summaryrefslogtreecommitdiff
path: root/sound/soc/jz4740
AgeCommit message (Collapse)AuthorFilesLines
2020-10-26ASoC: jz4740-i2s: Remove manual DMA peripheral ID assignmentLars-Peter Clausen1-5/+0
All platforms that use the jz4740-i2s driver have been switched to devicetree for a while now and the assignment of the DMA peripheral ID is done in the devicetree. It is no longer necessary to manually assign the peripheral ID in the driver, so remove that. The DMA driver does not even look at the value assigned in the driver anymore and always uses the value provided by the devicetree. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201023092346.5777-1-lars@metafoo.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28ASoC: ingenic: Unconditionally depend on devicetreePaul Cercueil2-4/+2
All boards with Ingenic SoCs probe with devicetree already, we have no use for a non-devicetree path. This solves some compilation warnings that were caused by unused variables in the case where CONFIG_OF was disabled. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200523125455.12392-1-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-18ASoC: jz4740: use snd_soc_xxx_active()Kuninori Morimoto1-4/+4
We have snd_soc_dai/dai_stream/component_active() macro This patch uses it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87sgg258io.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-24ASoC: jz4740-i2s: Add support for the JZ4770Paul Cercueil1-3/+10
Before the JZ4770, the playback and capture sampling rates had to match. The JZ4770 supports independent sampling rates for both. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200306222931.39664-6-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-24ASoC: jz4740-i2s: Add support for the JZ4760Paul Cercueil1-9/+12
The change of offset for the {rx,tx}_threshold fields in the conf register predates the JZ4780, and was first introduced in the JZ4760. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200306222931.39664-5-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-13Merge branch 'for-5.6' of ↵Mark Brown1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.7
2020-03-09ASoC: jz4740-i2s: Avoid passing enum as match dataPaul Cercueil1-13/+23
Instead of passing an enum as match data, and checking its value in the probe to register one or the other dai, pass a pointer to a struct i2s_soc_info, which contains all the information relative to one SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200306222931.39664-4-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-09ASoC: jz4740-i2s: Add local dev variable in probe functionPaul Cercueil1-9/+9
Make the code cleaner by using a "struct device *dev" variable instead of dereferencing it everytime from within the struct platform_device. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200306222931.39664-3-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-09ASoC: jz4740-i2s: Fix divider written at incorrect offset in registerPaul Cercueil1-1/+1
The 4-bit divider value was written at offset 8, while the jz4740 programming manual locates it at offset 0. Fixes: 26b0aad80a86 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-21ASoC: jz4740: jz4740-i2s: move .suspend/.resume to componentKuninori Morimoto1-10/+8
There is no big difference at implementation for .suspend/.resume between DAI driver and Component driver. But because some driver is using DAI version, thus ALSA SoC needs to keep supporting it, hence, framework becoming verbose. If we can switch all DAI driver .suspend/.resume to Component driver, we can remove verbose code from ALSA SoC. Driver is getting its private data via dai->dev. But dai->dev and component->dev are same dev, thus, we can convert these. For same reason, we can convert dai->active to component->active if necessary. This patch moves DAI driver .suspend/.resume to Component driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/878sm3ym4j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-09ASoC: jz4740: Remove unused match variableStephen Boyd1-1/+0
After commit 67ad656bdd70 ("ASoC: jz4740: Use of_device_get_match_data()"), the match local variable is unused and the compiler rightly warns. sound/soc/jz4740/jz4740-i2s.c: In function 'jz4740_i2s_dev_probe': sound/soc/jz4740/jz4740-i2s.c:500:29: warning: unused variable 'match' [-Wunused-variable] 500 | const struct of_device_id *match; Drop it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: <alsa-devel@alsa-project.org> Fixes: 67ad656bdd70 ("ASoC: jz4740: Use of_device_get_match_data()") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191008235212.228856-1-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07ASoC: jz4740: Use of_device_get_match_data()Stephen Boyd1-3/+2
This probe function is only called if the device is backed by a DT node, so switch this call to of_device_get_match_data() to reduce code size and simplify a bit. This also avoids needing to reference a potentially undefined variable because of_device_get_match_data() doesn't need to know anything beyond the struct device to find the match table. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: <alsa-devel@alsa-project.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191004214334.149976-8-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-30ASoC: jz4740: Drop lb60 board codePaul Cercueil3-134/+2
The board now uses the simple-audio-card driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-06-26Merge tag 'v5.2-rc6' into asoc-5.3Mark Brown5-24/+5
Linux 5.2-rc6
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 239Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.276825629@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-06ASoC: jz4740: qi_lb60: use modern dai_link styleKuninori Morimoto1-4/+6
ASoC is now supporting modern style dai_link (= snd_soc_dai_link_component) for CPU/Codec/Platform. This patch switches to use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 151Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.655028468@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-20ASoC: jz4740: Depend on MIPS instead of MACH_JZ4740Paul Cercueil1-1/+1
Depending on MACH_JZ4740 prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-26ASoC: jz4740: Handle return value of clk_prepare_enable.Arvind Yadav1-4/+17
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-14ASoC: jz4740: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09ASoC: jz4740: Add jz4780 supportZubair Lutfullah Kakakhel1-10/+74
The jz4780 and jz4740 have very similar i2s blocks. The slight difference is in Rx/Tx fifos. And the bitclocks for input/output are different. This patch adds jz4780 support to the driver Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-04ASoC: jz4740: Add DT support to jz4740-i2s driverZubair Lutfullah Kakakhel1-0/+10
This patch adds device tree support for the jz4740 driver. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-04ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2sZubair Lutfullah Kakakhel1-1/+10
The div clock register is not modified during jz4740_i2s_hw_params. Hence, default sampling rates are actually used regardless of sampling rates input from userspace. This patch adds support to calculate the value of the divider from the parameters passed from userspace and update the relevant div registers Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-25ASoC: qi_lb60: Pass flags to gpiod_get()Lars-Peter Clausen1-9/+2
Pass flags to gpiod_get() to automatically configure the GPIOs. This is shorter and not passing any flags to gpiod_get() will eventually no longer be supported. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20ASoC: jz4740: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22Merge remote-tracking branches 'asoc/topic/headers', 'asoc/topic/intel', ↵Mark Brown3-58/+42
'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/max98095', 'asoc/topic/mc13783' and 'asoc/topic/multicodec' into asoc-next
2014-04-23ASoC: jz4740: Improve build test coverageLars-Peter Clausen2-5/+11
Allow the jz4740 audio drivers to be build when CONFIG_COMPILE_TEST is selected. This should improve the build test coverage. There is one small piece of platform dependent code in the jz4740-i2s driver. It uses the DMA request type constants which are defined in a platform specific header. We can solve this by moving them from the platform specific header to the I2S driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23ASoC: qi_lb60: Use GPIO descriptor APILars-Peter Clausen1-26/+28
The new GPIO descriptor API is now the preferred way for handling GPIOs. It also allows us to separate the platform depended code from the platform independent code (Which will make it possible to increase build test coverage of the platform independent code). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22ASoC: qi_lb60: Use devm_snd_soc_register_card()Lars-Peter Clausen1-4/+1
Makes the code a bit shorter and will also allow us to remove the drivers remove() callback eventually. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22ASoC: qi_lb60: Set .dai_fmt instead of calling snd_soc_set_dai_fmt()Lars-Peter Clausen1-21/+2
Rather than calling snd_soc_set_dai_fmt(), just set the dai_fmt field in the dai_link struct. Both have the same effect, but the later is a bit shorter and also allows us to remove the now unused init callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22ASoC: qi_lb60: Set fully_routed flagLars-Peter Clausen1-3/+1
The routes for this sound card are fully specified, so set the fully_routed flag. This allows us to remove the manual snd_soc_dapm_nc_pin() calls. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22ASoC: jz4740: Remove Makefile entry for removed fileLars-Peter Clausen1-2/+0
Commit 0406a40a0 ("ASoC: jz4740: Use the generic dmaengine PCM driver") jz4740-pcm.c file, but neglected to remove the Makefile entries. Fixes: 0406a40a0 ("ASoC: jz4740: Use the generic dmaengine PCM driver") Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03ASoC: jz4740: Use the generic dmaengine PCM driverLars-Peter Clausen5-411/+24
Now that there is a dmaengine driver for the jz4740 DMA core we can use the generic dmaengine PCM driver. This allows us to remove the custom jz4740-pcm code completely. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03ASoC: jz4740-i2s: Use managed resourcesLars-Peter Clausen1-70/+15
Makes the code a bit shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-31DMA-API: sound: fix dma mask handling in a lot of driversRussell King1-8/+4
This code sequence is unsafe in modules: static u64 mask = DMA_BIT_MASK(something); ... if (!dev->dma_mask) dev->dma_mask = &mask; as if a module is reloaded, the mask will be pointing at the original module's mask address, and this can lead to oopses. Moreover, they all follow this with: if (!dev->coherent_dma_mask) dev->coherent_dma_mask = mask; where 'mask' is the same value as the statically defined mask, and this bypasses the architecture's check on whether the DMA mask is possible. Fix these issues by using the new dma_coerce_coherent_and_mask() function. Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-12ASoC: jz4740-i2s: Use clk_prepare_enable/clk_disable_unprepareLars-Peter Clausen1-8/+8
In preparation to switching the jz4740 clk driver to the common clk framework update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: jz4740: Remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: switch over to use snd_soc_register_component() on jz4740 i2sKuninori Morimoto1-2/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10ASoC: jz4740: remove __dev* attributesBill Pemberton3-9/+9
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: JZ4740: Replaced comma operators with semicolons.Maarten ter Huurne1-2/+2
They were harmless but also unnecessary, probably a leftover from earlier code. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: jz4740: Convert qi_lb60 to use snd_soc_register_card()Axel Lin1-30/+26
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-07ASoC: check for substream not channels_min in pcm enginesJoachim Eastwood1-3/+2
This is a follow up on 53dea36c70c1857 which fixes the other affected pcm engines. Description from 53dea36c70c1857: Don't rely on the codec's channels_min information to decide wheter or not allocate a substream's DMA buffer. Rather check if the substream itself was allocated previously. Without this patch I was seeing null-pointer dereferenc in atmel-pcm. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-23ASoC: jz4740: Add .owner to struct snd_soc_cardAxel Lin1-0/+1
Add missing .owner of struct snd_soc_card. This prevents the module from being removed from underneath its users. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-24ASoC: Convert jz4740 directory to module_platform_driverAxel Lin2-22/+2
Factor out some boilerplate code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen1-1/+1
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-21ASoC: Staticise jz4740_pcm_new()Axel Lin1-1/+1
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood1-2/+4
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 10:20:29 +0000