summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm8962.c
AgeCommit message (Collapse)AuthorFilesLines
2011-01-31ASoC: Accept any logical value for WM8962 GPIO set()Mark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-17ASoC: Avoid direct register cache access when setting defaultsMark Brown1-10/+20
Directly accessing the register cache means that we can't use anything except a flat register cache so use snd_soc_update_bits(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-13ASoC: Update users of readable_register()/volatile_register()Dimitris Papastamos1-2/+2
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-28Merge branch 'for-2.6.37' into for-2.6.38Mark Brown1-25/+20
2010-12-28ASoC: codecs: wm8962: Fix register cache incoherencyLars-Peter Clausen1-25/+20
The multi-component patch(commit f0fba2ad1) moved the allocation of the register cache from the driver to the ASoC core. Most drivers where adjusted to this, but the wm8962 driver still uses its own register cache for its private functions, while functions from the ASoC core use the generic cache. Thus we end up with two from each other incoherent caches, which can lead to undefined behaviour. This patch fixes the issue by changing the wm8962 driver to use the generic register cache in its private functions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org (for 2.6.37 only)
2010-12-28ASoC: One more x86 typo fixMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-27ASoC: Fix typo in x86 workaroundMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-23ASoC: ifdef out trace points from modules for x86Mark Brown1-0/+2
No idea why this works on ARM but not x86. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-22ASoC: Trace Wolfson jack detection IRQsMark Brown1-0/+3
Add jack detection interrupt trace to Wolfson CODEC drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08Merge branch 'for-2.6.37' into for-2.6.38Mark Brown1-1/+1
Conflicts: sound/soc/soc-core.c Axel's fix on two different branches.
2010-12-07ASoC: Correct WM8962 interrupt mask register readMark Brown1-1/+1
Fix mismerge from the out of tree BSP where this support was developed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-22ASoC: Do not include soc-dapm.hJarkko Nikula1-1/+0
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-16ASoC: Fix incorrect kfree in wm8962_probe error pathAxel Lin1-1/+0
We allocated memory for wm8962 in wm8962_i2c_probe, and will free the memory in either wm8962_i2c_probe error path or wm8962_i2c_remove. Thus we should not call kfree(wm8962) in wm8962_probe, otherwise we have double free of wm8962. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-12ASoC: Reset WM8962 with default ID valueMark Brown1-1/+1
The value makes no odds and it makes life easier with caches. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-06ASoC: Decouple DAPM from CODECsLiam Girdwood1-14/+16
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05Merge branch 'for-2.6.37' into HEADMark Brown1-1/+4
2010-11-03ASoC: Use pm_wakeup_event() in WM8962 jack detectionMark Brown1-0/+2
Ensure that the system does not suspend while we process a WM8962 jack event by using pm_wakeup_event() to block the suspend while we're waiting for the jack to settle. Use a slightly longer timeout than the jack waits to allow for other stuff to take over and delays in scheduling. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-03ASoC: Check return value of strict_strtoul() in WM8962Mark Brown1-1/+4
strict_strtoul() has been made __must_check so do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Add WM8962 microphone bias controlMark Brown1-0/+2
We unconditionally require SYSCLK since while only microphone detection specifically requires SYSCLK any actual use case would enable it via some other means but microphone detection may have nothing active other than the bias itself. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-11ASoC: Compress WM8962 register access mapMark Brown1-0/+1147
Reduce the source code size still futher by only specifying non-zero rows in the WM8962 access map. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-11ASoC: Shrink code size for WM8962 register defaults tableMark Brown1-0/+687
Dramatically reduce the code size for the WM8962 register defaults table by switching to explicitly initialise only defined registers, relying on static defaulting to zero for the overwelming bulk of the register map. Similar treatement for the register access table will come later and will produce a similarly dramatic code size shrink. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02ASoC: Put WM8962 GPIO2/3 into GPIO mode when configuring platform data tooMark Brown1-13/+29
GPIO2 and GPIO3 on the WM8962 are MFPs and need to be put into GPIO mode before the GPIO block can be used to control them. We're already doing this when used via gpiolib, factor out the code for use when setting static configurations via platform data as well. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02ASoC: Implement interrupt based jack detectionMark Brown1-0/+85
Allow microphone detection on WM8962 to be performed using the interrupt signal, allowing the detection of both microphone presence and button presses with a signal singal from the CODEC to CPU. Currently a 250ms debounce time is applied to both short circuit and presence detection, this has not been optimised. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02ASoC: Add support for WM8962 GPIO outputsMark Brown1-0/+119
The WM8962 features five GPIOs, add support for controlling their output state via gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30ASoC: Relax restrictions on WM8962 BCLK configurationMark Brown1-6/+0
The restrictions on configuring BCLK are overly cautious, other constraints in the system should ensure that reconfiguration is not possible when the device is sufficiently active to be unable to support reclocking. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30ASoC: Provide microphone bias configuration for WM8962Mark Brown1-0/+12
Add the widget for MICBIAS power control and allow configuration of the microphone bias setup via the platform data for the WM8962. When microphone status signals are brought out to GPIO this should be sufficient to enable microphone detection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-29ASoC: Initial WM8962 IRQ supportMark Brown1-1/+59
Provide an initial hookup for interrupts on the WM8962. Currently we simply report error status via log messages if an IRQ is provided for the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-29ASoC: Lowercase WM8962 CODEC nameMark Brown1-1/+1
For consistency. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-28ASoC: Fix masking of WM8962 FLL1 registerMark Brown1-1/+1
When configuring the FLL we preserve the FLL enable configuration in order to allow us to reenable the FLL after configuration but we do not clear the other bits in the register, causing old configuration to be preserved. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-21ASoC: Fix merge issue with WM8962 control additionMark Brown1-2/+0
Let's not add the core controls twice. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-11ASoC: Fix off-by-one bug in WM8962 register cache size configurationDimitris Papastamos1-1/+1
This is a simple off-by-one bug, the size of the register cache is incorrectly set to the maximum register index. Fix it by adding one. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-12ASoC: Update WM8962 to build with multi-componentMark Brown1-121/+47
No notable changes, currently build tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-05ASoC: Add initial WM8962 CODEC driverMark Brown1-0/+1933
The WM8962 is a low power, high performance stereo CODEC designed for portable digital audio applications. This initial driver release supports the key audio paths of the WM8962. Extended functionality, such as microphone detection, digital microphones and the advanced DSP signal enhancements provided by the device are not yet supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-08 00:02:56 +0000