summaryrefslogtreecommitdiff
path: root/scripts/kconfig/symbol.c
AgeCommit message (Collapse)AuthorFilesLines
2012-11-20kconfig: Fix malloc handling in conf toolsAlan Cox1-6/+6
(and get them out of the noise in the audit work) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-26kconfig: fix new choices being skipped upon config updateArnaud Lacombe1-1/+8
Running `oldconfig' after any of the following configuration change: either trivial addition, such as: config A bool "A" choice prompt "Choice ?" depends on A config CHOICE_B bool "Choice B" config CHOICE_C bool "Choice C" endchoice or more tricky change: OLD KCONFIG | NEW KCONFIG | | config A | bool "A" | choice | choice prompt "Choice ?" | prompt "Choice ?" | config CHOICE_C | config CHOICE_C bool "Choice C" | bool "Choice C" | config CHOICE_D | config CHOICE_D bool "Choice D" | bool "Choice D" endchoice | | config CHOICE_E | bool "Choice E" | depends on A | endchoice will not cause the choice to be considered as NEW, and thus not be asked. The cause of this behavior is that choice's novelty are computed statically right after the saved configuration has been read. At this point, the new dependency's value is still unknown and asserted to be `no'. Moreover, no update to this decision is made afterward. Correct this by dynamically evaluating a choice's novelty, and removing the static evaluation. Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-01kconfig: introduce specialized printerArnaud Lacombe1-1/+45
Make conf_write_symbol() grammar agnostic to be able to use it from different code path. These path pass a printer callback which will print a symbol's name and its value in different format. conf_write_symbol()'s job become mostly only to prepare a string for the printer. This avoid to have to pass specialized flag to generic functions Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx macro)] Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-06-06kconfig: nuke LKC_DIRECT_LINK cruftArnaud Lacombe1-1/+0
This interface is not (and has never been ?) used by any frontend, just get rid of it. Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-01-10Merge branch 'kconfig' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: nconf: handle comment entries within choice/endchoice kconfig: fix warning kconfig: Make expr_copy() take a const argument kconfig: simplify select-with-unmet-direct-dependency warning kconfig: add more S_INT and S_HEX consistency checks kconfig: fix `zconfdebug' extern declaration kconfig/conf: merge duplicate switch's case kconfig: fix typos kbuild/gconf: add dummy inline for bind_textdomain_codeset() kbuild/nconf: fix spaces damage kconfig: nuke second argument of conf_write_symbol() kconfig: do not define AUTOCONF_INCLUDED kconfig: the day kconfig warns about "select"-abuse has come
2010-12-21kconfig: simplify select-with-unmet-direct-dependency warningArnaud Lacombe1-1/+5
This is an attempt to simplify the expressing printed by kconfig when a symbol is selected but still has direct unmet dependency. First, the symbol reverse dependency is split in sub-expression. Then, each sub-expression is checked to ensure that it does not contains the unmet dependency. This removes the false-positive symbols and fixed symbol which already have the correct dependency. Finally, only the symbol responsible of the "select" is printed, instead of its full dependency tree. CC: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15kconfig: fix typosArnaud Lacombe1-1/+1
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-01kconfig: sym_expand_string_value: allow for string termination when reallocingAndy Whitcroft1-1/+1
When expanding a parameterised string we may run out of space, this triggers a realloc. When computing the new allocation size we do not allow for the terminating '\0'. Allow for this when calculating the new length. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-12Revert "kconfig: Temporarily disable dependency warnings"Michal Marek1-2/+0
This reverts commit 71ebc01, which was a 2.6.36-only stopgap solution. Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-12Merge branch 'kbuild/rc-fixes' into kbuild/kconfigMichal Marek1-0/+2
We need to revert the temporary hack in 71ebc01, hence the merge.
2010-10-09kconfig: Temporarily disable dependency warningsMichal Marek1-0/+2
After fixing a use-after-free bug in kconfig, a 'make defconfig' or 'make allmodconfig' fills the screen with warnings that were not detected before. Given that we are close to the release now, disable the warnings temporarily and deal with them after 2.6.36. Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-30kconfig: Fix realloc usage()Michal Marek1-1/+1
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-19kconfig: add a symbol string expansion helperArnaud Lacombe1-0/+49
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-08-15kconfig: fix segfault when detecting recursive dependencySam Ravnborg1-0/+2
Following sample Kconfig generated a segfault: config FOO bool select PERF_EVENTS if HAVE_HW_BREAKPOINT config PERF_EVENTS bool config HAVE_HW_BREAKPOINT bool depends on PERF_EVENTS Fix by reverting back to a valid property if there was no property on the stack of symbols. The above pattern were seen in sh Kconfig. A fix for the Kconfig file has been sent to the sh folks. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03kconfig: add savedefconfigSam Ravnborg1-0/+74
savedefconfig will save a minimal config to a file named "defconfig". The config symbols are saved in the same order as they appear in the menu structure so it should be possible to map them to the relevant menus if desired. The implementation was tested against several minimal configs for arm which was created using brute-force. There was one regression related to default numbers which had their valid range further limited by another symbol. Sample: config FOO int "foo" default 4 config BAR int "bar" range 0 FOO If FOO is set to 3 then BAR cannot take a value higher than 3. But the current implementation will set BAR equal to 4. This is seldomly used and the final configuration is OK, and the fix was non-trivial. So it was documented in the code and left as is. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03kconfig: refactor code in symbol.cSam Ravnborg1-13/+33
Move logic to determine default for a choice to a separate function. No functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03kconfig: print more info when we see a recursive dependencyRoman Zippel1-15/+127
Consider following kconfig file: config TEST1 bool "test 1" depends on TEST2 config TEST2 bool "test 2" depends on TEST1 Previously kconfig would report: foo:6:error: found recursive dependency: TEST2 -> TEST1 -> TEST2 With the following patch kconfig reports: foo:5:error: recursive dependency detected! foo:5: symbol TEST2 depends on TEST1 foo:1: symbol TEST1 depends on TEST2 Note that we now report where the offending symbols are defined. This can be a great help for complex situations involving several files. Patch is originally from Roman Zippel with a few adjustments by Sam. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03kconfig: save location of config symbolsSam Ravnborg1-0/+2
When we add a new config symbol save the file/line so we later can refer to their location. The information is saved as a property to a config symbol because we may have multiple definitions of the same symbol. This has the side-effect that a symbol always has at least one property. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-08kconfig: Don't write invisible choice valuesJan Beulich1-12/+12
This makes it so "make oldconfig" really prompts for any choice where options that previously weren't visible just became so. Previously one would have to remember to go over all choice values and check whether some that previously couldn't be selected now can be. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-02kbuild: Warn on selecting symbols with unmet direct dependenciesCatalin Marinas1-0/+18
The "select" statement in Kconfig files allows the enabling of options even if they have unmet direct dependencies (i.e. "depends on" expands to "no"). Currently, the "depends on" clauses are used in calculating the visibility but they do not affect the reverse dependencies in any way. The patch introduces additional tracking of the "depends on" statements and prints a warning on selecting an option if its direct dependencies are not met. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-03-23kconfig: recalc symbol value before showing search resultsLi Zefan1-0/+1
A symbol's value won't be recalc-ed until we save config file or enter the menu where the symbol sits. So If I enable OPTIMIZE_FOR_SIZE, and search FUNCTION_GRAPH_TRACER: Symbol: FUNCTION_GRAPH_TRACER [=y] Prompt: Kernel Function Graph Tracer Defined at kernel/trace/Kconfig:140 Depends on: ... [=y] && (!X86_32 [=y] || !CC_OPTIMIZE_FOR_SIZE [=y]) ... From the dependency it should result in FUNCTION_GRAPH_TRACER=n, but it still shows FUNCTION_GRAPH_TRACER=y. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-02-02Improve kconfig symbol hashingAndi Kleen1-12/+17
While looking for something else I noticed that the symbol hash function used by kconfig is quite poor. It doesn't use any of the standard hash techniques but simply adds up the string and then uses power of two masking, which is both known to perform poorly. The current x86 kconfig has over 7000 symbols. When I instrumented it showed that the minimum hash chain length was 16 and a significant number of them was over 30. It didn't help that the hash table size was only 256 buckets. This patch increases the hash table size to a larger prime and switches to a FNV32 hash. I played around with a couple of hash functions, but that one seemed to perform best with reasonable hash table sizes. Increasing the hash table size even further didn't seem like a good idea, because there are a couple of global walks which walk the complete hash table. I also moved the unnamed bucket to 0. It's still the longest of all the buckets (44 entries), but hopefully it's not often hit except for the global walk which doesn't care. The result is a much nicer distribution: (first column bucket length, second number of buckets with that length) 1: 3505 2: 1236 3: 294 4: 52 5: 3 47: 1 <--- this is the unnamed symbols bucket There are still some 5+ buckets, but increasing the hash table even more would be likely not worth it. This also cleans up the code slightly by removing hard coded magic numbers. I didn't notice a big performance difference either way on my Nehalem system, but I presume it'll help somewhat on slower systems. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-09-20kbuild: add static to prototypesTrevor Keith1-3/+3
Warnings found via gcc -Wmissing-prototypes. Signed-off-by: Trevor Keith <tsrk@tsrk.net> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28kconfig: add named choice groupRoman Zippel1-13/+11
As choice dependency are now fully checked, it's quite easy to add support for named choices. This lifts the restriction that a choice value can only appear once, although it still has to be within the same group, but multiple choices can be joined by giving them a name. While at it I cleaned up a little the choice type logic to simplify it a bit. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28kconfig: fix choice dependency checkRoman Zippel1-18/+76
Properly check the dependency of choices as a group. Also fix that sym_check_deps() correctly terminates the dependency loop error check (otherwise it would continue printing the dependency chain). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-13kconfig: fix select in combination with defaultRoman Zippel1-13/+21
> The attached .config (with current -git) results in a compile > error since it contains: > > CONFIG_X86=y > # CONFIG_EMBEDDED is not set > CONFIG_SERIO=m > CONFIG_SERIO_I8042=y > > Looking at drivers/input/serio/Kconfig I simply don't get how this > can happen. You've hit the rather subtle rules of select vs default. What happened is that SERIO is selected to m, but SERIO_I8042 isn't selected so the default of y is used instead. We already had the problem in the past that select and default don't work well together, so this patch cleans this up and makes the rule hopefully more straightforward. Basically now the value is calculated like this: (value && dependency) || select where the value is the user choice (if available and the symbol is visible) or default. In this case it means SERIO and SERIO_I8042 are both set to y due to their default and if SERIO didn't had the default, then the SERIO_I8042 value would be limited to m due to the dependency. I tested this patch with more 10000 random configs and above case is the only the difference that showed up, so I hope there is nothing that depended on the old more complex and subtle rules. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Tested-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: use environment optionRoman Zippel1-15/+0
Use the environment option to provide the ARCH symbol and the KERNELVERSION symbol. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: environment symbol supportRoman Zippel1-0/+45
Add the possibility to import a value from the environment into kconfig via the option syntax. Beside flexibility this has the advantage providing proper dependencies. Documented the options syntax. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: explicitly introduce expression listRoman Zippel1-6/+7
Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: rename E_OR & friends to avoid name clashSam Ravnborg1-3/+3
We had macros named the same as a set of enumeration values. It is legal code but very confusing to read - so rename the macros from E_* to EXPR_* Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-05-06kconfig: error out if recursive dependencies are foundSam Ravnborg1-8/+5
Sample: config FOO bool "This is foo" depends on BAR config BAR bool "This is bar" depends on FOO This will result in following error message: error: found recursive dependency: FOO -> BAR -> FOO And will then exit with exit code equal 1 so make will stop. Inspired by patch from: Adrian Bunk <bunk@stusta.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: Roman Zippel <zippel@linux-m68k.org>
2006-12-13[PATCH] kconfig: make sym_change_count static, let it be altered by 2 ↵Karsten Wiese1-2/+1
functions only Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-09kconfig: add defconfig_list/module optionRoman Zippel1-7/+8
This makes it possible to change two options which were hardcoded sofar. 1. Any symbol can now take the role of CONFIG_MODULES 2. The more useful option is to change the list of default file names, which kconfig uses to load the base configuration if .config isn't available. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09kconfig: allow loading multiple configurationsRoman Zippel1-7/+6
Extend conf_read_simple() so it can load multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09kconfig: allow multiple default values per symbolRoman Zippel1-8/+8
Extend struct symbol to allow storing multiple default values, which can be used to hold multiple configurations. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09kconfig: remove SYMBOL_{YES,MOD,NO}Roman Zippel1-3/+3
The SYMBOL_{YES,MOD,NO} are not really used anymore (they were more used be the cml1 converter), so just remove them. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-16kbuild: create .kernelrelease at *config stepSam Ravnborg1-2/+2
To enable 'make kernelrelease' earlier now create .kernelrelease when one of the *config targets are used. Also introduce KERNELVERSION - only user is kconfig. KERNELVERSION was needed to display kernel version in menuconfig - KERNELRELEASE is not valid until configuration has completed. kconfig files modified to use KERNELVERSION. Bug reported by: Rene Rebe <rene@exactcode.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-11-09[PATCH] kconfig: allow variable argumnts for rangeRoman Zippel1-4/+54
This allows variable arguments in the range option for int and hex config symbols. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] kconfig: fix restart for choice symbolsRoman Zippel1-0/+11
The restart check whether new symbols became visible, didn't always work for choice symbols. Even if a choice symbol itself isn't changable, the childs are. This also requires to update the new status of all choice values, once one of them is set. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] kconfig: Fix Kconfig performance bugDavid Gibson1-3/+8
When doing its recursive dependency check, scripts/kconfig/conf uses the flag SYMBOL_CHECK_DONE to avoid rechecking a symbol it has already checked. However, that flag is only set at the top level, so if a symbol is first encountered as a dependency of another symbol it will be rechecked every time it is encountered until it's encountered at the top level. This patch adjusts the flag setting so that each symbol will only be checked once, regardless of whether it is first encountered at the top level, or while recursing down from another symbol. On complex configurations, this vastly speeds up scripts/kconfig/conf. The config in the powerpc merge tree is particularly bad: this patch reduces the time for 'scripts/kconfig/conf -o arch/powerpc/Kconfig' by a factor of 40 on a G5. That's even including the time to print the config, so the speedup in the actual checking is more likely 2 or 3 orders of magnitude. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+816
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 09:57:15 +0000