From 0fc6f44d9683c61678da4b0eebc89e8fa624de39 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 6 Jun 2015 21:41:09 +0100 Subject: drm/i2c: tda998x: re-implement "Fix EDID read timeout on HDMI connect" Commit 6833d26ef823 ("drm: tda998x: Fix EDID read timeout on HDMI connect") used a weak scheme to try and delay reading EDID on a HDMI connect event. It is weak because delaying the notification of a hotplug event does not stop userspace from trying to read the EDID within the 100ms delay. The solution provided here solves this issue: * When a HDMI connection event is detected, mark a blocking flag for EDID reads, and start a timer for the delay. * If an EDID read is attempted, and the blocking flag is set, wait for the blocking flag to clear. * When the timer expires, clear the blocking flag and wake any thread waiting for the EDID read. Signed-off-by: Russell King --- drivers/gpu/drm/i2c/tda998x_drv.c | 80 +++++++++++++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index ad3ce3479edf..a53696fd8938 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -34,7 +34,6 @@ struct tda998x_priv { struct i2c_client *cec; struct i2c_client *hdmi; struct mutex mutex; - struct delayed_work dwork; uint16_t rev; uint8_t current_page; int dpms; @@ -47,6 +46,11 @@ struct tda998x_priv { wait_queue_head_t wq_edid; volatile int wq_edid_wait; struct drm_encoder *encoder; + + struct work_struct detect_work; + struct timer_list edid_delay_timer; + wait_queue_head_t edid_delay_waitq; + bool edid_delay_active; }; #define to_tda998x_priv(x) ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv) @@ -551,15 +555,50 @@ tda998x_reset(struct tda998x_priv *priv) reg_write(priv, REG_MUX_VP_VIP_OUT, 0x24); } -/* handle HDMI connect/disconnect */ -static void tda998x_hpd(struct work_struct *work) +/* + * The TDA998x has a problem when trying to read the EDID close to a + * HPD assertion: it needs a delay of 100ms to avoid timing out while + * trying to read EDID data. + * + * However, tda998x_encoder_get_modes() may be called at any moment + * after tda998x_encoder_detect() indicates that we are connected, so + * we need to delay probing modes in tda998x_encoder_get_modes() after + * we have seen a HPD inactive->active transition. This code implements + * that delay. + */ +static void tda998x_edid_delay_done(unsigned long data) +{ + struct tda998x_priv *priv = (struct tda998x_priv *)data; + + priv->edid_delay_active = false; + wake_up(&priv->edid_delay_waitq); + schedule_work(&priv->detect_work); +} + +static void tda998x_edid_delay_start(struct tda998x_priv *priv) +{ + priv->edid_delay_active = true; + mod_timer(&priv->edid_delay_timer, jiffies + HZ/10); +} + +static int tda998x_edid_delay_wait(struct tda998x_priv *priv) +{ + return wait_event_killable(priv->edid_delay_waitq, !priv->edid_delay_active); +} + +/* + * We need to run the KMS hotplug event helper outside of our threaded + * interrupt routine as this can call back into our get_modes method, + * which will want to make use of interrupts. + */ +static void tda998x_detect_work(struct work_struct *work) { - struct delayed_work *dwork = to_delayed_work(work); struct tda998x_priv *priv = - container_of(dwork, struct tda998x_priv, dwork); + container_of(work, struct tda998x_priv, detect_work); + struct drm_device *dev = priv->encoder->dev; - if (priv->encoder->dev) - drm_kms_helper_hotplug_event(priv->encoder->dev); + if (dev) + drm_kms_helper_hotplug_event(dev); } /* @@ -585,7 +624,11 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data) wake_up(&priv->wq_edid); handled = true; } else if (cec != 0) { /* HPD change */ - schedule_delayed_work(&priv->dwork, HZ/10); + if (lvl & CEC_RXSHPDLEV_HPD) + tda998x_edid_delay_start(priv); + else + schedule_work(&priv->detect_work); + handled = true; } return IRQ_RETVAL(handled); @@ -1103,6 +1146,14 @@ tda998x_encoder_get_modes(struct tda998x_priv *priv, struct edid *edid; int n; + /* + * If we get killed while waiting for the HPD timeout, return + * no modes found: we are not in a restartable path, so we + * can't handle signals gracefully. + */ + if (tda998x_edid_delay_wait(priv)) + return 0; + if (priv->rev == TDA19988) reg_clear(priv, REG_TX4, TX4_PD_RAM); @@ -1149,10 +1200,12 @@ static void tda998x_destroy(struct tda998x_priv *priv) /* disable all IRQs and free the IRQ handler */ cec_write(priv, REG_CEC_RXSHPDINTENA, 0); reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); - if (priv->hdmi->irq) { + + if (priv->hdmi->irq) free_irq(priv->hdmi->irq, priv); - cancel_delayed_work_sync(&priv->dwork); - } + + del_timer_sync(&priv->edid_delay_timer); + cancel_work_sync(&priv->detect_work); i2c_unregister_device(priv->cec); } @@ -1253,6 +1306,10 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) priv->dpms = DRM_MODE_DPMS_OFF; mutex_init(&priv->mutex); /* protect the page access */ + init_waitqueue_head(&priv->edid_delay_waitq); + setup_timer(&priv->edid_delay_timer, tda998x_edid_delay_done, + (unsigned long)priv); + INIT_WORK(&priv->detect_work, tda998x_detect_work); /* wake up the device: */ cec_write(priv, REG_CEC_ENAMODS, @@ -1311,7 +1368,6 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) /* init read EDID waitqueue and HDP work */ init_waitqueue_head(&priv->wq_edid); - INIT_DELAYED_WORK(&priv->dwork, tda998x_hpd); /* clear pending interrupts */ reg_read(priv, REG_INT_FLAGS_0); -- cgit v1.2.3