From 0c6700abfa3cc90e08d625a934ba0e06e147227e Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 13 Oct 2011 02:14:55 -0700 Subject: ARM: tegra: emc: device tree bindings Device tree bindings for the EMC tables on tegra. Signed-off-by: Olof Johansson Acked-by: Grant Likely --- .../devicetree/bindings/arm/tegra/emc.txt | 100 +++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/tegra/emc.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/emc.txt new file mode 100644 index 000000000000..09335f8eee00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/emc.txt @@ -0,0 +1,100 @@ +Embedded Memory Controller + +Properties: +- name : Should be emc +- #address-cells : Should be 1 +- #size-cells : Should be 0 +- compatible : Should contain "nvidia,tegra20-emc". +- reg : Offset and length of the register set for the device +- nvidia,use-ram-code : If present, the sub-nodes will be addressed + and chosen using the ramcode board selector. If omitted, only one + set of tables can be present and said tables will be used + irrespective of ram-code configuration. + +Child device nodes describe the memory settings for different configurations and clock rates. + +Example: + + emc@7000f400 { + #address-cells = < 1 >; + #size-cells = < 0 >; + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f4000 0x200>; + } + + +Embedded Memory Controller ram-code table + +If the emc node has the nvidia,use-ram-code property present, then the +next level of nodes below the emc table are used to specify which settings +apply for which ram-code settings. + +If the emc node lacks the nvidia,use-ram-code property, this level is omitted +and the tables are stored directly under the emc node (see below). + +Properties: + +- name : Should be emc-tables +- nvidia,ram-code : the binary representation of the ram-code board strappings + for which this node (and children) are valid. + + + +Embedded Memory Controller configuration table + +This is a table containing the EMC register settings for the various +operating speeds of the memory controller. They are always located as +subnodes of the emc controller node. + +There are two ways of specifying which tables to use: + +* The simplest is if there is just one set of tables in the device tree, + and they will always be used (based on which frequency is used). + This is the preferred method, especially when firmware can fill in + this information based on the specific system information and just + pass it on to the kernel. + +* The slightly more complex one is when more than one memory configuration + might exist on the system. The Tegra20 platform handles this during + early boot by selecting one out of possible 4 memory settings based + on a 2-pin "ram code" bootstrap setting on the board. The values of + these strappings can be read through a register in the SoC, and thus + used to select which tables to use. + +Properties: +- name : Should be emc-table +- compatible : Should contain "nvidia,tegra20-emc-table". +- reg : either an opaque enumerator to tell different tables apart, or + the valid frequency for which the table should be used (in kHz). +- clock-frequency : the clock frequency for the EMC at which this + table should be used (in kHz). +- nvidia,emc-registers : a 46 word array of EMC registers to be programmed + for operation at the 'clock-frequency' setting. + The order and contents of the registers are: + RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT, + WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR, + PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW, + TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE, + ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE, + ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0, + CFG_CLKTRIM_1, CFG_CLKTRIM_2 + + emc-table@166000 { + reg = <166000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 166000 >; + nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 >; + }; + + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 333000 >; + nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 >; + }; -- cgit v1.2.3 From a38b84fce9d1f3b1f054409b6363d98bf019e263 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 4 Jan 2012 08:39:34 +0000 Subject: dt: tegra gpio: Flesh out binding documentation Document the required reg and interrupts properties. Add a complete example. Signed-off-by: Stephen Warren Acked-by: Grant Likely Signed-off-by: Olof Johansson --- Documentation/devicetree/bindings/gpio/gpio_nvidia.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index eb4b530d64e1..50b363c5b884 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -2,7 +2,25 @@ NVIDIA Tegra 2 GPIO controller Required properties: - compatible : "nvidia,tegra20-gpio" +- reg : Physical base address and length of the controller's registers. +- interrupts : The interrupt outputs from the controller. - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - gpio-controller : Marks the device node as a GPIO controller. + +Example: + +gpio: gpio@6000d000 { + compatible = "nvidia,tegra20-gpio"; + reg = < 0x6000d000 0x1000 >; + interrupts = < 0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 >; + #gpio-cells = <2>; + gpio-controller; +}; -- cgit v1.2.3 From 8051b75ab32f72ebd7bf232e554d631f56f1ee42 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 11 Jan 2012 16:09:54 -0700 Subject: ARM: dt: tegra: Add Tegra APB DMA device tree binding Document binding, and add the node to tegra*.dtsi. The driver isn't actually instantiated from this node yet, but the I2S binding will rely on being able to refer to the APB DMA node using a phandle. Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- .../devicetree/bindings/dma/tegra20-apbdma.txt | 30 ++++++++++++++++++ arch/arm/boot/dts/tegra20.dtsi | 21 ++++++++++++ arch/arm/boot/dts/tegra30.dtsi | 37 ++++++++++++++++++++++ 3 files changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/tegra20-apbdma.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt new file mode 100644 index 000000000000..90fa7da525b8 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt @@ -0,0 +1,30 @@ +* NVIDIA Tegra APB DMA controller + +Required properties: +- compatible: Should be "nvidia,-apbdma" +- reg: Should contain DMA registers location and length. This shuld include + all of the per-channel registers. +- interrupts: Should contain all of the per-channel DMA interrupts. + +Examples: + +apbdma: dma@6000a000 { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = < 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04 + 0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04 + 0 148 0x04 + 0 149 0x04 + 0 150 0x04 + 0 151 0x04 >; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c1622413490a..603dc2114ac6 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -12,6 +12,27 @@ < 0x50040100 0x0100 >; }; + apbdma: dma@6000a000 { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = < 0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 >; + }; + i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2b3f6cd3c798..8a7e230832d7 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -12,6 +12,43 @@ < 0x50040100 0x0100 >; }; + apbdma: dma@6000a000 { + compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1400>; + interrupts = < 0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04 >; + }; + i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From d17adfdb17fb9f182d1fc5189d4772cd03f187c3 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 25 Jan 2012 14:43:27 -0700 Subject: ARM: dt: Add binding for Tegra PMC The Tegra PMC (Power Management Controller) interfaces with an external PMU (Power Management Unit), and controls wake-up from sleep modes. This initial binding is the bare minimum required to control the PMC's inversion of the PMU's interrupt signal. Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 19 +++++++++++++++++++ arch/arm/boot/dts/tegra-harmony.dts | 4 ++++ arch/arm/boot/dts/tegra20.dtsi | 5 +++++ arch/arm/boot/dts/tegra30.dtsi | 5 +++++ 4 files changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt new file mode 100644 index 000000000000..b5846e21cc2e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -0,0 +1,19 @@ +NVIDIA Tegra Power Management Controller (PMC) + +Properties: +- name : Should be pmc +- compatible : Should contain "nvidia,tegra-pmc". +- reg : Offset and length of the register set for the device +- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and then + fed into the ARM GIC. The PMC is not involved in the detection or + handling of this interrupt signal, merely its inversion. + +Example: + +pmc@7000f400 { + compatible = "nvidia,tegra20-pmc"; + reg = <0x7000e400 0x400>; + nvidia,invert-interrupt; +}; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 9a52615c13b8..6e8447dc0202 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -10,6 +10,10 @@ reg = < 0x00000000 0x40000000 >; }; + pmc@7000f400 { + nvidia,invert-interrupt; + }; + i2c@7000c000 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 8712449be9e1..3195ad5562d3 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,11 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + pmc@7000f400 { + compatible = "nvidia,tegra20-pmc"; + reg = <0x7000e400 0x400>; + }; + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 8a7e230832d7..fd25e8e9ffd9 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,11 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + pmc@7000f400 { + compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + reg = <0x7000e400 0x400>; + }; + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; -- cgit v1.2.3 From 6f74dc9bc8de41f3de474a7269a70921e773c40f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 4 Jan 2012 08:39:37 +0000 Subject: gpio: tegra: Dynamically allocate IRQ base, and support DT Enhance the driver to dynamically allocate the base IRQ number, and create an IRQ domain for itself. The use of an IRQ domain ensures that any device tree node interrupts properties are correctly parsed. Describe interrupt-related properties in the device tree binding docs, and the contents of "child" node interrupts property. Update tegra*.dtsi to specify the required interrupt-related properties. Finally, remove the definition of TEGRA_GPIO_TO_IRQ; this macro no longer gives correct results since the IRQ numbers for GPIOs are dynamically allocated. Signed-off-by: Stephen Warren Acked-by: Grant Likely Signed-off-by: Olof Johansson --- .../devicetree/bindings/gpio/gpio_nvidia.txt | 12 +++++++++++ arch/arm/boot/dts/tegra20.dtsi | 2 ++ arch/arm/boot/dts/tegra30.dtsi | 2 ++ arch/arm/mach-tegra/include/mach/gpio-tegra.h | 2 -- drivers/gpio/gpio-tegra.c | 25 ++++++++++++++++------ 5 files changed, 34 insertions(+), 9 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index 50b363c5b884..d114e1997d39 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -8,6 +8,16 @@ Required properties: second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 2. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. +- interrupt-controller : Marks the device node as an interrupt controller. Example: @@ -23,4 +33,6 @@ gpio: gpio@6000d000 { 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3195ad5562d3..ec1f0101c79c 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -101,6 +101,8 @@ 0 89 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; pinmux: pinmux@70000000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index fd25e8e9ffd9..ac4b75cb26c0 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -107,6 +107,8 @@ 0 125 0x04 >; #gpio-cells = <2>; gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; serial@70006000 { diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h index 87d37fdf5084..6140820555e1 100644 --- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h +++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h @@ -25,8 +25,6 @@ #define TEGRA_NR_GPIOS INT_GPIO_NR -#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio)) - struct tegra_gpio_table { int gpio; /* GPIO number */ bool enable; /* Enable for GPIO at init? */ diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index bdc293791590..bc923c7acce9 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -25,6 +25,7 @@ #include #include #include +#include #include @@ -74,7 +75,7 @@ struct tegra_gpio_bank { #endif }; - +static struct irq_domain irq_domain; static void __iomem *regs; static struct tegra_gpio_bank tegra_gpio_banks[7]; @@ -139,7 +140,7 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - return TEGRA_GPIO_TO_IRQ(offset); + return irq_domain_to_irq(&irq_domain, offset); } static struct gpio_chip tegra_gpio_chip = { @@ -155,28 +156,28 @@ static struct gpio_chip tegra_gpio_chip = { static void tegra_gpio_irq_ack(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); } static void tegra_gpio_irq_mask(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); } static void tegra_gpio_irq_unmask(struct irq_data *d) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); } static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) { - int gpio = d->irq - INT_GPIO_BASE; + int gpio = d->hwirq; struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); int port = GPIO_PORT(gpio); int lvl_type; @@ -343,6 +344,16 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) int i; int j; + irq_domain.irq_base = irq_alloc_descs(-1, 0, TEGRA_NR_GPIOS, 0); + if (irq_domain.irq_base < 0) { + dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n"); + return -ENODEV; + } + irq_domain.nr_irq = TEGRA_NR_GPIOS; + irq_domain.ops = &irq_domain_simple_ops; + irq_domain.of_node = pdev->dev.of_node; + irq_domain_add(&irq_domain); + for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { res = platform_get_resource(pdev, IORESOURCE_IRQ, i); if (!res) { @@ -381,7 +392,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) gpiochip_add(&tegra_gpio_chip); for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) { - int irq = TEGRA_GPIO_TO_IRQ(gpio); + int irq = irq_domain_to_irq(&irq_domain, gpio); /* No validity check; all Tegra GPIOs are valid IRQs */ bank = &tegra_gpio_banks[GPIO_BANK(gpio)]; -- cgit v1.2.3 From 3391811c4294da42e412ec5f83a251caf05869a4 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 19 Jan 2012 08:16:35 +0000 Subject: gpio: tegra: Parameterize the number of banks Tegra20's GPIO controller has 7 banks, and Tegra30's controller has 8 banks. Allow the number of banks to be configured at run-time by the device tree. Signed-off-by: Stephen Warren Acked-by: Grant Likely Signed-off-by: Olof Johansson --- .../devicetree/bindings/gpio/gpio_nvidia.txt | 8 +++-- drivers/gpio/gpio-tegra.c | 42 +++++++++++++++++----- 2 files changed, 38 insertions(+), 12 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index d114e1997d39..023c9526e5f8 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -1,9 +1,11 @@ -NVIDIA Tegra 2 GPIO controller +NVIDIA Tegra GPIO controller Required properties: -- compatible : "nvidia,tegra20-gpio" +- compatible : "nvidia,tegra-gpio" - reg : Physical base address and length of the controller's registers. -- interrupts : The interrupt outputs from the controller. +- interrupts : The interrupt outputs from the controller. For Tegra20, + there should be 7 interrupts specified, and for Tegra30, there should + be 8 interrupts specified. - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index bc923c7acce9..98f3980dab7c 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -77,7 +77,8 @@ struct tegra_gpio_bank { static struct irq_domain irq_domain; static void __iomem *regs; -static struct tegra_gpio_bank tegra_gpio_banks[7]; +static u32 tegra_gpio_bank_count; +static struct tegra_gpio_bank *tegra_gpio_banks; static inline void tegra_gpio_writel(u32 val, u32 reg) { @@ -274,7 +275,7 @@ void tegra_gpio_resume(void) local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + for (b = 0; b < tegra_gpio_bank_count; b++) { struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { @@ -297,7 +298,7 @@ void tegra_gpio_suspend(void) int p; local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + for (b = 0; b < tegra_gpio_bank_count; b++) { struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { @@ -338,23 +339,46 @@ static struct lock_class_key gpio_lock_class; static int __devinit tegra_gpio_probe(struct platform_device *pdev) { + int irq_base; struct resource *res; struct tegra_gpio_bank *bank; int gpio; int i; int j; - irq_domain.irq_base = irq_alloc_descs(-1, 0, TEGRA_NR_GPIOS, 0); - if (irq_domain.irq_base < 0) { + for (;;) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count); + if (!res) + break; + tegra_gpio_bank_count++; + } + if (!tegra_gpio_bank_count) { + dev_err(&pdev->dev, "Missing IRQ resource\n"); + return -ENODEV; + } + + tegra_gpio_chip.ngpio = tegra_gpio_bank_count * 32; + + tegra_gpio_banks = devm_kzalloc(&pdev->dev, + tegra_gpio_bank_count * sizeof(*tegra_gpio_banks), + GFP_KERNEL); + if (!tegra_gpio_banks) { + dev_err(&pdev->dev, "Couldn't allocate bank structure\n"); + return -ENODEV; + } + + irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0); + if (irq_base < 0) { dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n"); return -ENODEV; } - irq_domain.nr_irq = TEGRA_NR_GPIOS; + irq_domain.irq_base = irq_base; + irq_domain.nr_irq = tegra_gpio_chip.ngpio; irq_domain.ops = &irq_domain_simple_ops; irq_domain.of_node = pdev->dev.of_node; irq_domain_add(&irq_domain); - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { res = platform_get_resource(pdev, IORESOURCE_IRQ, i); if (!res) { dev_err(&pdev->dev, "Missing IRQ resource\n"); @@ -391,7 +415,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) gpiochip_add(&tegra_gpio_chip); - for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) { + for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) { int irq = irq_domain_to_irq(&irq_domain, gpio); /* No validity check; all Tegra GPIOs are valid IRQs */ @@ -404,7 +428,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) set_irq_flags(irq, IRQF_VALID); } - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { bank = &tegra_gpio_banks[i]; irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); -- cgit v1.2.3