From 0e37b159aa7427bf311487e3ea03d8aa5ff5956e Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 26 Sep 2006 23:02:34 -0400 Subject: [CPUFREQ] Fix cut-n-paste bug in suspend printk Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index d35a9f06ab7b..2caaf71d80c8 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -994,7 +994,7 @@ static int cpufreq_suspend(struct sys_device * sysdev, pm_message_t pmsg) unsigned int cur_freq = 0; struct cpufreq_policy *cpu_policy; - dprintk("resuming cpu %u\n", cpu); + dprintk("suspending cpu %u\n", cpu); if (!cpu_online(cpu)) return 0; -- cgit v1.2.3 From 0497c8ca282915a1c36d51db33fbf2629d7346f3 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 25 Sep 2006 11:23:32 -0700 Subject: [CPUFREQ] Fix section mismatch warning Make the sections proper and get rid of section mismatch warnings. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 4 ++-- arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index ea19d091fd41..a3fddc8d651d 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -396,13 +396,13 @@ static int acpi_cpufreq_early_init_acpi(void) */ static int bios_with_sw_any_bug; -static int __init sw_any_bug_found(struct dmi_system_id *d) +static int sw_any_bug_found(struct dmi_system_id *d) { bios_with_sw_any_bug = 1; return 0; } -static struct dmi_system_id __initdata sw_any_bug_dmi_table[] = { +static struct dmi_system_id sw_any_bug_dmi_table[] = { { .callback = sw_any_bug_found, .ident = "Supermicro Server X6DLP", diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 7a9325349e94..e8993baf3d14 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -386,7 +386,7 @@ static int centrino_cpu_early_init_acpi(void) * than OS intended it to run at. Detect it and handle it cleanly. */ static int bios_with_sw_any_bug; -static int __init sw_any_bug_found(struct dmi_system_id *d) +static int sw_any_bug_found(struct dmi_system_id *d) { bios_with_sw_any_bug = 1; return 0; -- cgit v1.2.3 From 7f1be8924791535c5fdc6749d1f119e141baa122 Mon Sep 17 00:00:00 2001 From: "rafalbilski@interia.pl" Date: Sun, 24 Sep 2006 20:28:13 +0200 Subject: [CPUFREQ] Longhaul - Disable arbiter CLE266 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Please ignore previous message. This patch is adding support for CPU connected to CLE266 chipset. For older CPU this is only way. For "Powersaver" processor this way will be used if ACPI C3 isn't supported. I have tested it. It seems to work exacly like ACPI. But it is less safe. On CLE266 chipset port 0x22 is blocking processor access to PCI bus too. Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 51 ++++++++++++++++++++++++--------- 1 file changed, 37 insertions(+), 14 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index f5cc9f5c9bab..4e8dd743d00b 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -178,11 +178,17 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) safe_halt(); /* Change frequency on next halt or sleep */ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_fadt.xpm_tmr_blk.address); + if (port22_en) { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C1 */ + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + } /* Disable bus ratio bit */ local_irq_disable(); @@ -567,16 +573,23 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, static int enable_arbiter_disable(void) { struct pci_dev *dev; + int reg; u8 pci_cmd; /* Find PLE133 host bridge */ + reg = 0x78; dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL); + /* Find CLE266 host bridge */ + if (dev == NULL) { + dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL); + reg = 0x76; + } if (dev != NULL) { /* Enable access to port 0x22 */ - pci_read_config_byte(dev, 0x78, &pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); if ( !(pci_cmd & 1<<7) ) { pci_cmd |= 1<<7; - pci_write_config_byte(dev, 0x78, pci_cmd); + pci_write_config_byte(dev, reg, pci_cmd); } return 1; } @@ -681,19 +694,29 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) /* Check ACPI support for C3 state */ cx = &pr->power.states[ACPI_STATE_C3]; if (cx->address == 0 || - (cx->latency > 1000 && ignore_latency == 0) ) - goto err_acpi; + (cx->latency > 1000 && ignore_latency == 0) ) { + if (enable_arbiter_disable()) { + port22_en = 1; + } else { + goto err_acpi; + } + } } else { /* Check ACPI support for bus master arbiter disable */ if (!pr->flags.bm_control) { - if (!enable_arbiter_disable()) { - printk(KERN_ERR PFX "No ACPI support. No VT8601 host bridge. Aborting.\n"); - return -ENODEV; - } else + if (enable_arbiter_disable()) { port22_en = 1; + } else { + goto err_acpi; + } } } + if (!port22_en) { + printk (KERN_INFO PFX "Using ACPI support.\n"); + } else { + printk (KERN_INFO PFX "Using northbridge support.\n"); + } ret = longhaul_get_ranges(); if (ret != 0) @@ -716,7 +739,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) return 0; err_acpi: - printk(KERN_ERR PFX "No ACPI support for CPU frequency changes.\n"); + printk(KERN_ERR PFX "No ACPI support. No VT8601 or VT8623 northbridge. Aborting.\n"); return -ENODEV; } -- cgit v1.2.3 From eed7d41257e2a2a38b3ad121b8948f7bfeaa21c0 Mon Sep 17 00:00:00 2001 From: Rafa³ Bilski Date: Wed, 27 Sep 2006 08:25:27 +0200 Subject: [CPUFREQ] longhaul: remove duplicated code. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit removing duplicated code. Signed-off-by: Rafa³ Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 4e8dd743d00b..7233abe5d695 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -581,8 +581,8 @@ static int enable_arbiter_disable(void) dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL); /* Find CLE266 host bridge */ if (dev == NULL) { - dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL); reg = 0x76; + dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL); } if (dev != NULL) { /* Enable access to port 0x22 */ @@ -693,25 +693,20 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) if (longhaul_version == TYPE_POWERSAVER) { /* Check ACPI support for C3 state */ cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address == 0 || - (cx->latency > 1000 && ignore_latency == 0) ) { - if (enable_arbiter_disable()) { - port22_en = 1; - } else { - goto err_acpi; - } + if (cx->address > 0 && + (cx->latency <= 1000 || ignore_latency != 0) ) { + goto print_support_type; } - - } else { - /* Check ACPI support for bus master arbiter disable */ - if (!pr->flags.bm_control) { - if (enable_arbiter_disable()) { - port22_en = 1; - } else { - goto err_acpi; - } + } + /* Check ACPI support for bus master arbiter disable */ + if (!pr->flags.bm_control) { + if (enable_arbiter_disable()) { + port22_en = 1; + } else { + goto err_acpi; } } +print_support_type: if (!port22_en) { printk (KERN_INFO PFX "Using ACPI support.\n"); } else { -- cgit v1.2.3 From bfeeb0f57940b143a55dcc7ee88e8842108d9145 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sat, 30 Sep 2006 23:19:38 -0400 Subject: [CPUFREQ] Make acpi-cpufreq unsticky again. This caused suspend/resume regressions. Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index a3fddc8d651d..57c880bf0bd6 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -597,7 +597,6 @@ static struct cpufreq_driver acpi_cpufreq_driver = { .name = "acpi-cpufreq", .owner = THIS_MODULE, .attr = acpi_cpufreq_attr, - .flags = CPUFREQ_STICKY, }; @@ -608,7 +607,7 @@ acpi_cpufreq_init (void) acpi_cpufreq_early_init_acpi(); - return cpufreq_register_driver(&acpi_cpufreq_driver); + return cpufreq_register_driver(&acpi_cpufreq_driver); } -- cgit v1.2.3