summaryrefslogtreecommitdiff
path: root/sound/soc/kirkwood
AgeCommit message (Collapse)AuthorFilesLines
2015-04-12Merge remote-tracking branches 'asoc/topic/jack', 'asoc/topic/jz4740' and ↵Mark Brown1-1/+1
'asoc/topic/kirkwood' into asoc-next
2015-03-22ASoC: kirkwood: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-11ASoC: kirkwood: fix struct clk pointer comparingShawn Guo1-1/+1
Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-10-20ASoC: kirkwood: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-29ASoC: kirkwood: Remove ARCH_KIRKWOOD dependencyAndrew Lunn1-1/+1
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Remove ARCH_KIRKWOOD since ARCH_MVEBU is sufficient. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-29ASoC: kirkwood: Remove unused driversAndrew Lunn4-246/+0
Both kirkwood-openrd and kirkwood-t5325 drivers have been replaced with DT based simple-card equivelents. So remove these drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28ASoC: kirkwood: implement NO_PERIOD_WAKEUP supportRussell King2-8/+12
Permit ALSA to run without hardware interrupts from the audio interface. Instead, ALSA will use a kernel timer to decide when to check the buffer state, resulting in a lighter workload for the CPU. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28ASoC: kirkwood: allow smaller audio periods and smaller number of periodsRussell King1-2/+2
There is no hardware restriction requiring a minimum of 8 periods, or a minimum of 2048 bytes in a period. Let's drop these values so that userspace has more flexibility in choosing these parameters. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28ASoC: kirkwood-i2s: fix pause handling some moreRussell King1-1/+1
We still see the occasional timeout waiting for busy to clear. As the spec is contradictory, and we know that the current implementation doesn't work, try an alternative interpretation from the spec. This one appears to work - I have yet to find any issue with it during my testing over several months. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28ASoC: kirkwood-i2s: fix mute handlingRussell King1-1/+11
The spec requires that the mute bits must be set while the channel is disabled. Ensure that this is the case by providing a helper which ensures that the appropriate mute bit is set while the enable bit is clear. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28ASoC: kirkwood-i2s: fix RECCTL maskingRussell King1-1/+2
Since we wish to disable capture inputs for some formats, we need to ensure that we clear the enable bits in our cached record control register. This seems to have been missed, resulting in the register only accumulating enable bits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28ASoC: kirkwood-i2s: provide helper KIRKWOOD_RECCTL_ENABLE_MASK definitionRussell King2-4/+6
Add a KIRKWOOD_RECCTL_ENABLE_MASK definition to complement the existing PLAYCTL definition, and make use of it where we wish to clear both enable bits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19ASoC: Remove needless snd_soc_dapm_enable_pin() from machine driver initsJarkko Nikula1-13/+0
ALSA SoC core marks widgets as connected by default when they are initialized in snd_soc_dapm_new_control() so there is no need to call snd_soc_dapm_enable_pin() from machine driver init functions. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-03-18ASoC: add S/PDIF support to Armada 370 DB ASoC driverThomas Petazzoni2-0/+29
The Armada 370 DB board not only has analog audio input/output, but also S/PDIF input/output. This commit adds support for S/PDIF in the ASoC machine driver of the Armada 370 DB platform, and adjusts the Device Tree bindings documentation accordingly. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24drivers: Enable building of Kirkwood drivers for mach-mvebuAndrew Lunn1-1/+1
With the move of kirkwood into mach-mvebu, drivers Kconfig need tweeking to allow the kirkwood specific drivers to be built. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <cooloney@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-14sound: ASoC: add ASoC board driver for Armada 370 DBThomas Petazzoni3-0/+130
This commit adds a simple ASoC board driver fo the Armada 370 Development Board, which connects the audio unit of the Armada 370 SoC to the I2C-based CS42L51. For now, only the analog audio input and output through the CS42L51 are supported, but a followup patch adds S/PDIF support to this driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-11ASoC: kirkwood: enable Kirkwood driver for mvebu platformsThomas Petazzoni2-1/+2
The audio unit found in the Armada 370 SoC is similar to the one used in the Marvell Kirkwood and Marvell Dove SoCs. Therefore, this commit allows the Kirkwood audio driver to be built on mvebu platforms, and adds an additional compatible string to identify the Armada 370 variant of the audio unit. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-16Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', ↵Mark Brown1-16/+0
'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai
2014-01-09ASoC: kirkwood: Don't set unused struct snd_pcm_hardware fieldsLars-Peter Clausen1-16/+0
The ASoC core assumes that the PCM component of the ASoC card transparently moves data around and does not impose any restrictions on the memory layout or the transfer speed. It ignores all fields from the snd_pcm_hardware struct for the PCM driver that are related to this. Setting these fields in the PCM driver might suggest otherwise though, so rather not set them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17ASoC: kirkwood: Fix the CPU DAI ratesJean-Francois Moine1-12/+12
This patch fixes the rates declared in the CPU DAI parameters: - SNDRV_PCM_RATE_KNOT and the discrete rates SNDRV_PCM_RATE_xxx should not be used with SNDRV_PCM_RATE_CONTINUOUS, - SNDRV_PCM_RATE_CONTINUOUS asks for rate_min and rate_max, - the device may do streaming down to 5512Hz. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: kirkwood: Fix erroneous double output while playingJean-Francois Moine1-5/+5
This patch fixes the setting of the register KIRKWOOD_PLAYCTL which did always streaming on both I2S and SPDIF, ignoring the DAI ID. The bug was introduced by the commit 75b9b65ee5a "ASoC: kirkwood: add S/PDIF support" Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: kirkwood: Fix invalid S/PDIF formatJean-Francois Moine1-4/+8
This patch removes the 32 bits format which is not supported by S/PDIF output. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-6/+3
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-10-31DMA-API: sound: fix dma mask handling in a lot of driversRussell King1-6/+3
This code sequence is unsafe in modules: static u64 mask = DMA_BIT_MASK(something); ... if (!dev->dma_mask) dev->dma_mask = &mask; as if a module is reloaded, the mask will be pointing at the original module's mask address, and this can lead to oopses. Moreover, they all follow this with: if (!dev->coherent_dma_mask) dev->coherent_dma_mask = mask; where 'mask' is the same value as the statically defined mask, and this bypasses the architecture's check on whether the DMA mask is possible. Fix these issues by using the new dma_coerce_coherent_and_mask() function. Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-25ASoC: kirkwood: Fix compile error due to patch 'add S/PDIF support'Jean-Francois Moine1-1/+1
This patch fixes the compilation error of kirkwood-i2s.c introduced by the commit 75b9b65ee5a80e99e 'ASoC: kirkwood: add S/PDIF support'. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-22ASoC: kirkwood: add S/PDIF supportJean-Francois Moine3-19/+84
This patch adds S/PDIF input/output for mvebu DT boards. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20ASoC: kirkwood: prefer external clock over internal clockJean-Francois Moine1-1/+1
When there is an external clock, always use this one. This prevents the two Dove audio devices to use the same DCO clock at different rates. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-01ASoC: kirkwood: fix compilation warning in kirkwood_dma_openVladimir Murzin1-1/+1
writel() supposes the first argument of type unsigned int. This fix the warning: sound/soc/kirkwood/kirkwood-dma.c: In function 'kirkwood_dma_open': sound/soc/kirkwood/kirkwood-dma.c:164:3: warning: large integer implicitly truncated to unsigned type [-Woverflow] Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26ASoc: kirkwood: Extend the min and max number of bytes per periodJean-Francois Moine1-2/+2
This patch extends the min and max number of bytes per period. It mainly permits to reduce the sound delay in MIDI real-time playing. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-21ASoC: kirkwood: fix loss of external clock at probe timeJean-Francois Moine1-1/+4
At probe time, when the clock driver is not yet initialized, the external clock of the kirkwood sound device will not be usable. This patch fixes this problem defering the device probe. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17ASoC: kirkwood-dma: remove IEC958_SUBFRAME formatsRussell King1-3/+1
The Audio block does not support IEC958 subframes as formatted by ALSA: they're very close, but not close enough. The formats differ by: 3 2 2 2 1 1 1 8 4 0 6 2 8 4 0 PCUVDDDDDDDDDDDDDDDD....AAAATTTT - IEC958 subframe PCUV0000........DDDDDDDDDDDDDDDD - Audio block format Where P = parity, C = channel status, U = user data, V = validity, D = sample data, A = aux, T = preamble. As can be seen, the position of the sample is in a different position, and the audio block does not have the aux or preamble bits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-06ASoC: kirkwood: change the compatible string of the kirkwood-i2s driverThomas Petazzoni1-1/+2
The compatible string of the kirkwood-i2s driver was chosen as "marvell,mvebu-audio". Using such a compatible string is not a good idea, since "mvebu" is the name of a large family of SOCs, in which new, unknown SOCs will be coming in the future. It is therefore impossible to know what will be evolutions of this hardware block in the next generations of the SOCs. For this reason, the recommandation for compatible strings of on-SOCs devices has always been to use the name of the oldest SOC that has the hardware block. New SOCs that have an exactly compatible hardware block can reference it using the same compatible string. See [1], [2] and [3] for various cases were this suggestion was made, including from Rob Herring, a Device Tree binding maintainer. As an example, there are already small differences between current generations: * On Kirkwood, only one interrupt is used for audio. * On Dove, two interrupts are used, one for audio data and one for error reporting. In the near future, I'll be adding audio support to Armada 370, which allows has the same hardware block (but maybe with minor variants). Therefore, this patch changes the driver to accept "marvell,kirkwood-audio" and "marvell,dove-audio" as compatible strings instead of the too-generic "marvell,mvebu-audio". The reason for the two different compatible strings is the difference in the number of interrupts used by the two SOCs for audio. This Device Tree binding has never been part of a Linux kernel stable release so far, so it can be changed now without breaking backward compatibility. [1] http://lists.infradead.org/pipermail/linux-mtd/2012-March/040417.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/161065.html [3] http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/087702.html Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27ASoc: kirkwood: Use the Kirkwood audio driver in Dove boardsJean-Francois Moine1-2/+2
This patch permits the generation of the Kirkwood audio driver which may be used in the Dove boards. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22ASoc: kirkwood: add DT support to the mvebu audio subsystemJean-Francois Moine1-6/+20
This patch adds DT support to the audio subsystem of the mvebu family (Kirkwood, Dove, Armada 370). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05ASoC: kirkwood: move calculation of max buffer size to kirkwood.hRussell King2-1/+3
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05ASoC: kirkwood: combine kirkwood-i2s and kirkwood-dma driversRussell King7-46/+24
These really should be a single driver because they're fully integrated in hardware. Make them so. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05ASoC: kirkwood: provide KIRKWOOD_PLAYCTL_ENABLE_MASKRussell King2-7/+8
Provide a helper macro which includes the sum of all enable bits in the playback control register. This simplifies the code a little. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05ASoC: kirkwood: Free external clock if it is a duplicate of internalRussell King1-0/+1
[Remaining patch from "ASoC: kirkwood: use devm_clk_get() for the external clock" -- broonie] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05ASoC: kirkwood: merge struct kirkwood_dma_priv with struct kirkwood_dma_dataRussell King2-54/+24
Merge these two structures together; nothing other than the I2S and DMA driver makes use of struct kirkwood_dma_data, and it's not like struct kirkwood_dma_data is really just used to convey DMA specific data to the backend; it's more a general shared structure between the two halves. This will later allow kirkwood-dma.c and kirkwood-i2s.c to be merged together. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16ASoC: kirkwood-i2s: fix a compilation warningJean-Francois Moine1-3/+5
In the function kirkwood_set_rate, when the rate cannot be satisfied by the internal nor by an external clock, the clock source in undefined: warning: ‘clks_ctrl’ may be used uninitialized in this function The ALSA subsystem should never gives such a rate because: - the rates with the internal clock are limited to 44.1, 48 and 96 kHz as specified by the kirkwood_i2s_dai structure, - the other rates are proposed in the structure kirkwood_i2s_dai_extclk only when the external clock is present. In case of programming error (bad rate for internal clock and no external clock), the function will simply cause a backtrace. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16ASoC: kirkwood-i2s: Inline KIRKWOOD_I2S_RATESMark Brown1-5/+4
The addition of extclk support makes this misleading as it's only the rates used when there is no extclk so put it in the specific DAI it applies to. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16ASoC: kirkwood-i2s: Remove empty remove()Mark Brown1-7/+0
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: kirkwood-i2s: Use devm_clk_get() for extclkMark Brown1-8/+3
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: kirkwood: Enable build on non-Kirkwood platformsMark Brown1-3/+3
Improve build coverage by enabling build on other platforms if COMPILE_TEST is enabled. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: kirkwood: Remove unused headersMark Brown2-4/+0
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-17Merge remote-tracking branch 'asoc/topic/kirkwood' into asoc-nextMark Brown1-1/+1
2013-05-18sound/soc/kirkwood: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-15ASoC: kirkwood-dma: Staticize non exported structLars-Peter Clausen1-1/+1
The kirkwood_dma_ops struct is not used outside of kirkwood-dma.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: switch over to use snd_soc_register_component() on kirkwood i2sKuninori Morimoto1-3/+8
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>