From 9a28f49adbe4955af8a1306fd36ddae15136dde7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 13 Jan 2006 18:04:41 +0100 Subject: [SCSI] mptsas: support basic hotplug Adds hotplug support for SAS end devices. Unfortunately the fusion firmware doesn't generate similar events for expanders addition/removal so we can't support them yet. Eric has an idea about a clever scheme to find out about expander changes so that'll be added later on. Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.h | 1 + drivers/message/fusion/mptsas.c | 338 +++++++++++++++++++++++++++++++++++---- 2 files changed, 308 insertions(+), 31 deletions(-) diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 6c48d1f54ac9..af9007d498ee 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -612,6 +612,7 @@ typedef struct _MPT_ADAPTER struct list_head list; struct net_device *netdev; struct list_head sas_topology; + struct mutex sas_topology_mutex; MPT_SAS_MGMT sas_mgmt; } MPT_ADAPTER; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 17e9757e728b..b2c682fe634f 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -5,7 +5,7 @@ * * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) - * Copyright (c) 2005 Dell + * Copyright (c) 2005-2006 Dell */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -86,6 +86,24 @@ static int mptsasInternalCtx = -1; /* Used only for internal commands */ static int mptsasMgmtCtx = -1; +enum mptsas_hotplug_action { + MPTSAS_ADD_DEVICE, + MPTSAS_DEL_DEVICE, +}; + +struct mptsas_hotplug_event { + struct work_struct work; + MPT_ADAPTER *ioc; + enum mptsas_hotplug_action event_type; + u64 sas_address; + u32 channel; + u32 id; + u32 device_info; + u16 handle; + u16 parent_handle; + u8 phy_id; +}; + /* * SAS topology structures * @@ -99,8 +117,8 @@ struct mptsas_devinfo { u8 phy_id; /* phy number of parent device */ u8 port_id; /* sas physical port this device is assoc'd with */ - u8 target; /* logical target id of this device */ - u8 bus; /* logical bus number of this device */ + u8 id; /* logical target id of this device */ + u8 channel; /* logical bus number of this device */ u64 sas_address; /* WWN of this device, SATA is assigned by HBA,expander */ u32 device_info; /* bitfield detailed info about this device */ @@ -114,6 +132,7 @@ struct mptsas_phyinfo { u8 programmed_link_rate; /* programmed max/min phy link rate */ struct mptsas_devinfo identify; /* point to phy device info */ struct mptsas_devinfo attached; /* point to attached device info */ + struct sas_phy *phy; struct sas_rphy *rphy; }; @@ -257,24 +276,27 @@ mptsas_slave_alloc(struct scsi_device *sdev) } rphy = dev_to_rphy(sdev->sdev_target->dev.parent); + mutex_lock(&hd->ioc->sas_topology_mutex); list_for_each_entry(p, &hd->ioc->sas_topology, list) { for (i = 0; i < p->num_phys; i++) { if (p->phy_info[i].attached.sas_address == rphy->identify.sas_address) { vdev->target_id = - p->phy_info[i].attached.target; - vdev->bus_id = p->phy_info[i].attached.bus; + p->phy_info[i].attached.id; + vdev->bus_id = p->phy_info[i].attached.channel; vdev->lun = sdev->lun; goto out; } } } + mutex_unlock(&hd->ioc->sas_topology_mutex); printk("No matching SAS device found!!\n"); kfree(vdev); return -ENODEV; out: + mutex_unlock(&hd->ioc->sas_topology_mutex); vtarget->ioc_id = vdev->ioc_id; vtarget->target_id = vdev->target_id; vtarget->bus_id = vdev->bus_id; @@ -282,6 +304,42 @@ mptsas_slave_alloc(struct scsi_device *sdev) return 0; } +static void +mptsas_slave_destroy(struct scsi_device *sdev) +{ + struct Scsi_Host *host = sdev->host; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + struct sas_rphy *rphy; + struct mptsas_portinfo *p; + int i; + + /* + * Handle hotplug removal case. + * We need to clear out attached data structure. + */ + rphy = dev_to_rphy(sdev->sdev_target->dev.parent); + + mutex_lock(&hd->ioc->sas_topology_mutex); + list_for_each_entry(p, &hd->ioc->sas_topology, list) { + for (i = 0; i < p->num_phys; i++) { + if (p->phy_info[i].attached.sas_address == + rphy->identify.sas_address) { + memset(&p->phy_info[i].attached, 0, + sizeof(struct mptsas_devinfo)); + p->phy_info[i].rphy = NULL; + goto out; + } + } + } + + out: + mutex_unlock(&hd->ioc->sas_topology_mutex); + /* + * TODO: Issue target reset to flush firmware outstanding commands. + */ + mptscsih_slave_destroy(sdev); +} + static struct scsi_host_template mptsas_driver_template = { .module = THIS_MODULE, .proc_name = "mptsas", @@ -293,7 +351,7 @@ static struct scsi_host_template mptsas_driver_template = { .slave_alloc = mptsas_slave_alloc, .slave_configure = mptscsih_slave_configure, .target_destroy = mptscsih_target_destroy, - .slave_destroy = mptscsih_slave_destroy, + .slave_destroy = mptsas_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, .eh_device_reset_handler = mptscsih_dev_reset, @@ -649,8 +707,8 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info, device_info->handle = le16_to_cpu(buffer->DevHandle); device_info->phy_id = buffer->PhyNum; device_info->port_id = buffer->PhysicalPort; - device_info->target = buffer->TargetID; - device_info->bus = buffer->Bus; + device_info->id = buffer->TargetID; + device_info->channel = buffer->Bus; memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64)); device_info->sas_address = le64_to_cpu(sas_address); device_info->device_info = @@ -858,36 +916,36 @@ mptsas_parse_device_info(struct sas_identify *identify, static int mptsas_probe_one_phy(struct device *dev, struct mptsas_phyinfo *phy_info, int index, int local) { - struct sas_phy *port; + struct sas_phy *phy; int error; - port = sas_phy_alloc(dev, index); - if (!port) + phy = sas_phy_alloc(dev, index); + if (!phy) return -ENOMEM; - port->port_identifier = phy_info->port_id; - mptsas_parse_device_info(&port->identify, &phy_info->identify); + phy->port_identifier = phy_info->port_id; + mptsas_parse_device_info(&phy->identify, &phy_info->identify); /* * Set Negotiated link rate. */ switch (phy_info->negotiated_link_rate) { case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED: - port->negotiated_linkrate = SAS_PHY_DISABLED; + phy->negotiated_linkrate = SAS_PHY_DISABLED; break; case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION: - port->negotiated_linkrate = SAS_LINK_RATE_FAILED; + phy->negotiated_linkrate = SAS_LINK_RATE_FAILED; break; case MPI_SAS_IOUNIT0_RATE_1_5: - port->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_IOUNIT0_RATE_3_0: - port->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; + phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; break; case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE: case MPI_SAS_IOUNIT0_RATE_UNKNOWN: default: - port->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; + phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; break; } @@ -896,10 +954,10 @@ static int mptsas_probe_one_phy(struct device *dev, */ switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5: - port->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; + phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: - port->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; + phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; break; default: break; @@ -911,10 +969,10 @@ static int mptsas_probe_one_phy(struct device *dev, switch (phy_info->programmed_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5: - port->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: - port->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS; + phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS; break; default: break; @@ -925,10 +983,10 @@ static int mptsas_probe_one_phy(struct device *dev, */ switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) { case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5: - port->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; + phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: - port->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; + phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; break; default: break; @@ -940,28 +998,29 @@ static int mptsas_probe_one_phy(struct device *dev, switch (phy_info->programmed_link_rate & MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) { case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5: - port->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: - port->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS; + phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS; break; default: break; } if (local) - port->local_attached = 1; + phy->local_attached = 1; - error = sas_phy_add(port); + error = sas_phy_add(phy); if (error) { - sas_phy_free(port); + sas_phy_free(phy); return error; } + phy_info->phy = phy; if (phy_info->attached.handle) { struct sas_rphy *rphy; - rphy = sas_rphy_alloc(port); + rphy = sas_rphy_alloc(phy); if (!rphy) return 0; /* non-fatal: an rphy can be added later */ @@ -994,7 +1053,10 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index) if (error) goto out_free_port_info; + mutex_lock(&ioc->sas_topology_mutex); list_add_tail(&port_info->list, &ioc->sas_topology); + mutex_unlock(&ioc->sas_topology_mutex); + for (i = 0; i < port_info->num_phys; i++) { mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i], (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER << @@ -1047,7 +1109,10 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) *handle = port_info->handle; + mutex_lock(&ioc->sas_topology_mutex); list_add_tail(&port_info->list, &ioc->sas_topology); + mutex_unlock(&ioc->sas_topology_mutex); + for (i = 0; i < port_info->num_phys; i++) { struct device *parent; @@ -1079,6 +1144,7 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) * HBA phys. */ parent = &ioc->sh->shost_gendev; + mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry(p, &ioc->sas_topology, list) { for (j = 0; j < p->num_phys; j++) { if (port_info->phy_info[i].identify.handle == @@ -1086,6 +1152,7 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) parent = &p->phy_info[j].rphy->dev; } } + mutex_unlock(&ioc->sas_topology_mutex); mptsas_probe_one_phy(parent, &port_info->phy_info[i], *index, 0); @@ -1111,6 +1178,211 @@ mptsas_scan_sas_topology(MPT_ADAPTER *ioc) ; } +static struct mptsas_phyinfo * +mptsas_find_phyinfo_by_parent(MPT_ADAPTER *ioc, u16 parent_handle, u8 phy_id) +{ + struct mptsas_portinfo *port_info; + struct mptsas_devinfo device_info; + struct mptsas_phyinfo *phy_info = NULL; + int i, error; + + /* + * Retrieve the parent sas_address + */ + error = mptsas_sas_device_pg0(ioc, &device_info, + (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << + MPI_SAS_DEVICE_PGAD_FORM_SHIFT), + parent_handle); + if (error) { + printk("mptsas: failed to retrieve device page\n"); + return NULL; + } + + /* + * The phy_info structures are never deallocated during lifetime of + * a host, so the code below is safe without additional refcounting. + */ + mutex_lock(&ioc->sas_topology_mutex); + list_for_each_entry(port_info, &ioc->sas_topology, list) { + for (i = 0; i < port_info->num_phys; i++) { + if (port_info->phy_info[i].identify.sas_address == + device_info.sas_address && + port_info->phy_info[i].phy_id == phy_id) { + phy_info = &port_info->phy_info[i]; + break; + } + } + } + mutex_unlock(&ioc->sas_topology_mutex); + + return phy_info; +} + +static struct mptsas_phyinfo * +mptsas_find_phyinfo_by_handle(MPT_ADAPTER *ioc, u16 handle) +{ + struct mptsas_portinfo *port_info; + struct mptsas_phyinfo *phy_info = NULL; + int i; + + /* + * The phy_info structures are never deallocated during lifetime of + * a host, so the code below is safe without additional refcounting. + */ + mutex_lock(&ioc->sas_topology_mutex); + list_for_each_entry(port_info, &ioc->sas_topology, list) { + for (i = 0; i < port_info->num_phys; i++) { + if (port_info->phy_info[i].attached.handle == handle) { + phy_info = &port_info->phy_info[i]; + break; + } + } + } + mutex_unlock(&ioc->sas_topology_mutex); + + return phy_info; +} + +static void +mptsas_hotplug_work(void *arg) +{ + struct mptsas_hotplug_event *ev = arg; + MPT_ADAPTER *ioc = ev->ioc; + struct mptsas_phyinfo *phy_info; + struct sas_rphy *rphy; + char *ds = NULL; + + if (ev->device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET) + ds = "ssp"; + if (ev->device_info & MPI_SAS_DEVICE_INFO_STP_TARGET) + ds = "stp"; + if (ev->device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "sata"; + + switch (ev->event_type) { + case MPTSAS_DEL_DEVICE: + printk(MYIOC_s_INFO_FMT + "removing %s device, channel %d, id %d, phy %d\n", + ioc->name, ds, ev->channel, ev->id, ev->phy_id); + + phy_info = mptsas_find_phyinfo_by_handle(ioc, ev->handle); + if (!phy_info) { + printk("mptsas: remove event for non-existant PHY.\n"); + break; + } + + if (phy_info->rphy) { + sas_rphy_delete(phy_info->rphy); + phy_info->rphy = NULL; + } + break; + case MPTSAS_ADD_DEVICE: + printk(MYIOC_s_INFO_FMT + "attaching %s device, channel %d, id %d, phy %d\n", + ioc->name, ds, ev->channel, ev->id, ev->phy_id); + + phy_info = mptsas_find_phyinfo_by_parent(ioc, + ev->parent_handle, ev->phy_id); + if (!phy_info) { + printk("mptsas: add event for non-existant PHY.\n"); + break; + } + + if (phy_info->rphy) { + printk("mptsas: trying to add existing device.\n"); + break; + } + + /* fill attached info */ + phy_info->attached.handle = ev->handle; + phy_info->attached.phy_id = ev->phy_id; + phy_info->attached.port_id = phy_info->identify.port_id; + phy_info->attached.id = ev->id; + phy_info->attached.channel = ev->channel; + phy_info->attached.sas_address = ev->sas_address; + phy_info->attached.device_info = ev->device_info; + + rphy = sas_rphy_alloc(phy_info->phy); + if (!rphy) + break; /* non-fatal: an rphy can be added later */ + + mptsas_parse_device_info(&rphy->identify, &phy_info->attached); + if (sas_rphy_add(rphy)) { + sas_rphy_free(rphy); + break; + } + + phy_info->rphy = rphy; + break; + } + + kfree(ev); +} + +static void +mptscsih_send_sas_event(MPT_ADAPTER *ioc, + EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data) +{ + struct mptsas_hotplug_event *ev; + u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo); + __le64 sas_address; + + if ((device_info & + (MPI_SAS_DEVICE_INFO_SSP_TARGET | + MPI_SAS_DEVICE_INFO_STP_TARGET | + MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0) + return; + + if ((sas_event_data->ReasonCode & + (MPI_EVENT_SAS_DEV_STAT_RC_ADDED | + MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING)) == 0) + return; + + ev = kmalloc(sizeof(*ev), GFP_ATOMIC); + if (!ev) { + printk(KERN_WARNING "mptsas: lost hotplug event\n"); + return; + } + + + INIT_WORK(&ev->work, mptsas_hotplug_work, ev); + ev->ioc = ioc; + ev->handle = le16_to_cpu(sas_event_data->DevHandle); + ev->parent_handle = le16_to_cpu(sas_event_data->ParentDevHandle); + ev->channel = sas_event_data->Bus; + ev->id = sas_event_data->TargetID; + ev->phy_id = sas_event_data->PhyNum; + memcpy(&sas_address, &sas_event_data->SASAddress, sizeof(__le64)); + ev->sas_address = le64_to_cpu(sas_address); + ev->device_info = device_info; + + if (sas_event_data->ReasonCode & MPI_EVENT_SAS_DEV_STAT_RC_ADDED) + ev->event_type = MPTSAS_ADD_DEVICE; + else + ev->event_type = MPTSAS_DEL_DEVICE; + + schedule_work(&ev->work); +} + +static int +mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply) +{ + u8 event = le32_to_cpu(reply->Event) & 0xFF; + + if (!ioc->sh) + return 1; + + switch (event) { + case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: + mptscsih_send_sas_event(ioc, + (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data); + return 1; /* currently means nothing really */ + + default: + return mptscsih_event_process(ioc, reply); + } +} + static int mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -1203,6 +1475,8 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->unique_id = ioc->id; INIT_LIST_HEAD(&ioc->sas_topology); + mutex_init(&ioc->sas_topology_mutex); + init_MUTEX(&ioc->sas_mgmt.mutex); init_completion(&ioc->sas_mgmt.done); @@ -1339,10 +1613,12 @@ static void __devexit mptsas_remove(struct pci_dev *pdev) sas_remove_host(ioc->sh); + mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry_safe(p, n, &ioc->sas_topology, list) { list_del(&p->list); kfree(p); } + mutex_unlock(&ioc->sas_topology_mutex); mptscsih_remove(pdev); } @@ -1393,7 +1669,7 @@ mptsas_init(void) mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER); mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER); - if (mpt_event_register(mptsasDoneCtx, mptscsih_event_process) == 0) { + if (mpt_event_register(mptsasDoneCtx, mptsas_event_process) == 0) { devtprintk((KERN_INFO MYNAM ": Registered for IOC event notifications\n")); } -- cgit v1.2.3