From 2bc61da9f7ff422117a68bef0d309a29affd023a Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Fri, 31 Oct 2014 10:13:50 +0800 Subject: clk: mmp: add pxa910 DT support for clock driver It adds the DT support for pxa910 clock subsystem. Signed-off-by: Chao Xie Acked-by: Haojian Zhuang Signed-off-by: Michael Turquette --- .../devicetree/bindings/clock/marvell,pxa910.txt | 21 ++ drivers/clk/mmp/Makefile | 2 +- drivers/clk/mmp/clk-of-pxa910.c | 301 +++++++++++++++++++++ include/dt-bindings/clock/marvell,pxa910.h | 54 ++++ 4 files changed, 377 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa910.txt create mode 100644 drivers/clk/mmp/clk-of-pxa910.c create mode 100644 include/dt-bindings/clock/marvell,pxa910.h diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa910.txt b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt new file mode 100644 index 000000000000..d9f41f3c03a0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt @@ -0,0 +1,21 @@ +* Marvell PXA910 Clock Controller + +The PXA910 clock subsystem generates and supplies clock to various +controllers within the PXA910 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa910-clock" - controller compatible with PXA910 SoC. + +- reg: physical base address of the clock subsystem and length of memory mapped + region. There are 4 places in SOC has clock control logic: + "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined. + +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in . diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile index 733acc7aa484..947cd74a82a7 100644 --- a/drivers/clk/mmp/Makefile +++ b/drivers/clk/mmp/Makefile @@ -6,7 +6,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o obj-$(CONFIG_RESET_CONTROLLER) += reset.o -obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o +obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c new file mode 100644 index 000000000000..5e3c80dad336 --- /dev/null +++ b/drivers/clk/mmp/clk-of-pxa910.c @@ -0,0 +1,301 @@ +/* + * pxa910 clock framework source file + * + * Copyright (C) 2012 Marvell + * Chao Xie + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "clk.h" +#include "reset.h" + +#define APBC_RTC 0x28 +#define APBC_TWSI0 0x2c +#define APBC_KPC 0x18 +#define APBC_UART0 0x0 +#define APBC_UART1 0x4 +#define APBC_GPIO 0x8 +#define APBC_PWM0 0xc +#define APBC_PWM1 0x10 +#define APBC_PWM2 0x14 +#define APBC_PWM3 0x18 +#define APBC_SSP0 0x1c +#define APBC_SSP1 0x20 +#define APBC_SSP2 0x4c +#define APBCP_TWSI1 0x28 +#define APBCP_UART2 0x1c +#define APMU_SDH0 0x54 +#define APMU_SDH1 0x58 +#define APMU_USB 0x5c +#define APMU_DISP0 0x4c +#define APMU_CCIC0 0x50 +#define APMU_DFC 0x60 +#define MPMU_UART_PLL 0x14 + +struct pxa910_clk_unit { + struct mmp_clk_unit unit; + void __iomem *mpmu_base; + void __iomem *apmu_base; + void __iomem *apbc_base; + void __iomem *apbcp_base; +}; + +static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = { + {PXA910_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768}, + {PXA910_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000}, + {PXA910_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 624000000}, +}; + +static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = { + {PXA910_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0}, + {PXA910_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0}, + {PXA910_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0}, + {PXA910_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0}, + {PXA910_CLK_PLL1_6, "pll1_6", "pll1_2", 1, 3, 0}, + {PXA910_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0}, + {PXA910_CLK_PLL1_24, "pll1_24", "pll1_12", 1, 2, 0}, + {PXA910_CLK_PLL1_48, "pll1_48", "pll1_24", 1, 2, 0}, + {PXA910_CLK_PLL1_96, "pll1_96", "pll1_48", 1, 2, 0}, + {PXA910_CLK_PLL1_13, "pll1_13", "pll1", 1, 13, 0}, + {PXA910_CLK_PLL1_13_1_5, "pll1_13_1_5", "pll1_13", 2, 3, 0}, + {PXA910_CLK_PLL1_2_1_5, "pll1_2_1_5", "pll1_2", 2, 3, 0}, + {PXA910_CLK_PLL1_3_16, "pll1_3_16", "pll1", 3, 16, 0}, +}; + +static struct mmp_clk_factor_masks uart_factor_masks = { + .factor = 2, + .num_mask = 0x1fff, + .den_mask = 0x1fff, + .num_shift = 16, + .den_shift = 0, +}; + +static struct mmp_clk_factor_tbl uart_factor_tbl[] = { + {.num = 8125, .den = 1536}, /*14.745MHZ */ +}; + +static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit) +{ + struct clk *clk; + struct mmp_clk_unit *unit = &pxa_unit->unit; + + mmp_register_fixed_rate_clks(unit, fixed_rate_clks, + ARRAY_SIZE(fixed_rate_clks)); + + mmp_register_fixed_factor_clks(unit, fixed_factor_clks, + ARRAY_SIZE(fixed_factor_clks)); + + clk = mmp_clk_register_factor("uart_pll", "pll1_4", + CLK_SET_RATE_PARENT, + pxa_unit->mpmu_base + MPMU_UART_PLL, + &uart_factor_masks, uart_factor_tbl, + ARRAY_SIZE(uart_factor_tbl), NULL); + mmp_clk_add(unit, PXA910_CLK_UART_PLL, clk); +} + +static DEFINE_SPINLOCK(uart0_lock); +static DEFINE_SPINLOCK(uart1_lock); +static DEFINE_SPINLOCK(uart2_lock); +static const char *uart_parent_names[] = {"pll1_3_16", "uart_pll"}; + +static DEFINE_SPINLOCK(ssp0_lock); +static DEFINE_SPINLOCK(ssp1_lock); +static const char *ssp_parent_names[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"}; + +static DEFINE_SPINLOCK(reset_lock); + +static struct mmp_param_mux_clk apbc_mux_clks[] = { + {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock}, + {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock}, + {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock}, + {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock}, +}; + +static struct mmp_param_mux_clk apbcp_mux_clks[] = { + {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock}, +}; + +static struct mmp_param_gate_clk apbc_gate_clks[] = { + {PXA910_CLK_TWSI0, "twsi0_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x3, 0x3, 0x0, 0, &reset_lock}, + {PXA910_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x3, 0x3, 0x0, 0, &reset_lock}, + {PXA910_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x3, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL}, + {PXA910_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x83, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL}, + {PXA910_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x3, 0x3, 0x0, 0, &reset_lock}, + {PXA910_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x3, 0x3, 0x0, 0, &reset_lock}, + {PXA910_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x3, 0x3, 0x0, 0, &reset_lock}, + {PXA910_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x3, 0x3, 0x0, 0, &reset_lock}, + /* The gate clocks has mux parent. */ + {PXA910_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x3, 0x3, 0x0, 0, &uart0_lock}, + {PXA910_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x3, 0x3, 0x0, 0, &uart1_lock}, + {PXA910_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x3, 0x3, 0x0, 0, &ssp0_lock}, + {PXA910_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x3, 0x3, 0x0, 0, &ssp1_lock}, +}; + +static struct mmp_param_gate_clk apbcp_gate_clks[] = { + {PXA910_CLK_TWSI1, "twsi1_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBCP_TWSI1, 0x3, 0x3, 0x0, 0, &reset_lock}, + /* The gate clocks has mux parent. */ + {PXA910_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x3, 0x3, 0x0, 0, &uart2_lock}, +}; + +static void pxa910_apb_periph_clk_init(struct pxa910_clk_unit *pxa_unit) +{ + struct mmp_clk_unit *unit = &pxa_unit->unit; + + mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base, + ARRAY_SIZE(apbc_mux_clks)); + + mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->apbcp_base, + ARRAY_SIZE(apbcp_mux_clks)); + + mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base, + ARRAY_SIZE(apbc_gate_clks)); + + mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->apbcp_base, + ARRAY_SIZE(apbcp_gate_clks)); +} + +static DEFINE_SPINLOCK(sdh0_lock); +static DEFINE_SPINLOCK(sdh1_lock); +static const char *sdh_parent_names[] = {"pll1_12", "pll1_13"}; + +static DEFINE_SPINLOCK(usb_lock); + +static DEFINE_SPINLOCK(disp0_lock); +static const char *disp_parent_names[] = {"pll1_2", "pll1_12"}; + +static DEFINE_SPINLOCK(ccic0_lock); +static const char *ccic_parent_names[] = {"pll1_2", "pll1_12"}; +static const char *ccic_phy_parent_names[] = {"pll1_6", "pll1_12"}; + +static struct mmp_param_mux_clk apmu_mux_clks[] = { + {0, "sdh0_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH0, 6, 1, 0, &sdh0_lock}, + {0, "sdh1_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH1, 6, 1, 0, &sdh1_lock}, + {0, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 1, 0, &disp0_lock}, + {0, "ccic0_mux", ccic_parent_names, ARRAY_SIZE(ccic_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 6, 1, 0, &ccic0_lock}, + {0, "ccic0_phy_mux", ccic_phy_parent_names, ARRAY_SIZE(ccic_phy_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 7, 1, 0, &ccic0_lock}, +}; + +static struct mmp_param_div_clk apmu_div_clks[] = { + {0, "ccic0_sphy_div", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock}, +}; + +static struct mmp_param_gate_clk apmu_gate_clks[] = { + {PXA910_CLK_DFC, "dfc_clk", "pll1_4", CLK_SET_RATE_PARENT, APMU_DFC, 0x19b, 0x19b, 0x0, 0, NULL}, + {PXA910_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock}, + {PXA910_CLK_SPH, "sph_clk", "usb_pll", 0, APMU_USB, 0x12, 0x12, 0x0, 0, &usb_lock}, + /* The gate clocks has mux parent. */ + {PXA910_CLK_SDH0, "sdh0_clk", "sdh0_mux", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh0_lock}, + {PXA910_CLK_SDH1, "sdh1_clk", "sdh1_mux", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh1_lock}, + {PXA910_CLK_DISP0, "disp0_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock}, + {PXA910_CLK_CCIC0, "ccic0_clk", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock}, + {PXA910_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_phy_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock}, + {PXA910_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock}, +}; + +static void pxa910_axi_periph_clk_init(struct pxa910_clk_unit *pxa_unit) +{ + struct mmp_clk_unit *unit = &pxa_unit->unit; + + mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base, + ARRAY_SIZE(apmu_mux_clks)); + + mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base, + ARRAY_SIZE(apmu_div_clks)); + + mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base, + ARRAY_SIZE(apmu_gate_clks)); +} + +static void pxa910_clk_reset_init(struct device_node *np, + struct pxa910_clk_unit *pxa_unit) +{ + struct mmp_clk_reset_cell *cells; + int i, base, nr_resets_apbc, nr_resets_apbcp, nr_resets; + + nr_resets_apbc = ARRAY_SIZE(apbc_gate_clks); + nr_resets_apbcp = ARRAY_SIZE(apbcp_gate_clks); + nr_resets = nr_resets_apbc + nr_resets_apbcp; + cells = kcalloc(nr_resets, sizeof(*cells), GFP_KERNEL); + if (!cells) + return; + + base = 0; + for (i = 0; i < nr_resets_apbc; i++) { + cells[base + i].clk_id = apbc_gate_clks[i].id; + cells[base + i].reg = + pxa_unit->apbc_base + apbc_gate_clks[i].offset; + cells[base + i].flags = 0; + cells[base + i].lock = apbc_gate_clks[i].lock; + cells[base + i].bits = 0x4; + } + + base = nr_resets_apbc; + for (i = 0; i < nr_resets_apbcp; i++) { + cells[base + i].clk_id = apbcp_gate_clks[i].id; + cells[base + i].reg = + pxa_unit->apbc_base + apbc_gate_clks[i].offset; + cells[base + i].flags = 0; + cells[base + i].lock = apbc_gate_clks[i].lock; + cells[base + i].bits = 0x4; + } + + mmp_clk_reset_register(np, cells, nr_resets); +} + +static void __init pxa910_clk_init(struct device_node *np) +{ + struct pxa910_clk_unit *pxa_unit; + + pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL); + if (!pxa_unit) + return; + + pxa_unit->mpmu_base = of_iomap(np, 0); + if (!pxa_unit->mpmu_base) { + pr_err("failed to map mpmu registers\n"); + return; + } + + pxa_unit->apmu_base = of_iomap(np, 1); + if (!pxa_unit->mpmu_base) { + pr_err("failed to map apmu registers\n"); + return; + } + + pxa_unit->apbc_base = of_iomap(np, 2); + if (!pxa_unit->apbc_base) { + pr_err("failed to map apbc registers\n"); + return; + } + + pxa_unit->apbcp_base = of_iomap(np, 3); + if (!pxa_unit->mpmu_base) { + pr_err("failed to map apbcp registers\n"); + return; + } + + mmp_clk_init(np, &pxa_unit->unit, PXA910_NR_CLKS); + + pxa910_pll_init(pxa_unit); + + pxa910_apb_periph_clk_init(pxa_unit); + + pxa910_axi_periph_clk_init(pxa_unit); + + pxa910_clk_reset_init(np, pxa_unit); +} + +CLK_OF_DECLARE(pxa910_clk, "marvell,pxa910-clock", pxa910_clk_init); diff --git a/include/dt-bindings/clock/marvell,pxa910.h b/include/dt-bindings/clock/marvell,pxa910.h new file mode 100644 index 000000000000..719cffb2bea2 --- /dev/null +++ b/include/dt-bindings/clock/marvell,pxa910.h @@ -0,0 +1,54 @@ +#ifndef __DTS_MARVELL_PXA910_CLOCK_H +#define __DTS_MARVELL_PXA910_CLOCK_H + +/* fixed clocks and plls */ +#define PXA910_CLK_CLK32 1 +#define PXA910_CLK_VCTCXO 2 +#define PXA910_CLK_PLL1 3 +#define PXA910_CLK_PLL1_2 8 +#define PXA910_CLK_PLL1_4 9 +#define PXA910_CLK_PLL1_8 10 +#define PXA910_CLK_PLL1_16 11 +#define PXA910_CLK_PLL1_6 12 +#define PXA910_CLK_PLL1_12 13 +#define PXA910_CLK_PLL1_24 14 +#define PXA910_CLK_PLL1_48 15 +#define PXA910_CLK_PLL1_96 16 +#define PXA910_CLK_PLL1_13 17 +#define PXA910_CLK_PLL1_13_1_5 18 +#define PXA910_CLK_PLL1_2_1_5 19 +#define PXA910_CLK_PLL1_3_16 20 +#define PXA910_CLK_UART_PLL 27 + +/* apb periphrals */ +#define PXA910_CLK_TWSI0 60 +#define PXA910_CLK_TWSI1 61 +#define PXA910_CLK_TWSI2 62 +#define PXA910_CLK_TWSI3 63 +#define PXA910_CLK_GPIO 64 +#define PXA910_CLK_KPC 65 +#define PXA910_CLK_RTC 66 +#define PXA910_CLK_PWM0 67 +#define PXA910_CLK_PWM1 68 +#define PXA910_CLK_PWM2 69 +#define PXA910_CLK_PWM3 70 +#define PXA910_CLK_UART0 71 +#define PXA910_CLK_UART1 72 +#define PXA910_CLK_UART2 73 +#define PXA910_CLK_SSP0 74 +#define PXA910_CLK_SSP1 75 + +/* axi periphrals */ +#define PXA910_CLK_DFC 100 +#define PXA910_CLK_SDH0 101 +#define PXA910_CLK_SDH1 102 +#define PXA910_CLK_SDH2 103 +#define PXA910_CLK_USB 104 +#define PXA910_CLK_SPH 105 +#define PXA910_CLK_DISP0 106 +#define PXA910_CLK_CCIC0 107 +#define PXA910_CLK_CCIC0_PHY 108 +#define PXA910_CLK_CCIC0_SPHY 109 + +#define PXA910_NR_CLKS 200 +#endif -- cgit v1.2.3