summaryrefslogtreecommitdiff
path: root/virt/kvm/ioapic.h
AgeCommit message (Collapse)AuthorFilesLines
2014-01-08kvm: make local functions staticStephen Hemminger1-1/+0
Running 'make namespacecheck' found lots of functions that should be declared static, since only used in one file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16KVM: Set TMR when programming ioapic entryYang Zhang1-1/+2
We already know the trigger mode of a given interrupt when programming the ioapice entry. So it's not necessary to set it in each interrupt delivery. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16KVM: Call common update function when ioapic entry changed.Yang Zhang1-4/+2
Both TMR and EOI exit bitmap need to be updated when ioapic changed or vcpu's id/ldr/dfr changed. So use common function instead eoi exit bitmap specific function. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15KVM: Let ioapic know the irq line statusYang Zhang1-1/+1
Userspace may deliver RTC interrupt without query the status. So we want to track RTC EOI for this case. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15KVM: Add reset/restore rtc_status supportYang Zhang1-0/+1
restore rtc_status from migration or save/restore Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15KVM: Return destination vcpu on interrupt injectionYang Zhang1-1/+1
Add a new parameter to know vcpus who received the interrupt. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15KVM: Introduce struct rtc_statusYang Zhang1-0/+12
rtc_status is used to track RTC interrupt delivery status. The pending_eoi will be increased by vcpu who received RTC interrupt and will be decreased when EOI to this interrupt. Also, we use dest_map to record the destination vcpu to avoid the case that vcpu who didn't get the RTC interupt, but issued EOI with same vector of RTC and descreased pending_eoi by mistake. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-15KVM: Add vcpu info to ioapic_update_eoi()Yang Zhang1-1/+2
Add vcpu info to ioapic_update_eoi, so we can know which vcpu issued this EOI. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-29x86, apicv: add virtual interrupt delivery supportYang Zhang1-0/+4
Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-07-20KVM: fix race with level interruptsMichael S. Tsirkin1-1/+3
When more than 1 source id is in use for the same GSI, we have the following race related to handling irq_states race: CPU 0 clears bit 0. CPU 0 read irq_state as 0. CPU 1 sets level to 1. CPU 1 calls kvm_ioapic_set_irq(1). CPU 0 calls kvm_ioapic_set_irq(0). Now ioapic thinks the level is 0 but irq_state is not 0. Fix by performing all irq_states bitmap handling under pic/ioapic lock. This also removes the need for atomics with irq_states handling. Reported-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-16KVM: dont clear TMR on EOIMichael S. Tsirkin1-0/+1
Intel spec says that TMR needs to be set/cleared when IRR is set, but kvm also clears it on EOI. I did some tests on a real (AMD based) system, and I see same TMR values both before and after EOI, so I think it's a minor bug in kvm. This patch fixes TMR to be set/cleared on IRR set only as per spec. And now that we don't clear TMR, we can save an atomic read of TMR on EOI that's not propagated to ioapic, by checking whether ioapic needs a specific vector first and calculating the mode afterwards. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13KVM: convert ioapic lock to spinlockMarcelo Tosatti1-1/+1
kvm_set_irq is used from non sleepable contexes, so convert ioapic from mutex to spinlock. KVM-Stable-Tag. Tested-by: Ralf Bonenkamp <ralf.bonenkamp@swyx.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01KVM: cleanup the failure path of KVM_CREATE_IRQCHIP ioctrlWei Yongjun1-0/+1
If we fail to init ioapic device or the fail to setup the default irq routing, the device register by kvm_create_pic() and kvm_ioapic_init() remain unregister. This patch fixed to do this. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: avoid taking ioapic mutex for non-ioapic EOIsAvi Kivity1-0/+1
When the guest acknowledges an interrupt, it sends an EOI message to the local apic, which broadcasts it to the ioapic. To handle the EOI, we need to take the ioapic mutex. On large guests, this causes a lot of contention on this mutex. Since large guests usually don't route interrupts via the ioapic (they use msi instead), this is completely unnecessary. Avoid taking the mutex by introducing a handled_vectors bitmap. Before taking the mutex, check if the ioapic was actually responsible for the acked vector. If not, we can return early. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03KVM: Move IO APIC to its own lockGleb Natapov1-0/+4
The allows removal of irq_lock from the injection path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03KVM: Move irq sharing information to irqchip levelGleb Natapov1-0/+1
This removes assumptions that max GSIs is smaller than number of pins. Sharing is tracked on pin level not GSI level. [avi: no PIC on ia64] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: APIC: get rid of deliver_bitmaskGleb Natapov1-4/+2
Deliver interrupt during destination matching loop. Signed-off-by: Gleb Natapov <gleb@redhat.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10KVM: change the way how lowest priority vcpu is calculatedGleb Natapov1-2/+1
The new way does not require additional loop over vcpus to calculate the one with lowest priority as one is chosen during delivery bitmap construction. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10KVM: consolidate ioapic/ipi interrupt delivery logicGleb Natapov1-4/+6
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in apic_send_ipi() to figure out ipi destination instead of reimplementing the logic. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10KVM: ioapic/msi interrupt delivery consolidationGleb Natapov1-2/+2
ioapic_deliver() and kvm_set_msi() have code duplication. Move the code into ioapic_deliver_entry() function and call it from both places. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10KVM: Merge kvm_ioapic_get_delivery_bitmask into kvm_get_intr_delivery_bitmaskSheng Yang1-2/+3
Gleb fixed bitmap ops usage in kvm_ioapic_get_delivery_bitmask. Sheng merged two functions, as well as fixed several issues in kvm_get_intr_delivery_bitmask 1. deliver_bitmask is a bitmap rather than a unsigned long intereger. 2. Lowest priority target bitmap wrong calculated by mistake. 3. Prevent potential NULL reference. 4. Declaration in include/kvm_host.h caused powerpc compilation warning. 5. Add warning for guest broadcast interrupt with lowest priority delivery mode. 6. Removed duplicate bitmap clean up in caller of kvm_get_intr_delivery_bitmask. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-06-10KVM: Update intr delivery func to accept unsigned long* bitmapSheng Yang1-1/+1
Would be used with bit ops, and would be easily extended if KVM_MAX_VCPUS is increased. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Change API of kvm_ioapic_get_delivery_bitmaskSheng Yang1-2/+2
In order to use with bit ops. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10KVM: Split IOAPIC structureSheng Yang1-16/+1
Prepared for reuse ioapic_redir_entry for MSI. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24KVM: Report IRQ injection status to userspace.Gleb Natapov1-1/+1
IRQ injection status is either -1 (if there was no CPU found that should except the interrupt because IRQ was masked or ioapic was misconfigured or ...) or >= 0 in that case the number indicates to how many CPUs interrupt was injected. If the value is 0 it means that the interrupt was coalesced and probably should be reinjected. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-12-31KVM: Export ioapic_get_delivery_bitmaskSheng Yang1-0/+2
It would be used for MSI in device assignment, for MSI dispatch. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-15KVM: Move irqchip_in_kernel() from ioapic.h to irq.hXiantao Zhang1-7/+0
Moving irqchip_in_kernel() from ioapic.h to irq.h. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: irq ack notificationMarcelo Tosatti1-1/+2
Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com> which was based on a patch from: Amit Shah <amit.shah@qumranet.com> Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things: - Edge triggered interrupts on IOAPIC - PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably needs something similar). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> CC: Amit Shah <amit.shah@qumranet.com> CC: Ben-Ami Yassour <benami@il.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: Move ioapic code to common directory.Zhang Xiantao1-0/+95
Move ioapic code to common, since IA64 also needs it. Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 12:24:15 +0000