From 7c00ffa314bf0fb0e23858bbebad33b48b6abbb9 Mon Sep 17 00:00:00 2001 From: Mark Haverkamp Date: Mon, 16 May 2005 18:28:42 -0700 Subject: [SCSI] 2.6 aacraid: Variable FIB size (updated patch) New code from the Adaptec driver. Performance enhancement for newer adapters. I hope that this isn't too big for a single patch. I believe that other than the few small cleanups mentioned, that the changes are all related. - Added Variable FIB size negotiation for new adapters. - Added support to maximize scatter gather tables and thus permit requests larger than 64KB/each. - Limit Scatter Gather to 34 elements for ROMB platforms. - aac_printf is only enabled with AAC_QUIRK_34SG - Large FIB ioctl support - some minor cleanup Passes sparse check. I have tested it on x86 and ppc64 machines. Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 132 ++++++++++++++++++++--------- drivers/scsi/aacraid/aacraid.h | 70 +++++++++++++--- drivers/scsi/aacraid/commctrl.c | 180 +++++++++++++++++++++++++--------------- drivers/scsi/aacraid/comminit.c | 86 ++++++++++++++++++- drivers/scsi/aacraid/commsup.c | 85 +++++++++++-------- drivers/scsi/aacraid/linit.c | 33 +++++++- drivers/scsi/aacraid/rkt.c | 39 +++++---- drivers/scsi/aacraid/rx.c | 40 +++++---- drivers/scsi/aacraid/sa.c | 31 +++++-- 9 files changed, 501 insertions(+), 195 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 9946e305055b..f02c99641467 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -53,10 +53,6 @@ #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */ #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */ -#define MAX_FIB_DATA (sizeof(struct hw_fib) - sizeof(FIB_HEADER)) - -#define MAX_DRIVER_SG_SEGMENT_COUNT 17 - /* * Sense codes */ @@ -158,6 +154,13 @@ MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0 module_param(commit, int, 0); MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on"); +int numacb = -1; +module_param(numacb, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid\nvalues are 512 and down. Default is to use suggestion from Firmware."); + +int acbsize = -1; +module_param(acbsize, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512,\n2048, 4096 and 8192. Default is to use suggestion from Firmware."); /** * aac_get_config_status - check the adapter configuration * @common: adapter to query @@ -462,7 +465,7 @@ static int probe_container(struct aac_dev *dev, int cid) 1, 1, NULL, NULL); if (status < 0) { - printk(KERN_WARNING "aacraid: probe_containers query failed.\n"); + printk(KERN_WARNING "aacraid: probe_container query failed.\n"); goto error; } @@ -605,35 +608,63 @@ static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code, int aac_get_adapter_info(struct aac_dev* dev) { struct fib* fibptr; - struct aac_adapter_info* info; int rcode; u32 tmp; + struct aac_adapter_info * info; + if (!(fibptr = fib_alloc(dev))) return -ENOMEM; fib_init(fibptr); - info = (struct aac_adapter_info*) fib_data(fibptr); - - memset(info,0,sizeof(struct aac_adapter_info)); + info = (struct aac_adapter_info *) fib_data(fibptr); + memset(info,0,sizeof(*info)); rcode = fib_send(RequestAdapterInfo, - fibptr, - sizeof(struct aac_adapter_info), - FsaNormal, - 1, 1, - NULL, - NULL); + fibptr, + sizeof(*info), + FsaNormal, + 1, 1, + NULL, + NULL); + + if (rcode < 0) { + fib_complete(fibptr); + fib_free(fibptr); + return rcode; + } + memcpy(&dev->adapter_info, info, sizeof(*info)); - memcpy(&dev->adapter_info, info, sizeof(struct aac_adapter_info)); + if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) { + struct aac_supplement_adapter_info * info; + + fib_init(fibptr); + + info = (struct aac_supplement_adapter_info *) fib_data(fibptr); + + memset(info,0,sizeof(*info)); + + rcode = fib_send(RequestSupplementAdapterInfo, + fibptr, + sizeof(*info), + FsaNormal, + 1, 1, + NULL, + NULL); + + if (rcode >= 0) + memcpy(&dev->supplement_adapter_info, info, sizeof(*info)); + } tmp = le32_to_cpu(dev->adapter_info.kernelrev); - printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d]\n", + printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", dev->name, dev->id, tmp>>24, (tmp>>16)&0xff, tmp&0xff, - le32_to_cpu(dev->adapter_info.kernelbuild)); + le32_to_cpu(dev->adapter_info.kernelbuild), + (int)sizeof(dev->supplement_adapter_info.BuildDate), + dev->supplement_adapter_info.BuildDate); tmp = le32_to_cpu(dev->adapter_info.monitorrev); printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n", dev->name, dev->id, @@ -707,6 +738,38 @@ int aac_get_adapter_info(struct aac_dev* dev) rcode = -ENOMEM; } } + /* + * 57 scatter gather elements + */ + dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size - + sizeof(struct aac_fibhdr) - + sizeof(struct aac_write) + sizeof(struct sgmap)) / + sizeof(struct sgmap); + if (dev->dac_support) { + /* + * 38 scatter gather elements + */ + dev->scsi_host_ptr->sg_tablesize = + (dev->max_fib_size - + sizeof(struct aac_fibhdr) - + sizeof(struct aac_write64) + + sizeof(struct sgmap64)) / + sizeof(struct sgmap64); + } + dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT; + if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) { + /* + * Worst case size that could cause sg overflow when + * we break up SG elements that are larger than 64KB. + * Would be nice if we could tell the SCSI layer what + * the maximum SG element size can be. Worst case is + * (sg_tablesize-1) 4KB elements with one 64KB + * element. + * 32bit -> 468 or 238KB 64bit -> 424 or 212KB + */ + dev->scsi_host_ptr->max_sectors = + (dev->scsi_host_ptr->sg_tablesize * 8) + 112; + } fib_complete(fibptr); fib_free(fibptr); @@ -747,8 +810,10 @@ static void read_callback(void *context, struct fib * fibptr) if (le32_to_cpu(readreply->status) == ST_OK) scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; else { - printk(KERN_WARNING "read_callback: read failed, status = %d\n", - le32_to_cpu(readreply->status)); +#ifdef AAC_DETAILED_STATUS_INFO + printk(KERN_WARNING "read_callback: io failed, status = %d\n", + le32_to_cpu(readreply->status)); +#endif scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; set_sense((u8 *) &dev->fsa_dev[cid].sense_data, HARDWARE_ERROR, @@ -842,7 +907,8 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) lba = (scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; } - dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %u, t = %ld.\n", smp_processor_id(), lba, jiffies)); + dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %u, t = %ld.\n", + smp_processor_id(), (unsigned long long)lba, jiffies)); /* * Alocate and initialize a Fib */ @@ -852,7 +918,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) fib_init(cmd_fibcontext); - if(dev->dac_support == 1) { + if (dev->dac_support == 1) { struct aac_read64 *readcmd; readcmd = (struct aac_read64 *) fib_data(cmd_fibcontext); readcmd->command = cpu_to_le32(VM_CtHostRead64); @@ -886,14 +952,11 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid) readcmd->block = cpu_to_le32(lba); readcmd->count = cpu_to_le32(count * 512); - if (count * 512 > (64 * 1024)) - BUG(); - aac_build_sg(scsicmd, &readcmd->sg); fibsize = sizeof(struct aac_read) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentry)); - BUG_ON (fibsize > (sizeof(struct hw_fib) - + BUG_ON (fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); /* * Now send the Fib to the adapter @@ -976,7 +1039,7 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid) fibsize = sizeof(struct aac_write64) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentry64)); - BUG_ON (fibsize > (sizeof(struct hw_fib) - + BUG_ON (fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); /* * Now send the Fib to the adapter @@ -998,15 +1061,11 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid) writecmd->sg.count = cpu_to_le32(1); /* ->stable is not used - it did mean which type of write */ - if (count * 512 > (64 * 1024)) { - BUG(); - } - aac_build_sg(scsicmd, &writecmd->sg); fibsize = sizeof(struct aac_write) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentry)); - BUG_ON (fibsize > (sizeof(struct hw_fib) - + BUG_ON (fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); /* * Now send the Fib to the adapter @@ -1025,7 +1084,6 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid) */ if (status == -EINPROGRESS) { - dprintk("write queued.\n"); return 0; } @@ -1111,7 +1169,7 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid) return SCSI_MLQUEUE_DEVICE_BUSY; /* - * Alocate and initialize a Fib + * Allocate and initialize a Fib */ if (!(cmd_fibcontext = fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) @@ -1403,7 +1461,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) /* * Unhandled commands */ - printk(KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]); + dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0])); scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; set_sense((u8 *) &dev->fsa_dev[cid].sense_data, ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, @@ -1818,7 +1876,7 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd) fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) + ((le32_to_cpu(srbcmd->sg.count) & 0xff) * sizeof (struct sgentry64)); - BUG_ON (fibsize > (sizeof(struct hw_fib) - + BUG_ON (fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); /* @@ -1840,7 +1898,7 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd) fibsize = sizeof (struct aac_srb) + (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) * sizeof (struct sgentry)); - BUG_ON (fibsize > (sizeof(struct hw_fib) - + BUG_ON (fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); /* diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index a250a6f359b1..42484417cef7 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -8,12 +8,18 @@ #define MAXIMUM_NUM_CONTAINERS 32 -#define AAC_NUM_FIB (256 + 64) -#define AAC_NUM_IO_FIB 100 +#define AAC_NUM_MGT_FIB 8 +#define AAC_NUM_IO_FIB (512 - AAC_NUM_MGT_FIB) +#define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB) #define AAC_MAX_LUN (8) #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff) +/* + * max_sectors is an unsigned short, otherwise limit is 0x100000000 / 512 + * Linux has starvation problems if we permit larger than 4MB I/O ... + */ +#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)8192) /* * These macros convert from physical channels to virtual channels @@ -303,12 +309,9 @@ struct aac_fibhdr { } _u; }; -#define FIB_DATA_SIZE_IN_BYTES (512 - sizeof(struct aac_fibhdr)) - - struct hw_fib { struct aac_fibhdr header; - u8 data[FIB_DATA_SIZE_IN_BYTES]; // Command specific data + u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data }; /* @@ -370,11 +373,12 @@ struct hw_fib { #define RequestAdapterInfo 703 #define IsAdapterPaused 704 #define SendHostTime 705 -#define LastMiscCommand 706 +#define RequestSupplementAdapterInfo 706 +#define LastMiscCommand 707 -// -// Commands that will target the failover level on the FSA adapter -// +/* + * Commands that will target the failover level on the FSA adapter + */ enum fib_xfer_state { HostOwned = (1<<0), @@ -407,6 +411,7 @@ enum fib_xfer_state { */ #define ADAPTER_INIT_STRUCT_REVISION 3 +#define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science struct aac_init { @@ -424,6 +429,14 @@ struct aac_init __le32 HostPhysMemPages; /* number of 4k pages of host physical memory */ __le32 HostElapsedSeconds; /* number of seconds since 1970. */ + /* + * ADAPTER_INIT_STRUCT_REVISION_4 begins here + */ + __le32 InitFlags; /* flags for supported features */ +#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001 + __le32 MaxIoCommands; /* max outstanding commands */ + __le32 MaxIoSize; /* largest I/O command */ + __le32 MaxFibSize; /* largest FIB to adapter */ }; enum aac_log_level { @@ -447,7 +460,7 @@ struct adapter_ops { void (*adapter_interrupt)(struct aac_dev *dev); void (*adapter_notify)(struct aac_dev *dev, u32 event); - int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 *status); + int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4); int (*adapter_check_health)(struct aac_dev *dev); }; @@ -567,6 +580,7 @@ struct sa_drawbridge_CSR { #define Mailbox3 SaDbCSR.MAILBOX3 #define Mailbox4 SaDbCSR.MAILBOX4 #define Mailbox5 SaDbCSR.MAILBOX5 +#define Mailbox6 SaDbCSR.MAILBOX6 #define Mailbox7 SaDbCSR.MAILBOX7 #define DoorbellReg_p SaDbCSR.PRISETIRQ @@ -812,6 +826,25 @@ struct aac_adapter_info __le32 OEM; }; +struct aac_supplement_adapter_info +{ + u8 AdapterTypeText[17+1]; + u8 Pad[2]; + __le32 FlashMemoryByteSize; + __le32 FlashImageId; + __le32 MaxNumberPorts; + __le32 Version; + __le32 FeatureBits; + u8 SlotNumber; + u8 ReservedPad0[0]; + u8 BuildDate[12]; + __le32 CurrentNumberPorts; + __le32 ReservedGrowth[24]; +}; +#define AAC_FEATURE_FALCON 0x00000010 +#define AAC_SIS_VERSION_V3 3 +#define AAC_SIS_SLOT_UNKNOWN 0xFF + /* * Battery platforms */ @@ -856,6 +889,12 @@ struct aac_dev int id; u16 irq_mask; + /* + * negotiated FIB settings + */ + unsigned max_fib_size; + unsigned sg_tablesize; + /* * Map for 128 fib objects (64k) */ @@ -915,12 +954,14 @@ struct aac_dev u32 aif_thread; struct completion aif_completion; struct aac_adapter_info adapter_info; + struct aac_supplement_adapter_info supplement_adapter_info; /* These are in adapter info but they are in the io flow so * lets break them out so we don't have to do an AND to check them */ u8 nondasd_support; u8 dac_support; u8 raid_scsi_mode; + u8 printf_enabled; }; #define aac_adapter_interrupt(dev) \ @@ -929,6 +970,8 @@ struct aac_dev #define aac_adapter_notify(dev, event) \ (dev)->a_ops.adapter_notify(dev, event) +#define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \ + (dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) #define aac_adapter_check_health(dev) \ (dev)->a_ops.adapter_check_health(dev) @@ -1327,7 +1370,7 @@ struct aac_commit_config { }; /* - * Query for Container Configuration Count + * Query for Container Configuration Status */ #define CT_GET_CONTAINER_COUNT 4 @@ -1481,6 +1524,7 @@ struct revision #define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) #define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER) #define FSACTL_GET_CONTAINERS 2131 +#define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED) struct aac_common @@ -1667,3 +1711,5 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size); struct aac_driver_ident* aac_get_driver_ident(int devtype); int aac_get_adapter_info(struct aac_dev* dev); int aac_send_shutdown(struct aac_dev *dev); +extern int numacb; +extern int acbsize; diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index e6da87d17832..fc268a410c27 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -51,15 +51,22 @@ * This routine sends a fib to the adapter on behalf of a user level * program. */ +# define AAC_DEBUG_PREAMBLE KERN_INFO +# define AAC_DEBUG_POSTAMBLE static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) { struct hw_fib * kfib; struct fib *fibptr; + struct hw_fib * hw_fib = (struct hw_fib *)0; + dma_addr_t hw_fib_pa = (dma_addr_t)0LL; + unsigned size; + int retval; fibptr = fib_alloc(dev); - if(fibptr == NULL) + if(fibptr == NULL) { return -ENOMEM; + } kfib = fibptr->hw_fib; /* @@ -74,16 +81,21 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) * will not overrun the buffer when we copy the memory. Return * an error if we would. */ - if (le16_to_cpu(kfib->header.Size) > - sizeof(struct hw_fib) - sizeof(struct aac_fibhdr)) { - fib_free(fibptr); - return -EINVAL; + size = le16_to_cpu(kfib->header.Size) + sizeof(struct aac_fibhdr); + if (size < le16_to_cpu(kfib->header.SenderSize)) + size = le16_to_cpu(kfib->header.SenderSize); + if (size > dev->max_fib_size) { + /* Highjack the hw_fib */ + hw_fib = fibptr->hw_fib; + hw_fib_pa = fibptr->hw_fib_pa; + fibptr->hw_fib = kfib = pci_alloc_consistent(dev->pdev, size, &fibptr->hw_fib_pa); + memset(((char *)kfib) + dev->max_fib_size, 0, size - dev->max_fib_size); + memcpy(kfib, hw_fib, dev->max_fib_size); } - if (copy_from_user(kfib, arg, le16_to_cpu(kfib->header.Size) + - sizeof(struct aac_fibhdr))) { - fib_free(fibptr); - return -EFAULT; + if (copy_from_user(kfib, arg, size)) { + retval = -EFAULT; + goto cleanup; } if (kfib->header.Command == cpu_to_le16(TakeABreakPt)) { @@ -94,16 +106,15 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) */ kfib->header.XferState = 0; } else { - int retval = fib_send(le16_to_cpu(kfib->header.Command), fibptr, + retval = fib_send(le16_to_cpu(kfib->header.Command), fibptr, le16_to_cpu(kfib->header.Size) , FsaNormal, 1, 1, NULL, NULL); if (retval) { - fib_free(fibptr); - return retval; + goto cleanup; } if (fib_complete(fibptr) != 0) { - fib_free(fibptr); - return -EINVAL; + retval = -EINVAL; + goto cleanup; } } /* @@ -114,12 +125,17 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) * was already included by the adapter.) */ - if (copy_to_user(arg, (void *)kfib, le16_to_cpu(kfib->header.Size))) { - fib_free(fibptr); - return -EFAULT; + retval = 0; + if (copy_to_user(arg, (void *)kfib, size)) + retval = -EFAULT; +cleanup: + if (hw_fib) { + pci_free_consistent(dev->pdev, size, kfib, fibptr->hw_fib_pa); + fibptr->hw_fib_pa = hw_fib_pa; + fibptr->hw_fib = hw_fib; } fib_free(fibptr); - return 0; + return retval; } /** @@ -399,6 +415,7 @@ static int check_revision(struct aac_dev *dev, void __user *arg) return 0; } + /** * * aac_send_raw_scb @@ -427,7 +444,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) if (!capable(CAP_SYS_ADMIN)){ - printk(KERN_DEBUG"aacraid: No permission to send raw srb\n"); + dprintk((KERN_DEBUG"aacraid: No permission to send raw srb\n")); return -EPERM; } /* @@ -440,20 +457,26 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) srbcmd = (struct aac_srb*) fib_data(srbfib); + memset(sg_list, 0, sizeof(sg_list)); /* cleanup may take issue */ if(copy_from_user(&fibsize, &user_srb->count,sizeof(u32))){ - printk(KERN_DEBUG"aacraid: Could not copy data size from user\n"); + dprintk((KERN_DEBUG"aacraid: Could not copy data size from user\n")); rcode = -EFAULT; goto cleanup; } - if (fibsize > FIB_DATA_SIZE_IN_BYTES) { + if (fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))) { rcode = -EINVAL; goto cleanup; } user_srbcmd = kmalloc(GFP_KERNEL, fibsize); + if (!user_srbcmd) { + dprintk((KERN_DEBUG"aacraid: Could not make a copy of the srb\n")); + rcode = -ENOMEM; + goto cleanup; + } if(copy_from_user(user_srbcmd, user_srb,fibsize)){ - printk(KERN_DEBUG"aacraid: Could not copy srb from user\n"); + dprintk((KERN_DEBUG"aacraid: Could not copy srb from user\n")); rcode = -EFAULT; goto cleanup; } @@ -464,12 +487,12 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) // Fix up srb for endian and force some values srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); // Force this - srbcmd->channel = cpu_to_le32(user_srbcmd->channel); - srbcmd->id = cpu_to_le32(user_srbcmd->id); - srbcmd->lun = cpu_to_le32(user_srbcmd->lun); - srbcmd->flags = cpu_to_le32(user_srbcmd->flags); - srbcmd->timeout = cpu_to_le32(user_srbcmd->timeout); - srbcmd->retry_limit = 0; + srbcmd->channel = cpu_to_le32(user_srbcmd->channel); + srbcmd->id = cpu_to_le32(user_srbcmd->id); + srbcmd->lun = cpu_to_le32(user_srbcmd->lun); + srbcmd->flags = cpu_to_le32(flags); + srbcmd->timeout = cpu_to_le32(user_srbcmd->timeout); + srbcmd->retry_limit =cpu_to_le32(0); // Obsolete parameter srbcmd->cdb_size = cpu_to_le32(user_srbcmd->cdb_size); switch (flags & (SRB_DataIn | SRB_DataOut)) { @@ -485,75 +508,98 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) default: data_dir = DMA_NONE; } + if (le32_to_cpu(srbcmd->sg.count) > (sizeof(sg_list)/sizeof(sg_list[0]))) { + dprintk((KERN_DEBUG"aacraid: too many sg entries %d\n", + le32_to_cpu(srbcmd->sg.count))); + rcode = -EINVAL; + goto cleanup; + } if (dev->dac_support == 1) { struct user_sgmap64* upsg = (struct user_sgmap64*)&user_srbcmd->sg; struct sgmap64* psg = (struct sgmap64*)&user_srbcmd->sg; + struct user_sgmap* usg; byte_count = 0; /* * This should also catch if user used the 32 bit sgmap */ actual_fibsize = sizeof(struct aac_srb) - - sizeof(struct sgentry) + - ((user_srbcmd->sg.count & 0xff) * - sizeof(struct sgentry64)); + sizeof(struct sgentry) + + ((upsg->count & 0xff) * + sizeof(struct sgentry)); if(actual_fibsize != fibsize){ // User made a mistake - should not continue - printk(KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n"); + dprintk((KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n")); rcode = -EINVAL; goto cleanup; } - if ((data_dir == DMA_NONE) && upsg->count) { - printk(KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"); + usg = kmalloc(actual_fibsize - sizeof(struct aac_srb) + + sizeof(struct sgmap), GFP_KERNEL); + if (!usg) { + dprintk((KERN_DEBUG"aacraid: Allocation error in Raw SRB command\n")); + rcode = -ENOMEM; + goto cleanup; + } + memcpy (usg, upsg, actual_fibsize - sizeof(struct aac_srb) + + sizeof(struct sgmap)); + actual_fibsize = sizeof(struct aac_srb) - + sizeof(struct sgentry) + ((usg->count & 0xff) * + sizeof(struct sgentry64)); + if ((data_dir == DMA_NONE) && upsg->count) { + kfree (usg); + dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n")); rcode = -EINVAL; goto cleanup; } - for (i = 0; i < upsg->count; i++) { - u64 addr; + for (i = 0; i < usg->count; i++) { + u64 addr; void* p; - p = kmalloc(upsg->sg[i].count, GFP_KERNEL|__GFP_DMA); + /* Does this really need to be GFP_DMA? */ + p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA); if(p == 0) { - printk(KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", - upsg->sg[i].count,i,upsg->count); + kfree (usg); + dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", + usg->sg[i].count,i,usg->count)); rcode = -ENOMEM; goto cleanup; } - sg_user[i] = (void __user *)upsg->sg[i].addr; + sg_user[i] = (void __user *)usg->sg[i].addr; sg_list[i] = p; // save so we can clean up later sg_indx = i; if( flags & SRB_DataOut ){ if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){ - printk(KERN_DEBUG"aacraid: Could not copy sg data from user\n"); + kfree (usg); + dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); rcode = -EFAULT; goto cleanup; } } - addr = pci_map_single(dev->pdev, p, upsg->sg[i].count, data_dir); + addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir); psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff); - psg->sg[i].addr[1] = cpu_to_le32(addr >> 32); - psg->sg[i].count = cpu_to_le32(upsg->sg[i].count); - byte_count += upsg->sg[i].count; + psg->sg[i].addr[1] = cpu_to_le32(addr>>32); + psg->sg[i].count = cpu_to_le32(usg->sg[i].count); + byte_count += usg->sg[i].count; } + kfree (usg); srbcmd->count = cpu_to_le32(byte_count); + psg->count = cpu_to_le32(sg_indx+1); status = fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL); } else { struct user_sgmap* upsg = &user_srbcmd->sg; struct sgmap* psg = &srbcmd->sg; byte_count = 0; - actual_fibsize = sizeof (struct aac_srb) + - (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) * - sizeof (struct sgentry)); + actual_fibsize = sizeof (struct aac_srb) + (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) * sizeof (struct sgentry)); if(actual_fibsize != fibsize){ // User made a mistake - should not continue - printk(KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n"); + dprintk((KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n")); rcode = -EINVAL; goto cleanup; } if ((data_dir == DMA_NONE) && upsg->count) { - printk(KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"); + dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n")); rcode = -EINVAL; goto cleanup; } @@ -562,44 +608,48 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) void* p; p = kmalloc(upsg->sg[i].count, GFP_KERNEL); if(p == 0) { - printk(KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", - upsg->sg[i].count, i, upsg->count); + dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", + upsg->sg[i].count, i, upsg->count)); rcode = -ENOMEM; goto cleanup; } - sg_user[i] = (void __user *)upsg->sg[i].addr; + sg_user[i] = (void __user *)upsg->sg[i].addr; sg_list[i] = p; // save so we can clean up later sg_indx = i; if( flags & SRB_DataOut ){ - if(copy_from_user(p, sg_user[i], - upsg->sg[i].count)) { - printk(KERN_DEBUG"aacraid: Could not copy sg data from user\n"); + if(copy_from_user(p, sg_user[i], + upsg->sg[i].count)) { + dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); rcode = -EFAULT; goto cleanup; } } - addr = pci_map_single(dev->pdev, p, - upsg->sg[i].count, data_dir); + addr = pci_map_single(dev->pdev, p, + upsg->sg[i].count, data_dir); psg->sg[i].addr = cpu_to_le32(addr); psg->sg[i].count = cpu_to_le32(upsg->sg[i].count); byte_count += upsg->sg[i].count; } srbcmd->count = cpu_to_le32(byte_count); + psg->count = cpu_to_le32(sg_indx+1); status = fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL); } if (status != 0){ - printk(KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n"); + dprintk((KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n")); rcode = -1; goto cleanup; } if( flags & SRB_DataIn ) { for(i = 0 ; i <= sg_indx; i++){ - if(copy_to_user(sg_user[i],sg_list[i],le32_to_cpu(srbcmd->sg.sg[i].count))){ - printk(KERN_DEBUG"aacraid: Could not copy sg data to user\n"); + byte_count = le32_to_cpu((dev->dac_support == 1) + ? ((struct sgmap64*)&srbcmd->sg)->sg[i].count + : srbcmd->sg.sg[i].count); + if(copy_to_user(sg_user[i], sg_list[i], byte_count)){ + dprintk((KERN_DEBUG"aacraid: Could not copy sg data to user\n")); rcode = -EFAULT; goto cleanup; @@ -609,7 +659,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) reply = (struct aac_srb_reply *) fib_data(srbfib); if(copy_to_user(user_reply,reply,sizeof(struct aac_srb_reply))){ - printk(KERN_DEBUG"aacraid: Could not copy reply to user\n"); + dprintk((KERN_DEBUG"aacraid: Could not copy reply to user\n")); rcode = -EFAULT; goto cleanup; } @@ -625,7 +675,6 @@ cleanup: return rcode; } - struct aac_pci_info { u32 bus; u32 slot; @@ -640,11 +689,11 @@ static int aac_get_pci_info(struct aac_dev* dev, void __user *arg) pci_info.slot = PCI_SLOT(dev->pdev->devfn); if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) { - printk(KERN_DEBUG "aacraid: Could not copy pci info\n"); + dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n")); return -EFAULT; } return 0; - } +} int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg) @@ -663,6 +712,7 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg) case FSACTL_MINIPORT_REV_CHECK: status = check_revision(dev, arg); break; + case FSACTL_SEND_LARGE_FIB: case FSACTL_SENDFIB: status = ioctl_send_fib(dev, arg); break; diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 34a4feb1dc0d..43557bf661f6 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "aacraid.h" @@ -49,8 +50,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co { unsigned char *base; unsigned long size, align; - unsigned long fibsize = 4096; - unsigned long printfbufsiz = 256; + const unsigned long fibsize = 4096; + const unsigned long printfbufsiz = 256; struct aac_init *init; dma_addr_t phys; @@ -74,6 +75,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co init = dev->init; init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION); + if (dev->max_fib_size != sizeof(struct hw_fib)) + init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4); init->MiniPortRevision = cpu_to_le32(Sa_MINIPORT_REVISION); init->fsrev = cpu_to_le32(dev->fsrev); @@ -110,6 +113,10 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES); } + init->InitFlags = 0; + init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); + init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); + init->MaxFibSize = cpu_to_le32(dev->max_fib_size); /* * Increment the base address by the amount already used @@ -173,6 +180,8 @@ int aac_send_shutdown(struct aac_dev * dev) int status; fibctx = fib_alloc(dev); + if (!fibctx) + return -ENOMEM; fib_init(fibctx); cmd = (struct aac_close *) fib_data(fibctx); @@ -293,6 +302,79 @@ static int aac_comm_init(struct aac_dev * dev) struct aac_dev *aac_init_adapter(struct aac_dev *dev) { + u32 status[5]; + struct Scsi_Host * host = dev->scsi_host_ptr; + + /* + * Check the preferred comm settings, defaults from template. + */ + dev->max_fib_size = sizeof(struct hw_fib); + dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size + - sizeof(struct aac_fibhdr) + - sizeof(struct aac_write) + sizeof(struct sgmap)) + / sizeof(struct sgmap); + if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS, + 0, 0, 0, 0, 0, 0, + status+0, status+1, status+2, status+3, status+4)) + && (status[0] == 0x00000001)) { + /* + * status[1] >> 16 maximum command size in KB + * status[1] & 0xFFFF maximum FIB size + * status[2] >> 16 maximum SG elements to driver + * status[2] & 0xFFFF maximum SG elements from driver + * status[3] & 0xFFFF maximum number FIBs outstanding + */ + host->max_sectors = (status[1] >> 16) << 1; + dev->max_fib_size = status[1] & 0xFFFF; + host->sg_tablesize = status[2] >> 16; + dev->sg_tablesize = status[2] & 0xFFFF; + host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB; + /* + * NOTE: + * All these overrides are based on a fixed internal + * knowledge and understanding of existing adapters, + * acbsize should be set with caution. + */ + if (acbsize == 512) { + host->max_sectors = AAC_MAX_32BIT_SGBCOUNT; + dev->max_fib_size = 512; + dev->sg_tablesize = host->sg_tablesize + = (512 - sizeof(struct aac_fibhdr) + - sizeof(struct aac_write) + sizeof(struct sgmap)) + / sizeof(struct sgmap); + host->can_queue = AAC_NUM_IO_FIB; + } else if (acbsize == 2048) { + host->max_sectors = 512; + dev->max_fib_size = 2048; + host->sg_tablesize = 65; + dev->sg_tablesize = 81; + host->can_queue = 512 - AAC_NUM_MGT_FIB; + } else if (acbsize == 4096) { + host->max_sectors = 1024; + dev->max_fib_size = 4096; + host->sg_tablesize = 129; + dev->sg_tablesize = 166; + host->can_queue = 256 - AAC_NUM_MGT_FIB; + } else if (acbsize == 8192) { + host->max_sectors = 2048; + dev->max_fib_size = 8192; + host->sg_tablesize = 257; + dev->sg_tablesize = 337; + host->can_queue = 128 - AAC_NUM_MGT_FIB; + } else if (acbsize > 0) { + printk("Illegal acbsize=%d ignored\n", acbsize); + } + } + { + + if (numacb > 0) { + if (numacb < host->can_queue) + host->can_queue = numacb; + else + printk("numacb=%d ignored\n", numacb); + } + } + /* * Ok now init the communication subsystem */ diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index e2720b7be652..5322865942e2 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -25,7 +25,7 @@ * commsup.c * * Abstract: Contain all routines that are required for FSA host/adapter - * commuication. + * communication. * */ @@ -38,6 +38,7 @@ #include #include #include +#include #include #include "aacraid.h" @@ -52,7 +53,13 @@ static int fib_map_alloc(struct aac_dev *dev) { - if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, &dev->hw_fib_pa))==NULL) + dprintk((KERN_INFO + "allocate hardware fibs pci_alloc_consistent(%p, %d * (%d + %d), %p)\n", + dev->pdev, dev->max_fib_size, dev->scsi_host_ptr->can_queue, + AAC_NUM_MGT_FIB, &dev->hw_fib_pa)); + if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, dev->max_fib_size + * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB), + &dev->hw_fib_pa))==NULL) return -ENOMEM; return 0; } @@ -67,7 +74,7 @@ static int fib_map_alloc(struct aac_dev *dev) void fib_map_free(struct aac_dev *dev) { - pci_free_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, dev->hw_fib_va, dev->hw_fib_pa); + pci_free_consistent(dev->pdev, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB), dev->hw_fib_va, dev->hw_fib_pa); } /** @@ -84,17 +91,22 @@ int fib_setup(struct aac_dev * dev) struct hw_fib *hw_fib_va; dma_addr_t hw_fib_pa; int i; - - if(fib_map_alloc(dev)<0) + + while (((i = fib_map_alloc(dev)) == -ENOMEM) + && (dev->scsi_host_ptr->can_queue > (64 - AAC_NUM_MGT_FIB))) { + dev->init->MaxIoCommands = cpu_to_le32((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) >> 1); + dev->scsi_host_ptr->can_queue = le32_to_cpu(dev->init->MaxIoCommands) - AAC_NUM_MGT_FIB; + } + if (i<0) return -ENOMEM; hw_fib_va = dev->hw_fib_va; hw_fib_pa = dev->hw_fib_pa; - memset(hw_fib_va, 0, sizeof(struct hw_fib) * AAC_NUM_FIB); + memset(hw_fib_va, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB)); /* * Initialise the fibs */ - for (i = 0, fibptr = &dev->fibs[i]; i < AAC_NUM_FIB; i++, fibptr++) + for (i = 0, fibptr = &dev->fibs[i]; i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++, fibptr++) { fibptr->dev = dev; fibptr->hw_fib = hw_fib_va; @@ -103,15 +115,15 @@ int fib_setup(struct aac_dev * dev) init_MUTEX_LOCKED(&fibptr->event_wait); spin_lock_init(&fibptr->event_lock); hw_fib_va->header.XferState = cpu_to_le32(0xffffffff); - hw_fib_va->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib)); + hw_fib_va->header.SenderSize = cpu_to_le16(dev->max_fib_size); fibptr->hw_fib_pa = hw_fib_pa; - hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + sizeof(struct hw_fib)); - hw_fib_pa = hw_fib_pa + sizeof(struct hw_fib); + hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + dev->max_fib_size); + hw_fib_pa = hw_fib_pa + dev->max_fib_size; } /* * Add the fib chain to the free list */ - dev->fibs[AAC_NUM_FIB-1].next = NULL; + dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = NULL; /* * Enable this to debug out of queue space */ @@ -124,7 +136,7 @@ int fib_setup(struct aac_dev * dev) * @dev: Adapter to allocate the fib for * * Allocate a fib from the adapter fib pool. If the pool is empty we - * wait for fibs to become free. + * return NULL. */ struct fib * fib_alloc(struct aac_dev *dev) @@ -133,10 +145,10 @@ struct fib * fib_alloc(struct aac_dev *dev) unsigned long flags; spin_lock_irqsave(&dev->fib_lock, flags); fibptr = dev->free_fib; - /* Cannot sleep here or you get hangs. Instead we did the - maths at compile time. */ - if(!fibptr) - BUG(); + if(!fibptr){ + spin_unlock_irqrestore(&dev->fib_lock, flags); + return fibptr; + } dev->free_fib = fibptr->next; spin_unlock_irqrestore(&dev->fib_lock, flags); /* @@ -196,11 +208,11 @@ void fib_init(struct fib *fibptr) struct hw_fib *hw_fib = fibptr->hw_fib; hw_fib->header.StructType = FIB_MAGIC; - hw_fib->header.Size = cpu_to_le16(sizeof(struct hw_fib)); - hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable); + hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size); + hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable); hw_fib->header.SenderFibAddress = cpu_to_le32(fibptr->hw_fib_pa); hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa); - hw_fib->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib)); + hw_fib->header.SenderSize = cpu_to_le16(fibptr->dev->max_fib_size); } /** @@ -279,7 +291,7 @@ static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entr } if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */ - printk(KERN_WARNING "Queue %d full, %d outstanding.\n", + printk(KERN_WARNING "Queue %d full, %u outstanding.\n", qid, q->numpending); return 0; } else { @@ -743,22 +755,25 @@ int fib_complete(struct fib * fibptr) void aac_printf(struct aac_dev *dev, u32 val) { - int length = val & 0xffff; - int level = (val >> 16) & 0xffff; char *cp = dev->printfbuf; - - /* - * The size of the printfbuf is set in port.c - * There is no variable or define for it - */ - if (length > 255) - length = 255; - if (cp[length] != 0) - cp[length] = 0; - if (level == LOG_AAC_HIGH_ERROR) - printk(KERN_WARNING "aacraid:%s", cp); - else - printk(KERN_INFO "aacraid:%s", cp); + if (dev->printf_enabled) + { + int length = val & 0xffff; + int level = (val >> 16) & 0xffff; + + /* + * The size of the printfbuf is set in port.c + * There is no variable or define for it + */ + if (length > 255) + length = 255; + if (cp[length] != 0) + cp[length] = 0; + if (level == LOG_AAC_HIGH_ERROR) + printk(KERN_WARNING "aacraid:%s", cp); + else + printk(KERN_INFO "aacraid:%s", cp); + } memset(cp, 0, 256); } diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 5fd8f3ee9804..6f05d86c7bb3 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -347,10 +347,16 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev, static int aac_slave_configure(struct scsi_device *sdev) { + struct Scsi_Host *host = sdev->host; + if (sdev->tagged_supported) scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, 128); else scsi_adjust_queue_depth(sdev, 0, 1); + + if (host->max_sectors < AAC_MAX_32BIT_SGBCOUNT) + blk_queue_max_segment_size(sdev->request_queue, 65536); + return 0; } @@ -439,11 +445,11 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) static int aac_cfg_open(struct inode *inode, struct file *file) { struct aac_dev *aac; - unsigned minor = iminor(inode); + unsigned minor_number = iminor(inode); int err = -ENODEV; list_for_each_entry(aac, &aac_devices, entry) { - if (aac->id == minor) { + if (aac->id == minor_number) { file->private_data = aac; err = 0; break; @@ -489,6 +495,7 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long case FSACTL_DELETE_DISK: case FSACTL_FORCE_DELETE_DISK: case FSACTL_GET_CONTAINERS: + case FSACTL_SEND_LARGE_FIB: ret = aac_do_ioctl(dev, cmd, (void __user *)arg); break; @@ -538,7 +545,7 @@ static struct file_operations aac_cfg_fops = { static struct scsi_host_template aac_driver_template = { .module = THIS_MODULE, .name = "AAC", - .proc_name = "aacraid", + .proc_name = AAC_DRIVERNAME, .info = aac_info, .ioctl = aac_ioctl, #ifdef CONFIG_COMPAT @@ -612,7 +619,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, aac->cardtype = index; INIT_LIST_HEAD(&aac->entry); - aac->fibs = kmalloc(sizeof(struct fib) * AAC_NUM_FIB, GFP_KERNEL); + aac->fibs = kmalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL); if (!aac->fibs) goto out_free_host; spin_lock_init(&aac->fib_lock); @@ -632,6 +639,24 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, aac_get_adapter_info(aac); /* + * Lets override negotiations and drop the maximum SG limit to 34 + */ + if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) && + (aac->scsi_host_ptr->sg_tablesize > 34)) { + aac->scsi_host_ptr->sg_tablesize = 34; + aac->scsi_host_ptr->max_sectors + = (aac->scsi_host_ptr->sg_tablesize * 8) + 112; + } + + /* + * Firware printf works only with older firmware. + */ + if (aac_drivers[index].quirks & AAC_QUIRK_34SG) + aac->printf_enabled = 1; + else + aac->printf_enabled = 0; + + /* * max channel will be the physical channels plus 1 virtual channel * all containers are on the virtual channel 0 * physical channels are address by their actual physical number+1 diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c index 2d8ecd7f1479..7d68b7825137 100644 --- a/drivers/scsi/aacraid/rkt.c +++ b/drivers/scsi/aacraid/rkt.c @@ -98,7 +98,9 @@ static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs) * for its completion. */ -static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) +static int rkt_sync_cmd(struct aac_dev *dev, u32 command, + u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, + u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4) { unsigned long start; int ok; @@ -107,12 +109,12 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) */ rkt_writel(dev, InboundMailbox0, command); /* - * Write the parameters into Mailboxes 1 - 4 + * Write the parameters into Mailboxes 1 - 6 */ rkt_writel(dev, InboundMailbox1, p1); - rkt_writel(dev, InboundMailbox2, 0); - rkt_writel(dev, InboundMailbox3, 0); - rkt_writel(dev, InboundMailbox4, 0); + rkt_writel(dev, InboundMailbox2, p2); + rkt_writel(dev, InboundMailbox3, p3); + rkt_writel(dev, InboundMailbox4, p4); /* * Clear the synch command doorbell to start on a clean slate. */ @@ -169,6 +171,14 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) */ if (status) *status = rkt_readl(dev, IndexRegs.Mailbox[0]); + if (r1) + *r1 = rkt_readl(dev, IndexRegs.Mailbox[1]); + if (r2) + *r2 = rkt_readl(dev, IndexRegs.Mailbox[2]); + if (r3) + *r3 = rkt_readl(dev, IndexRegs.Mailbox[3]); + if (r4) + *r4 = rkt_readl(dev, IndexRegs.Mailbox[4]); /* * Clear the synch command doorbell. */ @@ -190,8 +200,8 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) static void aac_rkt_interrupt_adapter(struct aac_dev *dev) { - u32 ret; - rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret); + rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); } /** @@ -220,7 +230,8 @@ static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event) rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); break; case HostShutdown: -// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret); +// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, +// NULL, NULL, NULL, NULL, NULL); break; case FastIo: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); @@ -243,16 +254,10 @@ static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event) static void aac_rkt_start_adapter(struct aac_dev *dev) { - u32 status; struct aac_init *init; init = dev->init; init->HostElapsedSeconds = cpu_to_le32(get_seconds()); - /* - * Tell the adapter we are back and up and running so it will scan - * its command queues and enable our interrupts - */ - dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4); /* * First clear out all interrupts. Then enable the one's that we * can handle. @@ -263,7 +268,8 @@ static void aac_rkt_start_adapter(struct aac_dev *dev) rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); // We can only use a 32 bit address here - rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status); + rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, + 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** @@ -310,7 +316,8 @@ static int aac_rkt_check_health(struct aac_dev *dev) post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS); post->Post_Address = cpu_to_le32(baddr); rkt_writel(dev, MUnit.IMRx[0], paddr); - rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status); + rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS), post, paddr); if ((buffer[0] == '0') && (buffer[1] == 'x')) { diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index d447f45f70d1..1ff25f49fada 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -98,7 +98,9 @@ static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs) * for its completion. */ -static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) +static int rx_sync_cmd(struct aac_dev *dev, u32 command, + u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, + u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4) { unsigned long start; int ok; @@ -107,12 +109,12 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) */ rx_writel(dev, InboundMailbox0, command); /* - * Write the parameters into Mailboxes 1 - 4 + * Write the parameters into Mailboxes 1 - 6 */ rx_writel(dev, InboundMailbox1, p1); - rx_writel(dev, InboundMailbox2, 0); - rx_writel(dev, InboundMailbox3, 0); - rx_writel(dev, InboundMailbox4, 0); + rx_writel(dev, InboundMailbox2, p2); + rx_writel(dev, InboundMailbox3, p3); + rx_writel(dev, InboundMailbox4, p4); /* * Clear the synch command doorbell to start on a clean slate. */ @@ -120,7 +122,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) /* * Disable doorbell interrupts */ - rx_writeb(dev, MUnit.OIMR, dev->OIMR |= 0x04); + rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); /* * Force the completion of the mask register write before issuing * the interrupt. @@ -169,6 +171,14 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) */ if (status) *status = rx_readl(dev, IndexRegs.Mailbox[0]); + if (r1) + *r1 = rx_readl(dev, IndexRegs.Mailbox[1]); + if (r2) + *r2 = rx_readl(dev, IndexRegs.Mailbox[2]); + if (r3) + *r3 = rx_readl(dev, IndexRegs.Mailbox[3]); + if (r4) + *r4 = rx_readl(dev, IndexRegs.Mailbox[4]); /* * Clear the synch command doorbell. */ @@ -190,8 +200,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) static void aac_rx_interrupt_adapter(struct aac_dev *dev) { - u32 ret; - rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret); + rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** @@ -220,7 +229,8 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event) rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); break; case HostShutdown: -// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret); +// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, +// NULL, NULL, NULL, NULL, NULL); break; case FastIo: rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); @@ -243,16 +253,10 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event) static void aac_rx_start_adapter(struct aac_dev *dev) { - u32 status; struct aac_init *init; init = dev->init; init->HostElapsedSeconds = cpu_to_le32(get_seconds()); - /* - * Tell the adapter we are back and up and running so it will scan - * its command queues and enable our interrupts - */ - dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4); /* * First clear out all interrupts. Then enable the one's that we * can handle. @@ -263,7 +267,8 @@ static void aac_rx_start_adapter(struct aac_dev *dev) rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); // We can only use a 32 bit address here - rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status); + rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, + 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** @@ -310,7 +315,8 @@ static int aac_rx_check_health(struct aac_dev *dev) post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS); post->Post_Address = cpu_to_le32(baddr); rx_writel(dev, MUnit.IMRx[0], paddr); - rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status); + rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS), post, paddr); if ((buffer[0] == '0') && (buffer[1] == 'x')) { diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index 100c5a0866b4..0680249ab861 100644 --- a/drivers/scsi/aacraid/sa.c +++ b/drivers/scsi/aacraid/sa.c @@ -106,7 +106,10 @@ static void aac_sa_notify_adapter(struct aac_dev *dev, u32 event) sa_writew(dev, DoorbellReg_s,DOORBELL_3); break; case HostShutdown: - //sa_sync_cmd(dev, HOST_CRASHING, 0, &ret); + /* + sa_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); + */ break; case FastIo: sa_writew(dev, DoorbellReg_s,DOORBELL_6); @@ -132,7 +135,9 @@ static void aac_sa_notify_adapter(struct aac_dev *dev, u32 event) * for its completion. */ -static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret) +static int sa_sync_cmd(struct aac_dev *dev, u32 command, + u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, + u32 *ret, u32 *r1, u32 *r2, u32 *r3, u32 *r4) { unsigned long start; int ok; @@ -144,9 +149,10 @@ static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret) * Write the parameters into Mailboxes 1 - 4 */ sa_writel(dev, Mailbox1, p1); - sa_writel(dev, Mailbox2, 0); - sa_writel(dev, Mailbox3, 0); - sa_writel(dev, Mailbox4, 0); + sa_writel(dev, Mailbox2, p2); + sa_writel(dev, Mailbox3, p3); + sa_writel(dev, Mailbox4, p4); + /* * Clear the synch command doorbell to start on a clean slate. */ @@ -188,6 +194,14 @@ static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret) */ if (ret) *ret = sa_readl(dev, Mailbox0); + if (r1) + *r1 = sa_readl(dev, Mailbox1); + if (r2) + *r2 = sa_readl(dev, Mailbox2); + if (r3) + *r3 = sa_readl(dev, Mailbox3); + if (r4) + *r4 = sa_readl(dev, Mailbox4); return 0; } @@ -201,7 +215,8 @@ static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret) static void aac_sa_interrupt_adapter (struct aac_dev *dev) { u32 ret; - sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret); + sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, + &ret, NULL, NULL, NULL, NULL); } /** @@ -233,7 +248,9 @@ static void aac_sa_start_adapter(struct aac_dev *dev) sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff); sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4)); /* We can only use a 32 bit address here */ - sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &ret); + sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, + (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, + &ret, NULL, NULL, NULL, NULL); } /** -- cgit v1.2.3