From 963a1852fbac4f75a2d938fa2e734ef1e6d4c044 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 21 Feb 2014 20:34:34 +0100 Subject: mac80211: don't validate unchanged AP bandwidth while tracking The MLME code in mac80211 must track whether or not the AP changed bandwidth, but if there's no change while tracking it shouldn't do anything, otherwise regulatory updates can make it impossible to connect to certain APs if the regulatory database doesn't match the information from the AP. See the precise scenario described in the code. This still leaves some possible problems with CSA or if the AP actually changed bandwidth, but those cases are less common and won't completely prevent using it. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=70881 Cc: stable@vger.kernel.org Reported-and-tested-by: Nate Carlson Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 57d5482b10fa..c415f00cd6b6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -271,6 +271,28 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, ret = 0; out: + /* + * When tracking the current AP, don't do any further checks if the + * new chandef is identical to the one we're currently using for the + * connection. This keeps us from playing ping-pong with regulatory, + * without it the following can happen (for example): + * - connect to an AP with 80 MHz, world regdom allows 80 MHz + * - AP advertises regdom US + * - CRDA loads regdom US with 80 MHz prohibited (old database) + * - the code below detects an unsupported channel, downgrades, and + * we disconnect from the AP in the caller + * - disconnect causes CRDA to reload world regdomain and the game + * starts anew. + * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) + * + * It seems possible that there are still scenarios with CSA or real + * bandwidth changes where a this could happen, but those cases are + * less common and wouldn't completely prevent using the AP. + */ + if (tracking && + cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) + return ret; + /* don't print the message below for VHT mismatch if VHT is disabled */ if (ret & IEEE80211_STA_DISABLE_VHT) vht_chandef = *chandef; -- cgit v1.2.3 From 092008abeed1e4168c08826262695ea67657e1aa Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Fri, 14 Feb 2014 08:54:00 +0100 Subject: cfg80211: regulatory: reset regdomain in case of error Reset regdomain to world regdomain in case of errors in set_regdom() function. This will fix a problem with such scenario: - iw reg set US - iw reg set 00 - iw reg set US The last step always fail and we get deadlock in kernel regulatory code. Next setting new regulatory wasn't possible due to: Pending regulatory request, waiting for it to be processed... Signed-off-by: Janusz Dziedzic Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 4c50c21d6f52..f0541370e68e 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2373,6 +2373,7 @@ static int reg_set_rd_country_ie(const struct ieee80211_regdomain *rd, int set_regdom(const struct ieee80211_regdomain *rd) { struct regulatory_request *lr; + bool user_reset = false; int r; if (!reg_is_valid_request(rd->alpha2)) { @@ -2389,6 +2390,7 @@ int set_regdom(const struct ieee80211_regdomain *rd) break; case NL80211_REGDOM_SET_BY_USER: r = reg_set_rd_user(rd, lr); + user_reset = true; break; case NL80211_REGDOM_SET_BY_DRIVER: r = reg_set_rd_driver(rd, lr); @@ -2402,8 +2404,14 @@ int set_regdom(const struct ieee80211_regdomain *rd) } if (r) { - if (r == -EALREADY) + switch (r) { + case -EALREADY: reg_set_request_processed(); + break; + default: + /* Back to world regulatory in case of errors */ + restore_regulatory_settings(user_reset); + } kfree(rd); return r; -- cgit v1.2.3 From e7eb65cac0720df8b3946af7f7a9dc363cf0a814 Mon Sep 17 00:00:00 2001 From: Max Stepanov Date: Sun, 16 Feb 2014 16:36:57 +0200 Subject: iwlwifi: mvm: change of listen interval from 70 to 10 Some APs reject STA association request if a listen interval value exceeds a threshold of 10. Thus, for example, Cisco APs may deny STA associations returning status code 12 (Association denied due to reason outside the scope of 802.11 standard) in the association response frame. Fixing the issue by setting the default IWL_CONN_MAX_LISTEN_INTERVAL value from 70 to 10. Cc: [3.10+] Signed-off-by: Max Stepanov Reviewed-by: Alexander Bondar Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index e4ead86f06d6..2b0ba1fc3c82 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -152,7 +152,7 @@ enum iwl_power_scheme { IWL_POWER_SCHEME_LP }; -#define IWL_CONN_MAX_LISTEN_INTERVAL 70 +#define IWL_CONN_MAX_LISTEN_INTERVAL 10 #define IWL_UAPSD_AC_INFO (IEEE80211_WMM_IE_STA_QOSINFO_AC_VO |\ IEEE80211_WMM_IE_STA_QOSINFO_AC_VI |\ IEEE80211_WMM_IE_STA_QOSINFO_AC_BK |\ -- cgit v1.2.3 From 143582c6847cb285b361804c613127c25de60ca4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 25 Feb 2014 10:37:15 +0100 Subject: iwlwifi: fix TX status for aggregated packets Only the first packet is currently handled correctly, but then all others are assumed to have failed which is problematic. Fix this, marking them all successful instead (since if they're not then the firmware will have transmitted them as single frames.) This fixes the lost packet reporting. Also do a tiny variable scoping cleanup. Cc: Signed-off-by: Johannes Berg [Add the dvm part] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/dvm/tx.c | 14 +++++++++----- drivers/net/wireless/iwlwifi/mvm/tx.c | 18 +++++++++--------- 2 files changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index a6839dfcb82d..398dd096674c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1291,8 +1291,6 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, struct iwl_compressed_ba_resp *ba_resp = (void *)pkt->data; struct iwl_ht_agg *agg; struct sk_buff_head reclaimed_skbs; - struct ieee80211_tx_info *info; - struct ieee80211_hdr *hdr; struct sk_buff *skb; int sta_id; int tid; @@ -1379,22 +1377,28 @@ int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, freed = 0; skb_queue_walk(&reclaimed_skbs, skb) { - hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_hdr *hdr = (void *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (ieee80211_is_data_qos(hdr->frame_control)) freed++; else WARN_ON_ONCE(1); - info = IEEE80211_SKB_CB(skb); iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); + memset(&info->status, 0, sizeof(info->status)); + /* Packet was transmitted successfully, failures come as single + * frames because before failing a frame the firmware transmits + * it without aggregation at least once. + */ + info->flags |= IEEE80211_TX_STAT_ACK; + if (freed == 1) { /* this is the first skb we deliver in this batch */ /* put the rate scaling data there */ info = IEEE80211_SKB_CB(skb); memset(&info->status, 0, sizeof(info->status)); - info->flags |= IEEE80211_TX_STAT_ACK; info->flags |= IEEE80211_TX_STAT_AMPDU; info->status.ampdu_ack_len = ba_resp->txed_2_done; info->status.ampdu_len = ba_resp->txed; diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 4df12fa9d336..76ee486039d7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -822,16 +822,12 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, struct iwl_mvm_ba_notif *ba_notif = (void *)pkt->data; struct sk_buff_head reclaimed_skbs; struct iwl_mvm_tid_data *tid_data; - struct ieee80211_tx_info *info; struct ieee80211_sta *sta; struct iwl_mvm_sta *mvmsta; - struct ieee80211_hdr *hdr; struct sk_buff *skb; int sta_id, tid, freed; - /* "flow" corresponds to Tx queue */ u16 scd_flow = le16_to_cpu(ba_notif->scd_flow); - /* "ssn" is start of block-ack Tx window, corresponds to index * (in Tx queue's circular buffer) of first TFD/frame in window */ u16 ba_resp_scd_ssn = le16_to_cpu(ba_notif->scd_ssn); @@ -888,22 +884,26 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, freed = 0; skb_queue_walk(&reclaimed_skbs, skb) { - hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_hdr *hdr = (void *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); if (ieee80211_is_data_qos(hdr->frame_control)) freed++; else WARN_ON_ONCE(1); - info = IEEE80211_SKB_CB(skb); iwl_trans_free_tx_cmd(mvm->trans, info->driver_data[1]); + memset(&info->status, 0, sizeof(info->status)); + /* Packet was transmitted successfully, failures come as single + * frames because before failing a frame the firmware transmits + * it without aggregation at least once. + */ + info->flags |= IEEE80211_TX_STAT_ACK; + if (freed == 1) { /* this is the first skb we deliver in this batch */ /* put the rate scaling data there */ - info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); - info->flags |= IEEE80211_TX_STAT_ACK; info->flags |= IEEE80211_TX_STAT_AMPDU; info->status.ampdu_ack_len = ba_notif->txed_2_done; info->status.ampdu_len = ba_notif->txed; -- cgit v1.2.3 From cb664981607a6b5b3d670ad57bbda893b2528d96 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Feb 2014 20:47:53 +0100 Subject: mac80211: fix association to 20/40 MHz VHT networks When a VHT network uses 20 or 40 MHz as per the HT operation information, the channel center frequency segment 0 field in the VHT operation information is reserved, so ignore it. This fixes association with such networks when the AP puts 0 into the field, previously we'd disconnect due to an invalid channel with the message wlan0: AP VHT information is invalid, disable VHT Cc: stable@vger.kernel.org Fixes: f2d9d270c15ae ("mac80211: support VHT association") Reported-by: Tim Nelson Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c415f00cd6b6..245dce969b31 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -222,6 +222,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, switch (vht_oper->chan_width) { case IEEE80211_VHT_CHANWIDTH_USE_HT: vht_chandef.width = chandef->width; + vht_chandef.center_freq1 = chandef->center_freq1; break; case IEEE80211_VHT_CHANWIDTH_80MHZ: vht_chandef.width = NL80211_CHAN_WIDTH_80; -- cgit v1.2.3 From adb07df1e039e9fe43e66aeea8b4771f83659dbb Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Wed, 26 Feb 2014 20:11:22 -0800 Subject: mwifiex: do not advertise usb autosuspend support As many Surface Pro I & II users have found out, the mwifiex_usb doesn't support usb autosuspend, and it has caused some system stability issues. Bug 69661 - mwifiex_usb on MS Surface Pro 1 is unstable Bug 60815 - Interface hangs in mwifiex_usb Bug 64111 - mwifiex_usb USB8797 crash failed to get signal information USB autosuspend get triggered when Surface Pro's AC power is removed or powertop enables power saving on USB8797 device. Driver's suspend handler is called here, but resume handler won't be called until the AC power is put back on or powertop disables power saving for USB8797. We need to refactor the suspend/resume handlers to support usb autosuspend properly. For now let's just remove it. Cc: # 3.5+ Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/usb.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index cb6b70a1b34d..208748804a55 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -525,13 +525,6 @@ static int mwifiex_usb_resume(struct usb_interface *intf) MWIFIEX_BSS_ROLE_ANY), MWIFIEX_ASYNC_CMD); -#ifdef CONFIG_PM - /* Resume handler may be called due to remote wakeup, - * force to exit suspend anyway - */ - usb_disable_autosuspend(card->udev); -#endif /* CONFIG_PM */ - return 0; } @@ -571,7 +564,6 @@ static struct usb_driver mwifiex_usb_driver = { .id_table = mwifiex_usb_table, .suspend = mwifiex_usb_suspend, .resume = mwifiex_usb_resume, - .supports_autosuspend = 1, }; static int mwifiex_usb_tx_init(struct mwifiex_adapter *adapter) -- cgit v1.2.3