From 9b0b26580a753d4d6bdd2b8b4ca9a8f3f2d39065 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 13 Nov 2014 12:22:01 +0000 Subject: arm64: efi: Fix stub cache maintenance While efi-entry.S mentions that efi_entry() will have relocated the kernel image, it actually means that efi_entry will have placed a copy of the kernel in the appropriate location, and until this is branched to at the end of efi_entry.S, all instructions are executed from the original image. Thus while the flush in efi_entry.S does ensure that the copy is visible to noncacheable accesses, it does not guarantee that this is true for the image instructions are being executed from. This could have disasterous effects when the MMU and caches are disabled if the image has not been naturally evicted to the PoC. Additionally, due to a missing dsb following the ic ialluis, the new kernel image is not necessarily clean in the I-cache when it is branched to, with similar potentially disasterous effects. This patch adds additional flushing to ensure that the currently executing stub text is flushed to the PoC and is thus visible to noncacheable accesses. As it is placed after the instructions cache maintenance for the new image and __flush_dcache_area already contains a dsb, we do not need to add a separate barrier to ensure completion of the icache maintenance. Comments are updated to clarify the situation with regard to the two images and the maintenance required for both. Fixes: 3c7f255039a2ad6ee1e3890505caf0d029b22e29 Signed-off-by: Mark Rutland Acked-by: Joel Schopp Reviewed-by: Roy Franz Tested-by: Tom Lendacky Cc: Ard Biesheuvel Cc: Ian Campbell Cc: Leif Lindholm Cc: Mark Salter Cc: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas --- arch/arm64/kernel/efi-entry.S | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S index 619b1dd7bcde..d18a44940968 100644 --- a/arch/arm64/kernel/efi-entry.S +++ b/arch/arm64/kernel/efi-entry.S @@ -54,18 +54,17 @@ ENTRY(efi_stub_entry) b.eq efi_load_fail /* - * efi_entry() will have relocated the kernel image if necessary - * and we return here with device tree address in x0 and the kernel - * entry point stored at *image_addr. Save those values in registers - * which are callee preserved. + * efi_entry() will have copied the kernel image if necessary and we + * return here with device tree address in x0 and the kernel entry + * point stored at *image_addr. Save those values in registers which + * are callee preserved. */ mov x20, x0 // DTB address ldr x0, [sp, #16] // relocated _text address mov x21, x0 /* - * Flush dcache covering current runtime addresses - * of kernel text/data. Then flush all of icache. + * Calculate size of the kernel Image (same for original and copy). */ adrp x1, _text add x1, x1, #:lo12:_text @@ -73,9 +72,24 @@ ENTRY(efi_stub_entry) add x2, x2, #:lo12:_edata sub x1, x2, x1 + /* + * Flush the copied Image to the PoC, and ensure it is not shadowed by + * stale icache entries from before relocation. + */ bl __flush_dcache_area ic ialluis + /* + * Ensure that the rest of this function (in the original Image) is + * visible when the caches are disabled. The I-cache can't have stale + * entries for the VA range of the current image, so no maintenance is + * necessary. + */ + adr x0, efi_stub_entry + adr x1, efi_stub_entry_end + sub x1, x1, x0 + bl __flush_dcache_area + /* Turn off Dcache and MMU */ mrs x0, CurrentEL cmp x0, #CurrentEL_EL2 @@ -105,4 +119,5 @@ efi_load_fail: ldp x29, x30, [sp], #32 ret +efi_stub_entry_end: ENDPROC(efi_stub_entry) -- cgit v1.2.3 From 287e8c6a41749e5affd6a4faa6a6102ba1594406 Mon Sep 17 00:00:00 2001 From: Min-Hua Chen Date: Wed, 8 Oct 2014 16:45:59 +0100 Subject: arm64: Fix data type for physical address Use phys_addr_t for physical address in alloc_init_pud. Although phys_addr_t and unsigned long are 64 bit in arm64, it is better to use phys_addr_t to describe physical addresses. Signed-off-by: Min-Hua Chen Signed-off-by: Catalin Marinas --- arch/arm64/mm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 0bf90d26e745..f4f8b500f74c 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -202,7 +202,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, } static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, - unsigned long end, unsigned long phys, + unsigned long end, phys_addr_t phys, int map_io) { pud_t *pud; -- cgit v1.2.3 From 97fc15436b36ee3956efad83e22a557991f7d19d Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Wed, 12 Nov 2014 21:07:44 +0000 Subject: arm64: __clear_user: handle exceptions on strb MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ARM64 currently doesn't fix up faults on the single-byte (strb) case of __clear_user... which means that we can cause a nasty kernel panic as an ordinary user with any multiple PAGE_SIZE+1 read from /dev/zero. i.e.: dd if=/dev/zero of=foo ibs=1 count=1 (or ibs=65537, etc.) This is a pretty obscure bug in the general case since we'll only __do_kernel_fault (since there's no extable entry for pc) if the mmap_sem is contended. However, with CONFIG_DEBUG_VM enabled, we'll always fault. if (!down_read_trylock(&mm->mmap_sem)) { if (!user_mode(regs) && !search_exception_tables(regs->pc)) goto no_context; retry: down_read(&mm->mmap_sem); } else { /* * The above down_read_trylock() might have succeeded in * which * case, we'll have missed the might_sleep() from * down_read(). */ might_sleep(); if (!user_mode(regs) && !search_exception_tables(regs->pc)) goto no_context; } Fix that by adding an extable entry for the strb instruction, since it touches user memory, similar to the other stores in __clear_user. Signed-off-by: Kyle McMartin Reported-by: Miloš Prchlík Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas --- arch/arm64/lib/clear_user.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S index 6e0ed93d51fe..c17967fdf5f6 100644 --- a/arch/arm64/lib/clear_user.S +++ b/arch/arm64/lib/clear_user.S @@ -46,7 +46,7 @@ USER(9f, strh wzr, [x0], #2 ) sub x1, x1, #2 4: adds x1, x1, #1 b.mi 5f - strb wzr, [x0] +USER(9f, strb wzr, [x0] ) 5: mov x0, #0 ret ENDPROC(__clear_user) -- cgit v1.2.3 From 899d5933b2dd2720f2b20b01eaa07871aa6ad096 Mon Sep 17 00:00:00 2001 From: William Cohen Date: Tue, 11 Nov 2014 09:41:27 -0500 Subject: Correct the race condition in aarch64_insn_patch_text_sync() When experimenting with patches to provide kprobes support for aarch64 smp machines would hang when inserting breakpoints into kernel code. The hangs were caused by a race condition in the code called by aarch64_insn_patch_text_sync(). The first processor in the aarch64_insn_patch_text_cb() function would patch the code while other processors were still entering the function and incrementing the cpu_count field. This resulted in some processors never observing the exit condition and exiting the function. Thus, processors in the system hung. The first processor to enter the patching function performs the patching and signals that the patching is complete with an increment of the cpu_count field. When all the processors have incremented the cpu_count field the cpu_count will be num_cpus_online()+1 and they will return to normal execution. Fixes: ae16480785de arm64: introduce interfaces to hotpatch kernel and module code Signed-off-by: William Cohen Acked-by: Will Deacon Cc: Signed-off-by: Catalin Marinas --- arch/arm64/kernel/insn.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm64') diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index e007714ded04..8cd27fedc8b6 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -163,9 +163,10 @@ static int __kprobes aarch64_insn_patch_text_cb(void *arg) * which ends with "dsb; isb" pair guaranteeing global * visibility. */ - atomic_set(&pp->cpu_count, -1); + /* Notify other processors with an additional increment. */ + atomic_inc(&pp->cpu_count); } else { - while (atomic_read(&pp->cpu_count) != -1) + while (atomic_read(&pp->cpu_count) <= num_online_cpus()) cpu_relax(); isb(); } -- cgit v1.2.3 From 5fd6690c8fb2c3012012979dd8ce7492c69c5d86 Mon Sep 17 00:00:00 2001 From: Neil Zhang Date: Tue, 28 Oct 2014 05:44:01 +0000 Subject: arm64: ARCH_PFN_OFFSET should be unsigned long pfns are unsigned long, but PHYS_PFN_OFFSET is phys_addr_t. This leads to page_to_pfn() returning phys_addr_t which cause type mismatches in some print statements. Signed-off-by: Neil Zhang Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/memory.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64') diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index ccc7087d3c4e..a62cd077457b 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -142,7 +142,7 @@ static inline void *phys_to_virt(phys_addr_t x) * virt_to_page(k) convert a _valid_ virtual address to struct page * * virt_addr_valid(k) indicates whether a virtual address is valid */ -#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET +#define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) -- cgit v1.2.3