From 8e409f1d06686882c4c48ff04babce0469afe1b6 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 13 Feb 2017 08:47:51 -0200 Subject: [media] s5p-mfc: Remove special configuration of IOMMU domain The main reason for using special configuration of IOMMU domain was the problem with MFC firmware, which failed to operate properly when placed at 0 DMA address. Instead of adding custom code for configuring each variant of IOMMU domain and architecture specific glue code, simply use what arch code provides and if the DMA base address equals zero, skip first 128 KiB to keep required alignment. This patch also make the driver operational on ARM64 architecture, because it no longer depends on ARM specific DMA-mapping and IOMMU glue code functions. Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Acked-by: Andrzej Hajda Tested-by: Smitha T Murthy Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-mfc/s5p_mfc.c | 30 +++++++-------- drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h | 51 +------------------------- 2 files changed, 14 insertions(+), 67 deletions(-) diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index e3d760516c4c..e6a81aa50c8e 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -1179,18 +1179,6 @@ static int s5p_mfc_configure_common_memory(struct s5p_mfc_dev *mfc_dev) struct device *dev = &mfc_dev->plat_dev->dev; unsigned long mem_size = SZ_8M; unsigned int bitmap_size; - /* - * When IOMMU is available, we cannot use the default configuration, - * because of MFC firmware requirements: address space limited to - * 256M and non-zero default start address. - * This is still simplified, not optimal configuration, but for now - * IOMMU core doesn't allow to configure device's IOMMUs channel - * separately. - */ - int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE, - S5P_MFC_IOMMU_DMA_SIZE); - if (ret) - return ret; if (mfc_mem_size) mem_size = memparse(mfc_mem_size, NULL); @@ -1198,10 +1186,8 @@ static int s5p_mfc_configure_common_memory(struct s5p_mfc_dev *mfc_dev) bitmap_size = BITS_TO_LONGS(mem_size >> PAGE_SHIFT) * sizeof(long); mfc_dev->mem_bitmap = kzalloc(bitmap_size, GFP_KERNEL); - if (!mfc_dev->mem_bitmap) { - exynos_unconfigure_iommu(dev); + if (!mfc_dev->mem_bitmap) return -ENOMEM; - } mfc_dev->mem_virt = dma_alloc_coherent(dev, mem_size, &mfc_dev->mem_base, GFP_KERNEL); @@ -1209,13 +1195,24 @@ static int s5p_mfc_configure_common_memory(struct s5p_mfc_dev *mfc_dev) kfree(mfc_dev->mem_bitmap); dev_err(dev, "failed to preallocate %ld MiB for the firmware and context buffers\n", (mem_size / SZ_1M)); - exynos_unconfigure_iommu(dev); return -ENOMEM; } mfc_dev->mem_size = mem_size; mfc_dev->dma_base[BANK1_CTX] = mfc_dev->mem_base; mfc_dev->dma_base[BANK2_CTX] = mfc_dev->mem_base; + /* + * MFC hardware cannot handle 0 as a base address, so mark first 128K + * as used (to keep required base alignment) and adjust base address + */ + if (mfc_dev->mem_base == (dma_addr_t)0) { + unsigned int offset = 1 << MFC_BASE_ALIGN_ORDER; + + bitmap_set(mfc_dev->mem_bitmap, 0, offset >> PAGE_SHIFT); + mfc_dev->dma_base[BANK1_CTX] += offset; + mfc_dev->dma_base[BANK2_CTX] += offset; + } + /* Firmware allocation cannot fail in this case */ s5p_mfc_alloc_firmware(mfc_dev); @@ -1232,7 +1229,6 @@ static void s5p_mfc_unconfigure_common_memory(struct s5p_mfc_dev *mfc_dev) { struct device *dev = &mfc_dev->plat_dev->dev; - exynos_unconfigure_iommu(dev); dma_free_coherent(dev, mfc_dev->mem_size, mfc_dev->mem_virt, mfc_dev->mem_base); kfree(mfc_dev->mem_bitmap); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h index 6962132ae8fa..76667924ee2a 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h @@ -11,54 +11,13 @@ #ifndef S5P_MFC_IOMMU_H_ #define S5P_MFC_IOMMU_H_ -#define S5P_MFC_IOMMU_DMA_BASE 0x20000000lu -#define S5P_MFC_IOMMU_DMA_SIZE SZ_256M - -#if defined(CONFIG_EXYNOS_IOMMU) && defined(CONFIG_ARM_DMA_USE_IOMMU) - -#include +#if defined(CONFIG_EXYNOS_IOMMU) static inline bool exynos_is_iommu_available(struct device *dev) { return dev->archdata.iommu != NULL; } -static inline void exynos_unconfigure_iommu(struct device *dev) -{ - struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); - - arm_iommu_detach_device(dev); - arm_iommu_release_mapping(mapping); -} - -static inline int exynos_configure_iommu(struct device *dev, - unsigned int base, unsigned int size) -{ - struct dma_iommu_mapping *mapping = NULL; - int ret; - - /* Disable the default mapping created by device core */ - if (to_dma_iommu_mapping(dev)) - exynos_unconfigure_iommu(dev); - - mapping = arm_iommu_create_mapping(dev->bus, base, size); - if (IS_ERR(mapping)) { - pr_warn("Failed to create IOMMU mapping for device %s\n", - dev_name(dev)); - return PTR_ERR(mapping); - } - - ret = arm_iommu_attach_device(dev, mapping); - if (ret) { - pr_warn("Failed to attached device %s to IOMMU_mapping\n", - dev_name(dev)); - arm_iommu_release_mapping(mapping); - return ret; - } - - return 0; -} - #else static inline bool exynos_is_iommu_available(struct device *dev) @@ -66,14 +25,6 @@ static inline bool exynos_is_iommu_available(struct device *dev) return false; } -static inline int exynos_configure_iommu(struct device *dev, - unsigned int base, unsigned int size) -{ - return -ENOSYS; -} - -static inline void exynos_unconfigure_iommu(struct device *dev) { } - #endif #endif /* S5P_MFC_IOMMU_H_ */ -- cgit v1.2.3