summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2015-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-3/+4
Pull networking fixes from David Miller: 1) Fix list tests in netfilter ingress support, from Florian Westphal. 2) Fix reversal of input and output interfaces in ingress hook invocation, from Pablo Neira Ayuso. 3) We have a use after free in r8169, caught by Dave Jones, fixed by Francois Romieu. 4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa. 5) Three ipv6 route handling bug fixes from Martin KaFai Lau: a) Don't create clone routes not managed by the fib6 tree b) Don't forget to check expiration of DST_NOCACHE routes. c) Handle rt->dst.from == NULL properly. 6) Several AF_PACKET fixes wrt transport header setting and SKB protocol setting, from Daniel Borkmann. 7) Fix thunder driver crash on shutdown, from Pavel Fedin. 8) Several Mellanox driver fixes (max MTU calculations, use of correct DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich. 9) Several mv88e6060 DSA driver fixes (wrong bit definitions for certain registers, etc.) from Neil Armstrong. 10) Make sure to disable preemption while updating per-cpu stats of ip tunnels, from Jason A. Donenfeld. 11) Various ARM64 bpf JIT fixes, from Yang Shi. 12) Flush icache properly in ARM JITs, from Daniel Borkmann. 13) Fix masking of RX and TX interrupts in ravb driver, from Masaru Nagai. 14) Fix netdev feature propagation for devices not implementing ->ndo_set_features(). From Nikolay Aleksandrov. 15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare. 16) RAW socket code increments incorrect SNMP counters, fix from Ben Cartwright-Cox. 17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman. 18) Fix handling of VLAN headers on stacked devices when REORDER is disabled. From Vlad Yasevich. 19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) MAINTAINERS: Update Mellanox's Eth NIC driver entries net/core: revert "net: fix __netdev_update_features return.." and add comment af_unix: take receive queue lock while appending new skb rtnetlink: fix frame size warning in rtnl_fill_ifinfo net: use skb_clone to avoid alloc_pages failure. packet: Use PAGE_ALIGNED macro packet: Don't check frames_per_block against negative values net: phy: Use interrupts when available in NOLINK state phy: marvell: Add support for 88E1540 PHY arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS macvlan: fix leak in macvlan_handle_frame ipvlan: fix use after free of skb ipvlan: fix leak in ipvlan_rcv_frame vlan: Do not put vlan headers back on bridge and macvlan ports vlan: Fix untag operations of stacked vlans with REORDER_HEADER off via-velocity: unconditionally drop frames with bad l2 length ipg: Remove ipg driver dl2k: Add support for IP1000A-based cards snmp: Remove duplicate OUTMCAST stat increment net: thunder: Check for driver data in nicvf_remove() ...
2015-11-15tools/net: Use include/uapi with __EXPORTED_HEADERS__Kamal Mostafa1-3/+4
Use the local uapi headers to keep in sync with "recently" added #define's (e.g. SKF_AD_VLAN_TPID). Refactored CFLAGS, and bpf_asm doesn't need -I. Fixes: 3f356385e8a4 ("filter: bpf_asm: add minimal bpf asm tool") Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds35-278/+934
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Mostly updates to the perf tool plus two fixes to the kernel core code: - Handle tracepoint filters correctly for inherited events (Peter Zijlstra) - Prevent a deadlock in perf_lock_task_context (Paul McKenney) - Add missing newlines to some pr_err() calls (Arnaldo Carvalho de Melo) - Print full source file paths when using 'perf annotate --print-line --full-paths' (Michael Petlan) - Fix 'perf probe -d' when just one out of uprobes and kprobes is enabled (Wang Nan) - Add compiler.h to list.h to fix 'make perf-tar-src-pkg' generated tarballs, i.e. out of tree building (Arnaldo Carvalho de Melo) - Add the llvm-src-base.c and llvm-src-kbuild.c files, generated by the 'perf test' LLVM entries, when running it in-tree, to .gitignore (Yunlong Song) - libbpf error reporting improvements, using a strerror interface to more precisely tell the user about problems with the provided scriptlet, be it in C or as a ready made object file (Wang Nan) - Do not be case sensitive when searching for matching 'perf test' entries (Arnaldo Carvalho de Melo) - Inform the user about objdump failures in 'perf annotate' (Andi Kleen) - Improve the LLVM 'perf test' entry, introduce a new ones for BPF and kbuild tests to check the environment used by clang to compile .c scriptlets (Wang Nan)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macro tools include: Add compiler.h to list.h perf probe: Verify parameters in two functions perf session: Add missing newlines to some pr_err() calls perf annotate: Support full source file paths for srcline fix perf test: Add llvm-src-base.c and llvm-src-kbuild.c to .gitignore perf: Fix inherited events vs. tracepoint filters perf: Disable IRQs across RCU RS CS that acquires scheduler lock perf test: Do not be case sensitive when searching for matching tests perf test: Add 'perf test BPF' perf test: Enhance the LLVM tests: add kbuild test perf test: Enhance the LLVM test: update basic BPF test program perf bpf: Improve BPF related error messages perf tools: Make fetch_kernel_version() publicly available bpf tools: Add new API bpf_object__get_kversion() bpf tools: Improve libbpf error reporting perf probe: Cleanup find_perf_probe_point_from_map to reduce redundancy perf annotate: Inform the user about objdump failures in --stdio perf stat: Make stat options global perf sched latency: Fix thread pid reuse issue ...
2015-11-15Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds4-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull liblockdep fixes from Thomas Gleixner: "Three small patches to synchronize liblockdep with the latest core changes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/liblockdep: explicitly declare lockdep API we call from liblockdep tools/liblockdep: add userspace versions of WRITE_ONCE and RCU_INIT_POINTER tools/liblockdep: remove task argument from debug_check_no_locks_held
2015-11-13Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - three fixes tagged for -stable including a crash fix, simple performance tweak, and an invalid i/o error. - build regression fix for the nvdimm unit tests - nvdimm documentation update * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: fix __dax_pmd_fault crash libnvdimm: documentation clarifications libnvdimm, pmem: fix size trim in pmem_direct_access() libnvdimm, e820: fix numa node for e820-type-12 pmem ranges tools/testing/nvdimm, acpica: fix flag rename build breakage
2015-11-12Merge tag 'pm+acpi-4.4-rc1-2' of ↵Linus Torvalds11-63/+88
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The only new feature in this batch is support for the ACPI _CCA device configuration object, which it a pre-requisite for future ACPI PCI support on ARM64, but should not affect the other architectures. The rest is fixes and cleanups, mostly in cpufreq (including intel_pstate), the Operating Performace Points (OPP) framework and tools (cpupower and turbostat). Specifics: - Support for the ACPI _CCA configuration object intended to tell the OS whether or not a bus master device supports hardware managed cache coherency and a new set of functions to allow drivers to check the cache coherency support for devices in a platform firmware interface agnostic way (Suravee Suthikulpanit, Jeremy Linton). - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X (Aaron Lu, Hans de Goede). - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers (Jon Medhurst, Nicolas Pitre). - kfree()-related fixup for the recently introduced CPPC cpufreq frontend (Markus Elfring). - intel_pstate fix reducing kernel log noise on systems where P-states are managed by hardware (Prarit Bhargava). - intel_pstate maintainers information update (Srinivas Pandruvada). - cpufreq core optimization related to the handling of delayed work items used by governors (Viresh Kumar). - Locking fixes and cleanups of the Operating Performance Points (OPP) framework (Viresh Kumar). - Generic power domains framework cleanups (Lina Iyer). - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas Renninger). - turbostat tool updates (Len Brown)" * tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) PCI: ACPI: Add support for PCI device DMA coherency PCI: OF: Move of_pci_dma_configure() to pci_dma_configure() of/pci: Fix pci_get_host_bridge_device leak device property: ACPI: Remove unused DMA APIs device property: ACPI: Make use of the new DMA Attribute APIs device property: Adding DMA Attribute APIs for Generic Devices ACPI: Adding DMA Attribute APIs for ACPI Device device property: Introducing enum dev_dma_attr ACPI: Honor ACPI _CCA attribute setting cpufreq: CPPC: Delete an unnecessary check before the function call kfree() PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp() PM / OPP: Hold dev_opp_list_lock for writers PM / OPP: Protect updates to list_dev with mutex PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus() cpufreq: s5pv210-cpufreq: fix wrong do_div() usage MAINTAINERS: update for intel P-state driver Creating a common structure initialization pattern for struct option cpupower: Enable disabled Cstates if they are below max latency cpupower: Remove debug message when using cpupower idle-set -D switch cpupower: cpupower monitor reports uninitialized values for offline cpus ...
2015-11-12tools/testing/nvdimm, acpica: fix flag rename build breakageDan Williams1-1/+1
Commit ca321d1ca672 "ACPICA: Update NFIT table to rename a flags field" performed a tree-wide s/ACPI_NFIT_MEM_ARMED/ACPI_NFIT_MEM_NOT_ARMED/ operation, but missed the tools/testing/nvdimm/ directory. Cc: Bob Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12Merge branch 'pm-tools'Rafael J. Wysocki11-63/+88
* pm-tools: Creating a common structure initialization pattern for struct option cpupower: Enable disabled Cstates if they are below max latency cpupower: Remove debug message when using cpupower idle-set -D switch cpupower: cpupower monitor reports uninitialized values for offline cpus tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO tools/power turbostat: simplify Bzy_MHz calculation
2015-11-11tools include: Add compiler.h to list.hArnaldo Carvalho de Melo1-0/+1
list.h needs WRITE_ONCE() since 7f5f873c6a07 ("rculist: Use WRITE_ONCE() when deleting from reader-visible list") add it before including the kernel's list.h file. This fixes builds of 'make perf-tar-src-pkg' perf tool tarball builds, i.e. out of tree builds. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-e0rb8f7jwz0jn24ttyick9u6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-11perf probe: Verify parameters in two functionsWang Nan1-0/+6
On kernel with only one out of CONFIG_KPROBE_EVENTS and CONFIG_UPROBE_EVENTS enabled, 'perf probe -d' causes a segfault because perf_del_probe_events() calls probe_file__get_events() with a negative fd. This patch fixes it by adding parameter validation at the entry of probe_file__get_events() and probe_file__get_rawlist(). Since they are both non-static public functions (in .h file), parameter verifying is required. v1 -> v2: Verify fd at the head of probe_file__get_rawlist() instead of checking at call site (suggested by Masami and Arnaldo at [1,2]). [1] http://lkml.kernel.org/r/50399556C9727B4D88A595C8584AAB37526048E3@GSjpTKYDCembx32.service.hitachi.net [2] http://lkml.kernel.org/r/20151105155830.GV13236@kernel.org Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446803415-83382-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-11perf session: Add missing newlines to some pr_err() callsArnaldo Carvalho de Melo1-4/+4
Before: [acme@zoo linux]$ perf evlist WARNING: The perf.data file's data size field is 0 which is unexpected. Was the 'perf record' command properly terminated? non matching sample_type[acme@zoo linux]$ After: [acme@zoo linux]$ perf evlist WARNING: The perf.data file's data size field is 0 which is unexpected. Was the 'perf record' command properly terminated? non matching sample_type [acme@zoo linux]$ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wscok3a2s7yrj8156oc2r6qe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-11perf annotate: Support full source file paths for srcline fixMichael Petlan1-0/+1
The --full-paths option did not show the full source file paths in the 'perf annotate' tool, because the value of the option was not propagated into the related functions. With this patch the value of the --full-paths option is known to the function that composes the srcline string, so it prints the full path when necessary. Committer Note: This affects annotate when the --print-line option is used: # perf annotate -h 2>&1 | grep print-line -l, --print-line print matching source lines (may be slow) Looking just at the lines that should be affected by this change: Before: # perf annotate --print-line --full-paths --stdio fput | grep '\.[ch]:[0-9]\+' 94.44 atomic64_64.h:114 5.56 file_table.c:265 file_table.c:265 5.56 : ffffffff81219a00: callq ffffffff81769360 <__fentry__> atomic64_64.h:114 94.44 : ffffffff81219a05: lock decq 0x38(%rdi) After: # perf annotate --print-line --full-paths --stdio fput | grep '\.[ch]:[0-9]\+' 94.44 /home/git/linux/arch/x86/include/asm/atomic64_64.h:114 5.56 /home/git/linux/fs/file_table.c:265 /home/git/linux/fs/file_table.c:265 5.56 : ffffffff81219a00: callq ffffffff81769360 <__fentry__> /home/git/linux/arch/x86/include/asm/atomic64_64.h:114 94.44 : ffffffff81219a05: lock decq 0x38(%rdi) # Signed-off-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/2365 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-11perf test: Add llvm-src-base.c and llvm-src-kbuild.c to .gitignoreYunlong Song1-0/+2
Commit b31de018a6284a25e0fdfeb028e724f8417ec3b1 ("perf test: Enhance the LLVM test: update basic BPF test program") dynamically creates file llvm-src-base.c during the perf building. Similarly, the commit 7af3f3d55b80cce40ad94b6b8e173dccedaf25e6 ("perf test: Enhance the LLVM tests: add kbuild test") dynamically creates file llvm-src-kbuild.c during the perf building. Add them to .gitignore. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Fixes: b31de018a628 ("perf test: Enhance the LLVM test: update basic BPF test program") Fixes: 7af3f3d55b80 ("perf test: Enhance the LLVM tests: add kbuild test") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-11Merge branch 'next' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Implement generic devfreq cooling mechanism through frequency reduction for devices using devfreq. From Ørjan Eide and Javi Merino. - Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack and Eduardo Valentin. - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and Rockchip thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: exynos: Directly return 0 instead of using local ret variable thermal: exynos: Remove unneeded semicolon thermal: exynos: Use IS_ERR() because regulator cannot be NULL thermal: exynos: Fix first temperature read after registering sensor thermal: exynos: Fix unbalanced regulator disable on probe failure devfreq_cooling: return on allocation failure thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r dt-bindings: rockchip-thermal: Add the pinctrl states in this document thermal: devfreq_cooling: Make power a u64 thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister thermal: underflow bug in imx_set_trip_temp() thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula thermal: imx: register irq handler later in probe thermal: rockhip: fix setting thermal shutdown polarity thermal: rockchip: fix handling of invalid readings devfreq_cooling: add trace information thermal: Add devfreq cooling PM / OPP: get the voltage for all OPPs tools/thermal: tmon: use pkg-config also for CFLAGS linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS ...
2015-11-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+3
Merge final patch-bomb from Andrew Morton: "Various leftovers, mainly Christoph's pci_dma_supported() removals" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: pci: remove pci_dma_supported usbnet: remove ifdefed out call to dma_supported kaweth: remove ifdefed out call to dma_supported sfc: don't call dma_supported nouveau: don't call pci_dma_supported netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported cx23885: use pci_set_dma_mask insted of pci_dma_supported cx25821: use pci_set_dma_mask insted of pci_dma_supported cx88: use pci_set_dma_mask insted of pci_dma_supported saa7134: use pci_set_dma_mask insted of pci_dma_supported saa7164: use pci_set_dma_mask insted of pci_dma_supported tw68-core: use pci_set_dma_mask insted of pci_dma_supported pcnet32: use pci_set_dma_mask insted of pci_dma_supported lib/string.c: add ULL suffix to the constant definition hugetlb: trivial comment fix selftests/mlock2: add ULL suffix to 64-bit constants selftests/mlock2: add missing #define _GNU_SOURCE
2015-11-10Merge tag 'linux-kselftest-4.4-rc1' of ↵Linus Torvalds22-53/+362
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This 12 patch update for 4.4-rc1 consists of a new pstore test and fixes to existing tests" * tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: breakpoint: Actually build it selftests: vm: Try harder to allocate huge pages selftests: Make scripts executable selftests: kprobe: Choose an always-defined function to probe selftests: memfd: Stop unnecessary rebuilds selftests: Add missing #include directives selftests/seccomp: Be more precise with syscall arguments. selftests/seccomp: build and pass on arm64 selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned selftests/pstore: add pstore test scripts going with reboot selftests/pstore: add pstore test script for pre-reboot selftests: add .gitignore for efivarfs
2015-11-10selftests/mlock2: add ULL suffix to 64-bit constantsGeert Uytterhoeven1-2/+2
On 32-bit (e.g. m68k): mlock2-tests.c: In function 'lock_check': mlock2-tests.c:293: warning: integer constant is too large for 'long' type mlock2-tests.c:294: warning: integer constant is too large for 'long' type mlock2-tests.c:299: warning: integer constant is too large for 'long' type ... Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10selftests/mlock2: add missing #define _GNU_SOURCEGeert Uytterhoeven1-0/+1
On glibc 2.3.6: mlock2-tests.c: In function 'seek_to_smaps_entry': mlock2-tests.c:158: warning: implicit declaration of function 'getline' According to the manpage of getline(), it needs _GNU_SOURCE before glibc 2.10. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-11Merge branch 'turbostat' of ↵Rafael J. Wysocki1-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools Pull turbostat changes for v4.4 from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO tools/power turbostat: simplify Bzy_MHz calculation
2015-11-10Merge tag 'libnvdimm-for-4.4' of ↵Linus Torvalds1-2/+162
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Outside of the new ACPI-NFIT hot-add support this pull request is more notable for what it does not contain, than what it does. There were a handful of development topics this cycle, dax get_user_pages, dax fsync, and raw block dax, that need more more iteration and will wait for 4.5. The patches to make devm and the pmem driver NUMA aware have been in -next for several weeks. The hot-add support has not, but is contained to the NFIT driver and is passing unit tests. The coredump support is straightforward and was looked over by Jeff. All of it has received a 0day build success notification across 107 configs. Summary: - Add support for the ACPI 6.0 NFIT hot add mechanism to process updates of the NFIT at runtime. - Teach the coredump implementation how to filter out DAX mappings. - Introduce NUMA hints for allocations made by the pmem driver, and as a side effect all devm allocations now hint their NUMA node by default" * tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: coredump: add DAX filtering for FDPIC ELF coredumps coredump: add DAX filtering for ELF coredumps acpi: nfit: Add support for hot-add nfit: in acpi_nfit_init, break on a 0-length table pmem, memremap: convert to numa aware allocations devm_memremap_pages: use numa_mem_id devm: make allocations numa aware by default devm_memremap: convert to return ERR_PTR devm_memunmap: use devres_release() pmem: kill memremap_pmem() x86, mm: quiet arch_add_memory()
2015-11-10Merge tag 'rtc-v4.4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - Fix rtctest error path New drivers: - Microcrystal RV8803 Subsystem wide cleanups: - remove misuse of IRQF_NO_SUSPEND flag Drivers: - at91rm9200: clear RTC alarm status flag prior to suspending - davinci: remove incorrect reference to probe function - ds1307: Fix alarm programming for mcp794xx - ds1390: trickle charger support, fix ds1390_get_reg - isl1208: Pass the IRQF_ONESHOT flag - opal: fix type of token - pcf2127: fix RTC_READ_VL, remove useless driver version - pcf85063: return an error when date is invalid - pcf8563: add CLKOUT to common clock framework - rx8025: remove unnecessary braces - s3c: Set year, month, day value for setting alarm - stmp3xxx: unify register access macros - License fixes: pcf2127, da9063 - wakeup-source support for isl12057 and opal" * tag 'rtc-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (23 commits) rtc: Add a driver for Micro Crystal RV8803 rtc: s3c: Set year, month, day value for setting alarm rtc: ds1307: Fix alarm programming for mcp794xx rtc: isl12057: enable support for the standard "wakeup-source" property rtc: opal: enable support for the stardard "wakeup-source" property rtc: isl1208: Pass the IRQF_ONESHOT flag rtc: pcf8563: add CLKOUT to common clock framework rtc: davinci: remove incorrect reference to probe function rtc: at91rm9200: clear RTC alarm status flag prior to suspending rtc: pcf2127: remove useless driver version rtc: pcf2127: fix reading uninitialized value on RTC_READ_VL ioctl rtc: stmp3xxx: unify register access macros rtc: da9063: GPL copyright inconsistency fix rtc: pcf85063: return an error when date is invalid rtc: rx8025: remove unnecessary braces rtc: ds1343: remove misuse of IRQF_NO_SUSPEND flag rtc: ab8500: remove misuse of IRQF_NO_SUSPEND flag rtc: pl031: remove misuse of IRQF_NO_SUSPEND flag rtc: opal: fix type of token rtc: ds1390: Add trickle charger device tree binding ...
2015-11-09Merge branch 'liblockdep-fixes' of ↵Ingo Molnar4-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux into locking/urgent Pull liblockdep fixes from Sasha Levin: " ... three fixes for liblockdep. Just keeping up with kernel code changes and new gcc versions." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-08Merge tag 'perf-core-for-mingo-2' of ↵Ingo Molnar31-274/+920
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: Fixes: - libbpf error reporting improvements, using a strerror interface to more precisely tell the user about problems with the provided scriptlet, be it in C or as a ready made object file (Wang Nan) - Do not be case sensitive when searching for matching 'perf test' entries (Arnaldo Carvalho de Melo) - Inform the user about objdump failures in 'perf annotate' (Andi Kleen) Infrastructure changes: - Improve the LLVM 'perf test' entry, introduce a new ones for BPF and kbuild tests to check the environment used by clang to compile .c scriptlets (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-06selftests: run lib/test_printf moduleKees Cook3-0/+19
This runs the lib/test_printf module to make sure printf is operating sanely. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06tools/liblockdep: explicitly declare lockdep API we call from liblockdepSasha Levin2-1/+4
It seems that newer gcc complains about lack of explicit declaration for some of the API we use, add it in. Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-11-06tools/liblockdep: add userspace versions of WRITE_ONCE and RCU_INIT_POINTERSasha Levin1-0/+2
These were added to the kernel code in cee34d88c ("lockdep: Fix a race between /proc/lock_stat and module unload"). There's nothing special we need to do about them in userspace. Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-11-06tools/liblockdep: remove task argument from debug_check_no_locks_heldSasha Levin1-1/+1
The tas argument was removed from the kernel code in 1b1d2fb4 ("lockdep: remove task argument from debug_check_no_locks_held"). Remove it in loblockdep too. Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-11-06perf test: Do not be case sensitive when searching for matching testsArnaldo Carvalho de Melo1-1/+1
Before: # perf test llvm # perf test LLVM 35: Test LLVM searching and compiling : Ok # After # perf test llvm 35: Test LLVM searching and compiling : Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-c1u05npqbf6epse17ovfejoj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06perf test: Add 'perf test BPF'Wang Nan6-1/+248
This patch adds BPF testcase for testing BPF event filtering. By utilizing the result of 'perf test LLVM', this patch compiles the eBPF sample program then test its ability. The BPF script in 'perf test LLVM' lets only 50% samples generated by epoll_pwait() to be captured. This patch runs that system call for 111 times, so the result should contain 56 samples. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-8-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06perf test: Enhance the LLVM tests: add kbuild testWang Nan4-1/+35
This patch adds a kbuild testcase to check whether kernel headers can be correctly found. For example: # mv /lib/modules/4.3.0-rc5{,.bak} # perf test LLVM 38: Test LLVM searching and compiling : Skip # perf test -v LLVM ... <stdin>:11:10: fatal error: 'uapi/linux/fs.h' file not found #include <uapi/linux/fs.h> ^ 1 error generated. ERROR: unable to compile - Hint: Check error message shown above. Hint: You can also pre-compile it into .o using: clang -target bpf -O2 -c - with proper -I and -D options. Failed to compile test case: 'Test kbuild searching' test child finished with -2 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06perf test: Enhance the LLVM test: update basic BPF test programWang Nan4-31/+129
This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06perf bpf: Improve BPF related error messagesWang Nan4-15/+108
A series of bpf loader related error codes were introduced to help error reporting. Functions were improved to return these new error codes. Functions which return pointers were adjusted to encode error codes into return value using the ERR_PTR() interface. bpf_loader_strerror() was improved to convert these error messages to strings. It checks the error codes and calls libbpf_strerror() and strerror_r() accordingly, so caller don't need to consider checking the range of the error code. In bpf__strerror_load(), print kernel version of running kernel and the object's 'version' section to notify user how to fix his/her program. v1 -> v2: Use macro for error code. Fetch error message based on array index, eliminate for-loop. Print version strings. Before: # perf record -e ./test_kversion_nomatch_program.o sleep 1 event syntax error: './test_kversion_nomatch_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP After: # perf record -e ./test_kversion_nomatch_program.o ls event syntax error: './test_kversion_nomatch_program.o' \___ 'version' (4.4.0) doesn't match running kernel (4.3.0) SKIP Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com [ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06perf tools: Make fetch_kernel_version() publicly availableWang Nan3-33/+49
There are 2 places in llvm-utils.c which find kernel version information through uname. This patch extracts the uname related code into a fetch_kernel_version() function and puts it into util.h so it can be reused. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446818135-87310-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06bpf tools: Add new API bpf_object__get_kversion()Wang Nan2-0/+9
bpf_object__get_kversion() can be used to fetch value of object's 'version' section. Following patch will use it for error reporting. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06bpf tools: Improve libbpf error reportingWang Nan5-59/+159
In this patch, a series of libbpf specific error numbers and libbpf_strerror() are introduced to help reporting errors. Functions are updated to pass correct the error number through the CHECK_ERR() macro. All users of bpf_object__open{_buffer}() and bpf_program__title() in perf are modified accordingly. In addition, due to the error codes changing, bpf__strerror_load() is also modified to use them. bpf__strerror_head() is also changed accordingly so it can parse libbpf errors. bpf_loader_strerror() is introduced for that purpose, and will be improved by the following patch. load_program() is improved not to dump log buffer if it is empty. log buffer is also used to deduce whether the error was caused by an invalid program or other problem. v1 -> v2: - Using macro for error code. - Fetch error message based on array index, eliminate for-loop. - Use log buffer to detect the reason of failure. 3 new error code are introduced to replace LIBBPF_ERRNO__LOAD. In v1: # perf record -e ./test_ill_program.o ls event syntax error: './test_ill_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP # perf record -e ./test_kversion_nomatch_program.o ls event syntax error: './test_kversion_nomatch_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP # perf record -e ./test_big_program.o ls event syntax error: './test_big_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP In v2: # perf record -e ./test_ill_program.o ls event syntax error: './test_ill_program.o' \___ Kernel verifier blocks program loading SKIP # perf record -e ./test_kversion_nomatch_program.o event syntax error: './test_kversion_nomatch_program.o' \___ Incorrect kernel version SKIP (Will be further improved by following patches) # perf record -e ./test_big_program.o event syntax error: './test_big_program.o' \___ Program too big SKIP Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06perf probe: Cleanup find_perf_probe_point_from_map to reduce redundancyMasami Hiramatsu1-5/+2
In find_perf_probe_point_from_map(), the 'ret' variable is initialized with -ENOENT but overwritten by the return code of kernel_get_symbol_address_by_name(), and after that it is re-initialized with -ENOENT again. Setting ret=-ENOENT twice looks a bit redundant. This avoids the overwriting and just returns -ENOENT if some error happens to simplify the code. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-ufp1zgbktzmttcputozneomd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06perf annotate: Inform the user about objdump failures in --stdioAndi Kleen1-2/+18
When the browser fails to annotate it is difficult for users to find out what went wrong. Add some errors for objdump failures that are displayed in the UI. Note it would be even better to handle these errors smarter, like falling back to the binary when the debug info is somehow corrupted. But for now just giving a better error is an improvement. Committer note: This works for --stdio, where errors just scroll by the screen: # perf annotate --stdio intel_idle Failure running objdump --start-address=0xffffffff81418290 --stop-address=0xffffffff814183ae -l -d --no-show-raw -S -C /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 2>/dev/null|grep -v /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1|expand Percent | Source code & Disassembly of vmlinux for cycles:pp ------------------------------------------------------------------ And with that one can use that command line to try to find out more about what happened instead of getting a blank screen, an improvement. We need tho to improve this further to get it to work with other UIs, like --tui and --gtk, where it continues showing a blank screen, no messages, as the pr_err() used is enough just for --stdio. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1446779167-18949-1-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-05Merge tag 'powerpc-4.4-1' of ↵Linus Torvalds33-3/+244
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng - Refresh ps3_defconfig from Geoff Levand - Emit GNU & SysV hashes for the vdso from Michael Ellerman - Define an enum for the bolted SLB indexes from Anshuman Khandual - Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman - Add gettimeofday() benchmark from Michael Neuling - Avoid link stack corruption in __get_datapage() from Michael Neuling - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V - Add ppc64le_defconfig from Michael Ellerman - pseries: extract of_helpers module from Andy Shevchenko - Correct string length in pseries_of_derive_parent() from Nathan Fontenot - Free the MSI bitmap if it was slab allocated from Denis Kirjanov - Shorten irq_chip name for the SIU from Christophe Leroy - Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King - Disable hugepd for 64K page size, from Aneesh Kumar K.V - Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V - Make PCI non-optional for pseries from Michael Ellerman - Individual System V IPC system calls from Sam bobroff - Add selftest of unmuxed IPC calls from Michael Ellerman - discard .exit.data at runtime from Stephen Rothwell - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul Gortmaker - Use of_get_next_parent to simplify code from Christophe Jaillet - Paginate some xmon output from Sam bobroff - Add some more elements to the xmon PACA dump from Michael Ellerman - Allow the tm-syscall selftest to build with old headers from Michael Ellerman - Run EBB selftests only on POWER8 from Denis Kirjanov - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman - Avoid reference to potentially freed memory in prom.c from Christophe Jaillet - Quieten boot wrapper output with run_cmd from Geoff Levand - EEH fixes and cleanups from Gavin Shan - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman - Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov - Fix ps3-lpm white space from Rudhresh Kumar J - Fix ps3-vuart null dereference from Colin King - nvram: Add missing kfree in error path from Christophe Jaillet - nvram: Fix function name in some errors messages, from Christophe Jaillet - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov - cxl: Free virtual PHB when removing from Andrew Donnellan - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman - Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump support, a rework of the qoriq clock driver, device tree changes including qoriq fman nodes, support for a new 85xx board, and some fixes. - MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x LocalPlus Bus FIFO with its device tree binding documentation, mpc512x device tree updates and some minor fixes. * tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits) powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc() powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id() powerpc/pseries: Correct string length in pseries_of_derive_parent() powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s) powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes powerpc: handle error case in cpm_muram_alloc() powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake powerpc/book3e-64: Enable kexec powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32 powerpc/book3e-64/kexec: Enable SMP release powerpc/book3e-64/kexec: create an identity TLB mapping powerpc/book3e-64: Don't limit paca to 256 MiB powerpc/book3e/kdump: Enable crash_kexec_wait_realmode powerpc/book3e: support CONFIG_RELOCATABLE powerpc/booke64: Fix args to copy_and_flush powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts powerpc/e6500: kexec: Handle hardware threads ...
2015-11-05selftests: vm: add tests for lock on faultEric B Munson4-0/+807
Test the mmap() flag, and the mlockall() flag. These tests ensure that pages are not faulted in until they are accessed, that the pages are unevictable once faulted in, and that VMA splitting and merging works with the new VM flag. The second test ensures that mlock limits are respected. Note that the limit test needs to be run a normal user. Also add tests to use the new mlock2 family of system calls. [treding@nvidia.com: : Fix mlock2-tests for 32-bit architectures] [treding@nvidia.com: ensure the mlock2 syscall number can be found] [treding@nvidia.com: use the right arguments for main()] Signed-off-by: Eric B Munson <emunson@akamai.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: gnuplot slabifo extended statSergey Senozhatsky1-0/+275
GNUplot `slabinfo -X' stats, collected, for example, using the following command: while [ 1 ]; do slabinfo -X >> stats; sleep 1; done `slabinfo-gnuplot.sh stats' pre-processes collected records and generate graphs (totals, slabs sorted by size, slabs sorted by size). Graphs can be [individually] regenerate with different samples range and graph width-heigh (-r %d,%d and -s %d,%d options). To visually compare N `totals' graphs: slabinfo-gnuplot.sh -t FILE1-totals FILE2-totals ... FILEN-totals Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: cosmetic globals cleanupSergey Senozhatsky1-27/+27
checkpatch.pl complains about globals being explicitly zeroed out: "ERROR: do not initialise globals to 0 or NULL". New globals, introduced in this patch set, have no explicit 0 initialization; clean up the old ones to make it less hairy. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: output sizes in bytesSergey Senozhatsky1-37/+51
Introduce "-B|--Bytes" opt to disable store_size() dynamic size scaling and report size in bytes instead. This `expands' the interface a bit, it's impossible to use printf("%6s") anymore to output sizes. Example: slabinfo -X -N 2 Slabcache Totals ---------------- Slabcaches : 91 Aliases : 119->69 Active: 63 Memory used: 199798784 # Loss : 10689376 MRatio: 5% # Objects : 324301 # PartObj: 18151 ORatio: 5% Per Cache Average Min Max Total ---------------------------------------------------------------------------- #Objects 5147 1 89068 324301 #Slabs 199 1 3886 12537 #PartSlab 12 0 240 778 %PartSlab 32% 0% 100% 6% PartObjs 5 0 4569 18151 % PartObj 26% 0% 100% 5% Memory 3171409 8192 127336448 199798784 Used 3001736 160 121429728 189109408 Loss 169672 0 5906720 10689376 Per Object Average Min Max ----------------------------------------------------------- Memory 585 8 8192 User 583 8 8192 Loss 2 0 64 Slabs sorted by size -------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 127336448 3871/0/15 18 3 0 95 a dentry 89068 288 26058752 3164/0/17 28 1 0 98 a Slabs sorted by loss -------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 5906720 3871/0/15 18 3 0 95 a inode_cache 11628 864 537472 642/0/4 18 2 0 94 a Besides, store_size() does not use powers of two for G/M/K if (value > 1000000000UL) { divisor = 100000000UL; trailer = 'G'; } else if (value > 1000000UL) { divisor = 100000UL; trailer = 'M'; } else if (value > 1000UL) { divisor = 100; trailer = 'K'; } Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: introduce extended totals modeSergey Senozhatsky1-10/+44
Add "-X|--Xtotals" opt to output extended totals summary, which includes: -- totals summary -- slabs sorted by size -- slabs sorted by loss (waste) Example: ======= slabinfo --X -N 1 Slabcache Totals ---------------- Slabcaches : 91 Aliases : 120->69 Active: 65 Memory used: 568.3M # Loss : 30.4M MRatio: 5% # Objects : 920.1K # PartObj: 161.2K ORatio: 17% Per Cache Average Min Max Total --------------------------------------------------------- #Objects 14.1K 1 227.8K 920.1K #Slabs 533 1 11.7K 34.7K #PartSlab 86 0 4.3K 5.6K %PartSlab 24% 0% 100% 16% PartObjs 17 0 129.3K 161.2K % PartObj 17% 0% 100% 17% Memory 8.7M 8.1K 384.7M 568.3M Used 8.2M 160 366.5M 537.9M Loss 468.8K 0 18.2M 30.4M Per Object Average Min Max --------------------------------------------- Memory 587 8 8.1K User 584 8 8.1K Loss 2 0 64 Slabs sorted by size ---------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 211142 1736 384.7M 11732/40/10 18 3 0 95 a Slabs sorted by loss ---------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 211142 1736 18.2M 11732/40/10 18 3 0 95 a Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: fix alternate opts namesSergey Senozhatsky1-3/+5
Fix mismatches between usage() output and real opts[] options. Add missing alternative opt names, e.g., '-S' had no '--Size' opts[] entry, etc. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: sort slabs by lossSergey Senozhatsky1-4/+21
Introduce opt "-L|--sort-loss" to sort and output slabs by loss (waste) in slabcache(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: limit the number of reported slabsSergey Senozhatsky1-3/+15
Introduce opt "-N|--lines=K" to limit the number of slabs being reported in output_slabs(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05tools/vm/slabinfo: use getopt no_argument/optional_argumentSergey Senozhatsky1-17/+17
This patchset adds 'extended' slabinfo mode that provides additional information: -- totals summary -- slabs sorted by size -- slabs sorted by loss (waste) The patches also introduces several new slabinfo options to limit the number of slabs reported, sort slabs by loss (waste); and some fixes. Extended output example (slabinfo -X -N 2): Slabcache Totals ---------------- Slabcaches : 91 Aliases : 119->69 Active: 63 Memory used: 199798784 # Loss : 10689376 MRatio: 5% # Objects : 324301 # PartObj: 18151 ORatio: 5% Per Cache Average Min Max Total ---------------------------------------------------------------------------- #Objects 5147 1 89068 324301 #Slabs 199 1 3886 12537 #PartSlab 12 0 240 778 %PartSlab 32% 0% 100% 6% PartObjs 5 0 4569 18151 % PartObj 26% 0% 100% 5% Memory 3171409 8192 127336448 199798784 Used 3001736 160 121429728 189109408 Loss 169672 0 5906720 10689376 Per Object Average Min Max ----------------------------------------------------------- Memory 585 8 8192 User 583 8 8192 Loss 2 0 64 Slabs sorted by size -------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 127336448 3871/0/15 18 3 0 95 a dentry 89068 288 26058752 3164/0/17 28 1 0 98 a Slabs sorted by loss -------------------- Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg ext4_inode_cache 69948 1736 5906720 3871/0/15 18 3 0 95 a inode_cache 11628 864 537472 642/0/4 18 2 0 94 a The last patch in the series addresses Linus' comment from http://marc.info/?l=linux-mm&m=144148518703321&w=2 (well, it's been some time. sorry.) gnuplot script takes the slabinfo records file, where every record is a `slabinfo -X' output. So the basic workflow is, for example, as follows: while [ 1 ]; do slabinfo -X -N 2 >> stats; sleep 1; done ^C slabinfo-gnuplot.sh stats The last command will produce 3 png files (and 3 stats files) -- graph of slabinfo totals -- graph of slabs by size -- graph of slabs by loss It's also possible to select a range of records for plotting (a range of collected slabinfo outputs) via `-r 10,100` (for example); and compare totals from several measurements (to visially compare slabs behaviour (10,50 range)) using pre-parsed totals files: slabinfo-gnuplot.sh -r 10,50 -t stats-totals1 .. stats-totals2 This also, technically, supports ktest. Upload new slabinfo to target, collect the stats and give the resulting stats file to slabinfo-gnuplot This patch (of 8): Use getopt constants in `struct option' ->has_arg instead of numerical representations. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05perf stat: Make stat options globalJiri Olsa1-81/+82
So they can be used in perf stat record command in following patch. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Kan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1446734469-11352-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-05perf sched latency: Fix thread pid reuse issueJiri Olsa1-2/+3
The latency subcommand holds a tree of working atoms sorted by thread's pid/tid. If there's new thread with same pid and tid, the old working atom is found and assert bug condition is hit in search function: thread_atoms_search: Assertion `!(thread != atoms->thread)' failed Changing the sort function to use thread object pointers together with pid and tid check. This way new thread will never find old one with same pid/tid. Link: http://lkml.kernel.org/n/tip-o4doazhhv0zax5zshkg8hnys@git.kernel.org Reported-by: Mohit Agrawal <moagrawa@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1446462625-15807-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-05perf tools: Fix find_perf_probe_point_from_map() which incorrectly returns ↵Wang Nan1-0/+3
success It is possible that find_perf_probe_point_from_map() fails to find a symbol but still returns 0 because of an small error when coding: find_perf_probe_point_from_map() set 'ret' to error code at first, but also use it to hold return value of kernel_get_symbol_address_by_name(). This patch resets 'ret' to error even kernel_get_symbol_address_by_name() success, so if !sym, the whole function returns error correctly. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446729565-27592-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 11:59:19 +0000