From 660d9a9c4f623eeec80cec3705ae872bd5cb556d Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 30 Jul 2012 15:03:02 +0800 Subject: mmc: bfin_sdh: fix dma_desc_array build error Descriptor array structure has been moved into blackfin dma.h head file. This patch fix below error: drivers/mmc/host/bfin_sdh.c:52:8: error: redefinition of 'struct dma_desc_array' make[4]: *** [drivers/mmc/host/bfin_sdh.o] Error 1 Signed-off-by: Sonic Zhang Signed-off-by: Bob Liu Signed-off-by: Chris Ball --- drivers/mmc/host/bfin_sdh.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index 03666174ca48..a17dd7363ceb 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -49,13 +49,6 @@ #define bfin_write_SDH_CFG bfin_write_RSI_CFG #endif -struct dma_desc_array { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; -} __packed; - struct sdh_host { struct mmc_host *mmc; spinlock_t lock; -- cgit v1.2.3 From 1af36b2a993dddfa3d6860ec4879c9e8abc9b976 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Tue, 17 Jul 2012 17:16:09 +0300 Subject: mmc: mxs-mmc: fix deadlock in SDIO IRQ case Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_irq_handler. Backtrace: [ 79.660000] ============================================= [ 79.660000] [ INFO: possible recursive locking detected ] [ 79.660000] 3.4.0-00009-g3e96082-dirty #11 Not tainted [ 79.660000] --------------------------------------------- [ 79.660000] swapper/0 is trying to acquire lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xd4 [ 79.660000] [ 79.660000] but task is already holding lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] other info that might help us debug this: [ 79.660000] Possible unsafe locking scenario: [ 79.660000] [ 79.660000] CPU0 [ 79.660000] ---- [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] [ 79.660000] *** DEADLOCK *** [ 79.660000] [ 79.660000] May be due to missing lock nesting notation [ 79.660000] [ 79.660000] 1 lock held by swapper/0: [ 79.660000] #0: (&(&host->lock)->rlock#2){-.....}, at: [] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] stack backtrace: [ 79.660000] [] (unwind_backtrace+0x0/0xf4) from [] (__lock_acquire+0x1948/0x1d48) [ 79.660000] [] (__lock_acquire+0x1948/0x1d48) from [] (lock_acquire+0xe0/0xf8) [ 79.660000] [] (lock_acquire+0xe0/0xf8) from [] (_raw_spin_lock_irqsave+0x44/0x58) [ 79.660000] [] (_raw_spin_lock_irqsave+0x44/0x58) from [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [] (mxs_mmc_irq_handler+0xd4/0xe8) from [] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [] (handle_irq_event_percpu+0x70/0x254) from [] (handle_irq_event+0x3c/0x5c) [ 79.660000] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0x90/0x110) [ 79.660000] [] (handle_level_irq+0x90/0x110) from [] (generic_handle_irq+0x38/0x50) [ 79.660000] [] (generic_handle_irq+0x38/0x50) from [] (handle_IRQ+0x30/0x84) [ 79.660000] [] (handle_IRQ+0x30/0x84) from [] (__irq_svc+0x38/0x60) [ 79.660000] [] (__irq_svc+0x38/0x60) from [] (default_idle+0x2c/0x40) [ 79.660000] [] (default_idle+0x2c/0x40) from [] (cpu_idle+0x64/0xcc) [ 79.660000] [] (cpu_idle+0x64/0xcc) from [] (start_kernel+0x244/0x2c8) [ 79.660000] BUG: spinlock lockup on CPU#0, swapper/0 [ 79.660000] lock: c398cb2c, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 [ 79.660000] [] (unwind_backtrace+0x0/0xf4) from [] (do_raw_spin_lock+0xf0/0x144) [ 79.660000] [] (do_raw_spin_lock+0xf0/0x144) from [] (_raw_spin_lock_irqsave+0x4c/0x58) [ 79.660000] [] (_raw_spin_lock_irqsave+0x4c/0x58) from [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [] (mxs_mmc_irq_handler+0xd4/0xe8) from [] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [] (handle_irq_event_percpu+0x70/0x254) from [] (handle_irq_event+0x3c/0x5c) [ 79.660000] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0x90/0x110) [ 79.660000] [] (handle_level_irq+0x90/0x110) from [] (generic_handle_irq+0x38/0x50) [ 79.660000] [] (generic_handle_irq+0x38/0x50) from [] (handle_IRQ+0x30/0x84) [ 79.660000] [] (handle_IRQ+0x30/0x84) from [] (__irq_svc+0x38/0x60) [ 79.660000] [] (__irq_svc+0x38/0x60) from [] (default_idle+0x2c/0x40) [ 79.660000] [] (default_idle+0x2c/0x40) from [] (cpu_idle+0x64/0xcc) [ 79.660000] [] (cpu_idle+0x64/0xcc) from [] (start_kernel+0x244/0x2c8) Signed-off-by: Lauri Hintsala Acked-by: Shawn Guo Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/host/mxs-mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index a51f9309ffbb..e62e58e5053d 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -285,11 +285,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) writel(stat & MXS_MMC_IRQ_BITS, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR); + spin_unlock(&host->lock); + if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN)) mmc_signal_sdio_irq(host->mmc); - spin_unlock(&host->lock); - if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ) cmd->error = -ETIMEDOUT; else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ) -- cgit v1.2.3 From fc108d24d3a6da63576a460e122fa1df0cbdea20 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Tue, 17 Jul 2012 17:16:10 +0300 Subject: mmc: mxs-mmc: fix deadlock caused by recursion loop Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_enable_sdio_irq. Backtrace: [ 65.470000] ============================================= [ 65.470000] [ INFO: possible recursive locking detected ] [ 65.470000] 3.5.0-rc5 #2 Not tainted [ 65.470000] --------------------------------------------- [ 65.470000] ksdioirqd/mmc0/73 is trying to acquire lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] but task is already holding lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] other info that might help us debug this: [ 65.470000] Possible unsafe locking scenario: [ 65.470000] [ 65.470000] CPU0 [ 65.470000] ---- [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] [ 65.470000] *** DEADLOCK *** [ 65.470000] [ 65.470000] May be due to missing lock nesting notation [ 65.470000] [ 65.470000] 1 lock held by ksdioirqd/mmc0/73: [ 65.470000] #0: (&(&host->lock)->rlock#2){-.-...}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] stack backtrace: [ 65.470000] [] (unwind_backtrace+0x0/0xf4) from [] (__lock_acquire+0x14f8/0x1b98) [ 65.470000] [] (__lock_acquire+0x14f8/0x1b98) from [] (lock_acquire+0xa0/0x108) [ 65.470000] [] (lock_acquire+0xa0/0x108) from [] (_raw_spin_lock_irqsave+0x48/0x5c) [ 65.470000] [] (_raw_spin_lock_irqsave+0x48/0x5c) from [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [] (sdio_irq_thread+0x1bc/0x274) from [] (kthread+0x8c/0x98) [ 65.470000] [] (kthread+0x8c/0x98) from [] (kernel_thread_exit+0x0/0x8) [ 65.470000] BUG: spinlock lockup suspected on CPU#0, ksdioirqd/mmc0/73 [ 65.470000] lock: 0xc3358724, .magic: dead4ead, .owner: ksdioirqd/mmc0/73, .owner_cpu: 0 [ 65.470000] [] (unwind_backtrace+0x0/0xf4) from [] (do_raw_spin_lock+0x100/0x144) [ 65.470000] [] (do_raw_spin_lock+0x100/0x144) from [] (_raw_spin_lock_irqsave+0x50/0x5c) [ 65.470000] [] (_raw_spin_lock_irqsave+0x50/0x5c) from [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [] (sdio_irq_thread+0x1bc/0x274) from [] (kthread+0x8c/0x98) [ 65.470000] [] (kthread+0x8c/0x98) from [] (kernel_thread_exit+0x0/0x8) Reported-by: Attila Kinali Signed-off-by: Lauri Hintsala Acked-by: Shawn Guo Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/host/mxs-mmc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index e62e58e5053d..ad3fcea1269e 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -644,11 +644,6 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); writel(BM_SSP_CTRL1_SDIO_IRQ_EN, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET); - - if (readl(host->base + HW_SSP_STATUS(host)) & - BM_SSP_STATUS_SDIO_IRQ) - mmc_signal_sdio_irq(host->mmc); - } else { writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); @@ -657,6 +652,11 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) } spin_unlock_irqrestore(&host->lock, flags); + + if (enable && readl(host->base + HW_SSP_STATUS(host)) & + BM_SSP_STATUS_SDIO_IRQ) + mmc_signal_sdio_irq(host->mmc); + } static const struct mmc_host_ops mxs_mmc_ops = { -- cgit v1.2.3 From 74f330bceaa7b88d06062e1cac3d519a3dfc041e Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 23:10:01 +0800 Subject: mmc: sdhci-esdhc: break out early if clock is 0 Since commit 30832ab56 ("mmc: sdhci: Always pass clock request value zero to set_clock host op") was merged, esdhc_set_clock starts hitting "if (clock == 0)" where ESDHC_SYSTEM_CONTROL has been operated. This causes SDHCI card-detection function being broken. Fix the regression by moving "if (clock == 0)" above ESDHC_SYSTEM_CONTROL operation. Signed-off-by: Shawn Guo Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index b97b2f5dafdb..d25f9ab9a54d 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) int div = 1; u32 temp; + if (clock == 0) + goto out; + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); - if (clock == 0) - goto out; - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) pre_div *= 2; -- cgit v1.2.3 From 077d40731edc90ee9dedf63249034c8cd5f694ce Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 24 Jul 2012 11:42:04 +0200 Subject: mmc: atmel-mci: not busy flag has also to be used for read operations Even if the datasheet says that the not busy flag has to be used only for write operations, it's false except for version lesser than v2xx. Not waiting on the not busy flag for read operations can cause the controller to hang-up during the initialization of some SD cards with DMA after the first CMD6 -- the next command is sent too early. Signed-off-by: Ludovic Desroches Cc: stable [3.5, 3.6] Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 322412cec4ee..a53c7c478e05 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -81,6 +81,7 @@ struct atmel_mci_caps { bool has_bad_data_ordering; bool need_reset_after_xfer; bool need_blksz_mul_4; + bool need_notbusy_for_read_ops; }; struct atmel_mci_dma { @@ -1625,7 +1626,8 @@ static void atmci_tasklet_func(unsigned long priv) __func__); atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (host->data->flags & MMC_DATA_WRITE) { + if (host->caps.need_notbusy_for_read_ops || + (host->data->flags & MMC_DATA_WRITE)) { atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); state = STATE_WAITING_NOTBUSY; } else if (host->mrq->stop) { @@ -2218,6 +2220,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_bad_data_ordering = 1; host->caps.need_reset_after_xfer = 1; host->caps.need_blksz_mul_4 = 1; + host->caps.need_notbusy_for_read_ops = 0; /* keep only major version number */ switch (version & 0xf00) { @@ -2238,6 +2241,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) case 0x200: host->caps.has_rwproof = 1; host->caps.need_blksz_mul_4 = 0; + host->caps.need_notbusy_for_read_ops = 1; case 0x100: host->caps.has_bad_data_ordering = 0; host->caps.need_reset_after_xfer = 0; -- cgit v1.2.3 From 182c90815993452f1902837cc342ac2c05ef13f5 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 1 Aug 2012 09:30:30 +0900 Subject: mmc: dw_mmc: amend using error interrupt status RINTSTS status includes masked interrupts as well as unmasked. data_status and cmd_status are set by value of RINTSTS in interrupt handler and tasklet finally uses it to decide whether error is happened or not. In addition, MINTSTS status is used for setting data_status in PIO. Masked error interrupt will not be handled and that status can be considered non-error case. Signed-off-by: Seungwon Jeon Reviewed By: Girish K S Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 72dc3cde646d..7baed457dc3b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1547,12 +1547,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) { struct dw_mci *host = dev_id; - u32 status, pending; + u32 pending; unsigned int pass_count = 0; int i; do { - status = mci_readl(host, RINTSTS); pending = mci_readl(host, MINTSTS); /* read-only mask reg */ /* @@ -1570,7 +1569,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_CMD_ERROR_FLAGS) { mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); - host->cmd_status = status; + host->cmd_status = pending; smp_wmb(); set_bit(EVENT_CMD_COMPLETE, &host->pending_events); } @@ -1578,7 +1577,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_DATA_ERROR_FLAGS) { /* if there is an error report DATA_ERROR */ mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); - host->data_status = status; + host->data_status = pending; smp_wmb(); set_bit(EVENT_DATA_ERROR, &host->pending_events); if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC | @@ -1589,7 +1588,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & SDMMC_INT_DATA_OVER) { mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); if (!host->data_status) - host->data_status = status; + host->data_status = pending; smp_wmb(); if (host->dir_status == DW_MCI_RECV_STATUS) { if (host->sg != NULL) @@ -1613,7 +1612,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & SDMMC_INT_CMD_DONE) { mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); - dw_mci_cmd_interrupt(host, status); + dw_mci_cmd_interrupt(host, pending); } if (pending & SDMMC_INT_CD) { -- cgit v1.2.3 From 9b2026a12511439d906a5d8d302ae285ebe7378a Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 1 Aug 2012 09:30:40 +0900 Subject: mmc: dw_mmc: correct mishandling error interrupt Datasheet of SYNOPSYS mentions that DTO(Data Transfer Over) interrupt will be raised even if some error interrupts, however it is actually found that DTO does not occur. SYNOPSYS has confirmed this issue. Current implementation defers the call of tasklet_schedule until DTO when the error interrupts is happened. This patch fixes error handling. Signed-off-by: Seungwon Jeon Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 7baed457dc3b..1a5db20133ee 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1580,9 +1580,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) host->data_status = pending; smp_wmb(); set_bit(EVENT_DATA_ERROR, &host->pending_events); - if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC | - SDMMC_INT_SBE | SDMMC_INT_EBE))) - tasklet_schedule(&host->tasklet); + tasklet_schedule(&host->tasklet); } if (pending & SDMMC_INT_DATA_OVER) { -- cgit v1.2.3 From e74f3a9c993a088f0a067e13941075e4acb7300a Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 1 Aug 2012 09:30:46 +0900 Subject: mmc: dw_mmc: fix error handling in PIO mode Data transfer will be continued until all the bytes are transmitted, even if data crc error occurs during a multiple-block data transfer. This means RXDR/TXDR interrupts will occurs until data transfer is terminated. Early setting of host->sg to NULL prevents going into xxx_data_pio functions, hence permanent unhandled RXDR/TXDR interrupts occurs. And checking error interrupt status in the xxx_data_pio functions is no need because dw_mci_interrupt does do the same. This patch also removes it. Signed-off-by: Seungwon Jeon Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 29 ++--------------------------- 1 file changed, 2 insertions(+), 27 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 1a5db20133ee..cf8511b80782 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1429,22 +1429,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_RXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/ data->bytes_xfered += nbytes; @@ -1497,23 +1485,10 @@ static void dw_mci_write_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_TXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_TXDR); /* if TXDR write again */ data->bytes_xfered += nbytes; -- cgit v1.2.3 From 9623b5b9192b349bcadb31cce159072a78ac6972 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 25 Jul 2012 08:33:17 -0700 Subject: mmc: dw_mmc: Disable low power mode if SDIO interrupts are used The documentation for the dw_mmc part says that the low power mode should normally only be set for MMC and SD memory and should be turned off for SDIO cards that need interrupts detected. The best place I could find to do this is when the SDIO interrupt was first enabled. I rely on the fact that dw_mci_setup_bus() will be called when it's time to reenable. Signed-off-by: Doug Anderson Acked-by: Seungwon Jeon Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 41 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 38 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index cf8511b80782..af40d227bece 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -627,6 +627,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) { struct dw_mci *host = slot->host; u32 div; + u32 clk_en_a; if (slot->clock != host->current_speed) { div = host->bus_hz / slot->clock; @@ -659,9 +660,11 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); - /* enable clock */ - mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE | - SDMMC_CLKEN_LOW_PWR) << slot->id)); + /* enable clock; only low power if no SDIO */ + clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) + clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; + mci_writel(host, CLKENA, clk_en_a); /* inform CIU */ mci_send_cmd(slot, @@ -862,6 +865,30 @@ static int dw_mci_get_cd(struct mmc_host *mmc) return present; } +/* + * Disable lower power mode. + * + * Low power mode will stop the card clock when idle. According to the + * description of the CLKENA register we should disable low power mode + * for SDIO cards if we need SDIO interrupts to work. + * + * This function is fast if low power mode is already disabled. + */ +static void dw_mci_disable_low_power(struct dw_mci_slot *slot) +{ + struct dw_mci *host = slot->host; + u32 clk_en_a; + const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id; + + clk_en_a = mci_readl(host, CLKENA); + + if (clk_en_a & clken_low_pwr) { + mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr); + mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | + SDMMC_CMD_PRV_DAT_WAIT, 0); + } +} + static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) { struct dw_mci_slot *slot = mmc_priv(mmc); @@ -871,6 +898,14 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) /* Enable/disable Slot Specific SDIO interrupt */ int_mask = mci_readl(host, INTMASK); if (enb) { + /* + * Turn off low power mode if it was enabled. This is a bit of + * a heavy operation and we disable / enable IRQs a lot, so + * we'll leave low power mode disabled and it will get + * re-enabled again in dw_mci_setup_bus(). + */ + dw_mci_disable_low_power(slot); + mci_writel(host, INTMASK, (int_mask | SDMMC_INT_SDIO(slot->id))); } else { -- cgit v1.2.3 From 3550ccdb9d8d350e526b809bf3dd92b550a74fe1 Mon Sep 17 00:00:00 2001 From: Ian Chen Date: Wed, 29 Aug 2012 15:05:36 +0900 Subject: mmc: card: Skip secure erase on MoviNAND; causes unrecoverable corruption. For several MoviNAND eMMC parts, there are known issues with secure erase and secure trim. For these specific MoviNAND devices, we skip these operations. Specifically, there is a bug in the eMMC firmware that causes unrecoverable corruption when the MMC is erased with MMC_CAP_ERASE enabled. References: http://forum.xda-developers.com/showthread.php?t=1644364 https://plus.google.com/111398485184813224730/posts/21pTYfTsCkB#111398485184813224730/posts/21pTYfTsCkB Signed-off-by: Ian Chen Reviewed-by: Namjae Jeon Acked-by: Jaehoon Chung Reviewed-by: Linus Walleij Cc: stable [3.0+] Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 26 +++++++++++++++++++++++++- include/linux/mmc/card.h | 1 + 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index f1c84decb192..172a768036d8 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1411,7 +1411,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); - if (req->cmd_flags & REQ_SECURE) + if (req->cmd_flags & REQ_SECURE && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) ret = mmc_blk_issue_secdiscard_rq(mq, req); else ret = mmc_blk_issue_discard_rq(mq, req); @@ -1716,6 +1717,7 @@ force_ro_fail: #define CID_MANFID_SANDISK 0x2 #define CID_MANFID_TOSHIBA 0x11 #define CID_MANFID_MICRON 0x13 +#define CID_MANFID_SAMSUNG 0x15 static const struct mmc_fixup blk_fixups[] = { @@ -1752,6 +1754,28 @@ static const struct mmc_fixup blk_fixups[] = MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc, MMC_QUIRK_LONG_READ_TIME), + /* + * On these Samsung MoviNAND parts, performing secure erase or + * secure trim can result in unrecoverable corruption due to a + * firmware bug. + */ + MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + END_FIXUP }; diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 111aca5e97f3..4b27f9f503e4 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -239,6 +239,7 @@ struct mmc_card { #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */ #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */ #define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */ +#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */ /* byte mode */ unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ #define MMC_NO_POWER_NOTIFICATION 0 -- cgit v1.2.3 From 75b53aee2f4fe6375c6007226bf68d75b5c4a929 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 24 Aug 2012 06:00:18 +0000 Subject: mmc: omap: fix broken PIO mode After commit 26b88520b80695a6fa5fd95b5d97c03f4daf87e0 ("mmc: omap_hsmmc: remove private DMA API implementation"), the Nokia N800 here stopped booting: [ 2.086181] Waiting for root device /dev/mmcblk0p1... [ 2.324066] Unhandled fault: imprecise external abort (0x406) at 0x00000000 [ 2.331451] Internal error: : 406 [#1] ARM [ 2.335784] Modules linked in: [ 2.339050] CPU: 0 Not tainted (3.6.0-rc3 #60) [ 2.344146] PC is at default_idle+0x28/0x30 [ 2.348602] LR is at trace_hardirqs_on_caller+0x15c/0x1b0 ... This turned out to be due to memory corruption caused by long-broken PIO code in drivers/mmc/host/omap.c. (Previously, this driver had been using DMA; but the above commit caused the MMC driver to fall back to PIO mode with an unmodified Kconfig.) The PIO code, added with the rest of the driver in commit 730c9b7e6630f786fcec026fb11d2e6f2c90fdcb ("[MMC] Add OMAP MMC host driver"), confused bytes with 16-bit words. This bug caused memory located after the PIO transfer buffer to be corrupted with transfers larger than 32 bytes. The driver also did not increment the buffer pointer after the transfer occurred. This bug resulted in data corruption during any transfer larger than 64 bytes. Signed-off-by: Paul Walmsley Reviewed-by: Felipe Balbi Tested-by: Tony Lindgren Signed-off-by: Chris Ball --- drivers/mmc/host/omap.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 50e08f03aa65..a5999a74496a 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -668,7 +668,7 @@ mmc_omap_clk_timer(unsigned long data) static void mmc_omap_xfer_data(struct mmc_omap_host *host, int write) { - int n; + int n, nwords; if (host->buffer_bytes_left == 0) { host->sg_idx++; @@ -678,15 +678,23 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) n = 64; if (n > host->buffer_bytes_left) n = host->buffer_bytes_left; + + nwords = n / 2; + nwords += n & 1; /* handle odd number of bytes to transfer */ + host->buffer_bytes_left -= n; host->total_bytes_left -= n; host->data->bytes_xfered += n; if (write) { - __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } else { - __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } + + host->buffer += nwords; } static inline void mmc_omap_report_irq(u16 status) -- cgit v1.2.3