From e5f98896efb3b6350cb6f1c241394966dcbcf240 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 18 Jul 2024 21:00:35 +0200 Subject: thermal: trip: Split thermal_zone_device_set_mode() Pull a wrapper around thermal zone .change_mode() callback out of thermal_zone_device_set_mode() because it will be used elsewhere subsequently. No intentional functional impact. Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/2206793.irdbgypaU6@rjwysocki.net --- drivers/thermal/thermal_core.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index f6e700e48aad..48bf267d090d 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -272,6 +272,22 @@ static int __init thermal_register_governors(void) return ret; } +static int __thermal_zone_device_set_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) +{ + if (tz->ops.change_mode) { + int ret; + + ret = tz->ops.change_mode(tz, mode); + if (ret) + return ret; + } + + tz->mode = mode; + + return 0; +} + /* * Zone update section: main control loop applied to each zone while monitoring * in polling mode. The monitoring is done using a workqueue. @@ -540,7 +556,7 @@ monitor: static int thermal_zone_device_set_mode(struct thermal_zone_device *tz, enum thermal_device_mode mode) { - int ret = 0; + int ret; mutex_lock(&tz->lock); @@ -548,14 +564,15 @@ static int thermal_zone_device_set_mode(struct thermal_zone_device *tz, if (mode == tz->mode) { mutex_unlock(&tz->lock); - return ret; + return 0; } - if (tz->ops.change_mode) - ret = tz->ops.change_mode(tz, mode); + ret = __thermal_zone_device_set_mode(tz, mode); + if (ret) { + mutex_unlock(&tz->lock); - if (!ret) - tz->mode = mode; + return ret; + } __thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); @@ -566,7 +583,7 @@ static int thermal_zone_device_set_mode(struct thermal_zone_device *tz, else thermal_notify_tz_disable(tz); - return ret; + return 0; } int thermal_zone_device_enable(struct thermal_zone_device *tz) -- cgit v1.2.3 From f7c1b0e4ae47e67c6f9af84568a5f4a80638ccd8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 18 Jul 2024 21:01:14 +0200 Subject: thermal: core: Back off when polling thermal zones on errors Commit a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") introduced a polling mechanism by which the thermal core attampts to get a valid temperature value for thermal zones where the .get_temp() callback returns errors to start with (for example, due to initialization ordering woes). However, this polling is carried out periodically ad infinitum and every iteration of it causes a message to be printed to the kernel log which means a lot of log noise on systems where there are thermal zones that never get ready for some reason. It is also not really useful to continuously poll thermal zones that never respond. To address this, modify the thermal core to increase the delay between consecutive thermal zone temperature checks after every check that fails until it reaches a certain maximum value. At that point, the thermal zone in question will be disabled, but user space will be able to reenable it if it believes that the failure is transient. Also change the code to print messages regarding failed temperature checks to the kernel log only twice, once when the thermal zone's .get_temp() callback returns an error for the first time and once when disabling the given thermal zone. In addition, a dev_crit() message will be printed at that point if the given thermal zone contains a critical trip point to notify the system operator about the situation. Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid") Link: https://lore.kernel.org/linux-acpi/CAGnHSE=RyPK++UG0-wAtVKgeJxe0uzFYgLxm+RUOKKoQquW=Ow@mail.gmail.com/ Reported-by: Tom Yan Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/2962033.e9J7NaK4W3@rjwysocki.net --- drivers/thermal/thermal_core.c | 58 +++++++++++++++++++++++++++++++++++++++--- drivers/thermal/thermal_core.h | 10 +++++--- 2 files changed, 61 insertions(+), 7 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 48bf267d090d..95c399f94744 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -288,6 +288,28 @@ static int __thermal_zone_device_set_mode(struct thermal_zone_device *tz, return 0; } +static void thermal_zone_broken_disable(struct thermal_zone_device *tz) +{ + struct thermal_trip_desc *td; + + dev_err(&tz->device, "Unable to get temperature, disabling!\n"); + /* + * This function only runs for enabled thermal zones, so no need to + * check for the current mode. + */ + __thermal_zone_device_set_mode(tz, THERMAL_DEVICE_DISABLED); + thermal_notify_tz_disable(tz); + + for_each_trip_desc(tz, td) { + if (td->trip.type == THERMAL_TRIP_CRITICAL && + td->trip.temperature > THERMAL_TEMP_INVALID) { + dev_crit(&tz->device, + "Disabled thermal zone with critical trip point\n"); + return; + } + } +} + /* * Zone update section: main control loop applied to each zone while monitoring * in polling mode. The monitoring is done using a workqueue. @@ -308,6 +330,34 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, cancel_delayed_work(&tz->poll_queue); } +static void thermal_zone_recheck(struct thermal_zone_device *tz, int error) +{ + if (error == -EAGAIN) { + thermal_zone_device_set_polling(tz, THERMAL_RECHECK_DELAY); + return; + } + + /* + * Print the message once to reduce log noise. It will be followed by + * another one if the temperature cannot be determined after multiple + * attempts. + */ + if (tz->recheck_delay_jiffies == THERMAL_RECHECK_DELAY) + dev_info(&tz->device, "Temperature check failed (%d)\n", error); + + thermal_zone_device_set_polling(tz, tz->recheck_delay_jiffies); + + tz->recheck_delay_jiffies += max(tz->recheck_delay_jiffies >> 1, 1ULL); + if (tz->recheck_delay_jiffies > THERMAL_MAX_RECHECK_DELAY) { + thermal_zone_broken_disable(tz); + /* + * Restore the original recheck delay value to allow the thermal + * zone to try to recover when it is reenabled by user space. + */ + tz->recheck_delay_jiffies = THERMAL_RECHECK_DELAY; + } +} + static void monitor_thermal_zone(struct thermal_zone_device *tz) { if (tz->mode != THERMAL_DEVICE_ENABLED) @@ -507,10 +557,7 @@ void __thermal_zone_device_update(struct thermal_zone_device *tz, ret = __thermal_zone_get_temp(tz, &temp); if (ret) { - if (ret != -EAGAIN) - dev_info(&tz->device, "Temperature check failed (%d)\n", ret); - - thermal_zone_device_set_polling(tz, msecs_to_jiffies(THERMAL_RECHECK_DELAY_MS)); + thermal_zone_recheck(tz, ret); return; } else if (temp <= THERMAL_TEMP_INVALID) { /* @@ -522,6 +569,8 @@ void __thermal_zone_device_update(struct thermal_zone_device *tz, goto monitor; } + tz->recheck_delay_jiffies = THERMAL_RECHECK_DELAY; + tz->last_temperature = tz->temperature; tz->temperature = temp; @@ -1462,6 +1511,7 @@ thermal_zone_device_register_with_trips(const char *type, thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay); thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay); + tz->recheck_delay_jiffies = THERMAL_RECHECK_DELAY; /* sys I/F */ /* Add nodes that are always present via .groups */ diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index ba8e6fc807ca..4cf2b7230d04 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -67,6 +67,8 @@ struct thermal_governor { * @polling_delay_jiffies: number of jiffies to wait between polls when * checking whether trip points have been crossed (0 for * interrupt driven systems) + * @recheck_delay_jiffies: delay after a failed attempt to determine the zone + * temperature before trying again * @temperature: current temperature. This is only for core code, * drivers should use thermal_zone_get_temp() to get the * current temperature @@ -108,6 +110,7 @@ struct thermal_zone_device { int num_trips; unsigned long passive_delay_jiffies; unsigned long polling_delay_jiffies; + unsigned long recheck_delay_jiffies; int temperature; int last_temperature; int emul_temperature; @@ -137,10 +140,11 @@ struct thermal_zone_device { #define THERMAL_TEMP_INIT INT_MIN /* - * Default delay after a failing thermal zone temperature check before - * attempting to check it again. + * Default and maximum delay after a failed thermal zone temperature check + * before attempting to check it again (in jiffies). */ -#define THERMAL_RECHECK_DELAY_MS 250 +#define THERMAL_RECHECK_DELAY msecs_to_jiffies(250) +#define THERMAL_MAX_RECHECK_DELAY (120 * HZ) /* Default Thermal Governor */ #if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE) -- cgit v1.2.3