From 5b5260902af4cf7d2b8da06ba395a722f6d490fa Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 14 Dec 2018 14:16:50 -0800 Subject: alpha: fix hang caused by the bootmem removal The conversion of alpha to memblock as the early memory manager caused boot to hang as described at [1]. The issue is caused because for CONFIG_DISCTONTIGMEM=y case, memblock_add() is called using memory start PFN that had been rounded down to the nearest 8Mb and it caused memblock to see more memory that is actually present in the system. Besides, memblock allocates memory from high addresses while bootmem was using low memory, which broke the assumption that early allocations are always accessible by the hardware. This patch ensures that memblock_add() is using the correct PFN for the memory start and forces memblock to use bottom-up allocations. [1] https://lkml.org/lkml/2018/11/22/1032 Link: http://lkml.kernel.org/r/1543233216-25833-1-git-send-email-rppt@linux.ibm.com Reported-by: Meelis Roos Signed-off-by: Mike Rapoport Tested-by: Meelis Roos Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/setup.c | 1 + arch/alpha/mm/numa.c | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index a37fd990bd55..4b5b1b244f86 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -634,6 +634,7 @@ setup_arch(char **cmdline_p) /* Find our memory. */ setup_memory(kernel_end); + memblock_set_bottom_up(true); /* First guess at cpu cache sizes. Do this before init_arch. */ determine_cpu_caches(cpu->type); diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 74846553e3f1..d0b73371e985 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -144,14 +144,14 @@ setup_memory_node(int nid, void *kernel_end) if (!nid && (node_max_pfn < end_kernel_pfn || node_min_pfn > start_kernel_pfn)) panic("kernel loaded out of ram"); + memblock_add(PFN_PHYS(node_min_pfn), + (node_max_pfn - node_min_pfn) << PAGE_SHIFT); + /* Zone start phys-addr must be 2^(MAX_ORDER-1) aligned. Note that we round this down, not up - node memory has much larger alignment than 8Mb, so it's safe. */ node_min_pfn &= ~((1UL << (MAX_ORDER-1))-1); - memblock_add(PFN_PHYS(node_min_pfn), - (node_max_pfn - node_min_pfn) << PAGE_SHIFT); - NODE_DATA(nid)->node_start_pfn = node_min_pfn; NODE_DATA(nid)->node_present_pages = node_max_pfn - node_min_pfn; -- cgit v1.2.3 From d1402fc708e4c355813e49df6d15bc3466ba5114 Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Fri, 14 Dec 2018 14:16:53 -0800 Subject: mm: introduce common STRUCT_PAGE_MAX_SHIFT define This define is used by arm64 to calculate the size of the vmemmap region. It is defined as the log2 of the upper bound on the size of a struct page. We move it into mm_types.h so it can be defined properly instead of set and checked with a build bug. This also allows us to use the same define for riscv. Link: http://lkml.kernel.org/r/20181107205433.3875-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe Acked-by: Will Deacon Acked-by: Andrew Morton Acked-by: Ard Biesheuvel Acked-by: Catalin Marinas Cc: Arnd Bergmann Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm64/include/asm/memory.h | 9 --------- arch/arm64/mm/init.c | 8 -------- include/asm-generic/fixmap.h | 1 + include/linux/mm_types.h | 5 +++++ 4 files changed, 6 insertions(+), 17 deletions(-) diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index b96442960aea..f0a5c9531e8b 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -34,15 +34,6 @@ */ #define PCI_IO_SIZE SZ_16M -/* - * Log2 of the upper bound of the size of a struct page. Used for sizing - * the vmemmap region only, does not affect actual memory footprint. - * We don't use sizeof(struct page) directly since taking its size here - * requires its definition to be available at this point in the inclusion - * chain, and it may not be a power of 2 in the first place. - */ -#define STRUCT_PAGE_MAX_SHIFT 6 - /* * VMEMMAP_SIZE - allows the whole linear region to be covered by * a struct page array diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 9b432d9fcada..0340e45655c6 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -610,14 +610,6 @@ void __init mem_init(void) BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64); #endif -#ifdef CONFIG_SPARSEMEM_VMEMMAP - /* - * Make sure we chose the upper bound of sizeof(struct page) - * correctly when sizing the VMEMMAP array. - */ - BUILD_BUG_ON(sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT)); -#endif - if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) { extern int sysctl_overcommit_memory; /* diff --git a/include/asm-generic/fixmap.h b/include/asm-generic/fixmap.h index 827e4d3bbc7a..8cc7b09c1bc7 100644 --- a/include/asm-generic/fixmap.h +++ b/include/asm-generic/fixmap.h @@ -16,6 +16,7 @@ #define __ASM_GENERIC_FIXMAP_H #include +#include #define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) #define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 5ed8f6292a53..2c471a2c43fa 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -206,6 +206,11 @@ struct page { #endif } _struct_page_alignment; +/* + * Used for sizing the vmemmap region on some architectures + */ +#define STRUCT_PAGE_MAX_SHIFT (order_base_2(sizeof(struct page))) + #define PAGE_FRAG_CACHE_MAX_SIZE __ALIGN_MASK(32768, ~PAGE_MASK) #define PAGE_FRAG_CACHE_MAX_ORDER get_order(PAGE_FRAG_CACHE_MAX_SIZE) -- cgit v1.2.3 From 9def36e0fa9a0d9c5393c039db59f1f2d3a388b3 Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Fri, 14 Dec 2018 14:16:57 -0800 Subject: mm/sparse: add common helper to mark all memblocks present Presently the arches arm64, arm and sh have a function which loops through each memblock and calls memory present. riscv will require a similar function. Introduce a common memblocks_present() function that can be used by all the arches. Subsequent patches will cleanup the arches that make use of this. Link: http://lkml.kernel.org/r/20181107205433.3875-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe Acked-by: Andrew Morton Cc: Michal Hocko Cc: Vlastimil Babka Cc: Oscar Salvador Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 6 ++++++ mm/sparse.c | 16 ++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 847705a6d0ec..db023a92f3a4 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -783,6 +783,12 @@ void memory_present(int nid, unsigned long start, unsigned long end); static inline void memory_present(int nid, unsigned long start, unsigned long end) {} #endif +#if defined(CONFIG_SPARSEMEM) +void memblocks_present(void); +#else +static inline void memblocks_present(void) {} +#endif + #ifdef CONFIG_HAVE_MEMORYLESS_NODES int local_memory_node(int node_id); #else diff --git a/mm/sparse.c b/mm/sparse.c index 33307fc05c4d..3abc8cc50201 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -239,6 +239,22 @@ void __init memory_present(int nid, unsigned long start, unsigned long end) } } +/* + * Mark all memblocks as present using memory_present(). This is a + * convienence function that is useful for a number of arches + * to mark all of the systems memory as present during initialization. + */ +void __init memblocks_present(void) +{ + struct memblock_region *reg; + + for_each_memblock(memory, reg) { + memory_present(memblock_get_region_node(reg), + memblock_region_memory_base_pfn(reg), + memblock_region_memory_end_pfn(reg)); + } +} + /* * Subtle, we encode the real pfn into the mem_map such that * the identity pfn - section_mem_map will return the actual -- cgit v1.2.3 From 915c9e1b6d008fdaebca91b83fa0d2596121d588 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 14 Dec 2018 14:17:00 -0800 Subject: arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h Most architectures provide prototypes for the PCI I/O mapping operations when asm/io.h is included but SH doesn't currently do that, leading to for example warnings in sound/pci/hda/patch_ca0132.c when pci_iomap() is used on current -next. Make SH more consistent with other architectures by including asm-generic/pci_iomap.h in asm/io.h. Link: http://lkml.kernel.org/r/20181106175142.27988-1-broonie@kernel.org Signed-off-by: Mark Brown Reported-by: kbuild test robot Cc: Geert Uytterhoeven Cc: Yoshinori Sato Cc: Rich Felker Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/asm/io.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 98cb8c802b1a..4f7f235f15f8 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -24,6 +24,7 @@ #define __IO_PREFIX generic #include #include +#include #include #define __raw_writeb(v,a) (__chk_io_ptr(a), *(volatile u8 __force *)(a) = (v)) -- cgit v1.2.3 From 428a1cb4baeb9e5c7feda93af7372ba6d2491558 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Fri, 14 Dec 2018 14:17:03 -0800 Subject: psi: fix reference to kernel commandline enable The kernel commandline parameter named in CONFIG_PSI_DEFAULT_DISABLED help text contradicts the documentation in kernel-parameters.txt, and the code. Fix that. Link: http://lkml.kernel.org/r/20181203213416.GA12627@cmpxchg.org Fixes: e0c274472d ("psi: make disabling/enabling easier for vendor kernels") Signed-off-by: Baruch Siach Acked-by: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- init/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index cf5b5a0dcbc2..ed9352513c32 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -515,8 +515,8 @@ config PSI_DEFAULT_DISABLED depends on PSI help If set, pressure stall information tracking will be disabled - per default but can be enabled through passing psi_enable=1 - on the kernel commandline during boot. + per default but can be enabled through passing psi=1 on the + kernel commandline during boot. endmenu # "CPU/Task time and stats accounting" -- cgit v1.2.3 From f5a222dc2f0e893cc6b0fa34d421a41ca7dfb72e Mon Sep 17 00:00:00 2001 From: Yueyi Li Date: Fri, 14 Dec 2018 14:17:06 -0800 Subject: memblock: annotate memblock_is_reserved() with __init_memblock Found warning: WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned. WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved() The function valid_phys_addr_range() references the function __init memblock_is_reserved(). This is often because valid_phys_addr_range lacks a __init annotation or the annotation of memblock_is_reserved is wrong. Use __init_memblock instead of __init. Link: http://lkml.kernel.org/r/BLUPR13MB02893411BF12EACB61888E80DFAE0@BLUPR13MB0289.namprd13.prod.outlook.com Signed-off-by: Yueyi Li Acked-by: Michal Hocko Reviewed-by: David Hildenbrand Acked-by: Mike Rapoport Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memblock.c b/mm/memblock.c index 9a2d5ae81ae1..81ae63ca78d0 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -1727,7 +1727,7 @@ static int __init_memblock memblock_search(struct memblock_type *type, phys_addr return -1; } -bool __init memblock_is_reserved(phys_addr_t addr) +bool __init_memblock memblock_is_reserved(phys_addr_t addr) { return memblock_search(&memblock.reserved, addr) != -1; } -- cgit v1.2.3 From 8ace22bce84014957da37e6b8baa49ee81c03366 Mon Sep 17 00:00:00 2001 From: Yongkai Wu Date: Fri, 14 Dec 2018 14:17:10 -0800 Subject: hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page() A stack trace was triggered by VM_BUG_ON_PAGE(page_mapcount(page), page) in free_huge_page(). Unfortunately, the page->mapping field was set to NULL before this test. This made it more difficult to determine the root cause of the problem. Move the VM_BUG_ON_PAGE tests earlier in the function so that if they do trigger more information is present in the page struct. Link: http://lkml.kernel.org/r/1543491843-23438-1-git-send-email-nic_w@163.com Signed-off-by: Yongkai Wu Acked-by: Michal Hocko Acked-by: Mike Kravetz Reviewed-by: William Kucharski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 705a3e9cc910..a80832487981 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1248,10 +1248,11 @@ void free_huge_page(struct page *page) (struct hugepage_subpool *)page_private(page); bool restore_reserve; - set_page_private(page, 0); - page->mapping = NULL; VM_BUG_ON_PAGE(page_count(page), page); VM_BUG_ON_PAGE(page_mapcount(page), page); + + set_page_private(page, 0); + page->mapping = NULL; restore_reserve = PagePrivate(page); ClearPagePrivate(page); -- cgit v1.2.3 From 61c6de667263184125d5ca75e894fcad632b0dd3 Mon Sep 17 00:00:00 2001 From: Piotr Jaroszynski Date: Fri, 14 Dec 2018 14:17:14 -0800 Subject: fs/iomap.c: get/put the page in iomap_page_create/release() migrate_page_move_mapping() expects pages with private data set to have a page_count elevated by 1. This is what used to happen for xfs through the buffer_heads code before the switch to iomap in commit 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads"). Not having the count elevated causes move_pages() to fail on memory mapped files coming from xfs. Make iomap compatible with the migrate_page_move_mapping() assumption by elevating the page count as part of iomap_page_create() and lowering it in iomap_page_release(). It causes the move_pages() syscall to misbehave on memory mapped files from xfs. It does not not move any pages, which I suppose is "just" a perf issue, but it also ends up returning a positive number which is out of spec for the syscall. Talking to Michal Hocko, it sounds like returning positive numbers might be a necessary update to move_pages() anyway though (https://lkml.kernel.org/r/20181116114955.GJ14706@dhcp22.suse.cz). I only hit this in tests that verify that move_pages() actually moved the pages. The test also got confused by the positive return from move_pages() (it got treated as a success as positive numbers were not expected and not handled) making it a bit harder to track down what's going on. Link: http://lkml.kernel.org/r/20181115184140.1388751-1-pjaroszynski@nvidia.com Fixes: 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads") Signed-off-by: Piotr Jaroszynski Reviewed-by: Christoph Hellwig Cc: William Kucharski Cc: Darrick J. Wong Cc: Brian Foster Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/iomap.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/iomap.c b/fs/iomap.c index d6bc98ae8d35..5bc172f3dfe8 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -116,6 +116,12 @@ iomap_page_create(struct inode *inode, struct page *page) atomic_set(&iop->read_count, 0); atomic_set(&iop->write_count, 0); bitmap_zero(iop->uptodate, PAGE_SIZE / SECTOR_SIZE); + + /* + * migrate_page_move_mapping() assumes that pages with private data have + * their count elevated by 1. + */ + get_page(page); set_page_private(page, (unsigned long)iop); SetPagePrivate(page); return iop; @@ -132,6 +138,7 @@ iomap_page_release(struct page *page) WARN_ON_ONCE(atomic_read(&iop->write_count)); ClearPagePrivate(page); set_page_private(page, 0); + put_page(page); kfree(iop); } -- cgit v1.2.3 From 01e881f5a1fca4677e82733061868c6d6ea05ca7 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 14 Dec 2018 14:17:17 -0800 Subject: userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered Calling UFFDIO_UNREGISTER on virtual ranges not yet registered in uffd could trigger an harmless false positive WARN_ON. Check the vma is already registered before checking VM_MAYWRITE to shut off the false positive warning. Link: http://lkml.kernel.org/r/20181206212028.18726-2-aarcange@redhat.com Cc: Fixes: 29ec90660d68 ("userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas") Signed-off-by: Andrea Arcangeli Reported-by: syzbot+06c7092e7d71218a2c16@syzkaller.appspotmail.com Acked-by: Mike Rapoport Acked-by: Hugh Dickins Acked-by: Peter Xu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/userfaultfd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index cd58939dc977..7a85e609fc27 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -1566,7 +1566,6 @@ static int userfaultfd_unregister(struct userfaultfd_ctx *ctx, cond_resched(); BUG_ON(!vma_can_userfault(vma)); - WARN_ON(!(vma->vm_flags & VM_MAYWRITE)); /* * Nothing to do: this vma is already registered into this @@ -1575,6 +1574,8 @@ static int userfaultfd_unregister(struct userfaultfd_ctx *ctx, if (!vma->vm_userfaultfd_ctx.ctx) goto skip; + WARN_ON(!(vma->vm_flags & VM_MAYWRITE)); + if (vma->vm_start > start) start = vma->vm_start; vma_end = min(end, vma->vm_end); -- cgit v1.2.3 From f1733a1d3cd32a9492f4cf866be37bb46e10163d Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Fri, 14 Dec 2018 14:17:20 -0800 Subject: checkstack.pl: fix for aarch64 There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pw Signed-off-by: Qian Cai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkstack.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl index 8081b6cf67d2..34414c6efad6 100755 --- a/scripts/checkstack.pl +++ b/scripts/checkstack.pl @@ -47,8 +47,8 @@ my (@stack, $re, $dre, $x, $xs, $funcre); $xs = "[0-9a-f ]"; # hex character or space $funcre = qr/^$x* <(.*)>:$/; if ($arch eq 'aarch64') { - #ffffffc0006325cc: a9bb7bfd stp x29, x30, [sp,#-80]! - $re = qr/^.*stp.*sp,\#-([0-9]{1,8})\]\!/o; + #ffffffc0006325cc: a9bb7bfd stp x29, x30, [sp, #-80]! + $re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o; } elsif ($arch eq 'arm') { #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64 $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o; -- cgit v1.2.3 From 3a6ab5c7dc114057fd67750e308e1745dafc0e6a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 14 Dec 2018 14:17:24 -0800 Subject: scripts/spdxcheck.py: always open files in binary mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The spdxcheck script currently falls over when confronted with a binary file (such as Documentation/logo.gif). To avoid that, always open files in binary mode and decode line-by-line, ignoring encoding errors. One tricky case is when piping data into the script and reading it from standard input. By default, standard input will be opened in text mode, so we need to reopen it in binary mode. The breakage only happens with python3 and results in a UnicodeDecodeError (according to Uwe). Link: http://lkml.kernel.org/r/20181212131210.28024-1-thierry.reding@gmail.com Fixes: 6f4d29df66ac ("scripts/spdxcheck.py: make python3 compliant") Signed-off-by: Thierry Reding Reviewed-by: Jeremy Cline Cc: Thomas Gleixner Cc: Jonathan Corbet Cc: Joe Perches Cc: Uwe Kleine-König Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/spdxcheck.py | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/scripts/spdxcheck.py b/scripts/spdxcheck.py index 5056fb3b897d..e559c6294c39 100755 --- a/scripts/spdxcheck.py +++ b/scripts/spdxcheck.py @@ -168,6 +168,7 @@ class id_parser(object): self.curline = 0 try: for line in fd: + line = line.decode(locale.getpreferredencoding(False), errors='ignore') self.curline += 1 if self.curline > maxlines: break @@ -249,12 +250,13 @@ if __name__ == '__main__': try: if len(args.path) and args.path[0] == '-': - parser.parse_lines(sys.stdin, args.maxlines, '-') + stdin = os.fdopen(sys.stdin.fileno(), 'rb') + parser.parse_lines(stdin, args.maxlines, '-') else: if args.path: for p in args.path: if os.path.isfile(p): - parser.parse_lines(open(p), args.maxlines, p) + parser.parse_lines(open(p, 'rb'), args.maxlines, p) elif os.path.isdir(p): scan_git_subtree(repo.head.reference.commit.tree, p) else: -- cgit v1.2.3