From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/infiniband/sysfs.txt | 66 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/infiniband/sysfs.txt (limited to 'Documentation/infiniband/sysfs.txt') diff --git a/Documentation/infiniband/sysfs.txt b/Documentation/infiniband/sysfs.txt new file mode 100644 index 000000000000..ddd519b72ee1 --- /dev/null +++ b/Documentation/infiniband/sysfs.txt @@ -0,0 +1,66 @@ +SYSFS FILES + + For each InfiniBand device, the InfiniBand drivers create the + following files under /sys/class/infiniband/: + + node_type - Node type (CA, switch or router) + node_guid - Node GUID + sys_image_guid - System image GUID + + In addition, there is a "ports" subdirectory, with one subdirectory + for each port. For example, if mthca0 is a 2-port HCA, there will + be two directories: + + /sys/class/infiniband/mthca0/ports/1 + /sys/class/infiniband/mthca0/ports/2 + + (A switch will only have a single "0" subdirectory for switch port + 0; no subdirectory is created for normal switch ports) + + In each port subdirectory, the following files are created: + + cap_mask - Port capability mask + lid - Port LID + lid_mask_count - Port LID mask count + rate - Port data rate (active width * active speed) + sm_lid - Subnet manager LID for port's subnet + sm_sl - Subnet manager SL for port's subnet + state - Port state (DOWN, INIT, ARMED, ACTIVE or ACTIVE_DEFER) + phys_state - Port physical state (Sleep, Polling, LinkUp, etc) + + There is also a "counters" subdirectory, with files + + VL15_dropped + excessive_buffer_overrun_errors + link_downed + link_error_recovery + local_link_integrity_errors + port_rcv_constraint_errors + port_rcv_data + port_rcv_errors + port_rcv_packets + port_rcv_remote_physical_errors + port_rcv_switch_relay_errors + port_xmit_constraint_errors + port_xmit_data + port_xmit_discards + port_xmit_packets + symbol_error + + Each of these files contains the corresponding value from the port's + Performance Management PortCounters attribute, as described in + section 16.1.3.5 of the InfiniBand Architecture Specification. + + The "pkeys" and "gids" subdirectories contain one file for each + entry in the port's P_Key or GID table respectively. For example, + ports/1/pkeys/10 contains the value at index 10 in port 1's P_Key + table. + +MTHCA + + The Mellanox HCA driver also creates the files: + + hw_rev - Hardware revision number + fw_ver - Firmware version + hca_type - HCA type: "MT23108", "MT25208 (MT23108 compat mode)", + or "MT25208" -- cgit v1.2.3