From 8c562a1ef8a1f7c74323d5d664a40c6a4317ae4e Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 19 May 2014 15:46:56 +0800 Subject: ARM: dts: imx6sl: correct the fec ipg clock source imx6sl fec MDIO clock source is from ipg 66Mhz, but the currect imx6sl device tree define it as "enet_ref" clock (50Mhz), so the patch just corrects imx6sl dtsi fec "ipg" clock. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 2d4e5285f3f3..57d4abe03a94 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -686,7 +686,7 @@ compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; reg = <0x02188000 0x4000>; interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_ENET_REF>, + clocks = <&clks IMX6SL_CLK_ENET>, <&clks IMX6SL_CLK_ENET_REF>; clock-names = "ipg", "ahb"; status = "disabled"; -- cgit v1.2.3 From 27fe8945e42e5fa64a8bca65e8c99a4c4989b6f2 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Wed, 21 May 2014 23:04:53 -0700 Subject: ARM: dts: imx6: ventana: fix include typo Fix typo and include the right dtsi file for the gw51xx board. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-gw51xx.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts index af4929aee075..0e1406e58eff 100644 --- a/arch/arm/boot/dts/imx6q-gw51xx.dts +++ b/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -11,7 +11,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-gw54xx.dtsi" +#include "imx6qdl-gw51xx.dtsi" / { model = "Gateworks Ventana i.MX6 Quad GW51XX"; -- cgit v1.2.3 From 3c3868c52e8c002bc9c3af4529cbc79372f11b11 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 26 May 2014 10:40:31 +0200 Subject: ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix The vendor prefix for Linear Technology should be lltc, same as the NASDAQ symbol. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 31665adcbf39..0db15af41cb1 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -161,7 +161,7 @@ status = "okay"; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 367af3ec9435..c0ac27fc59e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -220,7 +220,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c91b5a6c769b..adf150c1be90 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -234,7 +234,7 @@ }; pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; + compatible = "lltc,ltc3676"; reg = <0x3c>; regulators { -- cgit v1.2.3 From 5b4c180abc9d91a63f76f0388aefcc7908199eef Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 2 Jun 2014 11:44:01 -0700 Subject: ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock source Correct the invalid clock for the sgtl5000 audio codec on the GW52xx Ventana baseboard. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index c0ac27fc59e9..744c8a2d81f6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -288,7 +288,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 169>; + clocks = <&clks 201>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; }; -- cgit v1.2.3 From eea53bb16d0ff19c1fe2d29c359100df739a95d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Jun 2014 14:40:56 +0100 Subject: ARM: dts: cubox-i: add support for PWM-driven front panel LED The front panel LED on the Cubox-i is driven by one of the iMX6 PWM channels, and is wired between the PWM output and supply. Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 25da82a03110..9202c8d18a30 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -12,6 +12,19 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; + pwmleds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_pwm1>; + + front { + active-low; + label = "imx6:red:front"; + max-brightness = <248>; + pwms = <&pwm1 0 50000>; + }; + }; + regulators { compatible = "simple-bus"; @@ -109,6 +122,10 @@ >; }; + pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led { + fsl,pins = ; + }; + pinctrl_cubox_i_spdif: cubox-i-spdif { fsl,pins = ; }; -- cgit v1.2.3 From 589681b20688267a06a068d77ef10fc7c34168ba Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Jun 2014 14:41:01 +0100 Subject: ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level The configuration of the USB OTG is a platform configuration decision, not a microsom decision. Move this configuration out to the platform level files. Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-hummingboard.dts | 10 ++++++++++ arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 10 ++++++++++ arch/arm/boot/dts/imx6qdl-microsom.dtsi | 13 ------------- 3 files changed, 20 insertions(+), 13 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5373a5f2782b..c8e51dd41b8f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -143,6 +143,14 @@ fsl,pins = ; }; + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = ; + }; + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { fsl,pins = ; }; @@ -178,6 +186,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 9202c8d18a30..e8e781656b3f 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -134,6 +134,14 @@ fsl,pins = ; }; + pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + /* + * The Cubox-i pulls this low, but as it's pointless + * leaving it as a pull-up, even if it is just 10uA. + */ + fsl,pins = ; + }; + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { fsl,pins = ; }; @@ -170,6 +178,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index d729d0b15f25..79eac6849d4c 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,14 +10,6 @@ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; - - pinctrl_microsom_usbotg: microsom-usbotg { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = ; - }; }; }; @@ -26,8 +18,3 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_usbotg>; -}; -- cgit v1.2.3 From cbb6c3fe33f94d59c1fb276af00056020bdfd874 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 13 Jun 2014 02:22:39 +0200 Subject: ARM: dts: mx5: Fix IPU port node placement The "port" node was misplaced in the original patch, therefore making the LCD dysfunctional on this board. Fix this by moving the "port" DT node into the "display {}" node. Signed-off-by: Marek Vasut Acked-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d5d146a8b149..3a04b9eba231 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -43,11 +43,11 @@ vsync-active = <1>; }; }; - }; - port { - display1_in: endpoint { - remote-endpoint = <&ipu_di1_disp1>; + port { + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; + }; }; }; }; -- cgit v1.2.3 From be149c75fc50961675a6969c72cb0dc38116a0b9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 13 Jun 2014 02:22:40 +0200 Subject: ARM: dts: mx5: Move the display out of soc {} node Move the display {} node out of the soc {} node . This just aligns the DT with other boards, there is no functional change. Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 48 ++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 25 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 3a04b9eba231..c4956b0ffb35 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -21,33 +21,31 @@ <0xb0000000 0x20000000>; }; - soc { - display1: display@di1 { - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp1>; - - display-timings { - 800x480p60 { - native-mode; - clock-frequency = <31500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <88>; - hsync-len = <128>; - vback-porch = <33>; - vfront-porch = <9>; - vsync-len = <3>; - vsync-active = <1>; - }; + display1: display@di1 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp1>; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <31500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <128>; + vback-porch = <33>; + vfront-porch = <9>; + vsync-len = <3>; + vsync-active = <1>; }; + }; - port { - display1_in: endpoint { - remote-endpoint = <&ipu_di1_disp1>; - }; + port { + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; }; }; }; -- cgit v1.2.3 From dacf49223fc680e6d5b5ca4ea43dcd197c1814c5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 23 May 2014 14:33:04 +0200 Subject: ARM: dts: imx51-babbage: Fix esdhc setup Since commit 89d7e5c13122 (mmc: sdhci-esdhc-imx: add runtime pm support), controller based card detection / write protection is not supported anymore by esdhc driver. Let's use GPIO for CD/WP on esdhc1 instead. While at it, fix cd gpio polarity for esdhc2. This is wrong and currently only works because the imx esdhc driver ignores the polarity. Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6bc3243a80d3..181d77fa2fa6 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -315,15 +315,15 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -468,8 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0x100 + MX51_PAD_GPIO1_1__GPIO1_1 0x100 >; }; -- cgit v1.2.3 From 7d278f271c082530e6841e40bb47942d526d9b4e Mon Sep 17 00:00:00 2001 From: Denis Carikli Date: Wed, 18 Jun 2014 14:56:56 +0200 Subject: ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. The following commit: 89d7e5c mmc: sdhci-esdhc-imx: add runtime pm support has the effect of also disabling the hardware card detect in runtime pm. We switch to GPIO based detection to avoid this issue. This patch is based on: ARM: dts: imx51-babbage: Fix esdhc setup Signed-off-by: Denis Carikli Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 75e66c9c6144..31cfb7f2b02e 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -107,7 +107,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>; - fsl,cd-controller; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,7 +206,7 @@ pinctrl_esdhc1_cd: esdhc1_cd { fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_0__GPIO1_0 0xd5 >; }; -- cgit v1.2.3