summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf/progs
AgeCommit message (Collapse)AuthorFilesLines
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds46-98/+2228
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-09-29selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)Martin KaFai Lau1-8/+17
This patch changes the bpf_dctcp test to ensure the recurred bpf_setsockopt(TCP_CONGESTION) returns -EBUSY. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20220929070407.965581-6-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-28selftests/bpf: Test parameterized task BPF iterators.Kui-Feng Lee4-2/+60
Test iterators of vma, files and tasks. Ensure the API works appropriately to visit all tasks, tasks in a process, or a particular task. Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20220926184957.208194-5-kuifeng@fb.com
2022-09-26selftests/bpf: Fix get_func_ip offset test for CONFIG_X86_KERNEL_IBTJiri Olsa1-11/+12
With CONFIG_X86_KERNEL_IBT enabled the test for kprobe with offset won't work because of the extra endbr instruction. As suggested by Andrii adding CONFIG_X86_KERNEL_IBT detection and using appropriate offset value based on that. Also removing test7 program, because it does the same as test6. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220926153340.1621984-7-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-26bpf: Return value in kprobe get_func_ip only for entry addressJiri Olsa1-2/+2
Changing return value of kprobe's version of bpf_get_func_ip to return zero if the attach address is not on the function's entry point. For kprobes attached in the middle of the function we can't easily get to the function address especially now with the CONFIG_X86_KERNEL_IBT support. If user cares about current IP for kprobes attached within the function body, they can get it with PT_REGS_IP(ctx). Suggested-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220926153340.1621984-6-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-26bpf: Adjust kprobe_multi entry_ip for CONFIG_X86_KERNEL_IBTJiri Olsa1-3/+1
Martynas reported bpf_get_func_ip returning +4 address when CONFIG_X86_KERNEL_IBT option is enabled. When CONFIG_X86_KERNEL_IBT is enabled we'll have endbr instruction at the function entry, which screws return value of bpf_get_func_ip() helper that should return the function address. There's short term workaround for kprobe_multi bpf program made by Alexei [1], but we need this fixup also for bpf_get_attach_cookie, that returns cookie based on the entry_ip value. Moving the fixup in the fprobe handler, so both bpf_get_func_ip and bpf_get_attach_cookie get expected function address when CONFIG_X86_KERNEL_IBT option is enabled. Also renaming kprobe_multi_link_handler entry_ip argument to fentry_ip so it's clearer this is an ftrace __fentry__ ip. [1] commit 7f0059b58f02 ("selftests/bpf: Fix kprobe_multi test.") Cc: Peter Zijlstra <peterz@infradead.org> Reported-by: Martynas Pumputis <m@lambda.lt> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220926153340.1621984-5-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-23selftests/bpf: Simplify cgroup_hierarchical_stats selftestYosry Ahmed1-126/+55
The cgroup_hierarchical_stats selftest is complicated. It has to be, because it tests an entire workflow of recording, aggregating, and dumping cgroup stats. However, some of the complexity is unnecessary. The test now enables the memory controller in a cgroup hierarchy, invokes reclaim, measure reclaim time, THEN uses that reclaim time to test the stats collection and aggregation. We don't need to use such a complicated stat, as the context in which the stat is collected is orthogonal. Simplify the test by using a simple stat instead of reclaim time, the total number of times a process has ever entered a cgroup. This makes the test simpler and removes the dependency on the memory controller and the memory reclaim interface. Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20220919175330.890793-1-yosryahmed@google.com
2022-09-21selftests/bpf: add tests for bpf_ct_set_nat_info kfuncLorenzo Bianconi1-0/+27
Introduce self-tests for bpf_ct_set_nat_info kfunc used to set the source or destination nat addresses/ports. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/803e33294e247744d466943105879414344d3235.1663778601.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-21selftests/bpf: Add tests for dynamic pointers parameters in kfuncsRoberto Sassu1-0/+94
Add tests to ensure that only supported dynamic pointer types are accepted, that the passed argument is actually a dynamic pointer, that the passed argument is a pointer to the stack, and that bpf_verify_pkcs7_signature() correctly handles dynamic pointers with data set to NULL. The tests are currently in the deny list for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220920075951.929132-14-roberto.sassu@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-21selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfuncRoberto Sassu1-0/+90
Perform several tests to ensure the correct implementation of the bpf_verify_pkcs7_signature() kfunc. Do the tests with data signed with a generated testing key (by using sign-file from scripts/) and with the tcp_bic.ko kernel module if it is found in the system. The test does not fail if tcp_bic.ko is not found. First, perform an unsuccessful signature verification without data. Second, perform a successful signature verification with the session keyring and a new one created for testing. Then, ensure that permission and validation checks are done properly on the keyring provided to bpf_verify_pkcs7_signature(), despite those checks were deferred at the time the keyring was retrieved with bpf_lookup_user_key(). The tests expect to encounter an error if the Search permission is removed from the keyring, or the keyring is expired. Finally, perform a successful and unsuccessful signature verification with the keyrings with pre-determined IDs (the last test fails because the key is not in the platform keyring). The test is currently in the deny list for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/r/20220920075951.929132-13-roberto.sassu@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-21selftests/bpf: Add additional tests for bpf_lookup_*_key()Roberto Sassu1-0/+46
Add a test to ensure that bpf_lookup_user_key() creates a referenced special keyring when the KEY_LOOKUP_CREATE flag is passed to this function. Ensure that the kfunc rejects invalid flags. Ensure that a keyring can be obtained from bpf_lookup_system_key() when one of the pre-determined keyring IDs is provided. The test is currently blacklisted for s390x (JIT does not support calling kernel function). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/r/20220920075951.929132-12-roberto.sassu@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-21selftests/bpf: Add selftests validating the user ringbufDavid Vernet3-0/+430
This change includes selftests that validate the expected behavior and APIs of the new BPF_MAP_TYPE_USER_RINGBUF map type. Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220920000100.477320-5-void@manifault.com
2022-09-16selftests/bpf: Fix test_verif_scale{1,3} SEC() annotationsAndrii Nakryiko2-2/+2
Use proper SEC("tc") for test_verif_scale{1,3} programs. It's not a problem for selftests right now because we manually set type programmatically, but not having correct SEC() definitions makes it harded to generically load BPF object files. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220909193053.577111-2-andrii@kernel.org
2022-09-10selftests/bpf: fix ct status check in bpf_nf selftestsLorenzo Bianconi1-3/+4
Check properly the connection tracking entry status configured running bpf_ct_change_status kfunc. Remove unnecessary IPS_CONFIRMED status configuration since it is already done during entry allocation. Fixes: 6eb7fba007a7 ("selftests/bpf: Add tests for new nf_conntrack kfuncs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/813a5161a71911378dfac8770ec890428e4998aa.1662623574.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-10selftests/bpf: Add tests for writing to nf_conn:markDaniel Xu2-2/+21
Add a simple extension to the existing selftest to write to nf_conn:mark. Also add a failure test for writing to unsupported field. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/f78966b81b9349d2b8ebb4cee2caf15cb6b38ee2.1662568410.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-09selftests/bpf: Ensure cgroup/connect{4,6} programs can bind unpriv ICMP pingYiFei Zhu1-0/+53
This tests that when an unprivileged ICMP ping socket connects, the hooks are actually invoked. We also ensure that if the hook does not call bpf_bind(), the bound address is unmodified, and if the hook calls bpf_bind(), the bound address is exactly what we provided to the helper. A new netns is used to enable ping_group_range in the test without affecting ouside of the test, because by default, not even root is permitted to use unprivileged ICMP ping... Signed-off-by: YiFei Zhu <zhuyifei@google.com> Link: https://lore.kernel.org/r/086b227c1b97f4e94193e58aae7576d0261b68a4.1662682323.git.zhuyifei@google.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-09-07selftests/bpf: Add tests for kfunc returning a memory pointerBenjamin Tissoires2-0/+154
We add 2 new kfuncs that are following the RET_PTR_TO_MEM capability from the previous commit. Then we test them in selftests: the first tests are testing valid case, and are not failing, and the later ones are actually preventing the program to be loaded because they are wrong. To work around that, we mark the failing ones as not autoloaded (with SEC("?tc")), and we manually enable them one by one, ensuring the verifier rejects them. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220906151303.2780789-8-benjamin.tissoires@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-07selftests/bpf: add test for accessing ctx from syscall program typeBenjamin Tissoires2-0/+77
We need to also export the kfunc set to the syscall program type, and then add a couple of eBPF programs that are testing those calls. The first one checks for valid access, and the second one is OK from a static analysis point of view but fails at run time because we are trying to access outside of the allocated memory. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220906151303.2780789-5-benjamin.tissoires@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-06selftests/bpf: Use BPF_PROG2 for some fentry programs without struct argumentsYonghong Song1-2/+2
Use BPF_PROG2 instead of BPF_PROG for programs in progs/timer.c to test BPF_PROG2 for cases without struct arguments. Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220831152718.2081091-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-06selftests/bpf: Add struct argument tests with fentry/fexit programs.Yonghong Song1-0/+120
Add various struct argument tests with fentry/fexit programs. Also add one test with a kernel func which does not have any argument to test BPF_PROG2 macro in such situation. Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220831152713.2080039-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-05bpf: Optimize call_rcu in non-preallocated hash map.Alexei Starovoitov1-11/+0
Doing call_rcu() million times a second becomes a bottle neck. Convert non-preallocated hash map from call_rcu to SLAB_TYPESAFE_BY_RCU. The rcu critical section is no longer observed for one htab element which makes non-preallocated hash map behave just like preallocated hash map. The map elements are released back to kernel memory after observing rcu critical section. This improves 'map_perf_test 4' performance from 100k events per second to 250k events per second. bpf_mem_alloc + percpu_counter + typesafe_by_rcu provide 10x performance boost to non-preallocated hash map and make it within few % of preallocated map while consuming fraction of memory. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-8-alexei.starovoitov@gmail.com
2022-09-02selftest/bpf: Add test for bpf_getsockopt()Martin KaFai Lau2-106/+43
This patch removes the __bpf_getsockopt() which directly reads the sk by using PTR_TO_BTF_ID. Instead, the test now directly uses the kernel bpf helper bpf_getsockopt() which supports all the required optname now. TCP_SAVE[D]_SYN and TCP_MAXSEG are not tested in a loop for all the hooks and sock_ops's cb. TCP_SAVE[D]_SYN only works in passive connection. TCP_MAXSEG only works when it is setsockopt before the connection is established and the getsockopt return value can only be tested after the connection is established. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20220902002937.2896904-1-kafai@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-02selftests/bpf: Store BPF object files with .bpf.o extensionDaniel Müller1-4/+4
BPF object files are, in a way, the final artifact produced as part of the ahead-of-time compilation process. That makes them somewhat special compared to "regular" object files, which are a intermediate build artifacts that can typically be removed safely. As such, it can make sense to name them differently to make it easier to spot this difference at a glance. Among others, libbpf-bootstrap [0] has established the extension .bpf.o for BPF object files. It seems reasonable to follow this example and establish the same denomination for selftest build artifacts. To that end, this change adjusts the corresponding part of the build system and the test programs loading BPF object files to work with .bpf.o files. [0] https://github.com/libbpf/libbpf-bootstrap Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220901222253.1199242-1-deso@posteo.net
2022-09-02selftests/bpf: Amend test_tunnel to exercise BPF_F_TUNINFO_FLAGSShmulik Ladkani1-8/+16
Get the tunnel flags in {ipv6}vxlan_get_tunnel_src and ensure they are aligned with tunnel params set at {ipv6}vxlan_set_tunnel_dst. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220831144010.174110-2-shmulik.ladkani@gmail.com
2022-09-01selftests/bpf: Test concurrent updates on bpf_task_storage_busyHou Tao1-0/+39
Under full preemptible kernel, task local storage lookup operations on the same CPU may update per-cpu bpf_task_storage_busy concurrently. If the update of bpf_task_storage_busy is not preemption safe, the final value of bpf_task_storage_busy may become not-zero forever and bpf_task_storage_trylock() will always fail. So add a test case to ensure the update of bpf_task_storage_busy is preemption safe. Will skip the test case when CONFIG_PREEMPT is disabled, and it can only reproduce the problem probabilistically. By increasing TASK_STORAGE_MAP_NR_LOOP and running it under ARM64 VM with 4-cpus, it takes about four rounds to reproduce: > test_maps is modified to only run test_task_storage_map_stress_lookup() $ export TASK_STORAGE_MAP_NR_THREAD=256 $ export TASK_STORAGE_MAP_NR_LOOP=81920 $ export TASK_STORAGE_MAP_PIN_CPU=1 $ time ./test_maps test_task_storage_map_stress_lookup(135):FAIL:bad bpf_task_storage_busy got -2 real 0m24.743s user 0m6.772s sys 0m17.966s Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20220901061938.3789460-5-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-08-31selftests/bpf: Add test cases for htab updateHou Tao1-0/+29
One test demonstrates the reentrancy of hash map update on the same bucket should fail, and another one shows concureently updates of the same hash map bucket should succeed and not fail due to the reentrancy checking for bucket lock. There is no trampoline support on s390x, so move htab_update to denylist. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20220831042629.130006-4-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-08-31selftest/bpf: Ensure no module loading in bpf_setsockopt(TCP_CONGESTION)Martin KaFai Lau1-0/+4
This patch adds a test to ensure bpf_setsockopt(TCP_CONGESTION, "not_exist") will not trigger the kernel module autoload. Before the fix: [ 40.535829] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [...] [ 40.552134] tcp_ca_find_autoload.constprop.0+0xcb/0x200 [ 40.552689] tcp_set_congestion_control+0x99/0x7b0 [ 40.553203] do_tcp_setsockopt+0x3ed/0x2240 [...] [ 40.556041] __bpf_setsockopt+0x124/0x640 Signed-off-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220830231953.792412-1-martin.lau@linux.dev
2022-08-29selftests/bpf: Fix connect4_prog tcp/socket header type conflictJames Hilliard1-2/+3
There is a potential for us to hit a type conflict when including netinet/tcp.h and sys/socket.h, we can replace both of these includes with linux/tcp.h and bpf_tcp_helpers.h to avoid this conflict. Fixes errors like the below when compiling with gcc BPF backend: In file included from /usr/include/netinet/tcp.h:91, from progs/connect4_prog.c:11: /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char' 34 | typedef __INT8_TYPE__ int8_t; | ^~~~~~ In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155, from /usr/include/x86_64-linux-gnu/bits/socket.h:29, from /usr/include/x86_64-linux-gnu/sys/socket.h:33, from progs/connect4_prog.c:10: /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'} 24 | typedef __int8_t int8_t; | ^~~~~~ /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int' 43 | typedef __INT64_TYPE__ int64_t; | ^~~~~~~ /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'} 27 | typedef __int64_t int64_t; | ^~~~~~~ Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220829154710.3870139-1-james.hilliard1@gmail.com
2022-08-29selftests/bpf: Fix bind{4,6} tcp/socket header type conflictJames Hilliard2-4/+0
There is a potential for us to hit a type conflict when including netinet/tcp.h with sys/socket.h, we can remove these as they are not actually needed. Fixes errors like the below when compiling with gcc BPF backend: In file included from /usr/include/netinet/tcp.h:91, from progs/bind4_prog.c:10: /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char' 34 | typedef __INT8_TYPE__ int8_t; | ^~~~~~ In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155, from /usr/include/x86_64-linux-gnu/bits/socket.h:29, from /usr/include/x86_64-linux-gnu/sys/socket.h:33, from progs/bind4_prog.c:9: /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'} 24 | typedef __int8_t int8_t; | ^~~~~~ /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int' 43 | typedef __INT64_TYPE__ int64_t; | ^~~~~~~ /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'} 27 | typedef __int64_t int64_t; | ^~~~~~~ make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/bind4_prog.o] Error 1 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220826052925.980431-1-james.hilliard1@gmail.com
2022-08-26selftests/bpf: Declare subprog_noise as static in tailcall_bpf2bpf4James Hilliard1-1/+1
Due to bpf_map_lookup_elem being declared static we need to also declare subprog_noise as static. Fixes the following error: progs/tailcall_bpf2bpf4.c:26:9: error: 'bpf_map_lookup_elem' is static but used in inline function 'subprog_noise' which is not static [-Werror] 26 | bpf_map_lookup_elem(&nop_table, &key); | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20220826035141.737919-1-james.hilliard1@gmail.com
2022-08-26selftests/bpf: fix type conflict in test_tc_dtimeJames Hilliard1-1/+0
The sys/socket.h header isn't required to build test_tc_dtime and may cause a type conflict. Fixes the following error: In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155, from /usr/include/x86_64-linux-gnu/bits/socket.h:29, from /usr/include/x86_64-linux-gnu/sys/socket.h:33, from progs/test_tc_dtime.c:18: /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: error: conflicting types for 'int8_t'; have '__int8_t' {aka 'signed char'} 24 | typedef __int8_t int8_t; | ^~~~~~ In file included from progs/test_tc_dtime.c:5: /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'char'} 34 | typedef __INT8_TYPE__ int8_t; | ^~~~~~ /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: error: conflicting types for 'int64_t'; have '__int64_t' {aka 'long long int'} 27 | typedef __int64_t int64_t; | ^~~~~~~ /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long int'} 43 | typedef __INT64_TYPE__ int64_t; | ^~~~~~~ make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/test_tc_dtime.o] Error 1 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20220826050703.869571-1-james.hilliard1@gmail.com Signed-off-by: Martin KaFai Lau <kafai@fb.com>
2022-08-25selftests/bpf: add a selftest for cgroup hierarchical stats collectionYosry Ahmed1-0/+226
Add a selftest that tests the whole workflow for collecting, aggregating (flushing), and displaying cgroup hierarchical stats. TL;DR: - Userspace program creates a cgroup hierarchy and induces memcg reclaim in parts of it. - Whenever reclaim happens, vmscan_start and vmscan_end update per-cgroup percpu readings, and tell rstat which (cgroup, cpu) pairs have updates. - When userspace tries to read the stats, vmscan_dump calls rstat to flush the stats, and outputs the stats in text format to userspace (similar to cgroupfs stats). - rstat calls vmscan_flush once for every (cgroup, cpu) pair that has updates, vmscan_flush aggregates cpu readings and propagates updates to parents. - Userspace program makes sure the stats are aggregated and read correctly. Detailed explanation: - The test loads tracing bpf programs, vmscan_start and vmscan_end, to measure the latency of cgroup reclaim. Per-cgroup readings are stored in percpu maps for efficiency. When a cgroup reading is updated on a cpu, cgroup_rstat_updated(cgroup, cpu) is called to add the cgroup to the rstat updated tree on that cpu. - A cgroup_iter program, vmscan_dump, is loaded and pinned to a file, for each cgroup. Reading this file invokes the program, which calls cgroup_rstat_flush(cgroup) to ask rstat to propagate the updates for all cpus and cgroups that have updates in this cgroup's subtree. Afterwards, the stats are exposed to the user. vmscan_dump returns 1 to terminate iteration early, so that we only expose stats for one cgroup per read. - An ftrace program, vmscan_flush, is also loaded and attached to bpf_rstat_flush. When rstat flushing is ongoing, vmscan_flush is invoked once for each (cgroup, cpu) pair that has updates. cgroups are popped from the rstat tree in a bottom-up fashion, so calls will always be made for cgroups that have updates before their parents. The program aggregates percpu readings to a total per-cgroup reading, and also propagates them to the parent cgroup. After rstat flushing is over, all cgroups will have correct updated hierarchical readings (including all cpus and all their descendants). - Finally, the test creates a cgroup hierarchy and induces memcg reclaim in parts of it, and makes sure that the stats collection, aggregation, and reading workflow works as expected. Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220824233117.1312810-6-haoluo@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25selftests/bpf: Test cgroup_iter.Hao Luo2-0/+46
Add a selftest for cgroup_iter. The selftest creates a mini cgroup tree of the following structure: ROOT (working cgroup) | PARENT / \ CHILD1 CHILD2 and tests the following scenarios: - invalid cgroup fd. - pre-order walk over descendants from PARENT. - post-order walk over descendants from PARENT. - walk of ancestors from PARENT. - process only a single object (i.e. PARENT). - early termination. Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220824233117.1312810-3-haoluo@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24selftests/bpf: Fix wrong size passed to bpf_setsockopt()Yang Yingliang1-3/+7
sizeof(new_cc) is not real memory size that new_cc points to; introduce a new_cc_len to store the size and then pass it to bpf_setsockopt(). Fixes: 31123c0360e0 ("selftests/bpf: bpf_setsockopt tests") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220824013907.380448-1-yangyingliang@huawei.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24selftests/bpf: Add tests for reference state fixes for callbacksKumar Kartikeya Dwivedi1-0/+116
These are regression tests to ensure we don't end up in invalid runtime state for helpers that execute callbacks multiple times. It exercises the fixes to verifier callback handling for reference state in previous patches. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220823013226.24988-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-23selftests/bpf: Make sure bpf_{g,s}et_retval is exposed everywhereStanislav Fomichev1-0/+16
For each hook, have a simple bpf_set_retval(bpf_get_retval) program and make sure it loads for the hooks we want. The exceptions are the hooks which don't propagate the error to the callers: - sockops - recvmsg - getpeername - getsockname - cg_skb ingress and egress Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20220823222555.523590-6-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-23bpf, selftests: Test BPF_FLOW_DISSECTOR_CONTINUEShmulik Ladkani1-0/+15
The dissector program returns BPF_FLOW_DISSECTOR_CONTINUE (and avoids setting skb->flow_keys or last_dissection map) in case it encounters IP packets whose (outer) source address is 127.0.0.127. Additional test is added to prog_tests/flow_dissector.c which sets this address as test's pkk.iph.saddr, with the expected retval of BPF_FLOW_DISSECTOR_CONTINUE. Also, legacy test_flow_dissector.sh was similarly augmented. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220821113519.116765-5-shmulik.ladkani@gmail.com
2022-08-18selftests/bpf: bpf_setsockopt testsMartin KaFai Lau2-1/+481
This patch adds tests to exercise optnames that are allowed in bpf_setsockopt(). Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20220817061847.4182339-1-kafai@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-17Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski8-34/+153
Andrii Nakryiko says: ==================== bpf-next 2022-08-17 We've added 45 non-merge commits during the last 14 day(s) which contain a total of 61 files changed, 986 insertions(+), 372 deletions(-). The main changes are: 1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt Kanzenbach and Jesper Dangaard Brouer. 2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko. 3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov. 4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires. 5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle unsupported names on old kernels, from Hangbin Liu. 6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton, from Hao Luo. 7) Relax libbpf's requirement for shared libs to be marked executable, from Henqgi Chen. 8) Improve bpf_iter internals handling of error returns, from Hao Luo. 9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard. 10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong. 11) bpftool improvements to handle full BPF program names better, from Manu Bretelle. 12) bpftool fixes around libcap use, from Quentin Monnet. 13) BPF map internals clean ups and improvements around memory allocations, from Yafang Shao. 14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup iterator to work on cgroupv1, from Yosry Ahmed. 15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong. 16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits) selftests/bpf: Few fixes for selftests/bpf built in release mode libbpf: Clean up deprecated and legacy aliases libbpf: Streamline bpf_attr and perf_event_attr initialization libbpf: Fix potential NULL dereference when parsing ELF selftests/bpf: Tests libbpf autoattach APIs libbpf: Allows disabling auto attach selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm libbpf: Making bpf_prog_load() ignore name if kernel doesn't support selftests/bpf: Update CI kconfig selftests/bpf: Add connmark read test selftests/bpf: Add existing connection bpf_*_ct_lookup() test bpftool: Clear errno after libcap's checks bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation bpftool: Fix a typo in a comment libbpf: Add names for auxiliary maps bpf: Use bpf_map_area_alloc consistently on bpf map creation bpf: Make __GFP_NOWARN consistent in bpf map creation bpf: Use bpf_map_area_free instread of kvfree bpf: Remove unneeded memset in queue_stack_map creation libbpf: preserve errno across pr_warn/pr_info/pr_debug ... ==================== Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17selftests/bpf: Tests libbpf autoattach APIsHao Luo1-0/+23
Adds test for libbpf APIs that toggle bpf program auto-attaching. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220816234012.910255-2-haoluo@google.com
2022-08-16selftests/bpf: Add tests verifying bpf lsm userns_create hookFrederick Lawler1-0/+33
The LSM hook userns_create was introduced to provide LSM's an opportunity to block or allow unprivileged user namespace creation. This test serves two purposes: it provides a test eBPF implementation, and tests the hook successfully blocks or allows user namespace creation. This tests 3 cases: 1. Unattached bpf program does not block unpriv user namespace creation. 2. Attached bpf program allows user namespace creation given CAP_SYS_ADMIN privileges. 3. Attached bpf program denies user namespace creation for a user without CAP_SYS_ADMIN. Acked-by: KP Singh <kpsingh@kernel.org> Signed-off-by: Frederick Lawler <fred@cloudflare.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-08-16selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsmArtem Savkov1-1/+2
Use SYS_PREFIX macro from bpf_misc.h instead of hard-coded '__x64_' prefix for sys_setdomainname attach point in lsm test. Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220816055231.717006-1-asavkov@redhat.com
2022-08-15selftests/bpf: Add connmark read testDaniel Xu1-0/+3
Test that the prog can read from the connection mark. This test is nice because it ensures progs can interact with netfilter subsystem correctly. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/d3bc620a491e4c626c20d80631063922cbe13e2b.1660254747.git.dxu@dxuuu.xyz
2022-08-15selftests/bpf: Add existing connection bpf_*_ct_lookup() testDaniel Xu1-0/+18
Add a test where we do a conntrack lookup on an existing connection. This is nice because it's a more realistic test than artifically creating a ct entry and looking it up afterwards. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/de5a617832f38f8b5631cc87e2a836da7c94d497.1660254747.git.dxu@dxuuu.xyz
2022-08-10selftests/bpf: Ensure sleepable program is rejected by hash map iterHou Tao1-0/+9
Add a test to ensure sleepable program is rejected by hash map iterator. Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220810080538.1845898-10-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-10selftests/bpf: Add write tests for sk local storage map iteratorHou Tao1-2/+20
Add test to validate the overwrite of sock local storage map value in map iterator and another one to ensure out-of-bound value writing is rejected. Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20220810080538.1845898-9-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-10selftests/bpf: add destructive kfunc testArtem Savkov1-0/+14
Add a test checking that programs calling destructive kfuncs can only do so if they have CAP_SYS_BOOT capabilities. Signed-off-by: Artem Savkov <asavkov@redhat.com> Link: https://lore.kernel.org/r/20220810065905.475418-4-asavkov@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-09selftests/bpf: Add test for prealloc_lru_pop bugKumar Kartikeya Dwivedi1-0/+49
Add a regression test to check against invalid check_and_init_map_value call inside prealloc_lru_pop. The kptr should not be reset to NULL once we set it after deleting the map element. Hence, we trigger a program that updates the element causing its reuse, and checks whether the unref kptr is reset or not. If it is, prealloc_lru_pop does an incorrect check_and_init_map_value call and the test fails. Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220809213033.24147-4-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-09selftests/bpf: add extra test for using dynptr data slice after releaseJoanne Koong1-1/+37
Add an additional test, "data_slice_use_after_release2", for ensuring that data slices are correctly invalidated by the verifier after the dynptr whose ref obj id they track is released. In particular, this tests data slice invalidation for dynptrs located at a non-zero offset from the frame pointer. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20220809214055.4050604-2-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-09selftests/bpf: Add BPF-helper test for CLOCK_TAI accessKurt Kanzenbach1-0/+24
Add BPF-helper test case for CLOCK_TAI access. The added test verifies that: * Timestamps are generated * Timestamps are moving forward * Timestamps are reasonable Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20220809060803.5773-3-kurt@linutronix.de Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 20:09:47 +0000