK_PB1 2 &pcfg_pull_none>; }; }; uart2b { uart2b_xfer: uart2b-xfer { rockchip,pins = - <4 16 RK_FUNC_2 &pcfg_pull_up>, - <4 17 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC0 2 &pcfg_pull_up>, + <4 RK_PC1 2 &pcfg_pull_none>; }; }; uart2c { uart2c_xfer: uart2c-xfer { rockchip,pins = - <4 19 RK_FUNC_1 &pcfg_pull_up>, - <4 20 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC3 1 &pcfg_pull_up>, + <4 RK_PC4 1 &pcfg_pull_none>; }; }; uart3 { uart3_xfer: uart3-xfer { rockchip,pins = - <3 14 RK_FUNC_2 &pcfg_pull_up>, - <3 15 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB6 2 &pcfg_pull_up>, + <3 RK_PB7 2 &pcfg_pull_none>; }; uart3_cts: uart3-cts { rockchip,pins = - <3 18 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC2 2 &pcfg_pull_none>; }; uart3_rts: uart3-rts { rockchip,pins = - <3 19 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC3 2 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { rockchip,pins = - <1 7 RK_FUNC_1 &pcfg_pull_up>, - <1 8 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PA7 1 &pcfg_pull_up>, + <1 RK_PB0 1 &pcfg_pull_none>; }; }; uarthdcp { uarthdcp_xfer: uarthdcp-xfer { rockchip,pins = - <4 21 RK_FUNC_2 &pcfg_pull_up>, - <4 22 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC5 2 &pcfg_pull_up>, + <4 RK_PC6 2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC2 1 &pcfg_pull_none>; }; pwm0_pin_pull_down: pwm0-pin-pull-down { rockchip,pins = - <4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>; + <4 RK_PC2 1 &pcfg_pull_down>; }; vop0_pwm_pin: vop0-pwm-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC2 2 &pcfg_pull_none>; }; vop1_pwm_pin: vop1-pwm-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC2 3 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { rockchip,pins = - <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC6 1 &pcfg_pull_none>; }; pwm1_pin_pull_down: pwm1-pin-pull-down { rockchip,pins = - <4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>; + <4 RK_PC6 1 &pcfg_pull_down>; }; }; pwm2 { pwm2_pin: pwm2-pin { rockchip,pins = - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC3 1 &pcfg_pull_none>; }; pwm2_pin_pull_down: pwm2-pin-pull-down { rockchip,pins = - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>; + <1 RK_PC3 1 &pcfg_pull_down>; }; }; pwm3a { pwm3a_pin: pwm3a-pin { rockchip,pins = - <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA6 1 &pcfg_pull_none>; }; }; pwm3b { pwm3b_pin: pwm3b-pin { rockchip,pins = - <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB6 1 &pcfg_pull_none>; }; }; hdmi { hdmi_i2c_xfer: hdmi-i2c-xfer { rockchip,pins = - <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>, - <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC1 3 &pcfg_pull_none>, + <4 RK_PC0 3 &pcfg_pull_none>; }; hdmi_cec: hdmi-cec { rockchip,pins = - <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC7 1 &pcfg_pull_none>; }; }; -- cgit v1.2.3 From 40a0dd4253c03e7ec21dd38f25901486d34b01c7 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Sun, 7 Apr 2019 00:35:57 +0900 Subject: arm64: dts: rockchip: fix cts, rts pin assign of UART3 for rk3399 This patch fixes pin assign of cts and rts signal of UART3. Currently GPIO3_C2 and C3 pins are assigned but TRM says that GPIO3_C0 and C1 are correct. Refer: RK3399 TRM v1.4 - Table 19-1 UART Interface Description Signed-off-by: Katsuhiro Suzuki Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index f54c855f8cdf..196ac9b78076 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -2543,12 +2543,12 @@ uart3_cts: uart3-cts { rockchip,pins = - <3 RK_PC2 2 &pcfg_pull_none>; + <3 RK_PC0 2 &pcfg_pull_none>; }; uart3_rts: uart3-rts { rockchip,pins = - <3 RK_PC3 2 &pcfg_pull_none>; + <3 RK_PC1 2 &pcfg_pull_none>; }; }; -- cgit v1.2.3 From d9931a1869fbd9d59bee30ef49d2356b468cdf47 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Thu, 21 Feb 2019 15:21:46 +0800 Subject: arm64: tegra: Fix timer node for Tegra210 Fix timer node to make it work with Tegra210 timer driver. Signed-off-by: Joseph Lo Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 6574396d2257..abbb686bd8ba 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -384,14 +384,22 @@ }; timer@60005000 { - compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer"; + compatible = "nvidia,tegra210-timer"; reg = <0x0 0x60005000 0x0 0x400>; - interrupts = , + interrupts = , + , , , , , - ; + , + , + , + , + , + , + , + ; clocks = <&tegra_car TEGRA210_CLK_TIMER>; clock-names = "timer"; }; -- cgit v1.2.3 From da77c6d92bf7c8815b143cc271c7f0b8af6aa15b Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Thu, 21 Feb 2019 15:21:47 +0800 Subject: arm64: tegra: Add CPU idle states properties for Tegra210 Add idle states properties for generic ARM CPU idle driver. This includes a cpu-sleep state which is the power down state of CPU cores. Signed-off-by: Joseph Lo Acked-by: Jon Hunter Acked-by: Daniel Lezcano Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index abbb686bd8ba..79cedd36ffad 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1371,24 +1371,43 @@ <&dfll>; clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; clock-latency = <300000>; + cpu-idle-states = <&CPU_SLEEP>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <1>; + cpu-idle-states = <&CPU_SLEEP>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <2>; + cpu-idle-states = <&CPU_SLEEP>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <3>; + cpu-idle-states = <&CPU_SLEEP>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000007>; + entry-latency-us = <100>; + exit-latency-us = <30>; + min-residency-us = <1000>; + wakeup-latency-us = <130>; + idle-state-name = "cpu-sleep"; + status = "disabled"; + }; }; }; -- cgit v1.2.3 From d2c19dd714fc6570a0a76a47fb2b1fd8b6d13659 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Thu, 21 Feb 2019 15:21:48 +0800 Subject: arm64: tegra: Enable CPU idle support for Jetson TX1 Enable CPU idle support for Jetson TX1 platform. Signed-off-by: Joseph Lo Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 053458a5db55..4dcd0d36189a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -305,6 +305,12 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + status = "okay"; + }; + }; }; psci { -- cgit v1.2.3 From 15e666968f8723d7984fe0e2799a23ced7ddaddd Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Thu, 21 Feb 2019 15:21:49 +0800 Subject: arm64: tegra: Enable CPU idle support for Smaug Enable CPU idle support for Smaug platform. Signed-off-by: Joseph Lo Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index a4b8f668a6d4..25fd65b5397a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1751,6 +1751,13 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + arm,psci-suspend-param = <0x00010007>; + status = "okay"; + }; + }; }; gpio-keys { -- cgit v1.2.3 From 3056c1ca29393c4aea79d53940c4b06774f9a5ce Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Thu, 21 Feb 2019 15:21:50 +0800 Subject: arm64: tegra: Enable CPU idle support for Shield Enable CPU idle support for Shield platform. Signed-off-by: Joseph Lo Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 3ddf173ccc18..88a4b9333d84 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1629,6 +1629,12 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + status = "okay"; + }; + }; }; psci { -- cgit v1.2.3 From 6c00cac1de5e99c5a7cb91bdfcef63987bd7da9f Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Fri, 1 Feb 2019 11:43:47 +0800 Subject: arm64: tegra: Add L2 cache topology to Tegra210 Add L2 cache and make it the next level of cache for each of the CPUs. Signed-off-by: Joseph Lo Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 79cedd36ffad..a550c0a4d572 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1372,6 +1372,7 @@ clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; clock-latency = <300000>; cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; }; cpu@1 { @@ -1379,6 +1380,7 @@ compatible = "arm,cortex-a57"; reg = <1>; cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; }; cpu@2 { @@ -1386,6 +1388,7 @@ compatible = "arm,cortex-a57"; reg = <2>; cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; }; cpu@3 { @@ -1393,6 +1396,7 @@ compatible = "arm,cortex-a57"; reg = <3>; cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; }; idle-states { @@ -1409,6 +1413,10 @@ status = "disabled"; }; }; + + L2: l2-cache { + compatible = "cache"; + }; }; timer { -- cgit v1.2.3 From 10ece0c14e11e63ed0e85eac2ac4caf8d727ad57 Mon Sep 17 00:00:00 2001 From: Sameer Pujar Date: Tue, 12 Mar 2019 19:55:04 +0530 Subject: arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1 These are currently mostly unused because we lack a proper audio driver on Tegra210. However, enabling them makes sure that at least their probe code paths are tested at runtime. Signed-off-by: Sameer Pujar Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 9fad0d27278e..5a57396b5948 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -99,4 +99,16 @@ pinctrl-0 = <&dvfs_pwm_active_state>; pinctrl-1 = <&dvfs_pwm_inactive_state>; }; + + aconnect@702c0000 { + status = "okay"; + + dma@702e2000 { + status = "okay"; + }; + + agic@702f9000 { + status = "okay"; + }; + }; }; -- cgit v1.2.3 From 7320733094cfae04acb8a0abbc4aa1d86877794d Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 26 Feb 2019 16:07:55 +0000 Subject: arm64: tegra: Add supply for temperature sensor on P2888 The VCC supply property is not populated for the temperature sensor on the P2888 board and so the following warning is observed on boot ... lm90 0-004c: 0-004c supply vcc not found, using dummy regulator On the P2888 board, the VCC supply for the temperature sensor is connected to the 'vdd_1v8ls' rail. Add the 'vcc-supply' property for the temperature sensor to prevent this warning message from occurring. Fixes: 8b457812f54b ('arm64: tegra: Add temperature sensor on P2888') Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 246c1ebbd055..0fd5bd29fbf9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -256,6 +256,7 @@ interrupt-parent = <&gpio>; interrupts = ; + vcc-supply = <&vdd_1v8ls>; #thermal-sensor-cells = <1>; }; -- cgit v1.2.3 From e9b001960cf56cfcd94a0bc9ae66a13ea00144c1 Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Thu, 11 Apr 2019 12:37:53 -0700 Subject: arm64: tegra: Fix default tap and trim values Default tap and trim values are incorrect for Tegra186 SDMMC4. This patch fixes them. Tested-by: Jon Hunter Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 97aeb946ed5e..472f55fe9488 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -317,8 +317,8 @@ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>; - nvidia,default-tap = <0x5>; - nvidia,default-trim = <0x9>; + nvidia,default-tap = <0x9>; + nvidia,default-trim = <0x5>; nvidia,dqs-trim = <63>; mmc-hs400-1_8v; status = "disabled"; -- cgit v1.2.3 From c4307836cb6b64bd1265c6bdd363d47ab6621fc0 Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Thu, 11 Apr 2019 12:37:54 -0700 Subject: arm64: tegra: Enable command queue for Tegra186 SDMMC4 The workaround for a hardware bug preventing this from working has been merged now, so command queue support can be enabled again for Tegra186. Tested-by: Jon Hunter Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 472f55fe9488..6e2b6ce99df2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -321,6 +321,7 @@ nvidia,default-trim = <0x5>; nvidia,dqs-trim = <63>; mmc-hs400-1_8v; + supports-cqe; status = "disabled"; }; -- cgit v1.2.3 From fbbad0287cec5e211bbd73c3e866ebd22a59b0d4 Mon Sep 17 00:00:00 2001 From: Yunfei Dong Date: Thu, 14 Feb 2019 10:24:52 +0800 Subject: arm64: dts: Using standard CCF interface to set vcodec clk Using standard CCF interface to set vdec/venc parent clk and clk rate. Signed-off-by: Yunfei Dong Signed-off-by: Qianqian Yan Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index c3c360161c5d..94529b7cf84c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -1307,6 +1307,15 @@ "vencpll", "venc_lt_sel", "vdec_bus_clk_src"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_VCODECPLL>; + assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; }; larb1: larb@16010000 { @@ -1372,6 +1381,10 @@ "venc_sel", "venc_lt_sel_src", "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, + <&topckgen CLK_TOP_UNIVPLL1_D2>; }; vencltsys: clock-controller@19000000 { -- cgit v1.2.3 From 8bf043635a1adf443fdc56849f8ef0bc23c65949 Mon Sep 17 00:00:00 2001 From: Zhiyong Tao Date: Mon, 1 Apr 2019 11:35:33 +0800 Subject: arm64: dts: mt8183: add pinctrl file This patch adds pinctrl file for mt8183. Signed-off-by: Zhiyong Tao Signed-off-by: Erin Lo Reviewed-by: Rob Herring Acked-by: Linus Walleij Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h | 1120 +++++++++++++++++++++++++ 1 file changed, 1120 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h new file mode 100644 index 000000000000..6221cd712718 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h @@ -0,0 +1,1120 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 MediaTek Inc. + * Author: Zhiyong Tao + * + */ + +#ifndef __MT8183_PINFUNC_H +#define __MT8183_PINFUNC_H + +#include + +#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define PINMUX_GPIO0__FUNC_MRG_SYNC (MTK_PIN_NO(0) | 1) +#define PINMUX_GPIO0__FUNC_PCM0_SYNC (MTK_PIN_NO(0) | 2) +#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 3) +#define PINMUX_GPIO0__FUNC_SRCLKENAI0 (MTK_PIN_NO(0) | 4) +#define PINMUX_GPIO0__FUNC_SCP_SPI2_CS (MTK_PIN_NO(0) | 5) +#define PINMUX_GPIO0__FUNC_I2S3_MCK (MTK_PIN_NO(0) | 6) +#define PINMUX_GPIO0__FUNC_SPI2_CSB (MTK_PIN_NO(0) | 7) + +#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define PINMUX_GPIO1__FUNC_MRG_CLK (MTK_PIN_NO(1) | 1) +#define PINMUX_GPIO1__FUNC_PCM0_CLK (MTK_PIN_NO(1) | 2) +#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 3) +#define PINMUX_GPIO1__FUNC_CLKM3 (MTK_PIN_NO(1) | 4) +#define PINMUX_GPIO1__FUNC_SCP_SPI2_MO (MTK_PIN_NO(1) | 5) +#define PINMUX_GPIO1__FUNC_I2S3_BCK (MTK_PIN_NO(1) | 6) +#define PINMUX_GPIO1__FUNC_SPI2_MO (MTK_PIN_NO(1) | 7) + +#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define PINMUX_GPIO2__FUNC_MRG_DO (MTK_PIN_NO(2) | 1) +#define PINMUX_GPIO2__FUNC_PCM0_DO (MTK_PIN_NO(2) | 2) +#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 3) +#define PINMUX_GPIO2__FUNC_SCL6 (MTK_PIN_NO(2) | 4) +#define PINMUX_GPIO2__FUNC_SCP_SPI2_CK (MTK_PIN_NO(2) | 5) +#define PINMUX_GPIO2__FUNC_I2S3_LRCK (MTK_PIN_NO(2) | 6) +#define PINMUX_GPIO2__FUNC_SPI2_CLK (MTK_PIN_NO(2) | 7) + +#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define PINMUX_GPIO3__FUNC_MRG_DI (MTK_PIN_NO(3) | 1) +#define PINMUX_GPIO3__FUNC_PCM0_DI (MTK_PIN_NO(3) | 2) +#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 3) +#define PINMUX_GPIO3__FUNC_SDA6 (MTK_PIN_NO(3) | 4) +#define PINMUX_GPIO3__FUNC_TDM_MCK (MTK_PIN_NO(3) | 5) +#define PINMUX_GPIO3__FUNC_I2S3_DO (MTK_PIN_NO(3) | 6) +#define PINMUX_GPIO3__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(3) | 7) + +#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define PINMUX_GPIO4__FUNC_PWM_B (MTK_PIN_NO(4) | 1) +#define PINMUX_GPIO4__FUNC_I2S0_MCK (MTK_PIN_NO(4) | 2) +#define PINMUX_GPIO4__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(4) | 3) +#define PINMUX_GPIO4__FUNC_MD_URXD1 (MTK_PIN_NO(4) | 4) +#define PINMUX_GPIO4__FUNC_TDM_BCK (MTK_PIN_NO(4) | 5) +#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 6) +#define PINMUX_GPIO4__FUNC_DAP_MD32_SWD (MTK_PIN_NO(4) | 7) + +#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define PINMUX_GPIO5__FUNC_PWM_C (MTK_PIN_NO(5) | 1) +#define PINMUX_GPIO5__FUNC_I2S0_BCK (MTK_PIN_NO(5) | 2) +#define PINMUX_GPIO5__FUNC_SSPM_URXD_AO (MTK_PIN_NO(5) | 3) +#define PINMUX_GPIO5__FUNC_MD_UTXD1 (MTK_PIN_NO(5) | 4) +#define PINMUX_GPIO5__FUNC_TDM_LRCK (MTK_PIN_NO(5) | 5) +#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 6) +#define PINMUX_GPIO5__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(5) | 7) + +#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define PINMUX_GPIO6__FUNC_PWM_A (MTK_PIN_NO(6) | 1) +#define PINMUX_GPIO6__FUNC_I2S0_LRCK (MTK_PIN_NO(6) | 2) +#define PINMUX_GPIO6__FUNC_IDDIG (MTK_PIN_NO(6) | 3) +#define PINMUX_GPIO6__FUNC_MD_URXD0 (MTK_PIN_NO(6) | 4) +#define PINMUX_GPIO6__FUNC_TDM_DATA0 (MTK_PIN_NO(6) | 5) +#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 6) +#define PINMUX_GPIO6__FUNC_CMFLASH (MTK_PIN_NO(6) | 7) + +#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define PINMUX_GPIO7__FUNC_SPI1_B_MI (MTK_PIN_NO(7) | 1) +#define PINMUX_GPIO7__FUNC_I2S0_DI (MTK_PIN_NO(7) | 2) +#define PINMUX_GPIO7__FUNC_USB_DRVVBUS (MTK_PIN_NO(7) | 3) +#define PINMUX_GPIO7__FUNC_MD_UTXD0 (MTK_PIN_NO(7) | 4) +#define PINMUX_GPIO7__FUNC_TDM_DATA1 (MTK_PIN_NO(7) | 5) +#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 6) +#define PINMUX_GPIO7__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(7) | 7) + +#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define PINMUX_GPIO8__FUNC_SPI1_B_CSB (MTK_PIN_NO(8) | 1) +#define PINMUX_GPIO8__FUNC_ANT_SEL3 (MTK_PIN_NO(8) | 2) +#define PINMUX_GPIO8__FUNC_SCL7 (MTK_PIN_NO(8) | 3) +#define PINMUX_GPIO8__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(8) | 4) +#define PINMUX_GPIO8__FUNC_TDM_DATA2 (MTK_PIN_NO(8) | 5) +#define PINMUX_GPIO8__FUNC_MD_INT0 (MTK_PIN_NO(8) | 6) +#define PINMUX_GPIO8__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(8) | 7) + +#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define PINMUX_GPIO9__FUNC_SPI1_B_MO (MTK_PIN_NO(9) | 1) +#define PINMUX_GPIO9__FUNC_ANT_SEL4 (MTK_PIN_NO(9) | 2) +#define PINMUX_GPIO9__FUNC_CMMCLK2 (MTK_PIN_NO(9) | 3) +#define PINMUX_GPIO9__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(9) | 4) +#define PINMUX_GPIO9__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(9) | 5) +#define PINMUX_GPIO9__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(9) | 6) +#define PINMUX_GPIO9__FUNC_DBG_MON_B10 (MTK_PIN_NO(9) | 7) + +#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define PINMUX_GPIO10__FUNC_SPI1_B_CLK (MTK_PIN_NO(10) | 1) +#define PINMUX_GPIO10__FUNC_ANT_SEL5 (MTK_PIN_NO(10) | 2) +#define PINMUX_GPIO10__FUNC_CMMCLK3 (MTK_PIN_NO(10) | 3) +#define PINMUX_GPIO10__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(10) | 4) +#define PINMUX_GPIO10__FUNC_TDM_DATA3 (MTK_PIN_NO(10) | 5) +#define PINMUX_GPIO10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 6) +#define PINMUX_GPIO10__FUNC_DBG_MON_B11 (MTK_PIN_NO(10) | 7) + +#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define PINMUX_GPIO11__FUNC_TP_URXD1_AO (MTK_PIN_NO(11) | 1) +#define PINMUX_GPIO11__FUNC_IDDIG (MTK_PIN_NO(11) | 2) +#define PINMUX_GPIO11__FUNC_SCL6 (MTK_PIN_NO(11) | 3) +#define PINMUX_GPIO11__FUNC_UCTS1 (MTK_PIN_NO(11) | 4) +#define PINMUX_GPIO11__FUNC_UCTS0 (MTK_PIN_NO(11) | 5) +#define PINMUX_GPIO11__FUNC_SRCLKENAI1 (MTK_PIN_NO(11) | 6) +#define PINMUX_GPIO11__FUNC_I2S5_MCK (MTK_PIN_NO(11) | 7) + +#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define PINMUX_GPIO12__FUNC_TP_UTXD1_AO (MTK_PIN_NO(12) | 1) +#define PINMUX_GPIO12__FUNC_USB_DRVVBUS (MTK_PIN_NO(12) | 2) +#define PINMUX_GPIO12__FUNC_SDA6 (MTK_PIN_NO(12) | 3) +#define PINMUX_GPIO12__FUNC_URTS1 (MTK_PIN_NO(12) | 4) +#define PINMUX_GPIO12__FUNC_URTS0 (MTK_PIN_NO(12) | 5) +#define PINMUX_GPIO12__FUNC_I2S2_DI2 (MTK_PIN_NO(12) | 6) +#define PINMUX_GPIO12__FUNC_I2S5_BCK (MTK_PIN_NO(12) | 7) + +#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define PINMUX_GPIO13__FUNC_DBPI_D0 (MTK_PIN_NO(13) | 1) +#define PINMUX_GPIO13__FUNC_SPI5_MI (MTK_PIN_NO(13) | 2) +#define PINMUX_GPIO13__FUNC_PCM0_SYNC (MTK_PIN_NO(13) | 3) +#define PINMUX_GPIO13__FUNC_MD_URXD0 (MTK_PIN_NO(13) | 4) +#define PINMUX_GPIO13__FUNC_ANT_SEL3 (MTK_PIN_NO(13) | 5) +#define PINMUX_GPIO13__FUNC_I2S0_MCK (MTK_PIN_NO(13) | 6) +#define PINMUX_GPIO13__FUNC_DBG_MON_B15 (MTK_PIN_NO(13) | 7) + +#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define PINMUX_GPIO14__FUNC_DBPI_D1 (MTK_PIN_NO(14) | 1) +#define PINMUX_GPIO14__FUNC_SPI5_CSB (MTK_PIN_NO(14) | 2) +#define PINMUX_GPIO14__FUNC_PCM0_CLK (MTK_PIN_NO(14) | 3) +#define PINMUX_GPIO14__FUNC_MD_UTXD0 (MTK_PIN_NO(14) | 4) +#define PINMUX_GPIO14__FUNC_ANT_SEL4 (MTK_PIN_NO(14) | 5) +#define PINMUX_GPIO14__FUNC_I2S0_BCK (MTK_PIN_NO(14) | 6) +#define PINMUX_GPIO14__FUNC_DBG_MON_B16 (MTK_PIN_NO(14) | 7) + +#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define PINMUX_GPIO15__FUNC_DBPI_D2 (MTK_PIN_NO(15) | 1) +#define PINMUX_GPIO15__FUNC_SPI5_MO (MTK_PIN_NO(15) | 2) +#define PINMUX_GPIO15__FUNC_PCM0_DO (MTK_PIN_NO(15) | 3) +#define PINMUX_GPIO15__FUNC_MD_URXD1 (MTK_PIN_NO(15) | 4) +#define PINMUX_GPIO15__FUNC_ANT_SEL5 (MTK_PIN_NO(15) | 5) +#define PINMUX_GPIO15__FUNC_I2S0_LRCK (MTK_PIN_NO(15) | 6) +#define PINMUX_GPIO15__FUNC_DBG_MON_B17 (MTK_PIN_NO(15) | 7) + +#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define PINMUX_GPIO16__FUNC_DBPI_D3 (MTK_PIN_NO(16) | 1) +#define PINMUX_GPIO16__FUNC_SPI5_CLK (MTK_PIN_NO(16) | 2) +#define PINMUX_GPIO16__FUNC_PCM0_DI (MTK_PIN_NO(16) | 3) +#define PINMUX_GPIO16__FUNC_MD_UTXD1 (MTK_PIN_NO(16) | 4) +#define PINMUX_GPIO16__FUNC_ANT_SEL6 (MTK_PIN_NO(16) | 5) +#define PINMUX_GPIO16__FUNC_I2S0_DI (MTK_PIN_NO(16) | 6) +#define PINMUX_GPIO16__FUNC_DBG_MON_B23 (MTK_PIN_NO(16) | 7) + +#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define PINMUX_GPIO17__FUNC_DBPI_D4 (MTK_PIN_NO(17) | 1) +#define PINMUX_GPIO17__FUNC_SPI4_MI (MTK_PIN_NO(17) | 2) +#define PINMUX_GPIO17__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(17) | 3) +#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 4) +#define PINMUX_GPIO17__FUNC_ANT_SEL7 (MTK_PIN_NO(17) | 5) +#define PINMUX_GPIO17__FUNC_I2S3_MCK (MTK_PIN_NO(17) | 6) +#define PINMUX_GPIO17__FUNC_DBG_MON_A1 (MTK_PIN_NO(17) | 7) + +#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define PINMUX_GPIO18__FUNC_DBPI_D5 (MTK_PIN_NO(18) | 1) +#define PINMUX_GPIO18__FUNC_SPI4_CSB (MTK_PIN_NO(18) | 2) +#define PINMUX_GPIO18__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(18) | 3) +#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 4) +#define PINMUX_GPIO18__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(18) | 5) +#define PINMUX_GPIO18__FUNC_I2S3_BCK (MTK_PIN_NO(18) | 6) +#define PINMUX_GPIO18__FUNC_DBG_MON_A2 (MTK_PIN_NO(18) | 7) + +#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define PINMUX_GPIO19__FUNC_DBPI_D6 (MTK_PIN_NO(19) | 1) +#define PINMUX_GPIO19__FUNC_SPI4_MO (MTK_PIN_NO(19) | 2) +#define PINMUX_GPIO19__FUNC_CONN_MCU_TDO (MTK_PIN_NO(19) | 3) +#define PINMUX_GPIO19__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(19) | 4) +#define PINMUX_GPIO19__FUNC_URXD1 (MTK_PIN_NO(19) | 5) +#define PINMUX_GPIO19__FUNC_I2S3_LRCK (MTK_PIN_NO(19) | 6) +#define PINMUX_GPIO19__FUNC_DBG_MON_A3 (MTK_PIN_NO(19) | 7) + +#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define PINMUX_GPIO20__FUNC_DBPI_D7 (MTK_PIN_NO(20) | 1) +#define PINMUX_GPIO20__FUNC_SPI4_CLK (MTK_PIN_NO(20) | 2) +#define PINMUX_GPIO20__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(20) | 3) +#define PINMUX_GPIO20__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(20) | 4) +#define PINMUX_GPIO20__FUNC_UTXD1 (MTK_PIN_NO(20) | 5) +#define PINMUX_GPIO20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 6) +#define PINMUX_GPIO20__FUNC_DBG_MON_A19 (MTK_PIN_NO(20) | 7) + +#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define PINMUX_GPIO21__FUNC_DBPI_D8 (MTK_PIN_NO(21) | 1) +#define PINMUX_GPIO21__FUNC_SPI3_MI (MTK_PIN_NO(21) | 2) +#define PINMUX_GPIO21__FUNC_CONN_MCU_TMS (MTK_PIN_NO(21) | 3) +#define PINMUX_GPIO21__FUNC_DAP_MD32_SWD (MTK_PIN_NO(21) | 4) +#define PINMUX_GPIO21__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(21) | 5) +#define PINMUX_GPIO21__FUNC_I2S2_MCK (MTK_PIN_NO(21) | 6) +#define PINMUX_GPIO21__FUNC_DBG_MON_B5 (MTK_PIN_NO(21) | 7) + +#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define PINMUX_GPIO22__FUNC_DBPI_D9 (MTK_PIN_NO(22) | 1) +#define PINMUX_GPIO22__FUNC_SPI3_CSB (MTK_PIN_NO(22) | 2) +#define PINMUX_GPIO22__FUNC_CONN_MCU_TCK (MTK_PIN_NO(22) | 3) +#define PINMUX_GPIO22__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(22) | 4) +#define PINMUX_GPIO22__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(22) | 5) +#define PINMUX_GPIO22__FUNC_I2S2_BCK (MTK_PIN_NO(22) | 6) +#define PINMUX_GPIO22__FUNC_DBG_MON_B6 (MTK_PIN_NO(22) | 7) + +#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define PINMUX_GPIO23__FUNC_DBPI_D10 (MTK_PIN_NO(23) | 1) +#define PINMUX_GPIO23__FUNC_SPI3_MO (MTK_PIN_NO(23) | 2) +#define PINMUX_GPIO23__FUNC_CONN_MCU_TDI (MTK_PIN_NO(23) | 3) +#define PINMUX_GPIO23__FUNC_UCTS1 (MTK_PIN_NO(23) | 4) +#define PINMUX_GPIO23__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5) +#define PINMUX_GPIO23__FUNC_I2S2_LRCK (MTK_PIN_NO(23) | 6) +#define PINMUX_GPIO23__FUNC_DBG_MON_B7 (MTK_PIN_NO(23) | 7) + +#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define PINMUX_GPIO24__FUNC_DBPI_D11 (MTK_PIN_NO(24) | 1) +#define PINMUX_GPIO24__FUNC_SPI3_CLK (MTK_PIN_NO(24) | 2) +#define PINMUX_GPIO24__FUNC_SRCLKENAI0 (MTK_PIN_NO(24) | 3) +#define PINMUX_GPIO24__FUNC_URTS1 (MTK_PIN_NO(24) | 4) +#define PINMUX_GPIO24__FUNC_IO_JTAG_TCK (MTK_PIN_NO(24) | 5) +#define PINMUX_GPIO24__FUNC_I2S2_DI (MTK_PIN_NO(24) | 6) +#define PINMUX_GPIO24__FUNC_DBG_MON_B31 (MTK_PIN_NO(24) | 7) + +#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define PINMUX_GPIO25__FUNC_DBPI_HSYNC (MTK_PIN_NO(25) | 1) +#define PINMUX_GPIO25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 2) +#define PINMUX_GPIO25__FUNC_SCL6 (MTK_PIN_NO(25) | 3) +#define PINMUX_GPIO25__FUNC_KPCOL2 (MTK_PIN_NO(25) | 4) +#define PINMUX_GPIO25__FUNC_IO_JTAG_TMS (MTK_PIN_NO(25) | 5) +#define PINMUX_GPIO25__FUNC_I2S1_MCK (MTK_PIN_NO(25) | 6) +#define PINMUX_GPIO25__FUNC_DBG_MON_B0 (MTK_PIN_NO(25) | 7) + +#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define PINMUX_GPIO26__FUNC_DBPI_VSYNC (MTK_PIN_NO(26) | 1) +#define PINMUX_GPIO26__FUNC_ANT_SEL1 (MTK_PIN_NO(26) | 2) +#define PINMUX_GPIO26__FUNC_SDA6 (MTK_PIN_NO(26) | 3) +#define PINMUX_GPIO26__FUNC_KPROW2 (MTK_PIN_NO(26) | 4) +#define PINMUX_GPIO26__FUNC_IO_JTAG_TDI (MTK_PIN_NO(26) | 5) +#define PINMUX_GPIO26__FUNC_I2S1_BCK (MTK_PIN_NO(26) | 6) +#define PINMUX_GPIO26__FUNC_DBG_MON_B1 (MTK_PIN_NO(26) | 7) + +#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define PINMUX_GPIO27__FUNC_DBPI_DE (MTK_PIN_NO(27) | 1) +#define PINMUX_GPIO27__FUNC_ANT_SEL2 (MTK_PIN_NO(27) | 2) +#define PINMUX_GPIO27__FUNC_SCL7 (MTK_PIN_NO(27) | 3) +#define PINMUX_GPIO27__FUNC_DMIC_CLK (MTK_PIN_NO(27) | 4) +#define PINMUX_GPIO27__FUNC_IO_JTAG_TDO (MTK_PIN_NO(27) | 5) +#define PINMUX_GPIO27__FUNC_I2S1_LRCK (MTK_PIN_NO(27) | 6) +#define PINMUX_GPIO27__FUNC_DBG_MON_B9 (MTK_PIN_NO(27) | 7) + +#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define PINMUX_GPIO28__FUNC_DBPI_CK (MTK_PIN_NO(28) | 1) +#define PINMUX_GPIO28__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(28) | 2) +#define PINMUX_GPIO28__FUNC_SDA7 (MTK_PIN_NO(28) | 3) +#define PINMUX_GPIO28__FUNC_DMIC_DAT (MTK_PIN_NO(28) | 4) +#define PINMUX_GPIO28__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(28) | 5) +#define PINMUX_GPIO28__FUNC_I2S1_DO (MTK_PIN_NO(28) | 6) +#define PINMUX_GPIO28__FUNC_DBG_MON_B32 (MTK_PIN_NO(28) | 7) + +#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define PINMUX_GPIO29__FUNC_MSDC1_CLK (MTK_PIN_NO(29) | 1) +#define PINMUX_GPIO29__FUNC_IO_JTAG_TCK (MTK_PIN_NO(29) | 2) +#define PINMUX_GPIO29__FUNC_UDI_TCK (MTK_PIN_NO(29) | 3) +#define PINMUX_GPIO29__FUNC_CONN_DSP_JCK (MTK_PIN_NO(29) | 4) +#define PINMUX_GPIO29__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(29) | 5) +#define PINMUX_GPIO29__FUNC_PCM1_CLK (MTK_PIN_NO(29) | 6) +#define PINMUX_GPIO29__FUNC_DBG_MON_A6 (MTK_PIN_NO(29) | 7) + +#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define PINMUX_GPIO30__FUNC_MSDC1_DAT3 (MTK_PIN_NO(30) | 1) +#define PINMUX_GPIO30__FUNC_DAP_MD32_SWD (MTK_PIN_NO(30) | 2) +#define PINMUX_GPIO30__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(30) | 3) +#define PINMUX_GPIO30__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(30) | 4) +#define PINMUX_GPIO30__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(30) | 5) +#define PINMUX_GPIO30__FUNC_PCM1_DI (MTK_PIN_NO(30) | 6) +#define PINMUX_GPIO30__FUNC_DBG_MON_A7 (MTK_PIN_NO(30) | 7) + +#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define PINMUX_GPIO31__FUNC_MSDC1_CMD (MTK_PIN_NO(31) | 1) +#define PINMUX_GPIO31__FUNC_IO_JTAG_TMS (MTK_PIN_NO(31) | 2) +#define PINMUX_GPIO31__FUNC_UDI_TMS (MTK_PIN_NO(31) | 3) +#define PINMUX_GPIO31__FUNC_CONN_DSP_JMS (MTK_PIN_NO(31) | 4) +#define PINMUX_GPIO31__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(31) | 5) +#define PINMUX_GPIO31__FUNC_PCM1_SYNC (MTK_PIN_NO(31) | 6) +#define PINMUX_GPIO31__FUNC_DBG_MON_A8 (MTK_PIN_NO(31) | 7) + +#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define PINMUX_GPIO32__FUNC_MSDC1_DAT0 (MTK_PIN_NO(32) | 1) +#define PINMUX_GPIO32__FUNC_IO_JTAG_TDI (MTK_PIN_NO(32) | 2) +#define PINMUX_GPIO32__FUNC_UDI_TDI (MTK_PIN_NO(32) | 3) +#define PINMUX_GPIO32__FUNC_CONN_DSP_JDI (MTK_PIN_NO(32) | 4) +#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(32) | 5) +#define PINMUX_GPIO32__FUNC_PCM1_DO0 (MTK_PIN_NO(32) | 6) +#define PINMUX_GPIO32__FUNC_DBG_MON_A9 (MTK_PIN_NO(32) | 7) + +#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define PINMUX_GPIO33__FUNC_MSDC1_DAT2 (MTK_PIN_NO(33) | 1) +#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 2) +#define PINMUX_GPIO33__FUNC_UDI_NTRST (MTK_PIN_NO(33) | 3) +#define PINMUX_GPIO33__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(33) | 4) +#define PINMUX_GPIO33__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(33) | 5) +#define PINMUX_GPIO33__FUNC_PCM1_DO2 (MTK_PIN_NO(33) | 6) +#define PINMUX_GPIO33__FUNC_DBG_MON_A10 (MTK_PIN_NO(33) | 7) + +#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define PINMUX_GPIO34__FUNC_MSDC1_DAT1 (MTK_PIN_NO(34) | 1) +#define PINMUX_GPIO34__FUNC_IO_JTAG_TDO (MTK_PIN_NO(34) | 2) +#define PINMUX_GPIO34__FUNC_UDI_TDO (MTK_PIN_NO(34) | 3) +#define PINMUX_GPIO34__FUNC_CONN_DSP_JDO (MTK_PIN_NO(34) | 4) +#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(34) | 5) +#define PINMUX_GPIO34__FUNC_PCM1_DO1 (MTK_PIN_NO(34) | 6) +#define PINMUX_GPIO34__FUNC_DBG_MON_A11 (MTK_PIN_NO(34) | 7) + +#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define PINMUX_GPIO35__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(35) | 1) +#define PINMUX_GPIO35__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(35) | 2) +#define PINMUX_GPIO35__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(35) | 3) +#define PINMUX_GPIO35__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(35) | 5) +#define PINMUX_GPIO35__FUNC_CONN_DSP_JMS (MTK_PIN_NO(35) | 6) +#define PINMUX_GPIO35__FUNC_DBG_MON_A28 (MTK_PIN_NO(35) | 7) + +#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define PINMUX_GPIO36__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(36) | 1) +#define PINMUX_GPIO36__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(36) | 2) +#define PINMUX_GPIO36__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(36) | 3) +#define PINMUX_GPIO36__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(36) | 4) +#define PINMUX_GPIO36__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(36) | 5) +#define PINMUX_GPIO36__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(36) | 6) +#define PINMUX_GPIO36__FUNC_DBG_MON_A29 (MTK_PIN_NO(36) | 7) + +#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define PINMUX_GPIO37__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(37) | 1) +#define PINMUX_GPIO37__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(37) | 2) +#define PINMUX_GPIO37__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(37) | 3) +#define PINMUX_GPIO37__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(37) | 5) +#define PINMUX_GPIO37__FUNC_CONN_DSP_JDO (MTK_PIN_NO(37) | 6) +#define PINMUX_GPIO37__FUNC_DBG_MON_A30 (MTK_PIN_NO(37) | 7) + +#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define PINMUX_GPIO38__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(38) | 1) +#define PINMUX_GPIO38__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(38) | 3) +#define PINMUX_GPIO38__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(38) | 4) +#define PINMUX_GPIO38__FUNC_DBG_MON_A20 (MTK_PIN_NO(38) | 7) + +#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define PINMUX_GPIO39__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(39) | 1) +#define PINMUX_GPIO39__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(39) | 2) +#define PINMUX_GPIO39__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(39) | 3) +#define PINMUX_GPIO39__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(39) | 5) +#define PINMUX_GPIO39__FUNC_CONN_DSP_JCK (MTK_PIN_NO(39) | 6) +#define PINMUX_GPIO39__FUNC_DBG_MON_A31 (MTK_PIN_NO(39) | 7) + +#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define PINMUX_GPIO40__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(40) | 1) +#define PINMUX_GPIO40__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(40) | 2) +#define PINMUX_GPIO40__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(40) | 3) +#define PINMUX_GPIO40__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(40) | 5) +#define PINMUX_GPIO40__FUNC_CONN_DSP_JDI (MTK_PIN_NO(40) | 6) +#define PINMUX_GPIO40__FUNC_DBG_MON_A32 (MTK_PIN_NO(40) | 7) + +#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define PINMUX_GPIO41__FUNC_IDDIG (MTK_PIN_NO(41) | 1) +#define PINMUX_GPIO41__FUNC_URXD1 (MTK_PIN_NO(41) | 2) +#define PINMUX_GPIO41__FUNC_UCTS0 (MTK_PIN_NO(41) | 3) +#define PINMUX_GPIO41__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(41) | 4) +#define PINMUX_GPIO41__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 5) +#define PINMUX_GPIO41__FUNC_DMIC_CLK (MTK_PIN_NO(41) | 6) + +#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define PINMUX_GPIO42__FUNC_USB_DRVVBUS (MTK_PIN_NO(42) | 1) +#define PINMUX_GPIO42__FUNC_UTXD1 (MTK_PIN_NO(42) | 2) +#define PINMUX_GPIO42__FUNC_URTS0 (MTK_PIN_NO(42) | 3) +#define PINMUX_GPIO42__FUNC_SSPM_URXD_AO (MTK_PIN_NO(42) | 4) +#define PINMUX_GPIO42__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(42) | 5) +#define PINMUX_GPIO42__FUNC_DMIC_DAT (MTK_PIN_NO(42) | 6) + +#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define PINMUX_GPIO43__FUNC_DISP_PWM (MTK_PIN_NO(43) | 1) + +#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define PINMUX_GPIO44__FUNC_DSI_TE (MTK_PIN_NO(44) | 1) + +#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define PINMUX_GPIO45__FUNC_LCM_RST (MTK_PIN_NO(45) | 1) + +#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define PINMUX_GPIO46__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(46) | 1) +#define PINMUX_GPIO46__FUNC_URXD1 (MTK_PIN_NO(46) | 2) +#define PINMUX_GPIO46__FUNC_UCTS1 (MTK_PIN_NO(46) | 3) +#define PINMUX_GPIO46__FUNC_CCU_UTXD_AO (MTK_PIN_NO(46) | 4) +#define PINMUX_GPIO46__FUNC_TP_UCTS1_AO (MTK_PIN_NO(46) | 5) +#define PINMUX_GPIO46__FUNC_IDDIG (MTK_PIN_NO(46) | 6) +#define PINMUX_GPIO46__FUNC_I2S5_LRCK (MTK_PIN_NO(46) | 7) + +#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define PINMUX_GPIO47__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(47) | 1) +#define PINMUX_GPIO47__FUNC_UTXD1 (MTK_PIN_NO(47) | 2) +#define PINMUX_GPIO47__FUNC_URTS1 (MTK_PIN_NO(47) | 3) +#define PINMUX_GPIO47__FUNC_CCU_URXD_AO (MTK_PIN_NO(47) | 4) +#define PINMUX_GPIO47__FUNC_TP_URTS1_AO (MTK_PIN_NO(47) | 5) +#define PINMUX_GPIO47__FUNC_USB_DRVVBUS (MTK_PIN_NO(47) | 6) +#define PINMUX_GPIO47__FUNC_I2S5_DO (MTK_PIN_NO(47) | 7) + +#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define PINMUX_GPIO48__FUNC_SCL5 (MTK_PIN_NO(48) | 1) + +#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define PINMUX_GPIO49__FUNC_SDA5 (MTK_PIN_NO(49) | 1) + +#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define PINMUX_GPIO50__FUNC_SCL3 (MTK_PIN_NO(50) | 1) + +#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define PINMUX_GPIO51__FUNC_SDA3 (MTK_PIN_NO(51) | 1) + +#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define PINMUX_GPIO52__FUNC_BPI_ANT2 (MTK_PIN_NO(52) | 1) + +#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define PINMUX_GPIO53__FUNC_BPI_ANT0 (MTK_PIN_NO(53) | 1) + +#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define PINMUX_GPIO54__FUNC_BPI_OLAT1 (MTK_PIN_NO(54) | 1) + +#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define PINMUX_GPIO55__FUNC_BPI_BUS8 (MTK_PIN_NO(55) | 1) + +#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define PINMUX_GPIO56__FUNC_BPI_BUS9 (MTK_PIN_NO(56) | 1) +#define PINMUX_GPIO56__FUNC_SCL_6306 (MTK_PIN_NO(56) | 2) + +#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define PINMUX_GPIO57__FUNC_BPI_BUS10 (MTK_PIN_NO(57) | 1) +#define PINMUX_GPIO57__FUNC_SDA_6306 (MTK_PIN_NO(57) | 2) + +#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define PINMUX_GPIO58__FUNC_RFIC0_BSI_D2 (MTK_PIN_NO(58) | 1) +#define PINMUX_GPIO58__FUNC_SPM_BSI_D2 (MTK_PIN_NO(58) | 2) +#define PINMUX_GPIO58__FUNC_PWM_B (MTK_PIN_NO(58) | 3) + +#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define PINMUX_GPIO59__FUNC_RFIC0_BSI_D1 (MTK_PIN_NO(59) | 1) +#define PINMUX_GPIO59__FUNC_SPM_BSI_D1 (MTK_PIN_NO(59) | 2) + +#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define PINMUX_GPIO60__FUNC_RFIC0_BSI_D0 (MTK_PIN_NO(60) | 1) +#define PINMUX_GPIO60__FUNC_SPM_BSI_D0 (MTK_PIN_NO(60) | 2) + +#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define PINMUX_GPIO61__FUNC_MIPI1_SDATA (MTK_PIN_NO(61) | 1) + +#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define PINMUX_GPIO62__FUNC_MIPI1_SCLK (MTK_PIN_NO(62) | 1) + +#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define PINMUX_GPIO63__FUNC_MIPI0_SDATA (MTK_PIN_NO(63) | 1) + +#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define PINMUX_GPIO64__FUNC_MIPI0_SCLK (MTK_PIN_NO(64) | 1) + +#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define PINMUX_GPIO65__FUNC_MIPI3_SDATA (MTK_PIN_NO(65) | 1) +#define PINMUX_GPIO65__FUNC_BPI_OLAT2 (MTK_PIN_NO(65) | 2) + +#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define PINMUX_GPIO66__FUNC_MIPI3_SCLK (MTK_PIN_NO(66) | 1) +#define PINMUX_GPIO66__FUNC_BPI_OLAT3 (MTK_PIN_NO(66) | 2) + +#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define PINMUX_GPIO67__FUNC_MIPI2_SDATA (MTK_PIN_NO(67) | 1) + +#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define PINMUX_GPIO68__FUNC_MIPI2_SCLK (MTK_PIN_NO(68) | 1) + +#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define PINMUX_GPIO69__FUNC_BPI_BUS7 (MTK_PIN_NO(69) | 1) + +#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define PINMUX_GPIO70__FUNC_BPI_BUS6 (MTK_PIN_NO(70) | 1) + +#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define PINMUX_GPIO71__FUNC_BPI_BUS5 (MTK_PIN_NO(71) | 1) + +#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define PINMUX_GPIO72__FUNC_BPI_BUS4 (MTK_PIN_NO(72) | 1) + +#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define PINMUX_GPIO73__FUNC_BPI_BUS3 (MTK_PIN_NO(73) | 1) + +#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define PINMUX_GPIO74__FUNC_BPI_BUS2 (MTK_PIN_NO(74) | 1) + +#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define PINMUX_GPIO75__FUNC_BPI_BUS1 (MTK_PIN_NO(75) | 1) + +#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define PINMUX_GPIO76__FUNC_BPI_BUS0 (MTK_PIN_NO(76) | 1) + +#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define PINMUX_GPIO77__FUNC_BPI_ANT1 (MTK_PIN_NO(77) | 1) + +#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define PINMUX_GPIO78__FUNC_BPI_OLAT0 (MTK_PIN_NO(78) | 1) + +#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define PINMUX_GPIO79__FUNC_BPI_PA_VM1 (MTK_PIN_NO(79) | 1) +#define PINMUX_GPIO79__FUNC_MIPI4_SDATA (MTK_PIN_NO(79) | 2) + +#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define PINMUX_GPIO80__FUNC_BPI_PA_VM0 (MTK_PIN_NO(80) | 1) +#define PINMUX_GPIO80__FUNC_MIPI4_SCLK (MTK_PIN_NO(80) | 2) + +#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define PINMUX_GPIO81__FUNC_SDA1 (MTK_PIN_NO(81) | 1) + +#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define PINMUX_GPIO82__FUNC_SDA0 (MTK_PIN_NO(82) | 1) + +#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define PINMUX_GPIO83__FUNC_SCL0 (MTK_PIN_NO(83) | 1) + +#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define PINMUX_GPIO84__FUNC_SCL1 (MTK_PIN_NO(84) | 1) + +#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define PINMUX_GPIO85__FUNC_SPI0_MI (MTK_PIN_NO(85) | 1) +#define PINMUX_GPIO85__FUNC_SCP_SPI0_MI (MTK_PIN_NO(85) | 2) +#define PINMUX_GPIO85__FUNC_CLKM3 (MTK_PIN_NO(85) | 3) +#define PINMUX_GPIO85__FUNC_I2S1_BCK (MTK_PIN_NO(85) | 4) +#define PINMUX_GPIO85__FUNC_MFG_DFD_JTAG_TDO (MTK_PIN_NO(85) | 5) +#define PINMUX_GPIO85__FUNC_DFD_TDO (MTK_PIN_NO(85) | 6) +#define PINMUX_GPIO85__FUNC_JTDO_SEL1 (MTK_PIN_NO(85) | 7) + +#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define PINMUX_GPIO86__FUNC_SPI0_CSB (MTK_PIN_NO(86) | 1) +#define PINMUX_GPIO86__FUNC_SCP_SPI0_CS (MTK_PIN_NO(86) | 2) +#define PINMUX_GPIO86__FUNC_CLKM0 (MTK_PIN_NO(86) | 3) +#define PINMUX_GPIO86__FUNC_I2S1_LRCK (MTK_PIN_NO(86) | 4) +#define PINMUX_GPIO86__FUNC_MFG_DFD_JTAG_TMS (MTK_PIN_NO(86) | 5) +#define PINMUX_GPIO86__FUNC_DFD_TMS (MTK_PIN_NO(86) | 6) +#define PINMUX_GPIO86__FUNC_JTMS_SEL1 (MTK_PIN_NO(86) | 7) + +#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define PINMUX_GPIO87__FUNC_SPI0_MO (MTK_PIN_NO(87) | 1) +#define PINMUX_GPIO87__FUNC_SCP_SPI0_MO (MTK_PIN_NO(87) | 2) +#define PINMUX_GPIO87__FUNC_SDA1 (MTK_PIN_NO(87) | 3) +#define PINMUX_GPIO87__FUNC_I2S1_DO (MTK_PIN_NO(87) | 4) +#define PINMUX_GPIO87__FUNC_MFG_DFD_JTAG_TDI (MTK_PIN_NO(87) | 5) +#define PINMUX_GPIO87__FUNC_DFD_TDI (MTK_PIN_NO(87) | 6) +#define PINMUX_GPIO87__FUNC_JTDI_SEL1 (MTK_PIN_NO(87) | 7) + +#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define PINMUX_GPIO88__FUNC_SPI0_CLK (MTK_PIN_NO(88) | 1) +#define PINMUX_GPIO88__FUNC_SCP_SPI0_CK (MTK_PIN_NO(88) | 2) +#define PINMUX_GPIO88__FUNC_SCL1 (MTK_PIN_NO(88) | 3) +#define PINMUX_GPIO88__FUNC_I2S1_MCK (MTK_PIN_NO(88) | 4) +#define PINMUX_GPIO88__FUNC_MFG_DFD_JTAG_TCK (MTK_PIN_NO(88) | 5) +#define PINMUX_GPIO88__FUNC_DFD_TCK_XI (MTK_PIN_NO(88) | 6) +#define PINMUX_GPIO88__FUNC_JTCK_SEL1 (MTK_PIN_NO(88) | 7) + +#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define PINMUX_GPIO89__FUNC_SRCLKENAI0 (MTK_PIN_NO(89) | 1) +#define PINMUX_GPIO89__FUNC_PWM_C (MTK_PIN_NO(89) | 2) +#define PINMUX_GPIO89__FUNC_I2S5_BCK (MTK_PIN_NO(89) | 3) +#define PINMUX_GPIO89__FUNC_ANT_SEL6 (MTK_PIN_NO(89) | 4) +#define PINMUX_GPIO89__FUNC_SDA8 (MTK_PIN_NO(89) | 5) +#define PINMUX_GPIO89__FUNC_CMVREF0 (MTK_PIN_NO(89) | 6) +#define PINMUX_GPIO89__FUNC_DBG_MON_A21 (MTK_PIN_NO(89) | 7) + +#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define PINMUX_GPIO90__FUNC_PWM_A (MTK_PIN_NO(90) | 1) +#define PINMUX_GPIO90__FUNC_CMMCLK2 (MTK_PIN_NO(90) | 2) +#define PINMUX_GPIO90__FUNC_I2S5_LRCK (MTK_PIN_NO(90) | 3) +#define PINMUX_GPIO90__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(90) | 4) +#define PINMUX_GPIO90__FUNC_SCL8 (MTK_PIN_NO(90) | 5) +#define PINMUX_GPIO90__FUNC_PTA_RXD (MTK_PIN_NO(90) | 6) +#define PINMUX_GPIO90__FUNC_DBG_MON_A22 (MTK_PIN_NO(90) | 7) + +#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define PINMUX_GPIO91__FUNC_KPROW1 (MTK_PIN_NO(91) | 1) +#define PINMUX_GPIO91__FUNC_PWM_B (MTK_PIN_NO(91) | 2) +#define PINMUX_GPIO91__FUNC_I2S5_DO (MTK_PIN_NO(91) | 3) +#define PINMUX_GPIO91__FUNC_ANT_SEL7 (MTK_PIN_NO(91) | 4) +#define PINMUX_GPIO91__FUNC_CMMCLK3 (MTK_PIN_NO(91) | 5) +#define PINMUX_GPIO91__FUNC_PTA_TXD (MTK_PIN_NO(91) | 6) + +#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define PINMUX_GPIO92__FUNC_KPROW0 (MTK_PIN_NO(92) | 1) + +#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define PINMUX_GPIO93__FUNC_KPCOL0 (MTK_PIN_NO(93) | 1) +#define PINMUX_GPIO93__FUNC_DBG_MON_B27 (MTK_PIN_NO(93) | 7) + +#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define PINMUX_GPIO94__FUNC_KPCOL1 (MTK_PIN_NO(94) | 1) +#define PINMUX_GPIO94__FUNC_I2S2_DI2 (MTK_PIN_NO(94) | 2) +#define PINMUX_GPIO94__FUNC_I2S5_MCK (MTK_PIN_NO(94) | 3) +#define PINMUX_GPIO94__FUNC_CMMCLK2 (MTK_PIN_NO(94) | 4) +#define PINMUX_GPIO94__FUNC_SCP_SPI2_MI (MTK_PIN_NO(94) | 5) +#define PINMUX_GPIO94__FUNC_SRCLKENAI1 (MTK_PIN_NO(94) | 6) +#define PINMUX_GPIO94__FUNC_SPI2_MI (MTK_PIN_NO(94) | 7) + +#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define PINMUX_GPIO95__FUNC_URXD0 (MTK_PIN_NO(95) | 1) +#define PINMUX_GPIO95__FUNC_UTXD0 (MTK_PIN_NO(95) | 2) +#define PINMUX_GPIO95__FUNC_MD_URXD0 (MTK_PIN_NO(95) | 3) +#define PINMUX_GPIO95__FUNC_MD_URXD1 (MTK_PIN_NO(95) | 4) +#define PINMUX_GPIO95__FUNC_SSPM_URXD_AO (MTK_PIN_NO(95) | 5) +#define PINMUX_GPIO95__FUNC_CCU_URXD_AO (MTK_PIN_NO(95) | 6) + +#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define PINMUX_GPIO96__FUNC_UTXD0 (MTK_PIN_NO(96) | 1) +#define PINMUX_GPIO96__FUNC_URXD0 (MTK_PIN_NO(96) | 2) +#define PINMUX_GPIO96__FUNC_MD_UTXD0 (MTK_PIN_NO(96) | 3) +#define PINMUX_GPIO96__FUNC_MD_UTXD1 (MTK_PIN_NO(96) | 4) +#define PINMUX_GPIO96__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(96) | 5) +#define PINMUX_GPIO96__FUNC_CCU_UTXD_AO (MTK_PIN_NO(96) | 6) +#define PINMUX_GPIO96__FUNC_DBG_MON_B2 (MTK_PIN_NO(96) | 7) + +#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define PINMUX_GPIO97__FUNC_UCTS0 (MTK_PIN_NO(97) | 1) +#define PINMUX_GPIO97__FUNC_I2S2_MCK (MTK_PIN_NO(97) | 2) +#define PINMUX_GPIO97__FUNC_IDDIG (MTK_PIN_NO(97) | 3) +#define PINMUX_GPIO97__FUNC_CONN_MCU_TDO (MTK_PIN_NO(97) | 4) +#define PINMUX_GPIO97__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(97) | 5) +#define PINMUX_GPIO97__FUNC_IO_JTAG_TDO (MTK_PIN_NO(97) | 6) +#define PINMUX_GPIO97__FUNC_DBG_MON_B3 (MTK_PIN_NO(97) | 7) + +#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define PINMUX_GPIO98__FUNC_URTS0 (MTK_PIN_NO(98) | 1) +#define PINMUX_GPIO98__FUNC_I2S2_BCK (MTK_PIN_NO(98) | 2) +#define PINMUX_GPIO98__FUNC_USB_DRVVBUS (MTK_PIN_NO(98) | 3) +#define PINMUX_GPIO98__FUNC_CONN_MCU_TMS (MTK_PIN_NO(98) | 4) +#define PINMUX_GPIO98__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(98) | 5) +#define PINMUX_GPIO98__FUNC_IO_JTAG_TMS (MTK_PIN_NO(98) | 6) +#define PINMUX_GPIO98__FUNC_DBG_MON_B4 (MTK_PIN_NO(98) | 7) + +#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define PINMUX_GPIO99__FUNC_CMMCLK0 (MTK_PIN_NO(99) | 1) +#define PINMUX_GPIO99__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(99) | 4) +#define PINMUX_GPIO99__FUNC_DBG_MON_B28 (MTK_PIN_NO(99) | 7) + +#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define PINMUX_GPIO100__FUNC_CMMCLK1 (MTK_PIN_NO(100) | 1) +#define PINMUX_GPIO100__FUNC_PWM_C (MTK_PIN_NO(100) | 2) +#define PINMUX_GPIO100__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(100) | 3) +#define PINMUX_GPIO100__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(100) | 4) +#define PINMUX_GPIO100__FUNC_DBG_MON_B29 (MTK_PIN_NO(100) | 7) + +#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define PINMUX_GPIO101__FUNC_CLKM2 (MTK_PIN_NO(101) | 1) +#define PINMUX_GPIO101__FUNC_I2S2_LRCK (MTK_PIN_NO(101) | 2) +#define PINMUX_GPIO101__FUNC_CMVREF1 (MTK_PIN_NO(101) | 3) +#define PINMUX_GPIO101__FUNC_CONN_MCU_TCK (MTK_PIN_NO(101) | 4) +#define PINMUX_GPIO101__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(101) | 5) +#define PINMUX_GPIO101__FUNC_IO_JTAG_TCK (MTK_PIN_NO(101) | 6) + +#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define PINMUX_GPIO102__FUNC_CLKM1 (MTK_PIN_NO(102) | 1) +#define PINMUX_GPIO102__FUNC_I2S2_DI (MTK_PIN_NO(102) | 2) +#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 3) +#define PINMUX_GPIO102__FUNC_CONN_MCU_TDI (MTK_PIN_NO(102) | 4) +#define PINMUX_GPIO102__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(102) | 5) +#define PINMUX_GPIO102__FUNC_IO_JTAG_TDI (MTK_PIN_NO(102) | 6) +#define PINMUX_GPIO102__FUNC_DBG_MON_B8 (MTK_PIN_NO(102) | 7) + +#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define PINMUX_GPIO103__FUNC_SCL2 (MTK_PIN_NO(103) | 1) + +#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define PINMUX_GPIO104__FUNC_SDA2 (MTK_PIN_NO(104) | 1) + +#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define PINMUX_GPIO105__FUNC_SCL4 (MTK_PIN_NO(105) | 1) + +#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define PINMUX_GPIO106__FUNC_SDA4 (MTK_PIN_NO(106) | 1) + +#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1) +#define PINMUX_GPIO107__FUNC_ANT_SEL0 (MTK_PIN_NO(107) | 2) +#define PINMUX_GPIO107__FUNC_CLKM0 (MTK_PIN_NO(107) | 3) +#define PINMUX_GPIO107__FUNC_SDA7 (MTK_PIN_NO(107) | 4) +#define PINMUX_GPIO107__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(107) | 5) +#define PINMUX_GPIO107__FUNC_PWM_A (MTK_PIN_NO(107) | 6) +#define PINMUX_GPIO107__FUNC_DBG_MON_B12 (MTK_PIN_NO(107) | 7) + +#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define PINMUX_GPIO108__FUNC_CMMCLK2 (MTK_PIN_NO(108) | 1) +#define PINMUX_GPIO108__FUNC_ANT_SEL1 (MTK_PIN_NO(108) | 2) +#define PINMUX_GPIO108__FUNC_CLKM1 (MTK_PIN_NO(108) | 3) +#define PINMUX_GPIO108__FUNC_SCL8 (MTK_PIN_NO(108) | 4) +#define PINMUX_GPIO108__FUNC_DAP_MD32_SWD (MTK_PIN_NO(108) | 5) +#define PINMUX_GPIO108__FUNC_PWM_B (MTK_PIN_NO(108) | 6) +#define PINMUX_GPIO108__FUNC_DBG_MON_B13 (MTK_PIN_NO(108) | 7) + +#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define PINMUX_GPIO109__FUNC_DMIC_DAT (MTK_PIN_NO(109) | 1) +#define PINMUX_GPIO109__FUNC_ANT_SEL2 (MTK_PIN_NO(109) | 2) +#define PINMUX_GPIO109__FUNC_CLKM2 (MTK_PIN_NO(109) | 3) +#define PINMUX_GPIO109__FUNC_SDA8 (MTK_PIN_NO(109) | 4) +#define PINMUX_GPIO109__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(109) | 5) +#define PINMUX_GPIO109__FUNC_PWM_C (MTK_PIN_NO(109) | 6) +#define PINMUX_GPIO109__FUNC_DBG_MON_B14 (MTK_PIN_NO(109) | 7) + +#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define PINMUX_GPIO110__FUNC_SCL7 (MTK_PIN_NO(110) | 1) +#define PINMUX_GPIO110__FUNC_ANT_SEL0 (MTK_PIN_NO(110) | 2) +#define PINMUX_GPIO110__FUNC_TP_URXD1_AO (MTK_PIN_NO(110) | 3) +#define PINMUX_GPIO110__FUNC_USB_DRVVBUS (MTK_PIN_NO(110) | 4) +#define PINMUX_GPIO110__FUNC_SRCLKENAI1 (MTK_PIN_NO(110) | 5) +#define PINMUX_GPIO110__FUNC_KPCOL2 (MTK_PIN_NO(110) | 6) +#define PINMUX_GPIO110__FUNC_URXD1 (MTK_PIN_NO(110) | 7) + +#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define PINMUX_GPIO111__FUNC_CMMCLK3 (MTK_PIN_NO(111) | 1) +#define PINMUX_GPIO111__FUNC_ANT_SEL1 (MTK_PIN_NO(111) | 2) +#define PINMUX_GPIO111__FUNC_SRCLKENAI0 (MTK_PIN_NO(111) | 3) +#define PINMUX_GPIO111__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(111) | 4) +#define PINMUX_GPIO111__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(111) | 5) +#define PINMUX_GPIO111__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(111) | 7) + +#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define PINMUX_GPIO112__FUNC_SDA7 (MTK_PIN_NO(112) | 1) +#define PINMUX_GPIO112__FUNC_ANT_SEL2 (MTK_PIN_NO(112) | 2) +#define PINMUX_GPIO112__FUNC_TP_UTXD1_AO (MTK_PIN_NO(112) | 3) +#define PINMUX_GPIO112__FUNC_IDDIG (MTK_PIN_NO(112) | 4) +#define PINMUX_GPIO112__FUNC_AGPS_SYNC (MTK_PIN_NO(112) | 5) +#define PINMUX_GPIO112__FUNC_KPROW2 (MTK_PIN_NO(112) | 6) +#define PINMUX_GPIO112__FUNC_UTXD1 (MTK_PIN_NO(112) | 7) + +#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define PINMUX_GPIO113__FUNC_CONN_TOP_CLK (MTK_PIN_NO(113) | 1) +#define PINMUX_GPIO113__FUNC_SCL6 (MTK_PIN_NO(113) | 3) +#define PINMUX_GPIO113__FUNC_AUXIF_CLK0 (MTK_PIN_NO(113) | 4) +#define PINMUX_GPIO113__FUNC_TP_UCTS1_AO (MTK_PIN_NO(113) | 6) + +#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define PINMUX_GPIO114__FUNC_CONN_TOP_DATA (MTK_PIN_NO(114) | 1) +#define PINMUX_GPIO114__FUNC_SDA6 (MTK_PIN_NO(114) | 3) +#define PINMUX_GPIO114__FUNC_AUXIF_ST0 (MTK_PIN_NO(114) | 4) +#define PINMUX_GPIO114__FUNC_TP_URTS1_AO (MTK_PIN_NO(114) | 6) + +#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define PINMUX_GPIO115__FUNC_CONN_BT_CLK (MTK_PIN_NO(115) | 1) +#define PINMUX_GPIO115__FUNC_UTXD1 (MTK_PIN_NO(115) | 2) +#define PINMUX_GPIO115__FUNC_PTA_TXD (MTK_PIN_NO(115) | 3) +#define PINMUX_GPIO115__FUNC_AUXIF_CLK1 (MTK_PIN_NO(115) | 4) +#define PINMUX_GPIO115__FUNC_DAP_MD32_SWD (MTK_PIN_NO(115) | 5) +#define PINMUX_GPIO115__FUNC_TP_UTXD1_AO (MTK_PIN_NO(115) | 6) + +#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define PINMUX_GPIO116__FUNC_CONN_BT_DATA (MTK_PIN_NO(116) | 1) +#define PINMUX_GPIO116__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(116) | 2) +#define PINMUX_GPIO116__FUNC_AUXIF_ST1 (MTK_PIN_NO(116) | 4) +#define PINMUX_GPIO116__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(116) | 5) +#define PINMUX_GPIO116__FUNC_TP_URXD2_AO (MTK_PIN_NO(116) | 6) +#define PINMUX_GPIO116__FUNC_DBG_MON_A0 (MTK_PIN_NO(116) | 7) + +#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define PINMUX_GPIO117__FUNC_CONN_WF_HB0 (MTK_PIN_NO(117) | 1) +#define PINMUX_GPIO117__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(117) | 2) +#define PINMUX_GPIO117__FUNC_TP_UTXD2_AO (MTK_PIN_NO(117) | 6) +#define PINMUX_GPIO117__FUNC_DBG_MON_A4 (MTK_PIN_NO(117) | 7) + +#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define PINMUX_GPIO118__FUNC_CONN_WF_HB1 (MTK_PIN_NO(118) | 1) +#define PINMUX_GPIO118__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(118) | 2) +#define PINMUX_GPIO118__FUNC_SSPM_URXD_AO (MTK_PIN_NO(118) | 5) +#define PINMUX_GPIO118__FUNC_TP_UCTS2_AO (MTK_PIN_NO(118) | 6) +#define PINMUX_GPIO118__FUNC_DBG_MON_A5 (MTK_PIN_NO(118) | 7) + +#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define PINMUX_GPIO119__FUNC_CONN_WF_HB2 (MTK_PIN_NO(119) | 1) +#define PINMUX_GPIO119__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(119) | 2) +#define PINMUX_GPIO119__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(119) | 5) +#define PINMUX_GPIO119__FUNC_TP_URTS2_AO (MTK_PIN_NO(119) | 6) + +#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define PINMUX_GPIO120__FUNC_CONN_WB_PTA (MTK_PIN_NO(120) | 1) +#define PINMUX_GPIO120__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(120) | 2) +#define PINMUX_GPIO120__FUNC_CCU_URXD_AO (MTK_PIN_NO(120) | 5) + +#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define PINMUX_GPIO121__FUNC_CONN_HRST_B (MTK_PIN_NO(121) | 1) +#define PINMUX_GPIO121__FUNC_URXD1 (MTK_PIN_NO(121) | 2) +#define PINMUX_GPIO121__FUNC_PTA_RXD (MTK_PIN_NO(121) | 3) +#define PINMUX_GPIO121__FUNC_CCU_UTXD_AO (MTK_PIN_NO(121) | 5) +#define PINMUX_GPIO121__FUNC_TP_URXD1_AO (MTK_PIN_NO(121) | 6) + +#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define PINMUX_GPIO122__FUNC_MSDC0_CMD (MTK_PIN_NO(122) | 1) +#define PINMUX_GPIO122__FUNC_SSPM_URXD2_AO (MTK_PIN_NO(122) | 2) +#define PINMUX_GPIO122__FUNC_ANT_SEL1 (MTK_PIN_NO(122) | 3) +#define PINMUX_GPIO122__FUNC_DBG_MON_A12 (MTK_PIN_NO(122) | 7) + +#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define PINMUX_GPIO123__FUNC_MSDC0_DAT0 (MTK_PIN_NO(123) | 1) +#define PINMUX_GPIO123__FUNC_ANT_SEL0 (MTK_PIN_NO(123) | 3) +#define PINMUX_GPIO123__FUNC_DBG_MON_A13 (MTK_PIN_NO(123) | 7) + +#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define PINMUX_GPIO124__FUNC_MSDC0_CLK (MTK_PIN_NO(124) | 1) +#define PINMUX_GPIO124__FUNC_DBG_MON_A14 (MTK_PIN_NO(124) | 7) + +#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define PINMUX_GPIO125__FUNC_MSDC0_DAT2 (MTK_PIN_NO(125) | 1) +#define PINMUX_GPIO125__FUNC_MRG_CLK (MTK_PIN_NO(125) | 3) +#define PINMUX_GPIO125__FUNC_DBG_MON_A15 (MTK_PIN_NO(125) | 7) + +#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define PINMUX_GPIO126__FUNC_MSDC0_DAT4 (MTK_PIN_NO(126) | 1) +#define PINMUX_GPIO126__FUNC_ANT_SEL5 (MTK_PIN_NO(126) | 3) +#define PINMUX_GPIO126__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(126) | 6) +#define PINMUX_GPIO126__FUNC_DBG_MON_A16 (MTK_PIN_NO(126) | 7) + +#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define PINMUX_GPIO127__FUNC_MSDC0_DAT6 (MTK_PIN_NO(127) | 1) +#define PINMUX_GPIO127__FUNC_ANT_SEL4 (MTK_PIN_NO(127) | 3) +#define PINMUX_GPIO127__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(127) | 6) +#define PINMUX_GPIO127__FUNC_DBG_MON_A17 (MTK_PIN_NO(127) | 7) + +#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define PINMUX_GPIO128__FUNC_MSDC0_DAT1 (MTK_PIN_NO(128) | 1) +#define PINMUX_GPIO128__FUNC_ANT_SEL2 (MTK_PIN_NO(128) | 3) +#define PINMUX_GPIO128__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(128) | 6) +#define PINMUX_GPIO128__FUNC_DBG_MON_A18 (MTK_PIN_NO(128) | 7) + +#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define PINMUX_GPIO129__FUNC_MSDC0_DAT5 (MTK_PIN_NO(129) | 1) +#define PINMUX_GPIO129__FUNC_ANT_SEL3 (MTK_PIN_NO(129) | 3) +#define PINMUX_GPIO129__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(129) | 6) +#define PINMUX_GPIO129__FUNC_DBG_MON_A23 (MTK_PIN_NO(129) | 7) + +#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define PINMUX_GPIO130__FUNC_MSDC0_DAT7 (MTK_PIN_NO(130) | 1) +#define PINMUX_GPIO130__FUNC_MRG_DO (MTK_PIN_NO(130) | 3) +#define PINMUX_GPIO130__FUNC_DBG_MON_A24 (MTK_PIN_NO(130) | 7) + +#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define PINMUX_GPIO131__FUNC_MSDC0_DSL (MTK_PIN_NO(131) | 1) +#define PINMUX_GPIO131__FUNC_MRG_SYNC (MTK_PIN_NO(131) | 3) +#define PINMUX_GPIO131__FUNC_DBG_MON_A25 (MTK_PIN_NO(131) | 7) + +#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define PINMUX_GPIO132__FUNC_MSDC0_DAT3 (MTK_PIN_NO(132) | 1) +#define PINMUX_GPIO132__FUNC_MRG_DI (MTK_PIN_NO(132) | 3) +#define PINMUX_GPIO132__FUNC_DBG_MON_A26 (MTK_PIN_NO(132) | 7) + +#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define PINMUX_GPIO133__FUNC_MSDC0_RSTB (MTK_PIN_NO(133) | 1) +#define PINMUX_GPIO133__FUNC_AGPS_SYNC (MTK_PIN_NO(133) | 3) +#define PINMUX_GPIO133__FUNC_DBG_MON_A27 (MTK_PIN_NO(133) | 7) + +#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define PINMUX_GPIO134__FUNC_RTC32K_CK (MTK_PIN_NO(134) | 1) + +#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define PINMUX_GPIO135__FUNC_WATCHDOG (MTK_PIN_NO(135) | 1) + +#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define PINMUX_GPIO136__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(136) | 1) +#define PINMUX_GPIO136__FUNC_AUD_CLK_MISO (MTK_PIN_NO(136) | 2) +#define PINMUX_GPIO136__FUNC_I2S1_MCK (MTK_PIN_NO(136) | 3) +#define PINMUX_GPIO136__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(136) | 6) + +#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define PINMUX_GPIO137__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(137) | 1) +#define PINMUX_GPIO137__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(137) | 2) +#define PINMUX_GPIO137__FUNC_I2S1_BCK (MTK_PIN_NO(137) | 3) + +#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(138) | 1) +#define PINMUX_GPIO138__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(138) | 2) +#define PINMUX_GPIO138__FUNC_I2S1_LRCK (MTK_PIN_NO(138) | 3) +#define PINMUX_GPIO138__FUNC_DBG_MON_B24 (MTK_PIN_NO(138) | 7) + +#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(139) | 1) +#define PINMUX_GPIO139__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(139) | 2) +#define PINMUX_GPIO139__FUNC_I2S1_DO (MTK_PIN_NO(139) | 3) +#define PINMUX_GPIO139__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(139) | 6) + +#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define PINMUX_GPIO140__FUNC_AUD_CLK_MISO (MTK_PIN_NO(140) | 1) +#define PINMUX_GPIO140__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(140) | 2) +#define PINMUX_GPIO140__FUNC_I2S0_MCK (MTK_PIN_NO(140) | 3) +#define PINMUX_GPIO140__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(140) | 6) + +#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define PINMUX_GPIO141__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(141) | 1) +#define PINMUX_GPIO141__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(141) | 2) +#define PINMUX_GPIO141__FUNC_I2S0_BCK (MTK_PIN_NO(141) | 3) + +#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define PINMUX_GPIO142__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(142) | 1) +#define PINMUX_GPIO142__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(142) | 2) +#define PINMUX_GPIO142__FUNC_I2S0_LRCK (MTK_PIN_NO(142) | 3) +#define PINMUX_GPIO142__FUNC_VOW_DAT_MISO (MTK_PIN_NO(142) | 4) +#define PINMUX_GPIO142__FUNC_DBG_MON_B25 (MTK_PIN_NO(142) | 7) + +#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define PINMUX_GPIO143__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(143) | 1) +#define PINMUX_GPIO143__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(143) | 2) +#define PINMUX_GPIO143__FUNC_I2S0_DI (MTK_PIN_NO(143) | 3) +#define PINMUX_GPIO143__FUNC_VOW_CLK_MISO (MTK_PIN_NO(143) | 4) +#define PINMUX_GPIO143__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(143) | 6) +#define PINMUX_GPIO143__FUNC_DBG_MON_B26 (MTK_PIN_NO(143) | 7) + +#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(144) | 1) +#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(144) | 2) + +#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define PINMUX_GPIO145__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(145) | 1) + +#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(146) | 1) +#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(146) | 2) + +#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define PINMUX_GPIO147__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(147) | 1) + +#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define PINMUX_GPIO148__FUNC_SRCLKENA0 (MTK_PIN_NO(148) | 1) + +#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define PINMUX_GPIO149__FUNC_SRCLKENA1 (MTK_PIN_NO(149) | 1) + +#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define PINMUX_GPIO150__FUNC_PWM_A (MTK_PIN_NO(150) | 1) +#define PINMUX_GPIO150__FUNC_CMFLASH (MTK_PIN_NO(150) | 2) +#define PINMUX_GPIO150__FUNC_CLKM0 (MTK_PIN_NO(150) | 3) +#define PINMUX_GPIO150__FUNC_DBG_MON_B30 (MTK_PIN_NO(150) | 7) + +#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define PINMUX_GPIO151__FUNC_PWM_B (MTK_PIN_NO(151) | 1) +#define PINMUX_GPIO151__FUNC_CMVREF0 (MTK_PIN_NO(151) | 2) +#define PINMUX_GPIO151__FUNC_CLKM1 (MTK_PIN_NO(151) | 3) +#define PINMUX_GPIO151__FUNC_DBG_MON_B20 (MTK_PIN_NO(151) | 7) + +#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define PINMUX_GPIO152__FUNC_PWM_C (MTK_PIN_NO(152) | 1) +#define PINMUX_GPIO152__FUNC_CMFLASH (MTK_PIN_NO(152) | 2) +#define PINMUX_GPIO152__FUNC_CLKM2 (MTK_PIN_NO(152) | 3) +#define PINMUX_GPIO152__FUNC_DBG_MON_B21 (MTK_PIN_NO(152) | 7) + +#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define PINMUX_GPIO153__FUNC_PWM_A (MTK_PIN_NO(153) | 1) +#define PINMUX_GPIO153__FUNC_CMVREF0 (MTK_PIN_NO(153) | 2) +#define PINMUX_GPIO153__FUNC_CLKM3 (MTK_PIN_NO(153) | 3) +#define PINMUX_GPIO153__FUNC_DBG_MON_B22 (MTK_PIN_NO(153) | 7) + +#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define PINMUX_GPIO154__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(154) | 1) +#define PINMUX_GPIO154__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(154) | 2) +#define PINMUX_GPIO154__FUNC_DBG_MON_B18 (MTK_PIN_NO(154) | 7) + +#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define PINMUX_GPIO155__FUNC_ANT_SEL0 (MTK_PIN_NO(155) | 1) +#define PINMUX_GPIO155__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(155) | 2) +#define PINMUX_GPIO155__FUNC_CMVREF1 (MTK_PIN_NO(155) | 3) +#define PINMUX_GPIO155__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(155) | 7) + +#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define PINMUX_GPIO156__FUNC_ANT_SEL1 (MTK_PIN_NO(156) | 1) +#define PINMUX_GPIO156__FUNC_SRCLKENAI0 (MTK_PIN_NO(156) | 2) +#define PINMUX_GPIO156__FUNC_SCL6 (MTK_PIN_NO(156) | 3) +#define PINMUX_GPIO156__FUNC_KPCOL2 (MTK_PIN_NO(156) | 4) +#define PINMUX_GPIO156__FUNC_IDDIG (MTK_PIN_NO(156) | 5) +#define PINMUX_GPIO156__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(156) | 7) + +#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define PINMUX_GPIO157__FUNC_ANT_SEL2 (MTK_PIN_NO(157) | 1) +#define PINMUX_GPIO157__FUNC_SRCLKENAI1 (MTK_PIN_NO(157) | 2) +#define PINMUX_GPIO157__FUNC_SDA6 (MTK_PIN_NO(157) | 3) +#define PINMUX_GPIO157__FUNC_KPROW2 (MTK_PIN_NO(157) | 4) +#define PINMUX_GPIO157__FUNC_USB_DRVVBUS (MTK_PIN_NO(157) | 5) +#define PINMUX_GPIO157__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(157) | 7) + +#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define PINMUX_GPIO158__FUNC_ANT_SEL3 (MTK_PIN_NO(158) | 1) + +#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define PINMUX_GPIO159__FUNC_ANT_SEL4 (MTK_PIN_NO(159) | 1) + +#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define PINMUX_GPIO160__FUNC_ANT_SEL5 (MTK_PIN_NO(160) | 1) + +#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define PINMUX_GPIO161__FUNC_SPI1_A_MI (MTK_PIN_NO(161) | 1) +#define PINMUX_GPIO161__FUNC_SCP_SPI1_MI (MTK_PIN_NO(161) | 2) +#define PINMUX_GPIO161__FUNC_IDDIG (MTK_PIN_NO(161) | 3) +#define PINMUX_GPIO161__FUNC_ANT_SEL6 (MTK_PIN_NO(161) | 4) +#define PINMUX_GPIO161__FUNC_KPCOL2 (MTK_PIN_NO(161) | 5) +#define PINMUX_GPIO161__FUNC_PTA_RXD (MTK_PIN_NO(161) | 6) +#define PINMUX_GPIO161__FUNC_DBG_MON_B19 (MTK_PIN_NO(161) | 7) + +#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define PINMUX_GPIO162__FUNC_SPI1_A_CSB (MTK_PIN_NO(162) | 1) +#define PINMUX_GPIO162__FUNC_SCP_SPI1_CS (MTK_PIN_NO(162) | 2) +#define PINMUX_GPIO162__FUNC_USB_DRVVBUS (MTK_PIN_NO(162) | 3) +#define PINMUX_GPIO162__FUNC_ANT_SEL5 (MTK_PIN_NO(162) | 4) +#define PINMUX_GPIO162__FUNC_KPROW2 (MTK_PIN_NO(162) | 5) +#define PINMUX_GPIO162__FUNC_PTA_TXD (MTK_PIN_NO(162) | 6) + +#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define PINMUX_GPIO163__FUNC_SPI1_A_MO (MTK_PIN_NO(163) | 1) +#define PINMUX_GPIO163__FUNC_SCP_SPI1_MO (MTK_PIN_NO(163) | 2) +#define PINMUX_GPIO163__FUNC_SDA1 (MTK_PIN_NO(163) | 3) +#define PINMUX_GPIO163__FUNC_ANT_SEL4 (MTK_PIN_NO(163) | 4) +#define PINMUX_GPIO163__FUNC_CMMCLK2 (MTK_PIN_NO(163) | 5) +#define PINMUX_GPIO163__FUNC_DMIC_CLK (MTK_PIN_NO(163) | 6) + +#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define PINMUX_GPIO164__FUNC_SPI1_A_CLK (MTK_PIN_NO(164) | 1) +#define PINMUX_GPIO164__FUNC_SCP_SPI1_CK (MTK_PIN_NO(164) | 2) +#define PINMUX_GPIO164__FUNC_SCL1 (MTK_PIN_NO(164) | 3) +#define PINMUX_GPIO164__FUNC_ANT_SEL3 (MTK_PIN_NO(164) | 4) +#define PINMUX_GPIO164__FUNC_CMMCLK3 (MTK_PIN_NO(164) | 5) +#define PINMUX_GPIO164__FUNC_DMIC_DAT (MTK_PIN_NO(164) | 6) + +#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) +#define PINMUX_GPIO165__FUNC_PWM_B (MTK_PIN_NO(165) | 1) +#define PINMUX_GPIO165__FUNC_CMMCLK2 (MTK_PIN_NO(165) | 2) +#define PINMUX_GPIO165__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(165) | 3) +#define PINMUX_GPIO165__FUNC_TDM_MCK_2ND (MTK_PIN_NO(165) | 6) +#define PINMUX_GPIO165__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(165) | 7) + +#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) +#define PINMUX_GPIO166__FUNC_ANT_SEL6 (MTK_PIN_NO(166) | 1) + +#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) +#define PINMUX_GPIO167__FUNC_RFIC0_BSI_EN (MTK_PIN_NO(167) | 1) +#define PINMUX_GPIO167__FUNC_SPM_BSI_EN (MTK_PIN_NO(167) | 2) + +#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) +#define PINMUX_GPIO168__FUNC_RFIC0_BSI_CK (MTK_PIN_NO(168) | 1) +#define PINMUX_GPIO168__FUNC_SPM_BSI_CK (MTK_PIN_NO(168) | 2) + +#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define PINMUX_GPIO169__FUNC_PWM_C (MTK_PIN_NO(169) | 1) +#define PINMUX_GPIO169__FUNC_CMMCLK3 (MTK_PIN_NO(169) | 2) +#define PINMUX_GPIO169__FUNC_CMVREF1 (MTK_PIN_NO(169) | 3) +#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 4) +#define PINMUX_GPIO169__FUNC_AGPS_SYNC (MTK_PIN_NO(169) | 5) +#define PINMUX_GPIO169__FUNC_TDM_BCK_2ND (MTK_PIN_NO(169) | 6) +#define PINMUX_GPIO169__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(169) | 7) + +#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define PINMUX_GPIO170__FUNC_I2S1_BCK (MTK_PIN_NO(170) | 1) +#define PINMUX_GPIO170__FUNC_I2S3_BCK (MTK_PIN_NO(170) | 2) +#define PINMUX_GPIO170__FUNC_SCL7 (MTK_PIN_NO(170) | 3) +#define PINMUX_GPIO170__FUNC_I2S5_BCK (MTK_PIN_NO(170) | 4) +#define PINMUX_GPIO170__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(170) | 5) +#define PINMUX_GPIO170__FUNC_TDM_LRCK_2ND (MTK_PIN_NO(170) | 6) +#define PINMUX_GPIO170__FUNC_ANT_SEL3 (MTK_PIN_NO(170) | 7) + +#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define PINMUX_GPIO171__FUNC_I2S1_LRCK (MTK_PIN_NO(171) | 1) +#define PINMUX_GPIO171__FUNC_I2S3_LRCK (MTK_PIN_NO(171) | 2) +#define PINMUX_GPIO171__FUNC_SDA7 (MTK_PIN_NO(171) | 3) +#define PINMUX_GPIO171__FUNC_I2S5_LRCK (MTK_PIN_NO(171) | 4) +#define PINMUX_GPIO171__FUNC_URXD1 (MTK_PIN_NO(171) | 5) +#define PINMUX_GPIO171__FUNC_TDM_DATA0_2ND (MTK_PIN_NO(171) | 6) +#define PINMUX_GPIO171__FUNC_ANT_SEL4 (MTK_PIN_NO(171) | 7) + +#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define PINMUX_GPIO172__FUNC_I2S1_DO (MTK_PIN_NO(172) | 1) +#define PINMUX_GPIO172__FUNC_I2S3_DO (MTK_PIN_NO(172) | 2) +#define PINMUX_GPIO172__FUNC_SCL8 (MTK_PIN_NO(172) | 3) +#define PINMUX_GPIO172__FUNC_I2S5_DO (MTK_PIN_NO(172) | 4) +#define PINMUX_GPIO172__FUNC_UTXD1 (MTK_PIN_NO(172) | 5) +#define PINMUX_GPIO172__FUNC_TDM_DATA1_2ND (MTK_PIN_NO(172) | 6) +#define PINMUX_GPIO172__FUNC_ANT_SEL5 (MTK_PIN_NO(172) | 7) + +#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define PINMUX_GPIO173__FUNC_I2S1_MCK (MTK_PIN_NO(173) | 1) +#define PINMUX_GPIO173__FUNC_I2S3_MCK (MTK_PIN_NO(173) | 2) +#define PINMUX_GPIO173__FUNC_SDA8 (MTK_PIN_NO(173) | 3) +#define PINMUX_GPIO173__FUNC_I2S5_MCK (MTK_PIN_NO(173) | 4) +#define PINMUX_GPIO173__FUNC_UCTS0 (MTK_PIN_NO(173) | 5) +#define PINMUX_GPIO173__FUNC_TDM_DATA2_2ND (MTK_PIN_NO(173) | 6) +#define PINMUX_GPIO173__FUNC_ANT_SEL6 (MTK_PIN_NO(173) | 7) + +#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define PINMUX_GPIO174__FUNC_I2S2_DI (MTK_PIN_NO(174) | 1) +#define PINMUX_GPIO174__FUNC_I2S0_DI (MTK_PIN_NO(174) | 2) +#define PINMUX_GPIO174__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(174) | 3) +#define PINMUX_GPIO174__FUNC_I2S2_DI2 (MTK_PIN_NO(174) | 4) +#define PINMUX_GPIO174__FUNC_URTS0 (MTK_PIN_NO(174) | 5) +#define PINMUX_GPIO174__FUNC_TDM_DATA3_2ND (MTK_PIN_NO(174) | 6) +#define PINMUX_GPIO174__FUNC_ANT_SEL7 (MTK_PIN_NO(174) | 7) + +#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define PINMUX_GPIO175__FUNC_ANT_SEL7 (MTK_PIN_NO(175) | 1) + +#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) + +#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) + +#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) + +#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) + +#endif /* __MT8183-PINFUNC_H */ -- cgit v1.2.3 From 7cf875be2fed79fcfbbe3f08beac3709c7ca9b45 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Sat, 13 Apr 2019 18:54:18 +0200 Subject: arm64: dts: allwinner: h6: Add MMC1 pins MMC1 is used on some H6 boards we want to support. Typical use is 4-bit SDIO interface with a WiFi chip. Add pin definitions for this use case. As this is the only possible configration for mmc1, make it the default one, too. Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index e0dc4a05c1ba..bd37b849d3b7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -243,6 +243,15 @@ bias-pull-up; }; + /omit-if-no-ref/ + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + mmc2_pins: mmc2-pins { pins = "PC1", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", @@ -294,6 +303,8 @@ resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 32d622f3290b2a10e3d8edd55cd21caa7384b03e Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Fri, 12 Apr 2019 14:01:32 +0200 Subject: arm64: dts: renesas: r8a77965: Remove reg-names of display node Remove the "reg-names" property from the display node of R-Car Gen3 R8A77965 device tree. No other mainline R-Car Gen3 SoC has that property specified. Fixes: 2f2c71bfc8c5 ("arm64: dts: renesas: r8a77965: Populate the DU instance placeholder") Signed-off-by: Takeshi Kihara [reworded commit message, sent upstream] Signed-off-by: Jacopo Mondi Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 4a6446305c18..2554b1742dbf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2447,7 +2447,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a77965"; reg = <0 0xfeb00000 0 0x80000>; - reg-names = "du"; interrupts = , , ; -- cgit v1.2.3 From b7f5a8e435ecc7198407f44a2a5a6cdae1056b0d Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Fri, 12 Apr 2019 13:38:32 +0200 Subject: arm64: dts: renesas: r8a77980: Add "renesas,id" to VIN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the "renesas,id" property to VIN nodes in the R-Car V3H R8A77980 device tree. Fixes: 3182aa4e0bf4 ("arm64: dts: renesas: r8a77980: add CSI2/VIN support") Signed-off-by: Jacopo Mondi Reviewed-by: Niklas Söderlund Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 4081622d548a..a901a341dcf7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -865,6 +865,7 @@ clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 811>; + renesas,id = <0>; status = "disabled"; ports { @@ -892,6 +893,7 @@ clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; status = "disabled"; + renesas,id = <1>; resets = <&cpg 810>; ports { @@ -919,6 +921,7 @@ clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 809>; + renesas,id = <2>; status = "disabled"; ports { @@ -946,6 +949,7 @@ clocks = <&cpg CPG_MOD 808>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 808>; + renesas,id = <3>; status = "disabled"; ports { @@ -973,6 +977,7 @@ clocks = <&cpg CPG_MOD 807>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 807>; + renesas,id = <4>; status = "disabled"; ports { @@ -1000,6 +1005,7 @@ clocks = <&cpg CPG_MOD 806>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 806>; + renesas,id = <5>; status = "disabled"; ports { @@ -1027,6 +1033,7 @@ clocks = <&cpg CPG_MOD 805>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 805>; + renesas,id = <6>; status = "disabled"; ports { @@ -1054,6 +1061,7 @@ clocks = <&cpg CPG_MOD 804>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 804>; + renesas,id = <7>; status = "disabled"; ports { @@ -1081,6 +1089,7 @@ clocks = <&cpg CPG_MOD 628>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 628>; + renesas,id = <8>; status = "disabled"; }; @@ -1091,6 +1100,7 @@ clocks = <&cpg CPG_MOD 627>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 627>; + renesas,id = <9>; status = "disabled"; }; @@ -1101,6 +1111,7 @@ clocks = <&cpg CPG_MOD 625>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 625>; + renesas,id = <10>; status = "disabled"; }; @@ -1111,6 +1122,7 @@ clocks = <&cpg CPG_MOD 618>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 618>; + renesas,id = <11>; status = "disabled"; }; @@ -1121,6 +1133,7 @@ clocks = <&cpg CPG_MOD 612>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 612>; + renesas,id = <12>; status = "disabled"; }; @@ -1131,6 +1144,7 @@ clocks = <&cpg CPG_MOD 608>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 608>; + renesas,id = <13>; status = "disabled"; }; @@ -1141,6 +1155,7 @@ clocks = <&cpg CPG_MOD 605>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 605>; + renesas,id = <14>; status = "disabled"; }; @@ -1151,6 +1166,7 @@ clocks = <&cpg CPG_MOD 604>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 604>; + renesas,id = <15>; status = "disabled"; }; -- cgit v1.2.3 From ddd0dc915647f12b5cbfa0a5e7d65389dcd71771 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Sat, 5 Jan 2019 12:58:58 +0530 Subject: arm64: dts: hisilicon: hi3670: Add UFS controller support Add UFS controller support for HiSilicon HI3670 SoC. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 30177543cc8f..2dcffa3ed218 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -655,6 +655,24 @@ clock-names = "apb_pclk"; }; + /* UFS */ + ufs: ufs@ff3c0000 { + compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1"; + /* 0: HCI standard */ + /* 1: UFS SYS CTRL */ + reg = <0x0 0xff3c0000 0x0 0x1000>, + <0x0 0xff3e0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; + clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; + clock-names = "ref_clk", "phy_clk"; + freq-table-hz = <0 0>, <0 0>; + /* offset: 0x84; bit: 12 */ + resets = <&crg_rst 0x84 12>; + reset-names = "rst"; + }; + /* SD */ dwmmc1: dwmmc1@ff37f000 { compatible = "hisilicon,hi3670-dw-mshc", -- cgit v1.2.3 From 820873cf38daaf965b37018028c5cc7015735745 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:03:37 +0100 Subject: arm64: dts: meson: g12a: Add SAR ADC node This patch adds the SAR ADC controller node. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index d6ca0bbd8f74..9c666e2a45b0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -5,6 +5,7 @@ #include #include +#include #include #include @@ -290,6 +291,20 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + saradc: adc@9000 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x48>; + #io-channel-cells = <1>; + interrupts = ; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; }; gic: interrupt-controller@ffc01000 { -- cgit v1.2.3 From 9baf7d6be730cbd996eb56d6047ff1d5147cbff0 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:03:38 +0100 Subject: arm64: dts: meson: g12a: Add G12A USB nodes This patch adds the nodes for the USB Complex found in the Amlogic G12A SoC. It includes the : - 2 USB2 PHYs - 1 USB3 + PCIE Combo PHY - the USB Glue with it's DWC2 and DWC3 sub-nodes Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 75 +++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 9c666e2a45b0..d4dc1a6caab5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -3,11 +3,13 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ +#include #include #include #include #include #include +#include / { compatible = "amlogic,g12a"; @@ -183,6 +185,26 @@ }; }; + usb2_phy0: phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x36000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY20>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + usb2_phy1: phy@3a000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x3a000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY21>; + reset-names = "phy"; + #phy-cells = <0>; + }; + hiu: bus@3c000 { compatible = "simple-bus"; reg = <0x0 0x3c000 0x0 0x1400>; @@ -203,6 +225,18 @@ }; }; }; + + usb3_pcie_phy: phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x0 0x46000 0x0 0x2000>; + clocks = <&clkc CLKID_PCIE_PLL>; + clock-names = "ref_clk"; + resets = <&reset RESET_PCIE_PHY>; + reset-names = "phy"; + assigned-clocks = <&clkc CLKID_PCIE_PLL>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + }; }; aobus: bus@ff800000 { @@ -366,6 +400,47 @@ status = "disabled"; }; }; + + usb: usb@ffe09000 { + status = "disabled"; + compatible = "amlogic,meson-g12a-usb-ctrl"; + reg = <0x0 0xffe09000 0x0 0xa0>; + interrupts = ; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + resets = <&reset RESET_USB>; + + dr_mode = "otg"; + + phys = <&usb2_phy0>, <&usb2_phy1>, + <&usb3_pcie_phy PHY_TYPE_USB3>; + phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = ; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "ddr"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = ; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment; + }; + }; }; timer { -- cgit v1.2.3 From 2607fd087370777fd2ae2ff7c1681fe1fb02566d Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:03:39 +0100 Subject: arm64: dts: meson: g12a: Add mali-g31 gpu node This patch adds the ARM Mali G31 GPU node. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index d4dc1a6caab5..858ddd68665c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -441,6 +441,33 @@ snps,quirk-frame-length-adjustment; }; }; + + mali: gpu@ffe40000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; + reg = <0x0 0xffe40000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = , + , + ; + interrupt-names = "gpu", "mmu", "job"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <800000000>, + <0>; /* Do Nothing */ + }; }; timer { -- cgit v1.2.3 From aa77657b018fbd0eebfc78ee3f8b07fec4f5cda7 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 18 Mar 2019 11:04:51 +0100 Subject: arm64: dts: meson-g12a-u200: add regulators Add system regulators for the S905D U200 reference design. Add some regulators. Still missing * VDD_EE (0.8V - PWM controlled) * VDD_CPU (PWM controlled) Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong Acked-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 79 +++++++++++++++++++++++++ 1 file changed, 79 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index f2afd0bf3e28..c69328d16333 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "meson-g12a.dtsi" +#include +#include / { compatible = "amlogic,u200", "amlogic,g12a"; @@ -21,6 +23,83 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + }; &uart_AO { -- cgit v1.2.3 From d1c023af198835833203f64160d3aefe1fbb45e8 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:14:50 +0100 Subject: arm64: dts: meson-g12a-sei510: Add ADC Key and BT support Add support for the : - ADC Touch key - Bluetooth Module on UART A Signed-off-by: Neil Armstrong Acked-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 43d57e20294a..ebdad5a192f1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -7,6 +7,7 @@ #include "meson-g12a.dtsi" #include +#include #include / { @@ -17,6 +18,19 @@ serial0 = &uart_AO; }; + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-onoff { + label = "On/Off"; + linux,code = ; + press-threshold-microvolt = <1700000>; + }; + }; + ao_5v: regulator-ao_5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; @@ -87,7 +101,23 @@ vin-supply = <&vddao_3v3>; regulator-always-on; }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; }; &uart_AO { -- cgit v1.2.3 From 41cc4551f45470c6052c84615af81873122cf158 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:14:51 +0100 Subject: arm64: dts: meson-g12a-sei510: Enable USB Enable the USB2 and USB3 Host ports on the SEI520 Set-Top-Box. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index ebdad5a192f1..c350a0165d44 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -125,3 +125,8 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb { + status = "okay"; + dr_mode = "host"; +}; -- cgit v1.2.3 From 8ad7624453cf1c6788b726e51727a2c7c4f7abd3 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:14:52 +0100 Subject: arm64: dts: meson-g12a-u200: Enable USB Enable the USB2 OTG and USB3 Host ports on the S905D2 Reference Design. Signed-off-by: Neil Armstrong Acked-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index c69328d16333..2240e365af27 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -108,3 +108,15 @@ pinctrl-names = "default"; }; +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc_5v>; +}; -- cgit v1.2.3 From 45b72126022923ebdcd9f9b58af1ff47f73452fa Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 11:14:53 +0100 Subject: arm64: dts: meson-g12a-x96-max: Enable USB Enable the USB2 and USB3 Host ports on the X96 Max Set-Top-Box. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 0a6919523ba9..b5b88262c06a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -107,3 +107,8 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb { + status = "okay"; + dr_mode = "host"; +}; -- cgit v1.2.3 From 5c6e116dce57453ecbeb715e7f47208bca0c157c Mon Sep 17 00:00:00 2001 From: Seiya Wang Date: Mon, 25 Feb 2019 14:51:11 +0800 Subject: arm64: dts: mt8173: correct cpu type of cpu2 and cpu3 to cortex-a72 The cpu type of cpu2 and cpu3 should be cortex-a72, not cortex-a57. Signed-off-by: Seiya Wang Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 94529b7cf84c..b6d25844f376 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -178,12 +178,12 @@ cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a57"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, + clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; @@ -191,12 +191,12 @@ cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a57"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, + clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; -- cgit v1.2.3 From a4599f6ec8e844f53dac15f719084d3b5ffe68c3 Mon Sep 17 00:00:00 2001 From: Seiya Wang Date: Wed, 9 Jan 2019 16:21:43 +0800 Subject: arm64: dts: mt8173: add pmu nodes for mt8173 This patch adds the device nodes of ARM Performance Monitor Uint for mt8173. Signed-off-by: Seiya Wang Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index b6d25844f376..15f1842f6df3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -216,6 +216,20 @@ }; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + ; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = , + ; + interrupt-affinity = <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; method = "smc"; -- cgit v1.2.3 From 083feecd854833dcee8f1e98d7197195f5fd3649 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 8 Apr 2019 11:31:35 +0200 Subject: arm64: dts: meson-g12a: Add VPU and HDMI related nodes Add VPU and HDMI display support. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 131 ++++++++++++++++++++++++++++ 1 file changed, 131 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 858ddd68665c..a696612f8f44 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -109,6 +109,37 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; + hdmi_tx: hdmi-tx@0 { + compatible = "amlogic,meson-g12a-dw-hdmi"; + reg = <0x0 0x0 0x0 0x10000>; + interrupts = ; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMITX_PHY>, + <&reset RESET_HDMITX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + clock-names = "isfr", "iahb", "venci"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; + }; + periphs: bus@34400 { compatible = "simple-bus"; reg = <0x0 0x34400 0x0 0x400>; @@ -138,6 +169,23 @@ gpio-ranges = <&periphs_pinctrl 0 0 86>; }; + hdmitx_ddc_pins: hdmitx_ddc { + mux { + groups = "hdmitx_sda", + "hdmitx_sck"; + function = "hdmitx"; + bias-disable; + }; + }; + + hdmitx_hpd_pins: hdmitx_hpd { + mux { + groups = "hdmitx_hpd_in"; + function = "hdmitx"; + bias-disable; + }; + }; + uart_a_pins: uart-a { mux { groups = "uart_a_tx", @@ -195,6 +243,19 @@ #phy-cells = <0>; }; + dmc: bus@38000 { + compatible = "simple-bus"; + reg = <0x0 0x38000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + usb2_phy1: phy@3a000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x3a000 0x0 0x2000>; @@ -262,6 +323,50 @@ clock-names = "xtal", "mpeg-clk"; }; + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-g12a-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&hhi>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ + }; + ao_pinctrl: pinctrl@14 { compatible = "amlogic,meson-g12a-aobus-pinctrl"; #address-cells = <2>; @@ -341,6 +446,32 @@ }; }; + vpu: vpu@ff900000 { + compatible = "amlogic,meson-g12a-vpu"; + reg = <0x0 0xff900000 0x0 0x100000>, + <0x0 0xff63c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + amlogic,canvas = <&canvas>; + power-domains = <&pwrc_vpu>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; reg = <0x0 0xffc01000 0 0x1000>, -- cgit v1.2.3 From 91516e5419cf91947213b4d9c62b4728701063e9 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 8 Apr 2019 11:31:36 +0200 Subject: arm64: dts: meson-g12a: Add AO-CEC nodes Amlogic G12A embeds 2 CEC controllers : - AO-CEC-A the same controller as in GXBB, GXL & GXM SoCs - AO-CEC-B is a new controller Note, the two controller can work simultanously since 2 Pads can handle CEC, thus this SoC can handle 2 distinct CEC busses. This patch adds the nodes for the AO-CEC-A and AO-CEC-B controllers. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 34 +++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index a696612f8f44..9f72396ba710 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -169,6 +169,22 @@ gpio-ranges = <&periphs_pinctrl 0 0 86>; }; + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + + cec_ao_b_h_pins: cec_ao_b_h { + mux { + groups = "cec_ao_b_h"; + function = "cec_ao_b_h"; + bias-disable; + }; + }; + hdmitx_ddc_pins: hdmitx_ddc { mux { groups = "hdmitx_sda", @@ -405,12 +421,30 @@ }; }; + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = ; + clocks = <&clkc_AO CLKID_AO_CEC>; + clock-names = "core"; + status = "disabled"; + }; + sec_AO: ao-secure@140 { compatible = "amlogic,meson-gx-ao-secure", "syscon"; reg = <0x0 0x140 0x0 0x140>; amlogic,has-chip-id; }; + cecb_AO: cec@280 { + compatible = "amlogic,meson-g12a-ao-cec"; + reg = <0x0 0x00280 0x0 0x1c>; + interrupts = ; + clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; + clock-names = "oscin"; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; -- cgit v1.2.3 From b0be96160a55701af4748bcebbe0cd5fb7aec697 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 8 Apr 2019 11:31:37 +0200 Subject: arm64: dts: meson-g12a-x96-max: Add support for Video Display This patch adds the HDMI, CVBS and CEC attributes and nodes to support full display on the X96 Max STB. AO-CEC-B is used by default and AO-CEC-A is disabled. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 54 ++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index b5b88262c06a..b3d913f28f12 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -24,6 +24,27 @@ reg = <0x0 0x0 0x0 0x40000000>; }; + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + flash_1v8: regulator-flash_1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; @@ -90,6 +111,39 @@ }; }; +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; -- cgit v1.2.3 From 912a3395df3a80fe789ebc406e595314ebefc45e Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 8 Apr 2019 11:31:38 +0200 Subject: arm64: dts: meson-g12a-sei510: Add support for Video Display This patch adds the HDMI, CVBS and CEC attributes and nodes to support full display on the SEI510 STB. AO-CEC-B is used by default and AO-CEC-A is disabled. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 53 +++++++++++++++++++++++ 1 file changed, 53 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c350a0165d44..34b40587e5ef 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -44,6 +44,16 @@ stdout-path = "serial0:115200n8"; }; + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + dc_in: regulator-dc_in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; @@ -61,6 +71,17 @@ regulator-always-on; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; @@ -103,6 +124,26 @@ }; }; +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao1v8>; @@ -120,6 +161,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; -- cgit v1.2.3 From 659f2563d323b09ca12b0e70bb6a50c1b25af3ee Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 8 Apr 2019 11:31:39 +0200 Subject: arm64: dts: meson-g12a-u200: Add support for Video Display This patch adds the HDMI, CVBS and CEC attributes and nodes to support full display on the U200 Reference Design. AO-CEC-B is used by default and AO-CEC-A is disabled. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 54 +++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 2240e365af27..0e8045b8a915 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -24,6 +24,16 @@ reg = <0x0 0x0 0x0 0x40000000>; }; + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + flash_1v8: regulator-flash_1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; @@ -33,6 +43,17 @@ regulator-always-on; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -102,6 +123,39 @@ }; +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; -- cgit v1.2.3 From 3c7ab90aaa28d5af3b1bd2347f43b77c956f3b8a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 16 Apr 2019 10:28:02 +0200 Subject: arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI Neither the OHCI or EHCI bindings are using the phy-names property, so we can just drop it. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 2 -- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 -- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 2 -- 3 files changed, 6 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index d22736a62481..e3403dde6e8a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -104,7 +104,6 @@ &ehci0 { phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -151,7 +150,6 @@ &ohci0 { phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 6f27eb082429..666f32b876c4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -553,7 +553,6 @@ resets = <&ccu RST_BUS_OHCI1>, <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -565,7 +564,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index bd37b849d3b7..9962311b574e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -456,7 +456,6 @@ resets = <&ccu RST_BUS_OHCI3>, <&ccu RST_BUS_EHCI3>; phys = <&usb2phy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -468,7 +467,6 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_OHCI3>; phys = <&usb2phy 3>; - phy-names = "usb"; status = "disabled"; }; -- cgit v1.2.3 From 8f68dcd74deb3591f94293e3b428f55b70bac087 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 21 Jan 2019 17:11:54 +0100 Subject: arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the PCIe and XUSB controllers to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 95e890d8a119..a7dc319214a4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1352,6 +1352,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&avdd_1v05_pll>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + pads { usb2 { status = "okay"; -- cgit v1.2.3 From fa941e695e105bdf3c1b55b07a53dcef3c95c02e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 21 Jan 2019 17:12:08 +0100 Subject: arm64: tegra: smaug: Move PLL power supplies to XUSB pad controller The XUSB pad controller is responsible for supplying power to the PLLs used to drive the various USB, PCI and SATA pads. Move the PLL power supplies from the PCIe and XUSB controllers to the XUSB pad controller to make sure they are available when needed. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 25fd65b5397a..72c7a04ac1df 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1654,6 +1654,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&pp1800>; + avdd-pll-uerefe-supply = <&pp1050_avdd>; + dvdd-pex-pll-supply = <&avddio_1v05>; + hvdd-pex-pll-e-supply = <&pp1800>; + pads { usb2 { status = "okay"; -- cgit v1.2.3 From 6772cd0eacc8f91a3539f99ae9d9678c455a9fc6 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 18 Jan 2019 13:27:44 +0100 Subject: arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support The Jetson Nano Developer Kit is a Tegra X1 based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4 GB of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. An M.2 Key-E slot with PCIe x1 adds additional possibilities. A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/Makefile | 1 + arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 650 +++++++++++++++++++++ 2 files changed, 651 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 6b8ab5568481..bcd018c3162b 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts new file mode 100644 index 000000000000..5d0181908f45 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -0,0 +1,650 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include +#include + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA Jetson Nano Developer Kit"; + compatible = "nvidia,p3450-0000", "nvidia,tegra210"; + + aliases { + ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0"; + rtc0 = "/i2c@7000d000/pmic@3c"; + rtc1 = "/rtc@7000e000"; + serial0 = &uarta; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0>; + }; + + pcie@1003000 { + status = "okay"; + + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + hvddio-pex-supply = <&vdd_1v8>; + dvddio-pex-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + vddio-pex-ctl-supply = <&vdd_1v8>; + + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3"; + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; + phy-names = "pcie-0"; + status = "okay"; + + ethernet@0,0 { + reg = <0x000000 0 0 0 0>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + + host1x@50000000 { + dpaux@54040000 { + status = "okay"; + }; + + sor@54580000 { + status = "okay"; + + avdd-io-supply = <&avdd_1v05>; + vdd-pll-supply = <&vdd_1v8>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) + GPIO_ACTIVE_LOW>; + nvidia,xbar-cfg = <0 1 2 3 4>; + }; + }; + + gpu@57000000 { + vdd-supply = <&vdd_gpu>; + status = "okay"; + }; + + /* debug port */ + serial@70006000 { + status = "okay"; + }; + + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + interrupts = ; + + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + drive-push-pull = <1>; + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <4>; + maxim,active-fps-power-down-slot = <3>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + }; + + gpio5_6_7 { + pins = "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-push-pull = <1>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = ; + maxim,suspend-fps-time-period-us = <5120>; + }; + + fps1 { + maxim,fps-event-source = ; + maxim,suspend-fps-time-period-us = <5120>; + }; + + fps2 { + maxim,fps-event-source = ; + }; + }; + + regulators { + in-ldo0-1-supply = <&vdd_pre>; + in-ldo2-supply = <&vdd_3v3_sys>; + in-ldo3-5-supply = <&vdd_1v8>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_pre>; + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + + vdd_soc: sd0 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1170000>; + regulator-enable-ramp-delay = <146>; + regulator-disable-ramp-delay = <4080>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <300>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <1>; + maxim,active-fps-power-down-slot = <6>; + }; + + vdd_ddr: sd1 { + regulator-name = "VDD_DDR_1V1_PMIC"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-enable-ramp-delay = <176>; + regulator-disable-ramp-delay = <145800>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <300>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <5>; + maxim,active-fps-power-down-slot = <2>; + }; + + vdd_pre: sd2 { + regulator-name = "VDD_PRE_REG_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <176>; + regulator-disable-ramp-delay = <32000>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <350>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <2>; + maxim,active-fps-power-down-slot = <5>; + }; + + vdd_1v8: sd3 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <242>; + regulator-disable-ramp-delay = <118000>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <360>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <3>; + maxim,active-fps-power-down-slot = <4>; + }; + + vdd_sys_1v2: ldo0 { + regulator-name = "AVDD_SYS_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <26>; + regulator-disable-ramp-delay = <626>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + vdd_pex_1v05: ldo1 { + regulator-name = "VDD_PEX_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <22>; + regulator-disable-ramp-delay = <650>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + vddio_sdmmc: ldo2 { + regulator-name = "VDDIO_SDMMC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <62>; + regulator-disable-ramp-delay = <650>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + ldo3 { + status = "disabled"; + }; + + vdd_rtc: ldo4 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <22>; + regulator-disable-ramp-delay = <610>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + regulator-disable-active-discharge; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <1>; + maxim,active-fps-power-down-slot = <6>; + }; + + ldo5 { + status = "disabled"; + }; + + ldo6 { + status = "disabled"; + }; + + avdd_1v05_pll: ldo7 { + regulator-name = "AVDD_1V05_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <24>; + regulator-disable-ramp-delay = <2768>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <3>; + maxim,active-fps-power-down-slot = <4>; + }; + + avdd_1v05: ldo8 { + regulator-name = "AVDD_SATA_HDMI_DP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <22>; + regulator-disable-ramp-delay = <1160>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <6>; + maxim,active-fps-power-down-slot = <1>; + }; + }; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + hda@70030000 { + nvidia,model = "jetson-nano-hda"; + + status = "okay"; + }; + + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0"; + + avdd-usb-supply = <&vdd_3v3_sys>; + dvddio-pex-supply = <&vdd_pex_1v05>; + hvddio-pex-supply = <&vdd_1v8>; + /* these really belong to the XUSB pad controller */ + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>; + hvdd-usb-ss-pll-e-supply = <&vdd_1v8>; + + status = "okay"; + }; + + padctl@7009f000 { + status = "okay"; + + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "pcie-x1"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-3 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-5 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-6 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + }; + + usb2-2 { + status = "okay"; + mode = "host"; + }; + + usb3-0 { + status = "okay"; + nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_hub_3v3>; + }; + }; + }; + + sdhci@700b0000 { + status = "okay"; + bus-width = <4>; + + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + + vqmmc-supply = <&vddio_sdmmc>; + vmmc-supply = <&vdd_3v3_sd>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <30>; + wakeup-event-action = ; + wakeup-source; + }; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <30>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + regulator-disable-ramp-delay = <11340>; + regulator-always-on; + regulator-boot-on; + + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_sd: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_hub_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + + regulator-name = "VDD_HUB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_cpu: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + + gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_gpu: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <250>; + + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + }; +}; -- cgit v1.2.3 From 8bfde5183e982691bb75eda34c23898679b31cd6 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 24 Jul 2017 17:18:44 +0200 Subject: arm64: tegra: Add XUSB and pad controller on Tegra186 Adds the XUSB pad and XUSB controllers on Tegra186. Reviewed-by: JC Kuo Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 135 +++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 6e2b6ce99df2..f0bb6ced4976 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -341,6 +341,141 @@ status = "disabled"; }; + padctl: padctl@3520000 { + compatible = "nvidia,tegra186-xusb-padctl"; + reg = <0x0 0x03520000 0x0 0x1000>, + <0x0 0x03540000 0x0 0x1000>; + reg-names = "padctl", "ao"; + + resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + status = "disabled"; + + pads { + usb2 { + clocks = <&bpmp TEGRA186_CLK_USB2_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + status = "disabled"; + + lanes { + usb3-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + }; + }; + + usb@3530000 { + compatible = "nvidia,tegra186-xusb"; + reg = <0x0 0x03530000 0x0 0x8000>, + <0x0 0x03538000 0x0 0x1000>; + reg-names = "hcd", "fpci"; + + interrupts = , + , + ; + + clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, + <&bpmp TEGRA186_CLK_XUSB_FALCON>, + <&bpmp TEGRA186_CLK_XUSB_SS>, + <&bpmp TEGRA186_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_XUSB_FS>, + <&bpmp TEGRA186_CLK_PLLU>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss", + "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + nvidia,xusb-padctl = <&padctl>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + fuse@3820000 { compatible = "nvidia,tegra186-efuse"; reg = <0x0 0x03820000 0x0 0x10000>; -- cgit v1.2.3 From 72f8ae3f8d6dbde8d37e597489f9813c597e846b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 10 Jan 2019 12:42:40 +0100 Subject: arm64: tegra: Enable XUSB on P2771 Enable the relevant pads for XUSB support on P2771-0000 and hook up the USB supply voltage regulators to the ports. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 115 +++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 19 +++- 2 files changed, 130 insertions(+), 4 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 31457f32e4d0..75ee6cf1e1b4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -58,6 +58,93 @@ status = "okay"; }; + padctl@3520000 { + status = "okay"; + + avdd-pll-erefeut-supply = <&vdd_1v8_pll>; + avdd-usb-supply = <&vdd_3v3_sys>; + dvdd-pex-supply = <&vdd_pex>; + dvdd-pex-pll-supply = <&vdd_pex>; + hvdd-pex-supply = <&vdd_1v8>; + hvdd-pex-pll-supply = <&vdd_1v8>; + vclamp-usb-supply = <&vdd_1v8>; + vddio-hsic-supply = <&gnd>; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + status = "okay"; + + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <&vdd_usb0>; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_usb1>; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + }; + }; + + usb@3530000 { + status = "okay"; + + phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>; + phy-names = "usb2-0", "usb2-1", "usb3-0"; + }; + pcie@10003000 { status = "okay"; @@ -182,5 +269,33 @@ vin-supply = <&vdd_5v0_sys>; }; + + vdd_usb0: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + + regulator-name = "VDD_USB0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + + regulator-name = "VDD_USB1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 89a2da46efae..952062f0b9a9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -291,7 +291,7 @@ regulator-boot-on; }; - ldo0 { + vdd_1v8_pll: ldo0 { regulator-name = "VDD_1V8_AP_PLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -360,10 +360,21 @@ #address-cells = <1>; #size-cells = <0>; - vdd_5v0_sys: regulator@0 { + gnd: regulator@0 { compatible = "regulator-fixed"; reg = <0>; + regulator-name = "GND"; + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_5V0_SYS"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -371,9 +382,9 @@ regulator-boot-on; }; - vdd_1v8_ap: regulator@1 { + vdd_1v8_ap: regulator@2 { compatible = "regulator-fixed"; - reg = <1>; + reg = <2>; regulator-name = "VDD_1V8_AP"; regulator-min-microvolt = <1800000>; -- cgit v1.2.3 From 2f03e39b5bfe41f3a0d9a8b01231e7e5045cb9c4 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 22 Jan 2019 15:45:05 +0100 Subject: arm64: tegra: Remove regulator hacks on Jetson TX2 Various regulators were marked as always-on for Jetson TX2. At this point, all of the regulators are properly hooked up, so this workaround is no longer required. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 952062f0b9a9..64686b033c38 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -268,43 +268,30 @@ regulator-name = "AVDD_DSI_CSI_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; vdd_1v8: sd2 { regulator-name = "VDD_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; vdd_3v3_sys: sd3 { regulator-name = "VDD_3V3_SYS"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; vdd_1v8_pll: ldo0 { regulator-name = "VDD_1V8_AP_PLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; ldo2 { regulator-name = "VDDIO_3V3_AOHV"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - /* XXX */ regulator-always-on; regulator-boot-on; }; @@ -331,18 +318,12 @@ regulator-name = "VDD_HDMI_1V05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; vdd_pex: ldo8 { regulator-name = "VDD_PEX_1V05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; }; }; @@ -390,10 +371,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; -- cgit v1.2.3 From 275b63178ff29231befa9c5b63d293ca37cdfb9e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 16 Apr 2019 10:57:46 +0200 Subject: arm64: dts: allwinner: Fix DE2 bus node name According to the device tree specification, any bus should have a 'bus' node name. Since it isn't the case for us on the DE2 bus, fix that. Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 666f32b876c4..728f70018c51 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -217,7 +217,7 @@ #size-cells = <1>; ranges; - de2@1000000 { + bus@1000000 { compatible = "allwinner,sun50i-a64-de2"; reg = <0x1000000 0x400000>; allwinner,sram = <&de2_sram 1>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 9962311b574e..16c5c3d0fd81 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -101,7 +101,7 @@ #size-cells = <1>; ranges; - display-engine@1000000 { + bus@1000000 { compatible = "allwinner,sun50i-h6-de3", "allwinner,sun50i-a64-de2"; reg = <0x1000000 0x400000>; -- cgit v1.2.3 From f7056b28b7b5b17a732f9928ef7019bcd617a331 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Thu, 18 Apr 2019 19:22:31 +0530 Subject: arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1 Some camera modules have the SoC feeding a master clock to the sensor instead of having a standalone crystal. This clock signal is generated from the clock control unit and output from the CSI MCLK function of pin PE1. Add a pinmux setting for it for camera sensors to reference. Signed-off-by: Jagan Teki Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 728f70018c51..8c5b521e6389 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -595,6 +595,12 @@ function = "csi"; }; + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + i2c0_pins: i2c0-pins { pins = "PH0", "PH1"; function = "i2c0"; -- cgit v1.2.3 From 7cc399f267813c2b25e04d7dfa0a3dbea6ece94c Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Thu, 18 Apr 2019 19:22:32 +0530 Subject: arm64: dts: allwinner: a64-amarula-relic: Add OV5640 camera node Amarula A64-Relic board by default bound with OV5640 camera, so add support for it with below pin information. - PE13, PE12 via i2c-gpio bitbanging - CLK_CSI_MCLK as external clock - PE1 as external clock pin muxing - ALDO1 as AVDD supply - DLDO3 as DOVDD supply - ELDO3 as DVDD supply - PE14 gpio for reset pin - PE15 gpio for powerdown pin Signed-off-by: Jagan Teki Signed-off-by: Maxime Ripard --- .../dts/allwinner/sun50i-a64-amarula-relic.dts | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 3575db216016..019ae09ea0fd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -22,6 +22,41 @@ stdout-path = "serial0:115200n8"; }; + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_aldo1>; + DOVDD-supply = <®_dldo3>; + DVDD-supply = <®_eldo3>; + reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */ + powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc 1>; @@ -30,6 +65,21 @@ }; }; +&csi { + status = "okay"; + + port { + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + &ehci0 { status = "okay"; }; -- cgit v1.2.3 From 136e9d920dc616f74642efaf1413f82096ddd989 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Tue, 5 Mar 2019 19:53:13 -0500 Subject: arm64: dts: qcom: pm8005: add gpio-ranges This adds the gpio-ranges property so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency between these two frameworks so GPIO hogging can be used on this board. This was not tested on this particular hardware, however this same change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pm8005.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index c0ddf128136c..3f97607d8baa 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -15,6 +15,7 @@ compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8005_gpio 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3 From 99c70e7286237ea0701523555623faf6b49ce0db Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Tue, 5 Mar 2019 19:53:14 -0500 Subject: arm64: dts: qcom: pm8998: add gpio-ranges This adds the gpio-ranges property so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency between these two frameworks so GPIO hogging can be used on this board. This was not tested on this particular hardware, however this same change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pm8998.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 43cb5ea14089..4872f116758d 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -93,6 +93,7 @@ compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8998_gpio 0 0 26>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3 From 21750eb93ea9ebe445c922f5319c6b490f45f70d Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Tue, 5 Mar 2019 19:53:15 -0500 Subject: arm64: dts: qcom: pmi8994: add gpio-ranges This adds the gpio-ranges property so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency between these two frameworks so GPIO hogging can be used on this board. This was not tested on this particular hardware, however this same change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pmi8994.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 3aee10e3f921..21e05215abe4 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -14,6 +14,7 @@ compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmi8994_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3 From d1fe337337edd37233e2fe65a43e7da6155fbec6 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Tue, 5 Mar 2019 19:53:16 -0500 Subject: arm64: dts: qcom: pmi8998: add gpio-ranges This adds the gpio-ranges property so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency between these two frameworks so GPIO hogging can be used on this board. This was not tested on this particular hardware, however this same change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 051f57e7d6ac..23f9146a161e 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -13,6 +13,7 @@ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmi8998_gpio 0 0 14>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3 From 3efd4352ba7c1b8c383321aaf9e27feade0f5e3f Mon Sep 17 00:00:00 2001 From: Khasim Syed Mohammed Date: Mon, 4 Mar 2019 21:14:24 +0100 Subject: arm64: dts: qcom: qcs404-evb: Change the compatible to distinguish platforms The compatible flag should be different for each board to match with the dtb and to let the bootloader pick the appropriate dtb. Signed-off-by: Khasim Syed Mohammed Signed-off-by: Niklas Cassel Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 3 ++- arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts index 2c14903d808e..937eb4555ffe 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts @@ -7,5 +7,6 @@ / { model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; - compatible = "qcom,qcs404-evb"; + compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", + "qcom,qcs404"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 8234cff414de..479ad3ac6c28 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -8,7 +8,8 @@ / { model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; - compatible = "qcom,qcs404-evb"; + compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb", + "qcom,qcs404"; }; ðernet { -- cgit v1.2.3 From c8be55410474360e9c791c3cbab42be4e498f363 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Fri, 5 Apr 2019 12:36:27 +0200 Subject: arm64: dts: qcom: msm8998: Fix blsp2_i2c5 address blsp1_i2c1 is at 0x0c175000 blsp2_i2c5 is at 0x0c1ba000 (the label is correct) Fixes: 1e71d0c273d0a ("arm64: dts: qcom: msm8998: Enumerate i2c controllers") Signed-off-by: Marc Gonzalez Reviewed-by: Jeffrey Hugo Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 2658100378e0..32ed67cb1f97 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1041,7 +1041,7 @@ blsp2_i2c5: i2c@c1ba000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x0c175000 0x600>; + reg = <0x0c1ba000 0x600>; interrupts = ; clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, -- cgit v1.2.3 From e97bb6d478c2943df0867f7fe72ffacc4f993301 Mon Sep 17 00:00:00 2001 From: Thomas Schreiber Date: Tue, 26 Feb 2019 08:46:11 +0200 Subject: arm64: dts: clearfog-gt-8k: add wlan_disable signal hog There is currently no DT binding for GPIO rfkill signals. To make mini-PCIe attached WiFi devices work, use gpio-hog to hold the wlan_disable signal de-asserted. Signed-off-by: Thomas Schreiber [baruch: add pinctrl node; rename tag] Signed-off-by: Baruch Siach Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 2468762283a5..9143aa13ceb1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -226,6 +226,11 @@ marvell,function = "gpio"; }; + cp0_wlan_disable_pins: wlan-disable-pins { + marvell,pins = "mpp51"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", "mpp60", "mpp61"; @@ -235,7 +240,7 @@ &cp0_pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&cp0_pci0_reset_pins>; + pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -253,6 +258,12 @@ output-low; }; + wlan_disable { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + }; + lte_disable { gpio-hog; gpios = <21 GPIO_ACTIVE_LOW>; -- cgit v1.2.3 From 4a13b3bec3b49cf979cc62005cc3af5e502899c9 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 3 Apr 2019 18:45:55 +0200 Subject: arm64: dts: imx: add Zii Ultra board support The Zii Ultra design, also known as RDU3, is the i.MX8M based successor to the the i.MX6 based RDU2. This adds the basic board support for all components which are supported by the upstream kernel at this time. The board comes in 2 different versions, called RMB3 and Zest, which are derived from the same design, but have different layouts and a few small differences in the populated components. Signed-off-by: Lucas Stach Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 2 + .../boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts | 95 +++ .../boot/dts/freescale/imx8mq-zii-ultra-zest.dts | 24 + .../arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 725 +++++++++++++++++++++ 4 files changed, 846 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 984554343c83..0bd122f60549 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -22,4 +22,6 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts new file mode 100644 index 000000000000..d2a6da479980 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx8mq-zii-ultra.dtsi" + +/ { + model = "ZII i.MX8MQ Ultra RMB3 Board"; + compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + nor_flash: flash@0 { + compatible = "st,n25q128a13", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c2 { + temp-sense@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; +}; + +&i2c4 { + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <2>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + }; + + touchscreen@2a { + compatible = "eeti,exc3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x2a>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + status = "disabled"; + }; +}; + +&usbhub { + swap-dx-lanes = <0>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts new file mode 100644 index 000000000000..1084d9330403 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx8mq-zii-ultra.dtsi" + +/ { + model = "ZII i.MX8MQ Ultra Zest Board"; + compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq"; +}; + +&i2c4 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi new file mode 100644 index 000000000000..7a1706f969f0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -0,0 +1,725 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +#include "imx8mq.dtsi" + +/ { + aliases { + mdio-gpio0 = &mdio0; + rtc0 = &ds1341; + }; + + chosen { + stdout-path = &uart1; + }; + + mdio0: bitbang-mdio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio1 14 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + }; + + pcie0_refclk: clock-pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: clock-pcie1-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_12p0_main: regulator-12p0-main { + compatible = "regulator-fixed"; + regulator-name = "12V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_5p0_main: regulator-5p0-main { + compatible = "regulator-fixed"; + vin-supply = <®_12p0_main>; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_3p3_main: regulator-3p3-main { + compatible = "regulator-fixed"; + vin-supply = <®_12p0_main>; + regulator-name = "3V3V_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0_user_usb: regulator-5p0-user-usb { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_user_usb>; + vin-supply = <®_5p0_main>; + regulator-name = "5V_USER_USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 GPIO_ACTIVE_LOW>; + startup-delay-us = <1000>; + }; + + reg_usdhc2_vmmc: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_arm: regulator-arm { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_arm>; + compatible = "regulator-gpio"; + vin-supply = <®_12p0_main>; + regulator-name = "0V9_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + states = <1000000 0x0 + 900000 0x1>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <®_arm>; +}; + +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + + phy-handle = <&phy0>; + phy-mode = "rmii"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_switch_irq>; + pinctrl-names = "default"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "gigabit_proc"; + phy-handle = <&switchphy0>; + }; + + port@1 { + reg = <1>; + label = "netaux"; + phy-handle = <&switchphy1>; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "netright"; + phy-handle = <&switchphy3>; + }; + + port@4 { + reg = <4>; + label = "netleft"; + phy-handle = <&switchphy4>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switchphy0: switchphy@0 { + reg = <0>; + interrupt-parent = <&switch>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy1: switchphy@1 { + reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy2: switchphy@2 { + reg = <2>; + interrupt-parent = <&switch>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy3: switchphy@3 { + reg = <3>; + interrupt-parent = <&switch>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy4: switchphy@4 { + reg = <4>; + interrupt-parent = <&switch>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + }; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3_hog>; + + usb-emulation { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb-emulation"; + }; + + usb-mode1 { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode1"; + }; + + usb-mode2 { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode2"; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + + ds1341: rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + usbhub: usbhub@2c { + compatible ="microchip,usb2513b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + reg = <0x2c>; + reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usb3_phy0 { + vbus-supply = <®_5p0_user_usb>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_5p0_main>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + >; + }; + + pinctrl_fec1_phy_reset: fec1phyresetgrp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x11 + >; + }; + + pinctrl_gpio3_hog: gpio3hoggrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x6 + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x6 + MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_mdio_bitbang: bitbangmdiogrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x44 + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x64 + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x66 + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x6 + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x66 + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x6 + >; + }; + + pinctrl_reg_arm: regarmgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_reg_usdhc2: regusdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_reg_user_usb: reguserusbgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6 + >; + }; + + pinctrl_switch_irq: switchgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96 + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x96 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; +}; -- cgit v1.2.3 From 45d2c84eb3a2d01af554f85b9ba67e3a3189d7b9 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 4 Apr 2019 18:52:11 +0200 Subject: arm64: dts: imx8mq: add GPU node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This enables the Vivante GC7000L GPU on the i.MX8MQ SoC. Signed-off-by: Lucas Stach Reviewed-by: Guido Günther Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 2f106be3e85e..7c0b12ad7ccf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -815,6 +815,28 @@ }; }; + gpu: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x40000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_GPU_ROOT>, + <&clk IMX8MQ_CLK_GPU_SHADER_DIV>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>; + clock-names = "core", "shader", "bus", "reg"; + assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, + <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>; + assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>; + assigned-clock-rates = <800000000>, <800000000>, + <800000000>, <800000000>; + power-domains = <&pgc_gpu>; + }; + usb_dwc3_0: usb@38100000 { compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; reg = <0x38100000 0x10000>; -- cgit v1.2.3 From 6b2bcbd8f9dbde57cc0400497944822bc8884b91 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 9 Apr 2019 05:00:01 +0000 Subject: arm64: dts: imx8qxp: enable scu general irq channel On i.MX8QXP, SCU uses MU1 general interrupt channel #3 to notify user for IRQs of RTC alarm, thermal alarm and WDOG etc., mailbox RX doorbell mode is used for this function, this patch adds support for it. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 99d59109c1a7..0683ee2a48ae 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -21,6 +21,7 @@ mmc1 = &usdhc2; mmc2 = &usdhc3; serial0 = &adma_lpuart0; + mu1 = &lsio_mu1; }; cpus { @@ -117,7 +118,8 @@ scu { compatible = "fsl,imx-scu"; mbox-names = "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3"; + "rx0", "rx1", "rx2", "rx3", + "gip3"; mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 @@ -125,7 +127,8 @@ &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 - &lsio_mu1 1 3>; + &lsio_mu1 1 3 + &lsio_mu1 3 3>; clk: clock-controller { compatible = "fsl,imx8qxp-clk"; -- cgit v1.2.3 From 7b2ac489c3972bb73951c04fe438f0af0ef93fb3 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Sun, 21 Apr 2019 15:27:46 +0800 Subject: arm64: dts: imx8qxp-mek: Add i2c1 with pca9646 Add an initial description of the i2c1 bus with a pca9646 i2c switch and various gpio expanders and sensors behind that. Only add the sensors which already have upstream drivers. According to the datasheet the pca9646 is software compatible with pca9546 so no driver changes should be required. Signed-off-by: Leonard Crestez Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 95 +++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 03aad66545c5..bfdada2db176 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -60,6 +60,82 @@ }; }; +&adma_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9646", "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + pca9557_a: gpio@1a { + compatible = "nxp,pca9557"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9557_b: gpio@1d { + compatible = "nxp,pca9557"; + reg = <0x1d>; + gpio-controller; + #gpio-cells = <2>; + }; + + light-sensor@44 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isl29023>; + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -100,6 +176,25 @@ >; }; + pinctrl_ioexp_rst: ioexp_rst_grp { + fsl,pins = < + IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 + >; + }; + + pinctrl_isl29023: isl29023grp { + fsl,pins = < + IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02 0x00000021 + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021 + IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021 + >; + }; + pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 -- cgit v1.2.3 From e85c9d0faa75049290f626c70f1374a1bd6d1b24 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 12 Apr 2019 14:10:03 +0000 Subject: arm64: dts: imx8mm: Add cpufreq properties This is very similar to imx8mq cpufreq-dt support. Operating points are from datasheet: https://www.nxp.com/docs/en/data-sheet/IMX8MMCEC.pdf Higher opps were omitted (just like imx8mq) because it requires checking speed grade from OCOTP fuses. Signed-off-by: Leonard Crestez Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index de3498c2dd44..6b407a94c06e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -48,32 +48,44 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; }; A53_L2: l2-cache0 { @@ -81,6 +93,24 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + clock-latency-ns = <150000>; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0 0x80000000>; -- cgit v1.2.3 From eda73fc8146f633c5c25fa4d25564bdc686ce3e8 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 15 Apr 2019 15:01:18 +0200 Subject: arm64: dts: fsl: imx8mq-evk: link regulator to GPU domain Link the SW1AB regulator to the GPU domain, so that it gets enabled when needed. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index ec430b3c35d4..b2038be8bbd7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -238,6 +238,10 @@ status = "okay"; }; +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; -- cgit v1.2.3 From ade5a57e304e2a880135549393970de03bde4a3a Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 15 Apr 2019 15:59:22 +0200 Subject: arm64: dts: imx8mq: fix GPU clock frequency v2 of "clk: imx: Refactor entire sccg pll clk" dropped the implicit reparenting of the PLL output from the bypass clock to the real PLL. The commit introducing the GPU node had only been tested against v1 of this patch. Without an explicit reparent to the real PLL the GPU is stuck at the bypass clock rate of 25MHz, serverly hampering performance. Signed-off-by: Lucas Stach Reviewed-by: Abel Vesa Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 7c0b12ad7ccf..6d635ba0904c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -827,13 +827,15 @@ assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, <&clk IMX8MQ_CLK_GPU_AXI>, - <&clk IMX8MQ_CLK_GPU_AHB>; + <&clk IMX8MQ_CLK_GPU_AHB>, + <&clk IMX8MQ_GPU_PLL_BYPASS>; assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>, <&clk IMX8MQ_GPU_PLL_OUT>, <&clk IMX8MQ_GPU_PLL_OUT>, - <&clk IMX8MQ_GPU_PLL_OUT>; + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL>; assigned-clock-rates = <800000000>, <800000000>, - <800000000>, <800000000>; + <800000000>, <800000000>, <0>; power-domains = <&pgc_gpu>; }; -- cgit v1.2.3 From 00c5ce8ac0233fb8975448e720bb1702b36d0725 Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Thu, 18 Apr 2019 03:42:25 +0000 Subject: arm64: dts: lx2160a: add cpu idle support lx2160a supports pw20 which could help save more power during cpu is dile. It needs system firmware support via PSCI. Signed-off-by: Ran Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index bb0dd85d809a..125a8cc2c5b3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -33,6 +33,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@1 { @@ -48,6 +49,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@100 { @@ -63,6 +65,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@101 { @@ -78,6 +81,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@200 { @@ -93,6 +97,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@201 { @@ -108,6 +113,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@300 { @@ -123,6 +129,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@301 { @@ -138,6 +145,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@400 { @@ -153,6 +161,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@401 { @@ -168,6 +177,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@500 { @@ -183,6 +193,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@501 { @@ -198,6 +209,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@600 { @@ -213,6 +225,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@601 { @@ -228,6 +241,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@700 { @@ -243,6 +257,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@701 { @@ -258,6 +273,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cluster0_l2: l2-cache0 { @@ -323,6 +339,15 @@ cache-sets = <1024>; cache-level = <2>; }; + + cpu_pw20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; gic: interrupt-controller@6000000 { -- cgit v1.2.3 From 71278b058a9f8752e51030e363b7a7306938f64e Mon Sep 17 00:00:00 2001 From: Evan Green Date: Thu, 21 Mar 2019 10:17:56 -0700 Subject: arm64: dts: sdm845: Add UFS PHY reset Wire up the reset controller in the Qcom UFS controller for the PHY. This will be used to toggle PHY reset during initialization of the PHY. Reviewed-by: Stephen Boyd Signed-off-by: Evan Green Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index d8d381f9ca73..84a57d390b6d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1035,6 +1035,7 @@ phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_PHY_GDSC>; + #reset-cells = <1>; iommus = <&apps_smmu 0x100 0xf>; @@ -1080,6 +1081,8 @@ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; status = "disabled"; ufs_mem_phy_lanes: lanes@1d87400 { -- cgit v1.2.3 From a23b5378b26cbee5dcf3b3df3b0f5f533162ccb6 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 5 Feb 2019 21:13:28 -0800 Subject: arm64: dts: qcom: sdm845: Update reserved memory map Update existing and add missing regions to the reserved memory map, as described in version 10. Reviewed-by: Sibi Sankar Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 74 ++++++++++++++++++++++++++++++++---- 1 file changed, 67 insertions(+), 7 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 84a57d390b6d..d313dfdc561b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -75,29 +75,69 @@ #size-cells = <2>; ranges; - memory@85fc0000 { + hyp_mem: memory@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: memory@85fc0000 { reg = <0 0x85fc0000 0 0x20000>; no-map; }; - memory@85fe0000 { + aop_cmd_db_mem: memory@85fe0000 { compatible = "qcom,cmd-db"; - reg = <0x0 0x85fe0000 0x0 0x20000>; + reg = <0x0 0x85fe0000 0 0x20000>; no-map; }; smem_mem: memory@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; + reg = <0x0 0x86000000 0 0x200000>; no-map; }; - memory@86200000 { + tz_mem: memory@86200000 { reg = <0 0x86200000 0 0x2d00000>; no-map; }; - wlan_msa_mem: memory@96700000 { - reg = <0 0x96700000 0 0x100000>; + qseecom_mem: memory@8ab00000 { + reg = <0 0x8ab00000 0 0x1400000>; + no-map; + }; + + camera_mem: memory@8bf00000 { + reg = <0 0x8bf00000 0 0x500000>; + no-map; + }; + + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8c410000 { + reg = <0 0x8c410000 0 0x5000>; + no-map; + }; + + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + wlan_msa_mem: memory@8df00000 { + reg = <0 0x8df00000 0 0x100000>; no-map; }; @@ -106,10 +146,30 @@ no-map; }; + venus_mem: memory@95800000 { + reg = <0 0x95800000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@95d00000 { + reg = <0 0x95d00000 0 0x800000>; + no-map; + }; + mba_region: memory@96500000 { reg = <0 0x96500000 0 0x200000>; no-map; }; + + slpi_mem: memory@96700000 { + reg = <0 0x96700000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; }; cpus { -- cgit v1.2.3 From bdecbe6b48a5440dde31274ef7ab44420175c19d Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 5 Feb 2019 21:13:29 -0800 Subject: arm64: dts: qcom: sdm845: Define rmtfs memory Define the rmtfs memory node. As the memory region specified in version 10 of the memory map is only 1MB a chunk of unallocated memory is chosen. Tested-by: Sibi Sankar Reviewed-by: Sibi Sankar Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index d313dfdc561b..b943dc343279 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -106,6 +106,15 @@ no-map; }; + rmtfs_mem: memory@88f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x88f00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + qseecom_mem: memory@8ab00000 { reg = <0 0x8ab00000 0 0x1400000>; no-map; -- cgit v1.2.3 From 6ef7c11b31a57e43062da15a36fac54fcb97b533 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 5 Feb 2019 21:13:30 -0800 Subject: arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone based remoteproc, supporting booting these cores on e.g. the MTP, and enable the same for the MTP. Tested-by: Sibi Sankar Reviewed-by: Sibi Sankar Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 8 +++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 +++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index af8c6a2445a2..02b8357c8ce8 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -48,6 +48,10 @@ }; }; +&adsp_pas { + status = "okay"; +}; + &apps_rsc { pm8998-rpmh-regulators { compatible = "qcom,pm8998-rpmh-regulators"; @@ -344,6 +348,10 @@ }; }; +&cdsp_pas { + status = "okay"; +}; + &gcc { protected-clocks = , , diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index b943dc343279..dd67f9c5cb43 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -335,6 +335,64 @@ }; }; + adsp_pas: remoteproc-adsp { + compatible = "qcom,sdm845-adsp-pas"; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + + cdsp_pas: remoteproc-cdsp { + compatible = "qcom,sdm845-cdsp-pas"; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "turing"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; -- cgit v1.2.3 From 7bfd90f5a57e49c3b97929ce1f7868629e3e13d0 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 27 Sep 2018 14:22:53 -0700 Subject: arm64: dts: qcom: pm8998: Use ADC temperature to temp-alarm node The temperature information from the temp-alarm block itself is very coarse ("temperature is above/below trip points"). Provide the driver with the die temperature channel of the ADC on the PMIC for more precise readings. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pm8998.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 4872f116758d..d3ca35a940fb 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -58,6 +58,8 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8998_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; -- cgit v1.2.3 From 79e51645a1dd7bc76c70bbb0f211868e94d8331e Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 19 Dec 2018 15:55:26 -0800 Subject: arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY Add 'xo_board' as ref clock for the DSI PHYs, it was previously hardcoded in the PLL 'driver' for the 28nm PHY. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index e4b1010f70b6..423dda996b5d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1024,8 +1024,9 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&gcc GCC_MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; }; }; -- cgit v1.2.3 From 0c0e72705a3345916192f740e5fd158efc01fefd Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 19 Dec 2018 15:55:27 -0800 Subject: arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs Add 'bi_tcxo' as ref clock for the DSI PHYs, it was previously hardcoded in the PLL 'driver' for the 10nm PHY. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index dd67f9c5cb43..0d7dd5e3d946 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1985,8 +1985,9 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; status = "disabled"; }; @@ -2051,8 +2052,9 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; status = "disabled"; }; -- cgit v1.2.3 From 7b5ee83dfdf8abe5d1c917762e4cabfe6c1b9c68 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Mon, 14 Jan 2019 10:42:55 -0800 Subject: arm64: dts: sdm845: Add CPU topology The 8 CPU cores of the SDM845 are organized in two clusters of 4 big ("gold") and 4 little ("silver") cores. Add a cpu-map node to the DT that describes this topology. Signed-off-by: Matthias Kaehlcke Reviewed-by: Douglas Anderson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 38 ++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0d7dd5e3d946..38124e923687 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -299,6 +299,44 @@ next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; }; pmu { -- cgit v1.2.3 From b6bc6423fa1a2b1cdf407c22bf1a1bfff73d57bd Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 16 Jan 2019 15:40:39 -0800 Subject: arm64: dts: sdm845: Add CPU capacity values Specify the relative CPU capacity of all SDM845 AP cores. The values were provided by Qualcomm engineers. Signed-off-by: Matthias Kaehlcke Reviewed-by: Rajendra Nayak Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 38124e923687..fcb93300ca62 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -190,6 +190,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_0>; @@ -207,6 +208,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_100>; @@ -221,6 +223,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_200>; @@ -235,6 +238,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_300>; @@ -249,6 +253,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -263,6 +268,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -277,6 +283,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -291,6 +298,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_700>; -- cgit v1.2.3 From d26c474d4cf3f73817073d87da80b0eb37f68f89 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 30 Jan 2019 11:04:32 +0000 Subject: arm64: dts: msm8996: Add graphics smmu node Add device node for graphics smmu, aka. adreno_smmu. Signed-off-by: Jordan Crouse Signed-off-by: Vivek Gautam Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index edcddc74a4fc..57a74fb1a3c3 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1288,6 +1288,25 @@ }; }; + adreno_smmu: arm,smmu@b40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xb40000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + + clocks = <&mmcc GPU_AHB_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc GPU_GDSC>; + + status = "disabled"; + }; + agnoc@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; -- cgit v1.2.3 From 953f6573700651aef1d1ea9d0bb04cb85c5d00a4 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Wed, 30 Jan 2019 11:04:33 +0000 Subject: arm64: dts: msm8996: Add display smmu node Add device node for display smmu, aka. mdp_smmu. Signed-off-by: Archit Taneja Signed-off-by: Vivek Gautam Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 57a74fb1a3c3..790dcaa54c91 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1307,6 +1307,24 @@ status = "disabled"; }; + mdp_smmu: arm,smmu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xd00000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + clocks = <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc MDSS_GDSC>; + + status = "disabled"; + }; + agnoc@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; -- cgit v1.2.3 From 3a4547c1fc2fa5a84d4036d865e9a386c7c11359 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Wed, 30 Jan 2019 11:04:34 +0000 Subject: arm64: qcom: msm8996.dtsi: Add Display nodes Signed-off-by: Archit Taneja [Removed instances of mmagic clocks; Use qcom,msm8996-smmu-v2 bindings] Signed-off-by: Vivek Gautam Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 120 ++++++++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 790dcaa54c91..cbb7fe0fbbe5 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1490,6 +1490,126 @@ "bus_slave"; }; }; + + mdss: mdss@900000 { + compatible = "qcom,mdss"; + + reg = <0x900000 0x1000>, + <0x9b0000 0x1040>, + <0x9b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface_clk"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@901000 { + compatible = "qcom,mdp5"; + reg = <0x901000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface_clk", + "bus_clk", + "core_clk", + "iommu_clk", + "vsync_clk"; + + iommus = <&mdp_smmu 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core_clk", + "iface_clk", + "core_clk", + "alt_iface_clk", + "extp_clk"; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x9a0600 0x1c4>, + <0x9a0a00 0x124>, + <0x9a0c00 0x124>, + <0x9a0e00 0x124>, + <0x9a1000 0x124>, + <0x9a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>; + clock-names = "iface_clk", + "ref_clk"; + }; + }; }; adsp-pil { -- cgit v1.2.3 From 69cc3114ab0f59a1ba429b7e5b84b26e2599d207 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 30 Jan 2019 11:04:35 +0000 Subject: arm64: dts: Add Adreno GPU definitions Add an initial node for the Adreno GPU. Signed-off-by: Vivek Gautam Signed-off-by: Srinivas Kandagatla Signed-off-by: Jordan Crouse Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 86 +++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index cbb7fe0fbbe5..d46858644c3d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -84,6 +84,12 @@ qcom,client-id = <1>; qcom,vmid = <15>; }; + + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; }; cpus { @@ -946,6 +952,11 @@ reg = <0x24f 0x1>; bits = <1 4>; }; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; }; phy@34000 { @@ -1491,6 +1502,81 @@ }; }; + gpu@b00000 { + compatible = "qcom,adreno-530.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0xb00000 0x3f000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc GPU_GX_GFX3D_CLK>, + <&mmcc GPU_AHB_CLK>, + <&mmcc GPU_GX_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + + clock-names = "core", + "iface", + "rbbmtimer", + "mem", + "mem_iface"; + + power-domains = <&mmcc GPU_GDSC>; + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + qcom,gpu-quirk-two-pass-use-wfi; + qcom,gpu-quirk-fault-detect-mask; + + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible ="operating-points-v2"; + + /* + * 624Mhz and 560Mhz are only available on speed + * bin (1 << 0). All the rest are available on + * all bins of the hardware + */ + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x01>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x01>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xFF>; + }; + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-supported-hw = <0xFF>; + }; + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-supported-hw = <0xFF>; + }; + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-supported-hw = <0xFF>; + }; + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0xFF>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + }; + }; + mdss: mdss@900000 { compatible = "qcom,mdss"; -- cgit v1.2.3 From 1ad69b69558230ed6bfdcc752bd9b69d33c932b4 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Wed, 30 Jan 2019 11:04:36 +0000 Subject: arm64: dts: apq8096-db820c: Add HDMI display support The APQ8096 DB820c platform provides HDMI output. The MDSS block on 8x96 supports a direct HDMI out. Populate the MDSS, MDP and HDMI DT nodes. Also, add the HDMI HPD and DDC pinctrl nodes with the bias and driver strength specified for this platform. Signed-off-by: Archit Taneja Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi | 52 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 27 ++++++++++++ 2 files changed, 79 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi index 6a573875d45a..1c0d06f59d00 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi @@ -62,4 +62,56 @@ bias-disable; }; }; + + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; + + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; + }; + }; + + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 6d50449fbcdf..1e78f0b47c89 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -452,6 +452,33 @@ perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; }; }; + + mdss@900000 { + status = "okay"; + + mdp@901000 { + status = "okay"; + }; + + hdmi-phy@9a0600 { + status = "okay"; + + vddio-supply = <&pm8994_l12>; + vcca-supply = <&pm8994_l28>; + #phy-cells = <0>; + }; + + hdmi-tx@9a0000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&pm8994_l12>; + core-vcc-supply = <&pm8994_s4>; + }; + }; }; -- cgit v1.2.3 From f3eb39a55a1f770ec768304af49d406dc92637d7 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 30 Jan 2019 11:04:37 +0000 Subject: arm64: dts: db820c: Add sound card support This patch adds support both digital and analog audio on DB820c. This board has HDMI port and 3.5mm audio jack to support both digital and analog audio respectively. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 8 ++ arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 94 ++++++++++++++ arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 43 +++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 141 +++++++++++++++++++++ 4 files changed, 286 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index a6ad3d7fe655..31a3e3311ad5 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -36,6 +36,14 @@ }; }; + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = ; // 1.8V + }; + }; + volume_up_gpio: pm8996_gpio2 { pinconf { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 1e78f0b47c89..943f69912074 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -18,6 +18,8 @@ #include "apq8096-db820c-pmic-pins.dtsi" #include #include +#include +#include /* * GPIO name legend: proper name = the GPIO line is used as GPIO @@ -63,6 +65,7 @@ }; clocks { + compatible = "simple-bus"; divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -72,6 +75,15 @@ pinctrl-names = "default"; pinctrl-0 = <&divclk4_pin_a>; }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; }; soc { @@ -453,6 +465,16 @@ }; }; + slim_msm: slim@91c0000 { + ngd@1 { + wcd9335: codec@1{ + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + }; + }; + }; + mdss@900000 { status = "okay"; @@ -666,3 +688,75 @@ }; }; }; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi index 131878db9852..fba2229b6236 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi @@ -13,6 +13,49 @@ &msmgpio { + wcd9xxx_intr { + wcd_intr_default: wcd_intr_default{ + mux { + pins = "gpio54"; + function = "gpio"; + }; + + config { + pins = "gpio54"; + drive-strength = <2>; /* 2 mA */ + bias-pull-down; /* pull down */ + input-enable; + }; + }; + }; + + cdc_reset_ctrl { + cdc_reset_sleep: cdc_reset_sleep { + mux { + pins = "gpio64"; + function = "gpio"; + }; + config { + pins = "gpio64"; + drive-strength = <16>; + bias-disable; + output-low; + }; + }; + cdc_reset_active:cdc_reset_active { + mux { + pins = "gpio64"; + function = "gpio"; + }; + config { + pins = "gpio64"; + drive-strength = <16>; + bias-pull-down; + output-high; + }; + }; + }; + blsp1_spi0_default: blsp1_spi0_default { pinmux { function = "blsp_spi1"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index d46858644c3d..c4e7fde9d88e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include / { interrupt-parent = <&intc>; @@ -1336,6 +1337,33 @@ status = "disabled"; }; + lpass_q6_smmu: arm,smmu-lpass_q6@1600000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x1600000 0x20000>; + #iommu-cells = <1>; + power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; + + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, + <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; + clock-names = "iface", "bus"; + status = "disabled"; + }; + agnoc@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; @@ -1502,6 +1530,66 @@ }; }; + slimbam:dma@9184000 + { + compatible = "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0x9184000 0x32000>; + num-channels = <31>; + interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + }; + + slim_msm: slim@91c0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0x91c0000 0x2C000>; + reg-names = "ctrl"; + interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&slimbam 3>, <&slimbam 4>, + <&slimbam 5>, <&slimbam 6>; + dma-names = "rx", "tx", "tx2", "rx2"; + #address-cells = <1>; + #size-cells = <0>; + ngd@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + + tasha_ifd: tas-ifd { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1{ + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + compatible = "slim217,1a0"; + reg = <1 0>; + + interrupt-parent = <&msmgpio>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + reset-gpios = <&msmgpio 64 0>; + + slim-ifc-dev = <&tasha_ifd>; + + vdd-buck-supply = <&pm8994_s4>; + vdd-buck-sido-supply = <&pm8994_s4>; + vdd-tx-supply = <&pm8994_s4>; + vdd-rx-supply = <&pm8994_s4>; + vdd-io-supply = <&pm8994_s4>; + + #sound-dai-cells = <1>; + }; + }; + }; + gpu@b00000 { compatible = "qcom,adreno-530.2", "qcom,adreno"; #stream-id-cells = <16>; @@ -1660,6 +1748,7 @@ phys = <&hdmi_phy>; phy-names = "hdmi_phy"; + #sound-dai-cells = <1>; ports { #address-cells = <1>; @@ -1698,6 +1787,9 @@ }; }; + sound: sound { + }; + adsp-pil { compatible = "qcom,msm8996-adsp-pil"; @@ -1724,6 +1816,55 @@ mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; + #address-cells = <1>; + #size-cells = <0>; + apr { + power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + reg = ; + #address-cells = <1>; + #size-cells = <0>; + + q6core { + reg = ; + compatible = "qcom,q6core"; + }; + + q6afe: q6afe { + compatible = "qcom,q6afe"; + reg = ; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + hdmi@1 { + reg = <1>; + }; + }; + }; + + q6asm: q6asm { + compatible = "qcom,q6asm"; + reg = ; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #sound-dai-cells = <1>; + iommus = <&lpass_q6_smmu 1>; + }; + }; + + q6adm: q6adm { + compatible = "qcom,q6adm"; + reg = ; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; }; -- cgit v1.2.3 From 798689e45190756c2eca6656ee4c624370a5012a Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Wed, 27 Mar 2019 21:03:17 +0900 Subject: arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64 This patch fixes IO domain voltage setting that is related to audio_gpio3d4a_ms (bit 1) of GRF_IO_VSEL. This is because RockPro64 schematics P.16 says that regulator supplies 3.0V power to APIO5_VDD. So audio_gpio3d4a_ms bit should be clear (means 3.0V). Power domain map is saying different thing (supplies 1.8V) but I believe P.16 is actual connectings. Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Cc: stable@vger.kernel.org Suggested-by: Robin Murphy Signed-off-by: Katsuhiro Suzuki Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 791fb0ee9722..20ec7d1c25d7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -508,7 +508,7 @@ status = "okay"; bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcca1v8_codec>; + audio-supply = <&vcc_3v0>; sdmmc-supply = <&vcc_sdio>; gpio1830-supply = <&vcc_3v0>; }; -- cgit v1.2.3 From 179a2802ac0f9a8e7ac7a5be83d1a39b03f27056 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 15 Apr 2019 20:34:39 +0200 Subject: arm64: dts: exynos: Move pmu and timer nodes out of soc The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like: arch/arm64/boot/dts/exynos/exynos7.dtsi:472.11-480.5: Warning (simple_bus_reg): /soc/arm-pmu: missing or empty reg/ranges property arch/arm64/boot/dts/exynos/exynos7.dtsi:482.9-492.5: Warning (simple_bus_reg): /soc/timer: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 36 ++++++++++++------------ arch/arm64/boot/dts/exynos/exynos7.dtsi | 44 +++++++++++++++--------------- 2 files changed, 40 insertions(+), 40 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 41ecbc49c61e..62cedf9855cf 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -23,6 +23,24 @@ interrupt-parent = <&gic>; + arm_a53_pmu { + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + arm_a57_pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -237,24 +255,6 @@ #size-cells = <1>; ranges; - arm_a53_pmu { - compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - arm_a57_pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; - }; - chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 967558a93d82..f83ad4c491f2 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -28,6 +28,16 @@ tmuctrl0 = &tmuctrl_0; }; + arm-pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>, + <&cpu_atlas2>, <&cpu_atlas3>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -469,28 +479,6 @@ status = "disabled"; }; - arm-pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>, - <&cpu_atlas2>, <&cpu_atlas3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - pmu_system_controller: system-controller@105c0000 { compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x105c0000 0x5000>; @@ -635,6 +623,18 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; }; #include "exynos7-pinctrl.dtsi" -- cgit v1.2.3 From f36afdd0f53583759562cef3a8453919e3b86a7c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 15 Apr 2019 20:34:40 +0200 Subject: arm64: dts: exynos: Move fixed-clocks out of soc The XXTI fixed-clock is the input to the SoC therefore it should not be inside the soc node. This also fixes DTC W=1 warning: arch/arm64/boot/dts/exynos/exynos7.dtsi:90.17-94.5: Warning (simple_bus_reg): /soc/xxti: missing or empty reg/ranges property While moving, change the name of the xxti node to match the generic type of device (following DeviceTree specification). Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 13 +++++++------ arch/arm64/boot/dts/exynos/exynos7.dtsi | 13 +++++++------ 2 files changed, 14 insertions(+), 12 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 62cedf9855cf..d29d13f4694f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -41,6 +41,13 @@ interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; + xxti: clock { + /* XXTI */ + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -260,12 +267,6 @@ reg = <0x10000000 0x100>; }; - xxti: xxti { - compatible = "fixed-clock"; - clock-output-names = "oscclk"; - #clock-cells = <0>; - }; - cmu_top: clock-controller@10030000 { compatible = "samsung,exynos5433-cmu-top"; reg = <0x10030000 0x1000>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index f83ad4c491f2..077d23478901 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -38,6 +38,13 @@ <&cpu_atlas2>, <&cpu_atlas3>; }; + fin_pll: clock { + /* XXTI */ + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -87,12 +94,6 @@ reg = <0x10000000 0x100>; }; - fin_pll: xxti { - compatible = "fixed-clock"; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; - gic: interrupt-controller@11001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- cgit v1.2.3 From ad480e0149cfc10defe76e88354b977360adb7a1 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 25 Apr 2019 01:22:50 +0530 Subject: arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones The msm8998-mtp doesn't have TSENS-based sensors wired up for skin and battery thermal zones. TSENS sensors should be common across all boards using the SoC and shouldn't be board-specific as these entries. They also show the following error when trying to read the temperature cat: read error: Invalid argument Remove these board-specific erroneous thermal zones. Fixes: 4449b6f248d9 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones") Signed-off-by: Amit Kucheria Tested-by: Marc Gonzalez Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 38 ------------------------------- 1 file changed, 38 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 6329ba4777cc..f09f3e03f708 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -15,44 +15,6 @@ stdout-path = "serial0:115200n8"; }; - thermal-zones { - battery-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 0>; - - trips { - battery_crit: trip0 { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - skin-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 5>; - - trips { - skin_alert: trip0 { - temperature = <44000>; - hysteresis = <2000>; - type = "passive"; - }; - - skip_crit: trip1 { - temperature = <70000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; -- cgit v1.2.3 From 280acabbaa11db3027dcad86feb56508efdd34fb Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 25 Apr 2019 01:52:44 +0530 Subject: arm64: dts: msm8998: thermal: Fix number of supported sensors msm8998 has 22 sensors connected in total, 14 on the 1st controller, 8 on the 2nd controller. Increase the number to allow sensors with ID 12 and 13 to be registered. Signed-off-by: Amit Kucheria Tested-by: Marc Gonzalez Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 32ed67cb1f97..d28a7f6fd413 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -745,7 +745,7 @@ reg = <0x10ab000 0x1000>, /* TM */ <0x10aa000 0x1000>; /* SROT */ - #qcom,sensors = <12>; + #qcom,sensors = <14>; #thermal-sensor-cells = <1>; }; -- cgit v1.2.3 From 060f4211f6c655e69ba24fe6d741c6e33fbfa108 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 25 Apr 2019 11:53:27 +0530 Subject: arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20 The thermal core restricts names of thermal zones to under 20 characters. Fix the names for a couple of msm8998 thermal zones. Signed-off-by: Amit Kucheria Tested-by: Marc Gonzalez Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index d28a7f6fd413..574be78a936e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -536,7 +536,7 @@ }; }; - cluster0-mhm-thermal { + clust0-mhm-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -551,7 +551,7 @@ }; }; - cluster1-mhm-thermal { + clust1-mhm-thermal { polling-delay-passive = <250>; polling-delay = <1000>; -- cgit v1.2.3 From c8e3993dd5b90d4e1c5a0edf853fa91add12b302 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Tue, 23 Apr 2019 15:12:34 +0100 Subject: dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties The old "cooling-{min,max}-state" properties for thermal bindings were ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level"), which were later removed entirely by commit e04907dbc259 ("dt-bindings: thermal: Remove "cooling-{min|max}-level" properties"). The pwm-fan binding, however, was apparently in-flight in parallel with that ratification, and so managed to introduce an example of the old properties which escaped the scope of the later cleanup and has thus continued to be dutifully copied for new boards despite being useless. Clean up these remaining undocumented anachronisms to minimise any further confusion. Acked-by: Guenter Roeck Reviewed-by: Krzysztof Kozlowski Acked-by: Thierry Reding Acked-by: Heiko Stuebner Acked-by: Shawn Guo Reviewed-by: Rob Herring Signed-off-by: Robin Murphy Signed-off-by: Olof Johansson --- Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 2 -- arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 -- arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 -- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 -- arch/arm/boot/dts/imx6qdl-emcon.dtsi | 2 -- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 -- arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 2 -- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 -- 8 files changed, 16 deletions(-) (limited to 'arch/arm64') diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 49ca5d83ed13..716e84f3bbb2 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -12,8 +12,6 @@ Optional properties: Example: fan0: pwm-fan { compatible = "pwm-fan"; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; pwms = <&pwm 0 10000 0>; cooling-levels = <0 102 170 230>; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 88891ff5f238..96d99887bceb 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -34,8 +34,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 10000 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 102 170 230>; }; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 434a7591ff63..8f9e08f940ab 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -38,8 +38,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 5f195ad7e467..93a48f2dda49 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -44,8 +44,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi index 397e205551c4..70d26616d771 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -77,8 +77,6 @@ pwm_fan: pwm-fan { compatible = "pwm-fan"; - cooling-min-state = <0>; - cooling-max-state = <4>; #cooling-cells = <2>; pwms = <&pwm4 0 50000>; cooling-levels = <0 64 127 191 255>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index b62e96945846..73801b48d1d8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -57,8 +57,6 @@ pwms = <&pwm4 0 45334>; cooling-levels = <0 64 128 255>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index 1b35d612b660..cc35c88dafd9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -56,8 +56,6 @@ fan: fan@18 { compatible = "ti,amc6821"; reg = <0x18>; - cooling-min-state = <0>; - cooling-max-state = <9>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 4f75bb6b2f14..12f24d1eea81 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -370,8 +370,6 @@ fan: fan@18 { compatible = "ti,amc6821"; reg = <0x18>; - cooling-min-state = <0>; - cooling-max-state = <9>; #cooling-cells = <2>; }; -- cgit v1.2.3 From 367e592788a2724f2558b8579ccf212cc9434158 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Tue, 26 Feb 2019 17:20:21 +0530 Subject: arm64: dts: bitmain: Add GPIO support for BM1880 SoC Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO controller IP. IP exposes 3 GPIO controllers with a total of 72 pins. Signed-off-by: Manivannan Sadhasivam Reviewed-by: Linus Walleij --- arch/arm64/boot/dts/bitmain/bm1880.dtsi | 54 +++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index 55a4769e0de2..e4da4ec6a5ee 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -80,6 +80,60 @@ #interrupt-cells = <3>; }; + gpio0: gpio@50027000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x50027000 0x0 0x400>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + }; + }; + + gpio1: gpio@50027400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x50027400 0x0 0x400>; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + }; + }; + + gpio2: gpio@50027800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x50027800 0x0 0x400>; + + portc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + }; + }; + uart0: serial@58018000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x58018000 0x0 0x2000>; -- cgit v1.2.3 From 9fe408413f501b3262e591f521bf7aff767f6eba Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Tue, 26 Feb 2019 17:20:22 +0530 Subject: arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board Add GPIO line names for Sophon Edge board based on BM1880 SoC from Bitmain. Line names are based on the board schematics as well as the 96Boards Consumer Edition specification v1.0. Signed-off-by: Manivannan Sadhasivam Reviewed-by: Linus Walleij --- arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts | 114 +++++++++++++++++++++ 1 file changed, 114 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts index 6a3255597138..6bdf4c101c61 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts +++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts @@ -8,6 +8,28 @@ #include "bm1880.dtsi" +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "sophon-edge-schematics" + * version, 1.0210. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence. This is only for the informational + * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L" + * are the only ones actually used for GPIO. + */ + / { compatible = "bitmain,sophon-edge", "bitmain,bm1880"; model = "Sophon Edge"; @@ -32,6 +54,98 @@ clock-frequency = <500000000>; #clock-cells = <0>; }; + + soc { + gpio0: gpio@50027000 { + porta: gpio-controller@0 { + gpio-line-names = + "GPIO-A", /* GPIO0, LSEC pin 23 */ + "GPIO-C", /* GPIO1, LSEC pin 25 */ + "[GPIO2_PHY0_RST]", /* GPIO2 */ + "GPIO-E", /* GPIO3, LSEC pin 27 */ + "[USB_DET]", /* GPIO4 */ + "[EN_P5V]", /* GPIO5 */ + "[VDDIO_MS1_SEL]", /* GPIO6 */ + "GPIO-G", /* GPIO7, LSEC pin 29 */ + "[BM_TUSB_RST_L]", /* GPIO8 */ + "[EN_P5V_USBHUB]", /* GPIO9 */ + "NC", + "LED_WIFI", /* GPIO11 */ + "LED_BT", /* GPIO12 */ + "[BM_BLM8221_EN_L]", /* GPIO13 */ + "NC", /* GPIO14 */ + "NC", /* GPIO15 */ + "NC", /* GPIO16 */ + "NC", /* GPIO17 */ + "NC", /* GPIO18 */ + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "NC", /* GPIO21 */ + "NC", /* GPIO22 */ + "NC", /* GPIO23 */ + "NC", /* GPIO24 */ + "NC", /* GPIO25 */ + "NC", /* GPIO26 */ + "NC", /* GPIO27 */ + "NC", /* GPIO28 */ + "NC", /* GPIO29 */ + "NC", /* GPIO30 */ + "NC"; /* GPIO31 */ + }; + }; + + gpio1: gpio@50027400 { + portb: gpio-controller@0 { + gpio-line-names = + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "[I2C0_SDA]", /* GPIO34, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO35, LSEC pin 15 */ + "[JTAG0_TDO]", /* GPIO36 */ + "[JTAG0_TCK]", /* GPIO37 */ + "[JTAG0_TDI]", /* GPIO38 */ + "[JTAG0_TMS]", /* GPIO39 */ + "[JTAG0_TRST_X]", /* GPIO40 */ + "[JTAG1_TDO]", /* GPIO41 */ + "[JTAG1_TCK]", /* GPIO42 */ + "[JTAG1_TDI]", /* GPIO43 */ + "[CPU_TX]", /* GPIO44 */ + "[CPU_RX]", /* GPIO45 */ + "[UART1_TXD]", /* GPIO46 */ + "[UART1_RXD]", /* GPIO47 */ + "[UART0_TXD]", /* GPIO48 */ + "[UART0_RXD]", /* GPIO49 */ + "GPIO-I", /* GPIO50, LSEC pin 31 */ + "GPIO-K", /* GPIO51, LSEC pin 33 */ + "USER_LED2", /* GPIO52 */ + "USER_LED1", /* GPIO53 */ + "[UART0_RTS]", /* GPIO54 */ + "[UART0_CTS]", /* GPIO55 */ + "USER_LED4", /* GPIO56, JTAG1_TRST_X */ + "USER_LED3", /* GPIO57, JTAG1_TMS */ + "[I2S0_SCLK]", /* GPIO58 */ + "[I2S0_FS]", /* GPIO59 */ + "[I2S0_SDI]", /* GPIO60 */ + "[I2S0_SDO]", /* GPIO61 */ + "GPIO-B", /* GPIO62, LSEC pin 24 */ + "GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */ + }; + }; + + gpio2: gpio@50027800 { + portc: gpio-controller@0 { + gpio-line-names = + "GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */ + "GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */ + "GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */ + "GPIO-L", /* GPIO67, LSEC pin 34 */ + "[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */ + "[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */ + "[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */ + "[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */ + }; + }; + }; }; &uart0 { -- cgit v1.2.3 From c1294fb5cb7804fb5c469c7b528a7d0fff2027c2 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Wed, 24 Apr 2019 17:32:21 +0530 Subject: arm64: dts: bitmain: Add pinctrl support for BM1880 SoC Add pinctrl support for Bitmain BM1880 SoC. This SoC only supports pinmuxing and the pinctrl registers are part of the sctrl block. Signed-off-by: Manivannan Sadhasivam Acked-by: Linus Walleij --- arch/arm64/boot/dts/bitmain/bm1880.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index e4da4ec6a5ee..7726fd4c6be6 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -80,6 +80,20 @@ #interrupt-cells = <3>; }; + sctrl: system-controller@50010000 { + compatible = "bitmain,bm1880-sctrl", "syscon", + "simple-mfd"; + reg = <0x0 0x50010000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x50010000 0x1000>; + + pinctrl: pinctrl@50 { + compatible = "bitmain,bm1880-pinctrl"; + reg = <0x50 0x4B0>; + }; + }; + gpio0: gpio@50027000 { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 470fa42933dae396860a3409abee9e6c860382a2 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Wed, 24 Apr 2019 17:32:22 +0530 Subject: arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge Add pinctrl support for UARTs exposed on the Sophon Edge board. Signed-off-by: Manivannan Sadhasivam Acked-by: Linus Walleij --- arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch/arm64') diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts index 6bdf4c101c61..3e8c70778e24 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts +++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts @@ -148,17 +148,46 @@ }; }; +&pinctrl { + pinctrl_uart0_default: pinctrl-uart0-default { + pinmux { + groups = "uart0_grp"; + function = "uart0"; + }; + }; + + pinctrl_uart1_default: pinctrl-uart1-default { + pinmux { + groups = "uart1_grp"; + function = "uart1"; + }; + }; + + pinctrl_uart2_default: pinctrl-uart2-default { + pinmux { + groups = "uart2_grp"; + function = "uart2"; + }; + }; +}; + &uart0 { status = "okay"; clocks = <&uart_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; clocks = <&uart_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; &uart2 { status = "okay"; clocks = <&uart_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_default>; }; -- cgit v1.2.3