| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 20d96b25cc4c ("selftests/resctrl: Fix schemata write error
check") exposed a problem in feature detection logic in MBM selftest.
If schemata does not support MB:x=x entries, the schemata write to
initialize 100% memory bandwidth allocation in mbm_setup() will now
fail with -EINVAL due to the error handling corrected by the commit
20d96b25cc4c ("selftests/resctrl: Fix schemata write error check").
That commit just uncovers the failed write, it is not wrong itself.
If MB:x=x is not supported by schemata, it is safe to assume 100%
memory bandwidth is always set. Therefore, the previously ignored error
does not make the MBM test itself wrong.
Restore the previous behavior of MBM test by checking MB support before
attempting to write it into schemata which results in behavior
equivalent to ignoring the write error.
Fixes: 20d96b25cc4c ("selftests/resctrl: Fix schemata write error check")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
resctrlfs.c contains mostly functions that interact in some way with
resctrl FS entries while functions inside resctrl_val.c deal with
measurements and benchmarking.
run_benchmark() is located in resctrlfs.c even though it's purpose
is not interacting with the resctrl FS but to execute cache checking
logic.
Move run_benchmark() to resctrl_val.c just before resctrl_val() that
makes use of run_benchmark(). Make run_benchmark() static since it's
not used between multiple files anymore.
Remove return comment from kernel-doc since the function is type void.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Writing bitmasks to the schemata can fail when the bitmask doesn't
adhere to constraints defined by what a particular CPU supports.
Some example of constraints are max length or having contiguous bits.
The driver should properly return errors when any rule concerning
bitmask format is broken.
Resctrl FS returns error codes from fprintf() only when fclose() is
called. Current error checking scheme allows invalid bitmasks to be
written into schemata file and the selftest doesn't notice because the
fclose() error code isn't checked.
Substitute fopen(), flose() and fprintf() with open(), close() and
write() to avoid error code buffering between fprintf() and fclose().
Remove newline character from the schema string after writing it to
the schemata file so it prints correctly before function return.
Pass the string generated with strerror() to the "reason" buffer so
the error message is more verbose. Extend "reason" buffer so it can hold
longer messages.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in
commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting
format") was "randomly chosen value" (as admitted by the changelog).
When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.
Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.
Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The MBA and CMT tests expect support of other features to be able to
run.
When platform only supports MBA but not MBM, MBA test will fail with:
Failed to open total bw file: No such file or directory
When platform only supports CMT but not CAT, CMT test will fail with:
Failed to open bit mask file '/sys/fs/resctrl/info/L3/cbm_mask': No such file or directory
It leads to the test reporting test fail (even if no test was run at
all).
Extend feature checks to cover these two conditions to show these tests
were skipped rather than failed.
Fixes: ee0415681eb6 ("selftests/resctrl: Use resctrl/info for feature detection")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Refactor feature check to use resource and feature name
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Feature check in validate_resctrl_feature_request() takes in the test
name string and maps that to what to check per test.
Pass resource and feature names to validate_resctrl_feature_request()
directly rather than deriving them from the test name inside the
function which makes the feature check easier to extend for new test
cases.
Use !! in the return statement to make the boolean conversion more
obvious even if it is not strictly necessary from correctness point of
view (to avoid it looking like the function is returning a freed
pointer).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Remove duplicate feature check from CMT test
Cc: <stable@vger.kernel.org> # selftests/resctrl: Move _GNU_SOURCE define into Makefile
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.
It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.
Remove the duplicated feature check for CMT from cmt_resctrl_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit caddc0fbe495 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.
Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().
Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.
Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.
Fixes: caddc0fbe495 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
signal_handler_unregister() calls sigaction() with uninitializing
sa_flags in the struct sigaction.
Make sure sa_flags is always initialized in signal_handler_unregister()
by initializing the struct sigaction when declaring it. Also add the
initialization to signal_handler_register() even if there are no know
bugs in there because correctness is then obvious from the code itself.
Fixes: 73c55fa5ab55 ("selftests/resctrl: Commonize the signal handler register/unregister for all tests")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark argument is handled by custom argument parsing code which is
more complicated than it needs to be.
Process benchmark argument within the normal getopt() handling and drop
unnecessary ben_ind and has_ben variables. When -b is given, terminate
the argument processing as -b consumes all remaining arguments.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ben_count is only used to write the terminator for the list. It is
enough to use i from the loop so no need for another variable.
Remove ben_count variable as it is not needed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.
Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.
CMT test has to create a copy of the benchmark command before altering
the benchmark command.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark command is initialized before resctrl FS check and
preparation code that can call ksft_exit_skip(). There is no strong
reason why the resctrl FS support check and unmounting it (if already
mounted), has to be done after the benchmark command initialization.
Move benchmark command initialization such that it is done not until
right before the tests commence. This simplifies rollback handling when
benchmark command initialization starts to use dynamic allocation (in a
change following this).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().
Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.
Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark command must be the last argument because it consumes all the
remaining arguments but help misleadingly shows it as the first
argument. The benchmark command is also shown in quotes but it does not
match with the code.
Correct -b argument place in the help message and remove the quotes.
Tweak also how the options are presented by using ... notation.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.
Return error in case the benchmark command does not fit to the space
allocated for it.
Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Compiling resctrl selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in show_cache_info().
The format specifier used expects a variable of type int but a long
unsigned int variable is passed instead.
Change the format specifier to match the passed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
cat_val() is only used during CAT test but it checks for test type.
Remove test type checks and the unused else branch from cat_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Results include warm-up test which is discarded before passing the sum
to show_cache_info(). show_cache_info() handles this by subtracting one
from the number of tests in divisor. It is a trappy construct to have
sum and number of tests parameters to disagree like this.
A more logical place for subtracting the skipped tests is where the sum
is calculated so move it there. Pass the correct number of tests to
show_cache_info() so it can be used directly as the divisor for
calculating the average.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CAT and CMT tests have count_of_bits, long_mask, cbm_mask, and
cache_size global variables that can be moved into the sole using
function.
Make the global variables local variables of the relevant function to
scope them better.
While at it, move cache_size initialization into the declaration line.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
struct resctrl_val_param has ->setup() function that accepts variable
argument list. All test cases use only 1 argument as input and it's
the struct resctrl_val_param pointer.
Instead of variable argument list, directly pass struct
resctrl_val_param pointer as the only parameter to ->setup().
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Test name is passed to fill_buf functions so that they can loop around
buffer only once. This is required for CAT test case.
To loop around buffer only once, caller doesn't need to let fill_buf
know which test case it is. Instead, pass a boolean argument 'once'
which makes fill_buf more generic.
As run_benchmark() no longer needs to pass the test name to
run_fill_buf(), a few test running functions can be simplified to not
write the test name into the default benchmark_cmd. The has_ben
argument can also be removed now from those test running functions.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
fill_buf's arguments can be improved in multiple ways:
- Multiple functions in fill_buf have start_ptr as one of their
argument which is a bit long and the extra "start" is pretty
obvious when it comes to pointers.
- Some of the functions take end_ptr and others size_t to indicate
the end of the buffer.
- Some arguments meaning buffer size are called just 's'
- mem_flush() takes void * but immediately converts it to char *
Cleanup the parameters to make things simpler and more consistent:
- Rename start_ptr to simply buf as it's shorter.
- Replace end_ptr and s parameters with buf_size and only calculate
end_ptr in the functions that truly use it.
- Make mem_flush() parameters to follow the same convention as the
other functions in fill_buf.
- convert mem_flush() char * to unsigned char *.
While at it, fix also a typo in a comment.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
fill_buf stores buffer pointer into global variable startptr that is
only used in fill_cache().
Remove startptr as global variable, the local variable in fill_cache()
is enough to keep the pointer.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
run_fill_buf()'s malloc_and_init_memory parameter is always 1. There's
also duplicated memory init code for malloc_and_init_memory == 0 case
in fill_buf() which is unused.
Remove the malloc_and_init_memory parameter and the duplicated mem init
code.
While at it, fix also a typo in run_fill_buf() prototype's argument.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When no benchmark_cmd is given, benchmark_cmd[1] is set to span in
main(). There's no need to do it again in run_mba_test().
Remove the duplicated preparation for span argument into
benchmark_cmd[1] from run_mba_test(). After this, the has_ben and span
arguments to run_mba_test() can be removed.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
MBA and MBM tests to use megabytes to represent span. CMT test uses
bytes. The difference requires run_benchmark() to size the buffer
differently based on the test name, which in turn requires passing the
test name into run_benchmark().
Convert MBA and MBM tests to use span internally in bytes like CMT test
to remove the internal inconsistency between the tests. Remove the test
dependent buffer sizing from run_benchmark().
This change eliminates one of the reasons why the test name has to be
passed around but there are still other users too so the test name
passing cannot yet be removed.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Span is defined either as unsigned long or int.
Consistently use size_t everywhere for span as it refers to size of the
memory block.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Resctrl FS mount/umount are now cleanly paired leaving .mum_resctrlfs
in the struct resctrl_val_param unused.
Remove .mum_resctrlfs from struct resctrl_val_param.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
mount_resctrl()
Mount/umount of the resctrl FS is now paired nicely per test.
Rename remount_resctrl(bool mum_resctrlfs) to mount_resctrl(). Make
it unconditionally try to mount the resctrl FS and return error if
resctrl FS was mounted already.
While at it, group the mount/umount prototypes in the header.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A few places currently lack umounting resctrl FS on error paths:
- cmt_resctrl_val() has multiple error paths with direct return.
- cat_perf_miss_val() has multiple error paths with direct return.
In addition, validate_resctrl_feature_request() is called by
run_mbm_test() and run_mba_test(). Neither MBA nor MBM test tries to
umount resctrl FS.
Each and every test does require resctrl FS to be present already for
feature check. Thus, it makes sense to just mount it on higher level in
resctrl_tests.c and properly pair it with umount.
Move resctrl FS (re)mount/unmount into each test function in
resctrl_tests.c. Make feature validation to simply check that resctrl
FS is mounted.
As there's the final umount in main() before this change, the selftest
should not leave resctrl FS behind after the tests even if one of the
forementioned paths is taken (thus, no fixes tag).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Resctrl FS mount/remount/umount code is hard to track. Better approach
is to use mount/umount pair for each test but that assumes resctrl FS
is not mounted beforehand.
Change umount_resctrlfs() so that it can unmount resctrl FS from any
path, and enable further simplifications into mount/remount/umount
logic by unmounting resctrl FS at the start if a pre-existing
mountpoint is found.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error.
Close fd_lm only in cat_val() to make it easier to track it is always
closed.
Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A child calls PARENT_EXIT() when it fails to run a benchmark to kill
the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and
the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The error path in fill_cache() does return before the allocated buffer
is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors
in commit c7b607fa9325 ("selftests/resctrl: Fix null pointer
dereference on open failed"), before that both fill functions always
returned 0.
Move free() earlier to prevent the mem leak.
Fixes: c7b607fa9325 ("selftests/resctrl: Fix null pointer dereference on open failed")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Makefile only lists *.c as build dependencies for the resctrl_tests
executable which excludes resctrl.h.
Add *.h to wildcard() to include resctrl.h.
Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
An error snuck in between two recent conflicting changes:
Until recently ->setup() used negative values to indicate
normal test termination. This was changed in
commit fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return
errors") that transitioned ->setup() to use negative values
to indicate errors and a new END_OF_TESTS to indicate normal
termination.
commit 42e3b093eb7c ("selftests/resctrl: Fix set up schemata with 100%
allocation on first run in MBM test") continued to use
negative return to indicate normal test termination.
Fix mbm_setup() to use the new END_OF_TESTS to indicate
error-free test termination.
Fixes: 42e3b093eb7c ("selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test")
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/lkml/bb65cce8-54d7-68c5-ef19-3364ec95392a@linux.intel.com/
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Before exiting each test function(run_cmt/cat/mbm/mba_test()),
test results("ok","not ok") are printed by ksft_test_result() and then
temporary result files are cleaned by function
cmt/cat/mbm/mba_test_cleanup().
However, before running ksft_test_result(),
function cmt/cat/mbm/mba_test_cleanup()
has been run in each test function as follows:
cmt_resctrl_val()
cat_perf_miss_val()
mba_schemata_change()
mbm_bw_change()
Remove duplicate codes that clear each test result file,
while ensuring cleanup properly even when errors occur in each test.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
tests
After creating a child process with fork() in CAT test, if a signal such
as SIGINT is received, the parent process will be terminated immediately,
and therefore the child process will not be killed and also resctrlfs is
not unmounted.
There is a signal handler registered in CMT/MBM/MBA tests, which kills
child process, unmount resctrlfs, cleanups result files, etc., if a
signal such as SIGINT is received.
Commonize the signal handler registered for CMT/MBM/MBA tests and
reuse it in CAT.
To reuse the signal handler to kill child process use global bm_pid
instead of local bm_pid.
Also, since the MBA/MBA/CMT/CAT are run in order, unregister the signal
handler at the end of each test so that the signal handler cannot be
inherited by other tests.
Reviewed-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After creating a child process with fork() in CAT test, if an error
occurs when parent process runs cat_val() or check_results(), the child
process will not be killed and also resctrlfs is not unmounted. Also if
an error occurs when child process runs cat_val() or check_results(),
the parent process will wait for the pipe message from the child process
which will never be sent by the child process and the parent process
cannot proceed to unmount resctrlfs.
Synchronize the exits between the parent and child. An error could
occur whether in parent process or child process. The parent process
always kills the child process and runs umount_resctrlfs(). The
child process always waits to be killed by the parent process.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When a process has buffered output, a child process created by fork()
will also copy buffered output. When using kselftest framework,
the output (resctrl test result message) will be printed multiple times.
Add fflush() to flush out the buffered output before executing fork().
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since MBA check result is not returned, the MBA test result message
is always output as "ok" regardless of whether the MBA check result is
true or false.
Make output message to be "not ok" if MBA check result is failed.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
MBM test
There is a comment "Set up shemata with 100% allocation on the first run"
in function mbm_setup(), but there is an increment bug and the condition
"num_of_runs == 0" will never be met and write_schemata() will never be
called to set schemata to 100%. Even if write_schemata() is called in MBM
test, since it is not supported for MBM test it does not set the schemata.
This is currently fine because resctrl_val_parm->mum_resctrlfs is always 1
and umount/mount will be run in each test to set the schemata to 100%.
To support the usage when MBM test does not unmount/remount resctrl
filesystem before the test starts, fix to call write_schemata() and
set schemata properly when the function is called for the first time.
Also, remove static local variable 'num_of_runs' because this is not
needed as there is resctrl_val_param->num_of_runs which should be used
instead like in cat_setup().
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Use ksft_finished() after running tests so that resctrl_tests doesn't
return exit code 0 when tests fail.
Consequently, report the MBA and MBM tests as skipped when running on
non-Intel hardware, otherwise resctrl_tests will exit with a failure
code.
Signed-off-by: Peter Newman <peternewman@google.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
get_llc_perf() function comment refers to cpu_no parameter that does
not exist.
Correct get_llc_perf() the comment to document llc_perf_miss instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
remount_resctrlfs() accepts a boolean value as an argument. Some tests
pass 0/1 and some tests pass true/false.
Make all the callers of remount_resctrlfs() use true/false so that the
parameter usage is consistent across tests.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CBM_MASK_PATH is actually the path to resctrl/info.
Change the macro name to correctly indicate what it represents.
[ ij: Tweaked the changelog. ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
initialize_llc_perf() unconditionally returns 0.
initialize_llc_perf() performs only memory initialization, none of
which can fail.
Change the return type from int to void to accurately reflect that its
return value doesn't need to be checked. Remove the error checking from
the only callsite.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
